# NetworkLoadBalancedEc2ServiceProps The properties for the NetworkLoadBalancedEc2Service service. Extends: NetworkLoadBalancedEc2ServiceProps Extends: NetworkLoadBalancedServiceBaseProps Used as props by: NetworkLoadBalancedEc2Service - Source: [`aws-ecs-patterns/lib/ecs/network-load-balanced-ecs-service.ts`](https://github.com/aws/aws-cdk/blob/v2.274.0/packages/aws-cdk-lib/aws-ecs-patterns/lib/ecs/network-load-balanced-ecs-service.ts#L13) - Type last changed: v2.19.0 · 1 Apr 2022 ## Example ```ts import { Certificate } from 'aws-cdk-lib/aws-certificatemanager'; declare const cluster: ecs.Cluster; const certificate = Certificate.fromCertificateArn(this, 'Cert', 'arn:aws:acm:us-east-1:123456:certificate/abcdefg'); const loadBalancedEcsService = new ecsPatterns.NetworkLoadBalancedEc2Service(this, 'Service', { cluster, memoryLimitMiB: 1024, // The default value of listenerPort is 443 if you pass in listenerCertificate // It is configured to port 4443 here listenerPort: 4443, listenerCertificate: certificate, taskImageOptions: { image: ecs.ContainerImage.fromRegistry('test'), // The default value of containerPort is 443 if you pass in listenerCertificate // It is configured to port 8443 here containerPort: 8443, environment: { TEST_ENVIRONMENT_VARIABLE1: "test environment variable 1 value", TEST_ENVIRONMENT_VARIABLE2: "test environment variable 2 value", }, }, desiredCount: 2, }); ``` ## Properties - `capacityProviderStrategies`: [CapacityProviderStrategy](/cdk/api/v2/docs/aws-cdk-lib.aws_ecs.CapacityProviderStrategy.html)[] = undefined — A list of Capacity Provider strategies used to place a service. - `circuitBreaker`: [DeploymentCircuitBreaker](/cdk/api/v2/docs/aws-cdk-lib.aws_ecs.DeploymentCircuitBreaker.html) = disabled — Whether to enable the deployment circuit breaker. If this property is defined, circuit breaker will be implicitly enabled. - `cloudMapOptions`: [CloudMapOptions](/cdk/api/v2/docs/aws-cdk-lib.aws_ecs.CloudMapOptions.html) — The options for configuring an Amazon ECS service to use service discovery. **Default:** AWS Cloud Map service discovery is not enabled. - `cluster`: [ICluster](/cdk/api/v2/docs/aws-cdk-lib.aws_ecs.ICluster.html) — The name of the cluster that hosts the service. **Default:** create a new cluster; if both cluster and vpc are omitted, a new VPC will be created for you. If a cluster is specified, the vpc construct should be omitted. Alternatively, you can omit both cluster and vpc. - `cpu`: number = none — The number of cpu units used by the task. Valid values, which determines your range of valid values for the memory parameter: 256 (.25 vCPU) - Available memory values: 0.5GB, 1GB, 2GB 512 (.5 vCPU) - Available memory values: 1GB, 2GB, 3GB, 4GB 1024 (1 vCPU) - Available memory values: 2GB, 3GB, 4GB, 5GB, 6GB, 7GB, 8GB 2048 (2 vCPU) - Available memory values: Between 4GB and 16GB in 1GB increments 4096 (4 vCPU) - Available memory values: Between 8GB and 30GB in 1GB increments This default is set in the underlying FargateTaskDefinition construct. - `deploymentController`: [DeploymentController](/cdk/api/v2/docs/aws-cdk-lib.aws_ecs.DeploymentController.html) — Specifies which deployment controller to use for the service. **Default:** Rolling update (ECS) For more information, see [Amazon ECS Deployment Types](https://docs.aws.amazon.com/AmazonECS/latest/developerguide/deployment-types.html) - `desiredCount`: number — The desired number of instantiations of the task definition to keep running on the service. **Default:** The default is 1 for all new services and uses the existing service's desired count when updating an existing service. The minimum value is 1 - `domainName`: string — The domain name for the service, e.g. "api.example.com.". **Default:** No domain name. - `domainZone`: [IHostedZone](/cdk/api/v2/docs/aws-cdk-lib.aws_route53.IHostedZone.html) — The Route53 hosted zone for the domain, e.g. "example.com.". **Default:** No Route53 hosted domain zone. - `enableECSManagedTags`: boolean = false — Specifies whether to enable Amazon ECS managed tags for the tasks within the service. For more information, see [Tagging Your Amazon ECS Resources](https://docs.aws.amazon.com/AmazonECS/latest/developerguide/ecs-using-tags.html) - `enableExecuteCommand`: boolean = false — Whether ECS Exec should be enabled. - `healthCheckGracePeriod`: [Duration](/cdk/api/v2/docs/aws-cdk-lib.Duration.html) — The period of time, in seconds, that the Amazon ECS service scheduler ignores unhealthy Elastic Load Balancing target health checks after a task has first started. **Default:** defaults to 60 seconds if at least one load balancer is in-use and it is not already set - `ipAddressType`: [IpAddressType](/cdk/api/v2/docs/aws-cdk-lib.aws_elasticloadbalancingv2.IpAddressType.html) = IpAddressType.IPV4 — The type of IP addresses to use. If you want to add a UDP or TCP_UDP listener to the load balancer, you must choose IPv4. - `listenerCertificate`: [IListenerCertificate](/cdk/api/v2/docs/aws-cdk-lib.aws_elasticloadbalancingv2.IListenerCertificate.html) = none — Listener certificate list of ACM cert ARNs. If you provide a certificate, the listener's protocol will be TLS. If not, the listener's protocol will be TCP. - `listenerPort`: number — Listener port of the network load balancer that will serve traffic to the service. **Default:** 80 or 443 with listenerCertificate provided - `loadBalancer`: [INetworkLoadBalancer](/cdk/api/v2/docs/aws-cdk-lib.aws_elasticloadbalancingv2.INetworkLoadBalancer.html) — The network load balancer that will serve traffic to the service. **Default:** a new load balancer will be created. If the load balancer has been imported, the vpc attribute must be specified in the call to fromNetworkLoadBalancerAttributes(). [disable-awslint:ref-via-interface] - `maxHealthyPercent`: number — The maximum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that can run in a service during a deployment. **Default:** 100 if daemon, otherwise 200 - `memoryLimitMiB`: number — The hard limit (in MiB) of memory to present to the container. **Default:** No memory limit. If your container attempts to exceed the allocated memory, the container is terminated. At least one of memoryLimitMiB and memoryReservationMiB is required. - `memoryReservationMiB`: number — The soft limit (in MiB) of memory to reserve for the container. **Default:** No memory reserved. When system memory is under contention, Docker attempts to keep the container memory within the limit. If the container requires more memory, it can consume up to the value specified by the Memory property or all of the available memory on the container instance—whichever comes first. At least one of memoryLimitMiB and memoryReservationMiB is required. - `minHealthyPercent`: number — The minimum number of tasks, specified as a percentage of the Amazon ECS service's DesiredCount value, that must continue to run and remain healthy during a deployment. **Default:** 0 if daemon, otherwise 50 - `placementConstraints`: [PlacementConstraint](/cdk/api/v2/docs/aws-cdk-lib.aws_ecs.PlacementConstraint.html)[] — The placement constraints to use for tasks in the service. **Default:** No constraints. For more information, see [Amazon ECS Task Placement Constraints](https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-constraints.html). - `placementStrategies`: [PlacementStrategy](/cdk/api/v2/docs/aws-cdk-lib.aws_ecs.PlacementStrategy.html)[] — The placement strategies to use for tasks in the service. **Default:** No strategies. For more information, see [Amazon ECS Task Placement Strategies](https://docs.aws.amazon.com/AmazonECS/latest/developerguide/task-placement-strategies.html). - `propagateTags`: [PropagatedTagSource](/cdk/api/v2/docs/aws-cdk-lib.aws_ecs.PropagatedTagSource.html) = none — Specifies whether to propagate the tags from the task definition or the service to the tasks in the service. Tags can only be propagated to the tasks within the service during service creation. - `publicLoadBalancer`: boolean = true — Determines whether the Load Balancer will be internet-facing. - `recordType`: [NetworkLoadBalancedServiceRecordType](/cdk/api/v2/docs/aws-cdk-lib.aws_ecs_patterns.NetworkLoadBalancedServiceRecordType.html) — Specifies whether the Route53 record should be a CNAME, an A record using the Alias feature or no record at all. **Default:** NetworkLoadBalancedServiceRecordType.ALIAS This is useful if you need to work with DNS systems that do not support alias records. - `serviceName`: string — The name of the service. **Default:** CloudFormation-generated name. - `taskDefinition`: [Ec2TaskDefinition](/cdk/api/v2/docs/aws-cdk-lib.aws_ecs.Ec2TaskDefinition.html) = none — The task definition to use for tasks in the service. TaskDefinition or TaskImageOptions must be specified, but not both.. [disable-awslint:ref-via-interface] - `taskImageOptions`: [NetworkLoadBalancedTaskImageOptions](/cdk/api/v2/docs/aws-cdk-lib.aws_ecs_patterns.NetworkLoadBalancedTaskImageOptions.html) = none — The properties required to create a new task definition. One of taskImageOptions or taskDefinition must be specified. - `vpc`: [IVpc](/cdk/api/v2/docs/aws-cdk-lib.aws_ec2.IVpc.html) — The VPC where the container instances will be launched or the elastic network interfaces (ENIs) will be deployed. **Default:** uses the VPC defined in the cluster or creates a new VPC. If a vpc is specified, the cluster construct should be omitted. Alternatively, you can omit both vpc and cluster.