Options
All
  • Public
  • Public/Protected
  • All
Menu

Namespace CopyObjectRequest

Hierarchy

Index

Properties

Optional ACL

ACL: ObjectCannedACL | string

The canned ACL to apply to the object.

This action is not supported by Amazon S3 on Outposts.

Bucket

Bucket: string | undefined

The name of the destination bucket.

When using this action with an access point, you must direct requests to the access point hostname. The access point hostname takes the form AccessPointName-AccountId.s3-accesspoint.Region.amazonaws.com. When using this action with an access point through the Amazon Web Services SDKs, you provide the access point ARN in place of the bucket name. For more information about access point ARNs, see Using access points in the Amazon S3 User Guide.

When using this action with Amazon S3 on Outposts, you must direct requests to the S3 on Outposts hostname. The S3 on Outposts hostname takes the form AccessPointName-AccountId.outpostID.s3-outposts.Region.amazonaws.com. When using this action with S3 on Outposts through the Amazon Web Services SDKs, you provide the Outposts bucket ARN in place of the bucket name. For more information about S3 on Outposts ARNs, see Using Amazon S3 on Outposts in the Amazon S3 User Guide.

Note: To supply the Multi-region Access Point (MRAP) to Bucket, you need to install the "@aws-sdk/signature-v4-crt" package to your project dependencies. For more information, please go to https://github.com/aws/aws-sdk-js-v3#known-issues

Optional BucketKeyEnabled

BucketKeyEnabled: undefined | false | true

Specifies whether Amazon S3 should use an S3 Bucket Key for object encryption with server-side encryption using AWS KMS (SSE-KMS). Setting this header to true causes Amazon S3 to use an S3 Bucket Key for object encryption with SSE-KMS.

Specifying this header with a COPY action doesn’t affect bucket-level settings for S3 Bucket Key.

Optional CacheControl

CacheControl: undefined | string

Specifies caching behavior along the request/reply chain.

Optional ChecksumAlgorithm

ChecksumAlgorithm: ChecksumAlgorithm | string

Indicates the algorithm you want Amazon S3 to use to create the checksum for the object. For more information, see Checking object integrity in the Amazon S3 User Guide.

Optional ContentDisposition

ContentDisposition: undefined | string

Specifies presentational information for the object.

Optional ContentEncoding

ContentEncoding: undefined | string

Specifies what content encodings have been applied to the object and thus what decoding mechanisms must be applied to obtain the media-type referenced by the Content-Type header field.

Optional ContentLanguage

ContentLanguage: undefined | string

The language the content is in.

Optional ContentType

ContentType: undefined | string

A standard MIME type describing the format of the object data.

CopySource

CopySource: string | undefined

Specifies the source object for the copy operation. You specify the value in one of two formats, depending on whether you want to access the source object through an access point:

  • For objects not accessed through an access point, specify the name of the source bucket and the key of the source object, separated by a slash (/). For example, to copy the object reports/january.pdf from the bucket awsexamplebucket, use awsexamplebucket/reports/january.pdf. The value must be URL-encoded.

  • For objects accessed through access points, specify the Amazon Resource Name (ARN) of the object as accessed through the access point, in the format arn:aws:s3:::accesspoint//object/. For example, to copy the object reports/january.pdf through access point my-access-point owned by account 123456789012 in Region us-west-2, use the URL encoding of arn:aws:s3:us-west-2:123456789012:accesspoint/my-access-point/object/reports/january.pdf. The value must be URL encoded.

    Amazon S3 supports copy operations using access points only when the source and destination buckets are in the same Amazon Web Services Region.

    Alternatively, for objects accessed through Amazon S3 on Outposts, specify the ARN of the object as accessed in the format arn:aws:s3-outposts:::outpost//object/. For example, to copy the object reports/january.pdf through outpost my-outpost owned by account 123456789012 in Region us-west-2, use the URL encoding of arn:aws:s3-outposts:us-west-2:123456789012:outpost/my-outpost/object/reports/january.pdf. The value must be URL-encoded.

To copy a specific version of an object, append ?versionId= to the value (for example, awsexamplebucket/reports/january.pdf?versionId=QUpfdndhfd8438MNFDN93jdnJFkdmqnh893). If you don't specify a version ID, Amazon S3 copies the latest version of the source object.

Optional CopySourceIfMatch

CopySourceIfMatch: undefined | string

Copies the object if its entity tag (ETag) matches the specified tag.

Optional CopySourceIfModifiedSince

CopySourceIfModifiedSince: Date

Copies the object if it has been modified since the specified time.

Optional CopySourceIfNoneMatch

CopySourceIfNoneMatch: undefined | string

Copies the object if its entity tag (ETag) is different than the specified ETag.

Optional CopySourceIfUnmodifiedSince

CopySourceIfUnmodifiedSince: Date

Copies the object if it hasn't been modified since the specified time.

Optional CopySourceSSECustomerAlgorithm

CopySourceSSECustomerAlgorithm: undefined | string

Specifies the algorithm to use when decrypting the source object (for example, AES256).

Optional CopySourceSSECustomerKey

CopySourceSSECustomerKey: undefined | string

Specifies the customer-provided encryption key for Amazon S3 to use to decrypt the source object. The encryption key provided in this header must be one that was used when the source object was created.

Optional CopySourceSSECustomerKeyMD5

CopySourceSSECustomerKeyMD5: undefined | string

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

Optional ExpectedBucketOwner

ExpectedBucketOwner: undefined | string

The account ID of the expected destination bucket owner. If the destination bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

Optional ExpectedSourceBucketOwner

ExpectedSourceBucketOwner: undefined | string

The account ID of the expected source bucket owner. If the source bucket is owned by a different account, the request fails with the HTTP status code 403 Forbidden (access denied).

Optional Expires

Expires: Date

The date and time at which the object is no longer cacheable.

Optional GrantFullControl

GrantFullControl: undefined | string

Gives the grantee READ, READ_ACP, and WRITE_ACP permissions on the object.

This action is not supported by Amazon S3 on Outposts.

Optional GrantRead

GrantRead: undefined | string

Allows grantee to read the object data and its metadata.

This action is not supported by Amazon S3 on Outposts.

Optional GrantReadACP

GrantReadACP: undefined | string

Allows grantee to read the object ACL.

This action is not supported by Amazon S3 on Outposts.

Optional GrantWriteACP

GrantWriteACP: undefined | string

Allows grantee to write the ACL for the applicable object.

This action is not supported by Amazon S3 on Outposts.

Key

Key: string | undefined

The key of the destination object.

Optional Metadata

Metadata: Record<string, string>

A map of metadata to store with the object in S3.

Optional MetadataDirective

MetadataDirective: MetadataDirective | string

Specifies whether the metadata is copied from the source object or replaced with metadata provided in the request.

Optional ObjectLockLegalHoldStatus

ObjectLockLegalHoldStatus: ObjectLockLegalHoldStatus | string

Specifies whether you want to apply a legal hold to the copied object.

Optional ObjectLockMode

ObjectLockMode: ObjectLockMode | string

The Object Lock mode that you want to apply to the copied object.

Optional ObjectLockRetainUntilDate

ObjectLockRetainUntilDate: Date

The date and time when you want the copied object's Object Lock to expire.

Optional RequestPayer

RequestPayer: RequestPayer | string

Confirms that the requester knows that they will be charged for the request. Bucket owners need not specify this parameter in their requests. For information about downloading objects from Requester Pays buckets, see Downloading Objects in Requester Pays Buckets in the Amazon S3 User Guide.

Optional SSECustomerAlgorithm

SSECustomerAlgorithm: undefined | string

Specifies the algorithm to use to when encrypting the object (for example, AES256).

Optional SSECustomerKey

SSECustomerKey: undefined | string

Specifies the customer-provided encryption key for Amazon S3 to use in encrypting data. This value is used to store the object and then it is discarded; Amazon S3 does not store the encryption key. The key must be appropriate for use with the algorithm specified in the x-amz-server-side-encryption-customer-algorithm header.

Optional SSECustomerKeyMD5

SSECustomerKeyMD5: undefined | string

Specifies the 128-bit MD5 digest of the encryption key according to RFC 1321. Amazon S3 uses this header for a message integrity check to ensure that the encryption key was transmitted without error.

Optional SSEKMSEncryptionContext

SSEKMSEncryptionContext: undefined | string

Specifies the Amazon Web Services KMS Encryption Context to use for object encryption. The value of this header is a base64-encoded UTF-8 string holding JSON with the encryption context key-value pairs.

Optional SSEKMSKeyId

SSEKMSKeyId: undefined | string

Specifies the Amazon Web Services KMS key ID to use for object encryption. All GET and PUT requests for an object protected by Amazon Web Services KMS will fail if not made via SSL or using SigV4. For information about configuring using any of the officially supported Amazon Web Services SDKs and Amazon Web Services CLI, see Specifying the Signature Version in Request Authentication in the Amazon S3 User Guide.

Optional ServerSideEncryption

ServerSideEncryption: ServerSideEncryption | string

The server-side encryption algorithm used when storing this object in Amazon S3 (for example, AES256, aws:kms).

Optional StorageClass

StorageClass: StorageClass | string

By default, Amazon S3 uses the STANDARD Storage Class to store newly created objects. The STANDARD storage class provides high durability and high availability. Depending on performance needs, you can specify a different Storage Class. Amazon S3 on Outposts only uses the OUTPOSTS Storage Class. For more information, see Storage Classes in the Amazon S3 User Guide.

Optional Tagging

Tagging: undefined | string

The tag-set for the object destination object this value must be used in conjunction with the TaggingDirective. The tag-set must be encoded as URL Query parameters.

Optional TaggingDirective

TaggingDirective: TaggingDirective | string

Specifies whether the object tag-set are copied from the source object or replaced with tag-set provided in the request.

Optional WebsiteRedirectLocation

WebsiteRedirectLocation: undefined | string

If the bucket is configured as a website, redirects requests for this object to another object in the same bucket or to an external URL. Amazon S3 stores the value of this header in the object metadata.