SecurityGroupRuleRequest
Describes a security group rule.
You must specify exactly one of the following parameters, based on the rule type:
-
CidrIpv4
-
CidrIpv6
-
PrefixListId
-
ReferencedGroupId
When you modify a rule, you cannot change the rule type. For example, if the rule
uses an IPv4 address range, you must use CidrIpv4 to specify a new IPv4
address range.
Contents
- CidrIpv4
-
The IPv4 CIDR range. To specify a single IPv4 address, use the /32 prefix length.
Type: String
Required: No
- CidrIpv6
-
The IPv6 CIDR range. To specify a single IPv6 address, use the /128 prefix length.
Type: String
Required: No
- Description
-
The description of the security group rule.
Type: String
Required: No
- FromPort
-
If the protocol is TCP or UDP, this is the start of the port range. If the protocol is ICMP or ICMPv6, this is the ICMP type or -1 (all ICMP types).
Type: Integer
Required: No
- IpProtocol
-
The IP protocol name (
tcp,udp,icmp,icmpv6) or number (see Protocol Numbers). Use
-1to specify all protocols.Type: String
Required: No
- PrefixListId
-
The ID of the prefix list.
Type: String
Required: No
- ReferencedGroupId
-
The ID of the security group that is referenced in the security group rule.
Type: String
Required: No
- ToPort
-
If the protocol is TCP or UDP, this is the end of the port range. If the protocol is ICMP or ICMPv6, this is the ICMP code or -1 (all ICMP codes). If the start port is -1 (all ICMP types), then the end port must be -1 (all ICMP codes).
Type: Integer
Required: No
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following:
