Package software.amazon.awscdk.services.ssm

Class CfnAssociationProps.Builder

java.lang.Object
software.amazon.awscdk.services.ssm.CfnAssociationProps.Builder
All Implemented Interfaces:
software.amazon.jsii.Builder<CfnAssociationProps>
Enclosing interface:
CfnAssociationProps
@Stability(Stable) public static final class CfnAssociationProps.Builder extends Object implements software.amazon.jsii.Builder<CfnAssociationProps>
A builder for CfnAssociationProps

  • Constructor Details

    • Builder

      public Builder()

  • Method Details

    • name

      @Stability(Stable) public CfnAssociationProps.Builder name(String name)
      Sets the value of CfnAssociationProps.getName()
      Parameters:
      name - The name of the SSM document that contains the configuration information for the instance. This parameter is required. You can specify Command or Automation documents. The documents can be AWS -predefined documents, documents you created, or a document that is shared with you from another account. For SSM documents that are shared with you from other AWS accounts , you must specify the complete SSM document ARN, in the following format:

      arn:partition:ssm:region:account-id:document/document-name

      For example: arn:aws:ssm:us-east-2:12345678912:document/My-Shared-Document

      For AWS -predefined documents and SSM documents you created in your account, you only need to specify the document name. For example, AWS -ApplyPatchBaseline or My-Document .

      Returns:
      this

    • applyOnlyAtCronInterval

      @Stability(Stable) public CfnAssociationProps.Builder applyOnlyAtCronInterval(Boolean applyOnlyAtCronInterval)
      Sets the value of CfnAssociationProps.getApplyOnlyAtCronInterval()
      Parameters:
      applyOnlyAtCronInterval - By default, when you create a new association, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter is not supported for rate expressions.
      Returns:
      this

    • applyOnlyAtCronInterval

      @Stability(Stable) public CfnAssociationProps.Builder applyOnlyAtCronInterval(IResolvable applyOnlyAtCronInterval)
      Sets the value of CfnAssociationProps.getApplyOnlyAtCronInterval()
      Parameters:
      applyOnlyAtCronInterval - By default, when you create a new association, the system runs it immediately after it is created and then according to the schedule you specified. Specify this option if you don't want an association to run immediately after you create it. This parameter is not supported for rate expressions.
      Returns:
      this

    • associationName

      @Stability(Stable) public CfnAssociationProps.Builder associationName(String associationName)
      Sets the value of CfnAssociationProps.getAssociationName()
      Parameters:
      associationName - Specify a descriptive name for the association.
      Returns:
      this

    • automationTargetParameterName

      @Stability(Stable) public CfnAssociationProps.Builder automationTargetParameterName(String automationTargetParameterName)
      Sets the value of CfnAssociationProps.getAutomationTargetParameterName()
      Parameters:
      automationTargetParameterName - Choose the parameter that will define how your automation will branch out. This target is required for associations that use an Automation runbook and target resources by using rate controls. Automation is a capability of AWS Systems Manager .
      Returns:
      this

    • calendarNames

      @Stability(Stable) public CfnAssociationProps.Builder calendarNames(List<String> calendarNames)
      Sets the value of CfnAssociationProps.getCalendarNames()
      Parameters:
      calendarNames - The names or Amazon Resource Names (ARNs) of the Change Calendar type documents your associations are gated under. The associations only run when that Change Calendar is open. For more information, see AWS Systems Manager Change Calendar .
      Returns:
      this

    • complianceSeverity

      @Stability(Stable) public CfnAssociationProps.Builder complianceSeverity(String complianceSeverity)
      Sets the value of CfnAssociationProps.getComplianceSeverity()
      Parameters:
      complianceSeverity - The severity level that is assigned to the association.
      Returns:
      this

    • documentVersion

      @Stability(Stable) public CfnAssociationProps.Builder documentVersion(String documentVersion)
      Sets the value of CfnAssociationProps.getDocumentVersion()
      Parameters:
      documentVersion - The version of the SSM document to associate with the target.

      Note the following important information.

      • State Manager doesn't support running associations that use a new version of a document if that document is shared from another account. State Manager always runs the default version of a document if shared from another account, even though the Systems Manager console shows that a new version was processed. If you want to run an association using a new version of a document shared form another account, you must set the document version to default .
      • DocumentVersion is not valid for documents owned by AWS , such as AWS-RunPatchBaseline or AWS-UpdateSSMAgent . If you specify DocumentVersion for an AWS document, the system returns the following error: "Error occurred during operation 'CreateAssociation'." (RequestToken: , HandlerErrorCode: GeneralServiceException).

      Returns:
      this

    • instanceId

      @Stability(Stable) public CfnAssociationProps.Builder instanceId(String instanceId)
      Sets the value of CfnAssociationProps.getInstanceId()
      Parameters:
      instanceId - The ID of the instance that the SSM document is associated with. You must specify the InstanceId or Targets property.

      InstanceId has been deprecated. To specify an instance ID for an association, use the Targets parameter. If you use the parameter InstanceId , you cannot use the parameters AssociationName , DocumentVersion , MaxErrors , MaxConcurrency , OutputLocation , or ScheduleExpression . To use these parameters, you must use the Targets parameter.

      Returns:
      this

    • maxConcurrency

      @Stability(Stable) public CfnAssociationProps.Builder maxConcurrency(String maxConcurrency)
      Sets the value of CfnAssociationProps.getMaxConcurrency()
      Parameters:
      maxConcurrency - The maximum number of targets allowed to run the association at the same time. You can specify a number, for example 10, or a percentage of the target set, for example 10%. The default value is 100%, which means all targets run the association at the same time.

      If a new managed node starts and attempts to run an association while Systems Manager is running MaxConcurrency associations, the association is allowed to run. During the next association interval, the new managed node will process its association within the limit specified for MaxConcurrency .

      Returns:
      this

    • maxErrors

      @Stability(Stable) public CfnAssociationProps.Builder maxErrors(String maxErrors)
      Sets the value of CfnAssociationProps.getMaxErrors()
      Parameters:
      maxErrors - The number of errors that are allowed before the system stops sending requests to run the association on additional targets. You can specify either an absolute number of errors, for example 10, or a percentage of the target set, for example 10%. If you specify 3, for example, the system stops sending requests when the fourth error is received. If you specify 0, then the system stops sending requests after the first error is returned. If you run an association on 50 managed nodes and set MaxError to 10%, then the system stops sending the request when the sixth error is received.

      Executions that are already running an association when MaxErrors is reached are allowed to complete, but some of these executions may fail as well. If you need to ensure that there won't be more than max-errors failed executions, set MaxConcurrency to 1 so that executions proceed one at a time.

      Returns:
      this

    • outputLocation

      @Stability(Stable) public CfnAssociationProps.Builder outputLocation(IResolvable outputLocation)
      Sets the value of CfnAssociationProps.getOutputLocation()
      Parameters:
      outputLocation - An Amazon Simple Storage Service (Amazon S3) bucket where you want to store the output details of the request.
      Returns:
      this

    • outputLocation

      @Stability(Stable) public CfnAssociationProps.Builder outputLocation(CfnAssociation.InstanceAssociationOutputLocationProperty outputLocation)
      Sets the value of CfnAssociationProps.getOutputLocation()
      Parameters:
      outputLocation - An Amazon Simple Storage Service (Amazon S3) bucket where you want to store the output details of the request.
      Returns:
      this

    • parameters

      @Stability(Stable) public CfnAssociationProps.Builder parameters(Object parameters)
      Sets the value of CfnAssociationProps.getParameters()
      Parameters:
      parameters - The parameters for the runtime configuration of the document.
      Returns:
      this

    • scheduleExpression

      @Stability(Stable) public CfnAssociationProps.Builder scheduleExpression(String scheduleExpression)
      Sets the value of CfnAssociationProps.getScheduleExpression()
      Parameters:
      scheduleExpression - A cron expression that specifies a schedule when the association runs. The schedule runs in Coordinated Universal Time (UTC).
      Returns:
      this

    • scheduleOffset

      @Stability(Stable) public CfnAssociationProps.Builder scheduleOffset(Number scheduleOffset)
      Sets the value of CfnAssociationProps.getScheduleOffset()
      Parameters:
      scheduleOffset - Number of days to wait after the scheduled day to run an association.
      Returns:
      this

    • syncCompliance

      @Stability(Stable) public CfnAssociationProps.Builder syncCompliance(String syncCompliance)
      Sets the value of CfnAssociationProps.getSyncCompliance()
      Parameters:
      syncCompliance - The mode for generating association compliance. You can specify AUTO or MANUAL . In AUTO mode, the system uses the status of the association execution to determine the compliance status. If the association execution runs successfully, then the association is COMPLIANT . If the association execution doesn't run successfully, the association is NON-COMPLIANT .

      In MANUAL mode, you must specify the AssociationId as a parameter for the PutComplianceItems API action. In this case, compliance data is not managed by State Manager. It is managed by your direct call to the PutComplianceItems API action.

      By default, all associations use AUTO mode.

      Returns:
      this

    • targets

      @Stability(Stable) public CfnAssociationProps.Builder targets(IResolvable targets)
      Sets the value of CfnAssociationProps.getTargets()
      Parameters:
      targets - The targets for the association. You must specify the InstanceId or Targets property. You can target all instances in an AWS account by specifying t he InstanceIds key with a value of * .

      Supported formats include the following.

      • Key=InstanceIds,Values=<instance-id-1>,<instance-id-2>,<instance-id-3>
      • Key=tag-key,Values=<my-tag-key-1>,<my-tag-key-2>

      To view a JSON and a YAML example that targets all instances, see "Create an association for all managed instances in an AWS account " on the Examples page.

      Returns:
      this

    • targets

      @Stability(Stable) public CfnAssociationProps.Builder targets(List<? extends Object> targets)
      Sets the value of CfnAssociationProps.getTargets()
      Parameters:
      targets - The targets for the association. You must specify the InstanceId or Targets property. You can target all instances in an AWS account by specifying t he InstanceIds key with a value of * .

      Supported formats include the following.

      • Key=InstanceIds,Values=<instance-id-1>,<instance-id-2>,<instance-id-3>
      • Key=tag-key,Values=<my-tag-key-1>,<my-tag-key-2>

      To view a JSON and a YAML example that targets all instances, see "Create an association for all managed instances in an AWS account " on the Examples page.

      Returns:
      this

    • waitForSuccessTimeoutSeconds

      @Stability(Stable) public CfnAssociationProps.Builder waitForSuccessTimeoutSeconds(Number waitForSuccessTimeoutSeconds)
      Sets the value of CfnAssociationProps.getWaitForSuccessTimeoutSeconds()
      Parameters:
      waitForSuccessTimeoutSeconds - The number of seconds the service should wait for the association status to show "Success" before proceeding with the stack execution. If the association status doesn't show "Success" after the specified number of seconds, then stack creation fails.

      When you specify a value for the WaitForSuccessTimeoutSeconds , drift detection for your AWS CloudFormation stack’s configuration might yield inaccurate results. If drift detection is important in your scenario, we recommend that you don’t include WaitForSuccessTimeoutSeconds in your template.

      Returns:
      this

    • build

      @Stability(Stable) public CfnAssociationProps build()
      Builds the configured instance.
      Specified by:
      build in interface software.amazon.jsii.Builder<CfnAssociationProps>
      Returns:
      a new instance of CfnAssociationProps
      Throws:
      NullPointerException - if any required attribute was not provided