AWS CLI スケルトンと入力ファイル - AWS Command Line Interface

AWS CLI スケルトンと入力ファイル

ほとんどの AWS CLI コマンドは、ファイルからのすべてのパラメータ入力を受け入れます。これらのテンプレートは、generate-cli-skeletonオプションを使用して生成できます。

AWS CLI スケルトンと入力ファイルについて

ほとんどの AWS Command Line Interface (AWS CLI) コマンドは、--cli-input-json--cli-input-yaml および パラメータを使用してファイルから入力されるパラメータのすべてを受け入れる機能をサポートしています。

これらの同じコマンドで、 JSON または YAMLの形式 でファイルが生成する --generate-cli-skeleton パラメータが用意されており、すべてのパラメータを後で編集して値を入力することができます。その後、関連する --cli-input-json または --cli-input-yaml パラメータを使用してコマンドを実行し、入力済みのファイルを指定できます。

重要

一部の AWS CLI コマンド (aws s3 コマンドなど) は、個別の AWS API オペレーションに直接マッピングされません。このようなコマンドは、このトピックで説明している --generate-cli-skeleton または --cli-input-json および --cli-input-yaml パラメータもサポートしていません。特定のコマンドがこれらのパラメータをサポートしているか不明な場合は、次のコマンドを実行します。servicecommand の名前は調べたいものに置き換えてください。

$ aws service command help

出力に、指定されたコマンドがサポートするパラメータを示す Synopsis セクションが含まれています。

$ aws iam list-users help ... SYNOPSIS list-users ... [--cli-input-json | --cli-input-yaml] ... [--generate-cli-skeleton <value>] ...

--generate-cli-skeleton パラメータを指定すると、コマンドは実行せず、パラメータテンプレートを生成して表示します。これをカスタマイズして、後でコマンドに対する入力として使用することができます。生成されるテンプレートには、そのコマンドによってサポートされているすべてのパラメータが含まれています。

--generate-cli-skeleton パラメータには、次のいずれかの値を指定できます。

  • input - 生成されたテンプレートには、JSON 形式の入力パラメータがすべて含まれます。これは、デフォルト値です。

  • yaml-input - 生成されたテンプレートには、YAML 形式の入力パラメータがすべて含まれます。

  • output - 生成されたテンプレートには、JSON 形式の出力パラメータがすべて含まれます。。現在、YAML 形式で出力パラメータを要求することはできません。

AWS CLI は基本的にサービスの API の「ラッパー」であるため、スケルトンファイルは、すべてのパラメータを、基になる API パラメータ名で参照することを想定しています。このパラメータ名は AWS CLI のものとは異なることがあります。例えば、AWS CLI という名前の user-name パラメータは、AWS という名前の UserName のサービスの API パラメータにマップされる場合があります (大文字小文字が変更されダッシュがないことに注意)。エラーを回避するために、--generate-cli-skeleton オプションを使用して「正しい」パラメータ名でテンプレートを生成することをお勧めします。サービスの API リファレンスガイドを参照して、想定されるパラメータ名を確認することもできます。テンプレートから、値を指定しない必須でないパラメータを削除できます。

例えば、次のコマンドを実行すると、Amazon Elastic Compute Cloud (Amazon EC2) コマンドrun-instancesのパラメータテンプレートが生成されます 。

JSON

次の例は、input パラメータのデフォルト値 (--generate-cli-skeleton) を使用して JSON でフォーマットされたテンプレートを生成する方法を示しています。

$ aws ec2 run-instances --generate-cli-skeleton
{ "DryRun": true, "ImageId": "", "MinCount": 0, "MaxCount": 0, "KeyName": "", "SecurityGroups": [ "" ], "SecurityGroupIds": [ "" ], "UserData": "", "InstanceType": "", "Placement": { "AvailabilityZone": "", "GroupName": "", "Tenancy": "" }, "KernelId": "", "RamdiskId": "", "BlockDeviceMappings": [ { "VirtualName": "", "DeviceName": "", "Ebs": { "SnapshotId": "", "VolumeSize": 0, "DeleteOnTermination": true, "VolumeType": "", "Iops": 0, "Encrypted": true }, "NoDevice": "" } ], "Monitoring": { "Enabled": true }, "SubnetId": "", "DisableApiTermination": true, "InstanceInitiatedShutdownBehavior": "", "PrivateIpAddress": "", "ClientToken": "", "AdditionalInfo": "", "NetworkInterfaces": [ { "NetworkInterfaceId": "", "DeviceIndex": 0, "SubnetId": "", "Description": "", "PrivateIpAddress": "", "Groups": [ "" ], "DeleteOnTermination": true, "PrivateIpAddresses": [ { "PrivateIpAddress": "", "Primary": true } ], "SecondaryPrivateIpAddressCount": 0, "AssociatePublicIpAddress": true } ], "IamInstanceProfile": { "Arn": "", "Name": "" }, "EbsOptimized": true }
YAML

次の例は、yaml-input パラメータの値 (--generate-cli-skeleton) を使用して YAML でフォーマットされたテンプレートを生成する方法を示しています。

$ aws ec2 run-instances --generate-cli-skeleton yaml-input
BlockDeviceMappings: # The block device mapping entries. - DeviceName: '' # The device name (for example, /dev/sdh or xvdh). VirtualName: '' # The virtual device name (ephemeralN). Ebs: # Parameters used to automatically set up Amazon EBS volumes when the instance is launched. DeleteOnTermination: true # Indicates whether the EBS volume is deleted on instance termination. Iops: 0 # The number of I/O operations per second (IOPS) that the volume supports. SnapshotId: '' # The ID of the snapshot. VolumeSize: 0 # The size of the volume, in GiB. VolumeType: st1 # The volume type. Valid values are: standard, io1, gp2, sc1, st1. Encrypted: true # Indicates whether the encryption state of an EBS volume is changed while being restored from a backing snapshot. KmsKeyId: '' # Identifier (key ID, key alias, ID ARN, or alias ARN) for a customer managed KMS key under which the EBS volume is encrypted. NoDevice: '' # Suppresses the specified device included in the block device mapping of the AMI. ImageId: '' # The ID of the AMI. InstanceType: c4.4xlarge # The instance type. Valid values are: t1.micro, t2.nano, t2.micro, t2.small, t2.medium, t2.large, t2.xlarge, t2.2xlarge, t3.nano, t3.micro, t3.small, t3.medium, t3.large, t3.xlarge, t3.2xlarge, t3a.nano, t3a.micro, t3a.small, t3a.medium, t3a.large, t3a.xlarge, t3a.2xlarge, m1.small, m1.medium, m1.large, m1.xlarge, m3.medium, m3.large, m3.xlarge, m3.2xlarge, m4.large, m4.xlarge, m4.2xlarge, m4.4xlarge, m4.10xlarge, m4.16xlarge, m2.xlarge, m2.2xlarge, m2.4xlarge, cr1.8xlarge, r3.large, r3.xlarge, r3.2xlarge, r3.4xlarge, r3.8xlarge, r4.large, r4.xlarge, r4.2xlarge, r4.4xlarge, r4.8xlarge, r4.16xlarge, r5.large, r5.xlarge, r5.2xlarge, r5.4xlarge, r5.8xlarge, r5.12xlarge, r5.16xlarge, r5.24xlarge, r5.metal, r5a.large, r5a.xlarge, r5a.2xlarge, r5a.4xlarge, r5a.8xlarge, r5a.12xlarge, r5a.16xlarge, r5a.24xlarge, r5d.large, r5d.xlarge, r5d.2xlarge, r5d.4xlarge, r5d.8xlarge, r5d.12xlarge, r5d.16xlarge, r5d.24xlarge, r5d.metal, r5ad.large, r5ad.xlarge, r5ad.2xlarge, r5ad.4xlarge, r5ad.8xlarge, r5ad.12xlarge, r5ad.16xlarge, r5ad.24xlarge, x1.16xlarge, x1.32xlarge, x1e.xlarge, x1e.2xlarge, x1e.4xlarge, x1e.8xlarge, x1e.16xlarge, x1e.32xlarge, i2.xlarge, i2.2xlarge, i2.4xlarge, i2.8xlarge, i3.large, i3.xlarge, i3.2xlarge, i3.4xlarge, i3.8xlarge, i3.16xlarge, i3.metal, i3en.large, i3en.xlarge, i3en.2xlarge, i3en.3xlarge, i3en.6xlarge, i3en.12xlarge, i3en.24xlarge, i3en.metal, hi1.4xlarge, hs1.8xlarge, c1.medium, c1.xlarge, c3.large, c3.xlarge, c3.2xlarge, c3.4xlarge, c3.8xlarge, c4.large, c4.xlarge, c4.2xlarge, c4.4xlarge, c4.8xlarge, c5.large, c5.xlarge, c5.2xlarge, c5.4xlarge, c5.9xlarge, c5.12xlarge, c5.18xlarge, c5.24xlarge, c5.metal, c5d.large, c5d.xlarge, c5d.2xlarge, c5d.4xlarge, c5d.9xlarge, c5d.18xlarge, c5n.large, c5n.xlarge, c5n.2xlarge, c5n.4xlarge, c5n.9xlarge, c5n.18xlarge, cc1.4xlarge, cc2.8xlarge, g2.2xlarge, g2.8xlarge, g3.4xlarge, g3.8xlarge, g3.16xlarge, g3s.xlarge, g4dn.xlarge, g4dn.2xlarge, g4dn.4xlarge, g4dn.8xlarge, g4dn.12xlarge, g4dn.16xlarge, cg1.4xlarge, p2.xlarge, p2.8xlarge, p2.16xlarge, p3.2xlarge, p3.8xlarge, p3.16xlarge, p3dn.24xlarge, d2.xlarge, d2.2xlarge, d2.4xlarge, d2.8xlarge, f1.2xlarge, f1.4xlarge, f1.16xlarge, m5.large, m5.xlarge, m5.2xlarge, m5.4xlarge, m5.8xlarge, m5.12xlarge, m5.16xlarge, m5.24xlarge, m5.metal, m5a.large, m5a.xlarge, m5a.2xlarge, m5a.4xlarge, m5a.8xlarge, m5a.12xlarge, m5a.16xlarge, m5a.24xlarge, m5d.large, m5d.xlarge, m5d.2xlarge, m5d.4xlarge, m5d.8xlarge, m5d.12xlarge, m5d.16xlarge, m5d.24xlarge, m5d.metal, m5ad.large, m5ad.xlarge, m5ad.2xlarge, m5ad.4xlarge, m5ad.8xlarge, m5ad.12xlarge, m5ad.16xlarge, m5ad.24xlarge, h1.2xlarge, h1.4xlarge, h1.8xlarge, h1.16xlarge, z1d.large, z1d.xlarge, z1d.2xlarge, z1d.3xlarge, z1d.6xlarge, z1d.12xlarge, z1d.metal, u-6tb1.metal, u-9tb1.metal, u-12tb1.metal, u-18tb1.metal, u-24tb1.metal, a1.medium, a1.large, a1.xlarge, a1.2xlarge, a1.4xlarge, a1.metal, m5dn.large, m5dn.xlarge, m5dn.2xlarge, m5dn.4xlarge, m5dn.8xlarge, m5dn.12xlarge, m5dn.16xlarge, m5dn.24xlarge, m5n.large, m5n.xlarge, m5n.2xlarge, m5n.4xlarge, m5n.8xlarge, m5n.12xlarge, m5n.16xlarge, m5n.24xlarge, r5dn.large, r5dn.xlarge, r5dn.2xlarge, r5dn.4xlarge, r5dn.8xlarge, r5dn.12xlarge, r5dn.16xlarge, r5dn.24xlarge, r5n.large, r5n.xlarge, r5n.2xlarge, r5n.4xlarge, r5n.8xlarge, r5n.12xlarge, r5n.16xlarge, r5n.24xlarge. Ipv6AddressCount: 0 # [EC2-VPC] The number of IPv6 addresses to associate with the primary network interface. Ipv6Addresses: # [EC2-VPC] The IPv6 addresses from the range of the subnet to associate with the primary network interface. - Ipv6Address: '' # The IPv6 address. KernelId: '' # The ID of the kernel. KeyName: '' # The name of the key pair. MaxCount: 0 # [REQUIRED] The maximum number of instances to launch. MinCount: 0 # [REQUIRED] The minimum number of instances to launch. Monitoring: # Specifies whether detailed monitoring is enabled for the instance. Enabled: true # [REQUIRED] Indicates whether detailed monitoring is enabled. Placement: # The placement for the instance. AvailabilityZone: '' # The Availability Zone of the instance. Affinity: '' # The affinity setting for the instance on the Dedicated Host. GroupName: '' # The name of the placement group the instance is in. PartitionNumber: 0 # The number of the partition the instance is in. HostId: '' # The ID of the Dedicated Host on which the instance resides. Tenancy: dedicated # The tenancy of the instance (if the instance is running in a VPC). Valid values are: default, dedicated, host. SpreadDomain: '' # Reserved for future use. RamdiskId: '' # The ID of the RAM disk to select. SecurityGroupIds: # The IDs of the security groups. - '' SecurityGroups: # [default VPC] The names of the security groups. - '' SubnetId: '' # [EC2-VPC] The ID of the subnet to launch the instance into. UserData: '' # The user data to make available to the instance. AdditionalInfo: '' # Reserved. ClientToken: '' # Unique, case-sensitive identifier you provide to ensure the idempotency of the request. DisableApiTermination: true # If you set this parameter to true, you can't terminate the instance using the Amazon EC2 console, CLI, or API; otherwise, you can. DryRun: true # Checks whether you have the required permissions for the action, without actually making the request, and provides an error response. EbsOptimized: true # Indicates whether the instance is optimized for Amazon EBS I/O. IamInstanceProfile: # The IAM instance profile. Arn: '' # The Amazon Resource Name (ARN) of the instance profile. Name: '' # The name of the instance profile. InstanceInitiatedShutdownBehavior: stop # Indicates whether an instance stops or terminates when you initiate shutdown from the instance (using the operating system command for system shutdown). Valid values are: stop, terminate. NetworkInterfaces: # The network interfaces to associate with the instance. - AssociatePublicIpAddress: true # Indicates whether to assign a public IPv4 address to an instance you launch in a VPC. DeleteOnTermination: true # If set to true, the interface is deleted when the instance is terminated. Description: '' # The description of the network interface. DeviceIndex: 0 # The position of the network interface in the attachment order. Groups: # The IDs of the security groups for the network interface. - '' Ipv6AddressCount: 0 # A number of IPv6 addresses to assign to the network interface. Ipv6Addresses: # One or more IPv6 addresses to assign to the network interface. - Ipv6Address: '' # The IPv6 address. NetworkInterfaceId: '' # The ID of the network interface. PrivateIpAddress: '' # The private IPv4 address of the network interface. PrivateIpAddresses: # One or more private IPv4 addresses to assign to the network interface. - Primary: true # Indicates whether the private IPv4 address is the primary private IPv4 address. PrivateIpAddress: '' # The private IPv4 addresses. SecondaryPrivateIpAddressCount: 0 # The number of secondary private IPv4 addresses. SubnetId: '' # The ID of the subnet associated with the network interface. InterfaceType: '' # The type of network interface. PrivateIpAddress: '' # [EC2-VPC] The primary IPv4 address. ElasticGpuSpecification: # An elastic GPU to associate with the instance. - Type: '' # [REQUIRED] The type of Elastic Graphics accelerator. ElasticInferenceAccelerators: # An elastic inference accelerator to associate with the instance. - Type: '' # [REQUIRED] The type of elastic inference accelerator. TagSpecifications: # The tags to apply to the resources during launch. - ResourceType: network-interface # The type of resource to tag. Valid values are: client-vpn-endpoint, customer-gateway, dedicated-host, dhcp-options, elastic-ip, fleet, fpga-image, host-reservation, image, instance, internet-gateway, launch-template, natgateway, network-acl, network-interface, reserved-instances, route-table, security-group, snapshot, spot-instances-request, subnet, traffic-mirror-filter, traffic-mirror-session, traffic-mirror-target, transit-gateway, transit-gateway-attachment, transit-gateway-route-table, volume, vpc, vpc-peering-connection, vpn-connection, vpn-gateway. Tags: # The tags to apply to the resource. - Key: '' # The key of the tag. Value: '' # The value of the tag. LaunchTemplate: # The launch template to use to launch the instances. LaunchTemplateId: '' # The ID of the launch template. LaunchTemplateName: '' # The name of the launch template. Version: '' # The version number of the launch template. InstanceMarketOptions: # The market (purchasing) option for the instances. MarketType: spot # The market type. Valid values are: spot. SpotOptions: # The options for Spot Instances. MaxPrice: '' # The maximum hourly price you're willing to pay for the Spot Instances. SpotInstanceType: one-time # The Spot Instance request type. Valid values are: one-time, persistent. BlockDurationMinutes: 0 # The required duration for the Spot Instances (also known as Spot blocks), in minutes. ValidUntil: 1970-01-01 00:00:00 # The end date of the request. InstanceInterruptionBehavior: terminate # The behavior when a Spot Instance is interrupted. Valid values are: hibernate, stop, terminate. CreditSpecification: # The credit option for CPU usage of the T2 or T3 instance. CpuCredits: '' # [REQUIRED] The credit option for CPU usage of a T2 or T3 instance. CpuOptions: # The CPU options for the instance. CoreCount: 0 # The number of CPU cores for the instance. ThreadsPerCore: 0 # The number of threads per CPU core. CapacityReservationSpecification: # Information about the Capacity Reservation targeting option. CapacityReservationPreference: none # Indicates the instance's Capacity Reservation preferences. Valid values are: open, none. CapacityReservationTarget: # Information about the target Capacity Reservation. CapacityReservationId: '' # The ID of the Capacity Reservation. HibernationOptions: # Indicates whether an instance is enabled for hibernation. Configured: true # If you set this parameter to true, your instance is enabled for hibernation. LicenseSpecifications: # The license configurations. - LicenseConfigurationArn: '' # The Amazon Resource Name (ARN) of the license configuration.

コマンドスケルトンを生成生成する

パラメータスケルトンファイルを生成して使用するには
  1. --generate-cli-skeleton パラメータを指定してコマンドを実行して JSON または YAML を生成し、出力を保存用ファイルに送ります。

    JSON
    $ aws ec2 run-instances --generate-cli-skeleton input > ec2runinst.json
    YAML
    $ aws ec2 run-instances --generate-cli-skeleton yaml-input > ec2runinst.yaml
  2. テキストエディタでパラメータスケルトンファイルを開き、不要なパラメータを削除します。例えば、テンプレートを次のように削除できます。不要な要素を削除した後、ファイルがまだ有効な JSON または YAML であることを確認してください。

    JSON
    { "DryRun": true, "ImageId": "", "KeyName": "", "SecurityGroups": [ "" ], "InstanceType": "", "Monitoring": { "Enabled": true } }
    YAML
    DryRun: true ImageId: '' KeyName: '' SecurityGroups: - '' InstanceType: Monitoring: Enabled: true

    この例では、Amazon EC2 ドライラン機能を使用するには、DryRun パラメータを true に設定したままにします。この機能を使用すると、実際にリソースを作成または変更することなく、コマンドを安全にテストできます。

  3. 残りの値には、シナリオに適した値を入力します。この例では、インスタンスタイプ、キー名、セキュリティグループ、および使用する Amazon マシンイメージ (AMI) の識別子を指定しています。この例では、デフォルトの AWS リージョンを前提としています。AMI ami-dfc39aef は、us-west-2 リージョンでホストされている 64 ビットの Amazon Linux イメージです。別のリージョンを使用する場合は、使用する正しい AMI ID を見つける必要があります

    JSON
    { "DryRun": true, "ImageId": "ami-dfc39aef", "KeyName": "mykey", "SecurityGroups": [ "my-sg" ], "InstanceType": "t2.micro", "Monitoring": { "Enabled": true } }
    YAML
    DryRun: true ImageId: 'ami-dfc39aef' KeyName: 'mykey' SecurityGroups: - 'my-sg' InstanceType: 't2.micro' Monitoring: Enabled: true
  4. file:// プレフィックスを使用して、完了したテンプレートファイルを --cli-input-json または cli-input-yaml パラメータに渡すことによって、入力済みパラメータでコマンドを実行します。AWS CLI はパスを現在の作業ディレクトリに対する相対パスとして解釈するため、パスを付けずにファイル名だけを表示する次の例は、現在の作業ディレクトリ内で直接検索されます。

    JSON
    $ aws ec2 run-instances --cli-input-json file://ec2runinst.json
    A client error (DryRunOperation) occurred when calling the RunInstances operation: Request would have succeeded, but DryRun flag is set.
    YAML
    $ aws ec2 run-instances --cli-input-yaml file://ec2runinst.yaml
    A client error (DryRunOperation) occurred when calling the RunInstances operation: Request would have succeeded, but DryRun flag is set.

    リハーサルのエラーは、JSON または YAML の形式が正しく、パラメータ値が有効であることを示します。出力でその他の問題が報告された場合は、それを修正し、「Request would have succeeded」というメッセージが表示されるまで前のステップを繰り返します。

  5. これで、DryRun パラメータを false に設定して、dry run を無効にできます。

    JSON
    { "DryRun": false, "ImageId": "ami-dfc39aef", "KeyName": "mykey", "SecurityGroups": [ "my-sg" ], "InstanceType": "t2.micro", "Monitoring": { "Enabled": true } }
    YAML
    DryRun: false ImageId: 'ami-dfc39aef' KeyName: 'mykey' SecurityGroups: - 'my-sg' InstanceType: 't2.micro' Monitoring: Enabled: true
  6. コマンドを実行すると、run-instances は Amazon EC2 インスタンスを実際に起動し、正常起動によって生成された詳細を表示します。出力の形式は、入力パラメータテンプレートの形式とは別に、--output パラメータによって制御されます。

    JSON
    $ aws ec2 run-instances --cli-input-json file://ec2runinst.json --output json
    { "OwnerId": "123456789012", "ReservationId": "r-d94a2b1", "Groups": [], "Instances": [ ...
    YAML
    $ aws ec2 run-instances --cli-input-yaml file://ec2runinst.yaml --output yaml
    OwnerId: '123456789012' ReservationId: 'r-d94a2b1', Groups": - '' Instances: ...