Presets - AWS Elemental MediaConvert API Reference

Presets

URI

/2017-08-29/presets

HTTP methods

GET

Operation ID: ListPresets

Retrieve a JSON array of up to twenty of your presets. This will return the presets themselves, not just a list of them. To retrieve the next twenty presets, use the nextToken string returned with the array.

Query parameters
NameTypeRequiredDescription
categoryStringFalse
listByStringFalse
nextTokenStringFalse
maxResultsStringFalse
orderStringFalse
Responses
Status codeResponse modelDescription
200ListPresetsResponse

200 response

400ExceptionBody

The service can't process your request because of a problem in the request. Please check your request form and syntax.

403ExceptionBody

You don't have permissions for this action with the credentials you sent.

404ExceptionBody

The resource you requested does not exist.

409ExceptionBody

The service could not complete your request because there is a conflict with the current state of the resource.

429ExceptionBody

Too many requests have been sent in too short of a time. The service limits the rate at which it will accept requests.

500ExceptionBody

The service encountered an unexpected condition and cannot fulfill your request.

POST

Operation ID: CreatePreset

Create a new preset. For information about job templates see the User Guide at http://docs.aws.amazon.com/mediaconvert/latest/ug/what-is.html

Responses
Status codeResponse modelDescription
201CreatePresetResponse

201 response

400ExceptionBody

The service can't process your request because of a problem in the request. Please check your request form and syntax.

403ExceptionBody

You don't have permissions for this action with the credentials you sent.

404ExceptionBody

The resource you requested does not exist.

409ExceptionBody

The service could not complete your request because there is a conflict with the current state of the resource.

429ExceptionBody

Too many requests have been sent in too short of a time. The service limits the rate at which it will accept requests.

500ExceptionBody

The service encountered an unexpected condition and cannot fulfill your request.

OPTIONS

Supports CORS preflight requests.

Responses
Status codeResponse modelDescription
200None

The request completed successfully.

Schemas

Request bodies

{ "listBy": enum, "category": "string", "order": enum, "nextToken": "string", "maxResults": integer }
{ "description": "string", "category": "string", "name": "string", "settings": { "videoDescription": { "fixedAfd": integer, "width": integer, "scalingBehavior": enum, "crop": { "height": integer, "width": integer, "x": integer, "y": integer }, "height": integer, "videoPreprocessors": { "colorCorrector": { "brightness": integer, "colorSpaceConversion": enum, "sampleRangeConversion": enum, "clipLimits": { "minimumYUV": integer, "maximumYUV": integer, "minimumRGBTolerance": integer, "maximumRGBTolerance": integer }, "sdrReferenceWhiteLevel": integer, "contrast": integer, "hue": integer, "saturation": integer, "maxLuminance": integer, "hdr10Metadata": { "redPrimaryX": integer, "redPrimaryY": integer, "greenPrimaryX": integer, "greenPrimaryY": integer, "bluePrimaryX": integer, "bluePrimaryY": integer, "whitePointX": integer, "whitePointY": integer, "maxFrameAverageLightLevel": integer, "maxContentLightLevel": integer, "maxLuminance": integer, "minLuminance": integer }, "hdrToSdrToneMapper": enum }, "deinterlacer": { "algorithm": enum, "mode": enum, "control": enum }, "dolbyVision": { "profile": enum, "l6Mode": enum, "l6Metadata": { "maxCll": integer, "maxFall": integer }, "mapping": enum }, "hdr10Plus": { "masteringMonitorNits": integer, "targetMonitorNits": integer }, "imageInserter": { "insertableImages": [ { "width": integer, "height": integer, "imageX": integer, "imageY": integer, "duration": integer, "fadeIn": integer, "layer": integer, "imageInserterInput": "string", "startTime": "string", "fadeOut": integer, "opacity": integer } ], "sdrReferenceWhiteLevel": integer }, "noiseReducer": { "filter": enum, "filterSettings": { "strength": integer }, "spatialFilterSettings": { "strength": integer, "speed": integer, "postFilterSharpenStrength": integer }, "temporalFilterSettings": { "strength": integer, "speed": integer, "aggressiveMode": integer, "postTemporalSharpening": enum, "postTemporalSharpeningStrength": enum } }, "timecodeBurnin": { "fontSize": integer, "position": enum, "prefix": "string" }, "partnerWatermarking": { "nexguardFileMarkerSettings": { "license": "string", "preset": "string", "payload": integer, "strength": enum } } }, "timecodeInsertion": enum, "antiAlias": enum, "position": { "height": integer, "width": integer, "x": integer, "y": integer }, "sharpness": integer, "codecSettings": { "codec": enum, "av1Settings": { "gopSize": number, "numberBFramesBetweenReferenceFrames": integer, "slices": integer, "bitDepth": enum, "rateControlMode": enum, "qvbrSettings": { "qvbrQualityLevel": integer, "qvbrQualityLevelFineTune": number }, "maxBitrate": integer, "adaptiveQuantization": enum, "spatialAdaptiveQuantization": enum, "framerateControl": enum, "framerateConversionAlgorithm": enum, "framerateNumerator": integer, "framerateDenominator": integer, "filmGrainSynthesis": enum }, "avcIntraSettings": { "avcIntraClass": enum, "avcIntraUhdSettings": { "qualityTuningLevel": enum }, "interlaceMode": enum, "scanTypeConversionMode": enum, "framerateDenominator": integer, "slowPal": enum, "framerateControl": enum, "telecine": enum, "framerateNumerator": integer, "framerateConversionAlgorithm": enum }, "frameCaptureSettings": { "framerateNumerator": integer, "framerateDenominator": integer, "maxCaptures": integer, "quality": integer }, "h264Settings": { "interlaceMode": enum, "scanTypeConversionMode": enum, "parNumerator": integer, "numberReferenceFrames": integer, "syntax": enum, "softness": integer, "framerateDenominator": integer, "gopClosedCadence": integer, "hrdBufferInitialFillPercentage": integer, "gopSize": number, "slices": integer, "gopBReference": enum, "hrdBufferSize": integer, "maxBitrate": integer, "slowPal": enum, "parDenominator": integer, "spatialAdaptiveQuantization": enum, "temporalAdaptiveQuantization": enum, "flickerAdaptiveQuantization": enum, "entropyEncoding": enum, "bitrate": integer, "framerateControl": enum, "rateControlMode": enum, "qvbrSettings": { "qvbrQualityLevel": integer, "qvbrQualityLevelFineTune": number, "maxAverageBitrate": integer }, "codecProfile": enum, "telecine": enum, "framerateNumerator": integer, "minIInterval": integer, "adaptiveQuantization": enum, "saliencyAwareEncoding": enum, "codecLevel": enum, "fieldEncoding": enum, "sceneChangeDetect": enum, "qualityTuningLevel": enum, "framerateConversionAlgorithm": enum, "unregisteredSeiTimecode": enum, "gopSizeUnits": enum, "parControl": enum, "numberBFramesBetweenReferenceFrames": integer, "repeatPps": enum, "dynamicSubGop": enum, "hrdBufferFinalFillPercentage": integer, "bandwidthReductionFilter": { "strength": enum, "sharpening": enum }, "endOfStreamMarkers": enum }, "h265Settings": { "interlaceMode": enum, "scanTypeConversionMode": enum, "parNumerator": integer, "numberReferenceFrames": integer, "framerateDenominator": integer, "gopClosedCadence": integer, "alternateTransferFunctionSei": enum, "hrdBufferInitialFillPercentage": integer, "gopSize": number, "slices": integer, "gopBReference": enum, "hrdBufferSize": integer, "maxBitrate": integer, "slowPal": enum, "parDenominator": integer, "spatialAdaptiveQuantization": enum, "temporalAdaptiveQuantization": enum, "flickerAdaptiveQuantization": enum, "bitrate": integer, "framerateControl": enum, "rateControlMode": enum, "qvbrSettings": { "qvbrQualityLevel": integer, "qvbrQualityLevelFineTune": number, "maxAverageBitrate": integer }, "codecProfile": enum, "tiles": enum, "telecine": enum, "framerateNumerator": integer, "minIInterval": integer, "adaptiveQuantization": enum, "codecLevel": enum, "sceneChangeDetect": enum, "qualityTuningLevel": enum, "framerateConversionAlgorithm": enum, "unregisteredSeiTimecode": enum, "gopSizeUnits": enum, "parControl": enum, "numberBFramesBetweenReferenceFrames": integer, "temporalIds": enum, "sampleAdaptiveOffsetFilterMode": enum, "writeMp4PackagingType": enum, "dynamicSubGop": enum, "hrdBufferFinalFillPercentage": integer, "endOfStreamMarkers": enum, "bandwidthReductionFilter": { "strength": enum, "sharpening": enum } }, "mpeg2Settings": { "interlaceMode": enum, "scanTypeConversionMode": enum, "parNumerator": integer, "syntax": enum, "softness": integer, "framerateDenominator": integer, "gopClosedCadence": integer, "hrdBufferInitialFillPercentage": integer, "gopSize": number, "hrdBufferSize": integer, "maxBitrate": integer, "slowPal": enum, "parDenominator": integer, "spatialAdaptiveQuantization": enum, "temporalAdaptiveQuantization": enum, "bitrate": integer, "intraDcPrecision": enum, "framerateControl": enum, "rateControlMode": enum, "codecProfile": enum, "telecine": enum, "framerateNumerator": integer, "minIInterval": integer, "adaptiveQuantization": enum, "codecLevel": enum, "sceneChangeDetect": enum, "qualityTuningLevel": enum, "framerateConversionAlgorithm": enum, "gopSizeUnits": enum, "parControl": enum, "numberBFramesBetweenReferenceFrames": integer, "dynamicSubGop": enum, "hrdBufferFinalFillPercentage": integer }, "proresSettings": { "interlaceMode": enum, "scanTypeConversionMode": enum, "parNumerator": integer, "framerateDenominator": integer, "codecProfile": enum, "slowPal": enum, "parDenominator": integer, "framerateControl": enum, "telecine": enum, "chromaSampling": enum, "framerateNumerator": integer, "framerateConversionAlgorithm": enum, "parControl": enum }, "uncompressedSettings": { "framerateControl": enum, "framerateConversionAlgorithm": enum, "framerateNumerator": integer, "framerateDenominator": integer, "interlaceMode": enum, "scanTypeConversionMode": enum, "telecine": enum, "slowPal": enum, "fourcc": enum }, "vc3Settings": { "vc3Class": enum, "interlaceMode": enum, "scanTypeConversionMode": enum, "framerateConversionAlgorithm": enum, "telecine": enum, "slowPal": enum, "framerateControl": enum, "framerateDenominator": integer, "framerateNumerator": integer }, "vp8Settings": { "qualityTuningLevel": enum, "rateControlMode": enum, "gopSize": number, "maxBitrate": integer, "bitrate": integer, "hrdBufferSize": integer, "framerateControl": enum, "framerateConversionAlgorithm": enum, "framerateNumerator": integer, "framerateDenominator": integer, "parControl": enum, "parNumerator": integer, "parDenominator": integer }, "vp9Settings": { "qualityTuningLevel": enum, "rateControlMode": enum, "gopSize": number, "maxBitrate": integer, "bitrate": integer, "hrdBufferSize": integer, "framerateControl": enum, "framerateConversionAlgorithm": enum, "framerateNumerator": integer, "framerateDenominator": integer, "parControl": enum, "parNumerator": integer, "parDenominator": integer }, "xavcSettings": { "profile": enum, "xavcHdIntraCbgProfileSettings": { "xavcClass": enum }, "xavc4kIntraCbgProfileSettings": { "xavcClass": enum }, "xavc4kIntraVbrProfileSettings": { "xavcClass": enum }, "xavcHdProfileSettings": { "bitrateClass": enum, "slices": integer, "hrdBufferSize": integer, "qualityTuningLevel": enum, "interlaceMode": enum, "telecine": enum, "gopClosedCadence": integer, "gopBReference": enum, "flickerAdaptiveQuantization": enum }, "xavc4kProfileSettings": { "bitrateClass": enum, "slices": integer, "hrdBufferSize": integer, "codecProfile": enum, "qualityTuningLevel": enum, "gopClosedCadence": integer, "gopBReference": enum, "flickerAdaptiveQuantization": enum }, "softness": integer, "framerateDenominator": integer, "slowPal": enum, "spatialAdaptiveQuantization": enum, "temporalAdaptiveQuantization": enum, "entropyEncoding": enum, "framerateControl": enum, "framerateNumerator": integer, "adaptiveQuantization": enum, "framerateConversionAlgorithm": enum } }, "afdSignaling": enum, "dropFrameTimecode": enum, "respondToAfd": enum, "colorMetadata": enum }, "audioDescriptions": [ { "audioTypeControl": enum, "audioSourceName": "string", "audioNormalizationSettings": { "algorithm": enum, "algorithmControl": enum, "correctionGateLevel": integer, "loudnessLogging": enum, "targetLkfs": number, "peakCalculation": enum, "truePeakLimiterThreshold": number }, "audioChannelTaggingSettings": { "channelTag": enum, "channelTags": [ enum ] }, "codecSettings": { "codec": enum, "aacSettings": { "audioDescriptionBroadcasterMix": enum, "vbrQuality": enum, "bitrate": integer, "rateControlMode": enum, "codecProfile": enum, "codingMode": enum, "rawFormat": enum, "sampleRate": integer, "specification": enum }, "ac3Settings": { "bitrate": integer, "bitstreamMode": enum, "codingMode": enum, "dialnorm": integer, "dynamicRangeCompressionProfile": enum, "dynamicRangeCompressionLine": enum, "dynamicRangeCompressionRf": enum, "metadataControl": enum, "lfeFilter": enum, "sampleRate": integer }, "aiffSettings": { "bitDepth": integer, "channels": integer, "sampleRate": integer }, "eac3Settings": { "metadataControl": enum, "surroundExMode": enum, "loRoSurroundMixLevel": number, "phaseControl": enum, "dialnorm": integer, "ltRtSurroundMixLevel": number, "bitrate": integer, "ltRtCenterMixLevel": number, "passthroughControl": enum, "lfeControl": enum, "loRoCenterMixLevel": number, "attenuationControl": enum, "codingMode": enum, "surroundMode": enum, "bitstreamMode": enum, "lfeFilter": enum, "stereoDownmix": enum, "dynamicRangeCompressionRf": enum, "sampleRate": integer, "dynamicRangeCompressionLine": enum, "dcFilter": enum }, "eac3AtmosSettings": { "surroundExMode": enum, "loRoSurroundMixLevel": number, "ltRtSurroundMixLevel": number, "bitrate": integer, "ltRtCenterMixLevel": number, "loRoCenterMixLevel": number, "codingMode": enum, "bitstreamMode": enum, "stereoDownmix": enum, "dynamicRangeCompressionRf": enum, "sampleRate": integer, "dynamicRangeCompressionLine": enum, "downmixControl": enum, "dynamicRangeControl": enum, "meteringMode": enum, "dialogueIntelligence": enum, "speechThreshold": integer }, "flacSettings": { "bitDepth": integer, "channels": integer, "sampleRate": integer }, "mp2Settings": { "bitrate": integer, "channels": integer, "sampleRate": integer }, "mp3Settings": { "bitrate": integer, "channels": integer, "rateControlMode": enum, "sampleRate": integer, "vbrQuality": integer }, "opusSettings": { "bitrate": integer, "channels": integer, "sampleRate": integer }, "vorbisSettings": { "channels": integer, "sampleRate": integer, "vbrQuality": integer }, "wavSettings": { "bitDepth": integer, "channels": integer, "sampleRate": integer, "format": enum } }, "remixSettings": { "channelMapping": { "outputChannels": [ { "inputChannels": [ integer ], "inputChannelsFineTune": [ number ] } ] }, "channelsIn": integer, "channelsOut": integer, "audioDescriptionAudioChannel": integer, "audioDescriptionDataChannel": integer }, "streamName": "string", "languageCodeControl": enum, "audioType": integer, "customLanguageCode": "string", "languageCode": enum } ], "containerSettings": { "container": enum, "m3u8Settings": { "audioFramesPerPes": integer, "pcrControl": enum, "dataPTSControl": enum, "maxPcrInterval": integer, "pcrPid": integer, "pmtPid": integer, "privateMetadataPid": integer, "programNumber": integer, "patInterval": integer, "pmtInterval": integer, "scte35Source": enum, "scte35Pid": integer, "nielsenId3": enum, "timedMetadata": enum, "timedMetadataPid": integer, "transportStreamId": integer, "videoPid": integer, "ptsOffsetMode": enum, "ptsOffset": integer, "audioPids": [ integer ], "audioDuration": enum }, "f4vSettings": { "moovPlacement": enum }, "m2tsSettings": { "audioBufferModel": enum, "minEbpInterval": integer, "esRateInPes": enum, "patInterval": integer, "dvbNitSettings": { "nitInterval": integer, "networkId": integer, "networkName": "string" }, "dvbSdtSettings": { "outputSdt": enum, "sdtInterval": integer, "serviceName": "string", "serviceProviderName": "string" }, "scte35Source": enum, "scte35Pid": integer, "scte35Esam": { "scte35EsamPid": integer }, "klvMetadata": enum, "videoPid": integer, "dvbTdtSettings": { "tdtInterval": integer }, "pmtInterval": integer, "segmentationStyle": enum, "segmentationTime": number, "pmtPid": integer, "bitrate": integer, "audioPids": [ integer ], "privateMetadataPid": integer, "nielsenId3": enum, "timedMetadataPid": integer, "maxPcrInterval": integer, "transportStreamId": integer, "dvbSubPids": [ integer ], "rateMode": enum, "audioFramesPerPes": integer, "pcrControl": enum, "dataPTSControl": enum, "segmentationMarkers": enum, "ebpAudioInterval": enum, "forceTsVideoEbpOrder": enum, "programNumber": integer, "pcrPid": integer, "bufferModel": enum, "dvbTeletextPid": integer, "fragmentTime": number, "ebpPlacement": enum, "nullPacketBitrate": number, "audioDuration": enum, "ptsOffsetMode": enum, "ptsOffset": integer, "preventBufferUnderflow": enum }, "movSettings": { "clapAtom": enum, "cslgAtom": enum, "paddingControl": enum, "reference": enum, "mpeg2FourCCControl": enum }, "mp4Settings": { "cslgAtom": enum, "cttsVersion": integer, "freeSpaceBox": enum, "mp4MajorBrand": "string", "moovPlacement": enum, "audioDuration": enum }, "mpdSettings": { "accessibilityCaptionHints": enum, "captionContainerType": enum, "scte35Source": enum, "scte35Esam": enum, "audioDuration": enum, "timedMetadata": enum, "timedMetadataBoxVersion": enum, "timedMetadataSchemeIdUri": "string", "timedMetadataValue": "string", "manifestMetadataSignaling": enum, "klvMetadata": enum }, "cmfcSettings": { "scte35Source": enum, "scte35Esam": enum, "audioDuration": enum, "iFrameOnlyManifest": enum, "audioGroupId": "string", "audioRenditionSets": "string", "audioTrackType": enum, "descriptiveVideoServiceFlag": enum, "timedMetadata": enum, "timedMetadataBoxVersion": enum, "timedMetadataSchemeIdUri": "string", "timedMetadataValue": "string", "manifestMetadataSignaling": enum, "klvMetadata": enum }, "mxfSettings": { "afdSignaling": enum, "profile": enum, "xavcProfileSettings": { "durationMode": enum, "maxAncDataSize": integer } } }, "captionDescriptions": [ { "destinationSettings": { "destinationType": enum, "burninDestinationSettings": { "backgroundOpacity": integer, "shadowXOffset": integer, "teletextSpacing": enum, "alignment": enum, "outlineSize": integer, "yPosition": integer, "shadowColor": enum, "fontOpacity": integer, "fontSize": integer, "fontScript": enum, "fallbackFont": enum, "fontFileRegular": "string", "fontFileBold": "string", "fontFileItalic": "string", "fontFileBoldItalic": "string", "fontColor": enum, "hexFontColor": "string", "applyFontColor": enum, "backgroundColor": enum, "fontResolution": integer, "outlineColor": enum, "shadowYOffset": integer, "xPosition": integer, "shadowOpacity": integer, "stylePassthrough": enum }, "dvbSubDestinationSettings": { "backgroundOpacity": integer, "shadowXOffset": integer, "teletextSpacing": enum, "alignment": enum, "outlineSize": integer, "yPosition": integer, "shadowColor": enum, "fontOpacity": integer, "fontSize": integer, "fontScript": enum, "fallbackFont": enum, "fontFileRegular": "string", "fontFileBold": "string", "fontFileItalic": "string", "fontFileBoldItalic": "string", "fontColor": enum, "hexFontColor": "string", "applyFontColor": enum, "backgroundColor": enum, "fontResolution": integer, "outlineColor": enum, "shadowYOffset": integer, "xPosition": integer, "shadowOpacity": integer, "subtitlingType": enum, "ddsHandling": enum, "ddsXCoordinate": integer, "ddsYCoordinate": integer, "width": integer, "height": integer, "stylePassthrough": enum }, "sccDestinationSettings": { "framerate": enum }, "teletextDestinationSettings": { "pageNumber": "string", "pageTypes": [ enum ] }, "ttmlDestinationSettings": { "stylePassthrough": enum }, "imscDestinationSettings": { "stylePassthrough": enum, "accessibility": enum }, "embeddedDestinationSettings": { "destination608ChannelNumber": integer, "destination708ServiceNumber": integer }, "webvttDestinationSettings": { "stylePassthrough": enum, "accessibility": enum }, "srtDestinationSettings": { "stylePassthrough": enum } }, "customLanguageCode": "string", "languageCode": enum, "languageDescription": "string" } ] }, "tags": { } }

Response bodies

{ "presets": [ { "arn": "string", "createdAt": "string", "lastUpdated": "string", "description": "string", "category": "string", "name": "string", "type": enum, "settings": { "videoDescription": { "fixedAfd": integer, "width": integer, "scalingBehavior": enum, "crop": { "height": integer, "width": integer, "x": integer, "y": integer }, "height": integer, "videoPreprocessors": { "colorCorrector": { "brightness": integer, "colorSpaceConversion": enum, "sampleRangeConversion": enum, "clipLimits": { "minimumYUV": integer, "maximumYUV": integer, "minimumRGBTolerance": integer, "maximumRGBTolerance": integer }, "sdrReferenceWhiteLevel": integer, "contrast": integer, "hue": integer, "saturation": integer, "maxLuminance": integer, "hdr10Metadata": { "redPrimaryX": integer, "redPrimaryY": integer, "greenPrimaryX": integer, "greenPrimaryY": integer, "bluePrimaryX": integer, "bluePrimaryY": integer, "whitePointX": integer, "whitePointY": integer, "maxFrameAverageLightLevel": integer, "maxContentLightLevel": integer, "maxLuminance": integer, "minLuminance": integer }, "hdrToSdrToneMapper": enum }, "deinterlacer": { "algorithm": enum, "mode": enum, "control": enum }, "dolbyVision": { "profile": enum, "l6Mode": enum, "l6Metadata": { "maxCll": integer, "maxFall": integer }, "mapping": enum }, "hdr10Plus": { "masteringMonitorNits": integer, "targetMonitorNits": integer }, "imageInserter": { "insertableImages": [ { "width": integer, "height": integer, "imageX": integer, "imageY": integer, "duration": integer, "fadeIn": integer, "layer": integer, "imageInserterInput": "string", "startTime": "string", "fadeOut": integer, "opacity": integer } ], "sdrReferenceWhiteLevel": integer }, "noiseReducer": { "filter": enum, "filterSettings": { "strength": integer }, "spatialFilterSettings": { "strength": integer, "speed": integer, "postFilterSharpenStrength": integer }, "temporalFilterSettings": { "strength": integer, "speed": integer, "aggressiveMode": integer, "postTemporalSharpening": enum, "postTemporalSharpeningStrength": enum } }, "timecodeBurnin": { "fontSize": integer, "position": enum, "prefix": "string" }, "partnerWatermarking": { "nexguardFileMarkerSettings": { "license": "string", "preset": "string", "payload": integer, "strength": enum } } }, "timecodeInsertion": enum, "antiAlias": enum, "position": { "height": integer, "width": integer, "x": integer, "y": integer }, "sharpness": integer, "codecSettings": { "codec": enum, "av1Settings": { "gopSize": number, "numberBFramesBetweenReferenceFrames": integer, "slices": integer, "bitDepth": enum, "rateControlMode": enum, "qvbrSettings": { "qvbrQualityLevel": integer, "qvbrQualityLevelFineTune": number }, "maxBitrate": integer, "adaptiveQuantization": enum, "spatialAdaptiveQuantization": enum, "framerateControl": enum, "framerateConversionAlgorithm": enum, "framerateNumerator": integer, "framerateDenominator": integer, "filmGrainSynthesis": enum }, "avcIntraSettings": { "avcIntraClass": enum, "avcIntraUhdSettings": { "qualityTuningLevel": enum }, "interlaceMode": enum, "scanTypeConversionMode": enum, "framerateDenominator": integer, "slowPal": enum, "framerateControl": enum, "telecine": enum, "framerateNumerator": integer, "framerateConversionAlgorithm": enum }, "frameCaptureSettings": { "framerateNumerator": integer, "framerateDenominator": integer, "maxCaptures": integer, "quality": integer }, "h264Settings": { "interlaceMode": enum, "scanTypeConversionMode": enum, "parNumerator": integer, "numberReferenceFrames": integer, "syntax": enum, "softness": integer, "framerateDenominator": integer, "gopClosedCadence": integer, "hrdBufferInitialFillPercentage": integer, "gopSize": number, "slices": integer, "gopBReference": enum, "hrdBufferSize": integer, "maxBitrate": integer, "slowPal": enum, "parDenominator": integer, "spatialAdaptiveQuantization": enum, "temporalAdaptiveQuantization": enum, "flickerAdaptiveQuantization": enum, "entropyEncoding": enum, "bitrate": integer, "framerateControl": enum, "rateControlMode": enum, "qvbrSettings": { "qvbrQualityLevel": integer, "qvbrQualityLevelFineTune": number, "maxAverageBitrate": integer }, "codecProfile": enum, "telecine": enum, "framerateNumerator": integer, "minIInterval": integer, "adaptiveQuantization": enum, "saliencyAwareEncoding": enum, "codecLevel": enum, "fieldEncoding": enum, "sceneChangeDetect": enum, "qualityTuningLevel": enum, "framerateConversionAlgorithm": enum, "unregisteredSeiTimecode": enum, "gopSizeUnits": enum, "parControl": enum, "numberBFramesBetweenReferenceFrames": integer, "repeatPps": enum, "dynamicSubGop": enum, "hrdBufferFinalFillPercentage": integer, "bandwidthReductionFilter": { "strength": enum, "sharpening": enum }, "endOfStreamMarkers": enum }, "h265Settings": { "interlaceMode": enum, "scanTypeConversionMode": enum, "parNumerator": integer, "numberReferenceFrames": integer, "framerateDenominator": integer, "gopClosedCadence": integer, "alternateTransferFunctionSei": enum, "hrdBufferInitialFillPercentage": integer, "gopSize": number, "slices": integer, "gopBReference": enum, "hrdBufferSize": integer, "maxBitrate": integer, "slowPal": enum, "parDenominator": integer, "spatialAdaptiveQuantization": enum, "temporalAdaptiveQuantization": enum, "flickerAdaptiveQuantization": enum, "bitrate": integer, "framerateControl": enum, "rateControlMode": enum, "qvbrSettings": { "qvbrQualityLevel": integer, "qvbrQualityLevelFineTune": number, "maxAverageBitrate": integer }, "codecProfile": enum, "tiles": enum, "telecine": enum, "framerateNumerator": integer, "minIInterval": integer, "adaptiveQuantization": enum, "codecLevel": enum, "sceneChangeDetect": enum, "qualityTuningLevel": enum, "framerateConversionAlgorithm": enum, "unregisteredSeiTimecode": enum, "gopSizeUnits": enum, "parControl": enum, "numberBFramesBetweenReferenceFrames": integer, "temporalIds": enum, "sampleAdaptiveOffsetFilterMode": enum, "writeMp4PackagingType": enum, "dynamicSubGop": enum, "hrdBufferFinalFillPercentage": integer, "endOfStreamMarkers": enum, "bandwidthReductionFilter": { "strength": enum, "sharpening": enum } }, "mpeg2Settings": { "interlaceMode": enum, "scanTypeConversionMode": enum, "parNumerator": integer, "syntax": enum, "softness": integer, "framerateDenominator": integer, "gopClosedCadence": integer, "hrdBufferInitialFillPercentage": integer, "gopSize": number, "hrdBufferSize": integer, "maxBitrate": integer, "slowPal": enum, "parDenominator": integer, "spatialAdaptiveQuantization": enum, "temporalAdaptiveQuantization": enum, "bitrate": integer, "intraDcPrecision": enum, "framerateControl": enum, "rateControlMode": enum, "codecProfile": enum, "telecine": enum, "framerateNumerator": integer, "minIInterval": integer, "adaptiveQuantization": enum, "codecLevel": enum, "sceneChangeDetect": enum, "qualityTuningLevel": enum, "framerateConversionAlgorithm": enum, "gopSizeUnits": enum, "parControl": enum, "numberBFramesBetweenReferenceFrames": integer, "dynamicSubGop": enum, "hrdBufferFinalFillPercentage": integer }, "proresSettings": { "interlaceMode": enum, "scanTypeConversionMode": enum, "parNumerator": integer, "framerateDenominator": integer, "codecProfile": enum, "slowPal": enum, "parDenominator": integer, "framerateControl": enum, "telecine": enum, "chromaSampling": enum, "framerateNumerator": integer, "framerateConversionAlgorithm": enum, "parControl": enum }, "uncompressedSettings": { "framerateControl": enum, "framerateConversionAlgorithm": enum, "framerateNumerator": integer, "framerateDenominator": integer, "interlaceMode": enum, "scanTypeConversionMode": enum, "telecine": enum, "slowPal": enum, "fourcc": enum }, "vc3Settings": { "vc3Class": enum, "interlaceMode": enum, "scanTypeConversionMode": enum, "framerateConversionAlgorithm": enum, "telecine": enum, "slowPal": enum, "framerateControl": enum, "framerateDenominator": integer, "framerateNumerator": integer }, "vp8Settings": { "qualityTuningLevel": enum, "rateControlMode": enum, "gopSize": number, "maxBitrate": integer, "bitrate": integer, "hrdBufferSize": integer, "framerateControl": enum, "framerateConversionAlgorithm": enum, "framerateNumerator": integer, "framerateDenominator": integer, "parControl": enum, "parNumerator": integer, "parDenominator": integer }, "vp9Settings": { "qualityTuningLevel": enum, "rateControlMode": enum, "gopSize": number, "maxBitrate": integer, "bitrate": integer, "hrdBufferSize": integer, "framerateControl": enum, "framerateConversionAlgorithm": enum, "framerateNumerator": integer, "framerateDenominator": integer, "parControl": enum, "parNumerator": integer, "parDenominator": integer }, "xavcSettings": { "profile": enum, "xavcHdIntraCbgProfileSettings": { "xavcClass": enum }, "xavc4kIntraCbgProfileSettings": { "xavcClass": enum }, "xavc4kIntraVbrProfileSettings": { "xavcClass": enum }, "xavcHdProfileSettings": { "bitrateClass": enum, "slices": integer, "hrdBufferSize": integer, "qualityTuningLevel": enum, "interlaceMode": enum, "telecine": enum, "gopClosedCadence": integer, "gopBReference": enum, "flickerAdaptiveQuantization": enum }, "xavc4kProfileSettings": { "bitrateClass": enum, "slices": integer, "hrdBufferSize": integer, "codecProfile": enum, "qualityTuningLevel": enum, "gopClosedCadence": integer, "gopBReference": enum, "flickerAdaptiveQuantization": enum }, "softness": integer, "framerateDenominator": integer, "slowPal": enum, "spatialAdaptiveQuantization": enum, "temporalAdaptiveQuantization": enum, "entropyEncoding": enum, "framerateControl": enum, "framerateNumerator": integer, "adaptiveQuantization": enum, "framerateConversionAlgorithm": enum } }, "afdSignaling": enum, "dropFrameTimecode": enum, "respondToAfd": enum, "colorMetadata": enum }, "audioDescriptions": [ { "audioTypeControl": enum, "audioSourceName": "string", "audioNormalizationSettings": { "algorithm": enum, "algorithmControl": enum, "correctionGateLevel": integer, "loudnessLogging": enum, "targetLkfs": number, "peakCalculation": enum, "truePeakLimiterThreshold": number }, "audioChannelTaggingSettings": { "channelTag": enum, "channelTags": [ enum ] }, "codecSettings": { "codec": enum, "aacSettings": { "audioDescriptionBroadcasterMix": enum, "vbrQuality": enum, "bitrate": integer, "rateControlMode": enum, "codecProfile": enum, "codingMode": enum, "rawFormat": enum, "sampleRate": integer, "specification": enum }, "ac3Settings": { "bitrate": integer, "bitstreamMode": enum, "codingMode": enum, "dialnorm": integer, "dynamicRangeCompressionProfile": enum, "dynamicRangeCompressionLine": enum, "dynamicRangeCompressionRf": enum, "metadataControl": enum, "lfeFilter": enum, "sampleRate": integer }, "aiffSettings": { "bitDepth": integer, "channels": integer, "sampleRate": integer }, "eac3Settings": { "metadataControl": enum, "surroundExMode": enum, "loRoSurroundMixLevel": number, "phaseControl": enum, "dialnorm": integer, "ltRtSurroundMixLevel": number, "bitrate": integer, "ltRtCenterMixLevel": number, "passthroughControl": enum, "lfeControl": enum, "loRoCenterMixLevel": number, "attenuationControl": enum, "codingMode": enum, "surroundMode": enum, "bitstreamMode": enum, "lfeFilter": enum, "stereoDownmix": enum, "dynamicRangeCompressionRf": enum, "sampleRate": integer, "dynamicRangeCompressionLine": enum, "dcFilter": enum }, "eac3AtmosSettings": { "surroundExMode": enum, "loRoSurroundMixLevel": number, "ltRtSurroundMixLevel": number, "bitrate": integer, "ltRtCenterMixLevel": number, "loRoCenterMixLevel": number, "codingMode": enum, "bitstreamMode": enum, "stereoDownmix": enum, "dynamicRangeCompressionRf": enum, "sampleRate": integer, "dynamicRangeCompressionLine": enum, "downmixControl": enum, "dynamicRangeControl": enum, "meteringMode": enum, "dialogueIntelligence": enum, "speechThreshold": integer }, "flacSettings": { "bitDepth": integer, "channels": integer, "sampleRate": integer }, "mp2Settings": { "bitrate": integer, "channels": integer, "sampleRate": integer }, "mp3Settings": { "bitrate": integer, "channels": integer, "rateControlMode": enum, "sampleRate": integer, "vbrQuality": integer }, "opusSettings": { "bitrate": integer, "channels": integer, "sampleRate": integer }, "vorbisSettings": { "channels": integer, "sampleRate": integer, "vbrQuality": integer }, "wavSettings": { "bitDepth": integer, "channels": integer, "sampleRate": integer, "format": enum } }, "remixSettings": { "channelMapping": { "outputChannels": [ { "inputChannels": [ integer ], "inputChannelsFineTune": [ number ] } ] }, "channelsIn": integer, "channelsOut": integer, "audioDescriptionAudioChannel": integer, "audioDescriptionDataChannel": integer }, "streamName": "string", "languageCodeControl": enum, "audioType": integer, "customLanguageCode": "string", "languageCode": enum } ], "containerSettings": { "container": enum, "m3u8Settings": { "audioFramesPerPes": integer, "pcrControl": enum, "dataPTSControl": enum, "maxPcrInterval": integer, "pcrPid": integer, "pmtPid": integer, "privateMetadataPid": integer, "programNumber": integer, "patInterval": integer, "pmtInterval": integer, "scte35Source": enum, "scte35Pid": integer, "nielsenId3": enum, "timedMetadata": enum, "timedMetadataPid": integer, "transportStreamId": integer, "videoPid": integer, "ptsOffsetMode": enum, "ptsOffset": integer, "audioPids": [ integer ], "audioDuration": enum }, "f4vSettings": { "moovPlacement": enum }, "m2tsSettings": { "audioBufferModel": enum, "minEbpInterval": integer, "esRateInPes": enum, "patInterval": integer, "dvbNitSettings": { "nitInterval": integer, "networkId": integer, "networkName": "string" }, "dvbSdtSettings": { "outputSdt": enum, "sdtInterval": integer, "serviceName": "string", "serviceProviderName": "string" }, "scte35Source": enum, "scte35Pid": integer, "scte35Esam": { "scte35EsamPid": integer }, "klvMetadata": enum, "videoPid": integer, "dvbTdtSettings": { "tdtInterval": integer }, "pmtInterval": integer, "segmentationStyle": enum, "segmentationTime": number, "pmtPid": integer, "bitrate": integer, "audioPids": [ integer ], "privateMetadataPid": integer, "nielsenId3": enum, "timedMetadataPid": integer, "maxPcrInterval": integer, "transportStreamId": integer, "dvbSubPids": [ integer ], "rateMode": enum, "audioFramesPerPes": integer, "pcrControl": enum, "dataPTSControl": enum, "segmentationMarkers": enum, "ebpAudioInterval": enum, "forceTsVideoEbpOrder": enum, "programNumber": integer, "pcrPid": integer, "bufferModel": enum, "dvbTeletextPid": integer, "fragmentTime": number, "ebpPlacement": enum, "nullPacketBitrate": number, "audioDuration": enum, "ptsOffsetMode": enum, "ptsOffset": integer, "preventBufferUnderflow": enum }, "movSettings": { "clapAtom": enum, "cslgAtom": enum, "paddingControl": enum, "reference": enum, "mpeg2FourCCControl": enum }, "mp4Settings": { "cslgAtom": enum, "cttsVersion": integer, "freeSpaceBox": enum, "mp4MajorBrand": "string", "moovPlacement": enum, "audioDuration": enum }, "mpdSettings": { "accessibilityCaptionHints": enum, "captionContainerType": enum, "scte35Source": enum, "scte35Esam": enum, "audioDuration": enum, "timedMetadata": enum, "timedMetadataBoxVersion": enum, "timedMetadataSchemeIdUri": "string", "timedMetadataValue": "string", "manifestMetadataSignaling": enum, "klvMetadata": enum }, "cmfcSettings": { "scte35Source": enum, "scte35Esam": enum, "audioDuration": enum, "iFrameOnlyManifest": enum, "audioGroupId": "string", "audioRenditionSets": "string", "audioTrackType": enum, "descriptiveVideoServiceFlag": enum, "timedMetadata": enum, "timedMetadataBoxVersion": enum, "timedMetadataSchemeIdUri": "string", "timedMetadataValue": "string", "manifestMetadataSignaling": enum, "klvMetadata": enum }, "mxfSettings": { "afdSignaling": enum, "profile": enum, "xavcProfileSettings": { "durationMode": enum, "maxAncDataSize": integer } } }, "captionDescriptions": [ { "destinationSettings": { "destinationType": enum, "burninDestinationSettings": { "backgroundOpacity": integer, "shadowXOffset": integer, "teletextSpacing": enum, "alignment": enum, "outlineSize": integer, "yPosition": integer, "shadowColor": enum, "fontOpacity": integer, "fontSize": integer, "fontScript": enum, "fallbackFont": enum, "fontFileRegular": "string", "fontFileBold": "string", "fontFileItalic": "string", "fontFileBoldItalic": "string", "fontColor": enum, "hexFontColor": "string", "applyFontColor": enum, "backgroundColor": enum, "fontResolution": integer, "outlineColor": enum, "shadowYOffset": integer, "xPosition": integer, "shadowOpacity": integer, "stylePassthrough": enum }, "dvbSubDestinationSettings": { "backgroundOpacity": integer, "shadowXOffset": integer, "teletextSpacing": enum, "alignment": enum, "outlineSize": integer, "yPosition": integer, "shadowColor": enum, "fontOpacity": integer, "fontSize": integer, "fontScript": enum, "fallbackFont": enum, "fontFileRegular": "string", "fontFileBold": "string", "fontFileItalic": "string", "fontFileBoldItalic": "string", "fontColor": enum, "hexFontColor": "string", "applyFontColor": enum, "backgroundColor": enum, "fontResolution": integer, "outlineColor": enum, "shadowYOffset": integer, "xPosition": integer, "shadowOpacity": integer, "subtitlingType": enum, "ddsHandling": enum, "ddsXCoordinate": integer, "ddsYCoordinate": integer, "width": integer, "height": integer, "stylePassthrough": enum }, "sccDestinationSettings": { "framerate": enum }, "teletextDestinationSettings": { "pageNumber": "string", "pageTypes": [ enum ] }, "ttmlDestinationSettings": { "stylePassthrough": enum }, "imscDestinationSettings": { "stylePassthrough": enum, "accessibility": enum }, "embeddedDestinationSettings": { "destination608ChannelNumber": integer, "destination708ServiceNumber": integer }, "webvttDestinationSettings": { "stylePassthrough": enum, "accessibility": enum }, "srtDestinationSettings": { "stylePassthrough": enum } }, "customLanguageCode": "string", "languageCode": enum, "languageDescription": "string" } ] } } ], "nextToken": "string" }
{ "preset": { "arn": "string", "createdAt": "string", "lastUpdated": "string", "description": "string", "category": "string", "name": "string", "type": enum, "settings": { "videoDescription": { "fixedAfd": integer, "width": integer, "scalingBehavior": enum, "crop": { "height": integer, "width": integer, "x": integer, "y": integer }, "height": integer, "videoPreprocessors": { "colorCorrector": { "brightness": integer, "colorSpaceConversion": enum, "sampleRangeConversion": enum, "clipLimits": { "minimumYUV": integer, "maximumYUV": integer, "minimumRGBTolerance": integer, "maximumRGBTolerance": integer }, "sdrReferenceWhiteLevel": integer, "contrast": integer, "hue": integer, "saturation": integer, "maxLuminance": integer, "hdr10Metadata": { "redPrimaryX": integer, "redPrimaryY": integer, "greenPrimaryX": integer, "greenPrimaryY": integer, "bluePrimaryX": integer, "bluePrimaryY": integer, "whitePointX": integer, "whitePointY": integer, "maxFrameAverageLightLevel": integer, "maxContentLightLevel": integer, "maxLuminance": integer, "minLuminance": integer }, "hdrToSdrToneMapper": enum }, "deinterlacer": { "algorithm": enum, "mode": enum, "control": enum }, "dolbyVision": { "profile": enum, "l6Mode": enum, "l6Metadata": { "maxCll": integer, "maxFall": integer }, "mapping": enum }, "hdr10Plus": { "masteringMonitorNits": integer, "targetMonitorNits": integer }, "imageInserter": { "insertableImages": [ { "width": integer, "height": integer, "imageX": integer, "imageY": integer, "duration": integer, "fadeIn": integer, "layer": integer, "imageInserterInput": "string", "startTime": "string", "fadeOut": integer, "opacity": integer } ], "sdrReferenceWhiteLevel": integer }, "noiseReducer": { "filter": enum, "filterSettings": { "strength": integer }, "spatialFilterSettings": { "strength": integer, "speed": integer, "postFilterSharpenStrength": integer }, "temporalFilterSettings": { "strength": integer, "speed": integer, "aggressiveMode": integer, "postTemporalSharpening": enum, "postTemporalSharpeningStrength": enum } }, "timecodeBurnin": { "fontSize": integer, "position": enum, "prefix": "string" }, "partnerWatermarking": { "nexguardFileMarkerSettings": { "license": "string", "preset": "string", "payload": integer, "strength": enum } } }, "timecodeInsertion": enum, "antiAlias": enum, "position": { "height": integer, "width": integer, "x": integer, "y": integer }, "sharpness": integer, "codecSettings": { "codec": enum, "av1Settings": { "gopSize": number, "numberBFramesBetweenReferenceFrames": integer, "slices": integer, "bitDepth": enum, "rateControlMode": enum, "qvbrSettings": { "qvbrQualityLevel": integer, "qvbrQualityLevelFineTune": number }, "maxBitrate": integer, "adaptiveQuantization": enum, "spatialAdaptiveQuantization": enum, "framerateControl": enum, "framerateConversionAlgorithm": enum, "framerateNumerator": integer, "framerateDenominator": integer, "filmGrainSynthesis": enum }, "avcIntraSettings": { "avcIntraClass": enum, "avcIntraUhdSettings": { "qualityTuningLevel": enum }, "interlaceMode": enum, "scanTypeConversionMode": enum, "framerateDenominator": integer, "slowPal": enum, "framerateControl": enum, "telecine": enum, "framerateNumerator": integer, "framerateConversionAlgorithm": enum }, "frameCaptureSettings": { "framerateNumerator": integer, "framerateDenominator": integer, "maxCaptures": integer, "quality": integer }, "h264Settings": { "interlaceMode": enum, "scanTypeConversionMode": enum, "parNumerator": integer, "numberReferenceFrames": integer, "syntax": enum, "softness": integer, "framerateDenominator": integer, "gopClosedCadence": integer, "hrdBufferInitialFillPercentage": integer, "gopSize": number, "slices": integer, "gopBReference": enum, "hrdBufferSize": integer, "maxBitrate": integer, "slowPal": enum, "parDenominator": integer, "spatialAdaptiveQuantization": enum, "temporalAdaptiveQuantization": enum, "flickerAdaptiveQuantization": enum, "entropyEncoding": enum, "bitrate": integer, "framerateControl": enum, "rateControlMode": enum, "qvbrSettings": { "qvbrQualityLevel": integer, "qvbrQualityLevelFineTune": number, "maxAverageBitrate": integer }, "codecProfile": enum, "telecine": enum, "framerateNumerator": integer, "minIInterval": integer, "adaptiveQuantization": enum, "saliencyAwareEncoding": enum, "codecLevel": enum, "fieldEncoding": enum, "sceneChangeDetect": enum, "qualityTuningLevel": enum, "framerateConversionAlgorithm": enum, "unregisteredSeiTimecode": enum, "gopSizeUnits": enum, "parControl": enum, "numberBFramesBetweenReferenceFrames": integer, "repeatPps": enum, "dynamicSubGop": enum, "hrdBufferFinalFillPercentage": integer, "bandwidthReductionFilter": { "strength": enum, "sharpening": enum }, "endOfStreamMarkers": enum }, "h265Settings": { "interlaceMode": enum, "scanTypeConversionMode": enum, "parNumerator": integer, "numberReferenceFrames": integer, "framerateDenominator": integer, "gopClosedCadence": integer, "alternateTransferFunctionSei": enum, "hrdBufferInitialFillPercentage": integer, "gopSize": number, "slices": integer, "gopBReference": enum, "hrdBufferSize": integer, "maxBitrate": integer, "slowPal": enum, "parDenominator": integer, "spatialAdaptiveQuantization": enum, "temporalAdaptiveQuantization": enum, "flickerAdaptiveQuantization": enum, "bitrate": integer, "framerateControl": enum, "rateControlMode": enum, "qvbrSettings": { "qvbrQualityLevel": integer, "qvbrQualityLevelFineTune": number, "maxAverageBitrate": integer }, "codecProfile": enum, "tiles": enum, "telecine": enum, "framerateNumerator": integer, "minIInterval": integer, "adaptiveQuantization": enum, "codecLevel": enum, "sceneChangeDetect": enum, "qualityTuningLevel": enum, "framerateConversionAlgorithm": enum, "unregisteredSeiTimecode": enum, "gopSizeUnits": enum, "parControl": enum, "numberBFramesBetweenReferenceFrames": integer, "temporalIds": enum, "sampleAdaptiveOffsetFilterMode": enum, "writeMp4PackagingType": enum, "dynamicSubGop": enum, "hrdBufferFinalFillPercentage": integer, "endOfStreamMarkers": enum, "bandwidthReductionFilter": { "strength": enum, "sharpening": enum } }, "mpeg2Settings": { "interlaceMode": enum, "scanTypeConversionMode": enum, "parNumerator": integer, "syntax": enum, "softness": integer, "framerateDenominator": integer, "gopClosedCadence": integer, "hrdBufferInitialFillPercentage": integer, "gopSize": number, "hrdBufferSize": integer, "maxBitrate": integer, "slowPal": enum, "parDenominator": integer, "spatialAdaptiveQuantization": enum, "temporalAdaptiveQuantization": enum, "bitrate": integer, "intraDcPrecision": enum, "framerateControl": enum, "rateControlMode": enum, "codecProfile": enum, "telecine": enum, "framerateNumerator": integer, "minIInterval": integer, "adaptiveQuantization": enum, "codecLevel": enum, "sceneChangeDetect": enum, "qualityTuningLevel": enum, "framerateConversionAlgorithm": enum, "gopSizeUnits": enum, "parControl": enum, "numberBFramesBetweenReferenceFrames": integer, "dynamicSubGop": enum, "hrdBufferFinalFillPercentage": integer }, "proresSettings": { "interlaceMode": enum, "scanTypeConversionMode": enum, "parNumerator": integer, "framerateDenominator": integer, "codecProfile": enum, "slowPal": enum, "parDenominator": integer, "framerateControl": enum, "telecine": enum, "chromaSampling": enum, "framerateNumerator": integer, "framerateConversionAlgorithm": enum, "parControl": enum }, "uncompressedSettings": { "framerateControl": enum, "framerateConversionAlgorithm": enum, "framerateNumerator": integer, "framerateDenominator": integer, "interlaceMode": enum, "scanTypeConversionMode": enum, "telecine": enum, "slowPal": enum, "fourcc": enum }, "vc3Settings": { "vc3Class": enum, "interlaceMode": enum, "scanTypeConversionMode": enum, "framerateConversionAlgorithm": enum, "telecine": enum, "slowPal": enum, "framerateControl": enum, "framerateDenominator": integer, "framerateNumerator": integer }, "vp8Settings": { "qualityTuningLevel": enum, "rateControlMode": enum, "gopSize": number, "maxBitrate": integer, "bitrate": integer, "hrdBufferSize": integer, "framerateControl": enum, "framerateConversionAlgorithm": enum, "framerateNumerator": integer, "framerateDenominator": integer, "parControl": enum, "parNumerator": integer, "parDenominator": integer }, "vp9Settings": { "qualityTuningLevel": enum, "rateControlMode": enum, "gopSize": number, "maxBitrate": integer, "bitrate": integer, "hrdBufferSize": integer, "framerateControl": enum, "framerateConversionAlgorithm": enum, "framerateNumerator": integer, "framerateDenominator": integer, "parControl": enum, "parNumerator": integer, "parDenominator": integer }, "xavcSettings": { "profile": enum, "xavcHdIntraCbgProfileSettings": { "xavcClass": enum }, "xavc4kIntraCbgProfileSettings": { "xavcClass": enum }, "xavc4kIntraVbrProfileSettings": { "xavcClass": enum }, "xavcHdProfileSettings": { "bitrateClass": enum, "slices": integer, "hrdBufferSize": integer, "qualityTuningLevel": enum, "interlaceMode": enum, "telecine": enum, "gopClosedCadence": integer, "gopBReference": enum, "flickerAdaptiveQuantization": enum }, "xavc4kProfileSettings": { "bitrateClass": enum, "slices": integer, "hrdBufferSize": integer, "codecProfile": enum, "qualityTuningLevel": enum, "gopClosedCadence": integer, "gopBReference": enum, "flickerAdaptiveQuantization": enum }, "softness": integer, "framerateDenominator": integer, "slowPal": enum, "spatialAdaptiveQuantization": enum, "temporalAdaptiveQuantization": enum, "entropyEncoding": enum, "framerateControl": enum, "framerateNumerator": integer, "adaptiveQuantization": enum, "framerateConversionAlgorithm": enum } }, "afdSignaling": enum, "dropFrameTimecode": enum, "respondToAfd": enum, "colorMetadata": enum }, "audioDescriptions": [ { "audioTypeControl": enum, "audioSourceName": "string", "audioNormalizationSettings": { "algorithm": enum, "algorithmControl": enum, "correctionGateLevel": integer, "loudnessLogging": enum, "targetLkfs": number, "peakCalculation": enum, "truePeakLimiterThreshold": number }, "audioChannelTaggingSettings": { "channelTag": enum, "channelTags": [ enum ] }, "codecSettings": { "codec": enum, "aacSettings": { "audioDescriptionBroadcasterMix": enum, "vbrQuality": enum, "bitrate": integer, "rateControlMode": enum, "codecProfile": enum, "codingMode": enum, "rawFormat": enum, "sampleRate": integer, "specification": enum }, "ac3Settings": { "bitrate": integer, "bitstreamMode": enum, "codingMode": enum, "dialnorm": integer, "dynamicRangeCompressionProfile": enum, "dynamicRangeCompressionLine": enum, "dynamicRangeCompressionRf": enum, "metadataControl": enum, "lfeFilter": enum, "sampleRate": integer }, "aiffSettings": { "bitDepth": integer, "channels": integer, "sampleRate": integer }, "eac3Settings": { "metadataControl": enum, "surroundExMode": enum, "loRoSurroundMixLevel": number, "phaseControl": enum, "dialnorm": integer, "ltRtSurroundMixLevel": number, "bitrate": integer, "ltRtCenterMixLevel": number, "passthroughControl": enum, "lfeControl": enum, "loRoCenterMixLevel": number, "attenuationControl": enum, "codingMode": enum, "surroundMode": enum, "bitstreamMode": enum, "lfeFilter": enum, "stereoDownmix": enum, "dynamicRangeCompressionRf": enum, "sampleRate": integer, "dynamicRangeCompressionLine": enum, "dcFilter": enum }, "eac3AtmosSettings": { "surroundExMode": enum, "loRoSurroundMixLevel": number, "ltRtSurroundMixLevel": number, "bitrate": integer, "ltRtCenterMixLevel": number, "loRoCenterMixLevel": number, "codingMode": enum, "bitstreamMode": enum, "stereoDownmix": enum, "dynamicRangeCompressionRf": enum, "sampleRate": integer, "dynamicRangeCompressionLine": enum, "downmixControl": enum, "dynamicRangeControl": enum, "meteringMode": enum, "dialogueIntelligence": enum, "speechThreshold": integer }, "flacSettings": { "bitDepth": integer, "channels": integer, "sampleRate": integer }, "mp2Settings": { "bitrate": integer, "channels": integer, "sampleRate": integer }, "mp3Settings": { "bitrate": integer, "channels": integer, "rateControlMode": enum, "sampleRate": integer, "vbrQuality": integer }, "opusSettings": { "bitrate": integer, "channels": integer, "sampleRate": integer }, "vorbisSettings": { "channels": integer, "sampleRate": integer, "vbrQuality": integer }, "wavSettings": { "bitDepth": integer, "channels": integer, "sampleRate": integer, "format": enum } }, "remixSettings": { "channelMapping": { "outputChannels": [ { "inputChannels": [ integer ], "inputChannelsFineTune": [ number ] } ] }, "channelsIn": integer, "channelsOut": integer, "audioDescriptionAudioChannel": integer, "audioDescriptionDataChannel": integer }, "streamName": "string", "languageCodeControl": enum, "audioType": integer, "customLanguageCode": "string", "languageCode": enum } ], "containerSettings": { "container": enum, "m3u8Settings": { "audioFramesPerPes": integer, "pcrControl": enum, "dataPTSControl": enum, "maxPcrInterval": integer, "pcrPid": integer, "pmtPid": integer, "privateMetadataPid": integer, "programNumber": integer, "patInterval": integer, "pmtInterval": integer, "scte35Source": enum, "scte35Pid": integer, "nielsenId3": enum, "timedMetadata": enum, "timedMetadataPid": integer, "transportStreamId": integer, "videoPid": integer, "ptsOffsetMode": enum, "ptsOffset": integer, "audioPids": [ integer ], "audioDuration": enum }, "f4vSettings": { "moovPlacement": enum }, "m2tsSettings": { "audioBufferModel": enum, "minEbpInterval": integer, "esRateInPes": enum, "patInterval": integer, "dvbNitSettings": { "nitInterval": integer, "networkId": integer, "networkName": "string" }, "dvbSdtSettings": { "outputSdt": enum, "sdtInterval": integer, "serviceName": "string", "serviceProviderName": "string" }, "scte35Source": enum, "scte35Pid": integer, "scte35Esam": { "scte35EsamPid": integer }, "klvMetadata": enum, "videoPid": integer, "dvbTdtSettings": { "tdtInterval": integer }, "pmtInterval": integer, "segmentationStyle": enum, "segmentationTime": number, "pmtPid": integer, "bitrate": integer, "audioPids": [ integer ], "privateMetadataPid": integer, "nielsenId3": enum, "timedMetadataPid": integer, "maxPcrInterval": integer, "transportStreamId": integer, "dvbSubPids": [ integer ], "rateMode": enum, "audioFramesPerPes": integer, "pcrControl": enum, "dataPTSControl": enum, "segmentationMarkers": enum, "ebpAudioInterval": enum, "forceTsVideoEbpOrder": enum, "programNumber": integer, "pcrPid": integer, "bufferModel": enum, "dvbTeletextPid": integer, "fragmentTime": number, "ebpPlacement": enum, "nullPacketBitrate": number, "audioDuration": enum, "ptsOffsetMode": enum, "ptsOffset": integer, "preventBufferUnderflow": enum }, "movSettings": { "clapAtom": enum, "cslgAtom": enum, "paddingControl": enum, "reference": enum, "mpeg2FourCCControl": enum }, "mp4Settings": { "cslgAtom": enum, "cttsVersion": integer, "freeSpaceBox": enum, "mp4MajorBrand": "string", "moovPlacement": enum, "audioDuration": enum }, "mpdSettings": { "accessibilityCaptionHints": enum, "captionContainerType": enum, "scte35Source": enum, "scte35Esam": enum, "audioDuration": enum, "timedMetadata": enum, "timedMetadataBoxVersion": enum, "timedMetadataSchemeIdUri": "string", "timedMetadataValue": "string", "manifestMetadataSignaling": enum, "klvMetadata": enum }, "cmfcSettings": { "scte35Source": enum, "scte35Esam": enum, "audioDuration": enum, "iFrameOnlyManifest": enum, "audioGroupId": "string", "audioRenditionSets": "string", "audioTrackType": enum, "descriptiveVideoServiceFlag": enum, "timedMetadata": enum, "timedMetadataBoxVersion": enum, "timedMetadataSchemeIdUri": "string", "timedMetadataValue": "string", "manifestMetadataSignaling": enum, "klvMetadata": enum }, "mxfSettings": { "afdSignaling": enum, "profile": enum, "xavcProfileSettings": { "durationMode": enum, "maxAncDataSize": integer } } }, "captionDescriptions": [ { "destinationSettings": { "destinationType": enum, "burninDestinationSettings": { "backgroundOpacity": integer, "shadowXOffset": integer, "teletextSpacing": enum, "alignment": enum, "outlineSize": integer, "yPosition": integer, "shadowColor": enum, "fontOpacity": integer, "fontSize": integer, "fontScript": enum, "fallbackFont": enum, "fontFileRegular": "string", "fontFileBold": "string", "fontFileItalic": "string", "fontFileBoldItalic": "string", "fontColor": enum, "hexFontColor": "string", "applyFontColor": enum, "backgroundColor": enum, "fontResolution": integer, "outlineColor": enum, "shadowYOffset": integer, "xPosition": integer, "shadowOpacity": integer, "stylePassthrough": enum }, "dvbSubDestinationSettings": { "backgroundOpacity": integer, "shadowXOffset": integer, "teletextSpacing": enum, "alignment": enum, "outlineSize": integer, "yPosition": integer, "shadowColor": enum, "fontOpacity": integer, "fontSize": integer, "fontScript": enum, "fallbackFont": enum, "fontFileRegular": "string", "fontFileBold": "string", "fontFileItalic": "string", "fontFileBoldItalic": "string", "fontColor": enum, "hexFontColor": "string", "applyFontColor": enum, "backgroundColor": enum, "fontResolution": integer, "outlineColor": enum, "shadowYOffset": integer, "xPosition": integer, "shadowOpacity": integer, "subtitlingType": enum, "ddsHandling": enum, "ddsXCoordinate": integer, "ddsYCoordinate": integer, "width": integer, "height": integer, "stylePassthrough": enum }, "sccDestinationSettings": { "framerate": enum }, "teletextDestinationSettings": { "pageNumber": "string", "pageTypes": [ enum ] }, "ttmlDestinationSettings": { "stylePassthrough": enum }, "imscDestinationSettings": { "stylePassthrough": enum, "accessibility": enum }, "embeddedDestinationSettings": { "destination608ChannelNumber": integer, "destination708ServiceNumber": integer }, "webvttDestinationSettings": { "stylePassthrough": enum, "accessibility": enum }, "srtDestinationSettings": { "stylePassthrough": enum } }, "customLanguageCode": "string", "languageCode": enum, "languageDescription": "string" } ] } } }
{ "message": "string" }

Properties

AacAudioDescriptionBroadcasterMix

Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.

  • BROADCASTER_MIXED_AD

  • NORMAL

AacCodecProfile

Specify the AAC profile. For the widest player compatibility and where higher bitrates are acceptable: Keep the default profile, LC (AAC-LC) For improved audio performance at lower bitrates: Choose HEV1 or HEV2. HEV1 (AAC-HE v1) adds spectral band replication to improve speech audio at low bitrates. HEV2 (AAC-HE v2) adds parametric stereo, which optimizes for encoding stereo audio at very low bitrates.

  • LC

  • HEV1

  • HEV2

AacCodingMode

The Coding mode that you specify determines the number of audio channels and the audio channel layout metadata in your AAC output. Valid coding modes depend on the Rate control mode and Profile that you select. The following list shows the number of audio channels and channel layout for each coding mode. * 1.0 Audio Description (Receiver Mix): One channel, C. Includes audio description data from your stereo input. For more information see ETSI TS 101 154 Annex E. * 1.0 Mono: One channel, C. * 2.0 Stereo: Two channels, L, R. * 5.1 Surround: Six channels, C, L, R, Ls, Rs, LFE.

  • AD_RECEIVER_MIX

  • CODING_MODE_1_0

  • CODING_MODE_1_1

  • CODING_MODE_2_0

  • CODING_MODE_5_1

AacRateControlMode

Specify the AAC rate control mode. For a constant bitrate: Choose CBR. Your AAC output bitrate will be equal to the value that you choose for Bitrate. For a variable bitrate: Choose VBR. Your AAC output bitrate will vary according to your audio content and the value that you choose for Bitrate quality.

  • CBR

  • VBR

AacRawFormat

Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.

  • LATM_LOAS

  • NONE

AacSettings

Required when you set Codec to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality. In CBR mode, you use the setting Bitrate. Defaults and valid values depend on the rate control mode.

PropertyTypeRequiredDescription
audioDescriptionBroadcasterMix

AacAudioDescriptionBroadcasterMix

False

Choose BROADCASTER_MIXED_AD when the input contains pre-mixed main audio + audio description (AD) as a stereo pair. The value for AudioType will be set to 3, which signals to downstream systems that this stream contains "broadcaster mixed AD". Note that the input received by the encoder must contain pre-mixed audio; the encoder does not perform the mixing. When you choose BROADCASTER_MIXED_AD, the encoder ignores any values you provide in AudioType and FollowInputAudioType. Choose NORMAL when the input does not contain pre-mixed audio + audio description (AD). In this case, the encoder will use any values you provide for AudioType and FollowInputAudioType.

bitrate

integer

Minimum: 6000

Maximum: 1024000

False

Specify the average bitrate in bits per second. The set of valid values for this setting is: 6000, 8000, 10000, 12000, 14000, 16000, 20000, 24000, 28000, 32000, 40000, 48000, 56000, 64000, 80000, 96000, 112000, 128000, 160000, 192000, 224000, 256000, 288000, 320000, 384000, 448000, 512000, 576000, 640000, 768000, 896000, 1024000. The value you set is also constrained by the values that you choose for Profile, Bitrate control mode, and Sample rate. Default values depend on Bitrate control mode and Profile.

codecProfile

AacCodecProfile

False

Specify the AAC profile. For the widest player compatibility and where higher bitrates are acceptable: Keep the default profile, LC (AAC-LC) For improved audio performance at lower bitrates: Choose HEV1 or HEV2. HEV1 (AAC-HE v1) adds spectral band replication to improve speech audio at low bitrates. HEV2 (AAC-HE v2) adds parametric stereo, which optimizes for encoding stereo audio at very low bitrates.

codingMode

AacCodingMode

False

The Coding mode that you specify determines the number of audio channels and the audio channel layout metadata in your AAC output. Valid coding modes depend on the Rate control mode and Profile that you select. The following list shows the number of audio channels and channel layout for each coding mode. * 1.0 Audio Description (Receiver Mix): One channel, C. Includes audio description data from your stereo input. For more information see ETSI TS 101 154 Annex E. * 1.0 Mono: One channel, C. * 2.0 Stereo: Two channels, L, R. * 5.1 Surround: Six channels, C, L, R, Ls, Rs, LFE.

rateControlMode

AacRateControlMode

False

Specify the AAC rate control mode. For a constant bitrate: Choose CBR. Your AAC output bitrate will be equal to the value that you choose for Bitrate. For a variable bitrate: Choose VBR. Your AAC output bitrate will vary according to your audio content and the value that you choose for Bitrate quality.

rawFormat

AacRawFormat

False

Enables LATM/LOAS AAC output. Note that if you use LATM/LOAS AAC in an output, you must choose "No container" for the output container.

sampleRate

integer

Minimum: 8000

Maximum: 96000

False

Specify the AAC sample rate in samples per second (Hz). Valid sample rates depend on the AAC profile and Coding mode that you select. For a list of supported sample rates, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/aac-support.html

specification

AacSpecification

False

Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.

vbrQuality

AacVbrQuality

False

Specify the quality of your variable bitrate (VBR) AAC audio. For a list of approximate VBR bitrates, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/aac-support.html#aac_vbr

AacSpecification

Use MPEG-2 AAC instead of MPEG-4 AAC audio for raw or MPEG-2 Transport Stream containers.

  • MPEG2

  • MPEG4

AacVbrQuality

Specify the quality of your variable bitrate (VBR) AAC audio. For a list of approximate VBR bitrates, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/aac-support.html#aac_vbr

  • LOW

  • MEDIUM_LOW

  • MEDIUM_HIGH

  • HIGH

Ac3BitstreamMode

Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).

  • COMPLETE_MAIN

  • COMMENTARY

  • DIALOGUE

  • EMERGENCY

  • HEARING_IMPAIRED

  • MUSIC_AND_EFFECTS

  • VISUALLY_IMPAIRED

  • VOICE_OVER

Ac3CodingMode

Dolby Digital coding mode. Determines number of channels.

  • CODING_MODE_1_0

  • CODING_MODE_1_1

  • CODING_MODE_2_0

  • CODING_MODE_3_2_LFE

Ac3DynamicRangeCompressionLine

Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile. For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

  • FILM_STANDARD

  • FILM_LIGHT

  • MUSIC_STANDARD

  • MUSIC_LIGHT

  • SPEECH

  • NONE

Ac3DynamicRangeCompressionProfile

When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile. The mode-specific settings are Dynamic range compression profile, line mode and Dynamic range compression profile, RF mode. Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None to leave out DRC signaling. Keep the default Film standard to set the profile to Dolby's film standard profile for all operating modes.

  • FILM_STANDARD

  • NONE

Ac3DynamicRangeCompressionRf

Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile. For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

  • FILM_STANDARD

  • FILM_LIGHT

  • MUSIC_STANDARD

  • MUSIC_LIGHT

  • SPEECH

  • NONE

Ac3LfeFilter

Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.

  • ENABLED

  • DISABLED

Ac3MetadataControl

When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.

  • FOLLOW_INPUT

  • USE_CONFIGURED

Ac3Settings

Required when you set Codec to the value AC3.

PropertyTypeRequiredDescription
bitrate

integer

Minimum: 64000

Maximum: 640000

False

Specify the average bitrate in bits per second. The bitrate that you specify must be a multiple of 8000 within the allowed minimum and maximum values. Leave blank to use the default bitrate for the coding mode you select according ETSI TS 102 366. Valid bitrates for coding mode 1/0: Default: 96000. Minimum: 64000. Maximum: 128000. Valid bitrates for coding mode 1/1: Default: 192000. Minimum: 128000. Maximum: 384000. Valid bitrates for coding mode 2/0: Default: 192000. Minimum: 128000. Maximum: 384000. Valid bitrates for coding mode 3/2 with FLE: Default: 384000. Minimum: 384000. Maximum: 640000.

bitstreamMode

Ac3BitstreamMode

False

Specify the bitstream mode for the AC-3 stream that the encoder emits. For more information about the AC3 bitstream mode, see ATSC A/52-2012 (Annex E).

codingMode

Ac3CodingMode

False

Dolby Digital coding mode. Determines number of channels.

dialnorm

integer

Minimum: 1

Maximum: 31

False

Sets the dialnorm for the output. If blank and input audio is Dolby Digital, dialnorm will be passed through.

dynamicRangeCompressionLine

Ac3DynamicRangeCompressionLine

False

Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile. For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

dynamicRangeCompressionProfile

Ac3DynamicRangeCompressionProfile

False

When you want to add Dolby dynamic range compression (DRC) signaling to your output stream, we recommend that you use the mode-specific settings instead of Dynamic range compression profile. The mode-specific settings are Dynamic range compression profile, line mode and Dynamic range compression profile, RF mode. Note that when you specify values for all three settings, MediaConvert ignores the value of this setting in favor of the mode-specific settings. If you do use this setting instead of the mode-specific settings, choose None to leave out DRC signaling. Keep the default Film standard to set the profile to Dolby's film standard profile for all operating modes.

dynamicRangeCompressionRf

Ac3DynamicRangeCompressionRf

False

Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile. For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

lfeFilter

Ac3LfeFilter

False

Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.

metadataControl

Ac3MetadataControl

False

When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.

sampleRate

integer

Minimum: 48000

Maximum: 48000

False

This value is always 48000. It represents the sample rate in Hz.

AfdSignaling

This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.

  • NONE

  • AUTO

  • FIXED

AiffSettings

Required when you set Codec to the value AIFF.

PropertyTypeRequiredDescription
bitDepth

integer

Minimum: 16

Maximum: 24

False

Specify Bit depth, in bits per sample, to choose the encoding quality for this audio track.

channels

integer

Minimum: 1

Maximum: 64

False

Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.

sampleRate

integer

Minimum: 8000

Maximum: 192000

False

Sample rate in Hz.

AntiAlias

The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.

  • DISABLED

  • ENABLED

AudioChannelTag

Specify the QuickTime audio channel layout tags for the audio channels in this audio track. Enter channel layout tags in the same order as your output's audio channel order. For example, if your output audio track has a left and a right channel, enter Left (L) for the first channel and Right (R) for the second. If your output has multiple single-channel audio tracks, enter a single channel layout tag for each track.

  • L

  • R

  • C

  • LFE

  • LS

  • RS

  • LC

  • RC

  • CS

  • LSD

  • RSD

  • TCS

  • VHL

  • VHC

  • VHR

  • TBL

  • TBC

  • TBR

  • RSL

  • RSR

  • LW

  • RW

  • LFE2

  • LT

  • RT

  • HI

  • NAR

  • M

AudioChannelTaggingSettings

Specify the QuickTime audio channel layout tags for the audio channels in this audio track. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use Audio layout tagging, your output must be in a QuickTime (MOV) container and your audio codec must be AAC, WAV, or AIFF.

PropertyTypeRequiredDescription
channelTag

AudioChannelTag

False

Specify the QuickTime audio channel layout tags for the audio channels in this audio track. Enter channel layout tags in the same order as your output's audio channel order. For example, if your output audio track has a left and a right channel, enter Left (L) for the first channel and Right (R) for the second. If your output has multiple single-channel audio tracks, enter a single channel layout tag for each track.

channelTags

Array of type AudioChannelTag

False

Specify the QuickTime audio channel layout tags for the audio channels in this audio track. Enter channel layout tags in the same order as your output's audio channel order. For example, if your output audio track has a left and a right channel, enter Left (L) for the first channel and Right (R) for the second. If your output has multiple single-channel audio tracks, enter a single channel layout tag for each track.

AudioCodec

Choose the audio codec for this output. Note that the option Dolby Digital passthrough applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output

  • AAC

  • MP2

  • MP3

  • WAV

  • AIFF

  • AC3

  • EAC3

  • EAC3_ATMOS

  • VORBIS

  • OPUS

  • PASSTHROUGH

  • FLAC

AudioCodecSettings

Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.

PropertyTypeRequiredDescription
aacSettings

AacSettings

False

Required when you set Codec to the value AAC. The service accepts one of two mutually exclusive groups of AAC settings--VBR and CBR. To select one of these modes, set the value of Bitrate control mode to "VBR" or "CBR". In VBR mode, you control the audio quality with the setting VBR quality. In CBR mode, you use the setting Bitrate. Defaults and valid values depend on the rate control mode.

ac3Settings

Ac3Settings

False

Required when you set Codec to the value AC3.

aiffSettings

AiffSettings

False

Required when you set Codec to the value AIFF.

codec

AudioCodec

False

Choose the audio codec for this output. Note that the option Dolby Digital passthrough applies only to Dolby Digital and Dolby Digital Plus audio inputs. Make sure that you choose a codec that's supported with your output container: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#reference-codecs-containers-output-audio For audio-only outputs, make sure that both your input audio codec and your output audio codec are supported for audio-only workflows. For more information, see: https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers-input.html#reference-codecs-containers-input-audio-only and https://docs.aws.amazon.com/mediaconvert/latest/ug/reference-codecs-containers.html#audio-only-output

eac3AtmosSettings

Eac3AtmosSettings

False

Required when you set Codec to the value EAC3_ATMOS.

eac3Settings

Eac3Settings

False

Required when you set Codec to the value EAC3.

flacSettings

FlacSettings

False

Required when you set Codec, under AudioDescriptions>CodecSettings, to the value FLAC.

mp2Settings

Mp2Settings

False

Required when you set Codec to the value MP2.

mp3Settings

Mp3Settings

False

Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.

opusSettings

OpusSettings

False

Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.

vorbisSettings

VorbisSettings

False

Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.

wavSettings

WavSettings

False

Required when you set Codec to the value WAV.

AudioDescription

Settings related to one audio tab on the MediaConvert console. In your job JSON, an instance of AudioDescription is equivalent to one audio tab in the console. Usually, one audio tab corresponds to one output audio track. Depending on how you set up your input audio selectors and whether you use audio selector groups, one audio tab can correspond to a group of output audio tracks.

PropertyTypeRequiredDescription
audioChannelTaggingSettings

AudioChannelTaggingSettings

False

Specify the QuickTime audio channel layout tags for the audio channels in this audio track. When you don't specify a value, MediaConvert labels your track as Center (C) by default. To use Audio layout tagging, your output must be in a QuickTime (MOV) container and your audio codec must be AAC, WAV, or AIFF.

audioNormalizationSettings

AudioNormalizationSettings

False

Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.

audioSourceName

string

False

Specifies which audio data to use from each input. In the simplest case, specify an "Audio Selector":#inputs-audio_selector by name based on its order within each input. For example if you specify "Audio Selector 3", then the third audio selector will be used from each input. If an input does not have an "Audio Selector 3", then the audio selector marked as "default" in that input will be used. If there is no audio selector marked as "default", silence will be inserted for the duration of that input. Alternatively, an "Audio Selector Group":#inputs-audio_selector_group name may be specified, with similar default/silence behavior. If no audio_source_name is specified, then "Audio Selector 1" will be chosen automatically.

audioType

integer

Minimum: 0

Maximum: 255

False

Applies only if Follow Input Audio Type is unchecked (false). A number between 0 and 255. The following are defined in ISO-IEC 13818-1: 0 = Undefined, 1 = Clean Effects, 2 = Hearing Impaired, 3 = Visually Impaired Commentary, 4-255 = Reserved.

audioTypeControl

AudioTypeControl

False

When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.

codecSettings

AudioCodecSettings

False

Settings related to audio encoding. The settings in this group vary depending on the value that you choose for your audio codec.

customLanguageCode

string

Pattern: ^[A-Za-z]{2,3}(-[A-Za-z0-9-]+)?$

False

Specify the language for this audio output track. The service puts this language code into your output audio track when you set Language code control to Use configured. The service also uses your specified custom language code when you set Language code control to Follow input, but your input file doesn't specify a language code. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.

languageCode

LanguageCode

False

Indicates the language of the audio output track. The ISO 639 language specified in the 'Language Code' drop down will be used when 'Follow Input Language Code' is not selected or when 'Follow Input Language Code' is selected but there is no ISO 639 language code specified by the input.

languageCodeControl

AudioLanguageCodeControl

False

Specify which source for language code takes precedence for this audio track. When you choose Follow input, the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code. When you choose Use configured, the service uses the language code that you specify.

remixSettings

RemixSettings

False

Advanced audio remixing settings.

streamName

string

Pattern: ^[\w\s]*$

False

Specify a label for this output audio stream. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.

AudioLanguageCodeControl

Specify which source for language code takes precedence for this audio track. When you choose Follow input, the service uses the language code from the input track if it's present. If there's no languge code on the input track, the service uses the code that you specify in the setting Language code. When you choose Use configured, the service uses the language code that you specify.

  • FOLLOW_INPUT

  • USE_CONFIGURED

AudioNormalizationAlgorithm

Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.

  • ITU_BS_1770_1

  • ITU_BS_1770_2

  • ITU_BS_1770_3

  • ITU_BS_1770_4

AudioNormalizationAlgorithmControl

When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.

  • CORRECT_AUDIO

  • MEASURE_ONLY

AudioNormalizationLoudnessLogging

If set to LOG, log each output's audio track loudness to a CSV file.

  • LOG

  • DONT_LOG

AudioNormalizationPeakCalculation

If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.

  • TRUE_PEAK

  • NONE

AudioNormalizationSettings

Advanced audio normalization settings. Ignore these settings unless you need to comply with a loudness standard.

PropertyTypeRequiredDescription
algorithm

AudioNormalizationAlgorithm

False

Choose one of the following audio normalization algorithms: ITU-R BS.1770-1: Ungated loudness. A measurement of ungated average loudness for an entire piece of content, suitable for measurement of short-form content under ATSC recommendation A/85. Supports up to 5.1 audio channels. ITU-R BS.1770-2: Gated loudness. A measurement of gated average loudness compliant with the requirements of EBU-R128. Supports up to 5.1 audio channels. ITU-R BS.1770-3: Modified peak. The same loudness measurement algorithm as 1770-2, with an updated true peak measurement. ITU-R BS.1770-4: Higher channel count. Allows for more audio channels than the other algorithms, including configurations such as 7.1.

algorithmControl

AudioNormalizationAlgorithmControl

False

When enabled the output audio is corrected using the chosen algorithm. If disabled, the audio will be measured but not adjusted.

correctionGateLevel

integer

Minimum: -70

Maximum: 0

False

Content measuring above this level will be corrected to the target level. Content measuring below this level will not be corrected.

loudnessLogging

AudioNormalizationLoudnessLogging

False

If set to LOG, log each output's audio track loudness to a CSV file.

peakCalculation

AudioNormalizationPeakCalculation

False

If set to TRUE_PEAK, calculate and log the TruePeak for each output's audio track loudness.

targetLkfs

number

Format: float

Minimum: -59.0

Maximum: 0.0

False

When you use Audio normalization, optionally use this setting to specify a target loudness. If you don't specify a value here, the encoder chooses a value for you, based on the algorithm that you choose for Algorithm. If you choose algorithm 1770-1, the encoder will choose -24 LKFS; otherwise, the encoder will choose -23 LKFS.

truePeakLimiterThreshold

number

Format: float

Minimum: -8.0

Maximum: 0.0

False

Specify the True-peak limiter threshold in decibels relative to full scale (dBFS). The peak inter-audio sample loudness in your output will be limited to the value that you specify, without affecting the overall target LKFS. Enter a value from 0 to -8. Leave blank to use the default value 0.

AudioTypeControl

When set to FOLLOW_INPUT, if the input contains an ISO 639 audio_type, then that value is passed through to the output. If the input contains no ISO 639 audio_type, the value in Audio Type is included in the output. Otherwise the value in Audio Type is included in the output. Note that this field and audioType are both ignored if audioDescriptionBroadcasterMix is set to BROADCASTER_MIXED_AD.

  • FOLLOW_INPUT

  • USE_CONFIGURED

Av1AdaptiveQuantization

Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization.

  • OFF

  • LOW

  • MEDIUM

  • HIGH

  • HIGHER

  • MAX

Av1BitDepth

Specify the Bit depth. You can choose 8-bit or 10-bit.

  • BIT_8

  • BIT_10

Av1FilmGrainSynthesis

Film grain synthesis replaces film grain present in your content with similar quality synthesized AV1 film grain. We recommend that you choose Enabled to reduce the bandwidth of your QVBR quality level 5, 6, 7, or 8 outputs. For QVBR quality level 9 or 10 outputs we recommend that you keep the default value, Disabled. When you include Film grain synthesis, you cannot include the Noise reducer preprocessor.

  • DISABLED

  • ENABLED

Av1FramerateControl

Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

Av1FramerateConversionAlgorithm

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

  • DUPLICATE_DROP

  • INTERPOLATE

  • FRAMEFORMER

Av1QvbrSettings

Settings for quality-defined variable bitrate encoding with the AV1 codec. Use these settings only when you set QVBR for Rate control mode.

PropertyTypeRequiredDescription
qvbrQualityLevel

integer

Minimum: 1

Maximum: 10

False

Use this setting only when you set Rate control mode to QVBR. Specify the target quality level for this output. MediaConvert determines the right number of bits to use for each part of the video to maintain the video quality that you specify. When you keep the default value, AUTO, MediaConvert picks a quality level for you, based on characteristics of your input video. If you prefer to specify a quality level, specify a number from 1 through 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.

qvbrQualityLevelFineTune

number

Format: float

Minimum: 0.0

Maximum: 1.0

False

Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.

Av1RateControlMode

'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'

  • QVBR

Av1Settings

Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.

PropertyTypeRequiredDescription
adaptiveQuantization

Av1AdaptiveQuantization

False

Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to Spatial adaptive quantization.

bitDepth

Av1BitDepth

False

Specify the Bit depth. You can choose 8-bit or 10-bit.

filmGrainSynthesis

Av1FilmGrainSynthesis

False

Film grain synthesis replaces film grain present in your content with similar quality synthesized AV1 film grain. We recommend that you choose Enabled to reduce the bandwidth of your QVBR quality level 5, 6, 7, or 8 outputs. For QVBR quality level 9 or 10 outputs we recommend that you keep the default value, Disabled. When you include Film grain synthesis, you cannot include the Noise reducer preprocessor.

framerateControl

Av1FramerateControl

False

Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

framerateConversionAlgorithm

Av1FramerateConversionAlgorithm

False

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

framerateDenominator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

framerateNumerator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

gopSize

number

Format: float

Minimum: 0.0

False

Specify the GOP length (keyframe interval) in frames. With AV1, MediaConvert doesn't support GOP length in seconds. This value must be greater than zero and preferably equal to 1 + ((numberBFrames + 1) * x), where x is an integer value.

maxBitrate

integer

Minimum: 1000

Maximum: 1152000000

False

Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.

numberBFramesBetweenReferenceFrames

integer

Minimum: 0

Maximum: 15

False

Specify from the number of B-frames, in the range of 0-15. For AV1 encoding, we recommend using 7 or 15. Choose a larger number for a lower bitrate and smaller file size; choose a smaller number for better video quality.

qvbrSettings

Av1QvbrSettings

False

Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.

rateControlMode

Av1RateControlMode

False

'With AV1 outputs, for rate control mode, MediaConvert supports only quality-defined variable bitrate (QVBR). You can''t use CBR or VBR.'

slices

integer

Minimum: 1

Maximum: 32

False

Specify the number of slices per picture. This value must be 1, 2, 4, 8, 16, or 32. For progressive pictures, this value must be less than or equal to the number of macroblock rows. For interlaced pictures, this value must be less than or equal to half the number of macroblock rows.

spatialAdaptiveQuantization

Av1SpatialAdaptiveQuantization

False

Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.

Av1SpatialAdaptiveQuantization

Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.

  • DISABLED

  • ENABLED

AvcIntraClass

Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.

  • CLASS_50

  • CLASS_100

  • CLASS_200

  • CLASS_4K_2K

AvcIntraFramerateControl

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

AvcIntraFramerateConversionAlgorithm

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

  • DUPLICATE_DROP

  • INTERPOLATE

  • FRAMEFORMER

AvcIntraInterlaceMode

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

  • PROGRESSIVE

  • TOP_FIELD

  • BOTTOM_FIELD

  • FOLLOW_TOP_FIELD

  • FOLLOW_BOTTOM_FIELD

AvcIntraScanTypeConversionMode

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

  • INTERLACED

  • INTERLACED_OPTIMIZE

AvcIntraSettings

Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.

PropertyTypeRequiredDescription
avcIntraClass

AvcIntraClass

False

Specify the AVC-Intra class of your output. The AVC-Intra class selection determines the output video bit rate depending on the frame rate of the output. Outputs with higher class values have higher bitrates and improved image quality. Note that for Class 4K/2K, MediaConvert supports only 4:2:2 chroma subsampling.

avcIntraUhdSettings

AvcIntraUhdSettings

False

Optional when you set AVC-Intra class to Class 4K/2K. When you set AVC-Intra class to a different value, this object isn't allowed.

framerateControl

AvcIntraFramerateControl

False

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

framerateConversionAlgorithm

AvcIntraFramerateConversionAlgorithm

False

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

framerateDenominator

integer

Minimum: 1

Maximum: 1001

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

framerateNumerator

integer

Minimum: 24

Maximum: 60000

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

interlaceMode

AvcIntraInterlaceMode

False

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

scanTypeConversionMode

AvcIntraScanTypeConversionMode

False

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

slowPal

AvcIntraSlowPal

False

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

telecine

AvcIntraTelecine

False

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine to create a smoother picture. When you keep the default value, None, MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

AvcIntraSlowPal

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

  • DISABLED

  • ENABLED

AvcIntraTelecine

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine to create a smoother picture. When you keep the default value, None, MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

  • NONE

  • HARD

AvcIntraUhdQualityTuningLevel

Optional. Use Quality tuning level to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass, your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass, your encoding time is faster. The default behavior is Single-pass.

  • SINGLE_PASS

  • MULTI_PASS

AvcIntraUhdSettings

Optional when you set AVC-Intra class to Class 4K/2K. When you set AVC-Intra class to a different value, this object isn't allowed.

PropertyTypeRequiredDescription
qualityTuningLevel

AvcIntraUhdQualityTuningLevel

False

Optional. Use Quality tuning level to choose how many transcoding passes MediaConvert does with your video. When you choose Multi-pass, your video quality is better and your output bitrate is more accurate. That is, the actual bitrate of your output is closer to the target bitrate defined in the specification. When you choose Single-pass, your encoding time is faster. The default behavior is Single-pass.

BandwidthReductionFilter

The Bandwidth reduction filter increases the video quality of your output relative to its bitrate. Use to lower the bitrate of your constant quality QVBR output, with little or no perceptual decrease in quality. Or, use to increase the video quality of outputs with other rate control modes relative to the bitrate that you specify. Bandwidth reduction increases further when your input is low quality or noisy. Outputs that use this feature incur pro-tier pricing. When you include Bandwidth reduction filter, you cannot include the Noise reducer preprocessor.

PropertyTypeRequiredDescription
sharpening

BandwidthReductionFilterSharpening

False

Optionally specify the level of sharpening to apply when you use the Bandwidth reduction filter. Sharpening adds contrast to the edges of your video content and can reduce softness. Keep the default value Off to apply no sharpening. Set Sharpening strength to Low to apply a minimal amount of sharpening, or High to apply a maximum amount of sharpening.

strength

BandwidthReductionFilterStrength

False

Specify the strength of the Bandwidth reduction filter. For most workflows, we recommend that you choose Auto to reduce the bandwidth of your output with little to no perceptual decrease in video quality. For high quality and high bitrate outputs, choose Low. For the most bandwidth reduction, choose High. We recommend that you choose High for low bitrate outputs. Note that High may incur a slight increase in the softness of your output.

BandwidthReductionFilterSharpening

Optionally specify the level of sharpening to apply when you use the Bandwidth reduction filter. Sharpening adds contrast to the edges of your video content and can reduce softness. Keep the default value Off to apply no sharpening. Set Sharpening strength to Low to apply a minimal amount of sharpening, or High to apply a maximum amount of sharpening.

  • LOW

  • MEDIUM

  • HIGH

  • OFF

BandwidthReductionFilterStrength

Specify the strength of the Bandwidth reduction filter. For most workflows, we recommend that you choose Auto to reduce the bandwidth of your output with little to no perceptual decrease in video quality. For high quality and high bitrate outputs, choose Low. For the most bandwidth reduction, choose High. We recommend that you choose High for low bitrate outputs. Note that High may incur a slight increase in the softness of your output.

  • LOW

  • MEDIUM

  • HIGH

  • AUTO

  • OFF

BurnInSubtitleStylePassthrough

To use the available style, color, and position information from your input captions: Set Style passthrough to Enabled. Note that MediaConvert uses default settings for any missing style or position information in your input captions To ignore the style and position information from your input captions and use default settings: Leave blank or keep the default value, Disabled. Default settings include white text with black outlining, bottom-center positioning, and automatic sizing. Whether you set Style passthrough to enabled or not, you can also choose to manually override any of the individual style and position settings. You can also override any fonts by manually specifying custom font files.

  • ENABLED

  • DISABLED

BurninDestinationSettings

Burn-in is a captions delivery method, rather than a captions format. Burn-in writes the captions directly on your video frames, replacing pixels of video content with the captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html.

PropertyTypeRequiredDescription
alignment

BurninSubtitleAlignment

False

Specify the alignment of your captions. If no explicit x_position is provided, setting alignment to centered will placethe captions at the bottom center of the output. Similarly, setting a left alignment willalign captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates.

applyFontColor

BurninSubtitleApplyFontColor

False

Ignore this setting unless Style passthrough is set to Enabled and Font color set to Black, Yellow, Red, Green, Blue, or Hex. Use Apply font color for additional font color controls. When you choose White text only, or leave blank, your font color setting only applies to white text in your input captions. For example, if your font color setting is Yellow, and your input captions have red and white text, your output captions will have red and yellow text. When you choose ALL_TEXT, your font color setting applies to all of your output captions text.

backgroundColor

BurninSubtitleBackgroundColor

False

Specify the color of the rectangle behind the captions. Leave background color blank and set Style passthrough to enabled to use the background color data from your input captions, if present.

backgroundOpacity

integer

Minimum: 0

Maximum: 255

False

Specify the opacity of the background rectangle. Enter a value from 0 to 255, where 0 is transparent and 255 is opaque. If Style passthrough is set to enabled, leave blank to pass through the background style information in your input captions to your output captions. If Style passthrough is set to disabled, leave blank to use a value of 0 and remove all backgrounds from your output captions.

fallbackFont

BurninSubtitleFallbackFont

False

Specify the font that you want the service to use for your burn in captions when your input captions specify a font that MediaConvert doesn't support. When you set Fallback font to best match, or leave blank, MediaConvert uses a supported font that most closely matches the font that your input captions specify. When there are multiple unsupported fonts in your input captions, MediaConvert matches each font with the supported font that matches best. When you explicitly choose a replacement font, MediaConvert uses that font to replace all unsupported fonts from your input.

fontColor

BurninSubtitleFontColor

False

Specify the color of the burned-in captions text. Leave Font color blank and set Style passthrough to enabled to use the font color data from your input captions, if present.

fontFileBold

string

Pattern: ^((s3://(.*?)\.(ttf))|(https?://(.*?)\.(ttf)(\?([^&=]+=[^&]+&)*[^&=]+=[^&]+)?))$

False

Specify a bold TrueType font file to use when rendering your output captions. Enter an S3, HTTP, or HTTPS URL. When you do, you must also separately specify a regular, an italic, and a bold italic font file.

fontFileBoldItalic

string

False

Specify a bold italic TrueType font file to use when rendering your output captions. Enter an S3, HTTP, or HTTPS URL. When you do, you must also separately specify a regular, a bold, and an italic font file.

fontFileItalic

string

Pattern: ^((s3://(.*?)\.(ttf))|(https?://(.*?)\.(ttf)(\?([^&=]+=[^&]+&)*[^&=]+=[^&]+)?))$

False

Specify an italic TrueType font file to use when rendering your output captions. Enter an S3, HTTP, or HTTPS URL. When you do, you must also separately specify a regular, a bold, and a bold italic font file.

fontFileRegular

string

Pattern: ^((s3://(.*?)\.(ttf))|(https?://(.*?)\.(ttf)(\?([^&=]+=[^&]+&)*[^&=]+=[^&]+)?))$

False

Specify a regular TrueType font file to use when rendering your output captions. Enter an S3, HTTP, or HTTPS URL. When you do, you must also separately specify a bold, an italic, and a bold italic font file.

fontOpacity

integer

Minimum: 0

Maximum: 255

False

Specify the opacity of the burned-in captions. 255 is opaque; 0 is transparent.

fontResolution

integer

Minimum: 96

Maximum: 600

False

Specify the Font resolution in DPI (dots per inch).

fontScript

FontScript

False

Set Font script to Automatically determined, or leave blank, to automatically determine the font script in your input captions. Otherwise, set to Simplified Chinese (HANS) or Traditional Chinese (HANT) if your input font script uses Simplified or Traditional Chinese.

fontSize

integer

Minimum: 0

Maximum: 96

False

Specify the Font size in pixels. Must be a positive integer. Set to 0, or leave blank, for automatic font size.

hexFontColor

string

Pattern: ^[0-9a-fA-F]{6}([0-9a-fA-F]{2})?$

MinLength: 6

MaxLength: 8

False

Ignore this setting unless your Font color is set to Hex. Enter either six or eight hexidecimal digits, representing red, green, and blue, with two optional extra digits for alpha. For example a value of 1122AABB is a red value of 0x11, a green value of 0x22, a blue value of 0xAA, and an alpha value of 0xBB.

outlineColor

BurninSubtitleOutlineColor

False

Specify font outline color. Leave Outline color blank and set Style passthrough to enabled to use the font outline color data from your input captions, if present.

outlineSize

integer

Minimum: 0

Maximum: 10

False

Specify the Outline size of the caption text, in pixels. Leave Outline size blank and set Style passthrough to enabled to use the outline size data from your input captions, if present.

shadowColor

BurninSubtitleShadowColor

False

Specify the color of the shadow cast by the captions. Leave Shadow color blank and set Style passthrough to enabled to use the shadow color data from your input captions, if present.

shadowOpacity

integer

Minimum: 0

Maximum: 255

False

Specify the opacity of the shadow. Enter a value from 0 to 255, where 0 is transparent and 255 is opaque. If Style passthrough is set to Enabled, leave Shadow opacity blank to pass through the shadow style information in your input captions to your output captions. If Style passthrough is set to disabled, leave blank to use a value of 0 and remove all shadows from your output captions.

shadowXOffset

integer

Minimum: -2147483648

Maximum: 2147483647

False

Specify the horizontal offset of the shadow, relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left.

shadowYOffset

integer

Minimum: -2147483648

Maximum: 2147483647

False

Specify the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. Leave Shadow y-offset blank and set Style passthrough to enabled to use the shadow y-offset data from your input captions, if present.

stylePassthrough

BurnInSubtitleStylePassthrough

False

To use the available style, color, and position information from your input captions: Set Style passthrough to Enabled. Note that MediaConvert uses default settings for any missing style or position information in your input captions To ignore the style and position information from your input captions and use default settings: Leave blank or keep the default value, Disabled. Default settings include white text with black outlining, bottom-center positioning, and automatic sizing. Whether you set Style passthrough to enabled or not, you can also choose to manually override any of the individual style and position settings. You can also override any fonts by manually specifying custom font files.

teletextSpacing

BurninSubtitleTeletextSpacing

False

Specify whether the text spacing in your captions is set by the captions grid, or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read for closed captions.

xPosition

integer

Minimum: 0

Maximum: 2147483647

False

Specify the horizontal position of the captions, relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter.

yPosition

integer

Minimum: 0

Maximum: 2147483647

False

Specify the vertical position of the captions, relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output.

BurninSubtitleAlignment

Specify the alignment of your captions. If no explicit x_position is provided, setting alignment to centered will placethe captions at the bottom center of the output. Similarly, setting a left alignment willalign captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates.

  • CENTERED

  • LEFT

  • AUTO

BurninSubtitleApplyFontColor

Ignore this setting unless Style passthrough is set to Enabled and Font color set to Black, Yellow, Red, Green, Blue, or Hex. Use Apply font color for additional font color controls. When you choose White text only, or leave blank, your font color setting only applies to white text in your input captions. For example, if your font color setting is Yellow, and your input captions have red and white text, your output captions will have red and yellow text. When you choose ALL_TEXT, your font color setting applies to all of your output captions text.

  • WHITE_TEXT_ONLY

  • ALL_TEXT

BurninSubtitleBackgroundColor

Specify the color of the rectangle behind the captions. Leave background color blank and set Style passthrough to enabled to use the background color data from your input captions, if present.

  • NONE

  • BLACK

  • WHITE

  • AUTO

BurninSubtitleFallbackFont

Specify the font that you want the service to use for your burn in captions when your input captions specify a font that MediaConvert doesn't support. When you set Fallback font to best match, or leave blank, MediaConvert uses a supported font that most closely matches the font that your input captions specify. When there are multiple unsupported fonts in your input captions, MediaConvert matches each font with the supported font that matches best. When you explicitly choose a replacement font, MediaConvert uses that font to replace all unsupported fonts from your input.

  • BEST_MATCH

  • MONOSPACED_SANSSERIF

  • MONOSPACED_SERIF

  • PROPORTIONAL_SANSSERIF

  • PROPORTIONAL_SERIF

BurninSubtitleFontColor

Specify the color of the burned-in captions text. Leave Font color blank and set Style passthrough to enabled to use the font color data from your input captions, if present.

  • WHITE

  • BLACK

  • YELLOW

  • RED

  • GREEN

  • BLUE

  • HEX

  • AUTO

BurninSubtitleOutlineColor

Specify font outline color. Leave Outline color blank and set Style passthrough to enabled to use the font outline color data from your input captions, if present.

  • BLACK

  • WHITE

  • YELLOW

  • RED

  • GREEN

  • BLUE

  • AUTO

BurninSubtitleShadowColor

Specify the color of the shadow cast by the captions. Leave Shadow color blank and set Style passthrough to enabled to use the shadow color data from your input captions, if present.

  • NONE

  • BLACK

  • WHITE

  • AUTO

BurninSubtitleTeletextSpacing

Specify whether the text spacing in your captions is set by the captions grid, or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read for closed captions.

  • FIXED_GRID

  • PROPORTIONAL

  • AUTO

CaptionDescriptionPreset

Caption Description for preset

PropertyTypeRequiredDescription
customLanguageCode

string

Pattern: ^[A-Za-z]{2,3}(-[A-Za-z-]+)?$

False

Specify the language for this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information when automatically selecting the font script for rendering the captions text. For all outputs, you can use an ISO 639-2 or ISO 639-3 code. For streaming outputs, you can also use any other code in the full RFC-5646 specification. Streaming outputs are those that are in one of the following output groups: CMAF, DASH ISO, Apple HLS, or Microsoft Smooth Streaming.

destinationSettings

CaptionDestinationSettings

False

Settings related to one captions tab on the MediaConvert console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.

languageCode

LanguageCode

False

Specify the language of this captions output track. For most captions output formats, the encoder puts this language information in the output captions metadata. If your output captions format is DVB-Sub or Burn in, the encoder uses this language information to choose the font language for rendering the captions text.

languageDescription

string

False

Specify a label for this set of output captions. For example, "English", "Director commentary", or "track_2". For streaming outputs, MediaConvert passes this information into destination manifests for display on the end-viewer's player device. For outputs in other output groups, the service ignores this setting.

CaptionDestinationSettings

Settings related to one captions tab on the MediaConvert console. Usually, one captions tab corresponds to one output captions track. Depending on your output captions format, one tab might correspond to a set of output captions tracks. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/including-captions.html.

PropertyTypeRequiredDescription
burninDestinationSettings

BurninDestinationSettings

False

Burn-in is a captions delivery method, rather than a captions format. Burn-in writes the captions directly on your video frames, replacing pixels of video content with the captions. Set up burn-in captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/burn-in-output-captions.html.

destinationType

CaptionDestinationType

False

Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded. To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20.

dvbSubDestinationSettings

DvbSubDestinationSettings

False

Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html.

embeddedDestinationSettings

EmbeddedDestinationSettings

False

Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html.

imscDestinationSettings

ImscDestinationSettings

False

Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html.

sccDestinationSettings

SccDestinationSettings

False

Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html.

srtDestinationSettings

SrtDestinationSettings

False

Settings related to SRT captions. SRT is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video.

teletextDestinationSettings

TeletextDestinationSettings

False

Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html.

ttmlDestinationSettings

TtmlDestinationSettings

False

Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html.

webvttDestinationSettings

WebvttDestinationSettings

False

Settings related to WebVTT captions. WebVTT is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html.

CaptionDestinationType

Specify the format for this set of captions on this output. The default format is embedded without SCTE-20. Note that your choice of video output container constrains your choice of output captions format. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/captions-support-tables.html. If you are using SCTE-20 and you want to create an output that complies with the SCTE-43 spec, choose SCTE-20 plus embedded. To create a non-compliant output where the embedded captions come first, choose Embedded plus SCTE-20.

  • BURN_IN

  • DVB_SUB

  • EMBEDDED

  • EMBEDDED_PLUS_SCTE20

  • IMSC

  • SCTE20_PLUS_EMBEDDED

  • SCC

  • SRT

  • SMI

  • TELETEXT

  • TTML

  • WEBVTT

ChannelMapping

Channel mapping contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.

PropertyTypeRequiredDescription
outputChannels

Array of type OutputChannelMapping

False

In your JSON job specification, include one child of OutputChannels for each audio channel that you want in your output. Each child should contain one instance of InputChannels or InputChannelsFineTune.

ClipLimits

Specify YUV limits and RGB tolerances when you set Sample range conversion to Limited range clip.

PropertyTypeRequiredDescription
maximumRGBTolerance

integer

Minimum: 90

Maximum: 105

False

Specify the Maximum RGB color sample range tolerance for your output. MediaConvert corrects any YUV values that, when converted to RGB, would be outside the upper tolerance that you specify. Enter an integer from 90 to 105 as an offset percentage to the maximum possible value. Leave blank to use the default value 100. When you specify a value for Maximum RGB tolerance, you must set Sample range conversion to Limited range clip.

maximumYUV

integer

Minimum: 920

Maximum: 1023

False

Specify the Maximum YUV color sample limit. MediaConvert conforms any pixels in your input above the value that you specify to typical limited range bounds. Enter an integer from 920 to 1023. Leave blank to use the default value 940. The value that you enter applies to 10-bit ranges. For 8-bit ranges, MediaConvert automatically scales this value down. When you specify a value for Maximum YUV, you must set Sample range conversion to Limited range clip.

minimumRGBTolerance

integer

Minimum: -5

Maximum: 10

False

Specify the Minimum RGB color sample range tolerance for your output. MediaConvert corrects any YUV values that, when converted to RGB, would be outside the lower tolerance that you specify. Enter an integer from -5 to 10 as an offset percentage to the minimum possible value. Leave blank to use the default value 0. When you specify a value for Minimum RGB tolerance, you must set Sample range conversion to Limited range clip.

minimumYUV

integer

Minimum: 0

Maximum: 128

False

Specify the Minimum YUV color sample limit. MediaConvert conforms any pixels in your input below the value that you specify to typical limited range bounds. Enter an integer from 0 to 128. Leave blank to use the default value 64. The value that you enter applies to 10-bit ranges. For 8-bit ranges, MediaConvert automatically scales this value down. When you specify a value for Minumum YUV, you must set Sample range conversion to Limited range clip.

CmfcAudioDuration

Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration. In all other cases, keep the default value, Default codec duration. When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.

  • DEFAULT_CODEC_DURATION

  • MATCH_VIDEO_DURATION

CmfcAudioTrackType

Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. Choose Audio-only variant stream (AUDIO_ONLY_VARIANT_STREAM) for any variant that you want to prohibit the client from playing with video. This causes MediaConvert to represent the variant as an EXT-X-STREAM-INF in the HLS manifest. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.

  • ALTERNATE_AUDIO_AUTO_SELECT_DEFAULT

  • ALTERNATE_AUDIO_AUTO_SELECT

  • ALTERNATE_AUDIO_NOT_AUTO_SELECT

  • AUDIO_ONLY_VARIANT_STREAM

CmfcDescriptiveVideoServiceFlag

Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag, MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag, MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.

  • DONT_FLAG

  • FLAG

CmfcIFrameOnlyManifest

Choose Include to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude.

  • INCLUDE

  • EXCLUDE

CmfcKlvMetadata

To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough. MediaConvert reads KLV metadata present in your input and writes each instance to a separate event message box in the output, according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to None or leave blank.

  • PASSTHROUGH

  • NONE

CmfcManifestMetadataSignaling

To add an InbandEventStream element in your output MPD manifest for each type of event message, set Manifest metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri will be same value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the InbandEventStream element schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of your output MPD manifest, set Manifest metadata signaling to Disabled. To enable Manifest metadata signaling, you must also set SCTE-35 source to Passthrough, ESAM SCTE-35 to insert, or ID3 metadata to Passthrough.

  • ENABLED

  • DISABLED

CmfcScte35Esam

Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML.

  • INSERT

  • NONE

CmfcScte35Source

Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't want those SCTE-35 markers in this output.

  • PASSTHROUGH

  • NONE

CmfcSettings

These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.

PropertyTypeRequiredDescription
audioDuration

CmfcAudioDuration

False

Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration. In all other cases, keep the default value, Default codec duration. When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.

audioGroupId

string

False

Specify the audio rendition group for this audio rendition. Specify up to one value for each audio output in your output group. This value appears in your HLS parent manifest in the EXT-X-MEDIA tag of TYPE=AUDIO, as the value for the GROUP-ID attribute. For example, if you specify "audio_aac_1" for Audio group ID, it appears in your manifest like this: #EXT-X-MEDIA:TYPE=AUDIO,GROUP-ID="audio_aac_1". Related setting: To associate the rendition group that this audio track belongs to with a video rendition, include the same value that you provide here for that video output's setting Audio rendition sets.

audioRenditionSets

string

False

List the audio rendition groups that you want included with this video rendition. Use a comma-separated list. For example, say you want to include the audio rendition groups that have the audio group IDs "audio_aac_1" and "audio_dolby". Then you would specify this value: "audio_aac_1,audio_dolby". Related setting: The rendition groups that you include in your comma-separated list should all match values that you specify in the setting Audio group ID for audio renditions in the same output group as this video rendition. Default behavior: If you don't specify anything here and for Audio group ID, MediaConvert puts each audio variant in its own audio rendition group and associates it with every video variant. Each value in your list appears in your HLS parent manifest in the EXT-X-STREAM-INF tag as the value for the AUDIO attribute. To continue the previous example, say that the file name for the child manifest for your video rendition is "amazing_video_1.m3u8". Then, in your parent manifest, each value will appear on separate lines, like this: #EXT-X-STREAM-INF:AUDIO="audio_aac_1"... amazing_video_1.m3u8 #EXT-X-STREAM-INF:AUDIO="audio_dolby"... amazing_video_1.m3u8

audioTrackType

CmfcAudioTrackType

False

Use this setting to control the values that MediaConvert puts in your HLS parent playlist to control how the client player selects which audio track to play. Choose Audio-only variant stream (AUDIO_ONLY_VARIANT_STREAM) for any variant that you want to prohibit the client from playing with video. This causes MediaConvert to represent the variant as an EXT-X-STREAM-INF in the HLS manifest. The other options for this setting determine the values that MediaConvert writes for the DEFAULT and AUTOSELECT attributes of the EXT-X-MEDIA entry for the audio variant. For more information about these attributes, see the Apple documentation article https://developer.apple.com/documentation/http_live_streaming/example_playlists_for_http_live_streaming/adding_alternate_media_to_a_playlist. Choose Alternate audio, auto select, default to set DEFAULT=YES and AUTOSELECT=YES. Choose this value for only one variant in your output group. Choose Alternate audio, auto select, not default to set DEFAULT=NO and AUTOSELECT=YES. Choose Alternate Audio, Not Auto Select to set DEFAULT=NO and AUTOSELECT=NO. When you don't specify a value for this setting, MediaConvert defaults to Alternate audio, auto select, default. When there is more than one variant in your output group, you must explicitly choose a value for this setting.

descriptiveVideoServiceFlag

CmfcDescriptiveVideoServiceFlag

False

Specify whether to flag this audio track as descriptive video service (DVS) in your HLS parent manifest. When you choose Flag, MediaConvert includes the parameter CHARACTERISTICS="public.accessibility.describes-video" in the EXT-X-MEDIA entry for this track. When you keep the default choice, Don't flag, MediaConvert leaves this parameter out. The DVS flag can help with accessibility on Apple devices. For more information, see the Apple documentation.

iFrameOnlyManifest

CmfcIFrameOnlyManifest

False

Choose Include to have MediaConvert generate an HLS child manifest that lists only the I-frames for this rendition, in addition to your regular manifest for this rendition. You might use this manifest as part of a workflow that creates preview functions for your video. MediaConvert adds both the I-frame only child manifest and the regular child manifest to the parent manifest. When you don't need the I-frame only child manifest, keep the default value Exclude.

klvMetadata

CmfcKlvMetadata

False

To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough. MediaConvert reads KLV metadata present in your input and writes each instance to a separate event message box in the output, according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to None or leave blank.

manifestMetadataSignaling

CmfcManifestMetadataSignaling

False

To add an InbandEventStream element in your output MPD manifest for each type of event message, set Manifest metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri will be same value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the InbandEventStream element schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of your output MPD manifest, set Manifest metadata signaling to Disabled. To enable Manifest metadata signaling, you must also set SCTE-35 source to Passthrough, ESAM SCTE-35 to insert, or ID3 metadata to Passthrough.

scte35Esam

CmfcScte35Esam

False

Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML.

scte35Source

CmfcScte35Source

False

Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't want those SCTE-35 markers in this output.

timedMetadata

CmfcTimedMetadata

False

To include ID3 metadata in this output: Set ID3 metadata to Passthrough. Specify this ID3 metadata in Custom ID3 metadata inserter. MediaConvert writes each instance of ID3 metadata in a separate Event Message (eMSG) box. To exclude this ID3 metadata: Set ID3 metadata to None or leave blank.

timedMetadataBoxVersion

CmfcTimedMetadataBoxVersion

False

Specify the event message box (eMSG) version for ID3 timed metadata in your output. For more information, see ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax. Leave blank to use the default value Version 0. When you specify Version 1, you must also set ID3 metadata to Passthrough.

timedMetadataSchemeIdUri

string

MaxLength: 1000

False

Specify the event message box (eMSG) scheme ID URI for ID3 timed metadata in your output. For more information, see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. Leave blank to use the default value: https://aomedia.org/emsg/ID3 When you specify a value for ID3 metadata scheme ID URI, you must also set ID3 metadata to Passthrough.

timedMetadataValue

string

MaxLength: 1000

False

Specify the event message box (eMSG) value for ID3 timed metadata in your output. For more information, see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. When you specify a value for ID3 Metadata Value, you must also set ID3 metadata to Passthrough.

CmfcTimedMetadata

To include ID3 metadata in this output: Set ID3 metadata to Passthrough. Specify this ID3 metadata in Custom ID3 metadata inserter. MediaConvert writes each instance of ID3 metadata in a separate Event Message (eMSG) box. To exclude this ID3 metadata: Set ID3 metadata to None or leave blank.

  • PASSTHROUGH

  • NONE

CmfcTimedMetadataBoxVersion

Specify the event message box (eMSG) version for ID3 timed metadata in your output. For more information, see ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax. Leave blank to use the default value Version 0. When you specify Version 1, you must also set ID3 metadata to Passthrough.

  • VERSION_0

  • VERSION_1

ColorCorrector

Settings for color correction.

PropertyTypeRequiredDescription
brightness

integer

Minimum: 1

Maximum: 100

False

Brightness level.

clipLimits

ClipLimits

False

Specify YUV limits and RGB tolerances when you set Sample range conversion to Limited range clip.

colorSpaceConversion

ColorSpaceConversion

False

Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses tone mapping to approximate the outcome of manually regrading from HDR to SDR. When you specify an output color space, MediaConvert uses the following color space metadata, which includes color primaries, transfer characteristics, and matrix coefficients: * HDR 10: BT.2020, PQ, BT.2020 non-constant * HLG 2020: BT.2020, HLG, BT.2020 non-constant * P3DCI (Theater): DCIP3, SMPTE 428M, BT.709 * P3D65 (SDR): Display P3, sRGB, BT.709 * P3D65 (HDR): Display P3, PQ, BT.709

contrast

integer

Minimum: 1

Maximum: 100

False

Contrast level.

hdr10Metadata

Hdr10Metadata

False

Use these settings when you convert to the HDR 10 color space. Specify the SMPTE ST 2086 Mastering Display Color Volume static metadata that you want signaled in the output. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator. When you set Color space conversion to HDR 10, these settings are required. You must set values for Max frame average light level and Max content light level; these settings don't have a default value. The default values for the other HDR 10 metadata settings are defined by the P3D65 color space. For more information about MediaConvert HDR jobs, see https://docs.aws.amazon.com/console/mediaconvert/hdr.

hdrToSdrToneMapper

HDRToSDRToneMapper

False

Specify how MediaConvert maps brightness and colors from your HDR input to your SDR output. The mode that you select represents a creative choice, with different tradeoffs in the details and tones of your output. To maintain details in bright or saturated areas of your output: Choose Preserve details. For some sources, your SDR output may look less bright and less saturated when compared to your HDR source. MediaConvert automatically applies this mode for HLG sources, regardless of your choice. For a bright and saturated output: Choose Vibrant. We recommend that you choose this mode when any of your source content is HDR10, and for the best results when it is mastered for 1000 nits. You may notice loss of details in bright or saturated areas of your output. HDR to SDR tone mapping has no effect when your input is SDR.

hue

integer

Minimum: -180

Maximum: 180

False

Hue in degrees.

maxLuminance

integer

Minimum: 0

Maximum: 2147483647

False

Specify the maximum mastering display luminance. Enter an integer from 0 to 2147483647, in units of 0.0001 nits. For example, enter 10000000 for 1000 nits.

sampleRangeConversion

SampleRangeConversion

False

Specify how MediaConvert limits the color sample range for this output. To create a limited range output from a full range input: Choose Limited range squeeze. For full range inputs, MediaConvert performs a linear offset to color samples equally across all pixels and frames. Color samples in 10-bit outputs are limited to 64 through 940, and 8-bit outputs are limited to 16 through 235. Note: For limited range inputs, values for color samples are passed through to your output unchanged. MediaConvert does not limit the sample range. To correct pixels in your input that are out of range or out of gamut: Choose Limited range clip. Use for broadcast applications. MediaConvert conforms any pixels outside of the values that you specify under Minimum YUV and Maximum YUV to limited range bounds. MediaConvert also corrects any YUV values that, when converted to RGB, would be outside the bounds you specify under Minimum RGB tolerance and Maximum RGB tolerance. With either limited range conversion, MediaConvert writes the sample range metadata in the output.

saturation

integer

Minimum: 1

Maximum: 100

False

Saturation level.

sdrReferenceWhiteLevel

integer

Minimum: 100

Maximum: 1000

False

Specify the reference white level, in nits, for all of your SDR inputs. Use to correct brightness levels within HDR10 outputs. The following color metadata must be present in your SDR input: color primaries, transfer characteristics, and matrix coefficients. If your SDR input has missing color metadata, or if you want to correct input color metadata, manually specify a color space in the input video selector. For 1,000 nit peak brightness displays, we recommend that you set SDR reference white level to 203 (according to ITU-R BT.2408). Leave blank to use the default value of 100, or specify an integer from 100 to 1000.

ColorMetadata

Choose Insert for this setting to include color metadata in this output. Choose Ignore to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.

  • IGNORE

  • INSERT

ColorSpaceConversion

Specify the color space you want for this output. The service supports conversion between HDR formats, between SDR formats, from SDR to HDR, and from HDR to SDR. SDR to HDR conversion doesn't upgrade the dynamic range. The converted video has an HDR format, but visually appears the same as an unconverted output. HDR to SDR conversion uses tone mapping to approximate the outcome of manually regrading from HDR to SDR. When you specify an output color space, MediaConvert uses the following color space metadata, which includes color primaries, transfer characteristics, and matrix coefficients: * HDR 10: BT.2020, PQ, BT.2020 non-constant * HLG 2020: BT.2020, HLG, BT.2020 non-constant * P3DCI (Theater): DCIP3, SMPTE 428M, BT.709 * P3D65 (SDR): Display P3, sRGB, BT.709 * P3D65 (HDR): Display P3, PQ, BT.709

  • NONE

  • FORCE_601

  • FORCE_709

  • FORCE_HDR10

  • FORCE_HLG_2020

  • FORCE_P3DCI

  • FORCE_P3D65_SDR

  • FORCE_P3D65_HDR

ContainerSettings

Container specific settings.

PropertyTypeRequiredDescription
cmfcSettings

CmfcSettings

False

These settings relate to the fragmented MP4 container for the segments in your CMAF outputs.

container

ContainerType

False

Container for this output. Some containers require a container settings object. If not specified, the default object will be created.

f4vSettings

F4vSettings

False

Settings for F4v container

m2tsSettings

M2tsSettings

False

MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.

m3u8Settings

M3u8Settings

False

These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.

movSettings

MovSettings

False

These settings relate to your QuickTime MOV output container.

mp4Settings

Mp4Settings

False

These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.

mpdSettings

MpdSettings

False

These settings relate to the fragmented MP4 container for the segments in your DASH outputs.

mxfSettings

MxfSettings

False

These settings relate to your MXF output container.

ContainerType

Container for this output. Some containers require a container settings object. If not specified, the default object will be created.

  • F4V

  • ISMV

  • M2TS

  • M3U8

  • CMFC

  • MOV

  • MP4

  • MPD

  • MXF

  • OGG

  • WEBM

  • RAW

  • Y4M

CreatePresetRequest

Send your create preset request with the name of the preset and the JSON for the output settings specified by the preset.

PropertyTypeRequiredDescription
category

string

False

Optional. A category for the preset you are creating.

description

string

False

Optional. A description of the preset you are creating.

name

string

True

The name of the preset you are creating.

settings

PresetSettings

True

Settings for preset

tags

object

False

The tags that you want to add to the resource. You can tag resources with a key-value pair or with only a key.

CreatePresetResponse

Successful create preset requests will return the preset JSON.

PropertyTypeRequiredDescription
preset

Preset

False

A preset is a collection of preconfigured media conversion settings that you want MediaConvert to apply to the output during the conversion process.

DeinterlaceAlgorithm

Only applies when you set Deinterlace mode to Deinterlace or Adaptive. Interpolate produces sharper pictures, while blend produces smoother motion. If your source file includes a ticker, such as a scrolling headline at the bottom of the frame: Choose Interpolate ticker or Blend ticker. To apply field doubling: Choose Linear interpolation. Note that Linear interpolation may introduce video artifacts into your output.

  • INTERPOLATE

  • INTERPOLATE_TICKER

  • BLEND

  • BLEND_TICKER

  • LINEAR_INTERPOLATION

Deinterlacer

Settings for deinterlacer

PropertyTypeRequiredDescription
algorithm

DeinterlaceAlgorithm

False

Only applies when you set Deinterlace mode to Deinterlace or Adaptive. Interpolate produces sharper pictures, while blend produces smoother motion. If your source file includes a ticker, such as a scrolling headline at the bottom of the frame: Choose Interpolate ticker or Blend ticker. To apply field doubling: Choose Linear interpolation. Note that Linear interpolation may introduce video artifacts into your output.

control

DeinterlacerControl

False

- When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.

mode

DeinterlacerMode

False

Use Deinterlacer to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.

DeinterlacerControl

- When set to NORMAL (default), the deinterlacer does not convert frames that are tagged in metadata as progressive. It will only convert those that are tagged as some other type. - When set to FORCE_ALL_FRAMES, the deinterlacer converts every frame to progressive - even those that are already tagged as progressive. Turn Force mode on only if there is a good chance that the metadata has tagged frames as progressive when they are not progressive. Do not turn on otherwise; processing frames that are already progressive into progressive will probably result in lower quality video.

  • FORCE_ALL_FRAMES

  • NORMAL

DeinterlacerMode

Use Deinterlacer to choose how the service will do deinterlacing. Default is Deinterlace. - Deinterlace converts interlaced to progressive. - Inverse telecine converts Hard Telecine 29.97i to progressive 23.976p. - Adaptive auto-detects and converts to progressive.

  • DEINTERLACE

  • INVERSE_TELECINE

  • ADAPTIVE

DolbyVision

Create Dolby Vision Profile 5 or Profile 8.1 compatible video output.

PropertyTypeRequiredDescription
l6Metadata

DolbyVisionLevel6Metadata

False

Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.

l6Mode

DolbyVisionLevel6Mode

False

Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.

mapping

DolbyVisionMapping

False

Required when you set Dolby Vision Profile to Profile 8.1. When you set Content mapping to None, content mapping is not applied to the HDR10-compatible signal. Depending on the source peak nit level, clipping might occur on HDR devices without Dolby Vision. When you set Content mapping to HDR10 1000, the transcoder creates a 1,000 nits peak HDR10-compatible signal by applying static content mapping to the source. This mode is speed-optimized for PQ10 sources with metadata that is created from analysis. For graded Dolby Vision content, be aware that creative intent might not be guaranteed with extreme 1,000 nits trims.

profile

DolbyVisionProfile

False

Required when you enable Dolby Vision. Use Profile 5 to include frame-interleaved Dolby Vision metadata in your output. Your input must include Dolby Vision metadata or an HDR10 YUV color space. Use Profile 8.1 to include frame-interleaved Dolby Vision metadata and HDR10 metadata in your output. Your input must include Dolby Vision metadata.

DolbyVisionLevel6Metadata

Use these settings when you set DolbyVisionLevel6Mode to SPECIFY to override the MaxCLL and MaxFALL values in your input with new values.

PropertyTypeRequiredDescription
maxCll

integer

Minimum: 0

Maximum: 65535

False

Maximum Content Light Level. Static HDR metadata that corresponds to the brightest pixel in the entire stream. Measured in nits.

maxFall

integer

Minimum: 0

Maximum: 65535

False

Maximum Frame-Average Light Level. Static HDR metadata that corresponds to the highest frame-average brightness in the entire stream. Measured in nits.

DolbyVisionLevel6Mode

Use Dolby Vision Mode to choose how the service will handle Dolby Vision MaxCLL and MaxFALL properies.

  • PASSTHROUGH

  • RECALCULATE

  • SPECIFY

DolbyVisionMapping

Required when you set Dolby Vision Profile to Profile 8.1. When you set Content mapping to None, content mapping is not applied to the HDR10-compatible signal. Depending on the source peak nit level, clipping might occur on HDR devices without Dolby Vision. When you set Content mapping to HDR10 1000, the transcoder creates a 1,000 nits peak HDR10-compatible signal by applying static content mapping to the source. This mode is speed-optimized for PQ10 sources with metadata that is created from analysis. For graded Dolby Vision content, be aware that creative intent might not be guaranteed with extreme 1,000 nits trims.

  • HDR10_NOMAP

  • HDR10_1000

DolbyVisionProfile

Required when you enable Dolby Vision. Use Profile 5 to include frame-interleaved Dolby Vision metadata in your output. Your input must include Dolby Vision metadata or an HDR10 YUV color space. Use Profile 8.1 to include frame-interleaved Dolby Vision metadata and HDR10 metadata in your output. Your input must include Dolby Vision metadata.

  • PROFILE_5

  • PROFILE_8_1

DropFrameTimecode

Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion is enabled.

  • DISABLED

  • ENABLED

DvbNitSettings

Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output.

PropertyTypeRequiredDescription
networkId

integer

Minimum: 0

Maximum: 65535

False

The numeric value placed in the Network Information Table (NIT).

networkName

string

MinLength: 1

MaxLength: 256

False

The network name text placed in the network_name_descriptor inside the Network Information Table. Maximum length is 256 characters.

nitInterval

integer

Minimum: 25

Maximum: 10000

False

The number of milliseconds between instances of this table in the output transport stream.

DvbSdtSettings

Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output.

PropertyTypeRequiredDescription
outputSdt

OutputSdt

False

Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.

sdtInterval

integer

Minimum: 25

Maximum: 2000

False

The number of milliseconds between instances of this table in the output transport stream.

serviceName

string

MinLength: 1

MaxLength: 256

False

The service name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.

serviceProviderName

string

MinLength: 1

MaxLength: 256

False

The service provider name placed in the service_descriptor in the Service Description Table. Maximum length is 256 characters.

DvbSubDestinationSettings

Settings related to DVB-Sub captions. Set up DVB-Sub captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/dvb-sub-output-captions.html.

PropertyTypeRequiredDescription
alignment

DvbSubtitleAlignment

False

Specify the alignment of your captions. If no explicit x_position is provided, setting alignment to centered will placethe captions at the bottom center of the output. Similarly, setting a left alignment willalign captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. Within your job settings, all of your DVB-Sub settings must be identical.

applyFontColor

DvbSubtitleApplyFontColor

False

Ignore this setting unless Style Passthrough is set to Enabled and Font color set to Black, Yellow, Red, Green, Blue, or Hex. Use Apply font color for additional font color controls. When you choose White text only, or leave blank, your font color setting only applies to white text in your input captions. For example, if your font color setting is Yellow, and your input captions have red and white text, your output captions will have red and yellow text. When you choose ALL_TEXT, your font color setting applies to all of your output captions text.

backgroundColor

DvbSubtitleBackgroundColor

False

Specify the color of the rectangle behind the captions. Leave background color blank and set Style passthrough to enabled to use the background color data from your input captions, if present.

backgroundOpacity

integer

Minimum: 0

Maximum: 255

False

Specify the opacity of the background rectangle. Enter a value from 0 to 255, where 0 is transparent and 255 is opaque. If Style passthrough is set to enabled, leave blank to pass through the background style information in your input captions to your output captions. If Style passthrough is set to disabled, leave blank to use a value of 0 and remove all backgrounds from your output captions. Within your job settings, all of your DVB-Sub settings must be identical.

ddsHandling

DvbddsHandling

False

Specify how MediaConvert handles the display definition segment (DDS). To exclude the DDS from this set of captions: Keep the default, None. To include the DDS: Choose Specified. When you do, also specify the offset coordinates of the display window with DDS x-coordinate and DDS y-coordinate. To include the DDS, but not include display window data: Choose No display window. When you do, you can write position metadata to the page composition segment (PCS) with DDS x-coordinate and DDS y-coordinate. For video resolutions with a height of 576 pixels or less, MediaConvert doesn't include the DDS, regardless of the value you choose for DDS handling. All burn-in and DVB-Sub font settings must match.

ddsXCoordinate

integer

Minimum: 0

Maximum: 2147483647

False

Use this setting, along with DDS y-coordinate, to specify the upper left corner of the display definition segment (DDS) display window. With this setting, specify the distance, in pixels, between the left side of the frame and the left side of the DDS display window. Keep the default value, 0, to have MediaConvert automatically choose this offset. Related setting: When you use this setting, you must set DDS handling to a value other than None. MediaConvert uses these values to determine whether to write page position data to the DDS or to the page composition segment. All burn-in and DVB-Sub font settings must match.

ddsYCoordinate

integer

Minimum: 0

Maximum: 2147483647

False

Use this setting, along with DDS x-coordinate, to specify the upper left corner of the display definition segment (DDS) display window. With this setting, specify the distance, in pixels, between the top of the frame and the top of the DDS display window. Keep the default value, 0, to have MediaConvert automatically choose this offset. Related setting: When you use this setting, you must set DDS handling to a value other than None. MediaConvert uses these values to determine whether to write page position data to the DDS or to the page composition segment (PCS). All burn-in and DVB-Sub font settings must match.

fallbackFont

DvbSubSubtitleFallbackFont

False

Specify the font that you want the service to use for your burn in captions when your input captions specify a font that MediaConvert doesn't support. When you set Fallback font to best match, or leave blank, MediaConvert uses a supported font that most closely matches the font that your input captions specify. When there are multiple unsupported fonts in your input captions, MediaConvert matches each font with the supported font that matches best. When you explicitly choose a replacement font, MediaConvert uses that font to replace all unsupported fonts from your input.

fontColor

DvbSubtitleFontColor

False

Specify the color of the captions text. Leave Font color blank and set Style passthrough to enabled to use the font color data from your input captions, if present. Within your job settings, all of your DVB-Sub settings must be identical.

fontFileBold

string

Pattern: ^((s3://(.*?)\.(ttf))|(https?://(.*?)\.(ttf)(\?([^&=]+=[^&]+&)*[^&=]+=[^&]+)?))$

False

Specify a bold TrueType font file to use when rendering your output captions. Enter an S3, HTTP, or HTTPS URL. When you do, you must also separately specify a regular, an italic, and a bold italic font file.

fontFileBoldItalic

string

Pattern: ^((s3://(.*?)\.(ttf))|(https?://(.*?)\.(ttf)(\?([^&=]+=[^&]+&)*[^&=]+=[^&]+)?))$

False

Specify a bold italic TrueType font file to use when rendering your output captions. Enter an S3, HTTP, or HTTPS URL. When you do, you must also separately specify a regular, a bold, and an italic font file.

fontFileItalic

string

Pattern: ^((s3://(.*?)\.(ttf))|(https?://(.*?)\.(ttf)(\?([^&=]+=[^&]+&)*[^&=]+=[^&]+)?))$

False

Specify an italic TrueType font file to use when rendering your output captions. Enter an S3, HTTP, or HTTPS URL. When you do, you must also separately specify a regular, a bold, and a bold italic font file.

fontFileRegular

string

Pattern: ^((s3://(.*?)\.(ttf))|(https?://(.*?)\.(ttf)(\?([^&=]+=[^&]+&)*[^&=]+=[^&]+)?))$

False

Specify a regular TrueType font file to use when rendering your output captions. Enter an S3, HTTP, or HTTPS URL. When you do, you must also separately specify a bold, an italic, and a bold italic font file.

fontOpacity

integer

Minimum: 0

Maximum: 255

False

Specify the opacity of the burned-in captions. 255 is opaque; 0 is transparent. Within your job settings, all of your DVB-Sub settings must be identical.

fontResolution

integer

Minimum: 96

Maximum: 600

False

Specify the Font resolution in DPI (dots per inch). Within your job settings, all of your DVB-Sub settings must be identical.

fontScript

FontScript

False

Set Font script to Automatically determined, or leave blank, to automatically determine the font script in your input captions. Otherwise, set to Simplified Chinese (HANS) or Traditional Chinese (HANT) if your input font script uses Simplified or Traditional Chinese. Within your job settings, all of your DVB-Sub settings must be identical.

fontSize

integer

Minimum: 0

Maximum: 96

False

Specify the Font size in pixels. Must be a positive integer. Set to 0, or leave blank, for automatic font size. Within your job settings, all of your DVB-Sub settings must be identical.

height

integer

Minimum: 1

Maximum: 2147483647

False

Specify the height, in pixels, of this set of DVB-Sub captions. The default value is 576 pixels. Related setting: When you use this setting, you must set DDS handling to a value other than None. All burn-in and DVB-Sub font settings must match.

hexFontColor

string

Pattern: ^[0-9a-fA-F]{6}([0-9a-fA-F]{2})?$

MinLength: 6

MaxLength: 8

False

Ignore this setting unless your Font color is set to Hex. Enter either six or eight hexidecimal digits, representing red, green, and blue, with two optional extra digits for alpha. For example a value of 1122AABB is a red value of 0x11, a green value of 0x22, a blue value of 0xAA, and an alpha value of 0xBB.

outlineColor

DvbSubtitleOutlineColor

False

Specify font outline color. Leave Outline color blank and set Style passthrough to enabled to use the font outline color data from your input captions, if present. Within your job settings, all of your DVB-Sub settings must be identical.

outlineSize

integer

Minimum: 0

Maximum: 10

False

Specify the Outline size of the caption text, in pixels. Leave Outline size blank and set Style passthrough to enabled to use the outline size data from your input captions, if present. Within your job settings, all of your DVB-Sub settings must be identical.

shadowColor

DvbSubtitleShadowColor

False

Specify the color of the shadow cast by the captions. Leave Shadow color blank and set Style passthrough to enabled to use the shadow color data from your input captions, if present. Within your job settings, all of your DVB-Sub settings must be identical.

shadowOpacity

integer

Minimum: 0

Maximum: 255

False

Specify the opacity of the shadow. Enter a value from 0 to 255, where 0 is transparent and 255 is opaque. If Style passthrough is set to Enabled, leave Shadow opacity blank to pass through the shadow style information in your input captions to your output captions. If Style passthrough is set to disabled, leave blank to use a value of 0 and remove all shadows from your output captions. Within your job settings, all of your DVB-Sub settings must be identical.

shadowXOffset

integer

Minimum: -2147483648

Maximum: 2147483647

False

Specify the horizontal offset of the shadow, relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels to the left. Within your job settings, all of your DVB-Sub settings must be identical.

shadowYOffset

integer

Minimum: -2147483648

Maximum: 2147483647

False

Specify the vertical offset of the shadow relative to the captions in pixels. A value of -2 would result in a shadow offset 2 pixels above the text. Leave Shadow y-offset blank and set Style passthrough to enabled to use the shadow y-offset data from your input captions, if present. Within your job settings, all of your DVB-Sub settings must be identical.

stylePassthrough

DvbSubtitleStylePassthrough

False

To use the available style, color, and position information from your input captions: Set Style passthrough to Enabled. Note that MediaConvert uses default settings for any missing style or position information in your input captions To ignore the style and position information from your input captions and use default settings: Leave blank or keep the default value, Disabled. Default settings include white text with black outlining, bottom-center positioning, and automatic sizing. Whether you set Style passthrough to enabled or not, you can also choose to manually override any of the individual style and position settings. You can also override any fonts by manually specifying custom font files.

subtitlingType

DvbSubtitlingType

False

Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.

teletextSpacing

DvbSubtitleTeletextSpacing

False

Specify whether the Text spacing in your captions is set by the captions grid, or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read for closed captions. Within your job settings, all of your DVB-Sub settings must be identical.

width

integer

Minimum: 1

Maximum: 2147483647

False

Specify the width, in pixels, of this set of DVB-Sub captions. The default value is 720 pixels. Related setting: When you use this setting, you must set DDS handling to a value other than None. All burn-in and DVB-Sub font settings must match.

xPosition

integer

Minimum: 0

Maximum: 2147483647

False

Specify the horizontal position of the captions, relative to the left side of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the left of the output. If no explicit x_position is provided, the horizontal caption position will be determined by the alignment parameter. Within your job settings, all of your DVB-Sub settings must be identical.

yPosition

integer

Minimum: 0

Maximum: 2147483647

False

Specify the vertical position of the captions, relative to the top of the output in pixels. A value of 10 would result in the captions starting 10 pixels from the top of the output. If no explicit y_position is provided, the caption will be positioned towards the bottom of the output. Within your job settings, all of your DVB-Sub settings must be identical.

DvbSubSubtitleFallbackFont

Specify the font that you want the service to use for your burn in captions when your input captions specify a font that MediaConvert doesn't support. When you set Fallback font to best match, or leave blank, MediaConvert uses a supported font that most closely matches the font that your input captions specify. When there are multiple unsupported fonts in your input captions, MediaConvert matches each font with the supported font that matches best. When you explicitly choose a replacement font, MediaConvert uses that font to replace all unsupported fonts from your input.

  • BEST_MATCH

  • MONOSPACED_SANSSERIF

  • MONOSPACED_SERIF

  • PROPORTIONAL_SANSSERIF

  • PROPORTIONAL_SERIF

DvbSubtitleAlignment

Specify the alignment of your captions. If no explicit x_position is provided, setting alignment to centered will placethe captions at the bottom center of the output. Similarly, setting a left alignment willalign captions to the bottom left of the output. If x and y positions are given in conjunction with the alignment parameter, the font will be justified (either left or centered) relative to those coordinates. Within your job settings, all of your DVB-Sub settings must be identical.

  • CENTERED

  • LEFT

  • AUTO

DvbSubtitleApplyFontColor

Ignore this setting unless Style Passthrough is set to Enabled and Font color set to Black, Yellow, Red, Green, Blue, or Hex. Use Apply font color for additional font color controls. When you choose White text only, or leave blank, your font color setting only applies to white text in your input captions. For example, if your font color setting is Yellow, and your input captions have red and white text, your output captions will have red and yellow text. When you choose ALL_TEXT, your font color setting applies to all of your output captions text.

  • WHITE_TEXT_ONLY

  • ALL_TEXT

DvbSubtitleBackgroundColor

Specify the color of the rectangle behind the captions. Leave background color blank and set Style passthrough to enabled to use the background color data from your input captions, if present.

  • NONE

  • BLACK

  • WHITE

  • AUTO

DvbSubtitleFontColor

Specify the color of the captions text. Leave Font color blank and set Style passthrough to enabled to use the font color data from your input captions, if present. Within your job settings, all of your DVB-Sub settings must be identical.

  • WHITE

  • BLACK

  • YELLOW

  • RED

  • GREEN

  • BLUE

  • HEX

  • AUTO

DvbSubtitleOutlineColor

Specify font outline color. Leave Outline color blank and set Style passthrough to enabled to use the font outline color data from your input captions, if present. Within your job settings, all of your DVB-Sub settings must be identical.

  • BLACK

  • WHITE

  • YELLOW

  • RED

  • GREEN

  • BLUE

  • AUTO

DvbSubtitleShadowColor

Specify the color of the shadow cast by the captions. Leave Shadow color blank and set Style passthrough to enabled to use the shadow color data from your input captions, if present. Within your job settings, all of your DVB-Sub settings must be identical.

  • NONE

  • BLACK

  • WHITE

  • AUTO

DvbSubtitleStylePassthrough

To use the available style, color, and position information from your input captions: Set Style passthrough to Enabled. Note that MediaConvert uses default settings for any missing style or position information in your input captions To ignore the style and position information from your input captions and use default settings: Leave blank or keep the default value, Disabled. Default settings include white text with black outlining, bottom-center positioning, and automatic sizing. Whether you set Style passthrough to enabled or not, you can also choose to manually override any of the individual style and position settings. You can also override any fonts by manually specifying custom font files.

  • ENABLED

  • DISABLED

DvbSubtitleTeletextSpacing

Specify whether the Text spacing in your captions is set by the captions grid, or varies depending on letter width. Choose fixed grid to conform to the spacing specified in the captions file more accurately. Choose proportional to make the text easier to read for closed captions. Within your job settings, all of your DVB-Sub settings must be identical.

  • FIXED_GRID

  • PROPORTIONAL

  • AUTO

DvbSubtitlingType

Specify whether your DVB subtitles are standard or for hearing impaired. Choose hearing impaired if your subtitles include audio descriptions and dialogue. Choose standard if your subtitles include only dialogue.

  • HEARING_IMPAIRED

  • STANDARD

DvbTdtSettings

Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output.

PropertyTypeRequiredDescription
tdtInterval

integer

Minimum: 1000

Maximum: 30000

False

The number of milliseconds between instances of this table in the output transport stream.

DvbddsHandling

Specify how MediaConvert handles the display definition segment (DDS). To exclude the DDS from this set of captions: Keep the default, None. To include the DDS: Choose Specified. When you do, also specify the offset coordinates of the display window with DDS x-coordinate and DDS y-coordinate. To include the DDS, but not include display window data: Choose No display window. When you do, you can write position metadata to the page composition segment (PCS) with DDS x-coordinate and DDS y-coordinate. For video resolutions with a height of 576 pixels or less, MediaConvert doesn't include the DDS, regardless of the value you choose for DDS handling. All burn-in and DVB-Sub font settings must match.

  • NONE

  • SPECIFIED

  • NO_DISPLAY_WINDOW

Eac3AtmosBitstreamMode

Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).

  • COMPLETE_MAIN

Eac3AtmosCodingMode

The coding mode for Dolby Digital Plus JOC (Atmos).

  • CODING_MODE_AUTO

  • CODING_MODE_5_1_4

  • CODING_MODE_7_1_4

  • CODING_MODE_9_1_6

Eac3AtmosDialogueIntelligence

Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.

  • ENABLED

  • DISABLED

Eac3AtmosDownmixControl

Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom to provide downmix values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround, Left total/Right total surround, Left total/Right total center, Left only/Right only center, and Stereo downmix. When you keep Custom for Downmix control and you don't specify values for the related settings, MediaConvert uses default values for those settings.

  • SPECIFIED

  • INITIALIZE_FROM_SOURCE

Eac3AtmosDynamicRangeCompressionLine

Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression line. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

  • NONE

  • FILM_STANDARD

  • FILM_LIGHT

  • MUSIC_STANDARD

  • MUSIC_LIGHT

  • SPEECH

Eac3AtmosDynamicRangeCompressionRf

Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression RF. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

  • NONE

  • FILM_STANDARD

  • FILM_LIGHT

  • MUSIC_STANDARD

  • MUSIC_LIGHT

  • SPEECH

Eac3AtmosDynamicRangeControl

Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom, to provide dynamic range control values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line and Dynamic range compression RF. When you keep the value Custom for Dynamic range control and you don't specify values for the related settings, MediaConvert uses default values for those settings.

  • SPECIFIED

  • INITIALIZE_FROM_SOURCE

Eac3AtmosMeteringMode

Choose how the service meters the loudness of your audio.

  • LEQ_A

  • ITU_BS_1770_1

  • ITU_BS_1770_2

  • ITU_BS_1770_3

  • ITU_BS_1770_4

Eac3AtmosSettings

Required when you set Codec to the value EAC3_ATMOS.

PropertyTypeRequiredDescription
bitrate

integer

Minimum: 384000

Maximum: 1024000

False

Specify the average bitrate for this output in bits per second. Valid values: 384k, 448k, 576k, 640k, 768k, 1024k Default value: 448k Note that MediaConvert supports 384k only with channel-based immersive (CBI) 7.1.4 and 5.1.4 inputs. For CBI 9.1.6 and other input types, MediaConvert automatically increases your output bitrate to 448k.

bitstreamMode

Eac3AtmosBitstreamMode

False

Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).

codingMode

Eac3AtmosCodingMode

False

The coding mode for Dolby Digital Plus JOC (Atmos).

dialogueIntelligence

Eac3AtmosDialogueIntelligence

False

Enable Dolby Dialogue Intelligence to adjust loudness based on dialogue analysis.

downmixControl

Eac3AtmosDownmixControl

False

Specify whether MediaConvert should use any downmix metadata from your input file. Keep the default value, Custom to provide downmix values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your downmix values: Left only/Right only surround, Left total/Right total surround, Left total/Right total center, Left only/Right only center, and Stereo downmix. When you keep Custom for Downmix control and you don't specify values for the related settings, MediaConvert uses default values for those settings.

dynamicRangeCompressionLine

Eac3AtmosDynamicRangeCompressionLine

False

Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the line operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression line. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

dynamicRangeCompressionRf

Eac3AtmosDynamicRangeCompressionRf

False

Choose the Dolby dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby stream for the RF operating mode. Default value: Film light Related setting: To have MediaConvert use the value you specify here, keep the default value, Custom for the setting Dynamic range control. Otherwise, MediaConvert ignores Dynamic range compression RF. For information about the Dolby DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

dynamicRangeControl

Eac3AtmosDynamicRangeControl

False

Specify whether MediaConvert should use any dynamic range control metadata from your input file. Keep the default value, Custom, to provide dynamic range control values in your job settings. Choose Follow source to use the metadata from your input. Related settings--Use these settings to specify your dynamic range control values: Dynamic range compression line and Dynamic range compression RF. When you keep the value Custom for Dynamic range control and you don't specify values for the related settings, MediaConvert uses default values for those settings.

loRoCenterMixLevel

number

Format: float

Minimum: -6.0

Maximum: 3.0

False

Specify a value for the following Dolby Atmos setting: Left only/Right only center mix (Lo/Ro center). MediaConvert uses this value for downmixing. Default value: -3 dB. Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left only/Right only center.

loRoSurroundMixLevel

number

Format: float

Minimum: -60.0

Maximum: -1.5

False

Specify a value for the following Dolby Atmos setting: Left only/Right only. MediaConvert uses this value for downmixing. Default value: -3 dB. Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left only/Right only surround.

ltRtCenterMixLevel

number

Format: float

Minimum: -6.0

Maximum: 3.0

False

Specify a value for the following Dolby Atmos setting: Left total/Right total center mix (Lt/Rt center). MediaConvert uses this value for downmixing. Default value: -3 dB Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, and -6.0. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Left total/Right total center.

ltRtSurroundMixLevel

number

Format: float

Minimum: -60.0

Maximum: -1.5

False

Specify a value for the following Dolby Atmos setting: Left total/Right total surround mix (Lt/Rt surround). MediaConvert uses this value for downmixing. Default value: -3 dB Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. Related setting: How the service uses this value depends on the value that you choose for Stereo downmix. Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, the service ignores Left total/Right total surround.

meteringMode

Eac3AtmosMeteringMode

False

Choose how the service meters the loudness of your audio.

sampleRate

integer

Minimum: 48000

Maximum: 48000

False

This value is always 48000. It represents the sample rate in Hz.

speechThreshold

integer

Minimum: 0

Maximum: 100

False

Specify the percentage of audio content, from 0% to 100%, that must be speech in order for the encoder to use the measured speech loudness as the overall program loudness. Default value: 15%

stereoDownmix

Eac3AtmosStereoDownmix

False

Choose how the service does stereo downmixing. Default value: Not indicated Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Stereo downmix.

surroundExMode

Eac3AtmosSurroundExMode

False

Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.

Eac3AtmosStereoDownmix

Choose how the service does stereo downmixing. Default value: Not indicated Related setting: To have MediaConvert use this value, keep the default value, Custom for the setting Downmix control. Otherwise, MediaConvert ignores Stereo downmix.

  • NOT_INDICATED

  • STEREO

  • SURROUND

  • DPL2

Eac3AtmosSurroundExMode

Specify whether your input audio has an additional center rear surround channel matrix encoded into your left and right surround channels.

  • NOT_INDICATED

  • ENABLED

  • DISABLED

Eac3AttenuationControl

If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.

  • ATTENUATE_3_DB

  • NONE

Eac3BitstreamMode

Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).

  • COMPLETE_MAIN

  • COMMENTARY

  • EMERGENCY

  • HEARING_IMPAIRED

  • VISUALLY_IMPAIRED

Eac3CodingMode

Dolby Digital Plus coding mode. Determines number of channels.

  • CODING_MODE_1_0

  • CODING_MODE_2_0

  • CODING_MODE_3_2

Eac3DcFilter

Activates a DC highpass filter for all input channels.

  • ENABLED

  • DISABLED

Eac3DynamicRangeCompressionLine

Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile. For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

  • NONE

  • FILM_STANDARD

  • FILM_LIGHT

  • MUSIC_STANDARD

  • MUSIC_LIGHT

  • SPEECH

Eac3DynamicRangeCompressionRf

Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile. For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

  • NONE

  • FILM_STANDARD

  • FILM_LIGHT

  • MUSIC_STANDARD

  • MUSIC_LIGHT

  • SPEECH

Eac3LfeControl

When encoding 3/2 audio, controls whether the LFE channel is enabled

  • LFE

  • NO_LFE

Eac3LfeFilter

Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.

  • ENABLED

  • DISABLED

Eac3MetadataControl

When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.

  • FOLLOW_INPUT

  • USE_CONFIGURED

Eac3PassthroughControl

When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.

  • WHEN_POSSIBLE

  • NO_PASSTHROUGH

Eac3PhaseControl

Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.

  • SHIFT_90_DEGREES

  • NO_SHIFT

Eac3Settings

Required when you set Codec to the value EAC3.

PropertyTypeRequiredDescription
attenuationControl

Eac3AttenuationControl

False

If set to ATTENUATE_3_DB, applies a 3 dB attenuation to the surround channels. Only used for 3/2 coding mode.

bitrate

integer

Minimum: 32000

Maximum: 3024000

False

Specify the average bitrate in bits per second. The bitrate that you specify must be a multiple of 8000 within the allowed minimum and maximum values. Leave blank to use the default bitrate for the coding mode you select according ETSI TS 102 366. Valid bitrates for coding mode 1/0: Default: 96000. Minimum: 32000. Maximum: 3024000. Valid bitrates for coding mode 2/0: Default: 192000. Minimum: 96000. Maximum: 3024000. Valid bitrates for coding mode 3/2: Default: 384000. Minimum: 192000. Maximum: 3024000.

bitstreamMode

Eac3BitstreamMode

False

Specify the bitstream mode for the E-AC-3 stream that the encoder emits. For more information about the EAC3 bitstream mode, see ATSC A/52-2012 (Annex E).

codingMode

Eac3CodingMode

False

Dolby Digital Plus coding mode. Determines number of channels.

dcFilter

Eac3DcFilter

False

Activates a DC highpass filter for all input channels.

dialnorm

integer

Minimum: 1

Maximum: 31

False

Sets the dialnorm for the output. If blank and input audio is Dolby Digital Plus, dialnorm will be passed through.

dynamicRangeCompressionLine

Eac3DynamicRangeCompressionLine

False

Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the line operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile. For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

dynamicRangeCompressionRf

Eac3DynamicRangeCompressionRf

False

Choose the Dolby Digital dynamic range control (DRC) profile that MediaConvert uses when encoding the metadata in the Dolby Digital stream for the RF operating mode. Related setting: When you use this setting, MediaConvert ignores any value you provide for Dynamic range compression profile. For information about the Dolby Digital DRC operating modes and profiles, see the Dynamic Range Control chapter of the Dolby Metadata Guide at https://developer.dolby.com/globalassets/professional/documents/dolby-metadata-guide.pdf.

lfeControl

Eac3LfeControl

False

When encoding 3/2 audio, controls whether the LFE channel is enabled

lfeFilter

Eac3LfeFilter

False

Applies a 120Hz lowpass filter to the LFE channel prior to encoding. Only valid with 3_2_LFE coding mode.

loRoCenterMixLevel

number

Format: float

Minimum: -60.0

Maximum: 3.0

False

Specify a value for the following Dolby Digital Plus setting: Left only/Right only center mix. MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix. Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs for the setting Coding mode. If you choose a different value for Coding mode, the service ignores Left only/Right only center.

loRoSurroundMixLevel

number

Format: float

Minimum: -60.0

Maximum: -1.5

False

Specify a value for the following Dolby Digital Plus setting: Left only/Right only. MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix. Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs for the setting Coding mode. If you choose a different value for Coding mode, the service ignores Left only/Right only surround.

ltRtCenterMixLevel

number

Format: float

Minimum: -60.0

Maximum: 3.0

False

Specify a value for the following Dolby Digital Plus setting: Left total/Right total center mix. MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix. Valid values: 3.0, 1.5, 0.0, -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs for the setting Coding mode. If you choose a different value for Coding mode, the service ignores Left total/Right total center.

ltRtSurroundMixLevel

number

Format: float

Minimum: -60.0

Maximum: -1.5

False

Specify a value for the following Dolby Digital Plus setting: Left total/Right total surround mix. MediaConvert uses this value for downmixing. How the service uses this value depends on the value that you choose for Stereo downmix. Valid values: -1.5, -3.0, -4.5, -6.0, and -60. The value -60 mutes the channel. This setting applies only if you keep the default value of 3/2 - L, R, C, Ls, Rs for the setting Coding mode. If you choose a different value for Coding mode, the service ignores Left total/Right total surround.

metadataControl

Eac3MetadataControl

False

When set to FOLLOW_INPUT, encoder metadata will be sourced from the DD, DD+, or DolbyE decoder that supplied this audio data. If audio was not supplied from one of these streams, then the static metadata settings will be used.

passthroughControl

Eac3PassthroughControl

False

When set to WHEN_POSSIBLE, input DD+ audio will be passed through if it is present on the input. this detection is dynamic over the life of the transcode. Inputs that alternate between DD+ and non-DD+ content will have a consistent DD+ output as the system alternates between passthrough and encoding.

phaseControl

Eac3PhaseControl

False

Controls the amount of phase-shift applied to the surround channels. Only used for 3/2 coding mode.

sampleRate

integer

Minimum: 48000

Maximum: 48000

False

This value is always 48000. It represents the sample rate in Hz.

stereoDownmix

Eac3StereoDownmix

False

Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs for the setting Coding mode. If you choose a different value for Coding mode, the service ignores Stereo downmix.

surroundExMode

Eac3SurroundExMode

False

When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.

surroundMode

Eac3SurroundMode

False

When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.

Eac3StereoDownmix

Choose how the service does stereo downmixing. This setting only applies if you keep the default value of 3/2 - L, R, C, Ls, Rs for the setting Coding mode. If you choose a different value for Coding mode, the service ignores Stereo downmix.

  • NOT_INDICATED

  • LO_RO

  • LT_RT

  • DPL2

Eac3SurroundExMode

When encoding 3/2 audio, sets whether an extra center back surround channel is matrix encoded into the left and right surround channels.

  • NOT_INDICATED

  • ENABLED

  • DISABLED

Eac3SurroundMode

When encoding 2/0 audio, sets whether Dolby Surround is matrix encoded into the two channels.

  • NOT_INDICATED

  • ENABLED

  • DISABLED

EmbeddedDestinationSettings

Settings related to CEA/EIA-608 and CEA/EIA-708 (also called embedded or ancillary) captions. Set up embedded captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/embedded-output-captions.html.

PropertyTypeRequiredDescription
destination608ChannelNumber

integer

Minimum: 1

Maximum: 4

False

Ignore this setting unless your input captions are SCC format and your output captions are embedded in the video stream. Specify a CC number for each captions channel in this output. If you have two channels, choose CC numbers that aren't in the same field. For example, choose 1 and 3. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.

destination708ServiceNumber

integer

Minimum: 1

Maximum: 6

False

Ignore this setting unless your input captions are SCC format and you want both 608 and 708 captions embedded in your output stream. Optionally, specify the 708 service number for each output captions channel. Choose a different number for each channel. To use this setting, also set Force 608 to 708 upconvert to Upconvert in your input captions selector settings. If you choose to upconvert but don't specify a 708 service number, MediaConvert uses the number that you specify for CC channel number for the 708 service number. For more information, see https://docs.aws.amazon.com/console/mediaconvert/dual-scc-to-embedded.

ExceptionBody

PropertyTypeRequiredDescription
message

string

False

F4vMoovPlacement

To place the MOOV atom at the beginning of your output, which is useful for progressive downloading: Leave blank or choose Progressive download. To place the MOOV at the end of your output: Choose Normal.

  • PROGRESSIVE_DOWNLOAD

  • NORMAL

F4vSettings

Settings for F4v container

PropertyTypeRequiredDescription
moovPlacement

F4vMoovPlacement

False

To place the MOOV atom at the beginning of your output, which is useful for progressive downloading: Leave blank or choose Progressive download. To place the MOOV at the end of your output: Choose Normal.

FlacSettings

Required when you set Codec, under AudioDescriptions>CodecSettings, to the value FLAC.

PropertyTypeRequiredDescription
bitDepth

integer

Minimum: 16

Maximum: 24

False

Specify Bit depth (BitDepth), in bits per sample, to choose the encoding quality for this audio track.

channels

integer

Minimum: 1

Maximum: 8

False

Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are between 1 and 8.

sampleRate

integer

Minimum: 22050

Maximum: 48000

False

Sample rate in Hz.

FontScript

Provide the font script, using an ISO 15924 script code, if the LanguageCode is not sufficient for determining the script type. Where LanguageCode or CustomLanguageCode is sufficient, use "AUTOMATIC" or leave unset.

  • AUTOMATIC

  • HANS

  • HANT

FrameCaptureSettings

Required when you set Codec to the value FRAME_CAPTURE.

PropertyTypeRequiredDescription
framerateDenominator

integer

Minimum: 1

Maximum: 2147483647

False

Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.n.jpg where n is the 0-based sequence number of each Capture.

framerateNumerator

integer

Minimum: 1

Maximum: 2147483647

False

Frame capture will encode the first frame of the output stream, then one frame every framerateDenominator/framerateNumerator seconds. For example, settings of framerateNumerator = 1 and framerateDenominator = 3 (a rate of 1/3 frame per second) will capture the first frame, then 1 frame every 3s. Files will be named as filename.NNNNNNN.jpg where N is the 0-based frame sequence number zero padded to 7 decimal places.

maxCaptures

integer

Minimum: 1

Maximum: 10000000

False

Maximum number of captures (encoded jpg output files).

quality

integer

Minimum: 1

Maximum: 100

False

JPEG Quality - a higher value equals higher quality.

H264AdaptiveQuantization

Keep the default value, Auto, for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto. Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization to Off. Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.

  • OFF

  • AUTO

  • LOW

  • MEDIUM

  • HIGH

  • HIGHER

  • MAX

H264CodecLevel

Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto.

  • AUTO

  • LEVEL_1

  • LEVEL_1_1

  • LEVEL_1_2

  • LEVEL_1_3

  • LEVEL_2

  • LEVEL_2_1

  • LEVEL_2_2

  • LEVEL_3

  • LEVEL_3_1

  • LEVEL_3_2

  • LEVEL_4

  • LEVEL_4_1

  • LEVEL_4_2

  • LEVEL_5

  • LEVEL_5_1

  • LEVEL_5_2

H264CodecProfile

H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.

  • BASELINE

  • HIGH

  • HIGH_10BIT

  • HIGH_422

  • HIGH_422_10BIT

  • MAIN

H264DynamicSubGop

Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames.

  • ADAPTIVE

  • STATIC

H264EndOfStreamMarkers

Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.

  • INCLUDE

  • SUPPRESS

H264EntropyEncoding

Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.

  • CABAC

  • CAVLC

H264FieldEncoding

The video encoding method for your MPEG-4 AVC output. Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field to disable PAFF encoding and create separate interlaced fields. Choose MBAFF to disable PAFF and have MediaConvert use MBAFF encoding for interlaced outputs.

  • PAFF

  • FORCE_FIELD

  • MBAFF

H264FlickerAdaptiveQuantization

Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled. Change this value to Enabled to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization to a value other than AUTO.

  • DISABLED

  • ENABLED

H264FramerateControl

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

H264FramerateConversionAlgorithm

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

  • DUPLICATE_DROP

  • INTERPOLATE

  • FRAMEFORMER

H264GopBReference

Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.

  • DISABLED

  • ENABLED

H264GopSizeUnits

Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.

  • FRAMES

  • SECONDS

  • AUTO

H264InterlaceMode

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

  • PROGRESSIVE

  • TOP_FIELD

  • BOTTOM_FIELD

  • FOLLOW_TOP_FIELD

  • FOLLOW_BOTTOM_FIELD

H264ParControl

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

H264QualityTuningLevel

The Quality tuning level you choose represents a trade-off between the encoding speed of your job and the output video quality. For the fastest encoding speed at the cost of video quality: Choose Single pass. For a good balance between encoding speed and video quality: Leave blank or keep the default value Single pass HQ. For the best video quality, at the cost of encoding speed: Choose Multi pass HQ. MediaConvert performs an analysis pass on your input followed by an encoding pass. Outputs that use this feature incur pro-tier pricing.

  • SINGLE_PASS

  • SINGLE_PASS_HQ

  • MULTI_PASS_HQ

H264QvbrSettings

Settings for quality-defined variable bitrate encoding with the H.264 codec. Use these settings only when you set QVBR for Rate control mode.

PropertyTypeRequiredDescription
maxAverageBitrate

integer

Minimum: 1000

Maximum: 1152000000

False

Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.

qvbrQualityLevel

integer

Minimum: 1

Maximum: 10

False

Use this setting only when you set Rate control mode to QVBR. Specify the target quality level for this output. MediaConvert determines the right number of bits to use for each part of the video to maintain the video quality that you specify. When you keep the default value, AUTO, MediaConvert picks a quality level for you, based on characteristics of your input video. If you prefer to specify a quality level, specify a number from 1 through 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.

qvbrQualityLevelFineTune

number

Format: float

Minimum: 0.0

Maximum: 1.0

False

Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.

H264RateControlMode

Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).

  • VBR

  • CBR

  • QVBR

H264RepeatPps

Places a PPS header on each encoded picture, even if repeated.

  • DISABLED

  • ENABLED

H264SaliencyAwareEncoding

Specify whether to apply Saliency aware encoding to your output. Use to improve the perceptual video quality of your output by allocating more encoding bits to the prominent or noticeable parts of your content. To apply saliency aware encoding, when possible: We recommend that you choose Preferred. The effects of Saliency aware encoding are best seen in lower bitrate outputs. When you choose Preferred, note that Saliency aware encoding will only apply to outputs that are 720p or higher in resolution. To not apply saliency aware encoding, prioritizing encoding speed over perceptual video quality: Choose Disabled.

  • DISABLED

  • PREFERRED

H264ScanTypeConversionMode

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

  • INTERLACED

  • INTERLACED_OPTIMIZE

H264SceneChangeDetect

Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.

  • DISABLED

  • ENABLED

  • TRANSITION_DETECTION

H264Settings

Required when you set Codec to the value H_264.

PropertyTypeRequiredDescription
adaptiveQuantization

H264AdaptiveQuantization

False

Keep the default value, Auto, for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set H264AdaptiveQuantization to a value other than Auto. Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization to Off. Related settings: The value that you choose here applies to the following settings: H264FlickerAdaptiveQuantization, H264SpatialAdaptiveQuantization, and H264TemporalAdaptiveQuantization.

bandwidthReductionFilter

BandwidthReductionFilter

False

The Bandwidth reduction filter increases the video quality of your output relative to its bitrate. Use to lower the bitrate of your constant quality QVBR output, with little or no perceptual decrease in quality. Or, use to increase the video quality of outputs with other rate control modes relative to the bitrate that you specify. Bandwidth reduction increases further when your input is low quality or noisy. Outputs that use this feature incur pro-tier pricing. When you include Bandwidth reduction filter, you cannot include the Noise reducer preprocessor.

bitrate

integer

Minimum: 1000

Maximum: 1152000000

False

Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.

codecLevel

H264CodecLevel

False

Specify an H.264 level that is consistent with your output video settings. If you aren't sure what level to specify, choose Auto.

codecProfile

H264CodecProfile

False

H.264 Profile. High 4:2:2 and 10-bit profiles are only available with the AVC-I License.

dynamicSubGop

H264DynamicSubGop

False

Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.

endOfStreamMarkers

H264EndOfStreamMarkers

False

Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.

entropyEncoding

H264EntropyEncoding

False

Entropy encoding mode. Use CABAC (must be in Main or High profile) or CAVLC.

fieldEncoding

H264FieldEncoding

False

The video encoding method for your MPEG-4 AVC output. Keep the default value, PAFF, to have MediaConvert use PAFF encoding for interlaced outputs. Choose Force field to disable PAFF encoding and create separate interlaced fields. Choose MBAFF to disable PAFF and have MediaConvert use MBAFF encoding for interlaced outputs.

flickerAdaptiveQuantization

H264FlickerAdaptiveQuantization

False

Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264FlickerAdaptiveQuantization is Disabled. Change this value to Enabled to reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. To manually enable or disable H264FlickerAdaptiveQuantization, you must set Adaptive quantization to a value other than AUTO.

framerateControl

H264FramerateControl

False

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

framerateConversionAlgorithm

H264FramerateConversionAlgorithm

False

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

framerateDenominator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

framerateNumerator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

gopBReference

H264GopBReference

False

Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.

gopClosedCadence

integer

Minimum: 0

Maximum: 2147483647

False

Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. In the console, do this by keeping the default empty value. If you do explicitly specify a value, for segmented outputs, don't set this value to 0.

gopSize

number

Format: float

Minimum: 0.0

False

Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds. Specify the GOP length using a whole number of frames or a decimal value of seconds. MediaConvert will interpret this value as frames or seconds depending on the value you choose for GOP mode control. If you want to allow MediaConvert to automatically determine GOP size, leave GOP size blank and set GOP mode control to Auto. If your output group specifies HLS, DASH, or CMAF, leave GOP size blank and set GOP mode control to Auto in each output in your output group.

gopSizeUnits

H264GopSizeUnits

False

Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.

hrdBufferFinalFillPercentage

integer

Minimum: 0

Maximum: 100

False

If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.

hrdBufferInitialFillPercentage

integer

Minimum: 0

Maximum: 100

False

Percentage of the buffer that should initially be filled (HRD buffer model).

hrdBufferSize

integer

Minimum: 0

Maximum: 1152000000

False

Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

interlaceMode

H264InterlaceMode

False

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

maxBitrate

integer

Minimum: 1000

Maximum: 1152000000

False

Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.

minIInterval

integer

Minimum: 0

Maximum: 30

False

Specify the minimum number of frames allowed between two IDR-frames in your output. This includes frames created at the start of a GOP or a scene change. Use Min I-Interval to improve video compression by varying GOP size when two IDR-frames would be created near each other. For example, if a regular cadence-driven IDR-frame would fall within 5 frames of a scene-change IDR-frame, and you set Min I-interval to 5, then the encoder would only write an IDR-frame for the scene-change. In this way, one GOP is shortened or extended. If a cadence-driven IDR-frame would be further than 5 frames from a scene-change IDR-frame, then the encoder leaves all IDR-frames in place. To use an automatically determined interval: We recommend that you keep this value blank. This allows for MediaConvert to use an optimal setting according to the characteristics of your input video, and results in better video compression. To manually specify an interval: Enter a value from 1 to 30. Use when your downstream systems have specific GOP size requirements. To disable GOP size variance: Enter 0. MediaConvert will only create IDR-frames at the start of your output's cadence-driven GOP. Use when your downstream systems require a regular GOP size.

numberBFramesBetweenReferenceFrames

integer

Minimum: 0

Maximum: 7

False

Specify the number of B-frames between reference frames in this output. For the best video quality: Leave blank. MediaConvert automatically determines the number of B-frames to use based on the characteristics of your input video. To manually specify the number of B-frames between reference frames: Enter an integer from 0 to 7.

numberReferenceFrames

integer

Minimum: 1

Maximum: 6

False

Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.

parControl

H264ParControl

False

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

parDenominator

integer

Minimum: 1

Maximum: 2147483647

False

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

parNumerator

integer

Minimum: 1

Maximum: 2147483647

False

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

qualityTuningLevel

H264QualityTuningLevel

False

The Quality tuning level you choose represents a trade-off between the encoding speed of your job and the output video quality. For the fastest encoding speed at the cost of video quality: Choose Single pass. For a good balance between encoding speed and video quality: Leave blank or keep the default value Single pass HQ. For the best video quality, at the cost of encoding speed: Choose Multi pass HQ. MediaConvert performs an analysis pass on your input followed by an encoding pass. Outputs that use this feature incur pro-tier pricing.

qvbrSettings

H264QvbrSettings

False

Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.

rateControlMode

H264RateControlMode

False

Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).

repeatPps

H264RepeatPps

False

Places a PPS header on each encoded picture, even if repeated.

saliencyAwareEncoding

H264SaliencyAwareEncoding

False

Specify whether to apply Saliency aware encoding to your output. Use to improve the perceptual video quality of your output by allocating more encoding bits to the prominent or noticeable parts of your content. To apply saliency aware encoding, when possible: We recommend that you choose Preferred. The effects of Saliency aware encoding are best seen in lower bitrate outputs. When you choose Preferred, note that Saliency aware encoding will only apply to outputs that are 720p or higher in resolution. To not apply saliency aware encoding, prioritizing encoding speed over perceptual video quality: Choose Disabled.

scanTypeConversionMode

H264ScanTypeConversionMode

False

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

sceneChangeDetect

H264SceneChangeDetect

False

Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.

slices

integer

Minimum: 1

Maximum: 32

False

Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.

slowPal

H264SlowPal

False

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

softness

integer

Minimum: 0

Maximum: 128

False

Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness or by enabling a noise reducer filter. The Softness setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.

spatialAdaptiveQuantization

H264SpatialAdaptiveQuantization

False

Only use this setting when you change the default value, Auto, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled. Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization to a value other than AUTO.

syntax

H264Syntax

False

Produces a bitstream compliant with SMPTE RP-2027.

telecine

H264Telecine

False

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine produces a 29.97i output. Soft telecine produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None, MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

temporalAdaptiveQuantization

H264TemporalAdaptiveQuantization

False

Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled. Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization. To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization to a value other than AUTO.

unregisteredSeiTimecode

H264UnregisteredSeiTimecode

False

Inserts timecode for each frame as 4 bytes of an unregistered SEI message.

H264SlowPal

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

  • DISABLED

  • ENABLED

H264SpatialAdaptiveQuantization

Only use this setting when you change the default value, Auto, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264SpatialAdaptiveQuantization is Enabled. Keep this default value to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to set H264SpatialAdaptiveQuantization to Disabled. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher. To manually enable or disable H264SpatialAdaptiveQuantization, you must set Adaptive quantization to a value other than AUTO.

  • DISABLED

  • ENABLED

H264Syntax

Produces a bitstream compliant with SMPTE RP-2027.

  • DEFAULT

  • RP2027

H264Telecine

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine produces a 29.97i output. Soft telecine produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None, MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

  • NONE

  • SOFT

  • HARD

H264TemporalAdaptiveQuantization

Only use this setting when you change the default value, AUTO, for the setting H264AdaptiveQuantization. When you keep all defaults, excluding H264AdaptiveQuantization and all other adaptive quantization from your JSON job specification, MediaConvert automatically applies the best types of quantization for your video content. When you set H264AdaptiveQuantization to a value other than AUTO, the default value for H264TemporalAdaptiveQuantization is Enabled. Keep this default value to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to set H264TemporalAdaptiveQuantization to Disabled. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization. To manually enable or disable H264TemporalAdaptiveQuantization, you must set Adaptive quantization to a value other than AUTO.

  • DISABLED

  • ENABLED

H264UnregisteredSeiTimecode

Inserts timecode for each frame as 4 bytes of an unregistered SEI message.

  • DISABLED

  • ENABLED

H265AdaptiveQuantization

When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.

  • OFF

  • LOW

  • MEDIUM

  • HIGH

  • HIGHER

  • MAX

  • AUTO

H265AlternateTransferFunctionSei

Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).

  • DISABLED

  • ENABLED

H265CodecLevel

H.265 Level.

  • AUTO

  • LEVEL_1

  • LEVEL_2

  • LEVEL_2_1

  • LEVEL_3

  • LEVEL_3_1

  • LEVEL_4

  • LEVEL_4_1

  • LEVEL_5

  • LEVEL_5_1

  • LEVEL_5_2

  • LEVEL_6

  • LEVEL_6_1

  • LEVEL_6_2

H265CodecProfile

Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.

  • MAIN_MAIN

  • MAIN_HIGH

  • MAIN10_MAIN

  • MAIN10_HIGH

  • MAIN_422_8BIT_MAIN

  • MAIN_422_8BIT_HIGH

  • MAIN_422_10BIT_MAIN

  • MAIN_422_10BIT_HIGH

H265DynamicSubGop

Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames.

  • ADAPTIVE

  • STATIC

H265EndOfStreamMarkers

Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.

  • INCLUDE

  • SUPPRESS

H265FlickerAdaptiveQuantization

Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.

  • DISABLED

  • ENABLED

H265FramerateControl

Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

H265FramerateConversionAlgorithm

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

  • DUPLICATE_DROP

  • INTERPOLATE

  • FRAMEFORMER

H265GopBReference

Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.

  • DISABLED

  • ENABLED

H265GopSizeUnits

Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.

  • FRAMES

  • SECONDS

  • AUTO

H265InterlaceMode

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

  • PROGRESSIVE

  • TOP_FIELD

  • BOTTOM_FIELD

  • FOLLOW_TOP_FIELD

  • FOLLOW_BOTTOM_FIELD

H265ParControl

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

H265QualityTuningLevel

Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.

  • SINGLE_PASS

  • SINGLE_PASS_HQ

  • MULTI_PASS_HQ

H265QvbrSettings

Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.

PropertyTypeRequiredDescription
maxAverageBitrate

integer

Minimum: 1000

Maximum: 1466400000

False

Use this setting only when Rate control mode is QVBR and Quality tuning level is Multi-pass HQ. For Max average bitrate values suited to the complexity of your input video, the service limits the average bitrate of the video part of this output to the value that you choose. That is, the total size of the video element is less than or equal to the value you set multiplied by the number of seconds of encoded output.

qvbrQualityLevel

integer

Minimum: 1

Maximum: 10

False

Use this setting only when you set Rate control mode to QVBR. Specify the target quality level for this output. MediaConvert determines the right number of bits to use for each part of the video to maintain the video quality that you specify. When you keep the default value, AUTO, MediaConvert picks a quality level for you, based on characteristics of your input video. If you prefer to specify a quality level, specify a number from 1 through 10. Use higher numbers for greater quality. Level 10 results in nearly lossless compression. The quality level for most broadcast-quality transcodes is between 6 and 9. Optionally, to specify a value between whole numbers, also provide a value for the setting qvbrQualityLevelFineTune. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33.

qvbrQualityLevelFineTune

number

Format: float

Minimum: 0.0

Maximum: 1.0

False

Optional. Specify a value here to set the QVBR quality to a level that is between whole numbers. For example, if you want your QVBR quality level to be 7.33, set qvbrQualityLevel to 7 and set qvbrQualityLevelFineTune to .33. MediaConvert rounds your QVBR quality level to the nearest third of a whole number. For example, if you set qvbrQualityLevel to 7 and you set qvbrQualityLevelFineTune to .25, your actual QVBR quality level is 7.33.

H265RateControlMode

Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).

  • VBR

  • CBR

  • QVBR

H265SampleAdaptiveOffsetFilterMode

Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content

  • DEFAULT

  • ADAPTIVE

  • OFF

H265ScanTypeConversionMode

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

  • INTERLACED

  • INTERLACED_OPTIMIZE

H265SceneChangeDetect

Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.

  • DISABLED

  • ENABLED

  • TRANSITION_DETECTION

H265Settings

Settings for H265 codec

PropertyTypeRequiredDescription
adaptiveQuantization

H265AdaptiveQuantization

False

When you set Adaptive Quantization to Auto, or leave blank, MediaConvert automatically applies quantization to improve the video quality of your output. Set Adaptive Quantization to Low, Medium, High, Higher, or Max to manually control the strength of the quantization filter. When you do, you can specify a value for Spatial Adaptive Quantization, Temporal Adaptive Quantization, and Flicker Adaptive Quantization, to further control the quantization filter. Set Adaptive Quantization to Off to apply no quantization to your output.

alternateTransferFunctionSei

H265AlternateTransferFunctionSei

False

Enables Alternate Transfer Function SEI message for outputs using Hybrid Log Gamma (HLG) Electro-Optical Transfer Function (EOTF).

bandwidthReductionFilter

BandwidthReductionFilter

False

The Bandwidth reduction filter increases the video quality of your output relative to its bitrate. Use to lower the bitrate of your constant quality QVBR output, with little or no perceptual decrease in quality. Or, use to increase the video quality of outputs with other rate control modes relative to the bitrate that you specify. Bandwidth reduction increases further when your input is low quality or noisy. Outputs that use this feature incur pro-tier pricing. When you include Bandwidth reduction filter, you cannot include the Noise reducer preprocessor.

bitrate

integer

Minimum: 1000

Maximum: 1466400000

False

Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.

codecLevel

H265CodecLevel

False

H.265 Level.

codecProfile

H265CodecProfile

False

Represents the Profile and Tier, per the HEVC (H.265) specification. Selections are grouped as [Profile] / [Tier], so "Main/High" represents Main Profile with High Tier. 4:2:2 profiles are only available with the HEVC 4:2:2 License.

dynamicSubGop

H265DynamicSubGop

False

Specify whether to allow the number of B-frames in your output GOP structure to vary or not depending on your input video content. To improve the subjective video quality of your output that has high-motion content: Leave blank or keep the default value Adaptive. MediaConvert will use fewer B-frames for high-motion video content than low-motion content. The maximum number of B- frames is limited by the value that you choose for B-frames between reference frames. To use the same number B-frames for all types of content: Choose Static.

endOfStreamMarkers

H265EndOfStreamMarkers

False

Optionally include or suppress markers at the end of your output that signal the end of the video stream. To include end of stream markers: Leave blank or keep the default value, Include. To not include end of stream markers: Choose Suppress. This is useful when your output will be inserted into another stream.

flickerAdaptiveQuantization

H265FlickerAdaptiveQuantization

False

Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set adaptiveQuantization to a value other than Off.

framerateControl

H265FramerateControl

False

Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

framerateConversionAlgorithm

H265FramerateConversionAlgorithm

False

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

framerateDenominator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

framerateNumerator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

gopBReference

H265GopBReference

False

Specify whether to allow B-frames to be referenced by other frame types. To use reference B-frames when your GOP structure has 1 or more B-frames: Leave blank or keep the default value Enabled. We recommend that you choose Enabled to help improve the video quality of your output relative to its bitrate. To not use reference B-frames: Choose Disabled.

gopClosedCadence

integer

Minimum: 0

Maximum: 2147483647

False

Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, do this by keeping the default empty value. If you do explicitly specify a value, for segmented outputs, don't set this value to 0.

gopSize

number

Format: float

Minimum: 0.0

False

Use this setting only when you set GOP mode control to Specified, frames or Specified, seconds. Specify the GOP length using a whole number of frames or a decimal value of seconds. MediaConvert will interpret this value as frames or seconds depending on the value you choose for GOP mode control. If you want to allow MediaConvert to automatically determine GOP size, leave GOP size blank and set GOP mode control to Auto. If your output group specifies HLS, DASH, or CMAF, leave GOP size blank and set GOP mode control to Auto in each output in your output group.

gopSizeUnits

H265GopSizeUnits

False

Specify how the transcoder determines GOP size for this output. We recommend that you have the transcoder automatically choose this value for you based on characteristics of your input video. To enable this automatic behavior, choose Auto and and leave GOP size blank. By default, if you don't specify GOP mode control, MediaConvert will use automatic behavior. If your output group specifies HLS, DASH, or CMAF, set GOP mode control to Auto and leave GOP size blank in each output in your output group. To explicitly specify the GOP length, choose Specified, frames or Specified, seconds and then provide the GOP length in the related setting GOP size.

hrdBufferFinalFillPercentage

integer

Minimum: 0

Maximum: 100

False

If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.

hrdBufferInitialFillPercentage

integer

Minimum: 0

Maximum: 100

False

Percentage of the buffer that should initially be filled (HRD buffer model).

hrdBufferSize

integer

Minimum: 0

Maximum: 1466400000

False

Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

interlaceMode

H265InterlaceMode

False

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

maxBitrate

integer

Minimum: 1000

Maximum: 1466400000

False

Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. Required when Rate control mode is QVBR.

minIInterval

integer

Minimum: 0

Maximum: 30

False

Specify the minimum number of frames allowed between two IDR-frames in your output. This includes frames created at the start of a GOP or a scene change. Use Min I-Interval to improve video compression by varying GOP size when two IDR-frames would be created near each other. For example, if a regular cadence-driven IDR-frame would fall within 5 frames of a scene-change IDR-frame, and you set Min I-interval to 5, then the encoder would only write an IDR-frame for the scene-change. In this way, one GOP is shortened or extended. If a cadence-driven IDR-frame would be further than 5 frames from a scene-change IDR-frame, then the encoder leaves all IDR-frames in place. To use an automatically determined interval: We recommend that you keep this value blank. This allows for MediaConvert to use an optimal setting according to the characteristics of your input video, and results in better video compression. To manually specify an interval: Enter a value from 1 to 30. Use when your downstream systems have specific GOP size requirements. To disable GOP size variance: Enter 0. MediaConvert will only create IDR-frames at the start of your output's cadence-driven GOP. Use when your downstream systems require a regular GOP size.

numberBFramesBetweenReferenceFrames

integer

Minimum: 0

Maximum: 7

False

Specify the number of B-frames between reference frames in this output. For the best video quality: Leave blank. MediaConvert automatically determines the number of B-frames to use based on the characteristics of your input video. To manually specify the number of B-frames between reference frames: Enter an integer from 0 to 7.

numberReferenceFrames

integer

Minimum: 1

Maximum: 6

False

Number of reference frames to use. The encoder may use more than requested if using B-frames and/or interlaced encoding.

parControl

H265ParControl

False

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

parDenominator

integer

Minimum: 1

Maximum: 2147483647

False

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

parNumerator

integer

Minimum: 1

Maximum: 2147483647

False

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

qualityTuningLevel

H265QualityTuningLevel

False

Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.

qvbrSettings

H265QvbrSettings

False

Settings for quality-defined variable bitrate encoding with the H.265 codec. Use these settings only when you set QVBR for Rate control mode.

rateControlMode

H265RateControlMode

False

Use this setting to specify whether this output has a variable bitrate (VBR), constant bitrate (CBR) or quality-defined variable bitrate (QVBR).

sampleAdaptiveOffsetFilterMode

H265SampleAdaptiveOffsetFilterMode

False

Specify Sample Adaptive Offset (SAO) filter strength. Adaptive mode dynamically selects best strength based on content

scanTypeConversionMode

H265ScanTypeConversionMode

False

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

sceneChangeDetect

H265SceneChangeDetect

False

Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default. If this output uses QVBR, choose Transition detection for further video quality improvement. For more information about QVBR, see https://docs.aws.amazon.com/console/mediaconvert/cbr-vbr-qvbr.

slices

integer

Minimum: 1

Maximum: 32

False

Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.

slowPal

H265SlowPal

False

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

spatialAdaptiveQuantization

H265SpatialAdaptiveQuantization

False

Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.

telecine

H265Telecine

False

This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.

temporalAdaptiveQuantization

H265TemporalAdaptiveQuantization

False

Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.

temporalIds

H265TemporalIds

False

Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.

tiles

H265Tiles

False

Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.

unregisteredSeiTimecode

H265UnregisteredSeiTimecode

False

Inserts timecode for each frame as 4 bytes of an unregistered SEI message.

writeMp4PackagingType

H265WriteMp4PackagingType

False

If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.

H265SlowPal

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

  • DISABLED

  • ENABLED

H265SpatialAdaptiveQuantization

Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.

  • DISABLED

  • ENABLED

H265Telecine

This field applies only if the Streams > Advanced > Framerate field is set to 29.970. This field works with the Streams > Advanced > Preprocessors > Deinterlacer field and the Streams > Advanced > Interlaced Mode field to identify the scan type for the output: Progressive, Interlaced, Hard Telecine or Soft Telecine. - Hard: produces 29.97i output from 23.976 input. - Soft: produces 23.976; the player converts this output to 29.97i.

  • NONE

  • SOFT

  • HARD

H265TemporalAdaptiveQuantization

Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.

  • DISABLED

  • ENABLED

H265TemporalIds

Enables temporal layer identifiers in the encoded bitstream. Up to 3 layers are supported depending on GOP structure: I- and P-frames form one layer, reference B-frames can form a second layer and non-reference b-frames can form a third layer. Decoders can optionally decode only the lower temporal layers to generate a lower frame rate output. For example, given a bitstream with temporal IDs and with b-frames = 1 (i.e. IbPbPb display order), a decoder could decode all the frames for full frame rate output or only the I and P frames (lowest temporal layer) for a half frame rate output.

  • DISABLED

  • ENABLED

H265Tiles

Enable use of tiles, allowing horizontal as well as vertical subdivision of the encoded pictures.

  • DISABLED

  • ENABLED

H265UnregisteredSeiTimecode

Inserts timecode for each frame as 4 bytes of an unregistered SEI message.

  • DISABLED

  • ENABLED

H265WriteMp4PackagingType

If the location of parameter set NAL units doesn't matter in your workflow, ignore this setting. Use this setting only with CMAF or DASH outputs, or with standalone file outputs in an MPEG-4 container (MP4 outputs). Choose HVC1 to mark your output as HVC1. This makes your output compliant with the following specification: ISO IECJTC1 SC29 N13798 Text ISO/IEC FDIS 14496-15 3rd Edition. For these outputs, the service stores parameter set NAL units in the sample headers but not in the samples directly. For MP4 outputs, when you choose HVC1, your output video might not work properly with some downstream systems and video players. The service defaults to marking your output as HEV1. For these outputs, the service writes parameter set NAL units directly into the samples.

  • HVC1

  • HEV1

HDRToSDRToneMapper

Specify how MediaConvert maps brightness and colors from your HDR input to your SDR output. The mode that you select represents a creative choice, with different tradeoffs in the details and tones of your output. To maintain details in bright or saturated areas of your output: Choose Preserve details. For some sources, your SDR output may look less bright and less saturated when compared to your HDR source. MediaConvert automatically applies this mode for HLG sources, regardless of your choice. For a bright and saturated output: Choose Vibrant. We recommend that you choose this mode when any of your source content is HDR10, and for the best results when it is mastered for 1000 nits. You may notice loss of details in bright or saturated areas of your output. HDR to SDR tone mapping has no effect when your input is SDR.

  • PRESERVE_DETAILS

  • VIBRANT

Hdr10Metadata

Use these settings to specify static color calibration metadata, as defined by SMPTE ST 2086. These values don't affect the pixel values that are encoded in the video stream. They are intended to help the downstream video player display content in a way that reflects the intentions of the the content creator.

PropertyTypeRequiredDescription
bluePrimaryX

integer

Minimum: 0

Maximum: 50000

False

HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.

bluePrimaryY

integer

Minimum: 0

Maximum: 50000

False

HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.

greenPrimaryX

integer

Minimum: 0

Maximum: 50000

False

HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.

greenPrimaryY

integer

Minimum: 0

Maximum: 50000

False

HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.

maxContentLightLevel

integer

Minimum: 0

Maximum: 65535

False

Maximum light level among all samples in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.

maxFrameAverageLightLevel

integer

Minimum: 0

Maximum: 65535

False

Maximum average light level of any frame in the coded video sequence, in units of candelas per square meter. This setting doesn't have a default value; you must specify a value that is suitable for the content.

maxLuminance

integer

Minimum: 0

Maximum: 2147483647

False

Nominal maximum mastering display luminance in units of of 0.0001 candelas per square meter.

minLuminance

integer

Minimum: 0

Maximum: 2147483647

False

Nominal minimum mastering display luminance in units of of 0.0001 candelas per square meter

redPrimaryX

integer

Minimum: 0

Maximum: 50000

False

HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.

redPrimaryY

integer

Minimum: 0

Maximum: 50000

False

HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.

whitePointX

integer

Minimum: 0

Maximum: 50000

False

HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.

whitePointY

integer

Minimum: 0

Maximum: 50000

False

HDR Master Display Information must be provided by a color grader, using color grading tools. Range is 0 to 50,000, each increment represents 0.00002 in CIE1931 color coordinate. Note that this setting is not for color correction.

Hdr10Plus

Setting for HDR10+ metadata insertion

PropertyTypeRequiredDescription
masteringMonitorNits

integer

Minimum: 0

Maximum: 4000

False

Specify the HDR10+ mastering display normalized peak luminance, in nits. This is the normalized actual peak luminance of the mastering display, as defined by ST 2094-40.

targetMonitorNits

integer

Minimum: 0

Maximum: 4000

False

Specify the HDR10+ target display nominal peak luminance, in nits. This is the nominal maximum luminance of the target display as defined by ST 2094-40.

ImageInserter

Use the image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each input or output individually. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/graphic-overlay.html. This setting is disabled by default.

PropertyTypeRequiredDescription
insertableImages

Array of type InsertableImage

False

Specify the images that you want to overlay on your video. The images must be PNG or TGA files.

sdrReferenceWhiteLevel

integer

Minimum: 100

Maximum: 1000

False

Specify the reference white level, in nits, for all of your image inserter images. Use to correct brightness levels within HDR10 outputs. For 1,000 nit peak brightness displays, we recommend that you set SDR reference white level to 203 (according to ITU-R BT.2408). Leave blank to use the default value of 100, or specify an integer from 100 to 1000.

ImscAccessibilitySubs

If the IMSC captions track is intended to provide accessibility for people who are deaf or hard of hearing: Set Accessibility subtitles to Enabled. When you do, MediaConvert adds accessibility attributes to your output HLS or DASH manifest. For HLS manifests, MediaConvert adds the following accessibility attributes under EXT-X-MEDIA for this track: CHARACTERISTICS="public.accessibility.describes-spoken-dialog,public.accessibility.describes-music-and-sound" and AUTOSELECT="YES". For DASH manifests, MediaConvert adds the following in the adaptation set for this track: <Accessibility schemeIdUri="urn:mpeg:dash:role:2011" value="caption"/>. If the captions track is not intended to provide such accessibility: Keep the default value, Disabled. When you do, for DASH manifests, MediaConvert instead adds the following in the adaptation set for this track: <Role schemeIDUri="urn:mpeg:dash:role:2011" value="subtitle"/>.

  • DISABLED

  • ENABLED

ImscDestinationSettings

Settings related to IMSC captions. IMSC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html.

PropertyTypeRequiredDescription
accessibility

ImscAccessibilitySubs

False

If the IMSC captions track is intended to provide accessibility for people who are deaf or hard of hearing: Set Accessibility subtitles to Enabled. When you do, MediaConvert adds accessibility attributes to your output HLS or DASH manifest. For HLS manifests, MediaConvert adds the following accessibility attributes under EXT-X-MEDIA for this track: CHARACTERISTICS="public.accessibility.describes-spoken-dialog,public.accessibility.describes-music-and-sound" and AUTOSELECT="YES". For DASH manifests, MediaConvert adds the following in the adaptation set for this track: <Accessibility schemeIdUri="urn:mpeg:dash:role:2011" value="caption"/>. If the captions track is not intended to provide such accessibility: Keep the default value, Disabled. When you do, for DASH manifests, MediaConvert instead adds the following in the adaptation set for this track: <Role schemeIDUri="urn:mpeg:dash:role:2011" value="subtitle"/>.

stylePassthrough

ImscStylePassthrough

False

Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.

ImscStylePassthrough

Keep this setting enabled to have MediaConvert use the font style and position information from the captions source in the output. This option is available only when your input captions are IMSC, SMPTE-TT, or TTML. Disable this setting for simplified output captions.

  • ENABLED

  • DISABLED

InsertableImage

These settings apply to a specific graphic overlay. You can include multiple overlays in your job.

PropertyTypeRequiredDescription
duration

integer

Minimum: 0

Maximum: 2147483647

False

Specify the time, in milliseconds, for the image to remain on the output video. This duration includes fade-in time but not fade-out time.

fadeIn

integer

Minimum: 0

Maximum: 2147483647

False

Specify the length of time, in milliseconds, between the Start time that you specify for the image insertion and the time that the image appears at full opacity. Full opacity is the level that you specify for the opacity setting. If you don't specify a value for Fade-in, the image will appear abruptly at the overlay start time.

fadeOut

integer

Minimum: 0

Maximum: 2147483647

False

Specify the length of time, in milliseconds, between the end of the time that you have specified for the image overlay Duration and when the overlaid image has faded to total transparency. If you don't specify a value for Fade-out, the image will disappear abruptly at the end of the inserted image duration.

height

integer

Minimum: 0

Maximum: 2147483647

False

Specify the height of the inserted image in pixels. If you specify a value that's larger than the video resolution height, the service will crop your overlaid image to fit. To use the native height of the image, keep this setting blank.

imageInserterInput

string

Pattern: ^((s3://(.*?)\.(bmp|BMP|png|PNG|tga|TGA))|(https?://(.*?)\.(bmp|BMP|png|PNG|tga|TGA)(\?([^&=]+=[^&]+&)*[^&=]+=[^&]+)?))$

MinLength: 14

False

Specify the HTTP, HTTPS, or Amazon S3 location of the image that you want to overlay on the video. Use a PNG or TGA file.

imageX

integer

Minimum: 0

Maximum: 2147483647

False

Specify the distance, in pixels, between the inserted image and the left edge of the video frame. Required for any image overlay that you specify.

imageY

integer

Minimum: 0

Maximum: 2147483647

False

Specify the distance, in pixels, between the overlaid image and the top edge of the video frame. Required for any image overlay that you specify.

layer

integer

Minimum: 0

Maximum: 99

False

Specify how overlapping inserted images appear. Images with higher values for Layer appear on top of images with lower values for Layer.

opacity

integer

Minimum: 0

Maximum: 100

False

Use Opacity to specify how much of the underlying video shows through the inserted image. 0 is transparent and 100 is fully opaque. Default is 50.

startTime

string

Pattern: ^((([0-1]\d)|(2[0-3]))(:[0-5]\d){2}([:;][0-5]\d))$

False

Specify the timecode of the frame that you want the overlay to first appear on. This must be in timecode (HH:MM:SS:FF or HH:MM:SS;FF) format. Remember to take into account your timecode source settings.

width

integer

Minimum: 0

Maximum: 2147483647

False

Specify the width of the inserted image in pixels. If you specify a value that's larger than the video resolution width, the service will crop your overlaid image to fit. To use the native width of the image, keep this setting blank.

LanguageCode

Specify the language, using the ISO 639-2 three-letter code listed at https://www.loc.gov/standards/iso639-2/php/code_list.php.

  • ENG

  • SPA

  • FRA

  • DEU

  • GER

  • ZHO

  • ARA

  • HIN

  • JPN

  • RUS

  • POR

  • ITA

  • URD

  • VIE

  • KOR

  • PAN

  • ABK

  • AAR

  • AFR

  • AKA

  • SQI

  • AMH

  • ARG

  • HYE

  • ASM

  • AVA

  • AVE

  • AYM

  • AZE

  • BAM

  • BAK

  • EUS

  • BEL

  • BEN

  • BIH

  • BIS

  • BOS

  • BRE

  • BUL

  • MYA

  • CAT

  • KHM

  • CHA

  • CHE

  • NYA

  • CHU

  • CHV

  • COR

  • COS

  • CRE

  • HRV

  • CES

  • DAN

  • DIV

  • NLD

  • DZO

  • ENM

  • EPO

  • EST

  • EWE

  • FAO

  • FIJ

  • FIN

  • FRM

  • FUL

  • GLA

  • GLG

  • LUG

  • KAT

  • ELL

  • GRN

  • GUJ

  • HAT

  • HAU

  • HEB

  • HER

  • HMO

  • HUN

  • ISL

  • IDO

  • IBO

  • IND

  • INA

  • ILE

  • IKU

  • IPK

  • GLE

  • JAV

  • KAL

  • KAN

  • KAU

  • KAS

  • KAZ

  • KIK

  • KIN

  • KIR

  • KOM

  • KON

  • KUA

  • KUR

  • LAO

  • LAT

  • LAV

  • LIM

  • LIN

  • LIT

  • LUB

  • LTZ

  • MKD

  • MLG

  • MSA

  • MAL

  • MLT

  • GLV

  • MRI

  • MAR

  • MAH

  • MON

  • NAU

  • NAV

  • NDE

  • NBL

  • NDO

  • NEP

  • SME

  • NOR

  • NOB

  • NNO

  • OCI

  • OJI

  • ORI

  • ORM

  • OSS

  • PLI

  • FAS

  • POL

  • PUS

  • QUE

  • QAA

  • RON

  • ROH

  • RUN

  • SMO

  • SAG

  • SAN

  • SRD

  • SRB

  • SNA

  • III

  • SND

  • SIN

  • SLK

  • SLV

  • SOM

  • SOT

  • SUN

  • SWA

  • SSW

  • SWE

  • TGL

  • TAH

  • TGK

  • TAM

  • TAT

  • TEL

  • THA

  • BOD

  • TIR

  • TON

  • TSO

  • TSN

  • TUR

  • TUK

  • TWI

  • UIG

  • UKR

  • UZB

  • VEN

  • VOL

  • WLN

  • CYM

  • FRY

  • WOL

  • XHO

  • YID

  • YOR

  • ZHA

  • ZUL

  • ORJ

  • QPC

  • TNG

  • SRP

ListPresetsRequest

You can send list presets requests with an empty body. Optionally, you can filter the response by category by specifying it in your request body. You can also optionally specify the maximum number, up to twenty, of queues to be returned.

PropertyTypeRequiredDescription
category

string

False

Optionally, specify a preset category to limit responses to only presets from that category.

listBy

PresetListBy

False

Optional. When you request a list of presets, you can choose to list them alphabetically by NAME or chronologically by CREATION_DATE. If you don't specify, the service will list them by name.

maxResults

integer

Format: int32

Minimum: 1

Maximum: 20

False

Optional. Number of presets, up to twenty, that will be returned at one time

nextToken

string

False

Use this string, provided with the response to a previous request, to request the next batch of presets.

order

Order

False

Optional. When you request lists of resources, you can specify whether they are sorted in ASCENDING or DESCENDING order. Default varies by resource.

ListPresetsResponse

Successful list presets requests return a JSON array of presets. If you don't specify how they are ordered, you will receive them alphabetically by name.

PropertyTypeRequiredDescription
nextToken

string

False

Use this string to request the next batch of presets.

presets

Array of type Preset

False

List of presets

M2tsAudioBufferModel

Selects between the DVB and ATSC buffer models for Dolby Digital audio.

  • DVB

  • ATSC

M2tsAudioDuration

Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration. In all other cases, keep the default value, Default codec duration. When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.

  • DEFAULT_CODEC_DURATION

  • MATCH_VIDEO_DURATION

M2tsBufferModel

Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.

  • MULTIPLEX

  • NONE

M2tsDataPtsControl

If you select ALIGN_TO_VIDEO, MediaConvert writes captions and data packets with Presentation Timestamp (PTS) values greater than or equal to the first video packet PTS (MediaConvert drops captions and data packets with lesser PTS values). Keep the default value to allow all PTS values.

  • AUTO

  • ALIGN_TO_VIDEO

M2tsEbpAudioInterval

When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).

  • VIDEO_AND_FIXED_INTERVALS

  • VIDEO_INTERVAL

M2tsEbpPlacement

Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).

  • VIDEO_AND_AUDIO_PIDS

  • VIDEO_PID

M2tsEsRateInPes

Controls whether to include the ES Rate field in the PES header.

  • INCLUDE

  • EXCLUDE

M2tsForceTsVideoEbpOrder

Keep the default value unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force.

  • FORCE

  • DEFAULT

M2tsKlvMetadata

To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough. MediaConvert reads KLV metadata present in your input and passes it through to the output transport stream. To exclude this KLV metadata: Set KLV metadata insertion to None or leave blank.

  • PASSTHROUGH

  • NONE

M2tsNielsenId3

If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.

  • INSERT

  • NONE

M2tsPcrControl

When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.

  • PCR_EVERY_PES_PACKET

  • CONFIGURED_PCR_PERIOD

M2tsPreventBufferUnderflow

Specify whether MediaConvert automatically attempts to prevent decoder buffer underflows in your transport stream output. Use if you are seeing decoder buffer underflows in your output and are unable to increase your transport stream's bitrate. For most workflows: We recommend that you keep the default value, Disabled. To prevent decoder buffer underflows in your output, when possible: Choose Enabled. Note that if MediaConvert prevents a decoder buffer underflow in your output, output video quality is reduced and your job will take longer to complete.

  • DISABLED

  • ENABLED

M2tsRateMode

When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.

  • VBR

  • CBR

M2tsScte35Esam

Settings for SCTE-35 signals from ESAM. Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML.

PropertyTypeRequiredDescription
scte35EsamPid

integer

Minimum: 32

Maximum: 8182

False

Packet Identifier (PID) of the SCTE-35 stream in the transport stream generated by ESAM.

M2tsScte35Source

For SCTE-35 markers from your input-- Choose Passthrough if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None. Also provide the ESAM XML as a string in the setting Signal processing notification XML. Also enable ESAM SCTE-35 (include the property scte35Esam).

  • PASSTHROUGH

  • NONE

M2tsSegmentationMarkers

Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.

  • NONE

  • RAI_SEGSTART

  • RAI_ADAPT

  • PSI_SEGSTART

  • EBP

  • EBP_LEGACY

M2tsSegmentationStyle

The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.

  • MAINTAIN_CADENCE

  • RESET_CADENCE

M2tsSettings

MPEG-2 TS container settings. These apply to outputs in a File output group when the output's container is MPEG-2 Transport Stream (M2TS). In these assets, data is organized by the program map table (PMT). Each transport stream program contains subsets of data, including audio, video, and metadata. Each of these subsets of data has a numerical label called a packet identifier (PID). Each transport stream program corresponds to one MediaConvert output. The PMT lists the types of data in a program along with their PID. Downstream systems and players use the program map table to look up the PID for each type of data it accesses and then uses the PIDs to locate specific data within the asset.

PropertyTypeRequiredDescription
audioBufferModel

M2tsAudioBufferModel

False

Selects between the DVB and ATSC buffer models for Dolby Digital audio.

audioDuration

M2tsAudioDuration

False

Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration. In all other cases, keep the default value, Default codec duration. When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.

audioFramesPerPes

integer

Minimum: 0

Maximum: 2147483647

False

The number of audio frames to insert for each PES packet.

audioPids

Array of type integer

Minimum: 32

Maximum: 8182

False

Specify the packet identifiers (PIDs) for any elementary audio streams you include in this output. Specify multiple PIDs as a JSON array. Default is the range 482-492.

bitrate

integer

Minimum: 0

Maximum: 2147483647

False

Specify the output bitrate of the transport stream in bits per second. Setting to 0 lets the muxer automatically determine the appropriate bitrate. Other common values are 3750000, 7500000, and 15000000.

bufferModel

M2tsBufferModel

False

Controls what buffer model to use for accurate interleaving. If set to MULTIPLEX, use multiplex buffer model. If set to NONE, this can lead to lower latency, but low-memory devices may not be able to play back the stream without interruptions.

dataPTSControl

M2tsDataPtsControl

False

If you select ALIGN_TO_VIDEO, MediaConvert writes captions and data packets with Presentation Timestamp (PTS) values greater than or equal to the first video packet PTS (MediaConvert drops captions and data packets with lesser PTS values). Keep the default value to allow all PTS values.

dvbNitSettings

DvbNitSettings

False

Use these settings to insert a DVB Network Information Table (NIT) in the transport stream of this output.

dvbSdtSettings

DvbSdtSettings

False

Use these settings to insert a DVB Service Description Table (SDT) in the transport stream of this output.

dvbSubPids

Array of type integer

Minimum: 32

Maximum: 8182

False

Specify the packet identifiers (PIDs) for DVB subtitle data included in this output. Specify multiple PIDs as a JSON array. Default is the range 460-479.

dvbTdtSettings

DvbTdtSettings

False

Use these settings to insert a DVB Time and Date Table (TDT) in the transport stream of this output.

dvbTeletextPid

integer

Minimum: 32

Maximum: 8182

False

Specify the packet identifier (PID) for DVB teletext data you include in this output. Default is 499.

ebpAudioInterval

M2tsEbpAudioInterval

False

When set to VIDEO_AND_FIXED_INTERVALS, audio EBP markers will be added to partitions 3 and 4. The interval between these additional markers will be fixed, and will be slightly shorter than the video EBP marker interval. When set to VIDEO_INTERVAL, these additional markers will not be inserted. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).

ebpPlacement

M2tsEbpPlacement

False

Selects which PIDs to place EBP markers on. They can either be placed only on the video PID, or on both the video PID and all audio PIDs. Only applicable when EBP segmentation markers are is selected (segmentationMarkers is EBP or EBP_LEGACY).

esRateInPes

M2tsEsRateInPes

False

Controls whether to include the ES Rate field in the PES header.

forceTsVideoEbpOrder

M2tsForceTsVideoEbpOrder

False

Keep the default value unless you know that your audio EBP markers are incorrectly appearing before your video EBP markers. To correct this problem, set this value to Force.

fragmentTime

number

Format: float

Minimum: 0.0

False

The length, in seconds, of each fragment. Only used with EBP markers.

klvMetadata

M2tsKlvMetadata

False

To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough. MediaConvert reads KLV metadata present in your input and passes it through to the output transport stream. To exclude this KLV metadata: Set KLV metadata insertion to None or leave blank.

maxPcrInterval

integer

Minimum: 0

Maximum: 500

False

Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.

minEbpInterval

integer

Minimum: 0

Maximum: 10000

False

When set, enforces that Encoder Boundary Points do not come within the specified time interval of each other by looking ahead at input video. If another EBP is going to come in within the specified time interval, the current EBP is not emitted, and the segment is "stretched" to the next marker. The lookahead value does not add latency to the system. The Live Event must be configured elsewhere to create sufficient latency to make the lookahead accurate.

nielsenId3

M2tsNielsenId3

False

If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.

nullPacketBitrate

number

Format: float

Minimum: 0.0

False

Value in bits per second of extra null packets to insert into the transport stream. This can be used if a downstream encryption system requires periodic null packets.

patInterval

integer

Minimum: 0

Maximum: 1000

False

The number of milliseconds between instances of this table in the output transport stream.

pcrControl

M2tsPcrControl

False

When set to PCR_EVERY_PES_PACKET, a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This is effective only when the PCR PID is the same as the video or audio elementary stream.

pcrPid

integer

Minimum: 32

Maximum: 8182

False

Specify the packet identifier (PID) for the program clock reference (PCR) in this output. If you do not specify a value, the service will use the value for Video PID.

pmtInterval

integer

Minimum: 0

Maximum: 1000

False

Specify the number of milliseconds between instances of the program map table (PMT) in the output transport stream.

pmtPid

integer

Minimum: 32

Maximum: 8182

False

Specify the packet identifier (PID) for the program map table (PMT) itself. Default is 480.

preventBufferUnderflow

M2tsPreventBufferUnderflow

False

Specify whether MediaConvert automatically attempts to prevent decoder buffer underflows in your transport stream output. Use if you are seeing decoder buffer underflows in your output and are unable to increase your transport stream's bitrate. For most workflows: We recommend that you keep the default value, Disabled. To prevent decoder buffer underflows in your output, when possible: Choose Enabled. Note that if MediaConvert prevents a decoder buffer underflow in your output, output video quality is reduced and your job will take longer to complete.

privateMetadataPid

integer

Minimum: 32

Maximum: 8182

False

Specify the packet identifier (PID) of the private metadata stream. Default is 503.

programNumber

integer

Minimum: 0

Maximum: 65535

False

Use Program number to specify the program number used in the program map table (PMT) for this output. Default is 1. Program numbers and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.

ptsOffset

integer

Minimum: 0

Maximum: 3600

False

Manually specify the initial PTS offset, in seconds, when you set PTS offset to Seconds. Enter an integer from 0 to 3600. Leave blank to keep the default value 2.

ptsOffsetMode

TsPtsOffset

False

Specify the initial presentation timestamp (PTS) offset for your transport stream output. To let MediaConvert automatically determine the initial PTS offset: Keep the default value, Auto. We recommend that you choose Auto for the widest player compatibility. The initial PTS will be at least two seconds and vary depending on your output's bitrate, HRD buffer size and HRD buffer initial fill percentage. To manually specify an initial PTS offset: Choose Seconds. Then specify the number of seconds with PTS offset.

rateMode

M2tsRateMode

False

When set to CBR, inserts null packets into transport stream to fill specified bitrate. When set to VBR, the bitrate setting acts as the maximum bitrate, but the output will not be padded up to that bitrate.

scte35Esam

M2tsScte35Esam

False

Include this in your job settings to put SCTE-35 markers in your HLS and transport stream outputs at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML.

scte35Pid

integer

Minimum: 32

Maximum: 8182

False

Specify the packet identifier (PID) of the SCTE-35 stream in the transport stream.

scte35Source

M2tsScte35Source

False

For SCTE-35 markers from your input-- Choose Passthrough if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None. Also provide the ESAM XML as a string in the setting Signal processing notification XML. Also enable ESAM SCTE-35 (include the property scte35Esam).

segmentationMarkers

M2tsSegmentationMarkers

False

Inserts segmentation markers at each segmentation_time period. rai_segstart sets the Random Access Indicator bit in the adaptation field. rai_adapt sets the RAI bit and adds the current timecode in the private data bytes. psi_segstart inserts PAT and PMT tables at the start of segments. ebp adds Encoder Boundary Point information to the adaptation field as per OpenCable specification OC-SP-EBP-I01-130118. ebp_legacy adds Encoder Boundary Point information to the adaptation field using a legacy proprietary format.

segmentationStyle

M2tsSegmentationStyle

False

The segmentation style parameter controls how segmentation markers are inserted into the transport stream. With avails, it is possible that segments may be truncated, which can influence where future segmentation markers are inserted. When a segmentation style of "reset_cadence" is selected and a segment is truncated due to an avail, we will reset the segmentation cadence. This means the subsequent segment will have a duration of of $segmentation_time seconds. When a segmentation style of "maintain_cadence" is selected and a segment is truncated due to an avail, we will not reset the segmentation cadence. This means the subsequent segment will likely be truncated as well. However, all segments after that will have a duration of $segmentation_time seconds. Note that EBP lookahead is a slight exception to this rule.

segmentationTime

number

Format: float

Minimum: 0.0

False

Specify the length, in seconds, of each segment. Required unless markers is set to _none_.

timedMetadataPid

integer

Minimum: 32

Maximum: 8182

False

Packet Identifier (PID) of the ID3 metadata stream in the transport stream.

transportStreamId

integer

Minimum: 0

Maximum: 65535

False

Specify the ID for the transport stream itself in the program map table for this output. Transport stream IDs and program map tables are parts of MPEG-2 transport stream containers, used for organizing data.

videoPid

integer

Minimum: 32

Maximum: 8182

False

Specify the packet identifier (PID) of the elementary video stream in the transport stream.

M3u8AudioDuration

Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration. In all other cases, keep the default value, Default codec duration. When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.

  • DEFAULT_CODEC_DURATION

  • MATCH_VIDEO_DURATION

M3u8DataPtsControl

If you select ALIGN_TO_VIDEO, MediaConvert writes captions and data packets with Presentation Timestamp (PTS) values greater than or equal to the first video packet PTS (MediaConvert drops captions and data packets with lesser PTS values). Keep the default value AUTO to allow all PTS values.

  • AUTO

  • ALIGN_TO_VIDEO

M3u8NielsenId3

If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.

  • INSERT

  • NONE

M3u8PcrControl

When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.

  • PCR_EVERY_PES_PACKET

  • CONFIGURED_PCR_PERIOD

M3u8Scte35Source

For SCTE-35 markers from your input-- Choose Passthrough if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None if you don't want manifest conditioning. Choose Passthrough and choose Ad markers if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML.

  • PASSTHROUGH

  • NONE

M3u8Settings

These settings relate to the MPEG-2 transport stream (MPEG2-TS) container for the MPEG2-TS segments in your HLS outputs.

PropertyTypeRequiredDescription
audioDuration

M3u8AudioDuration

False

Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration. In all other cases, keep the default value, Default codec duration. When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.

audioFramesPerPes

integer

Minimum: 0

Maximum: 2147483647

False

The number of audio frames to insert for each PES packet.

audioPids

Array of type integer

Minimum: 32

Maximum: 8182

False

Packet Identifier (PID) of the elementary audio stream(s) in the transport stream. Multiple values are accepted, and can be entered in ranges and/or by comma separation.

dataPTSControl

M3u8DataPtsControl

False

If you select ALIGN_TO_VIDEO, MediaConvert writes captions and data packets with Presentation Timestamp (PTS) values greater than or equal to the first video packet PTS (MediaConvert drops captions and data packets with lesser PTS values). Keep the default value AUTO to allow all PTS values.

maxPcrInterval

integer

Minimum: 0

Maximum: 500

False

Specify the maximum time, in milliseconds, between Program Clock References (PCRs) inserted into the transport stream.

nielsenId3

M3u8NielsenId3

False

If INSERT, Nielsen inaudible tones for media tracking will be detected in the input audio and an equivalent ID3 tag will be inserted in the output.

patInterval

integer

Minimum: 0

Maximum: 1000

False

The number of milliseconds between instances of this table in the output transport stream.

pcrControl

M3u8PcrControl

False

When set to PCR_EVERY_PES_PACKET a Program Clock Reference value is inserted for every Packetized Elementary Stream (PES) header. This parameter is effective only when the PCR PID is the same as the video or audio elementary stream.

pcrPid

integer

Minimum: 32

Maximum: 8182

False

Packet Identifier (PID) of the Program Clock Reference (PCR) in the transport stream. When no value is given, the encoder will assign the same value as the Video PID.

pmtInterval

integer

Minimum: 0

Maximum: 1000

False

The number of milliseconds between instances of this table in the output transport stream.

pmtPid

integer

Minimum: 32

Maximum: 8182

False

Packet Identifier (PID) for the Program Map Table (PMT) in the transport stream.

privateMetadataPid

integer

Minimum: 32

Maximum: 8182

False

Packet Identifier (PID) of the private metadata stream in the transport stream.

programNumber

integer

Minimum: 0

Maximum: 65535

False

The value of the program number field in the Program Map Table.

ptsOffset

integer

Minimum: 0

Maximum: 3600

False

Manually specify the initial PTS offset, in seconds, when you set PTS offset to Seconds. Enter an integer from 0 to 3600. Leave blank to keep the default value 2.

ptsOffsetMode

TsPtsOffset

False

Specify the initial presentation timestamp (PTS) offset for your transport stream output. To let MediaConvert automatically determine the initial PTS offset: Keep the default value, Auto. We recommend that you choose Auto for the widest player compatibility. The initial PTS will be at least two seconds and vary depending on your output's bitrate, HRD buffer size and HRD buffer initial fill percentage. To manually specify an initial PTS offset: Choose Seconds. Then specify the number of seconds with PTS offset.

scte35Pid

integer

Minimum: 32

Maximum: 8182

False

Packet Identifier (PID) of the SCTE-35 stream in the transport stream.

scte35Source

M3u8Scte35Source

False

For SCTE-35 markers from your input-- Choose Passthrough if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't want SCTE-35 markers in this output. For SCTE-35 markers from an ESAM XML document-- Choose None if you don't want manifest conditioning. Choose Passthrough and choose Ad markers if you do want manifest conditioning. In both cases, also provide the ESAM XML as a string in the setting Signal processing notification XML.

timedMetadata

TimedMetadata

False

Set ID3 metadata to Passthrough to include ID3 metadata in this output. This includes ID3 metadata from the following features: ID3 timestamp period, and Custom ID3 metadata inserter. To exclude this ID3 metadata in this output: set ID3 metadata to None or leave blank.

timedMetadataPid

integer

Minimum: 32

Maximum: 8182

False

Packet Identifier (PID) of the ID3 metadata stream in the transport stream.

transportStreamId

integer

Minimum: 0

Maximum: 65535

False

The value of the transport stream ID field in the Program Map Table.

videoPid

integer

Minimum: 32

Maximum: 8182

False

Packet Identifier (PID) of the elementary video stream in the transport stream.

MovClapAtom

When enabled, include 'clap' atom if appropriate for the video output settings.

  • INCLUDE

  • EXCLUDE

MovCslgAtom

When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.

  • INCLUDE

  • EXCLUDE

MovMpeg2FourCCControl

When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.

  • XDCAM

  • MPEG

MovPaddingControl

Unless you need Omneon compatibility: Keep the default value, None. To make this output compatible with Omneon: Choose Omneon. When you do, MediaConvert increases the length of the 'elst' edit list atom. Note that this might cause file rejections when a recipient of the output file doesn't expect this extra padding.

  • OMNEON

  • NONE

MovReference

Always keep the default value (SELF_CONTAINED) for this setting.

  • SELF_CONTAINED

  • EXTERNAL

MovSettings

These settings relate to your QuickTime MOV output container.

PropertyTypeRequiredDescription
clapAtom

MovClapAtom

False

When enabled, include 'clap' atom if appropriate for the video output settings.

cslgAtom

MovCslgAtom

False

When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.

mpeg2FourCCControl

MovMpeg2FourCCControl

False

When set to XDCAM, writes MPEG2 video streams into the QuickTime file using XDCAM fourcc codes. This increases compatibility with Apple editors and players, but may decrease compatibility with other players. Only applicable when the video codec is MPEG2.

paddingControl

MovPaddingControl

False

Unless you need Omneon compatibility: Keep the default value, None. To make this output compatible with Omneon: Choose Omneon. When you do, MediaConvert increases the length of the 'elst' edit list atom. Note that this might cause file rejections when a recipient of the output file doesn't expect this extra padding.

reference

MovReference

False

Always keep the default value (SELF_CONTAINED) for this setting.

Mp2Settings

Required when you set Codec to the value MP2.

PropertyTypeRequiredDescription
bitrate

integer

Minimum: 32000

Maximum: 384000

False

Specify the average bitrate in bits per second.

channels

integer

Minimum: 1

Maximum: 2

False

Set Channels to specify the number of channels in this output audio track. Choosing Mono in will give you 1 output channel; choosing Stereo will give you 2. In the API, valid values are 1 and 2.

sampleRate

integer

Minimum: 32000

Maximum: 48000

False

Sample rate in Hz.

Mp3RateControlMode

Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).

  • CBR

  • VBR

Mp3Settings

Required when you set Codec, under AudioDescriptions>CodecSettings, to the value MP3.

PropertyTypeRequiredDescription
bitrate

integer

Minimum: 16000

Maximum: 320000

False

Specify the average bitrate in bits per second.

channels

integer

Minimum: 1

Maximum: 2

False

Specify the number of channels in this output audio track. Choosing Mono gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.

rateControlMode

Mp3RateControlMode

False

Specify whether the service encodes this MP3 audio output with a constant bitrate (CBR) or a variable bitrate (VBR).

sampleRate

integer

Minimum: 22050

Maximum: 48000

False

Sample rate in Hz.

vbrQuality

integer

Minimum: 0

Maximum: 9

False

Required when you set Bitrate control mode to VBR. Specify the audio quality of this MP3 output from 0 (highest quality) to 9 (lowest quality).

Mp4CslgAtom

When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.

  • INCLUDE

  • EXCLUDE

Mp4FreeSpaceBox

Inserts a free-space box immediately after the moov box.

  • INCLUDE

  • EXCLUDE

Mp4MoovPlacement

To place the MOOV atom at the beginning of your output, which is useful for progressive downloading: Leave blank or choose Progressive download. To place the MOOV at the end of your output: Choose Normal.

  • PROGRESSIVE_DOWNLOAD

  • NORMAL

Mp4Settings

These settings relate to your MP4 output container. You can create audio only outputs with this container. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/supported-codecs-containers-audio-only.html#output-codecs-and-containers-supported-for-audio-only.

PropertyTypeRequiredDescription
audioDuration

CmfcAudioDuration

False

Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration. In all other cases, keep the default value, Default codec duration. When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.

cslgAtom

Mp4CslgAtom

False

When enabled, file composition times will start at zero, composition times in the 'ctts' (composition time to sample) box for B-frames will be negative, and a 'cslg' (composition shift least greatest) box will be included per 14496-1 amendment 1. This improves compatibility with Apple players and tools.

cttsVersion

integer

Minimum: 0

Maximum: 1

False

Ignore this setting unless compliance to the CTTS box version specification matters in your workflow. Specify a value of 1 to set your CTTS box version to 1 and make your output compliant with the specification. When you specify a value of 1, you must also set CSLG atom to the value INCLUDE. Keep the default value 0 to set your CTTS box version to 0. This can provide backward compatibility for some players and packagers.

freeSpaceBox

Mp4FreeSpaceBox

False

Inserts a free-space box immediately after the moov box.

moovPlacement

Mp4MoovPlacement

False

To place the MOOV atom at the beginning of your output, which is useful for progressive downloading: Leave blank or choose Progressive download. To place the MOOV at the end of your output: Choose Normal.

mp4MajorBrand

string

False

Overrides the "Major Brand" field in the output file. Usually not necessary to specify.

MpdAccessibilityCaptionHints

Optional. Choose Include to have MediaConvert mark up your DASH manifest with <Accessibility> elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude, to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest: <Accessibility schemeIdUri="urn:scte:dash:cc:cea-608:2015" value="CC1=eng"/>

  • INCLUDE

  • EXCLUDE

MpdAudioDuration

Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration. In all other cases, keep the default value, Default codec duration. When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.

  • DEFAULT_CODEC_DURATION

  • MATCH_VIDEO_DURATION

MpdCaptionContainerType

Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.

  • RAW

  • FRAGMENTED_MP4

MpdKlvMetadata

To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough. MediaConvert reads KLV metadata present in your input and writes each instance to a separate event message box in the output, according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to None or leave blank.

  • NONE

  • PASSTHROUGH

MpdManifestMetadataSignaling

To add an InbandEventStream element in your output MPD manifest for each type of event message, set Manifest metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri will be same value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the InbandEventStream element schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of your output MPD manifest, set Manifest metadata signaling to Disabled. To enable Manifest metadata signaling, you must also set SCTE-35 source to Passthrough, ESAM SCTE-35 to insert, or ID3 metadata to Passthrough.

  • ENABLED

  • DISABLED

MpdScte35Esam

Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML.

  • INSERT

  • NONE

MpdScte35Source

Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't want those SCTE-35 markers in this output.

  • PASSTHROUGH

  • NONE

MpdSettings

These settings relate to the fragmented MP4 container for the segments in your DASH outputs.

PropertyTypeRequiredDescription
accessibilityCaptionHints

MpdAccessibilityCaptionHints

False

Optional. Choose Include to have MediaConvert mark up your DASH manifest with <Accessibility> elements for embedded 608 captions. This markup isn't generally required, but some video players require it to discover and play embedded 608 captions. Keep the default value, Exclude, to leave these elements out. When you enable this setting, this is the markup that MediaConvert includes in your manifest: <Accessibility schemeIdUri="urn:scte:dash:cc:cea-608:2015" value="CC1=eng"/>

audioDuration

MpdAudioDuration

False

Specify this setting only when your output will be consumed by a downstream repackaging workflow that is sensitive to very small duration differences between video and audio. For this situation, choose Match video duration. In all other cases, keep the default value, Default codec duration. When you choose Match video duration, MediaConvert pads the output audio streams with silence or trims them to ensure that the total duration of each audio stream is at least as long as the total duration of the video stream. After padding or trimming, the audio stream duration is no more than one frame longer than the video stream. MediaConvert applies audio padding or trimming only to the end of the last segment of the output. For unsegmented outputs, MediaConvert adds padding only to the end of the file. When you keep the default value, any minor discrepancies between audio and video duration will depend on your output audio codec.

captionContainerType

MpdCaptionContainerType

False

Use this setting only in DASH output groups that include sidecar TTML or IMSC captions. You specify sidecar captions in a separate output from your audio and video. Choose Raw for captions in a single XML file in a raw container. Choose Fragmented MPEG-4 for captions in XML format contained within fragmented MP4 files. This set of fragmented MP4 files is separate from your video and audio fragmented MP4 files.

klvMetadata

MpdKlvMetadata

False

To include key-length-value metadata in this output: Set KLV metadata insertion to Passthrough. MediaConvert reads KLV metadata present in your input and writes each instance to a separate event message box in the output, according to MISB ST1910.1. To exclude this KLV metadata: Set KLV metadata insertion to None or leave blank.

manifestMetadataSignaling

MpdManifestMetadataSignaling

False

To add an InbandEventStream element in your output MPD manifest for each type of event message, set Manifest metadata signaling to Enabled. For ID3 event messages, the InbandEventStream element schemeIdUri will be same value that you specify for ID3 metadata scheme ID URI. For SCTE35 event messages, the InbandEventStream element schemeIdUri will be "urn:scte:scte35:2013:bin". To leave these elements out of your output MPD manifest, set Manifest metadata signaling to Disabled. To enable Manifest metadata signaling, you must also set SCTE-35 source to Passthrough, ESAM SCTE-35 to insert, or ID3 metadata to Passthrough.

scte35Esam

MpdScte35Esam

False

Use this setting only when you specify SCTE-35 markers from ESAM. Choose INSERT to put SCTE-35 markers in this output at the insertion points that you specify in an ESAM XML document. Provide the document in the setting SCC XML.

scte35Source

MpdScte35Source

False

Ignore this setting unless you have SCTE-35 markers in your input video file. Choose Passthrough if you want SCTE-35 markers that appear in your input to also appear in this output. Choose None if you don't want those SCTE-35 markers in this output.

timedMetadata

MpdTimedMetadata

False

To include ID3 metadata in this output: Set ID3 metadata to Passthrough. Specify this ID3 metadata in Custom ID3 metadata inserter. MediaConvert writes each instance of ID3 metadata in a separate Event Message (eMSG) box. To exclude this ID3 metadata: Set ID3 metadata to None or leave blank.

timedMetadataBoxVersion

MpdTimedMetadataBoxVersion

False

Specify the event message box (eMSG) version for ID3 timed metadata in your output. For more information, see ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax. Leave blank to use the default value Version 0. When you specify Version 1, you must also set ID3 metadata to Passthrough.

timedMetadataSchemeIdUri

string

MaxLength: 1000

False

Specify the event message box (eMSG) scheme ID URI for ID3 timed metadata in your output. For more information, see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. Leave blank to use the default value: https://aomedia.org/emsg/ID3 When you specify a value for ID3 metadata scheme ID URI, you must also set ID3 metadata to Passthrough.

timedMetadataValue

string

MaxLength: 1000

False

Specify the event message box (eMSG) value for ID3 timed metadata in your output. For more information, see ISO/IEC 23009-1:2022 section 5.10.3.3.4 Semantics. When you specify a value for ID3 Metadata Value, you must also set ID3 metadata to Passthrough.

MpdTimedMetadata

To include ID3 metadata in this output: Set ID3 metadata to Passthrough. Specify this ID3 metadata in Custom ID3 metadata inserter. MediaConvert writes each instance of ID3 metadata in a separate Event Message (eMSG) box. To exclude this ID3 metadata: Set ID3 metadata to None or leave blank.

  • PASSTHROUGH

  • NONE

MpdTimedMetadataBoxVersion

Specify the event message box (eMSG) version for ID3 timed metadata in your output. For more information, see ISO/IEC 23009-1:2022 section 5.10.3.3.3 Syntax. Leave blank to use the default value Version 0. When you specify Version 1, you must also set ID3 metadata to Passthrough.

  • VERSION_0

  • VERSION_1

Mpeg2AdaptiveQuantization

Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization, and Temporal adaptive quantization.

  • OFF

  • LOW

  • MEDIUM

  • HIGH

Mpeg2CodecLevel

Use Level to set the MPEG-2 level for the video output.

  • AUTO

  • LOW

  • MAIN

  • HIGH1440

  • HIGH

Mpeg2CodecProfile

Use Profile to set the MPEG-2 profile for the video output.

  • MAIN

  • PROFILE_422

Mpeg2DynamicSubGop

Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames.

  • ADAPTIVE

  • STATIC

Mpeg2FramerateControl

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

Mpeg2FramerateConversionAlgorithm

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

  • DUPLICATE_DROP

  • INTERPOLATE

  • FRAMEFORMER

Mpeg2GopSizeUnits

Specify the units for GOP size. If you don't specify a value here, by default the encoder measures GOP size in frames.

  • FRAMES

  • SECONDS

Mpeg2InterlaceMode

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

  • PROGRESSIVE

  • TOP_FIELD

  • BOTTOM_FIELD

  • FOLLOW_TOP_FIELD

  • FOLLOW_BOTTOM_FIELD

Mpeg2IntraDcPrecision

Use Intra DC precision to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.

  • AUTO

  • INTRA_DC_PRECISION_8

  • INTRA_DC_PRECISION_9

  • INTRA_DC_PRECISION_10

  • INTRA_DC_PRECISION_11

Mpeg2ParControl

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

Mpeg2QualityTuningLevel

Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.

  • SINGLE_PASS

  • MULTI_PASS

Mpeg2RateControlMode

Use Rate control mode to specify whether the bitrate is variable (vbr) or constant (cbr).

  • VBR

  • CBR

Mpeg2ScanTypeConversionMode

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

  • INTERLACED

  • INTERLACED_OPTIMIZE

Mpeg2SceneChangeDetect

Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.

  • DISABLED

  • ENABLED

Mpeg2Settings

Required when you set Codec to the value MPEG2.

PropertyTypeRequiredDescription
adaptiveQuantization

Mpeg2AdaptiveQuantization

False

Specify the strength of any adaptive quantization filters that you enable. The value that you choose here applies to the following settings: Spatial adaptive quantization, and Temporal adaptive quantization.

bitrate

integer

Minimum: 1000

Maximum: 288000000

False

Specify the average bitrate in bits per second. Required for VBR and CBR. For MS Smooth outputs, bitrates must be unique when rounded down to the nearest multiple of 1000.

codecLevel

Mpeg2CodecLevel

False

Use Level to set the MPEG-2 level for the video output.

codecProfile

Mpeg2CodecProfile

False

Use Profile to set the MPEG-2 profile for the video output.

dynamicSubGop

Mpeg2DynamicSubGop

False

Choose Adaptive to improve subjective video quality for high-motion content. This will cause the service to use fewer B-frames (which infer information based on other frames) for high-motion portions of the video and more B-frames for low-motion portions. The maximum number of B-frames is limited by the value you provide for the setting B frames between reference frames.

framerateControl

Mpeg2FramerateControl

False

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

framerateConversionAlgorithm

Mpeg2FramerateConversionAlgorithm

False

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

framerateDenominator

integer

Minimum: 1

Maximum: 1001

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

framerateNumerator

integer

Minimum: 24

Maximum: 60000

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

gopClosedCadence

integer

Minimum: 0

Maximum: 2147483647

False

Specify the relative frequency of open to closed GOPs in this output. For example, if you want to allow four open GOPs and then require a closed GOP, set this value to 5. When you create a streaming output, we recommend that you keep the default value, 1, so that players starting mid-stream receive an IDR frame as quickly as possible. Don't set this value to 0; that would break output segmenting.

gopSize

number

Format: float

Minimum: 0.0

False

Specify the interval between keyframes, in seconds or frames, for this output. Default: 12 Related settings: When you specify the GOP size in seconds, set GOP mode control to Specified, seconds. The default value for GOP mode control is Frames.

gopSizeUnits

Mpeg2GopSizeUnits

False

Specify the units for GOP size. If you don't specify a value here, by default the encoder measures GOP size in frames.

hrdBufferFinalFillPercentage

integer

Minimum: 0

Maximum: 100

False

If your downstream systems have strict buffer requirements: Specify the minimum percentage of the HRD buffer that's available at the end of each encoded video segment. For the best video quality: Set to 0 or leave blank to automatically determine the final buffer fill percentage.

hrdBufferInitialFillPercentage

integer

Minimum: 0

Maximum: 100

False

Percentage of the buffer that should initially be filled (HRD buffer model).

hrdBufferSize

integer

Minimum: 0

Maximum: 47185920

False

Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

interlaceMode

Mpeg2InterlaceMode

False

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

intraDcPrecision

Mpeg2IntraDcPrecision

False

Use Intra DC precision to set quantization precision for intra-block DC coefficients. If you choose the value auto, the service will automatically select the precision based on the per-frame compression ratio.

maxBitrate

integer

Minimum: 1000

Maximum: 300000000

False

Maximum bitrate in bits/second. For example, enter five megabits per second as 5000000.

minIInterval

integer

Minimum: 0

Maximum: 30

False

Specify the minimum number of frames allowed between two IDR-frames in your output. This includes frames created at the start of a GOP or a scene change. Use Min I-Interval to improve video compression by varying GOP size when two IDR-frames would be created near each other. For example, if a regular cadence-driven IDR-frame would fall within 5 frames of a scene-change IDR-frame, and you set Min I-interval to 5, then the encoder would only write an IDR-frame for the scene-change. In this way, one GOP is shortened or extended. If a cadence-driven IDR-frame would be further than 5 frames from a scene-change IDR-frame, then the encoder leaves all IDR-frames in place. To manually specify an interval: Enter a value from 1 to 30. Use when your downstream systems have specific GOP size requirements. To disable GOP size variance: Enter 0. MediaConvert will only create IDR-frames at the start of your output's cadence-driven GOP. Use when your downstream systems require a regular GOP size.

numberBFramesBetweenReferenceFrames

integer

Minimum: 0

Maximum: 7

False

Specify the number of B-frames that MediaConvert puts between reference frames in this output. Valid values are whole numbers from 0 through 7. When you don't specify a value, MediaConvert defaults to 2.

parControl

Mpeg2ParControl

False

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

parDenominator

integer

Minimum: 1

Maximum: 2147483647

False

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

parNumerator

integer

Minimum: 1

Maximum: 2147483647

False

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

qualityTuningLevel

Mpeg2QualityTuningLevel

False

Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.

rateControlMode

Mpeg2RateControlMode

False

Use Rate control mode to specify whether the bitrate is variable (vbr) or constant (cbr).

scanTypeConversionMode

Mpeg2ScanTypeConversionMode

False

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

sceneChangeDetect

Mpeg2SceneChangeDetect

False

Enable this setting to insert I-frames at scene changes that the service automatically detects. This improves video quality and is enabled by default.

slowPal

Mpeg2SlowPal

False

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

softness

integer

Minimum: 0

Maximum: 128

False

Ignore this setting unless you need to comply with a specification that requires a specific value. If you don't have a specification requirement, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness or by enabling a noise reducer filter. The Softness setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, to use the AWS Elemental default matrices. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.

spatialAdaptiveQuantization

Mpeg2SpatialAdaptiveQuantization

False

Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.

syntax

Mpeg2Syntax

False

Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 for your MXF profile, you must also set this value to D10.

telecine

Mpeg2Telecine

False

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine produces a 29.97i output. Soft telecine produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None, MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

temporalAdaptiveQuantization

Mpeg2TemporalAdaptiveQuantization

False

Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.

Mpeg2SlowPal

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

  • DISABLED

  • ENABLED

Mpeg2SpatialAdaptiveQuantization

Keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.

  • DISABLED

  • ENABLED

Mpeg2Syntax

Specify whether this output's video uses the D10 syntax. Keep the default value to not use the syntax. Related settings: When you choose D10 for your MXF profile, you must also set this value to D10.

  • DEFAULT

  • D_10

Mpeg2Telecine

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard or soft telecine to create a smoother picture. Hard telecine produces a 29.97i output. Soft telecine produces an output with a 23.976 output that signals to the video player device to do the conversion during play back. When you keep the default value, None, MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

  • NONE

  • SOFT

  • HARD

Mpeg2TemporalAdaptiveQuantization

Keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal quantization, adjust the strength of the filter with the setting Adaptive quantization.

  • DISABLED

  • ENABLED

MxfAfdSignaling

Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.

  • NO_COPY

  • COPY_FROM_VIDEO

MxfProfile

Specify the MXF profile, also called shim, for this output. To automatically select a profile according to your output video codec and resolution, leave blank. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.

  • D_10

  • XDCAM

  • OP1A

  • XAVC

  • XDCAM_RDD9

MxfSettings

These settings relate to your MXF output container.

PropertyTypeRequiredDescription
afdSignaling

MxfAfdSignaling

False

Optional. When you have AFD signaling set up in your output video stream, use this setting to choose whether to also include it in the MXF wrapper. Choose Don't copy to exclude AFD signaling from the MXF wrapper. Choose Copy from video stream to copy the AFD values from the video stream for this output to the MXF wrapper. Regardless of which option you choose, the AFD values remain in the video stream. Related settings: To set up your output to include or exclude AFD values, see AfdSignaling, under VideoDescription. On the console, find AFD signaling under the output's video encoding settings.

profile

MxfProfile

False

Specify the MXF profile, also called shim, for this output. To automatically select a profile according to your output video codec and resolution, leave blank. For a list of codecs supported with each MXF profile, see https://docs.aws.amazon.com/mediaconvert/latest/ug/codecs-supported-with-each-mxf-profile.html. For more information about the automatic selection behavior, see https://docs.aws.amazon.com/mediaconvert/latest/ug/default-automatic-selection-of-mxf-profiles.html.

xavcProfileSettings

MxfXavcProfileSettings

False

Specify the XAVC profile settings for MXF outputs when you set your MXF profile to XAVC.

MxfXavcDurationMode

To create an output that complies with the XAVC file format guidelines for interoperability, keep the default value, Drop frames for compliance. To include all frames from your input in this output, keep the default setting, Allow any duration. The number of frames that MediaConvert excludes when you set this to Drop frames for compliance depends on the output frame rate and duration.

  • ALLOW_ANY_DURATION

  • DROP_FRAMES_FOR_COMPLIANCE

MxfXavcProfileSettings

Specify the XAVC profile settings for MXF outputs when you set your MXF profile to XAVC.

PropertyTypeRequiredDescription
durationMode

MxfXavcDurationMode

False

To create an output that complies with the XAVC file format guidelines for interoperability, keep the default value, Drop frames for compliance. To include all frames from your input in this output, keep the default setting, Allow any duration. The number of frames that MediaConvert excludes when you set this to Drop frames for compliance depends on the output frame rate and duration.

maxAncDataSize

integer

Minimum: 0

Maximum: 2147483647

False

Specify a value for this setting only for outputs that you set up with one of these two XAVC profiles: XAVC HD Intra CBG or XAVC 4K Intra CBG. Specify the amount of space in each frame that the service reserves for ancillary data, such as teletext captions. The default value for this setting is 1492 bytes per frame. This should be sufficient to prevent overflow unless you have multiple pages of teletext captions data. If you have a large amount of teletext data, specify a larger number.

NexGuardFileMarkerSettings

For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.

PropertyTypeRequiredDescription
license

string

MinLength: 1

MaxLength: 100000

False

Use the base64 license string that Nagra provides you. Enter it directly in your JSON job specification or in the console. Required when you include Nagra NexGuard File Marker watermarking in your job.

payload

integer

Minimum: 0

Maximum: 4194303

False

Specify the payload ID that you want associated with this output. Valid values vary depending on your Nagra NexGuard forensic watermarking workflow. Required when you include Nagra NexGuard File Marker watermarking in your job. For PreRelease Content (NGPR/G2), specify an integer from 1 through 4,194,303. You must generate a unique ID for each asset you watermark, and keep a record of which ID you have assigned to each asset. Neither Nagra nor MediaConvert keep track of the relationship between output files and your IDs. For OTT Streaming, create two adaptive bitrate (ABR) stacks for each asset. Do this by setting up two output groups. For one output group, set the value of Payload ID to 0 in every output. For the other output group, set Payload ID to 1 in every output.

preset

string

MinLength: 1

MaxLength: 256

False

Enter one of the watermarking preset strings that Nagra provides you. Required when you include Nagra NexGuard File Marker watermarking in your job.

strength

WatermarkingStrength

False

Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.

NoiseFilterPostTemporalSharpening

When you set Noise reducer to Temporal, the bandwidth and sharpness of your output is reduced. You can optionally use Post temporal sharpening to apply sharpening to the edges of your output. Note that Post temporal sharpening will also make the bandwidth reduction from the Noise reducer smaller. The default behavior, Auto, allows the transcoder to determine whether to apply sharpening, depending on your input type and quality. When you set Post temporal sharpening to Enabled, specify how much sharpening is applied using Post temporal sharpening strength. Set Post temporal sharpening to Disabled to not apply sharpening.

  • DISABLED

  • ENABLED

  • AUTO

NoiseFilterPostTemporalSharpeningStrength

Use Post temporal sharpening strength to define the amount of sharpening the transcoder applies to your output. Set Post temporal sharpening strength to Low, Medium, or High to indicate the amount of sharpening.

  • LOW

  • MEDIUM

  • HIGH

NoiseReducer

Enable the Noise reducer feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default. When you enable Noise reducer, you must also select a value for Noise reducer filter. For AVC outputs, when you include Noise reducer, you cannot include the Bandwidth reduction filter.

PropertyTypeRequiredDescription
filter

NoiseReducerFilter

False

Use Noise reducer filter to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer. * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.

filterSettings

NoiseReducerFilterSettings

False

Settings for a noise reducer filter

spatialFilterSettings

NoiseReducerSpatialFilterSettings

False

Noise reducer filter settings for spatial filter.

temporalFilterSettings

NoiseReducerTemporalFilterSettings

False

Noise reducer filter settings for temporal filter.

NoiseReducerFilter

Use Noise reducer filter to select one of the following spatial image filtering functions. To use this setting, you must also enable Noise reducer. * Bilateral preserves edges while reducing noise. * Mean (softest), Gaussian, Lanczos, and Sharpen (sharpest) do convolution filtering. * Conserve does min/max noise reduction. * Spatial does frequency-domain filtering based on JND principles. * Temporal optimizes video quality for complex motion.

  • BILATERAL

  • MEAN

  • GAUSSIAN

  • LANCZOS

  • SHARPEN

  • CONSERVE

  • SPATIAL

  • TEMPORAL

NoiseReducerFilterSettings

Settings for a noise reducer filter

PropertyTypeRequiredDescription
strength

integer

Minimum: 0

Maximum: 3

False

Relative strength of noise reducing filter. Higher values produce stronger filtering.

NoiseReducerSpatialFilterSettings

Noise reducer filter settings for spatial filter.

PropertyTypeRequiredDescription
postFilterSharpenStrength

integer

Minimum: 0

Maximum: 3

False

Specify strength of post noise reduction sharpening filter, with 0 disabling the filter and 3 enabling it at maximum strength.

speed

integer

Minimum: -2

Maximum: 3

False

The speed of the filter, from -2 (lower speed) to 3 (higher speed), with 0 being the nominal value.

strength

integer

Minimum: 0

Maximum: 16

False

Relative strength of noise reducing filter. Higher values produce stronger filtering.

NoiseReducerTemporalFilterSettings

Noise reducer filter settings for temporal filter.

PropertyTypeRequiredDescription
aggressiveMode

integer

Minimum: 0

Maximum: 4

False

Use Aggressive mode for content that has complex motion. Higher values produce stronger temporal filtering. This filters highly complex scenes more aggressively and creates better VQ for low bitrate outputs.

postTemporalSharpening

NoiseFilterPostTemporalSharpening

False

When you set Noise reducer to Temporal, the bandwidth and sharpness of your output is reduced. You can optionally use Post temporal sharpening to apply sharpening to the edges of your output. Note that Post temporal sharpening will also make the bandwidth reduction from the Noise reducer smaller. The default behavior, Auto, allows the transcoder to determine whether to apply sharpening, depending on your input type and quality. When you set Post temporal sharpening to Enabled, specify how much sharpening is applied using Post temporal sharpening strength. Set Post temporal sharpening to Disabled to not apply sharpening.

postTemporalSharpeningStrength

NoiseFilterPostTemporalSharpeningStrength

False

Use Post temporal sharpening strength to define the amount of sharpening the transcoder applies to your output. Set Post temporal sharpening strength to Low, Medium, or High to indicate the amount of sharpening.

speed

integer

Minimum: -1

Maximum: 3

False

The speed of the filter (higher number is faster). Low setting reduces bit rate at the cost of transcode time, high setting improves transcode time at the cost of bit rate.

strength

integer

Minimum: 0

Maximum: 16

False

Specify the strength of the noise reducing filter on this output. Higher values produce stronger filtering. We recommend the following value ranges, depending on the result that you want: * 0-2 for complexity reduction with minimal sharpness loss * 2-8 for complexity reduction with image preservation * 8-16 for a high level of complexity reduction

OpusSettings

Required when you set Codec, under AudioDescriptions>CodecSettings, to the value OPUS.

PropertyTypeRequiredDescription
bitrate

integer

Minimum: 32000

Maximum: 192000

False

Optional. Specify the average bitrate in bits per second. Valid values are multiples of 8000, from 32000 through 192000. The default value is 96000, which we recommend for quality and bandwidth.

channels

integer

Minimum: 1

Maximum: 2

False

Specify the number of channels in this output audio track. Choosing Mono on gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2.

sampleRate

integer

Minimum: 16000

Maximum: 48000

False

Optional. Sample rate in Hz. Valid values are 16000, 24000, and 48000. The default value is 48000.

Order

Optional. When you request lists of resources, you can specify whether they are sorted in ASCENDING or DESCENDING order. Default varies by resource.

  • ASCENDING

  • DESCENDING

OutputChannelMapping

OutputChannel mapping settings.

PropertyTypeRequiredDescription
inputChannels

Array of type integer

Minimum: -60

Maximum: 6

False

Use this setting to specify your remix values when they are integers, such as -10, 0, or 4.

inputChannelsFineTune

Array of type number

Format: float

Minimum: -60.0

Maximum: 6.0

False

Use this setting to specify your remix values when they have a decimal component, such as -10.312, 0.08, or 4.9. MediaConvert rounds your remixing values to the nearest thousandth.

OutputSdt

Selects method of inserting SDT information into output stream. "Follow input SDT" copies SDT information from input stream to output stream. "Follow input SDT if present" copies SDT information from input stream to output stream if SDT information is present in the input, otherwise it will fall back on the user-defined values. Enter "SDT Manually" means user will enter the SDT information. "No SDT" means output stream will not contain SDT information.

  • SDT_FOLLOW

  • SDT_FOLLOW_IF_PRESENT

  • SDT_MANUAL

  • SDT_NONE

PartnerWatermarking

If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.

PropertyTypeRequiredDescription
nexguardFileMarkerSettings

NexGuardFileMarkerSettings

False

For forensic video watermarking, MediaConvert supports Nagra NexGuard File Marker watermarking. MediaConvert supports both PreRelease Content (NGPR/G2) and OTT Streaming workflows.

Preset

A preset is a collection of preconfigured media conversion settings that you want MediaConvert to apply to the output during the conversion process.

PropertyTypeRequiredDescription
arn

string

False

An identifier for this resource that is unique within all of AWS.

category

string

False

An optional category you create to organize your presets.

createdAt

string

Format: date-time

False

The timestamp in epoch seconds for preset creation.

description

string

False

An optional description you create for each preset.

lastUpdated

string

Format: date-time

False

The timestamp in epoch seconds when the preset was last updated.

name

string

True

A name you create for each preset. Each name must be unique within your account.

settings

PresetSettings

True

Settings for preset

type

Type

False

A preset can be of two types: system or custom. System or built-in preset can't be modified or deleted by the user.

PresetListBy

Optional. When you request a list of presets, you can choose to list them alphabetically by NAME or chronologically by CREATION_DATE. If you don't specify, the service will list them by name.

  • NAME

  • CREATION_DATE

  • SYSTEM

PresetSettings

Settings for preset

PropertyTypeRequiredDescription
audioDescriptions

Array of type AudioDescription

False

Contains groups of audio encoding settings organized by audio codec. Include one instance of per output. Can contain multiple groups of encoding settings.

captionDescriptions

Array of type CaptionDescriptionPreset

False

This object holds groups of settings related to captions for one output. For each output that has captions, include one instance of CaptionDescriptions.

containerSettings

ContainerSettings

False

Container specific settings.

videoDescription

VideoDescription

False

VideoDescription contains a group of video encoding settings. The specific video settings depend on the video codec that you choose for the property codec. Include one instance of VideoDescription per output.

ProresChromaSampling

This setting applies only to ProRes 4444 and ProRes 4444 XQ outputs that you create from inputs that use 4:4:4 chroma sampling. Set Preserve 4:4:4 sampling to allow outputs to also use 4:4:4 chroma sampling. You must specify a value for this setting when your output codec profile supports 4:4:4 chroma sampling. Related Settings: For Apple ProRes outputs with 4:4:4 chroma sampling: Choose Preserve 4:4:4 sampling. Use when your input has 4:4:4 chroma sampling and your output codec Profile is Apple ProRes 4444 or 4444 XQ. Note that when you choose Preserve 4:4:4 sampling, you cannot include any of the following Preprocessors: Dolby Vision, HDR10+, or Noise reducer.

  • PRESERVE_444_SAMPLING

  • SUBSAMPLE_TO_422

ProresCodecProfile

Use Profile to specify the type of Apple ProRes codec to use for this output.

  • APPLE_PRORES_422

  • APPLE_PRORES_422_HQ

  • APPLE_PRORES_422_LT

  • APPLE_PRORES_422_PROXY

  • APPLE_PRORES_4444

  • APPLE_PRORES_4444_XQ

ProresFramerateControl

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

ProresFramerateConversionAlgorithm

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

  • DUPLICATE_DROP

  • INTERPOLATE

  • FRAMEFORMER

ProresInterlaceMode

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

  • PROGRESSIVE

  • TOP_FIELD

  • BOTTOM_FIELD

  • FOLLOW_TOP_FIELD

  • FOLLOW_BOTTOM_FIELD

ProresParControl

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

ProresScanTypeConversionMode

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

  • INTERLACED

  • INTERLACED_OPTIMIZE

ProresSettings

Required when you set Codec to the value PRORES.

PropertyTypeRequiredDescription
chromaSampling

ProresChromaSampling

False

This setting applies only to ProRes 4444 and ProRes 4444 XQ outputs that you create from inputs that use 4:4:4 chroma sampling. Set Preserve 4:4:4 sampling to allow outputs to also use 4:4:4 chroma sampling. You must specify a value for this setting when your output codec profile supports 4:4:4 chroma sampling. Related Settings: For Apple ProRes outputs with 4:4:4 chroma sampling: Choose Preserve 4:4:4 sampling. Use when your input has 4:4:4 chroma sampling and your output codec Profile is Apple ProRes 4444 or 4444 XQ. Note that when you choose Preserve 4:4:4 sampling, you cannot include any of the following Preprocessors: Dolby Vision, HDR10+, or Noise reducer.

codecProfile

ProresCodecProfile

False

Use Profile to specify the type of Apple ProRes codec to use for this output.

framerateControl

ProresFramerateControl

False

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

framerateConversionAlgorithm

ProresFramerateConversionAlgorithm

False

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

framerateDenominator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

framerateNumerator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

interlaceMode

ProresInterlaceMode

False

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

parControl

ProresParControl

False

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

parDenominator

integer

Minimum: 1

Maximum: 2147483647

False

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

parNumerator

integer

Minimum: 1

Maximum: 2147483647

False

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

scanTypeConversionMode

ProresScanTypeConversionMode

False

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

slowPal

ProresSlowPal

False

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

telecine

ProresTelecine

False

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine to create a smoother picture. When you keep the default value, None, MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

ProresSlowPal

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output. When you enable slow PAL, MediaConvert relabels the video frames to 25 fps and resamples your audio to keep it synchronized with the video. Note that enabling this setting will slightly reduce the duration of your video. Required settings: You must also set Framerate to 25.

  • DISABLED

  • ENABLED

ProresTelecine

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine to create a smoother picture. When you keep the default value, None, MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

  • NONE

  • HARD

Rectangle

Use Rectangle to identify a specific area of the video frame.

PropertyTypeRequiredDescription
height

integer

Minimum: 2

Maximum: 2147483647

False

Height of rectangle in pixels. Specify only even numbers.

width

integer

Minimum: 2

Maximum: 2147483647

False

Width of rectangle in pixels. Specify only even numbers.

x

integer

Minimum: 0

Maximum: 2147483647

False

The distance, in pixels, between the rectangle and the left edge of the video frame. Specify only even numbers.

y

integer

Minimum: 0

Maximum: 2147483647

False

The distance, in pixels, between the rectangle and the top edge of the video frame. Specify only even numbers.

RemixSettings

Use Manual audio remixing to adjust audio levels for each audio channel in each output of your job. With audio remixing, you can output more or fewer audio channels than your input audio source provides.

PropertyTypeRequiredDescription
audioDescriptionAudioChannel

integer

Minimum: 1

Maximum: 64

False

Optionally specify the channel in your input that contains your audio description audio signal. MediaConvert mixes your audio signal across all output channels, while reducing their volume according to your data stream. When you specify an audio description audio channel, you must also specify an audio description data channel. For more information about audio description signals, see the BBC WHP 198 and 051 white papers.

audioDescriptionDataChannel

integer

Minimum: 1

Maximum: 64

False

Optionally specify the channel in your input that contains your audio description data stream. MediaConvert mixes your audio signal across all output channels, while reducing their volume according to your data stream. When you specify an audio description data channel, you must also specify an audio description audio channel. For more information about audio description signals, see the BBC WHP 198 and 051 white papers.

channelMapping

ChannelMapping

False

Channel mapping contains the group of fields that hold the remixing value for each channel, in dB. Specify remix values to indicate how much of the content from your input audio channel you want in your output audio channels. Each instance of the InputChannels or InputChannelsFineTune array specifies these values for one output channel. Use one instance of this array for each output channel. In the console, each array corresponds to a column in the graphical depiction of the mapping matrix. The rows of the graphical matrix correspond to input channels. Valid values are within the range from -60 (mute) through 6. A setting of 0 passes the input channel unchanged to the output channel (no attenuation or amplification). Use InputChannels or InputChannelsFineTune to specify your remix values. Don't use both.

channelsIn

integer

Minimum: 1

Maximum: 64

False

Specify the number of audio channels from your input that you want to use in your output. With remixing, you might combine or split the data in these channels, so the number of channels in your final output might be different. If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.

channelsOut

integer

Minimum: 1

Maximum: 64

False

Specify the number of channels in this output after remixing. Valid values: 1, 2, 4, 6, 8... 64. (1 and even numbers to 64.) If you are doing both input channel mapping and output channel mapping, the number of output channels in your input mapping must be the same as the number of input channels in your output mapping.

RespondToAfd

Use Respond to AFD to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to NONE. A preferred implementation of this workflow is to set RespondToAfd to and set AfdSignaling to AUTO. * Choose None to remove all input AFD values from this output.

  • NONE

  • RESPOND

  • PASSTHROUGH

SampleRangeConversion

Specify how MediaConvert limits the color sample range for this output. To create a limited range output from a full range input: Choose Limited range squeeze. For full range inputs, MediaConvert performs a linear offset to color samples equally across all pixels and frames. Color samples in 10-bit outputs are limited to 64 through 940, and 8-bit outputs are limited to 16 through 235. Note: For limited range inputs, values for color samples are passed through to your output unchanged. MediaConvert does not limit the sample range. To correct pixels in your input that are out of range or out of gamut: Choose Limited range clip. Use for broadcast applications. MediaConvert conforms any pixels outside of the values that you specify under Minimum YUV and Maximum YUV to limited range bounds. MediaConvert also corrects any YUV values that, when converted to RGB, would be outside the bounds you specify under Minimum RGB tolerance and Maximum RGB tolerance. With either limited range conversion, MediaConvert writes the sample range metadata in the output.

  • LIMITED_RANGE_SQUEEZE

  • NONE

  • LIMITED_RANGE_CLIP

ScalingBehavior

Specify the video Scaling behavior when your output has a different resolution than your input. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/video-scaling.html

  • DEFAULT

  • STRETCH_TO_OUTPUT

  • FIT

  • FIT_NO_UPSCALE

  • FILL

SccDestinationFramerate

Set Framerate to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe.

  • FRAMERATE_23_97

  • FRAMERATE_24

  • FRAMERATE_25

  • FRAMERATE_29_97_DROPFRAME

  • FRAMERATE_29_97_NON_DROPFRAME

SccDestinationSettings

Settings related to SCC captions. SCC is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/scc-srt-output-captions.html.

PropertyTypeRequiredDescription
framerate

SccDestinationFramerate

False

Set Framerate to make sure that the captions and the video are synchronized in the output. Specify a frame rate that matches the frame rate of the associated video. If the video frame rate is 29.97, choose 29.97 dropframe only if the video has video_insertion=true and drop_frame_timecode=true; otherwise, choose 29.97 non-dropframe.

SrtDestinationSettings

Settings related to SRT captions. SRT is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video.

PropertyTypeRequiredDescription
stylePassthrough

SrtStylePassthrough

False

Set Style passthrough to ENABLED to use the available style, color, and position information from your input captions. MediaConvert uses default settings for any missing style and position information in your input captions. Set Style passthrough to DISABLED, or leave blank, to ignore the style and position information from your input captions and use simplified output captions.

SrtStylePassthrough

Set Style passthrough to ENABLED to use the available style, color, and position information from your input captions. MediaConvert uses default settings for any missing style and position information in your input captions. Set Style passthrough to DISABLED, or leave blank, to ignore the style and position information from your input captions and use simplified output captions.

  • ENABLED

  • DISABLED

TeletextDestinationSettings

Settings related to teletext captions. Set up teletext captions in the same output as your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/teletext-output-captions.html.

PropertyTypeRequiredDescription
pageNumber

string

Pattern: ^[1-8][0-9a-fA-F][0-9a-eA-E]$

MinLength: 3

MaxLength: 3

False

Set pageNumber to the Teletext page number for the destination captions for this output. This value must be a three-digit hexadecimal string; strings ending in -FF are invalid. If you are passing through the entire set of Teletext data, do not use this field.

pageTypes

Array of type TeletextPageType

False

Specify the page types for this Teletext page. If you don't specify a value here, the service sets the page type to the default value Subtitle. If you pass through the entire set of Teletext data, don't use this field. When you pass through a set of Teletext pages, your output has the same page types as your input.

TeletextPageType

A page type as defined in the standard ETSI EN 300 468, Table 94

  • PAGE_TYPE_INITIAL

  • PAGE_TYPE_SUBTITLE

  • PAGE_TYPE_ADDL_INFO

  • PAGE_TYPE_PROGRAM_SCHEDULE

  • PAGE_TYPE_HEARING_IMPAIRED_SUBTITLE

TimecodeBurnin

Settings for burning the output timecode and specified prefix into the output.

PropertyTypeRequiredDescription
fontSize

integer

Minimum: 10

Maximum: 48

False

Use Font size to set the font size of any burned-in timecode. Valid values are 10, 16, 32, 48.

position

TimecodeBurninPosition

False

Use Position under Timecode burn-in to specify the location the burned-in timecode on output video.

prefix

string

Pattern: ^[ -~]+$

False

Use Prefix to place ASCII characters before any burned-in timecode. For example, a prefix of "EZ-" will result in the timecode "EZ-00:00:00:00". Provide either the characters themselves or the ASCII code equivalents. The supported range of characters is 0x20 through 0x7e. This includes letters, numbers, and all special characters represented on a standard English keyboard.

TimecodeBurninPosition

Use Position under Timecode burn-in to specify the location the burned-in timecode on output video.

  • TOP_CENTER

  • TOP_LEFT

  • TOP_RIGHT

  • MIDDLE_LEFT

  • MIDDLE_CENTER

  • MIDDLE_RIGHT

  • BOTTOM_LEFT

  • BOTTOM_CENTER

  • BOTTOM_RIGHT

TimedMetadata

Set ID3 metadata to Passthrough to include ID3 metadata in this output. This includes ID3 metadata from the following features: ID3 timestamp period, and Custom ID3 metadata inserter. To exclude this ID3 metadata in this output: set ID3 metadata to None or leave blank.

  • PASSTHROUGH

  • NONE

TsPtsOffset

Specify the initial presentation timestamp (PTS) offset for your transport stream output. To let MediaConvert automatically determine the initial PTS offset: Keep the default value, Auto. We recommend that you choose Auto for the widest player compatibility. The initial PTS will be at least two seconds and vary depending on your output's bitrate, HRD buffer size and HRD buffer initial fill percentage. To manually specify an initial PTS offset: Choose Seconds. Then specify the number of seconds with PTS offset.

  • AUTO

  • SECONDS

TtmlDestinationSettings

Settings related to TTML captions. TTML is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html.

PropertyTypeRequiredDescription
stylePassthrough

TtmlStylePassthrough

False

Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.

TtmlStylePassthrough

Pass through style and position information from a TTML-like input source (TTML, IMSC, SMPTE-TT) to the TTML output.

  • ENABLED

  • DISABLED

Type

  • SYSTEM

  • CUSTOM

UncompressedFourcc

The four character code for the uncompressed video.

  • I420

  • I422

  • I444

UncompressedFramerateControl

Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

UncompressedFramerateConversionAlgorithm

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

  • DUPLICATE_DROP

  • INTERPOLATE

  • FRAMEFORMER

UncompressedInterlaceMode

Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.

  • INTERLACED

  • PROGRESSIVE

UncompressedScanTypeConversionMode

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

  • INTERLACED

  • INTERLACED_OPTIMIZE

UncompressedSettings

Required when you set Codec, under VideoDescription>CodecSettings to the value UNCOMPRESSED.

PropertyTypeRequiredDescription
fourcc

UncompressedFourcc

False

The four character code for the uncompressed video.

framerateControl

UncompressedFramerateControl

False

Use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

framerateConversionAlgorithm

UncompressedFramerateConversionAlgorithm

False

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

framerateDenominator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

framerateNumerator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

interlaceMode

UncompressedInterlaceMode

False

Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.

scanTypeConversionMode

UncompressedScanTypeConversionMode

False

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

slowPal

UncompressedSlowPal

False

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25.

telecine

UncompressedTelecine

False

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine to create a smoother picture. When you keep the default value, None, MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

UncompressedSlowPal

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25.

  • DISABLED

  • ENABLED

UncompressedTelecine

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine to create a smoother picture. When you keep the default value, None, MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

  • NONE

  • HARD

Vc3Class

Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 gives you an output with a bitrate of approximately 145 Mbps and Class 220 gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.

  • CLASS_145_8BIT

  • CLASS_220_8BIT

  • CLASS_220_10BIT

Vc3FramerateControl

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

Vc3FramerateConversionAlgorithm

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

  • DUPLICATE_DROP

  • INTERPOLATE

  • FRAMEFORMER

Vc3InterlaceMode

Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.

  • INTERLACED

  • PROGRESSIVE

Vc3ScanTypeConversionMode

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

  • INTERLACED

  • INTERLACED_OPTIMIZE

Vc3Settings

Required when you set Codec to the value VC3

PropertyTypeRequiredDescription
framerateControl

Vc3FramerateControl

False

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

framerateConversionAlgorithm

Vc3FramerateConversionAlgorithm

False

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

framerateDenominator

integer

Minimum: 1

Maximum: 1001

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

framerateNumerator

integer

Minimum: 24

Maximum: 60000

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

interlaceMode

Vc3InterlaceMode

False

Optional. Choose the scan line type for this output. If you don't specify a value, MediaConvert will create a progressive output.

scanTypeConversionMode

Vc3ScanTypeConversionMode

False

Use this setting for interlaced outputs, when your output frame rate is half of your input frame rate. In this situation, choose Optimized interlacing to create a better quality interlaced output. In this case, each progressive frame from the input corresponds to an interlaced field in the output. Keep the default value, Basic interlacing, for all other output frame rates. With basic interlacing, MediaConvert performs any frame rate conversion first and then interlaces the frames. When you choose Optimized interlacing and you set your output frame rate to a value that isn't suitable for optimized interlacing, MediaConvert automatically falls back to basic interlacing. Required settings: To use optimized interlacing, you must set Telecine to None or Soft. You can't use optimized interlacing for hard telecine outputs. You must also set Interlace mode to a value other than Progressive.

slowPal

Vc3SlowPal

False

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25.

telecine

Vc3Telecine

False

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine to create a smoother picture. When you keep the default value, None, MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

vc3Class

Vc3Class

False

Specify the VC3 class to choose the quality characteristics for this output. VC3 class, together with the settings Framerate (framerateNumerator and framerateDenominator) and Resolution (height and width), determine your output bitrate. For example, say that your video resolution is 1920x1080 and your framerate is 29.97. Then Class 145 gives you an output with a bitrate of approximately 145 Mbps and Class 220 gives you and output with a bitrate of approximately 220 Mbps. VC3 class also specifies the color bit depth of your output.

Vc3SlowPal

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Framerate to 25.

  • DISABLED

  • ENABLED

Vc3Telecine

When you do frame rate conversion from 23.976 frames per second (fps) to 29.97 fps, and your output scan type is interlaced, you can optionally enable hard telecine to create a smoother picture. When you keep the default value, None, MediaConvert does a standard frame rate conversion to 29.97 without doing anything with the field polarity to create a smoother picture.

  • NONE

  • HARD

VideoCodec

Type of video codec

  • AV1

  • AVC_INTRA

  • FRAME_CAPTURE

  • H_264

  • H_265

  • MPEG2

  • PASSTHROUGH

  • PRORES

  • UNCOMPRESSED

  • VC3

  • VP8

  • VP9

  • XAVC

VideoCodecSettings

Video codec settings contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec. For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * UNCOMPRESSED, UncompressedSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings * XAVC, XavcSettings

PropertyTypeRequiredDescription
av1Settings

Av1Settings

False

Required when you set Codec, under VideoDescription>CodecSettings to the value AV1.

avcIntraSettings

AvcIntraSettings

False

Required when you choose AVC-Intra for your output video codec. For more information about the AVC-Intra settings, see the relevant specification. For detailed information about SD and HD in AVC-Intra, see https://ieeexplore.ieee.org/document/7290936. For information about 4K/2K in AVC-Intra, see https://pro-av.panasonic.net/en/avc-ultra/AVC-ULTRAoverview.pdf.

codec

VideoCodec

False

Specifies the video codec. This must be equal to one of the enum values defined by the object VideoCodec. To passthrough the video stream of your input JPEG2000, VC-3, AVC-INTRA or Apple ProRes video without any video encoding: Choose Passthrough. If you have multiple input videos, note that they must have identical encoding attributes. When you choose Passthrough, your output container must be MXF or QuickTime MOV.

frameCaptureSettings

FrameCaptureSettings

False

Required when you set Codec to the value FRAME_CAPTURE.

h264Settings

H264Settings

False

Required when you set Codec to the value H_264.

h265Settings

H265Settings

False

Settings for H265 codec

mpeg2Settings

Mpeg2Settings

False

Required when you set Codec to the value MPEG2.

proresSettings

ProresSettings

False

Required when you set Codec to the value PRORES.

uncompressedSettings

UncompressedSettings

False

Required when you set Codec, under VideoDescription>CodecSettings to the value UNCOMPRESSED.

vc3Settings

Vc3Settings

False

Required when you set Codec to the value VC3

vp8Settings

Vp8Settings

False

Required when you set Codec to the value VP8.

vp9Settings

Vp9Settings

False

Required when you set Codec to the value VP9.

xavcSettings

XavcSettings

False

Required when you set Codec to the value XAVC.

VideoDescription

Settings related to video encoding of your output. The specific video settings depend on the video codec that you choose.

PropertyTypeRequiredDescription
afdSignaling

AfdSignaling

False

This setting only applies to H.264, H.265, and MPEG2 outputs. Use Insert AFD signaling to specify whether the service includes AFD values in the output video data and what those values are. * Choose None to remove all AFD values from this output. * Choose Fixed to ignore input AFD values and instead encode the value specified in the job. * Choose Auto to calculate output AFD values based on the input AFD scaler data.

antiAlias

AntiAlias

False

The anti-alias filter is automatically applied to all outputs. The service no longer accepts the value DISABLED for AntiAlias. If you specify that in your job, the service will ignore the setting.

codecSettings

VideoCodecSettings

False

Video codec settings contains the group of settings related to video encoding. The settings in this group vary depending on the value that you choose for Video codec. For each codec enum that you choose, define the corresponding settings object. The following lists the codec enum, settings object pairs. * AV1, Av1Settings * AVC_INTRA, AvcIntraSettings * FRAME_CAPTURE, FrameCaptureSettings * H_264, H264Settings * H_265, H265Settings * MPEG2, Mpeg2Settings * PRORES, ProresSettings * UNCOMPRESSED, UncompressedSettings * VC3, Vc3Settings * VP8, Vp8Settings * VP9, Vp9Settings * XAVC, XavcSettings

colorMetadata

ColorMetadata

False

Choose Insert for this setting to include color metadata in this output. Choose Ignore to exclude color metadata from this output. If you don't specify a value, the service sets this to Insert by default.

crop

Rectangle

False

Use Cropping selection to specify the video area that the service will include in the output video frame.

dropFrameTimecode

DropFrameTimecode

False

Applies only to 29.97 fps outputs. When this feature is enabled, the service will use drop-frame timecode on outputs. If it is not possible to use drop-frame timecode, the system will fall back to non-drop-frame. This setting is enabled by default when Timecode insertion is enabled.

fixedAfd

integer

Minimum: 0

Maximum: 15

False

Applies only if you set AFD Signaling to Fixed. Use Fixed to specify a four-bit AFD value which the service will write on all frames of this video output.

height

integer

Minimum: 32

Maximum: 8192

False

Use Height to define the video resolution height, in pixels, for this output. To use the same resolution as your input: Leave both Width and Height blank. To evenly scale from your input resolution: Leave Height blank and enter a value for Width. For example, if your input is 1920x1080 and you set Width to 1280, your output will be 1280x720.

position

Rectangle

False

Use Selection placement to define the video area in your output frame. The area outside of the rectangle that you specify here is black.

respondToAfd

RespondToAfd

False

Use Respond to AFD to specify how the service changes the video itself in response to AFD values in the input. * Choose Respond to clip the input video frame according to the AFD value, input display aspect ratio, and output display aspect ratio. * Choose Passthrough to include the input AFD values. Do not choose this when AfdSignaling is set to NONE. A preferred implementation of this workflow is to set RespondToAfd to and set AfdSignaling to AUTO. * Choose None to remove all input AFD values from this output.

scalingBehavior

ScalingBehavior

False

Specify the video Scaling behavior when your output has a different resolution than your input. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/video-scaling.html

sharpness

integer

Minimum: 0

Maximum: 100

False

Use Sharpness setting to specify the strength of anti-aliasing. This setting changes the width of the anti-alias filter kernel used for scaling. Sharpness only applies if your output resolution is different from your input resolution. 0 is the softest setting, 100 the sharpest, and 50 recommended for most content.

timecodeInsertion

VideoTimecodeInsertion

False

Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration. In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration does.

videoPreprocessors

VideoPreprocessor

False

Find additional transcoding features under Preprocessors. Enable the features at each output individually. These features are disabled by default.

width

integer

Minimum: 32

Maximum: 8192

False

Use Width to define the video resolution width, in pixels, for this output. To use the same resolution as your input: Leave both Width and Height blank. To evenly scale from your input resolution: Leave Width blank and enter a value for Height. For example, if your input is 1920x1080 and you set Height to 720, your output will be 1280x720.

VideoPreprocessor

Find additional transcoding features under Preprocessors. Enable the features at each output individually. These features are disabled by default.

PropertyTypeRequiredDescription
colorCorrector

ColorCorrector

False

Use these settings to convert the color space or to modify properties such as hue and contrast for this output. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/converting-the-color-space.html.

deinterlacer

Deinterlacer

False

Use the deinterlacer to produce smoother motion and a clearer picture. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-scan-type.html.

dolbyVision

DolbyVision

False

Enable Dolby Vision feature to produce Dolby Vision compatible video output.

hdr10Plus

Hdr10Plus

False

Enable HDR10+ analysis and metadata injection. Compatible with HEVC only.

imageInserter

ImageInserter

False

Enable the Image inserter feature to include a graphic overlay on your video. Enable or disable this feature for each output individually. This setting is disabled by default.

noiseReducer

NoiseReducer

False

Enable the Noise reducer feature to remove noise from your video output if necessary. Enable or disable this feature for each output individually. This setting is disabled by default. When you enable Noise reducer, you must also select a value for Noise reducer filter. For AVC outputs, when you include Noise reducer, you cannot include the Bandwidth reduction filter.

partnerWatermarking

PartnerWatermarking

False

If you work with a third party video watermarking partner, use the group of settings that correspond with your watermarking partner to include watermarks in your output.

timecodeBurnin

TimecodeBurnin

False

Settings for burning the output timecode and specified prefix into the output.

VideoTimecodeInsertion

Applies only to H.264, H.265, MPEG2, and ProRes outputs. Only enable Timecode insertion when the input frame rate is identical to the output frame rate. To include timecodes in this output, set Timecode insertion to PIC_TIMING_SEI. To leave them out, set it to DISABLED. Default is DISABLED. When the service inserts timecodes in an output, by default, it uses any embedded timecodes from the input. If none are present, the service will set the timecode for the first output frame to zero. To change this default behavior, adjust the settings under Timecode configuration. In the console, these settings are located under Job > Job settings > Timecode configuration. Note - Timecode source under input settings does not affect the timecodes that are inserted in the output. Source under Job settings > Timecode configuration does.

  • DISABLED

  • PIC_TIMING_SEI

VorbisSettings

Required when you set Codec, under AudioDescriptions>CodecSettings, to the value Vorbis.

PropertyTypeRequiredDescription
channels

integer

Minimum: 1

Maximum: 2

False

Optional. Specify the number of channels in this output audio track. Choosing Mono on the console gives you 1 output channel; choosing Stereo gives you 2. In the API, valid values are 1 and 2. The default value is 2.

sampleRate

integer

Minimum: 22050

Maximum: 48000

False

Optional. Specify the audio sample rate in Hz. Valid values are 22050, 32000, 44100, and 48000. The default value is 48000.

vbrQuality

integer

Minimum: -1

Maximum: 10

False

Optional. Specify the variable audio quality of this Vorbis output from -1 (lowest quality, ~45 kbit/s) to 10 (highest quality, ~500 kbit/s). The default value is 4 (~128 kbit/s). Values 5 and 6 are approximately 160 and 192 kbit/s, respectively.

Vp8FramerateControl

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

Vp8FramerateConversionAlgorithm

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

  • DUPLICATE_DROP

  • INTERPOLATE

  • FRAMEFORMER

Vp8ParControl

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

Vp8QualityTuningLevel

Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

  • MULTI_PASS

  • MULTI_PASS_HQ

Vp8RateControlMode

With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.

  • VBR

Vp8Settings

Required when you set Codec to the value VP8.

PropertyTypeRequiredDescription
bitrate

integer

Minimum: 1000

Maximum: 1152000000

False

Target bitrate in bits/second. For example, enter five megabits per second as 5000000.

framerateControl

Vp8FramerateControl

False

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

framerateConversionAlgorithm

Vp8FramerateConversionAlgorithm

False

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

framerateDenominator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

framerateNumerator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

gopSize

number

Format: float

Minimum: 0.0

False

GOP Length (keyframe interval) in frames. Must be greater than zero.

hrdBufferSize

integer

Minimum: 0

Maximum: 47185920

False

Optional. Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

maxBitrate

integer

Minimum: 1000

Maximum: 1152000000

False

Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.

parControl

Vp8ParControl

False

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

parDenominator

integer

Minimum: 1

Maximum: 2147483647

False

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

parNumerator

integer

Minimum: 1

Maximum: 2147483647

False

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

qualityTuningLevel

Vp8QualityTuningLevel

False

Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

rateControlMode

Vp8RateControlMode

False

With the VP8 codec, you can use only the variable bitrate (VBR) rate control mode.

Vp9FramerateControl

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

Vp9FramerateConversionAlgorithm

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

  • DUPLICATE_DROP

  • INTERPOLATE

  • FRAMEFORMER

Vp9ParControl

Optional. Specify how the service determines the pixel aspect ratio (PAR) for this output. The default behavior, Follow source, uses the PAR from your input video for your output. To specify a different PAR in the console, choose any value other than Follow source. When you choose SPECIFIED for this setting, you must also specify values for the parNumerator and parDenominator settings.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

Vp9QualityTuningLevel

Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

  • MULTI_PASS

  • MULTI_PASS_HQ

Vp9RateControlMode

With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.

  • VBR

Vp9Settings

Required when you set Codec to the value VP9.

PropertyTypeRequiredDescription
bitrate

integer

Minimum: 1000

Maximum: 480000000

False

Target bitrate in bits/second. For example, enter five megabits per second as 5000000.

framerateControl

Vp9FramerateControl

False

If you are using the console, use the Framerate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list or choose Custom. The framerates shown in the dropdown list are decimal approximations of fractions. If you choose Custom, specify your frame rate as a fraction.

framerateConversionAlgorithm

Vp9FramerateConversionAlgorithm

False

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

framerateDenominator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

framerateNumerator

integer

Minimum: 1

Maximum: 2147483647

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

gopSize

number

Format: float

Minimum: 0.0

False

GOP Length (keyframe interval) in frames. Must be greater than zero.

hrdBufferSize

integer

Minimum: 0

Maximum: 47185920

False

Size of buffer (HRD buffer model) in bits. For example, enter five megabits as 5000000.

maxBitrate

integer

Minimum: 1000

Maximum: 480000000

False

Ignore this setting unless you set qualityTuningLevel to MULTI_PASS. Optional. Specify the maximum bitrate in bits/second. For example, enter five megabits per second as 5000000. The default behavior uses twice the target bitrate as the maximum bitrate.

parControl

Vp9ParControl

False

Optional. Specify how the service determines the pixel aspect ratio for this output. The default behavior is to use the same pixel aspect ratio as your input video.

parDenominator

integer

Minimum: 1

Maximum: 2147483647

False

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parDenominator is 33.

parNumerator

integer

Minimum: 1

Maximum: 2147483647

False

Required when you set Pixel aspect ratio to SPECIFIED. On the console, this corresponds to any value other than Follow source. When you specify an output pixel aspect ratio (PAR) that is different from your input video PAR, provide your output PAR as a ratio. For example, for D1/DV NTSC widescreen, you would specify the ratio 40:33. In this example, the value for parNumerator is 40.

qualityTuningLevel

Vp9QualityTuningLevel

False

Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, multi-pass encoding.

rateControlMode

Vp9RateControlMode

False

With the VP9 codec, you can use only the variable bitrate (VBR) rate control mode.

WatermarkingStrength

Optional. Ignore this setting unless Nagra support directs you to specify a value. When you don't specify a value here, the Nagra NexGuard library uses its default value.

  • LIGHTEST

  • LIGHTER

  • DEFAULT

  • STRONGER

  • STRONGEST

WavFormat

The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.

  • RIFF

  • RF64

WavSettings

Required when you set Codec to the value WAV.

PropertyTypeRequiredDescription
bitDepth

integer

Minimum: 16

Maximum: 24

False

Specify Bit depth, in bits per sample, to choose the encoding quality for this audio track.

channels

integer

Minimum: 1

Maximum: 64

False

Specify the number of channels in this output audio track. Valid values are 1 and even numbers up to 64. For example, 1, 2, 4, 6, and so on, up to 64.

format

WavFormat

False

The service defaults to using RIFF for WAV outputs. If your output audio is likely to exceed 4 GB in file size, or if you otherwise need the extended support of the RF64 format, set your output WAV file format to RF64.

sampleRate

integer

Minimum: 8000

Maximum: 192000

False

Sample rate in Hz.

WebvttAccessibilitySubs

If the WebVTT captions track is intended to provide accessibility for people who are deaf or hard of hearing: Set Accessibility subtitles to Enabled. When you do, MediaConvert adds accessibility attributes to your output HLS or DASH manifest. For HLS manifests, MediaConvert adds the following accessibility attributes under EXT-X-MEDIA for this track: CHARACTERISTICS="public.accessibility.describes-spoken-dialog,public.accessibility.describes-music-and-sound" and AUTOSELECT="YES". For DASH manifests, MediaConvert adds the following in the adaptation set for this track: <Accessibility schemeIdUri="urn:mpeg:dash:role:2011" value="caption"/>. If the captions track is not intended to provide such accessibility: Keep the default value, Disabled. When you do, for DASH manifests, MediaConvert instead adds the following in the adaptation set for this track: <Role schemeIDUri="urn:mpeg:dash:role:2011" value="subtitle"/>.

  • DISABLED

  • ENABLED

WebvttDestinationSettings

Settings related to WebVTT captions. WebVTT is a sidecar format that holds captions in a file that is separate from the video container. Set up sidecar captions in the same output group, but different output from your video. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/ttml-and-webvtt-output-captions.html.

PropertyTypeRequiredDescription
accessibility

WebvttAccessibilitySubs

False

If the WebVTT captions track is intended to provide accessibility for people who are deaf or hard of hearing: Set Accessibility subtitles to Enabled. When you do, MediaConvert adds accessibility attributes to your output HLS or DASH manifest. For HLS manifests, MediaConvert adds the following accessibility attributes under EXT-X-MEDIA for this track: CHARACTERISTICS="public.accessibility.describes-spoken-dialog,public.accessibility.describes-music-and-sound" and AUTOSELECT="YES". For DASH manifests, MediaConvert adds the following in the adaptation set for this track: <Accessibility schemeIdUri="urn:mpeg:dash:role:2011" value="caption"/>. If the captions track is not intended to provide such accessibility: Keep the default value, Disabled. When you do, for DASH manifests, MediaConvert instead adds the following in the adaptation set for this track: <Role schemeIDUri="urn:mpeg:dash:role:2011" value="subtitle"/>.

stylePassthrough

WebvttStylePassthrough

False

To use the available style, color, and position information from your input captions: Set Style passthrough to Enabled. MediaConvert uses default settings when style and position information is missing from your input captions. To recreate the input captions exactly: Set Style passthrough to Strict. MediaConvert automatically applies timing adjustments, including adjustments for frame rate conversion, ad avails, and input clipping. Your input captions format must be WebVTT. To ignore the style and position information from your input captions and use simplified output captions: Set Style passthrough to Disabled, or leave blank.

WebvttStylePassthrough

To use the available style, color, and position information from your input captions: Set Style passthrough to Enabled. MediaConvert uses default settings when style and position information is missing from your input captions. To recreate the input captions exactly: Set Style passthrough to Strict. MediaConvert automatically applies timing adjustments, including adjustments for frame rate conversion, ad avails, and input clipping. Your input captions format must be WebVTT. To ignore the style and position information from your input captions and use simplified output captions: Set Style passthrough to Disabled, or leave blank.

  • ENABLED

  • DISABLED

  • STRICT

Xavc4kIntraCbgProfileClass

Specify the XAVC Intra 4k (CBG) Class to set the bitrate of your output. Outputs of the same class have similar image quality over the operating points that are valid for that class.

  • CLASS_100

  • CLASS_300

  • CLASS_480

Xavc4kIntraCbgProfileSettings

Required when you set Profile to the value XAVC_4K_INTRA_CBG.

PropertyTypeRequiredDescription
xavcClass

Xavc4kIntraCbgProfileClass

False

Specify the XAVC Intra 4k (CBG) Class to set the bitrate of your output. Outputs of the same class have similar image quality over the operating points that are valid for that class.

Xavc4kIntraVbrProfileClass

Specify the XAVC Intra 4k (VBR) Class to set the bitrate of your output. Outputs of the same class have similar image quality over the operating points that are valid for that class.

  • CLASS_100

  • CLASS_300

  • CLASS_480

Xavc4kIntraVbrProfileSettings

Required when you set Profile to the value XAVC_4K_INTRA_VBR.

PropertyTypeRequiredDescription
xavcClass

Xavc4kIntraVbrProfileClass

False

Specify the XAVC Intra 4k (VBR) Class to set the bitrate of your output. Outputs of the same class have similar image quality over the operating points that are valid for that class.

Xavc4kProfileBitrateClass

Specify the XAVC 4k (Long GOP) Bitrate Class to set the bitrate of your output. Outputs of the same class have similar image quality over the operating points that are valid for that class.

  • BITRATE_CLASS_100

  • BITRATE_CLASS_140

  • BITRATE_CLASS_200

Xavc4kProfileCodecProfile

Specify the codec profile for this output. Choose High, 8-bit, 4:2:0 (HIGH) or High, 10-bit, 4:2:2 (HIGH_422). These profiles are specified in ITU-T H.264.

  • HIGH

  • HIGH_422

Xavc4kProfileQualityTuningLevel

Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.

  • SINGLE_PASS

  • SINGLE_PASS_HQ

  • MULTI_PASS_HQ

Xavc4kProfileSettings

Required when you set Profile to the value XAVC_4K.

PropertyTypeRequiredDescription
bitrateClass

Xavc4kProfileBitrateClass

False

Specify the XAVC 4k (Long GOP) Bitrate Class to set the bitrate of your output. Outputs of the same class have similar image quality over the operating points that are valid for that class.

codecProfile

Xavc4kProfileCodecProfile

False

Specify the codec profile for this output. Choose High, 8-bit, 4:2:0 (HIGH) or High, 10-bit, 4:2:2 (HIGH_422). These profiles are specified in ITU-T H.264.

flickerAdaptiveQuantization

XavcFlickerAdaptiveQuantization

False

The best way to set up adaptive quantization is to keep the default value, Auto, for the setting Adaptive quantization. When you do so, MediaConvert automatically applies the best types of quantization for your video content. Include this setting in your JSON job specification only when you choose to change the default value for Adaptive quantization. Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set Adaptive quantization to a value other than Off or Auto. Use Adaptive quantization to adjust the degree of smoothing that Flicker adaptive quantization provides.

gopBReference

XavcGopBReference

False

Specify whether the encoder uses B-frames as reference frames for other pictures in the same GOP. Choose Allow to allow the encoder to use B-frames as reference frames. Choose Don't allow to prevent the encoder from using B-frames as reference frames.

gopClosedCadence

integer

Minimum: 0

Maximum: 2147483647

False

Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.

hrdBufferSize

integer

Minimum: 0

Maximum: 1152000000

False

Specify the size of the buffer that MediaConvert uses in the HRD buffer model for this output. Specify this value in bits; for example, enter five megabits as 5000000. When you don't set this value, or you set it to zero, MediaConvert calculates the default by doubling the bitrate of this output point.

qualityTuningLevel

Xavc4kProfileQualityTuningLevel

False

Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.

slices

integer

Minimum: 8

Maximum: 12

False

Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.

XavcAdaptiveQuantization

Keep the default value, Auto, for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set Adaptive quantization to a value other than Auto. Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization to Off. Related settings: The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization, and Temporal adaptive quantization.

  • OFF

  • AUTO

  • LOW

  • MEDIUM

  • HIGH

  • HIGHER

  • MAX

XavcEntropyEncoding

Optional. Choose a specific entropy encoding mode only when you want to override XAVC recommendations. If you choose the value auto, MediaConvert uses the mode that the XAVC file format specifies given this output's operating point.

  • AUTO

  • CABAC

  • CAVLC

XavcFlickerAdaptiveQuantization

The best way to set up adaptive quantization is to keep the default value, Auto, for the setting Adaptive quantization. When you do so, MediaConvert automatically applies the best types of quantization for your video content. Include this setting in your JSON job specification only when you choose to change the default value for Adaptive quantization. Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set Adaptive quantization to a value other than Off or Auto. Use Adaptive quantization to adjust the degree of smoothing that Flicker adaptive quantization provides.

  • DISABLED

  • ENABLED

XavcFramerateControl

If you are using the console, use the Frame rate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list. The framerates shown in the dropdown list are decimal approximations of fractions.

  • INITIALIZE_FROM_SOURCE

  • SPECIFIED

XavcFramerateConversionAlgorithm

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

  • DUPLICATE_DROP

  • INTERPOLATE

  • FRAMEFORMER

XavcGopBReference

Specify whether the encoder uses B-frames as reference frames for other pictures in the same GOP. Choose Allow to allow the encoder to use B-frames as reference frames. Choose Don't allow to prevent the encoder from using B-frames as reference frames.

  • DISABLED

  • ENABLED

XavcHdIntraCbgProfileClass

Specify the XAVC Intra HD (CBG) Class to set the bitrate of your output. Outputs of the same class have similar image quality over the operating points that are valid for that class.

  • CLASS_50

  • CLASS_100

  • CLASS_200

XavcHdIntraCbgProfileSettings

Required when you set Profile to the value XAVC_HD_INTRA_CBG.

PropertyTypeRequiredDescription
xavcClass

XavcHdIntraCbgProfileClass

False

Specify the XAVC Intra HD (CBG) Class to set the bitrate of your output. Outputs of the same class have similar image quality over the operating points that are valid for that class.

XavcHdProfileBitrateClass

Specify the XAVC HD (Long GOP) Bitrate Class to set the bitrate of your output. Outputs of the same class have similar image quality over the operating points that are valid for that class.

  • BITRATE_CLASS_25

  • BITRATE_CLASS_35

  • BITRATE_CLASS_50

XavcHdProfileQualityTuningLevel

Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.

  • SINGLE_PASS

  • SINGLE_PASS_HQ

  • MULTI_PASS_HQ

XavcHdProfileSettings

Required when you set Profile to the value XAVC_HD.

PropertyTypeRequiredDescription
bitrateClass

XavcHdProfileBitrateClass

False

Specify the XAVC HD (Long GOP) Bitrate Class to set the bitrate of your output. Outputs of the same class have similar image quality over the operating points that are valid for that class.

flickerAdaptiveQuantization

XavcFlickerAdaptiveQuantization

False

The best way to set up adaptive quantization is to keep the default value, Auto, for the setting Adaptive quantization. When you do so, MediaConvert automatically applies the best types of quantization for your video content. Include this setting in your JSON job specification only when you choose to change the default value for Adaptive quantization. Enable this setting to have the encoder reduce I-frame pop. I-frame pop appears as a visual flicker that can arise when the encoder saves bits by copying some macroblocks many times from frame to frame, and then refreshes them at the I-frame. When you enable this setting, the encoder updates these macroblocks slightly more often to smooth out the flicker. This setting is disabled by default. Related setting: In addition to enabling this setting, you must also set Adaptive quantization to a value other than Off or Auto. Use Adaptive quantization to adjust the degree of smoothing that Flicker adaptive quantization provides.

gopBReference

XavcGopBReference

False

Specify whether the encoder uses B-frames as reference frames for other pictures in the same GOP. Choose Allow to allow the encoder to use B-frames as reference frames. Choose Don't allow to prevent the encoder from using B-frames as reference frames.

gopClosedCadence

integer

Minimum: 0

Maximum: 2147483647

False

Frequency of closed GOPs. In streaming applications, it is recommended that this be set to 1 so a decoder joining mid-stream will receive an IDR frame as quickly as possible. Setting this value to 0 will break output segmenting.

hrdBufferSize

integer

Minimum: 0

Maximum: 1152000000

False

Specify the size of the buffer that MediaConvert uses in the HRD buffer model for this output. Specify this value in bits; for example, enter five megabits as 5000000. When you don't set this value, or you set it to zero, MediaConvert calculates the default by doubling the bitrate of this output point.

interlaceMode

XavcInterlaceMode

False

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

qualityTuningLevel

XavcHdProfileQualityTuningLevel

False

Optional. Use Quality tuning level to choose how you want to trade off encoding speed for output video quality. The default behavior is faster, lower quality, single-pass encoding.

slices

integer

Minimum: 4

Maximum: 12

False

Number of slices per picture. Must be less than or equal to the number of macroblock rows for progressive pictures, and less than or equal to half the number of macroblock rows for interlaced pictures.

telecine

XavcHdProfileTelecine

False

Ignore this setting unless you set Frame rate (framerateNumerator divided by framerateDenominator) to 29.970. If your input framerate is 23.976, choose Hard. Otherwise, keep the default value None. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-telecine-and-inverse-telecine.html.

XavcHdProfileTelecine

Ignore this setting unless you set Frame rate (framerateNumerator divided by framerateDenominator) to 29.970. If your input framerate is 23.976, choose Hard. Otherwise, keep the default value None. For more information, see https://docs.aws.amazon.com/mediaconvert/latest/ug/working-with-telecine-and-inverse-telecine.html.

  • NONE

  • HARD

XavcInterlaceMode

Choose the scan line type for the output. Keep the default value, Progressive to create a progressive output, regardless of the scan type of your input. Use Top field first or Bottom field first to create an output that's interlaced with the same field polarity throughout. Use Follow, default top or Follow, default bottom to produce outputs with the same field polarity as the source. For jobs that have multiple inputs, the output field polarity might change over the course of the output. Follow behavior depends on the input scan type. If the source is interlaced, the output will be interlaced with the same polarity as the source. If the source is progressive, the output will be interlaced with top field bottom field first, depending on which of the Follow options you choose.

  • PROGRESSIVE

  • TOP_FIELD

  • BOTTOM_FIELD

  • FOLLOW_TOP_FIELD

  • FOLLOW_BOTTOM_FIELD

XavcProfile

Specify the XAVC profile for this output. For more information, see the Sony documentation at https://www.xavc-info.org/. Note that MediaConvert doesn't support the interlaced video XAVC operating points for XAVC_HD_INTRA_CBG. To create an interlaced XAVC output, choose the profile XAVC_HD.

  • XAVC_HD_INTRA_CBG

  • XAVC_4K_INTRA_CBG

  • XAVC_4K_INTRA_VBR

  • XAVC_HD

  • XAVC_4K

XavcSettings

Required when you set Codec to the value XAVC.

PropertyTypeRequiredDescription
adaptiveQuantization

XavcAdaptiveQuantization

False

Keep the default value, Auto, for this setting to have MediaConvert automatically apply the best types of quantization for your video content. When you want to apply your quantization settings manually, you must set Adaptive quantization to a value other than Auto. Use this setting to specify the strength of any adaptive quantization filters that you enable. If you don't want MediaConvert to do any adaptive quantization in this transcode, set Adaptive quantization to Off. Related settings: The value that you choose here applies to the following settings: Flicker adaptive quantization (flickerAdaptiveQuantization), Spatial adaptive quantization, and Temporal adaptive quantization.

entropyEncoding

XavcEntropyEncoding

False

Optional. Choose a specific entropy encoding mode only when you want to override XAVC recommendations. If you choose the value auto, MediaConvert uses the mode that the XAVC file format specifies given this output's operating point.

framerateControl

XavcFramerateControl

False

If you are using the console, use the Frame rate setting to specify the frame rate for this output. If you want to keep the same frame rate as the input video, choose Follow source. If you want to do frame rate conversion, choose a frame rate from the dropdown list. The framerates shown in the dropdown list are decimal approximations of fractions.

framerateConversionAlgorithm

XavcFramerateConversionAlgorithm

False

Choose the method that you want MediaConvert to use when increasing or decreasing the frame rate. For numerically simple conversions, such as 60 fps to 30 fps: We recommend that you keep the default value, Drop duplicate. For numerically complex conversions, to avoid stutter: Choose Interpolate. This results in a smooth picture, but might introduce undesirable video artifacts. For complex frame rate conversions, especially if your source video has already been converted from its original cadence: Choose FrameFormer to do motion-compensated interpolation. FrameFormer uses the best conversion method frame by frame. Note that using FrameFormer increases the transcoding time and incurs a significant add-on cost. When you choose FrameFormer, your input video resolution must be at least 128x96.

framerateDenominator

integer

Minimum: 1

Maximum: 1001

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateDenominator to specify the denominator of this fraction. In this example, use 1001 for the value of FramerateDenominator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Frame rate. In this example, specify 23.976.

framerateNumerator

integer

Minimum: 24

Maximum: 60000

False

When you use the API for transcode jobs that use frame rate conversion, specify the frame rate as a fraction. For example, 24000 / 1001 = 23.976 fps. Use FramerateNumerator to specify the numerator of this fraction. In this example, use 24000 for the value of FramerateNumerator. When you use the console for transcode jobs that use frame rate conversion, provide the value as a decimal number for Framerate. In this example, specify 23.976.

profile

XavcProfile

False

Specify the XAVC profile for this output. For more information, see the Sony documentation at https://www.xavc-info.org/. Note that MediaConvert doesn't support the interlaced video XAVC operating points for XAVC_HD_INTRA_CBG. To create an interlaced XAVC output, choose the profile XAVC_HD.

slowPal

XavcSlowPal

False

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Frame rate to 25.

softness

integer

Minimum: 0

Maximum: 128

False

Ignore this setting unless your downstream workflow requires that you specify it explicitly. Otherwise, we recommend that you adjust the softness of your output by using a lower value for the setting Sharpness or by enabling a noise reducer filter. The Softness setting specifies the quantization matrices that the encoder uses. Keep the default value, 0, for flat quantization. Choose the value 1 or 16 to use the default JVT softening quantization matricies from the H.264 specification. Choose a value from 17 to 128 to use planar interpolation. Increasing values from 17 to 128 result in increasing reduction of high-frequency data. The value 128 results in the softest video.

spatialAdaptiveQuantization

XavcSpatialAdaptiveQuantization

False

The best way to set up adaptive quantization is to keep the default value, Auto, for the setting Adaptive quantization. When you do so, MediaConvert automatically applies the best types of quantization for your video content. Include this setting in your JSON job specification only when you choose to change the default value for Adaptive quantization. For this setting, keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.

temporalAdaptiveQuantization

XavcTemporalAdaptiveQuantization

False

The best way to set up adaptive quantization is to keep the default value, Auto, for the setting Adaptive quantization. When you do so, MediaConvert automatically applies the best types of quantization for your video content. Include this setting in your JSON job specification only when you choose to change the default value for Adaptive quantization. For this setting, keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal adaptive quantization, adjust the strength of the filter with the setting Adaptive quantization.

xavc4kIntraCbgProfileSettings

Xavc4kIntraCbgProfileSettings

False

Required when you set Profile to the value XAVC_4K_INTRA_CBG.

xavc4kIntraVbrProfileSettings

Xavc4kIntraVbrProfileSettings

False

Required when you set Profile to the value XAVC_4K_INTRA_VBR.

xavc4kProfileSettings

Xavc4kProfileSettings

False

Required when you set Profile to the value XAVC_4K.

xavcHdIntraCbgProfileSettings

XavcHdIntraCbgProfileSettings

False

Required when you set Profile to the value XAVC_HD_INTRA_CBG.

xavcHdProfileSettings

XavcHdProfileSettings

False

Required when you set Profile to the value XAVC_HD.

XavcSlowPal

Ignore this setting unless your input frame rate is 23.976 or 24 frames per second (fps). Enable slow PAL to create a 25 fps output by relabeling the video frames and resampling your audio. Note that enabling this setting will slightly reduce the duration of your video. Related settings: You must also set Frame rate to 25.

  • DISABLED

  • ENABLED

XavcSpatialAdaptiveQuantization

The best way to set up adaptive quantization is to keep the default value, Auto, for the setting Adaptive quantization. When you do so, MediaConvert automatically applies the best types of quantization for your video content. Include this setting in your JSON job specification only when you choose to change the default value for Adaptive quantization. For this setting, keep the default value, Enabled, to adjust quantization within each frame based on spatial variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas that can sustain more distortion with no noticeable visual degradation and uses more bits on areas where any small distortion will be noticeable. For example, complex textured blocks are encoded with fewer bits and smooth textured blocks are encoded with more bits. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen with a lot of complex texture, you might choose to disable this feature. Related setting: When you enable spatial adaptive quantization, set the value for Adaptive quantization depending on your content. For homogeneous content, such as cartoons and video games, set it to Low. For content with a wider variety of textures, set it to High or Higher.

  • DISABLED

  • ENABLED

XavcTemporalAdaptiveQuantization

The best way to set up adaptive quantization is to keep the default value, Auto, for the setting Adaptive quantization. When you do so, MediaConvert automatically applies the best types of quantization for your video content. Include this setting in your JSON job specification only when you choose to change the default value for Adaptive quantization. For this setting, keep the default value, Enabled, to adjust quantization within each frame based on temporal variation of content complexity. When you enable this feature, the encoder uses fewer bits on areas of the frame that aren't moving and uses more bits on complex objects with sharp edges that move a lot. For example, this feature improves the readability of text tickers on newscasts and scoreboards on sports matches. Enabling this feature will almost always improve your video quality. Note, though, that this feature doesn't take into account where the viewer's attention is likely to be. If viewers are likely to be focusing their attention on a part of the screen that doesn't have moving objects with sharp edges, such as sports athletes' faces, you might choose to disable this feature. Related setting: When you enable temporal adaptive quantization, adjust the strength of the filter with the setting Adaptive quantization.

  • DISABLED

  • ENABLED

See also

For more information about using this API in one of the language-specific AWS SDKs and references, see the following:

ListPresets

CreatePreset