TableBase

class aws_cdk.aws_dynamodb.TableBase(scope, id, *, account=None, environment_from_arn=None, physical_name=None, region=None)

Bases: Resource

Parameters:

scope (Construct) –
id (str) –
account (Optional[str]) – The AWS account ID this resource belongs to. Default: - the resource is in the same account as the stack it belongs to
environment_from_arn (Optional[str]) – ARN to deduce region and account from. The ARN is parsed and the account and region are taken from the ARN. This should be used for imported resources. Cannot be supplied together with either account or region. Default: - take environment from account, region parameters, or use Stack environment.
physical_name (Optional[str]) – The value passed in by users to the physical name prop of the resource. - undefined implies that a physical name will be allocated by CloudFormation during deployment. - a concrete value implies a specific physical name - PhysicalName.GENERATE_IF_NEEDED is a marker that indicates that a physical will only be generated by the CDK if it is needed for cross-environment references. Otherwise, it will be allocated by CloudFormation. Default: - The physical name will be allocated by CloudFormation at deployment time
region (Optional[str]) – The AWS region this resource belongs to. Default: - the resource is in the same region as the stack it belongs to

Methods

apply_removal_policy(policy)

Apply the given removal policy to this resource.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

Parameters:

policy (RemovalPolicy) –

Return type:

None

grant(grantee, *actions)

Adds an IAM policy statement associated with this table to an IAM principal’s policy.

If encryptionKey is present, appropriate grants to the key needs to be added separately using the table.encryptionKey.grant* methods.

Parameters:

grantee (IGrantable) – The principal (no-op if undefined).
actions (str) – The set of actions to allow (i.e. “dynamodb:PutItem”, “dynamodb:GetItem”, …).

Return type:

Grant

grant_full_access(grantee)

Permits all DynamoDB operations (“dynamodb:*”) to an IAM principal.

Appropriate grants will also be added to the customer-managed KMS key if one was configured.

Parameters:: grantee (IGrantable) – The principal to grant access to.
Return type:: Grant

grant_read_data(grantee)

Permits an IAM principal all data read operations from this table: BatchGetItem, GetRecords, GetShardIterator, Query, GetItem, Scan, DescribeTable.

Appropriate grants will also be added to the customer-managed KMS key if one was configured.

Parameters:: grantee (IGrantable) – The principal to grant access to.
Return type:: Grant

grant_read_write_data(grantee)

Permits an IAM principal to all data read/write operations to this table.

BatchGetItem, GetRecords, GetShardIterator, Query, GetItem, Scan, BatchWriteItem, PutItem, UpdateItem, DeleteItem, DescribeTable

Appropriate grants will also be added to the customer-managed KMS key if one was configured.

Parameters:: grantee (IGrantable) – The principal to grant access to.
Return type:: Grant

grant_stream(grantee, *actions)

Adds an IAM policy statement associated with this table’s stream to an IAM principal’s policy.

If encryptionKey is present, appropriate grants to the key needs to be added separately using the table.encryptionKey.grant* methods.

Parameters:

grantee (IGrantable) – The principal (no-op if undefined).
actions (str) – The set of actions to allow (i.e. “dynamodb:DescribeStream”, “dynamodb:GetRecords”, …).

Return type:

Grant

grant_stream_read(grantee)

Permits an IAM principal all stream data read operations for this table’s stream: DescribeStream, GetRecords, GetShardIterator, ListStreams.

Appropriate grants will also be added to the customer-managed KMS key if one was configured.

Parameters:: grantee (IGrantable) – The principal to grant access to.
Return type:: Grant

grant_table_list_streams(grantee)

Permits an IAM Principal to list streams attached to current dynamodb table.

Parameters:: grantee (IGrantable) – The principal (no-op if undefined).
Return type:: Grant

grant_write_data(grantee)

Permits an IAM principal all data write operations to this table: BatchWriteItem, PutItem, UpdateItem, DeleteItem, DescribeTable.

Appropriate grants will also be added to the customer-managed KMS key if one was configured.

Parameters:: grantee (IGrantable) – The principal to grant access to.
Return type:: Grant

metric(metric_name, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Return the given named metric for this Table.

By default, the metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the statistic and period properties.

Parameters:

metric_name (str) –
account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) – Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_conditional_check_failed_requests(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for the conditional check failed requests this table.

By default, the metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the statistic and period properties.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_consumed_read_capacity_units(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for the consumed read capacity units this table.

By default, the metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the statistic and period properties.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_consumed_write_capacity_units(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for the consumed write capacity units this table.

By default, the metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the statistic and period properties.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_successful_request_latency(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for the successful request latency this table.

By default, the metric will be calculated as an average over a period of 5 minutes. You can customize this by using the statistic and period properties.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_system_errors(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) Metric for the system errors this table.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Deprecated:

use metricSystemErrorsForOperations.

Stability:

deprecated

Return type:

Metric

metric_system_errors_for_operations(*, operations=None, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for the system errors this table.

This will sum errors across all possible operations. Note that by default, each individual metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the statistic and period properties.

Parameters:

operations (Optional[Sequence[Operation]]) – The operations to apply the metric to. Default: - All operations available by DynamoDB tables will be considered.
account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

IMetric

metric_throttled_requests(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

(deprecated) How many requests are throttled on this table.

Default: sum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Deprecated:

Do not use this function. It returns an invalid metric. Use metricThrottledRequestsForOperation instead.

Stability:

deprecated

Return type:

Metric

metric_throttled_requests_for_operation(operation, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

How many requests are throttled on this table, for the given operation.

Default: sum over 5 minutes

Parameters:

operation (str) –
account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_throttled_requests_for_operations(*, operations=None, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

How many requests are throttled on this table.

This will sum errors across all possible operations. Note that by default, each individual metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the statistic and period properties.

Parameters:

operations (Optional[Sequence[Operation]]) – The operations to apply the metric to. Default: - All operations available by DynamoDB tables will be considered.
account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

IMetric

metric_user_errors(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Metric for the user errors.

Note that this metric reports user errors across all the tables in the account and region the table resides in.

By default, the metric will be calculated as a sum over a period of 5 minutes. You can customize this by using the statistic and period properties.

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

to_string()

Returns a string representation of this construct.

Return type:: str

Attributes

encryption_key: KMS encryption key, if this table uses a customer-managed encryption key.

env

The environment this resource belongs to.

For resources that are created and managed by the CDK (generally, those created by creating new class instances like Role, Bucket, etc.), this is always the same as the environment of the stack they belong to; however, for imported resources (those obtained from static methods like fromRoleArn, fromBucketName, etc.), that might be different than the stack they were imported into.

node: The tree node.

stack: The stack in which this resource is defined.

table_arn

Arn of the dynamodb table.

Attribute:: true

table_name

Table name of the dynamodb table.

Attribute:: true

table_stream_arn

ARN of the table’s stream, if there is one.

Attribute:: true

Static Methods

classmethod is_construct(x)

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters:: x (Any) – Any object.
Return type:: bool
Returns:: true if x is an object created from a class which extends Construct.

classmethod is_owned_resource(construct)

Returns true if the construct was created by CDK, and false otherwise.

Parameters:

construct (IConstruct) –

Return type:

bool

classmethod is_resource(construct)

Check whether the given construct is a Resource.

Parameters:

construct (IConstruct) –

Return type:

bool