AcceptVpcPeeringConnection

$result = $client->acceptVpcPeeringConnection([/* ... */]);
$promise = $client->acceptVpcPeeringConnectionAsync([/* ... */]);

Accept a VPC peering connection request. To accept a request, the VPC peering connection must be in the pending-acceptance state, and you must be the owner of the peer VPC. Use the DescribeVpcPeeringConnections request to view your outstanding VPC peering connection requests.

Parameter Syntax

$result = $client->acceptVpcPeeringConnection([
    'DryRun' => true || false,
    'VpcPeeringConnectionId' => '<string>',
]);

Parameter Details

Result Syntax

[
    'VpcPeeringConnection' => [
        'AccepterVpcInfo' => [
            'CidrBlock' => '<string>',
            'OwnerId' => '<string>',
            'PeeringOptions' => [
                'AllowEgressFromLocalClassicLinkToRemoteVpc' => true || false,
                'AllowEgressFromLocalVpcToRemoteClassicLink' => true || false,
            ],
            'VpcId' => '<string>',
        ],
        'ExpirationTime' => <DateTime>,
        'RequesterVpcInfo' => [
            'CidrBlock' => '<string>',
            'OwnerId' => '<string>',
            'PeeringOptions' => [
                'AllowEgressFromLocalClassicLinkToRemoteVpc' => true || false,
                'AllowEgressFromLocalVpcToRemoteClassicLink' => true || false,
            ],
            'VpcId' => '<string>',
        ],
        'Status' => [
            'Code' => 'initiating-request|pending-acceptance|active|deleted|rejected|failed|expired|provisioning|deleting',
            'Message' => '<string>',
        ],
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'VpcPeeringConnectionId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AllocateAddress

$result = $client->allocateAddress([/* ... */]);
$promise = $client->allocateAddressAsync([/* ... */]);

Acquires an Elastic IP address.

An Elastic IP address is for use either in the EC2-Classic platform or in a VPC. For more information, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->allocateAddress([
    'Domain' => 'vpc|standard',
    'DryRun' => true || false,
]);

Parameter Details

Result Syntax

[
    'AllocationId' => '<string>',
    'Domain' => 'vpc|standard',
    'PublicIp' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

AllocateHosts

$result = $client->allocateHosts([/* ... */]);
$promise = $client->allocateHostsAsync([/* ... */]);

Allocates a Dedicated host to your account. At minimum you need to specify the instance size type, Availability Zone, and quantity of hosts you want to allocate.

Parameter Syntax

$result = $client->allocateHosts([
    'AutoPlacement' => 'on|off',
    'AvailabilityZone' => '<string>', // REQUIRED
    'ClientToken' => '<string>',
    'InstanceType' => '<string>', // REQUIRED
    'Quantity' => <integer>, // REQUIRED
]);

Parameter Details

Result Syntax

[
    'HostIds' => ['<string>', ...],
]

Result Details

Errors

There are no errors described for this operation.

AssignPrivateIpAddresses

$result = $client->assignPrivateIpAddresses([/* ... */]);
$promise = $client->assignPrivateIpAddressesAsync([/* ... */]);

Assigns one or more secondary private IP addresses to the specified network interface. You can specify one or more specific secondary IP addresses, or you can specify the number of secondary IP addresses to be automatically assigned within the subnet's CIDR block range. The number of secondary IP addresses that you can assign to an instance varies by instance type. For information about instance types, see Instance Types in the Amazon Elastic Compute Cloud User Guide. For more information about Elastic IP addresses, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide.

AssignPrivateIpAddresses is available only in EC2-VPC.

Parameter Syntax

$result = $client->assignPrivateIpAddresses([
    'AllowReassignment' => true || false,
    'NetworkInterfaceId' => '<string>', // REQUIRED
    'PrivateIpAddresses' => ['<string>', ...],
    'SecondaryPrivateIpAddressCount' => <integer>,
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

AssociateAddress

$result = $client->associateAddress([/* ... */]);
$promise = $client->associateAddressAsync([/* ... */]);

Associates an Elastic IP address with an instance or a network interface.

An Elastic IP address is for use in either the EC2-Classic platform or in a VPC. For more information, see Elastic IP Addresses in the Amazon Elastic Compute Cloud User Guide.

[EC2-Classic, VPC in an EC2-VPC-only account] If the Elastic IP address is already associated with a different instance, it is disassociated from that instance and associated with the specified instance.

[VPC in an EC2-Classic account] If you don't specify a private IP address, the Elastic IP address is associated with the primary IP address. If the Elastic IP address is already associated with a different instance or a network interface, you get an error unless you allow reassociation.

This is an idempotent operation. If you perform the operation more than once, Amazon EC2 doesn't return an error.

Parameter Syntax

$result = $client->associateAddress([
    'AllocationId' => '<string>',
    'AllowReassociation' => true || false,
    'DryRun' => true || false,
    'InstanceId' => '<string>',
    'NetworkInterfaceId' => '<string>',
    'PrivateIpAddress' => '<string>',
    'PublicIp' => '<string>',
]);

Parameter Details

Result Syntax

[
    'AssociationId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

AssociateDhcpOptions

$result = $client->associateDhcpOptions([/* ... */]);
$promise = $client->associateDhcpOptionsAsync([/* ... */]);

Associates a set of DHCP options (that you've previously created) with the specified VPC, or associates no DHCP options with the VPC.

After you associate the options with the VPC, any existing instances and all new instances that you launch in that VPC use the options. You don't need to restart or relaunch the instances. They automatically pick up the changes within a few hours, depending on how frequently the instance renews its DHCP lease. You can explicitly renew the lease using the operating system on the instance.

For more information, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->associateDhcpOptions([
    'DhcpOptionsId' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

AssociateRouteTable

$result = $client->associateRouteTable([/* ... */]);
$promise = $client->associateRouteTableAsync([/* ... */]);

Associates a subnet with a route table. The subnet and route table must be in the same VPC. This association causes traffic originating from the subnet to be routed according to the routes in the route table. The action returns an association ID, which you need in order to disassociate the route table from the subnet later. A route table can be associated with multiple subnets.

For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->associateRouteTable([
    'DryRun' => true || false,
    'RouteTableId' => '<string>', // REQUIRED
    'SubnetId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'AssociationId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

AttachClassicLinkVpc

$result = $client->attachClassicLinkVpc([/* ... */]);
$promise = $client->attachClassicLinkVpcAsync([/* ... */]);

Links an EC2-Classic instance to a ClassicLink-enabled VPC through one or more of the VPC's security groups. You cannot link an EC2-Classic instance to more than one VPC at a time. You can only link an instance that's in the running state. An instance is automatically unlinked from a VPC when it's stopped - you can link it to the VPC again when you restart it.

After you've linked an instance, you cannot change the VPC security groups that are associated with it. To change the security groups, you must first unlink the instance, and then link it again.

Linking your instance to a VPC is sometimes referred to as attaching your instance.

Parameter Syntax

$result = $client->attachClassicLinkVpc([
    'DryRun' => true || false,
    'Groups' => ['<string>', ...], // REQUIRED
    'InstanceId' => '<string>', // REQUIRED
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'Return' => true || false,
]

Result Details

Errors

There are no errors described for this operation.

AttachInternetGateway

$result = $client->attachInternetGateway([/* ... */]);
$promise = $client->attachInternetGatewayAsync([/* ... */]);

Attaches an Internet gateway to a VPC, enabling connectivity between the Internet and the VPC. For more information about your VPC and Internet gateway, see the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->attachInternetGateway([
    'DryRun' => true || false,
    'InternetGatewayId' => '<string>', // REQUIRED
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

AttachNetworkInterface

$result = $client->attachNetworkInterface([/* ... */]);
$promise = $client->attachNetworkInterfaceAsync([/* ... */]);

Attaches a network interface to an instance.

Parameter Syntax

$result = $client->attachNetworkInterface([
    'DeviceIndex' => <integer>, // REQUIRED
    'DryRun' => true || false,
    'InstanceId' => '<string>', // REQUIRED
    'NetworkInterfaceId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'AttachmentId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

AttachVolume

$result = $client->attachVolume([/* ... */]);
$promise = $client->attachVolumeAsync([/* ... */]);

Attaches an EBS volume to a running or stopped instance and exposes it to the instance with the specified device name.

Encrypted EBS volumes may only be attached to instances that support Amazon EBS encryption. For more information, see Amazon EBS Encryption in the Amazon Elastic Compute Cloud User Guide.

For a list of supported device names, see Attaching an EBS Volume to an Instance. Any device names that aren't reserved for instance store volumes can be used for EBS volumes. For more information, see Amazon EC2 Instance Store in the Amazon Elastic Compute Cloud User Guide.

If a volume has an AWS Marketplace product code:

• The volume can be attached only to a stopped instance.

• AWS Marketplace product codes are copied from the volume to the instance.

• You must be subscribed to the product.

• The instance type and operating system of the instance must support the product. For example, you can't detach a volume from a Windows instance and attach it to a Linux instance.

For an overview of the AWS Marketplace, see Introducing AWS Marketplace.

For more information about EBS volumes, see Attaching Amazon EBS Volumes in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->attachVolume([
    'Device' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'InstanceId' => '<string>', // REQUIRED
    'VolumeId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'AttachTime' => <DateTime>,
    'DeleteOnTermination' => true || false,
    'Device' => '<string>',
    'InstanceId' => '<string>',
    'State' => 'attaching|attached|detaching|detached',
    'VolumeId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

AttachVpnGateway

$result = $client->attachVpnGateway([/* ... */]);
$promise = $client->attachVpnGatewayAsync([/* ... */]);

Attaches a virtual private gateway to a VPC. For more information, see Adding a Hardware Virtual Private Gateway to Your VPC in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->attachVpnGateway([
    'DryRun' => true || false,
    'VpcId' => '<string>', // REQUIRED
    'VpnGatewayId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'VpcAttachment' => [
        'State' => 'attaching|attached|detaching|detached',
        'VpcId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

AuthorizeSecurityGroupEgress

$result = $client->authorizeSecurityGroupEgress([/* ... */]);
$promise = $client->authorizeSecurityGroupEgressAsync([/* ... */]);

[EC2-VPC only] Adds one or more egress rules to a security group for use with a VPC. Specifically, this action permits instances to send traffic to one or more destination CIDR IP address ranges, or to one or more destination security groups for the same VPC. This action doesn't apply to security groups for use in EC2-Classic. For more information, see Security Groups for Your VPC in the Amazon Virtual Private Cloud User Guide.

Each rule consists of the protocol (for example, TCP), plus either a CIDR range or a source group. For the TCP and UDP protocols, you must also specify the destination port or port range. For the ICMP protocol, you must also specify the ICMP type and code. You can use -1 for the type or code to mean all types or all codes.

Rule changes are propagated to affected instances as quickly as possible. However, a small delay might occur.

Parameter Syntax

$result = $client->authorizeSecurityGroupEgress([
    'CidrIp' => '<string>',
    'DryRun' => true || false,
    'FromPort' => <integer>,
    'GroupId' => '<string>', // REQUIRED
    'IpPermissions' => [
        [
            'FromPort' => <integer>,
            'IpProtocol' => '<string>',
            'IpRanges' => [
                [
                    'CidrIp' => '<string>',
                ],
                // ...
            ],
            'PrefixListIds' => [
                [
                    'PrefixListId' => '<string>',
                ],
                // ...
            ],
            'ToPort' => <integer>,
            'UserIdGroupPairs' => [
                [
                    'GroupId' => '<string>',
                    'GroupName' => '<string>',
                    'PeeringStatus' => '<string>',
                    'UserId' => '<string>',
                    'VpcId' => '<string>',
                    'VpcPeeringConnectionId' => '<string>',
                ],
                // ...
            ],
        ],
        // ...
    ],
    'IpProtocol' => '<string>',
    'SourceSecurityGroupName' => '<string>',
    'SourceSecurityGroupOwnerId' => '<string>',
    'ToPort' => <integer>,
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

AuthorizeSecurityGroupIngress

$result = $client->authorizeSecurityGroupIngress([/* ... */]);
$promise = $client->authorizeSecurityGroupIngressAsync([/* ... */]);

Adds one or more ingress rules to a security group.

Rule changes are propagated to instances within the security group as quickly as possible. However, a small delay might occur.

[EC2-Classic] This action gives one or more CIDR IP address ranges permission to access a security group in your account, or gives one or more security groups (called the source groups) permission to access a security group for your account. A source group can be for your own AWS account, or another.

[EC2-VPC] This action gives one or more CIDR IP address ranges permission to access a security group in your VPC, or gives one or more other security groups (called the source groups) permission to access a security group for your VPC. The security groups must all be for the same VPC.

Parameter Syntax

$result = $client->authorizeSecurityGroupIngress([
    'CidrIp' => '<string>',
    'DryRun' => true || false,
    'FromPort' => <integer>,
    'GroupId' => '<string>',
    'GroupName' => '<string>',
    'IpPermissions' => [
        [
            'FromPort' => <integer>,
            'IpProtocol' => '<string>',
            'IpRanges' => [
                [
                    'CidrIp' => '<string>',
                ],
                // ...
            ],
            'PrefixListIds' => [
                [
                    'PrefixListId' => '<string>',
                ],
                // ...
            ],
            'ToPort' => <integer>,
            'UserIdGroupPairs' => [
                [
                    'GroupId' => '<string>',
                    'GroupName' => '<string>',
                    'PeeringStatus' => '<string>',
                    'UserId' => '<string>',
                    'VpcId' => '<string>',
                    'VpcPeeringConnectionId' => '<string>',
                ],
                // ...
            ],
        ],
        // ...
    ],
    'IpProtocol' => '<string>',
    'SourceSecurityGroupName' => '<string>',
    'SourceSecurityGroupOwnerId' => '<string>',
    'ToPort' => <integer>,
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

BundleInstance

$result = $client->bundleInstance([/* ... */]);
$promise = $client->bundleInstanceAsync([/* ... */]);

Bundles an Amazon instance store-backed Windows instance.

During bundling, only the root device volume (C:\) is bundled. Data on other instance store volumes is not preserved.

For more information, see Creating an Instance Store-Backed Windows AMI.

Parameter Syntax

$result = $client->bundleInstance([
    'DryRun' => true || false,
    'InstanceId' => '<string>', // REQUIRED
    'Storage' => [ // REQUIRED
        'S3' => [
            'AWSAccessKeyId' => '<string>',
            'Bucket' => '<string>',
            'Prefix' => '<string>',
            'UploadPolicy' => <string || resource || Psr\Http\Message\StreamInterface>,
            'UploadPolicySignature' => '<string>',
        ],
    ],
]);

Parameter Details

Result Syntax

[
    'BundleTask' => [
        'BundleId' => '<string>',
        'BundleTaskError' => [
            'Code' => '<string>',
            'Message' => '<string>',
        ],
        'InstanceId' => '<string>',
        'Progress' => '<string>',
        'StartTime' => <DateTime>,
        'State' => 'pending|waiting-for-shutdown|bundling|storing|cancelling|complete|failed',
        'Storage' => [
            'S3' => [
                'AWSAccessKeyId' => '<string>',
                'Bucket' => '<string>',
                'Prefix' => '<string>',
                'UploadPolicy' => <string || resource || Psr\Http\Message\StreamInterface>,
                'UploadPolicySignature' => '<string>',
            ],
        ],
        'UpdateTime' => <DateTime>,
    ],
]

Result Details

Errors

There are no errors described for this operation.

CancelBundleTask

$result = $client->cancelBundleTask([/* ... */]);
$promise = $client->cancelBundleTaskAsync([/* ... */]);

Cancels a bundling operation for an instance store-backed Windows instance.

Parameter Syntax

$result = $client->cancelBundleTask([
    'BundleId' => '<string>', // REQUIRED
    'DryRun' => true || false,
]);

Parameter Details

Result Syntax

[
    'BundleTask' => [
        'BundleId' => '<string>',
        'BundleTaskError' => [
            'Code' => '<string>',
            'Message' => '<string>',
        ],
        'InstanceId' => '<string>',
        'Progress' => '<string>',
        'StartTime' => <DateTime>,
        'State' => 'pending|waiting-for-shutdown|bundling|storing|cancelling|complete|failed',
        'Storage' => [
            'S3' => [
                'AWSAccessKeyId' => '<string>',
                'Bucket' => '<string>',
                'Prefix' => '<string>',
                'UploadPolicy' => <string || resource || Psr\Http\Message\StreamInterface>,
                'UploadPolicySignature' => '<string>',
            ],
        ],
        'UpdateTime' => <DateTime>,
    ],
]

Result Details

Errors

There are no errors described for this operation.

CancelConversionTask

$result = $client->cancelConversionTask([/* ... */]);
$promise = $client->cancelConversionTaskAsync([/* ... */]);

Cancels an active conversion task. The task can be the import of an instance or volume. The action removes all artifacts of the conversion, including a partially uploaded volume or instance. If the conversion is complete or is in the process of transferring the final disk image, the command fails and returns an exception.

For more information, see Using the Command Line Tools to Import Your Virtual Machine to Amazon EC2 in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->cancelConversionTask([
    'ConversionTaskId' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'ReasonMessage' => '<string>',
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

CancelExportTask

$result = $client->cancelExportTask([/* ... */]);
$promise = $client->cancelExportTaskAsync([/* ... */]);

Cancels an active export task. The request removes all artifacts of the export, including any partially-created Amazon S3 objects. If the export task is complete or is in the process of transferring the final disk image, the command fails and returns an error.

Parameter Syntax

$result = $client->cancelExportTask([
    'ExportTaskId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

CancelImportTask

$result = $client->cancelImportTask([/* ... */]);
$promise = $client->cancelImportTaskAsync([/* ... */]);

Cancels an in-process import virtual machine or import snapshot task.

Parameter Syntax

$result = $client->cancelImportTask([
    'CancelReason' => '<string>',
    'DryRun' => true || false,
    'ImportTaskId' => '<string>',
]);

Parameter Details

Result Syntax

[
    'ImportTaskId' => '<string>',
    'PreviousState' => '<string>',
    'State' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

CancelReservedInstancesListing

$result = $client->cancelReservedInstancesListing([/* ... */]);
$promise = $client->cancelReservedInstancesListingAsync([/* ... */]);

Cancels the specified Reserved Instance listing in the Reserved Instance Marketplace.

For more information, see Reserved Instance Marketplace in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->cancelReservedInstancesListing([
    'ReservedInstancesListingId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'ReservedInstancesListings' => [
        [
            'ClientToken' => '<string>',
            'CreateDate' => <DateTime>,
            'InstanceCounts' => [
                [
                    'InstanceCount' => <integer>,
                    'State' => 'available|sold|cancelled|pending',
                ],
                // ...
            ],
            'PriceSchedules' => [
                [
                    'Active' => true || false,
                    'CurrencyCode' => 'USD',
                    'Price' => <float>,
                    'Term' => <integer>,
                ],
                // ...
            ],
            'ReservedInstancesId' => '<string>',
            'ReservedInstancesListingId' => '<string>',
            'Status' => 'active|pending|cancelled|closed',
            'StatusMessage' => '<string>',
            'Tags' => [
                [
                    'Key' => '<string>',
                    'Value' => '<string>',
                ],
                // ...
            ],
            'UpdateDate' => <DateTime>,
        ],
        // ...
    ],
]

Result Details

Errors

There are no errors described for this operation.

CancelSpotFleetRequests

$result = $client->cancelSpotFleetRequests([/* ... */]);
$promise = $client->cancelSpotFleetRequestsAsync([/* ... */]);

Cancels the specified Spot fleet requests.

After you cancel a Spot fleet request, the Spot fleet launches no new Spot instances. You must specify whether the Spot fleet should also terminate its Spot instances. If you terminate the instances, the Spot fleet request enters the cancelled_terminating state. Otherwise, the Spot fleet request enters the cancelled_running state and the instances continue to run until they are interrupted or you terminate them manually.

Parameter Syntax

$result = $client->cancelSpotFleetRequests([
    'DryRun' => true || false,
    'SpotFleetRequestIds' => ['<string>', ...], // REQUIRED
    'TerminateInstances' => true || false, // REQUIRED
]);

Parameter Details

Result Syntax

[
    'SuccessfulFleetRequests' => [
        [
            'CurrentSpotFleetRequestState' => 'submitted|active|cancelled|failed|cancelled_running|cancelled_terminating|modifying',
            'PreviousSpotFleetRequestState' => 'submitted|active|cancelled|failed|cancelled_running|cancelled_terminating|modifying',
            'SpotFleetRequestId' => '<string>',
        ],
        // ...
    ],
    'UnsuccessfulFleetRequests' => [
        [
            'Error' => [
                'Code' => 'fleetRequestIdDoesNotExist|fleetRequestIdMalformed|fleetRequestNotInCancellableState|unexpectedError',
                'Message' => '<string>',
            ],
            'SpotFleetRequestId' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

There are no errors described for this operation.

CancelSpotInstanceRequests

$result = $client->cancelSpotInstanceRequests([/* ... */]);
$promise = $client->cancelSpotInstanceRequestsAsync([/* ... */]);

Cancels one or more Spot instance requests. Spot instances are instances that Amazon EC2 starts on your behalf when the bid price that you specify exceeds the current Spot price. Amazon EC2 periodically sets the Spot price based on available Spot instance capacity and current Spot instance requests. For more information, see Spot Instance Requests in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->cancelSpotInstanceRequests([
    'DryRun' => true || false,
    'SpotInstanceRequestIds' => ['<string>', ...], // REQUIRED
]);

Parameter Details

Result Syntax

[
    'CancelledSpotInstanceRequests' => [
        [
            'SpotInstanceRequestId' => '<string>',
            'State' => 'active|open|closed|cancelled|completed',
        ],
        // ...
    ],
]

Result Details

Errors

There are no errors described for this operation.

ConfirmProductInstance

$result = $client->confirmProductInstance([/* ... */]);
$promise = $client->confirmProductInstanceAsync([/* ... */]);

Determines whether a product code is associated with an instance. This action can only be used by the owner of the product code. It is useful when a product code owner needs to verify whether another user's instance is eligible for support.

Parameter Syntax

$result = $client->confirmProductInstance([
    'DryRun' => true || false,
    'InstanceId' => '<string>', // REQUIRED
    'ProductCode' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'OwnerId' => '<string>',
    'Return' => true || false,
]

Result Details

Errors

There are no errors described for this operation.

CopyImage

$result = $client->copyImage([/* ... */]);
$promise = $client->copyImageAsync([/* ... */]);

Initiates the copy of an AMI from the specified source region to the current region. You specify the destination region by using its endpoint when making the request.

For more information, see Copying AMIs in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->copyImage([
    'ClientToken' => '<string>',
    'Description' => '<string>',
    'DryRun' => true || false,
    'Encrypted' => true || false,
    'KmsKeyId' => '<string>',
    'Name' => '<string>', // REQUIRED
    'SourceImageId' => '<string>', // REQUIRED
    'SourceRegion' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'ImageId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

CopySnapshot

$result = $client->copySnapshot([/* ... */]);
$promise = $client->copySnapshotAsync([/* ... */]);

Copies a point-in-time snapshot of an EBS volume and stores it in Amazon S3. You can copy the snapshot within the same region or from one region to another. You can use the snapshot to create EBS volumes or Amazon Machine Images (AMIs). The snapshot is copied to the regional endpoint that you send the HTTP request to.

Copies of encrypted EBS snapshots remain encrypted. Copies of unencrypted snapshots remain unencrypted, unless the Encrypted flag is specified during the snapshot copy operation. By default, encrypted snapshot copies use the default AWS Key Management Service (AWS KMS) customer master key (CMK); however, you can specify a non-default CMK with the KmsKeyId parameter.

For more information, see Copying an Amazon EBS Snapshot in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->copySnapshot([
    'Description' => '<string>',
    'DestinationRegion' => '<string>',
    'DryRun' => true || false,
    'Encrypted' => true || false,
    'KmsKeyId' => '<string>',
    'PresignedUrl' => '<string>',
    'SourceRegion' => '<string>', // REQUIRED
    'SourceSnapshotId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'SnapshotId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

CreateCustomerGateway

$result = $client->createCustomerGateway([/* ... */]);
$promise = $client->createCustomerGatewayAsync([/* ... */]);

Provides information to AWS about your VPN customer gateway device. The customer gateway is the appliance at your end of the VPN connection. (The device on the AWS side of the VPN connection is the virtual private gateway.) You must provide the Internet-routable IP address of the customer gateway's external interface. The IP address must be static and may be behind a device performing network address translation (NAT).

For devices that use Border Gateway Protocol (BGP), you can also provide the device's BGP Autonomous System Number (ASN). You can use an existing ASN assigned to your network. If you don't have an ASN already, you can use a private ASN (in the 64512 - 65534 range).

For more information about VPN customer gateways, see Adding a Hardware Virtual Private Gateway to Your VPC in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->createCustomerGateway([
    'BgpAsn' => <integer>, // REQUIRED
    'DryRun' => true || false,
    'PublicIp' => '<string>', // REQUIRED
    'Type' => 'ipsec.1', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'CustomerGateway' => [
        'BgpAsn' => '<string>',
        'CustomerGatewayId' => '<string>',
        'IpAddress' => '<string>',
        'State' => '<string>',
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'Type' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateDhcpOptions

$result = $client->createDhcpOptions([/* ... */]);
$promise = $client->createDhcpOptionsAsync([/* ... */]);

Creates a set of DHCP options for your VPC. After creating the set, you must associate it with the VPC, causing all existing and new instances that you launch in the VPC to use this set of DHCP options. The following are the individual DHCP options you can specify. For more information about the options, see RFC 2132.

• domain-name-servers - The IP addresses of up to four domain name servers, or AmazonProvidedDNS. The default DHCP option set specifies AmazonProvidedDNS. If specifying more than one domain name server, specify the IP addresses in a single parameter, separated by commas.

• domain-name - If you're using AmazonProvidedDNS in "us-east-1", specify "ec2.internal". If you're using AmazonProvidedDNS in another region, specify "region.compute.internal" (for example, "ap-northeast-1.compute.internal"). Otherwise, specify a domain name (for example, "MyCompany.com"). Important: Some Linux operating systems accept multiple domain names separated by spaces. However, Windows and other Linux operating systems treat the value as a single domain, which results in unexpected behavior. If your DHCP options set is associated with a VPC that has instances with multiple operating systems, specify only one domain name.

• ntp-servers - The IP addresses of up to four Network Time Protocol (NTP) servers.

• netbios-name-servers - The IP addresses of up to four NetBIOS name servers.

• netbios-node-type - The NetBIOS node type (1, 2, 4, or 8). We recommend that you specify 2 (broadcast and multicast are not currently supported). For more information about these node types, see RFC 2132.

Your VPC automatically starts out with a set of DHCP options that includes only a DNS server that we provide (AmazonProvidedDNS). If you create a set of options, and if your VPC has an Internet gateway, make sure to set the domain-name-servers option either to AmazonProvidedDNS or to a domain name server of your choice. For more information about DHCP options, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->createDhcpOptions([
    'DhcpConfigurations' => [ // REQUIRED
        [
            'Key' => '<string>',
            'Values' => ['<string>', ...],
        ],
        // ...
    ],
    'DryRun' => true || false,
]);

Parameter Details

Result Syntax

[
    'DhcpOptions' => [
        'DhcpConfigurations' => [
            [
                'Key' => '<string>',
                'Values' => [
                    [
                        'Value' => '<string>',
                    ],
                    // ...
                ],
            ],
            // ...
        ],
        'DhcpOptionsId' => '<string>',
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateFlowLogs

$result = $client->createFlowLogs([/* ... */]);
$promise = $client->createFlowLogsAsync([/* ... */]);

Creates one or more flow logs to capture IP traffic for a specific network interface, subnet, or VPC. Flow logs are delivered to a specified log group in Amazon CloudWatch Logs. If you specify a VPC or subnet in the request, a log stream is created in CloudWatch Logs for each network interface in the subnet or VPC. Log streams can include information about accepted and rejected traffic to a network interface. You can view the data in your log streams using Amazon CloudWatch Logs.

In your request, you must also specify an IAM role that has permission to publish logs to CloudWatch Logs.

Parameter Syntax

$result = $client->createFlowLogs([
    'ClientToken' => '<string>',
    'DeliverLogsPermissionArn' => '<string>', // REQUIRED
    'LogGroupName' => '<string>', // REQUIRED
    'ResourceIds' => ['<string>', ...], // REQUIRED
    'ResourceType' => 'VPC|Subnet|NetworkInterface', // REQUIRED
    'TrafficType' => 'ACCEPT|REJECT|ALL', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'ClientToken' => '<string>',
    'FlowLogIds' => ['<string>', ...],
    'Unsuccessful' => [
        [
            'Error' => [
                'Code' => '<string>',
                'Message' => '<string>',
            ],
            'ResourceId' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateImage

$result = $client->createImage([/* ... */]);
$promise = $client->createImageAsync([/* ... */]);

Creates an Amazon EBS-backed AMI from an Amazon EBS-backed instance that is either running or stopped.

If you customized your instance with instance store volumes or EBS volumes in addition to the root device volume, the new AMI contains block device mapping information for those volumes. When you launch an instance from this new AMI, the instance automatically launches with those additional volumes.

For more information, see Creating Amazon EBS-Backed Linux AMIs in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->createImage([
    'BlockDeviceMappings' => [
        [
            'DeviceName' => '<string>',
            'Ebs' => [
                'DeleteOnTermination' => true || false,
                'Encrypted' => true || false,
                'Iops' => <integer>,
                'SnapshotId' => '<string>',
                'VolumeSize' => <integer>,
                'VolumeType' => 'standard|io1|gp2|sc1|st1',
            ],
            'NoDevice' => '<string>',
            'VirtualName' => '<string>',
        ],
        // ...
    ],
    'Description' => '<string>',
    'DryRun' => true || false,
    'InstanceId' => '<string>', // REQUIRED
    'Name' => '<string>', // REQUIRED
    'NoReboot' => true || false,
]);

Parameter Details

Result Syntax

[
    'ImageId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

CreateInstanceExportTask

$result = $client->createInstanceExportTask([/* ... */]);
$promise = $client->createInstanceExportTaskAsync([/* ... */]);

Exports a running or stopped instance to an S3 bucket.

For information about the supported operating systems, image formats, and known limitations for the types of instances you can export, see Exporting EC2 Instances in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->createInstanceExportTask([
    'Description' => '<string>',
    'ExportToS3Task' => [
        'ContainerFormat' => 'ova',
        'DiskImageFormat' => 'VMDK|RAW|VHD',
        'S3Bucket' => '<string>',
        'S3Prefix' => '<string>',
    ],
    'InstanceId' => '<string>', // REQUIRED
    'TargetEnvironment' => 'citrix|vmware|microsoft',
]);

Parameter Details

Result Syntax

[
    'ExportTask' => [
        'Description' => '<string>',
        'ExportTaskId' => '<string>',
        'ExportToS3Task' => [
            'ContainerFormat' => 'ova',
            'DiskImageFormat' => 'VMDK|RAW|VHD',
            'S3Bucket' => '<string>',
            'S3Key' => '<string>',
        ],
        'InstanceExportDetails' => [
            'InstanceId' => '<string>',
            'TargetEnvironment' => 'citrix|vmware|microsoft',
        ],
        'State' => 'active|cancelling|cancelled|completed',
        'StatusMessage' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateInternetGateway

$result = $client->createInternetGateway([/* ... */]);
$promise = $client->createInternetGatewayAsync([/* ... */]);

Creates an Internet gateway for use with a VPC. After creating the Internet gateway, you attach it to a VPC using AttachInternetGateway.

For more information about your VPC and Internet gateway, see the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->createInternetGateway([
    'DryRun' => true || false,
]);

Parameter Details

Result Syntax

[
    'InternetGateway' => [
        'Attachments' => [
            [
                'State' => 'attaching|attached|detaching|detached',
                'VpcId' => '<string>',
            ],
            // ...
        ],
        'InternetGatewayId' => '<string>',
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateKeyPair

$result = $client->createKeyPair([/* ... */]);
$promise = $client->createKeyPairAsync([/* ... */]);

Creates a 2048-bit RSA key pair with the specified name. Amazon EC2 stores the public key and displays the private key for you to save to a file. The private key is returned as an unencrypted PEM encoded PKCS#8 private key. If a key with the specified name already exists, Amazon EC2 returns an error.

You can have up to five thousand key pairs per region.

The key pair returned to you is available only in the region in which you create it. To create a key pair that is available in all regions, use ImportKeyPair.

For more information about key pairs, see Key Pairs in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->createKeyPair([
    'DryRun' => true || false,
    'KeyName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'KeyFingerprint' => '<string>',
    'KeyMaterial' => '<string>',
    'KeyName' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

CreateNatGateway

$result = $client->createNatGateway([/* ... */]);
$promise = $client->createNatGatewayAsync([/* ... */]);

Creates a NAT gateway in the specified subnet. A NAT gateway can be used to enable instances in a private subnet to connect to the Internet. This action creates a network interface in the specified subnet with a private IP address from the IP address range of the subnet. For more information, see NAT Gateways in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->createNatGateway([
    'AllocationId' => '<string>', // REQUIRED
    'ClientToken' => '<string>',
    'SubnetId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'ClientToken' => '<string>',
    'NatGateway' => [
        'CreateTime' => <DateTime>,
        'DeleteTime' => <DateTime>,
        'FailureCode' => '<string>',
        'FailureMessage' => '<string>',
        'NatGatewayAddresses' => [
            [
                'AllocationId' => '<string>',
                'NetworkInterfaceId' => '<string>',
                'PrivateIp' => '<string>',
                'PublicIp' => '<string>',
            ],
            // ...
        ],
        'NatGatewayId' => '<string>',
        'ProvisionedBandwidth' => [
            'ProvisionTime' => <DateTime>,
            'Provisioned' => '<string>',
            'RequestTime' => <DateTime>,
            'Requested' => '<string>',
            'Status' => '<string>',
        ],
        'State' => 'pending|failed|available|deleting|deleted',
        'SubnetId' => '<string>',
        'VpcId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateNetworkAcl

$result = $client->createNetworkAcl([/* ... */]);
$promise = $client->createNetworkAclAsync([/* ... */]);

Creates a network ACL in a VPC. Network ACLs provide an optional layer of security (in addition to security groups) for the instances in your VPC.

For more information about network ACLs, see Network ACLs in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->createNetworkAcl([
    'DryRun' => true || false,
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'NetworkAcl' => [
        'Associations' => [
            [
                'NetworkAclAssociationId' => '<string>',
                'NetworkAclId' => '<string>',
                'SubnetId' => '<string>',
            ],
            // ...
        ],
        'Entries' => [
            [
                'CidrBlock' => '<string>',
                'Egress' => true || false,
                'IcmpTypeCode' => [
                    'Code' => <integer>,
                    'Type' => <integer>,
                ],
                'PortRange' => [
                    'From' => <integer>,
                    'To' => <integer>,
                ],
                'Protocol' => '<string>',
                'RuleAction' => 'allow|deny',
                'RuleNumber' => <integer>,
            ],
            // ...
        ],
        'IsDefault' => true || false,
        'NetworkAclId' => '<string>',
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'VpcId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateNetworkAclEntry

$result = $client->createNetworkAclEntry([/* ... */]);
$promise = $client->createNetworkAclEntryAsync([/* ... */]);

Creates an entry (a rule) in a network ACL with the specified rule number. Each network ACL has a set of numbered ingress rules and a separate set of numbered egress rules. When determining whether a packet should be allowed in or out of a subnet associated with the ACL, we process the entries in the ACL according to the rule numbers, in ascending order. Each network ACL has a set of ingress rules and a separate set of egress rules.

We recommend that you leave room between the rule numbers (for example, 100, 110, 120, ...), and not number them one right after the other (for example, 101, 102, 103, ...). This makes it easier to add a rule between existing ones without having to renumber the rules.

After you add an entry, you can't modify it; you must either replace it, or create an entry and delete the old one.

For more information about network ACLs, see Network ACLs in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->createNetworkAclEntry([
    'CidrBlock' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'Egress' => true || false, // REQUIRED
    'IcmpTypeCode' => [
        'Code' => <integer>,
        'Type' => <integer>,
    ],
    'NetworkAclId' => '<string>', // REQUIRED
    'PortRange' => [
        'From' => <integer>,
        'To' => <integer>,
    ],
    'Protocol' => '<string>', // REQUIRED
    'RuleAction' => 'allow|deny', // REQUIRED
    'RuleNumber' => <integer>, // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

CreateNetworkInterface

$result = $client->createNetworkInterface([/* ... */]);
$promise = $client->createNetworkInterfaceAsync([/* ... */]);

Creates a network interface in the specified subnet.

For more information about network interfaces, see Elastic Network Interfaces in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->createNetworkInterface([
    'Description' => '<string>',
    'DryRun' => true || false,
    'Groups' => ['<string>', ...],
    'PrivateIpAddress' => '<string>',
    'PrivateIpAddresses' => [
        [
            'Primary' => true || false,
            'PrivateIpAddress' => '<string>', // REQUIRED
        ],
        // ...
    ],
    'SecondaryPrivateIpAddressCount' => <integer>,
    'SubnetId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'NetworkInterface' => [
        'Association' => [
            'AllocationId' => '<string>',
            'AssociationId' => '<string>',
            'IpOwnerId' => '<string>',
            'PublicDnsName' => '<string>',
            'PublicIp' => '<string>',
        ],
        'Attachment' => [
            'AttachTime' => <DateTime>,
            'AttachmentId' => '<string>',
            'DeleteOnTermination' => true || false,
            'DeviceIndex' => <integer>,
            'InstanceId' => '<string>',
            'InstanceOwnerId' => '<string>',
            'Status' => 'attaching|attached|detaching|detached',
        ],
        'AvailabilityZone' => '<string>',
        'Description' => '<string>',
        'Groups' => [
            [
                'GroupId' => '<string>',
                'GroupName' => '<string>',
            ],
            // ...
        ],
        'InterfaceType' => 'interface|natGateway',
        'MacAddress' => '<string>',
        'NetworkInterfaceId' => '<string>',
        'OwnerId' => '<string>',
        'PrivateDnsName' => '<string>',
        'PrivateIpAddress' => '<string>',
        'PrivateIpAddresses' => [
            [
                'Association' => [
                    'AllocationId' => '<string>',
                    'AssociationId' => '<string>',
                    'IpOwnerId' => '<string>',
                    'PublicDnsName' => '<string>',
                    'PublicIp' => '<string>',
                ],
                'Primary' => true || false,
                'PrivateDnsName' => '<string>',
                'PrivateIpAddress' => '<string>',
            ],
            // ...
        ],
        'RequesterId' => '<string>',
        'RequesterManaged' => true || false,
        'SourceDestCheck' => true || false,
        'Status' => 'available|attaching|in-use|detaching',
        'SubnetId' => '<string>',
        'TagSet' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'VpcId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreatePlacementGroup

$result = $client->createPlacementGroup([/* ... */]);
$promise = $client->createPlacementGroupAsync([/* ... */]);

Creates a placement group that you launch cluster instances into. You must give the group a name that's unique within the scope of your account.

For more information about placement groups and cluster instances, see Cluster Instances in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->createPlacementGroup([
    'DryRun' => true || false,
    'GroupName' => '<string>', // REQUIRED
    'Strategy' => 'cluster', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

CreateReservedInstancesListing

$result = $client->createReservedInstancesListing([/* ... */]);
$promise = $client->createReservedInstancesListingAsync([/* ... */]);

Creates a listing for Amazon EC2 Reserved Instances to be sold in the Reserved Instance Marketplace. You can submit one Reserved Instance listing at a time. To get a list of your Reserved Instances, you can use the DescribeReservedInstances operation.

The Reserved Instance Marketplace matches sellers who want to resell Reserved Instance capacity that they no longer need with buyers who want to purchase additional capacity. Reserved Instances bought and sold through the Reserved Instance Marketplace work like any other Reserved Instances.

To sell your Reserved Instances, you must first register as a seller in the Reserved Instance Marketplace. After completing the registration process, you can create a Reserved Instance Marketplace listing of some or all of your Reserved Instances, and specify the upfront price to receive for them. Your Reserved Instance listings then become available for purchase. To view the details of your Reserved Instance listing, you can use the DescribeReservedInstancesListings operation.

For more information, see Reserved Instance Marketplace in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->createReservedInstancesListing([
    'ClientToken' => '<string>', // REQUIRED
    'InstanceCount' => <integer>, // REQUIRED
    'PriceSchedules' => [ // REQUIRED
        [
            'CurrencyCode' => 'USD',
            'Price' => <float>,
            'Term' => <integer>,
        ],
        // ...
    ],
    'ReservedInstancesId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'ReservedInstancesListings' => [
        [
            'ClientToken' => '<string>',
            'CreateDate' => <DateTime>,
            'InstanceCounts' => [
                [
                    'InstanceCount' => <integer>,
                    'State' => 'available|sold|cancelled|pending',
                ],
                // ...
            ],
            'PriceSchedules' => [
                [
                    'Active' => true || false,
                    'CurrencyCode' => 'USD',
                    'Price' => <float>,
                    'Term' => <integer>,
                ],
                // ...
            ],
            'ReservedInstancesId' => '<string>',
            'ReservedInstancesListingId' => '<string>',
            'Status' => 'active|pending|cancelled|closed',
            'StatusMessage' => '<string>',
            'Tags' => [
                [
                    'Key' => '<string>',
                    'Value' => '<string>',
                ],
                // ...
            ],
            'UpdateDate' => <DateTime>,
        ],
        // ...
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateRoute

$result = $client->createRoute([/* ... */]);
$promise = $client->createRouteAsync([/* ... */]);

Creates a route in a route table within a VPC.

You must specify one of the following targets: Internet gateway or virtual private gateway, NAT instance, NAT gateway, VPC peering connection, or network interface.

When determining how to route traffic, we use the route with the most specific match. For example, let's say the traffic is destined for 192.0.2.3, and the route table includes the following two routes:

• 192.0.2.0/24 (goes to some target A)

• 192.0.2.0/28 (goes to some target B)

Both routes apply to the traffic destined for 192.0.2.3. However, the second route in the list covers a smaller number of IP addresses and is therefore more specific, so we use that route to determine where to target the traffic.

For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->createRoute([
    'DestinationCidrBlock' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'GatewayId' => '<string>',
    'InstanceId' => '<string>',
    'NatGatewayId' => '<string>',
    'NetworkInterfaceId' => '<string>',
    'RouteTableId' => '<string>', // REQUIRED
    'VpcPeeringConnectionId' => '<string>',
]);

Parameter Details

Result Syntax

[
    'Return' => true || false,
]

Result Details

Errors

There are no errors described for this operation.

CreateRouteTable

$result = $client->createRouteTable([/* ... */]);
$promise = $client->createRouteTableAsync([/* ... */]);

Creates a route table for the specified VPC. After you create a route table, you can add routes and associate the table with a subnet.

For more information about route tables, see Route Tables in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->createRouteTable([
    'DryRun' => true || false,
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'RouteTable' => [
        'Associations' => [
            [
                'Main' => true || false,
                'RouteTableAssociationId' => '<string>',
                'RouteTableId' => '<string>',
                'SubnetId' => '<string>',
            ],
            // ...
        ],
        'PropagatingVgws' => [
            [
                'GatewayId' => '<string>',
            ],
            // ...
        ],
        'RouteTableId' => '<string>',
        'Routes' => [
            [
                'DestinationCidrBlock' => '<string>',
                'DestinationPrefixListId' => '<string>',
                'GatewayId' => '<string>',
                'InstanceId' => '<string>',
                'InstanceOwnerId' => '<string>',
                'NatGatewayId' => '<string>',
                'NetworkInterfaceId' => '<string>',
                'Origin' => 'CreateRouteTable|CreateRoute|EnableVgwRoutePropagation',
                'State' => 'active|blackhole',
                'VpcPeeringConnectionId' => '<string>',
            ],
            // ...
        ],
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'VpcId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateSecurityGroup

$result = $client->createSecurityGroup([/* ... */]);
$promise = $client->createSecurityGroupAsync([/* ... */]);

Creates a security group.

A security group is for use with instances either in the EC2-Classic platform or in a specific VPC. For more information, see Amazon EC2 Security Groups in the Amazon Elastic Compute Cloud User Guide and Security Groups for Your VPC in the Amazon Virtual Private Cloud User Guide.

When you create a security group, you specify a friendly name of your choice. You can have a security group for use in EC2-Classic with the same name as a security group for use in a VPC. However, you can't have two security groups for use in EC2-Classic with the same name or two security groups for use in a VPC with the same name.

You have a default security group for use in EC2-Classic and a default security group for use in your VPC. If you don't specify a security group when you launch an instance, the instance is launched into the appropriate default security group. A default security group includes a default rule that grants instances unrestricted network access to each other.

You can add or remove rules from your security groups using AuthorizeSecurityGroupIngress, AuthorizeSecurityGroupEgress, RevokeSecurityGroupIngress, and RevokeSecurityGroupEgress.

Parameter Syntax

$result = $client->createSecurityGroup([
    'Description' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'GroupName' => '<string>', // REQUIRED
    'VpcId' => '<string>',
]);

Parameter Details

Result Syntax

[
    'GroupId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

CreateSnapshot

$result = $client->createSnapshot([/* ... */]);
$promise = $client->createSnapshotAsync([/* ... */]);

Creates a snapshot of an EBS volume and stores it in Amazon S3. You can use snapshots for backups, to make copies of EBS volumes, and to save data before shutting down an instance.

When a snapshot is created, any AWS Marketplace product codes that are associated with the source volume are propagated to the snapshot.

You can take a snapshot of an attached volume that is in use. However, snapshots only capture data that has been written to your EBS volume at the time the snapshot command is issued; this may exclude any data that has been cached by any applications or the operating system. If you can pause any file systems on the volume long enough to take a snapshot, your snapshot should be complete. However, if you cannot pause all file writes to the volume, you should unmount the volume from within the instance, issue the snapshot command, and then remount the volume to ensure a consistent and complete snapshot. You may remount and use your volume while the snapshot status is pending.

To create a snapshot for EBS volumes that serve as root devices, you should stop the instance before taking the snapshot.

Snapshots that are taken from encrypted volumes are automatically encrypted. Volumes that are created from encrypted snapshots are also automatically encrypted. Your encrypted volumes and any associated snapshots always remain protected.

For more information, see Amazon Elastic Block Store and Amazon EBS Encryption in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->createSnapshot([
    'Description' => '<string>',
    'DryRun' => true || false,
    'VolumeId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'DataEncryptionKeyId' => '<string>',
    'Description' => '<string>',
    'Encrypted' => true || false,
    'KmsKeyId' => '<string>',
    'OwnerAlias' => '<string>',
    'OwnerId' => '<string>',
    'Progress' => '<string>',
    'SnapshotId' => '<string>',
    'StartTime' => <DateTime>,
    'State' => 'pending|completed|error',
    'StateMessage' => '<string>',
    'Tags' => [
        [
            'Key' => '<string>',
            'Value' => '<string>',
        ],
        // ...
    ],
    'VolumeId' => '<string>',
    'VolumeSize' => <integer>,
]

Result Details

Errors

There are no errors described for this operation.

CreateSpotDatafeedSubscription

$result = $client->createSpotDatafeedSubscription([/* ... */]);
$promise = $client->createSpotDatafeedSubscriptionAsync([/* ... */]);

Creates a data feed for Spot instances, enabling you to view Spot instance usage logs. You can create one data feed per AWS account. For more information, see Spot Instance Data Feed in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->createSpotDatafeedSubscription([
    'Bucket' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'Prefix' => '<string>',
]);

Parameter Details

Result Syntax

[
    'SpotDatafeedSubscription' => [
        'Bucket' => '<string>',
        'Fault' => [
            'Code' => '<string>',
            'Message' => '<string>',
        ],
        'OwnerId' => '<string>',
        'Prefix' => '<string>',
        'State' => 'Active|Inactive',
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateSubnet

$result = $client->createSubnet([/* ... */]);
$promise = $client->createSubnetAsync([/* ... */]);

Creates a subnet in an existing VPC.

When you create each subnet, you provide the VPC ID and the CIDR block you want for the subnet. After you create a subnet, you can't change its CIDR block. The subnet's CIDR block can be the same as the VPC's CIDR block (assuming you want only a single subnet in the VPC), or a subset of the VPC's CIDR block. If you create more than one subnet in a VPC, the subnets' CIDR blocks must not overlap. The smallest subnet (and VPC) you can create uses a /28 netmask (16 IP addresses), and the largest uses a /16 netmask (65,536 IP addresses).

If you add more than one subnet to a VPC, they're set up in a star topology with a logical router in the middle.

If you launch an instance in a VPC using an Amazon EBS-backed AMI, the IP address doesn't change if you stop and restart the instance (unlike a similar instance launched outside a VPC, which gets a new IP address when restarted). It's therefore possible to have a subnet with no running instances (they're all stopped), but no remaining IP addresses available.

For more information about subnets, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->createSubnet([
    'AvailabilityZone' => '<string>',
    'CidrBlock' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'Subnet' => [
        'AvailabilityZone' => '<string>',
        'AvailableIpAddressCount' => <integer>,
        'CidrBlock' => '<string>',
        'DefaultForAz' => true || false,
        'MapPublicIpOnLaunch' => true || false,
        'State' => 'pending|available',
        'SubnetId' => '<string>',
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'VpcId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateTags

$result = $client->createTags([/* ... */]);
$promise = $client->createTagsAsync([/* ... */]);

Adds or overwrites one or more tags for the specified Amazon EC2 resource or resources. Each resource can have a maximum of 10 tags. Each tag consists of a key and optional value. Tag keys must be unique per resource.

For more information about tags, see Tagging Your Resources in the Amazon Elastic Compute Cloud User Guide. For more information about creating IAM policies that control users' access to resources based on tags, see Supported Resource-Level Permissions for Amazon EC2 API Actions in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->createTags([
    'DryRun' => true || false,
    'Resources' => ['<string>', ...], // REQUIRED
    'Tags' => [ // REQUIRED
        [
            'Key' => '<string>',
            'Value' => '<string>',
        ],
        // ...
    ],
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

CreateVolume

$result = $client->createVolume([/* ... */]);
$promise = $client->createVolumeAsync([/* ... */]);

Creates an EBS volume that can be attached to an instance in the same Availability Zone. The volume is created in the regional endpoint that you send the HTTP request to. For more information see Regions and Endpoints.

You can create a new empty volume or restore a volume from an EBS snapshot. Any AWS Marketplace product codes from the snapshot are propagated to the volume.

You can create encrypted volumes with the Encrypted parameter. Encrypted volumes may only be attached to instances that support Amazon EBS encryption. Volumes that are created from encrypted snapshots are also automatically encrypted. For more information, see Amazon EBS Encryption in the Amazon Elastic Compute Cloud User Guide.

For more information, see Creating or Restoring an Amazon EBS Volume in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->createVolume([
    'AvailabilityZone' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'Encrypted' => true || false,
    'Iops' => <integer>,
    'KmsKeyId' => '<string>',
    'Size' => <integer>,
    'SnapshotId' => '<string>',
    'VolumeType' => 'standard|io1|gp2|sc1|st1',
]);

Parameter Details

Result Syntax

[
    'Attachments' => [
        [
            'AttachTime' => <DateTime>,
            'DeleteOnTermination' => true || false,
            'Device' => '<string>',
            'InstanceId' => '<string>',
            'State' => 'attaching|attached|detaching|detached',
            'VolumeId' => '<string>',
        ],
        // ...
    ],
    'AvailabilityZone' => '<string>',
    'CreateTime' => <DateTime>,
    'Encrypted' => true || false,
    'Iops' => <integer>,
    'KmsKeyId' => '<string>',
    'Size' => <integer>,
    'SnapshotId' => '<string>',
    'State' => 'creating|available|in-use|deleting|deleted|error',
    'Tags' => [
        [
            'Key' => '<string>',
            'Value' => '<string>',
        ],
        // ...
    ],
    'VolumeId' => '<string>',
    'VolumeType' => 'standard|io1|gp2|sc1|st1',
]

Result Details

Errors

There are no errors described for this operation.

CreateVpc

$result = $client->createVpc([/* ... */]);
$promise = $client->createVpcAsync([/* ... */]);

Creates a VPC with the specified CIDR block.

The smallest VPC you can create uses a /28 netmask (16 IP addresses), and the largest uses a /16 netmask (65,536 IP addresses). To help you decide how big to make your VPC, see Your VPC and Subnets in the Amazon Virtual Private Cloud User Guide.

By default, each instance you launch in the VPC has the default DHCP options, which includes only a default DNS server that we provide (AmazonProvidedDNS). For more information about DHCP options, see DHCP Options Sets in the Amazon Virtual Private Cloud User Guide.

You can specify the instance tenancy value for the VPC when you create it. You can't change this value for the VPC after you create it. For more information, see Dedicated Instances in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->createVpc([
    'CidrBlock' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'InstanceTenancy' => 'default|dedicated|host',
]);

Parameter Details

Result Syntax

[
    'Vpc' => [
        'CidrBlock' => '<string>',
        'DhcpOptionsId' => '<string>',
        'InstanceTenancy' => 'default|dedicated|host',
        'IsDefault' => true || false,
        'State' => 'pending|available',
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'VpcId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateVpcEndpoint

$result = $client->createVpcEndpoint([/* ... */]);
$promise = $client->createVpcEndpointAsync([/* ... */]);

Creates a VPC endpoint for a specified AWS service. An endpoint enables you to create a private connection between your VPC and another AWS service in your account. You can specify an endpoint policy to attach to the endpoint that will control access to the service from your VPC. You can also specify the VPC route tables that use the endpoint.

Currently, only endpoints to Amazon S3 are supported.

Parameter Syntax

$result = $client->createVpcEndpoint([
    'ClientToken' => '<string>',
    'DryRun' => true || false,
    'PolicyDocument' => '<string>',
    'RouteTableIds' => ['<string>', ...],
    'ServiceName' => '<string>', // REQUIRED
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'ClientToken' => '<string>',
    'VpcEndpoint' => [
        'CreationTimestamp' => <DateTime>,
        'PolicyDocument' => '<string>',
        'RouteTableIds' => ['<string>', ...],
        'ServiceName' => '<string>',
        'State' => 'Pending|Available|Deleting|Deleted',
        'VpcEndpointId' => '<string>',
        'VpcId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateVpcPeeringConnection

$result = $client->createVpcPeeringConnection([/* ... */]);
$promise = $client->createVpcPeeringConnectionAsync([/* ... */]);

Requests a VPC peering connection between two VPCs: a requester VPC that you own and a peer VPC with which to create the connection. The peer VPC can belong to another AWS account. The requester VPC and peer VPC cannot have overlapping CIDR blocks.

The owner of the peer VPC must accept the peering request to activate the peering connection. The VPC peering connection request expires after 7 days, after which it cannot be accepted or rejected.

A CreateVpcPeeringConnection request between VPCs with overlapping CIDR blocks results in the VPC peering connection having a status of failed.

Parameter Syntax

$result = $client->createVpcPeeringConnection([
    'DryRun' => true || false,
    'PeerOwnerId' => '<string>',
    'PeerVpcId' => '<string>',
    'VpcId' => '<string>',
]);

Parameter Details

Result Syntax

[
    'VpcPeeringConnection' => [
        'AccepterVpcInfo' => [
            'CidrBlock' => '<string>',
            'OwnerId' => '<string>',
            'PeeringOptions' => [
                'AllowEgressFromLocalClassicLinkToRemoteVpc' => true || false,
                'AllowEgressFromLocalVpcToRemoteClassicLink' => true || false,
            ],
            'VpcId' => '<string>',
        ],
        'ExpirationTime' => <DateTime>,
        'RequesterVpcInfo' => [
            'CidrBlock' => '<string>',
            'OwnerId' => '<string>',
            'PeeringOptions' => [
                'AllowEgressFromLocalClassicLinkToRemoteVpc' => true || false,
                'AllowEgressFromLocalVpcToRemoteClassicLink' => true || false,
            ],
            'VpcId' => '<string>',
        ],
        'Status' => [
            'Code' => 'initiating-request|pending-acceptance|active|deleted|rejected|failed|expired|provisioning|deleting',
            'Message' => '<string>',
        ],
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'VpcPeeringConnectionId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateVpnConnection

$result = $client->createVpnConnection([/* ... */]);
$promise = $client->createVpnConnectionAsync([/* ... */]);

Creates a VPN connection between an existing virtual private gateway and a VPN customer gateway. The only supported connection type is ipsec.1.

The response includes information that you need to give to your network administrator to configure your customer gateway.

If you decide to shut down your VPN connection for any reason and later create a new VPN connection, you must reconfigure your customer gateway with the new information returned from this call.

This is an idempotent operation. If you perform the operation more than once, Amazon EC2 doesn't return an error.

For more information about VPN connections, see Adding a Hardware Virtual Private Gateway to Your VPC in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->createVpnConnection([
    'CustomerGatewayId' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'Options' => [
        'StaticRoutesOnly' => true || false,
    ],
    'Type' => '<string>', // REQUIRED
    'VpnGatewayId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'VpnConnection' => [
        'CustomerGatewayConfiguration' => '<string>',
        'CustomerGatewayId' => '<string>',
        'Options' => [
            'StaticRoutesOnly' => true || false,
        ],
        'Routes' => [
            [
                'DestinationCidrBlock' => '<string>',
                'Source' => 'Static',
                'State' => 'pending|available|deleting|deleted',
            ],
            // ...
        ],
        'State' => 'pending|available|deleting|deleted',
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'Type' => 'ipsec.1',
        'VgwTelemetry' => [
            [
                'AcceptedRouteCount' => <integer>,
                'LastStatusChange' => <DateTime>,
                'OutsideIpAddress' => '<string>',
                'Status' => 'UP|DOWN',
                'StatusMessage' => '<string>',
            ],
            // ...
        ],
        'VpnConnectionId' => '<string>',
        'VpnGatewayId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

CreateVpnConnectionRoute

$result = $client->createVpnConnectionRoute([/* ... */]);
$promise = $client->createVpnConnectionRouteAsync([/* ... */]);

Creates a static route associated with a VPN connection between an existing virtual private gateway and a VPN customer gateway. The static route allows traffic to be routed from the virtual private gateway to the VPN customer gateway.

For more information about VPN connections, see Adding a Hardware Virtual Private Gateway to Your VPC in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->createVpnConnectionRoute([
    'DestinationCidrBlock' => '<string>', // REQUIRED
    'VpnConnectionId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

CreateVpnGateway

$result = $client->createVpnGateway([/* ... */]);
$promise = $client->createVpnGatewayAsync([/* ... */]);

Creates a virtual private gateway. A virtual private gateway is the endpoint on the VPC side of your VPN connection. You can create a virtual private gateway before creating the VPC itself.

For more information about virtual private gateways, see Adding a Hardware Virtual Private Gateway to Your VPC in the Amazon Virtual Private Cloud User Guide.

Parameter Syntax

$result = $client->createVpnGateway([
    'AvailabilityZone' => '<string>',
    'DryRun' => true || false,
    'Type' => 'ipsec.1', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'VpnGateway' => [
        'AvailabilityZone' => '<string>',
        'State' => 'pending|available|deleting|deleted',
        'Tags' => [
            [
                'Key' => '<string>',
                'Value' => '<string>',
            ],
            // ...
        ],
        'Type' => 'ipsec.1',
        'VpcAttachments' => [
            [
                'State' => 'attaching|attached|detaching|detached',
                'VpcId' => '<string>',
            ],
            // ...
        ],
        'VpnGatewayId' => '<string>',
    ],
]

Result Details

Errors

There are no errors described for this operation.

DeleteCustomerGateway

$result = $client->deleteCustomerGateway([/* ... */]);
$promise = $client->deleteCustomerGatewayAsync([/* ... */]);

Deletes the specified customer gateway. You must delete the VPN connection before you can delete the customer gateway.

Parameter Syntax

$result = $client->deleteCustomerGateway([
    'CustomerGatewayId' => '<string>', // REQUIRED
    'DryRun' => true || false,
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteDhcpOptions

$result = $client->deleteDhcpOptions([/* ... */]);
$promise = $client->deleteDhcpOptionsAsync([/* ... */]);

Deletes the specified set of DHCP options. You must disassociate the set of DHCP options before you can delete it. You can disassociate the set of DHCP options by associating either a new set of options or the default set of options with the VPC.

Parameter Syntax

$result = $client->deleteDhcpOptions([
    'DhcpOptionsId' => '<string>', // REQUIRED
    'DryRun' => true || false,
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteFlowLogs

$result = $client->deleteFlowLogs([/* ... */]);
$promise = $client->deleteFlowLogsAsync([/* ... */]);

Deletes one or more flow logs.

Parameter Syntax

$result = $client->deleteFlowLogs([
    'FlowLogIds' => ['<string>', ...], // REQUIRED
]);

Parameter Details

Result Syntax

[
    'Unsuccessful' => [
        [
            'Error' => [
                'Code' => '<string>',
                'Message' => '<string>',
            ],
            'ResourceId' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

There are no errors described for this operation.

DeleteInternetGateway

$result = $client->deleteInternetGateway([/* ... */]);
$promise = $client->deleteInternetGatewayAsync([/* ... */]);

Deletes the specified Internet gateway. You must detach the Internet gateway from the VPC before you can delete it.

Parameter Syntax

$result = $client->deleteInternetGateway([
    'DryRun' => true || false,
    'InternetGatewayId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteKeyPair

$result = $client->deleteKeyPair([/* ... */]);
$promise = $client->deleteKeyPairAsync([/* ... */]);

Deletes the specified key pair, by removing the public key from Amazon EC2.

Parameter Syntax

$result = $client->deleteKeyPair([
    'DryRun' => true || false,
    'KeyName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteNatGateway

$result = $client->deleteNatGateway([/* ... */]);
$promise = $client->deleteNatGatewayAsync([/* ... */]);

Deletes the specified NAT gateway. Deleting a NAT gateway disassociates its Elastic IP address, but does not release the address from your account. Deleting a NAT gateway does not delete any NAT gateway routes in your route tables.

Parameter Syntax

$result = $client->deleteNatGateway([
    'NatGatewayId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'NatGatewayId' => '<string>',
]

Result Details

Errors

There are no errors described for this operation.

DeleteNetworkAcl

$result = $client->deleteNetworkAcl([/* ... */]);
$promise = $client->deleteNetworkAclAsync([/* ... */]);

Deletes the specified network ACL. You can't delete the ACL if it's associated with any subnets. You can't delete the default network ACL.

Parameter Syntax

$result = $client->deleteNetworkAcl([
    'DryRun' => true || false,
    'NetworkAclId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteNetworkAclEntry

$result = $client->deleteNetworkAclEntry([/* ... */]);
$promise = $client->deleteNetworkAclEntryAsync([/* ... */]);

Deletes the specified ingress or egress entry (rule) from the specified network ACL.

Parameter Syntax

$result = $client->deleteNetworkAclEntry([
    'DryRun' => true || false,
    'Egress' => true || false, // REQUIRED
    'NetworkAclId' => '<string>', // REQUIRED
    'RuleNumber' => <integer>, // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteNetworkInterface

$result = $client->deleteNetworkInterface([/* ... */]);
$promise = $client->deleteNetworkInterfaceAsync([/* ... */]);

Deletes the specified network interface. You must detach the network interface before you can delete it.

Parameter Syntax

$result = $client->deleteNetworkInterface([
    'DryRun' => true || false,
    'NetworkInterfaceId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeletePlacementGroup

$result = $client->deletePlacementGroup([/* ... */]);
$promise = $client->deletePlacementGroupAsync([/* ... */]);

Deletes the specified placement group. You must terminate all instances in the placement group before you can delete the placement group. For more information about placement groups and cluster instances, see Cluster Instances in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->deletePlacementGroup([
    'DryRun' => true || false,
    'GroupName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteRoute

$result = $client->deleteRoute([/* ... */]);
$promise = $client->deleteRouteAsync([/* ... */]);

Deletes the specified route from the specified route table.

Parameter Syntax

$result = $client->deleteRoute([
    'DestinationCidrBlock' => '<string>', // REQUIRED
    'DryRun' => true || false,
    'RouteTableId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteRouteTable

$result = $client->deleteRouteTable([/* ... */]);
$promise = $client->deleteRouteTableAsync([/* ... */]);

Deletes the specified route table. You must disassociate the route table from any subnets before you can delete it. You can't delete the main route table.

Parameter Syntax

$result = $client->deleteRouteTable([
    'DryRun' => true || false,
    'RouteTableId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteSecurityGroup

$result = $client->deleteSecurityGroup([/* ... */]);
$promise = $client->deleteSecurityGroupAsync([/* ... */]);

Deletes a security group.

If you attempt to delete a security group that is associated with an instance, or is referenced by another security group, the operation fails with InvalidGroup.InUse in EC2-Classic or DependencyViolation in EC2-VPC.

Parameter Syntax

$result = $client->deleteSecurityGroup([
    'DryRun' => true || false,
    'GroupId' => '<string>',
    'GroupName' => '<string>',
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteSnapshot

$result = $client->deleteSnapshot([/* ... */]);
$promise = $client->deleteSnapshotAsync([/* ... */]);

Deletes the specified snapshot.

When you make periodic snapshots of a volume, the snapshots are incremental, and only the blocks on the device that have changed since your last snapshot are saved in the new snapshot. When you delete a snapshot, only the data not needed for any other snapshot is removed. So regardless of which prior snapshots have been deleted, all active snapshots will have access to all the information needed to restore the volume.

You cannot delete a snapshot of the root device of an EBS volume used by a registered AMI. You must first de-register the AMI before you can delete the snapshot.

For more information, see Deleting an Amazon EBS Snapshot in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->deleteSnapshot([
    'DryRun' => true || false,
    'SnapshotId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteSpotDatafeedSubscription

$result = $client->deleteSpotDatafeedSubscription([/* ... */]);
$promise = $client->deleteSpotDatafeedSubscriptionAsync([/* ... */]);

Deletes the data feed for Spot instances.

Parameter Syntax

$result = $client->deleteSpotDatafeedSubscription([
    'DryRun' => true || false,
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteSubnet

$result = $client->deleteSubnet([/* ... */]);
$promise = $client->deleteSubnetAsync([/* ... */]);

Deletes the specified subnet. You must terminate all running instances in the subnet before you can delete the subnet.

Parameter Syntax

$result = $client->deleteSubnet([
    'DryRun' => true || false,
    'SubnetId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteTags

$result = $client->deleteTags([/* ... */]);
$promise = $client->deleteTagsAsync([/* ... */]);

Deletes the specified set of tags from the specified set of resources. This call is designed to follow a DescribeTags request.

For more information about tags, see Tagging Your Resources in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->deleteTags([
    'DryRun' => true || false,
    'Resources' => ['<string>', ...], // REQUIRED
    'Tags' => [
        [
            'Key' => '<string>',
            'Value' => '<string>',
        ],
        // ...
    ],
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteVolume

$result = $client->deleteVolume([/* ... */]);
$promise = $client->deleteVolumeAsync([/* ... */]);

Deletes the specified EBS volume. The volume must be in the available state (not attached to an instance).

For more information, see Deleting an Amazon EBS Volume in the Amazon Elastic Compute Cloud User Guide.

Parameter Syntax

$result = $client->deleteVolume([
    'DryRun' => true || false,
    'VolumeId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteVpc

$result = $client->deleteVpc([/* ... */]);
$promise = $client->deleteVpcAsync([/* ... */]);

Deletes the specified VPC. You must detach or delete all gateways and resources that are associated with the VPC before you can delete it. For example, you must terminate all instances running in the VPC, delete all security groups associated with the VPC (except the default one), delete all route tables associated with the VPC (except the default one), and so on.

Parameter Syntax

$result = $client->deleteVpc([
    'DryRun' => true || false,
    'VpcId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteVpcEndpoints

$result = $client->deleteVpcEndpoints([/* ... */]);
$promise = $client->deleteVpcEndpointsAsync([/* ... */]);

Deletes one or more specified VPC endpoints. Deleting the endpoint also deletes the endpoint routes in the route tables that were associated with the endpoint.

Parameter Syntax

$result = $client->deleteVpcEndpoints([
    'DryRun' => true || false,
    'VpcEndpointIds' => ['<string>', ...], // REQUIRED
]);

Parameter Details

Result Syntax

[
    'Unsuccessful' => [
        [
            'Error' => [
                'Code' => '<string>',
                'Message' => '<string>',
            ],
            'ResourceId' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

There are no errors described for this operation.

DeleteVpcPeeringConnection

$result = $client->deleteVpcPeeringConnection([/* ... */]);
$promise = $client->deleteVpcPeeringConnectionAsync([/* ... */]);

Deletes a VPC peering connection. Either the owner of the requester VPC or the owner of the peer VPC can delete the VPC peering connection if it's in the active state. The owner of the requester VPC can delete a VPC peering connection in the pending-acceptance state.

Parameter Syntax

$result = $client->deleteVpcPeeringConnection([
    'DryRun' => true || false,
    'VpcPeeringConnectionId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'Return' => true || false,
]

Result Details

Errors

There are no errors described for this operation.

DeleteVpnConnection

$result = $client->deleteVpnConnection([/* ... */]);
$promise = $client->deleteVpnConnectionAsync([/* ... */]);

Deletes the specified VPN connection.

If you're deleting the VPC and its associated components, we recommend that you detach the virtual private gateway from the VPC and delete the VPC before deleting the VPN connection. If you believe that the tunnel credentials for your VPN connection have been compromised, you can delete the VPN connection and create a new one that has new keys, without needing to delete the VPC or virtual private gateway. If you create a new VPN connection, you must reconfigure the customer gateway using the new configuration information returned with the new VPN connection ID.

Parameter Syntax

$result = $client->deleteVpnConnection([
    'DryRun' => true || false,
    'VpnConnectionId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteVpnConnectionRoute

$result = $client->deleteVpnConnectionRoute([/* ... */]);
$promise = $client->deleteVpnConnectionRouteAsync([/* ... */]);

Deletes the specified static route associated with a VPN connection between an existing virtual private gateway and a VPN customer gateway. The static route allows traffic to be routed from the virtual private gateway to the VPN customer gateway.

Parameter Syntax

$result = $client->deleteVpnConnectionRoute([
    'DestinationCidrBlock' => '<string>', // REQUIRED
    'VpnConnectionId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeleteVpnGateway

$result = $client->deleteVpnGateway([/* ... */]);
$promise = $client->deleteVpnGatewayAsync([/* ... */]);

Deletes the specified virtual private gateway. We recommend that before you delete a virtual private gateway, you detach it from the VPC and delete the VPN connection. Note that you don't need to delete the virtual private gateway if you plan to delete and recreate the VPN connection between your VPC and your network.

Parameter Syntax

$result = $client->deleteVpnGateway([
    'DryRun' => true || false,
    'VpnGatewayId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DeregisterImage

$result = $client->deregisterImage([/* ... */]);
$promise = $client->deregisterImageAsync([/* ... */]);

Deregisters the specified AMI. After you deregister an AMI, it can't be used to launch new instances.

This command does not delete the AMI.

Parameter Syntax

$result = $client->deregisterImage([
    'DryRun' => true || false,
    'ImageId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

There are no errors described for this operation.

DescribeAccountAttributes

$result = $client->describeAccountAttributes([/* ... */]);
$promise = $client->describeAccountAttributesAsync([/* ... */]);

Describes attributes of your AWS account. The following are the supported account attributes:

• supported-platforms: Indicates whether your account can launch instances into EC2-Classic and EC2-VPC, or only into EC2-VPC.

• default-vpc: The ID of the default VPC for your account, or none.

• max-instances: The maximum number of On-Demand instances that you can run.

• vpc-max-security-groups-per-interface: The maximum number of security groups that you can assign to a network interface.

• max-elastic-ips: The maximum number of Elastic IP addresses that you can allocate for use with EC2-Classic.

• vpc-max-elastic-ips: The maximum number of Elastic IP addresses that you can allocate for use with EC2-VPC.

Parameter Syntax

$result = $client->describeAccountAttributes([
    'AttributeNames' => ['<string>', ...],
    'DryRun' => true || false,
]);

Parameter Details

Result Syntax

[
    'AccountAttributes' => [
        [
            'AttributeName' => '<string>',
            'AttributeValues' => [
                [
                    'AttributeValue' => '<string>',
                ],
                // ...
            ],
        ],
        // ...
    ],
]

Result Details

Errors

There are no errors described for this operation.

DescribeAddresses

$result = $client->describeAddresses([/* ... */]);
$promise = $client->describeAddressesAsync([/* ... */]);