QueueBase

class aws_cdk.aws_sqs.QueueBase(scope, id, *, account=None, environment_from_arn=None, physical_name=None, region=None)

Bases: Resource

Reference to a new or existing Amazon SQS queue.

Parameters:

scope (Construct) –
id (str) –
account (Optional[str]) – The AWS account ID this resource belongs to. Default: - the resource is in the same account as the stack it belongs to
environment_from_arn (Optional[str]) – ARN to deduce region and account from. The ARN is parsed and the account and region are taken from the ARN. This should be used for imported resources. Cannot be supplied together with either account or region. Default: - take environment from account, region parameters, or use Stack environment.
physical_name (Optional[str]) – The value passed in by users to the physical name prop of the resource. - undefined implies that a physical name will be allocated by CloudFormation during deployment. - a concrete value implies a specific physical name - PhysicalName.GENERATE_IF_NEEDED is a marker that indicates that a physical will only be generated by the CDK if it is needed for cross-environment references. Otherwise, it will be allocated by CloudFormation. Default: - The physical name will be allocated by CloudFormation at deployment time
region (Optional[str]) – The AWS region this resource belongs to. Default: - the resource is in the same region as the stack it belongs to

Methods

add_to_resource_policy(statement)

Adds a statement to the IAM resource policy associated with this queue.

If this queue was created in this stack (new Queue), a queue policy will be automatically created upon the first call to addToPolicy. If the queue is imported (Queue.import), then this is a no-op.

Parameters:

statement (PolicyStatement) –

Return type:

AddToResourcePolicyResult

apply_removal_policy(policy)

Apply the given removal policy to this resource.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

Parameters:

policy (RemovalPolicy) –

Return type:

None

grant(grantee, *actions)

Grant the actions defined in queueActions to the identity Principal given on this SQS queue resource.

Parameters:

grantee (IGrantable) – Principal to grant right to.
actions (str) – The actions to grant.

Return type:

Grant

grant_consume_messages(grantee)

Grant permissions to consume messages from a queue.

This will grant the following permissions:

sqs:ChangeMessageVisibility
sqs:DeleteMessage
sqs:ReceiveMessage
sqs:GetQueueAttributes
sqs:GetQueueUrl

If encryption is used, permission to use the key to decrypt the contents of the queue will also be granted to the same principal.

This will grant the following KMS permissions:

kms:Decrypt

Parameters:: grantee (IGrantable) – Principal to grant consume rights to.
Return type:: Grant

grant_purge(grantee)

Grant an IAM principal permissions to purge all messages from the queue.

This will grant the following permissions:

sqs:PurgeQueue
sqs:GetQueueAttributes
sqs:GetQueueUrl

Parameters:: grantee (IGrantable) – Principal to grant send rights to.
Return type:: Grant

grant_send_messages(grantee)

Grant access to send messages to a queue to the given identity.

This will grant the following permissions:

sqs:SendMessage
sqs:GetQueueAttributes
sqs:GetQueueUrl

If encryption is used, permission to use the key to encrypt/decrypt the contents of the queue will also be granted to the same principal.

This will grant the following KMS permissions:

kms:Decrypt
kms:Encrypt
kms:ReEncrypt*
kms:GenerateDataKey*

Parameters:: grantee (IGrantable) – Principal to grant send rights to.
Return type:: Grant

metric(metric_name, *, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

Return the given named metric for this Queue.

Parameters:

metric_name (str) –
account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) – Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_approximate_age_of_oldest_message(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The approximate age of the oldest non-deleted message in the queue.

Maximum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_approximate_number_of_messages_delayed(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of messages in the queue that are delayed and not available for reading immediately.

Maximum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_approximate_number_of_messages_not_visible(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of messages that are in flight.

Maximum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_approximate_number_of_messages_visible(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of messages available for retrieval from the queue.

Maximum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_number_of_empty_receives(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of ReceiveMessage API calls that did not return a message.

Sum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_number_of_messages_deleted(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of messages deleted from the queue.

Sum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_number_of_messages_received(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of messages returned by calls to the ReceiveMessage action.

Sum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_number_of_messages_sent(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The number of messages added to a queue.

Sum over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

metric_sent_message_size(*, account=None, color=None, dimensions_map=None, label=None, period=None, region=None, statistic=None, unit=None)

The size of messages added to a queue.

Average over 5 minutes

Parameters:

account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.
color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color
dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.
label (Optional[str]) –
Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label
period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)
region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.
statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average
unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Return type:

Metric

to_string()

Returns a string representation of this construct.

Return type:: str

Attributes

encryption_master_key: If this queue is server-side encrypted, this is the KMS encryption key.

encryption_type: Whether the contents of the queue are encrypted, and by what type of key.

env

The environment this resource belongs to.

For resources that are created and managed by the CDK (generally, those created by creating new class instances like Role, Bucket, etc.), this is always the same as the environment of the stack they belong to; however, for imported resources (those obtained from static methods like fromRoleArn, fromBucketName, etc.), that might be different than the stack they were imported into.

fifo

Whether this queue is an Amazon SQS FIFO queue.

If false, this is a standard queue.

node: The tree node.

queue_arn: The ARN of this queue.

queue_name: The name of this queue.

queue_url: The URL of this queue.

stack: The stack in which this resource is defined.

Static Methods

classmethod is_construct(x)

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters:: x (Any) – Any object.
Return type:: bool
Returns:: true if x is an object created from a class which extends Construct.

classmethod is_owned_resource(construct)

Returns true if the construct was created by CDK, and false otherwise.

Parameters:

construct (IConstruct) –

Return type:

bool

classmethod is_resource(construct)

Check whether the given construct is a Resource.

Parameters:

construct (IConstruct) –

Return type:

bool