URI HTTP methods Schemas Properties See also

Sources: add

URI

/v1/flows/flowArn/source

HTTP methods

POST

Operation ID: AddFlowSources

Adds sources to an existing flow. You can add up to one additional source, for a total of two, to each flow. You must enable source failover on the flow before you can add a second source.

Both sources on the flow must use the same protocol. (However, you can have one source that uses RTP and the other that uses RTP-FEC.)

Path parameters
Name	Type	Required	Description
`flowArn`	String	True	The Amazon Resource Name (ARN) of the flow.

Responses
Status code	Response model	Description
`201`	`AddFlowSourcesResponse`	MediaConnect created the new resource successfully.
`400`	`ResponseError`	The request that you submitted is not valid.
`403`	`ResponseError`	You don't have the required permissions to perform this operation.
`404`	`ResponseError`	MediaConnect did not find the resource that you specified in the request.
`429`	`ResponseError`	You have exceeded the service request rate limit for your MediaConnect account.
`500`	`ResponseError`	MediaConnect can't fulfill your request because it encountered an unexpected condition.
`503`	`ResponseError`	MediaConnect is currently unavailable. Try again later.

Schemas

Request bodies


{
  "sources": [
    {
      "streamId": "string",
      "minLatency": integer,
      "vpcInterfaceName": "string",
      "maxLatency": integer,
      "description": "string",
      "maxBitrate": integer,
      "entitlementArn": "string",
      "sourceListenerPort": integer,
      "mediaStreamSourceConfigurations": [
        {
          "mediaStreamName": "string",
          "encodingName": enum,
          "inputConfigurations": [
            {
              "inputPort": integer,
              "interface": {
                "name": "string"
              }
            }
          ]
        }
      ],
      "sourceListenerAddress": "string",
      "whitelistCidr": "string",
      "senderIpAddress": "string",
      "protocol": enum,
      "senderControlPort": integer,
      "name": "string",
      "gatewayBridgeSource": {
        "bridgeArn": "string",
        "vpcInterfaceAttachment": {
          "vpcInterfaceName": "string"
        }
      },
      "decryption": {
        "resourceId": "string",
        "roleArn": "string",
        "secretArn": "string",
        "constantInitializationVector": "string",
        "keyType": enum,
        "region": "string",
        "deviceId": "string",
        "url": "string",
        "algorithm": enum
      },
      "ingestPort": integer,
      "maxSyncBuffer": integer
    }
  ]
}

Response bodies


{
  "sources": [
    {
      "sourceArn": "string",
      "vpcInterfaceName": "string",
      "description": "string",
      "entitlementArn": "string",
      "transport": {
        "streamId": "string",
        "minLatency": integer,
        "maxLatency": integer,
        "maxBitrate": integer,
        "sourceListenerPort": integer,
        "smoothingLatency": integer,
        "remoteId": "string",
        "sourceListenerAddress": "string",
        "senderIpAddress": "string",
        "protocol": enum,
        "senderControlPort": integer,
        "cidrAllowList": [
          "string"
        ],
        "maxSyncBuffer": integer
      },
      "mediaStreamSourceConfigurations": [
        {
          "mediaStreamName": "string",
          "encodingName": enum,
          "inputConfigurations": [
            {
              "inputIp": "string",
              "inputPort": integer,
              "interface": {
                "name": "string"
              }
            }
          ]
        }
      ],
      "whitelistCidr": "string",
      "senderIpAddress": "string",
      "senderControlPort": integer,
      "name": "string",
      "gatewayBridgeSource": {
        "bridgeArn": "string",
        "vpcInterfaceAttachment": {
          "vpcInterfaceName": "string"
        }
      },
      "dataTransferSubscriberFeePercent": integer,
      "ingestIp": "string",
      "decryption": {
        "resourceId": "string",
        "roleArn": "string",
        "secretArn": "string",
        "constantInitializationVector": "string",
        "keyType": enum,
        "region": "string",
        "deviceId": "string",
        "url": "string",
        "algorithm": enum
      },
      "ingestPort": integer
    }
  ],
  "flowArn": "string"
}


{
  "message": "string"
}

Properties

AddFlowSourcesRequest

Adds sources to an existing flow. You can add up to one additional source, for a total of two, to each flow.

Property	Type	Required	Description
`sources`	Array of type SetSourceRequest	True	The list of sources that you want to add.

AddFlowSourcesResponse

The result of a successful AddFlowSources request. The response includes the details of the sources that you just added.

Property	Type	Required	Description
`flowArn`	string	True	The ARN of the flow that you just added sources to.
`sources`	Array of type Source	True	The details of the sources that you just added.

Encryption

Information about the encryption of the flow.

Property	Type	Required	Description
`algorithm`	string Values: `aes128 \| aes192 \| aes256`	False	The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).
`constantInitializationVector`	string	False	A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.
`deviceId`	string	False	The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.
`keyType`	string Values: `speke \| static-key \| srt-password`	False	The type of key that is used for the encryption. If you don't specify a `keyType` value, the service uses the default setting (`static-key`).
`region`	string	False	The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.
`resourceId`	string	False	An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.
`roleArn`	string	True	The Amazon Resource Name (ARN) of the role that you created during setup (when you set up MediaConnect as a trusted entity).
`secretArn`	string	False	The ARN of the secret that you created in AWS Secrets Manager to store the encryption key.
`url`	string	False	The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

GatewayBridgeSource

The source configuration for cloud flows receiving a stream from a bridge.

Property	Type	Required	Description
`bridgeArn`	string	True	The ARN of the bridge feeding this flow.
`vpcInterfaceAttachment`	VpcInterfaceAttachment	False	The name of the VPC interface attachment to use for this bridge source.

InputConfiguration

The transport parameters associated with an incoming media stream.

Property Type Required Description

Property	Type	Required	Description
`inputIp`	string	True	The IP address that the flow listens on for incoming content for a media stream.
`inputPort`	integer Format: int32	True	The port that the flow listens on for an incoming media stream.
`interface`	Interface	True	The VPC interface where the media stream comes in from.

inputIp

string

True

The IP address that the flow listens on for incoming content for a media stream.

inputPort

integer

Format: int32

True

The port that the flow listens on for an incoming media stream.

interface

Interface

True

The VPC interface where the media stream comes in from.

InputConfigurationRequest

The transport parameters that you want to associate with an incoming media stream.

Property Type Required Description

Property	Type	Required	Description
`inputPort`	integer Format: int32	True	The port that you want the flow to listen on for an incoming media stream.
`interface`	InterfaceRequest	True	The VPC interface that you want to use for the incoming media stream.

inputPort

integer

Format: int32

True

The port that you want the flow to listen on for an incoming media stream.

interface

InterfaceRequest

True

The VPC interface that you want to use for the incoming media stream.

Interface

The VPC interface that you want to use for the media stream associated with the output.

Property	Type	Required	Description
`name`	string	True	The name of the VPC interface that you want to use for the media stream associated with the output.

InterfaceRequest

The VPC interface that you want to designate where the media stream is coming from or going to.

Property	Type	Required	Description
`name`	string	True	The name of the VPC interface.

MediaStreamSourceConfiguration

The media stream that is associated with the source, and the parameters for that association.

Property Type Required Description

Property	Type	Required	Description
`encodingName`	string Values: `jxsv \| raw \| smpte291 \| pcm`	True	The format that was used to encode the data. For ancillary data streams, set the encoding name to `smpte291`. For audio streams, set the encoding name to `pcm`. For video, 2110 streams, set the encoding name to `raw`. For video, JPEG XS streams, set the encoding name to `jxsv`.
`inputConfigurations`	Array of type InputConfiguration	False	The media streams that you want to associate with the source.
`mediaStreamName`	string	True	A name that helps you distinguish one media stream from another.

encodingName

string

Values: jxsv | raw | smpte291 | pcm

True

The format that was used to encode the data.

For ancillary data streams, set the encoding name to smpte291.

For audio streams, set the encoding name to pcm.

For video, 2110 streams, set the encoding name to raw.

For video, JPEG XS streams, set the encoding name to jxsv.

inputConfigurations

Array of type InputConfiguration

False

The media streams that you want to associate with the source.

mediaStreamName

string

True

A name that helps you distinguish one media stream from another.

MediaStreamSourceConfigurationRequest

The media stream that you want to associate with the source, and the parameters for that association.

Property Type Required Description

Property	Type	Required	Description
`encodingName`	string Values: `jxsv \| raw \| smpte291 \| pcm`	True	The format that was used to encode the data. For ancillary data streams, set the encoding name to `smpte291`. For audio streams, set the encoding name to `pcm`. For video, 2110 streams, set the encoding name to `raw`. For video, JPEG XS streams, set the encoding name to `jxsv`.
`inputConfigurations`	Array of type InputConfigurationRequest	False	The media streams that you want to associate with the source.
`mediaStreamName`	string	True	The name of the media stream.

encodingName

string

Values: jxsv | raw | smpte291 | pcm

True

The format that was used to encode the data.

For ancillary data streams, set the encoding name to smpte291.

For audio streams, set the encoding name to pcm.

For video, 2110 streams, set the encoding name to raw.

For video, JPEG XS streams, set the encoding name to jxsv.

inputConfigurations

Array of type InputConfigurationRequest

False

The media streams that you want to associate with the source.

mediaStreamName

string

True

The name of the media stream.

ResponseError

An exception raised by MediaConnect when you submit a request that cannot be completed. For more information, see the error message and documentation for the operation.

Property	Type	Required	Description
`message`	string	True	The specific error message that MediaConnect returns to help you understand the reason that the request did not succeed.

SetGatewayBridgeSourceRequest

The source configuration for cloud flows receiving a stream from a bridge.

Property	Type	Required	Description
`bridgeArn`	string	True	The ARN of the bridge feeding this flow.
`vpcInterfaceAttachment`	VpcInterfaceAttachment	False	The name of the VPC interface attachment to use for this bridge source.

SetSourceRequest

The settings for the source that you want to use for the new flow.

Property	Type	Required	Description
`decryption`	Encryption	False	The type of encryption that is used on the content ingested from the source.
`description`	string	False	A description of the source. This description is not visible outside of the current AWS account.
`entitlementArn`	string	False	The ARN of the entitlement that allows you to subscribe to the flow. The content originator grants the entitlement, and the ARN is auto-generated as part of the originator's flow.
`gatewayBridgeSource`	SetGatewayBridgeSourceRequest	False	The source configuration for cloud flows receiving a stream from a bridge.
`ingestPort`	integer	False	The port that the flow listens on for incoming content. If the protocol of the source is Zixi, the port must be set to 2088.
`maxBitrate`	integer Format: int64	False	The maximum bitrate for RIST, RTP, and RTP-FEC streams.
`maxLatency`	integer Format: int64	False	The maximum latency in milliseconds. This parameter applies only to RIST-based, Zixi-based, and Fujitsu-based streams.
`maxSyncBuffer`	integer	False	The size of the buffer (in milliseconds) to use to sync incoming source data.
`mediaStreamSourceConfigurations`	Array of type MediaStreamSourceConfigurationRequest	False	The media stream that is associated with the source, and the parameters for that association.
`minLatency`	integer Format: int64	False	The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.
`name`	string	False	The name of the source.
`protocol`	string Values: `zixi-push \| rtp-fec \| rtp \| zixi-pull \| rist \| st2110-jpegxs \| cdi \| srt-listener \| srt-caller \| fujitsu-qos \| udp`	False	The protocol that the source uses to deliver the content to MediaConnect.
`senderControlPort`	integer	False	The port that the flow uses to send outbound requests to initiate connection with the sender.
`senderIpAddress`	string	False	The IP address that the flow communicates with to initiate connection with the sender.
`sourceListenerAddress`	string	False	Source IP or domain name for SRT-caller protocol.
`sourceListenerPort`	integer	False	Source port for SRT-caller protocol.
`streamId`	string	False	The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.
`vpcInterfaceName`	string	False	The name of the VPC interface that you want to use for the source.
`whitelistCidr`	string	False	The range of IP addresses that are allowed to contribute content to your source. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

Source

The details of the sources of the flow.

Property	Type	Required	Description
`dataTransferSubscriberFeePercent`	integer	False	The percentage of the entitlement data transfer fee that you want the subscriber to be responsible for.
`decryption`	Encryption	False	The type of encryption that is used on the content ingested from the source.
`description`	string	False	A description of the source. This description is not visible outside of the current AWS account.
`entitlementArn`	string	False	The ARN of the entitlement that allows you to subscribe to content that comes from another AWS account. The entitlement is set by the content originator and the ARN is generated as part of the originator’s flow.
`gatewayBridgeSource`	GatewayBridgeSource	False	The source configuration for cloud flows receiving a stream from a bridge.
`ingestIp`	string	False	The IP address that the flow listens on for incoming content.
`ingestPort`	integer	False	The port that the flow listens on for incoming content. If the protocol of the source is Zixi, the port must be set to 2088.
`mediaStreamSourceConfigurations`	Array of type MediaStreamSourceConfiguration	False	The media stream that is associated with the source, and the parameters for that association.
`name`	string	True	The name of the source.
`senderControlPort`	integer Format: int32	False	The port that the flow uses to send outbound requests to initiate connection with the sender.
`senderIpAddress`	string	False	The IP address that the flow communicates with to initiate connection with the sender.
`sourceArn`	string	True	The ARN of the source.
`transport`	Transport	False	Attributes that are related to the transport stream.
`vpcInterfaceName`	string	False	The name of the VPC interface that the source content comes from.
`whitelistCidr`	string	False	The range of IP addresses that are allowed to contribute content to your source. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

Transport

Attributes that are related to the transport stream.

Property	Type	Required	Description
`cidrAllowList`	Array of type string	False	The range of IP addresses that are allowed to initiate output requests to this flow. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.
`maxBitrate`	integer Format: int64	False	The maximum bitrate for RIST, RTP, and RTP-FEC streams.
`maxLatency`	integer Format: int64	False	The maximum latency in milliseconds for a RIST source, a Zixi-based source, a Fujitsu-based source, or a Zixi-based output.
`maxSyncBuffer`	integer Format: int32	False	The size of the buffer (in milliseconds) to use to sync incoming source data.
`minLatency`	integer Format: int64	False	The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.
`protocol`	string Values: `zixi-push \| rtp-fec \| rtp \| zixi-pull \| rist \| st2110-jpegxs \| cdi \| srt-listener \| srt-caller \| fujitsu-qos \| udp`	True	The protocol that is used by the source or output.
`remoteId`	string	False	The identifier that is assigned to the Zixi receiver. This parameter applies only to outputs that use Zixi pull.
`senderControlPort`	integer Format: int32	False	The port that the flow uses to send outbound requests to initiate connection with the sender.
`senderIpAddress`	string	False	The IP address that the flow communicates with to initiate connection with the sender.
`smoothingLatency`	integer Format: int64	False	The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.
`sourceListenerAddress`	string	False	Source IP or domain name for SRT-caller protocol.
`sourceListenerPort`	integer	False	Source port for SRT-caller protocol.
`streamId`	string	False	The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.

VpcInterfaceAttachment

The VPC interface that you want to send your output to.

Property	Type	Required	Description
`vpcInterfaceName`	string	False	The name of the VPC interface that you want to send your output to.