AWS SDK Version 2 for .NET
API Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

.NET Framework 4.5
 

Classes

NameDescription
Class AddHeaderAction When included in a receipt rule, this action adds a header to the received email.

For information about adding a header using a receipt rule, see the Amazon SES Developer Guide.

Class AlreadyExistsException SimpleEmailService exception
Class Body Represents the body of the message. You can specify text, HTML, or both. If you use both, then the message should display correctly in the widest variety of email clients.
Class BounceAction When included in a receipt rule, this action rejects the received email by returning a bounce response to the sender and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS).

For information about sending a bounce message in response to a received email, see the Amazon SES Developer Guide.

Class BouncedRecipientInfo Recipient-related information to include in the Delivery Status Notification (DSN) when an email that Amazon SES receives on your behalf bounces.

For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

Class CannotDeleteException SimpleEmailService exception
Class CloneReceiptRuleSetRequest Container for the parameters to the CloneReceiptRuleSet operation. Creates a receipt rule set by cloning an existing one. All receipt rules and configurations are copied to the new receipt rule set and are completely independent of the source rule set.

For information about setting up rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class CloneReceiptRuleSetResponse Configuration for accessing Amazon CloneReceiptRuleSet service
Class CloneReceiptRuleSetResult
Class Content Represents textual data, plus an optional character set specification.

By default, the text must be 7-bit ASCII, due to the constraints of the SMTP protocol. If the text must contain any other characters, then you must also specify a character set. Examples include UTF-8, ISO-8859-1, and Shift_JIS.

Class CreateReceiptFilterRequest Container for the parameters to the CreateReceiptFilter operation. Creates a new IP address filter.

For information about setting up IP address filters, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class CreateReceiptFilterResponse Configuration for accessing Amazon CreateReceiptFilter service
Class CreateReceiptFilterResult
Class CreateReceiptRuleRequest Container for the parameters to the CreateReceiptRule operation. Creates a receipt rule.

For information about setting up receipt rules, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class CreateReceiptRuleResponse Configuration for accessing Amazon CreateReceiptRule service
Class CreateReceiptRuleResult
Class CreateReceiptRuleSetRequest Container for the parameters to the CreateReceiptRuleSet operation. Creates an empty receipt rule set.

For information about setting up receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class CreateReceiptRuleSetResponse Configuration for accessing Amazon CreateReceiptRuleSet service
Class CreateReceiptRuleSetResult
Class DeleteIdentityPolicyRequest Container for the parameters to the DeleteIdentityPolicy operation. Deletes the specified sending authorization policy for the given identity (email address or domain). This API returns successfully even if a policy with the specified name does not exist. This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class DeleteIdentityPolicyResponse Configuration for accessing Amazon DeleteIdentityPolicy service
Class DeleteIdentityPolicyResult
Class DeleteIdentityRequest Container for the parameters to the DeleteIdentity operation. Deletes the specified identity (email address or domain) from the list of verified identities.

This action is throttled at one request per second.

Class DeleteIdentityResponse Configuration for accessing Amazon DeleteIdentity service
Class DeleteIdentityResult
Class DeleteReceiptFilterRequest Container for the parameters to the DeleteReceiptFilter operation. Deletes the specified IP address filter.

For information about managing IP address filters, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class DeleteReceiptFilterResponse Configuration for accessing Amazon DeleteReceiptFilter service
Class DeleteReceiptFilterResult
Class DeleteReceiptRuleRequest Container for the parameters to the DeleteReceiptRule operation. Deletes the specified receipt rule.

For information about managing receipt rules, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class DeleteReceiptRuleResponse Configuration for accessing Amazon DeleteReceiptRule service
Class DeleteReceiptRuleResult
Class DeleteReceiptRuleSetRequest Container for the parameters to the DeleteReceiptRuleSet operation. Deletes the specified receipt rule set and all of the receipt rules it contains. The currently active rule set cannot be deleted.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class DeleteReceiptRuleSetResponse Configuration for accessing Amazon DeleteReceiptRuleSet service
Class DeleteReceiptRuleSetResult
Class DeleteVerifiedEmailAddressRequest Container for the parameters to the DeleteVerifiedEmailAddress operation. Deletes the specified email address from the list of verified addresses. The DeleteVerifiedEmailAddress action is deprecated as of the May 15, 2012 release of Domain Verification. The DeleteIdentity action is now preferred.

This action is throttled at one request per second.

Class DeleteVerifiedEmailAddressResponse
Class DescribeActiveReceiptRuleSetRequest Container for the parameters to the DescribeActiveReceiptRuleSet operation. Returns the metadata and receipt rules for the receipt rule set that is currently active.

For information about setting up receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class DescribeActiveReceiptRuleSetResponse Configuration for accessing Amazon DescribeActiveReceiptRuleSet service
Class DescribeActiveReceiptRuleSetResult
Class DescribeReceiptRuleRequest Container for the parameters to the DescribeReceiptRule operation. Returns the details of the specified receipt rule.

For information about setting up receipt rules, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class DescribeReceiptRuleResponse Configuration for accessing Amazon DescribeReceiptRule service
Class DescribeReceiptRuleResult
Class DescribeReceiptRuleSetRequest Container for the parameters to the DescribeReceiptRuleSet operation. Returns the details of the specified receipt rule set.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class DescribeReceiptRuleSetResponse Configuration for accessing Amazon DescribeReceiptRuleSet service
Class DescribeReceiptRuleSetResult
Class Destination Represents the destination of the message, consisting of To:, CC:, and BCC: fields.

By default, the string must be 7-bit ASCII. If the text must contain any other characters, then you must use MIME encoded-word syntax (RFC 2047) instead of a literal string. MIME encoded-word syntax uses the following form: =?charset?encoding?encoded-text?=. For more information, see RFC 2047.

Class ExtensionField Additional X-headers to include in the Delivery Status Notification (DSN) when an email that Amazon SES receives on your behalf bounces.

For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

Class GetIdentityDkimAttributesRequest Container for the parameters to the GetIdentityDkimAttributes operation. Returns the current status of Easy DKIM signing for an entity. For domain name identities, this action also returns the DKIM tokens that are required for Easy DKIM signing, and whether Amazon SES has successfully verified that these tokens have been published.

This action takes a list of identities as input and returns the following information for each:

  • Whether Easy DKIM signing is enabled or disabled.
  • A set of DKIM tokens that represent the identity. If the identity is an email address, the tokens represent the domain of that address.
  • Whether Amazon SES has successfully verified the DKIM tokens published in the domain's DNS. This information is only returned for domain name identities, not for email addresses.

This action is throttled at one request per second and can only get DKIM attributes for up to 100 identities at a time.

For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

Class GetIdentityDkimAttributesResponse Configuration for accessing Amazon GetIdentityDkimAttributes service
Class GetIdentityDkimAttributesResult
Class GetIdentityNotificationAttributesRequest Container for the parameters to the GetIdentityNotificationAttributes operation. Given a list of verified identities (email addresses and/or domains), returns a structure describing identity notification attributes.

This action is throttled at one request per second and can only get notification attributes for up to 100 identities at a time.

For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

Class GetIdentityNotificationAttributesResponse Configuration for accessing Amazon GetIdentityNotificationAttributes service
Class GetIdentityNotificationAttributesResult
Class GetIdentityPoliciesRequest Container for the parameters to the GetIdentityPolicies operation. Returns the requested sending authorization policies for the given identity (email address or domain). The policies are returned as a map of policy names to policy contents. You can retrieve a maximum of 20 policies at a time. This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class GetIdentityPoliciesResponse Configuration for accessing Amazon GetIdentityPolicies service
Class GetIdentityPoliciesResult
Class GetIdentityVerificationAttributesRequest Container for the parameters to the GetIdentityVerificationAttributes operation. Given a list of identities (email addresses and/or domains), returns the verification status and (for domain identities) the verification token for each identity.

This action is throttled at one request per second and can only get verification attributes for up to 100 identities at a time.

Class GetIdentityVerificationAttributesResponse Configuration for accessing Amazon GetIdentityVerificationAttributes service
Class GetIdentityVerificationAttributesResult
Class GetSendQuotaRequest Container for the parameters to the GetSendQuota operation. Returns the user's current sending limits.

This action is throttled at one request per second.

Class GetSendQuotaResponse Configuration for accessing Amazon GetSendQuota service
Class GetSendQuotaResult
Class GetSendStatisticsRequest Container for the parameters to the GetSendStatistics operation. Returns the user's sending statistics. The result is a list of data points, representing the last two weeks of sending activity.

Each data point in the list contains statistics for a 15-minute interval.

This action is throttled at one request per second.

Class GetSendStatisticsResponse Configuration for accessing Amazon GetSendStatistics service
Class GetSendStatisticsResult
Class IdentityDkimAttributes Represents the DKIM attributes of a verified email address or a domain.
Class IdentityNotificationAttributes Represents the notification attributes of an identity, including whether an identity has Amazon Simple Notification Service (Amazon SNS) topics set for bounce, complaint, and/or delivery notifications, and whether feedback forwarding is enabled for bounce and complaint notifications.
Class IdentityVerificationAttributes Represents the verification attributes of a single identity.
Class InvalidLambdaFunctionException SimpleEmailService exception
Class InvalidPolicyException SimpleEmailService exception
Class InvalidS3ConfigurationException SimpleEmailService exception
Class InvalidSnsTopicException SimpleEmailService exception
Class LambdaAction When included in a receipt rule, this action calls an AWS Lambda function and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS).

To enable Amazon SES to call your AWS Lambda function or to publish to an Amazon SNS topic of another account, Amazon SES must have permission to access those resources. For information about giving permissions, see the Amazon SES Developer Guide.

For information about using AWS Lambda actions in receipt rules, see the Amazon SES Developer Guide.

Class LimitExceededException SimpleEmailService exception
Class ListIdentitiesRequest Container for the parameters to the ListIdentities operation. Returns a list containing all of the identities (email addresses and domains) for a specific AWS Account, regardless of verification status.

This action is throttled at one request per second.

Class ListIdentitiesResponse Configuration for accessing Amazon ListIdentities service
Class ListIdentitiesResult
Class ListIdentityPoliciesRequest Container for the parameters to the ListIdentityPolicies operation. Returns a list of sending authorization policies that are attached to the given identity (email address or domain). This API returns only a list. If you want the actual policy content, you can use GetIdentityPolicies. This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class ListIdentityPoliciesResponse Configuration for accessing Amazon ListIdentityPolicies service
Class ListIdentityPoliciesResult
Class ListReceiptFiltersRequest Container for the parameters to the ListReceiptFilters operation. Lists the IP address filters associated with your account.

For information about managing IP address filters, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class ListReceiptFiltersResponse Configuration for accessing Amazon ListReceiptFilters service
Class ListReceiptFiltersResult
Class ListReceiptRuleSetsRequest Container for the parameters to the ListReceiptRuleSets operation. Lists the receipt rule sets that exist under your AWS account. If there are additional receipt rule sets to be retrieved, you will receive a NextToken that you can provide to the next call to ListReceiptRuleSets to retrieve the additional entries.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class ListReceiptRuleSetsResponse Configuration for accessing Amazon ListReceiptRuleSets service
Class ListReceiptRuleSetsResult
Class ListVerifiedEmailAddressesRequest Container for the parameters to the ListVerifiedEmailAddresses operation. Returns a list containing all of the email addresses that have been verified. The ListVerifiedEmailAddresses action is deprecated as of the May 15, 2012 release of Domain Verification. The ListIdentities action is now preferred.

This action is throttled at one request per second.

Class ListVerifiedEmailAddressesResponse Configuration for accessing Amazon ListVerifiedEmailAddresses service
Class ListVerifiedEmailAddressesResult
Class Message Represents the message to be sent, composed of a subject and a body.
Class MessageDsn Message-related information to include in the Delivery Status Notification (DSN) when an email that Amazon SES receives on your behalf bounces.

For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

Class MessageRejectedException SimpleEmailService exception
Class PutIdentityPolicyRequest Container for the parameters to the PutIdentityPolicy operation. Adds or updates a sending authorization policy for the specified identity (email address or domain). This API is for the identity owner only. If you have not verified the identity, this API will return an error.

Sending authorization is a feature that enables an identity owner to authorize other senders to use its identities. For information about using sending authorization, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class PutIdentityPolicyResponse Configuration for accessing Amazon PutIdentityPolicy service
Class PutIdentityPolicyResult
Class RawMessage Represents the raw data of the message.
Class ReceiptAction An action that Amazon SES can take when it receives an email on behalf of one or more email addresses or domains that you own. An instance of this data type can represent only one action.

For information about setting up receipt rules, see the Amazon SES Developer Guide.

Class ReceiptFilter A receipt IP address filter enables you to specify whether to accept or reject mail originating from an IP address or range of IP addresses.

For information about setting up IP address filters, see the Amazon SES Developer Guide.

Class ReceiptIpFilter A receipt IP address filter enables you to specify whether to accept or reject mail originating from an IP address or range of IP addresses.

For information about setting up IP address filters, see the Amazon SES Developer Guide.

Class ReceiptRule Receipt rules enable you to specify which actions Amazon SES should take when it receives mail on behalf of one or more email addresses or domains that you own.

Each receipt rule defines a set of email addresses or domains to which it applies. If the email addresses or domains match at least one recipient address of the message, Amazon SES executes all of the receipt rule's actions on the message.

For information about setting up receipt rules, see the Amazon SES Developer Guide.

Class ReceiptRuleSetMetadata Information about a receipt rule set.

A receipt rule set is a collection of rules that specify what Amazon SES should do with mail it receives on behalf of your account's verified domains.

For information about setting up receipt rule sets, see the Amazon SES Developer Guide.

Class RecipientDsnFields Recipient-related information to include in the Delivery Status Notification (DSN) when an email that Amazon SES receives on your behalf bounces.

For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

Class ReorderReceiptRuleSetRequest Container for the parameters to the ReorderReceiptRuleSet operation. Reorders the receipt rules within a receipt rule set. All of the rules in the rule set must be represented in this request. That is, this API will return an error if the reorder request doesn't explicitly position all of the rules.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class ReorderReceiptRuleSetResponse Configuration for accessing Amazon ReorderReceiptRuleSet service
Class ReorderReceiptRuleSetResult
Class RuleDoesNotExistException SimpleEmailService exception
Class RuleSetDoesNotExistException SimpleEmailService exception
Class S3Action When included in a receipt rule, this action saves the received message to an Amazon Simple Storage Service (Amazon S3) bucket and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS).

To enable Amazon SES to write emails to your Amazon S3 bucket, use an AWS KMS key to encrypt your emails, or publish to an Amazon SNS topic of another account, Amazon SES must have permission to access those resources. For information about giving permissions, see the Amazon SES Developer Guide.

When you save your emails to an Amazon S3 bucket, the maximum email size (including headers) is 30 MB. Emails larger than that will bounce.

For information about specifying Amazon S3 actions in receipt rules, see the Amazon SES Developer Guide.

Class SendBounceRequest Container for the parameters to the SendBounce operation. Generates and sends a bounce message to the sender of an email you received through Amazon SES. You can only use this API on an email up to 24 hours after you receive it. You cannot use this API to send generic bounces for mail that was not received by Amazon SES.

For information about receiving email through Amazon SES, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class SendBounceResponse Configuration for accessing Amazon SendBounce service
Class SendBounceResult
Class SendDataPoint Represents sending statistics data. Each SendDataPoint contains statistics for a 15-minute period of sending activity.
Class SendEmailRequest Container for the parameters to the SendEmail operation. Composes an email message based on input data, and then immediately queues the message for sending.

There are several important points to know about SendEmail:

  • You can only send email from verified email addresses and domains; otherwise, you will get an "Email address not verified" error. If your account is still in the Amazon SES sandbox, you must also verify every recipient email address except for the recipients provided by the Amazon SES mailbox simulator. For more information, go to the Amazon SES Developer Guide.
  • The total size of the message cannot exceed 10 MB. This includes any attachments that are part of the message.
  • Amazon SES has a limit on the total number of recipients per message. The combined number of To:, CC: and BCC: email addresses cannot exceed 50. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call Amazon SES repeatedly to send the message to each group.
  • For every message that you send, the total number of recipients (To:, CC: and BCC:) is counted against your sending quota - the maximum number of emails you can send in a 24-hour period. For information about your sending quota, go to the Amazon SES Developer Guide.
Class SendEmailResponse Configuration for accessing Amazon SendEmail service
Class SendEmailResult
Class SendRawEmailRequest Container for the parameters to the SendRawEmail operation. Sends an email message, with header and content specified by the client. The SendRawEmail action is useful for sending multipart MIME emails. The raw text of the message must comply with Internet email standards; otherwise, the message cannot be sent.

There are several important points to know about SendRawEmail:

  • You can only send email from verified email addresses and domains; otherwise, you will get an "Email address not verified" error. If your account is still in the Amazon SES sandbox, you must also verify every recipient email address except for the recipients provided by the Amazon SES mailbox simulator. For more information, go to the Amazon SES Developer Guide.
  • The total size of the message cannot exceed 10 MB. This includes any attachments that are part of the message.
  • Amazon SES has a limit on the total number of recipients per message. The combined number of To:, CC: and BCC: email addresses cannot exceed 50. If you need to send an email message to a larger audience, you can divide your recipient list into groups of 50 or fewer, and then call Amazon SES repeatedly to send the message to each group.
  • The To:, CC:, and BCC: headers in the raw message can contain a group list. Note that each recipient in a group list counts towards the 50-recipient limit.
  • For every message that you send, the total number of recipients (To:, CC: and BCC:) is counted against your sending quota - the maximum number of emails you can send in a 24-hour period. For information about your sending quota, go to the Amazon SES Developer Guide.
  • If you are using sending authorization to send on behalf of another user, SendRawEmail enables you to specify the cross-account identity for the email's "Source," "From," and "Return-Path" parameters in one of two ways: you can pass optional parameters SourceArn, FromArn, and/or ReturnPathArn to the API, or you can include the following X-headers in the header of your raw email:
    • X-SES-SOURCE-ARN
    • X-SES-FROM-ARN
    • X-SES-RETURN-PATH-ARN
    Do not include these X-headers in the DKIM signature, because they are removed by Amazon SES before sending the email. For the most common sending authorization use case, we recommend that you specify the SourceIdentityArn and do not specify either the FromIdentityArn or ReturnPathIdentityArn. (The same note applies to the corresponding X-headers.) If you only specify the SourceIdentityArn, Amazon SES will simply set the "From" address and the "Return Path" address to the identity specified in SourceIdentityArn. For more information about sending authorization, see the Amazon SES Developer Guide.
Class SendRawEmailResponse Configuration for accessing Amazon SendRawEmail service
Class SendRawEmailResult
Class SetActiveReceiptRuleSetRequest Container for the parameters to the SetActiveReceiptRuleSet operation. Sets the specified receipt rule set as the active receipt rule set. To disable your email-receiving through Amazon SES completely, you can call this API with RuleSetName set to null.

For information about managing receipt rule sets, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class SetActiveReceiptRuleSetResponse Configuration for accessing Amazon SetActiveReceiptRuleSet service
Class SetActiveReceiptRuleSetResult
Class SetIdentityDkimEnabledRequest Container for the parameters to the SetIdentityDkimEnabled operation. Enables or disables Easy DKIM signing of email sent from an identity:
  • If Easy DKIM signing is enabled for a domain name identity (e.g., example.com), then Amazon SES will DKIM-sign all email sent by addresses under that domain name (e.g., user@example.com).
  • If Easy DKIM signing is enabled for an email address, then Amazon SES will DKIM-sign all email sent by that email address.

For email addresses (e.g., user@example.com), you can only enable Easy DKIM signing if the corresponding domain (e.g., example.com) has been set up for Easy DKIM using the AWS Console or the VerifyDomainDkim action.

This action is throttled at one request per second.

For more information about Easy DKIM signing, go to the Amazon SES Developer Guide.

Class SetIdentityDkimEnabledResponse Configuration for accessing Amazon SetIdentityDkimEnabled service
Class SetIdentityDkimEnabledResult
Class SetIdentityFeedbackForwardingEnabledRequest Container for the parameters to the SetIdentityFeedbackForwardingEnabled operation. Given an identity (email address or domain), enables or disables whether Amazon SES forwards bounce and complaint notifications as email. Feedback forwarding can only be disabled when Amazon Simple Notification Service (Amazon SNS) topics are specified for both bounces and complaints. Feedback forwarding does not apply to delivery notifications. Delivery notifications are only available through Amazon SNS.

This action is throttled at one request per second.

For more information about using notifications with Amazon SES, see the Amazon SES Developer Guide.

Class SetIdentityFeedbackForwardingEnabledResponse Configuration for accessing Amazon SetIdentityFeedbackForwardingEnabled service
Class SetIdentityFeedbackForwardingEnabledResult
Class SetIdentityNotificationTopicRequest Container for the parameters to the SetIdentityNotificationTopic operation. Given an identity (email address or domain), sets the Amazon Simple Notification Service (Amazon SNS) topic to which Amazon SES will publish bounce, complaint, and/or delivery notifications for emails sent with that identity as the Source. Unless feedback forwarding is enabled, you must specify Amazon SNS topics for bounce and complaint notifications. For more information, see SetIdentityFeedbackForwardingEnabled.

This action is throttled at one request per second.

For more information about feedback notification, see the Amazon SES Developer Guide.

Class SetIdentityNotificationTopicResponse Configuration for accessing Amazon SetIdentityNotificationTopic service
Class SetIdentityNotificationTopicResult
Class SetReceiptRulePositionRequest Container for the parameters to the SetReceiptRulePosition operation. Sets the position of the specified receipt rule in the receipt rule set.

For information about managing receipt rules, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class SetReceiptRulePositionResponse Configuration for accessing Amazon SetReceiptRulePosition service
Class SetReceiptRulePositionResult
Class SNSAction When included in a receipt rule, this action publishes a notification to Amazon Simple Notification Service (Amazon SNS). This action includes a complete copy of the email content in the Amazon SNS notifications. Amazon SNS notifications for all other actions simply provide information about the email. They do not include the email content itself.

If you own the Amazon SNS topic, you don't need to do anything to give Amazon SES permission to publish emails to it. However, if you don't own the Amazon SNS topic, you need to attach a policy to the topic to give Amazon SES permissions to access it. For information about giving permissions, see the Amazon SES Developer Guide.

You can only publish emails that are 150 KB or less (including the header) to Amazon SNS. Larger emails will bounce. If you anticipate emails larger than 150 KB, use the S3 action instead.

For information about using a receipt rule to publish an Amazon SNS notification, see the Amazon SES Developer Guide.

Class StopAction When included in a receipt rule, this action terminates the evaluation of the receipt rule set and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS).

For information about setting a stop action in a receipt rule, see the Amazon SES Developer Guide.

Class UpdateReceiptRuleRequest Container for the parameters to the UpdateReceiptRule operation. Updates a receipt rule.

For information about managing receipt rules, see the Amazon SES Developer Guide.

This action is throttled at one request per second.

Class UpdateReceiptRuleResponse Configuration for accessing Amazon UpdateReceiptRule service
Class UpdateReceiptRuleResult
Class VerifyDomainDkimRequest Container for the parameters to the VerifyDomainDkim operation. Returns a set of DKIM tokens for a domain. DKIM tokens are character strings that represent your domain's identity. Using these tokens, you will need to create DNS CNAME records that point to DKIM public keys hosted by Amazon SES. Amazon Web Services will eventually detect that you have updated your DNS records; this detection process may take up to 72 hours. Upon successful detection, Amazon SES will be able to DKIM-sign email originating from that domain.

This action is throttled at one request per second.

To enable or disable Easy DKIM signing for a domain, use the SetIdentityDkimEnabled action.

For more information about creating DNS records using DKIM tokens, go to the Amazon SES Developer Guide.

Class VerifyDomainDkimResponse Configuration for accessing Amazon VerifyDomainDkim service
Class VerifyDomainDkimResult
Class VerifyDomainIdentityRequest Container for the parameters to the VerifyDomainIdentity operation. Verifies a domain.

This action is throttled at one request per second.

Class VerifyDomainIdentityResponse Configuration for accessing Amazon VerifyDomainIdentity service
Class VerifyDomainIdentityResult
Class VerifyEmailAddressRequest Container for the parameters to the VerifyEmailAddress operation. Verifies an email address. This action causes a confirmation email message to be sent to the specified address. The VerifyEmailAddress action is deprecated as of the May 15, 2012 release of Domain Verification. The VerifyEmailIdentity action is now preferred.

This action is throttled at one request per second.

Class VerifyEmailAddressResponse
Class VerifyEmailIdentityRequest Container for the parameters to the VerifyEmailIdentity operation. Verifies an email address. This action causes a confirmation email message to be sent to the specified address.

This action is throttled at one request per second.

Class VerifyEmailIdentityResponse Configuration for accessing Amazon VerifyEmailIdentity service
Class VerifyEmailIdentityResult
Class WorkmailAction When included in a receipt rule, this action calls Amazon WorkMail and, optionally, publishes a notification to Amazon Simple Notification Service (Amazon SNS). You will typically not use this action directly because Amazon WorkMail adds the rule automatically during its setup procedure.

For information using a receipt rule to call Amazon WorkMail, see the Amazon SES Developer Guide.