Using Amazon ECR with the AWS CLI

The following steps walk you through the steps needed to push a container image to a private Amazon ECR repository for the first time using the Docker CLI and the AWS CLI.

For more information on the other tools available for managing your AWS resources, including the different AWS SDKs, IDE toolkits, and the Windows PowerShell command line tools, see http://aws.amazon.com/tools/.

Prerequisites

Before you begin, be sure that you have completed the steps in Setting up with Amazon ECR.

If you do not already have the latest AWS CLI and Docker installed and ready to use, use the following steps to install both of these tools.

Install the AWS CLI

You can use the AWS command line tools to issue commands at your command line to perform Amazon ECR and other AWS tasks. This can be faster and more convenient than using the console. The command line tools are also useful for building scripts that perform AWS tasks.

To use the AWS CLI with Amazon ECR, install the latest AWS CLI version. For information, see Installing the AWS Command Line Interface in the AWS Command Line Interface User Guide.

Install Docker

Docker is available on many different operating systems, including most modern Linux distributions, like Ubuntu, and even macOS and Windows. For more information about how to install Docker on your particular operating system, go to the Docker installation guide.

You do not need a local development system to use Docker. If you are using Amazon EC2 already, you can launch an Amazon Linux 2023 instance and install Docker to get started.

If you already have Docker installed, skip to Step 1: Create a Docker image.

To install Docker on an Amazon EC2 instance using an Amazon Linux 2023 AMI

1. Launch an instance with the latest Amazon Linux 2023 AMI. For more information, see Launching an instance in the Amazon EC2 User Guide for Linux Instances.

2. Connect to your instance. For more information, see Connect to Your Linux Instance in the Amazon EC2 User Guide for Linux Instances.

3. Update the installed packages and package cache on your instance.

   sudo yum update -y

4. Install the most recent Docker Community Edition package.

   sudo yum install docker

5. Start the Docker service.

   sudo service docker start

6. Add the ec2-user to the docker group so you can execute Docker commands without using sudo.

   sudo usermod -a -G docker ec2-user

7. Log out and log back in again to pick up the new docker group permissions. You can accomplish this by closing your current SSH terminal window and reconnecting to your instance in a new one. Your new SSH session will have the appropriate docker group permissions.

8. Verify that the ec2-user can run Docker commands without sudo.

   docker info

   Note

   In some cases, you may need to reboot your instance to provide permissions for the ec2-user to access the Docker daemon. Try rebooting your instance if you see the following error:

   Cannot connect to the Docker daemon. Is the docker daemon running on this host?

Step 1: Create a Docker image

In this step, you create a Docker image of a simple web application, and test it on your local system or Amazon EC2 instance.

To create a Docker image of a simple web application

1. Create a file called Dockerfile. A Dockerfile is a manifest that describes the base image to use for your Docker image and what you want installed and running on it. For more information about Dockerfiles, go to the Dockerfile Reference.

   touch Dockerfile

2. Edit the Dockerfile you just created and add the following content.

   FROM public.ecr.aws/amazonlinux/amazonlinux:latest
   
   # Install dependencies
   RUN yum update -y && \
    yum install -y httpd
   
   # Install apache and write hello world message
   RUN echo 'Hello World!' > /var/www/html/index.html
   
   # Configure apache
   RUN echo 'mkdir -p /var/run/httpd' >> /root/run_apache.sh && \
    echo 'mkdir -p /var/lock/httpd' >> /root/run_apache.sh && \
    echo '/usr/sbin/httpd -D FOREGROUND' >> /root/run_apache.sh && \
    chmod 755 /root/run_apache.sh
   
   EXPOSE 80
   
   CMD /root/run_apache.sh

   This Dockerfile uses the public Amazon Linux 2 image hosted on Amazon ECR Public. The RUN instructions update the package caches, installs some software packages for the web server, and then write the "Hello World!" content to the web servers document root. The EXPOSE instruction exposes port 80 on the container, and the CMD instruction starts the web server.

3. Build the Docker image from your Dockerfile.

   Note

   Some versions of Docker may require the full path to your Dockerfile in the following command, instead of the relative path shown below.

   docker build -t hello-world .

4. List your container image.

   docker images --filter reference=hello-world

   Output:

   REPOSITORY          TAG                 IMAGE ID            CREATED             SIZE
   hello-world         latest              e9ffedc8c286        4 minutes ago       194MB

5. Run the newly built image. The -p 80:80 option maps the exposed port 80 on the container to port 80 on the host system. For more information about docker run, go to the Docker run reference.

   docker run -t -i -p 80:80 hello-world

   Note

   Output from the Apache web server is displayed in the terminal window. You can ignore the "Could not reliably determine the fully qualified domain name" message.

6. Open a browser and point to the server that is running Docker and hosting your container.

   • If you are using an EC2 instance, this is the Public DNS value for the server, which is the same address you use to connect to the instance with SSH. Make sure that the security group for your instance allows inbound traffic on port 80.

   • If you are running Docker locally, point your browser to http://localhost/.

   • If you are using docker-machine on a Windows or Mac computer, find the IP address of the VirtualBox VM that is hosting Docker with the docker-machine ip command, substituting machine-name with the name of the docker machine you are using.

     docker-machine ip machine-name

   You should see a web page with your "Hello World!" statement.

7. Stop the Docker container by typing Ctrl + c.

Step 2: Authenticate to your default registry

After you have installed and configured the AWS CLI, authenticate the Docker CLI to your default registry. That way, the docker command can push and pull images with Amazon ECR. The AWS CLI provides a get-login-password command to simplify the authentication process.

To authenticate Docker to an Amazon ECR registry with get-login-password, run the aws ecr get-login-password command. When passing the authentication token to the docker login command, use the value AWS for the username and specify the Amazon ECR registry URI you want to authenticate to. If authenticating to multiple registries, you must repeat the command for each registry.

Important

If you receive an error, install or upgrade to the latest version of the AWS CLI. For more information, see Installing the AWS Command Line Interface in the AWS Command Line Interface User Guide.

• get-login-password (AWS CLI)

  aws ecr get-login-password --region region | docker login --username AWS --password-stdin aws_account_id.dkr.ecr.region.amazonaws.com

• Get-ECRLoginCommand (AWS Tools for Windows PowerShell)

  (Get-ECRLoginCommand).Password | docker login --username AWS --password-stdin aws_account_id.dkr.ecr.region.amazonaws.com

Step 3: Create a repository

Now that you have an image to push to Amazon ECR, you must create a repository to hold it. In this example, you create a repository called hello-repository to which you later push the hello-world:latest image. To create a repository, run the following command:

aws ecr create-repository \
    --repository-name hello-repository \
    --region region

Step 4: Push an image to Amazon ECR

Now you can push your image to the Amazon ECR repository you created in the previous section. You use the docker CLI to push images, but there are a few prerequisites that must be satisfied for this to work properly:

• The minimum version of docker is installed: 1.7

• The Amazon ECR authorization token has been configured with docker login.

• The Amazon ECR repository exists and the user has access to push to the repository.

After those prerequisites are met, you can push your image to your newly created repository in the default registry for your account.

To tag and push an image to Amazon ECR

1. List the images you have stored locally to identify the image to tag and push.

   docker images

   Output:

   REPOSITORY          TAG                 IMAGE ID            CREATED             VIRTUAL SIZE
   hello-world         latest              e9ffedc8c286        4 minutes ago       241MB

2. Tag the image to push to your repository.

   docker tag hello-world:latest aws_account_id.dkr.ecr.region.amazonaws.com/hello-repository

3. Push the image.

   docker push aws_account_id.dkr.ecr.region.amazonaws.com/hello-repository

   Output:

   The push refers to a repository [aws_account_id.dkr.ecr.region.amazonaws.com/hello-repository] (len: 1)
   e9ae3c220b23: Pushed
   a6785352b25c: Pushed
   0998bf8fb9e9: Pushed
   0a85502c06c9: Pushed
   latest: digest: sha256:215d7e4121b30157d8839e81c4e0912606fca105775bb0636EXAMPLE size: 6774

Step 5: Pull an image from Amazon ECR

After your image has been pushed to your Amazon ECR repository, you can pull it from other locations. Use the docker CLI to pull images, but there are a few prerequisites that must be satisfied for this to work properly:

• The minimum version of docker is installed: 1.7

• The Amazon ECR authorization token has been configured with docker login.

• The Amazon ECR repository exists and the user has access to pull from the repository.

After those prerequisites are met, you can pull your image. To pull your example image from Amazon ECR, run the following command:

docker pull aws_account_id.dkr.ecr.region.amazonaws.com/hello-repository:latest

Output:

latest: Pulling from hello-repository
0a85502c06c9: Pull complete
0998bf8fb9e9: Pull complete
a6785352b25c: Pull complete
e9ae3c220b23: Pull complete
Digest: sha256:215d7e4121b30157d8839e81c4e0912606fca105775bb0636EXAMPLE
Status: Downloaded newer image for aws_account_id.dkr.region.amazonaws.com/hello-repository:latest

Step 6: Delete an image

If you decide that you no longer need or want an image in one of your repositories, you can delete it with the batch-delete-image command. To delete an image, you must specify the repository that it is in and either a imageTag or imageDigest value for the image. The example below deletes an image in the hello-repository repository with the image tag latest.

aws ecr batch-delete-image \
      --repository-name hello-repository \
      --image-ids imageTag=latest \
      --region region

Step 7: Delete a repository

If you decide that you no longer need or want an entire repository of images, you can delete the repository. By default, you cannot delete a repository that contains images; however, the --force flag allows this. To delete a repository that contains images (and all the images within it), run the following command.

aws ecr delete-repository \
      --repository-name hello-repository \
      --force \
      --region region