Package software.amazon.awscdk.pipelines

package software.amazon.awscdk.pipelines

CDK Pipelines

A construct library for painless Continuous Delivery of CDK applications.

CDK Pipelines is an opinionated construct library. It is purpose-built to deploy one or more copies of your CDK applications using CloudFormation with a minimal amount of effort on your part. It is not intended to support arbitrary deployment pipelines, and very specifically it is not built to use CodeDeploy to deploy applications to instances, or deploy your custom-built ECR images to an ECS cluster directly: use CDK file assets with CloudFormation Init for instances, or CDK container assets for ECS clusters instead.

Give the CDK Pipelines way of doing things a shot first: you might find it does everything you need. If you need more control, or if you need v2 support from aws-codepipeline, we recommend you drop down to using the aws-codepipeline construct library directly.

This module contains two sets of APIs: an original and a modern version of CDK Pipelines. The modern API has been updated to be easier to work with and customize, and will be the preferred API going forward. The original version of the API is still available for backwards compatibility, but we recommend migrating to the new version if possible.

Compared to the original API, the modern API: has more sensible defaults; is more flexible; supports parallel deployments; supports multiple synth inputs; allows more control of CodeBuild project generation; supports deployment engines other than CodePipeline.

The README for the original API, as well as a migration guide, can be found in our GitHub repository.

At a glance

Deploying your application continuously starts by defining a MyApplicationStage, a subclass of Stage that contains the stacks that make up a single copy of your application.

You then define a Pipeline, instantiate as many instances of MyApplicationStage as you want for your test and production environments, with different parameters for each, and calling pipeline.addStage() for each of them. You can deploy to the same account and Region, or to a different one, with the same amount of code. The CDK Pipelines library takes care of the details.

CDK Pipelines supports multiple deployment engines (see Using a different deployment engine), and comes with a deployment engine that deploys CDK apps using AWS CodePipeline. To use the CodePipeline engine, define a CodePipeline construct. The following example creates a CodePipeline that deploys an application from GitHub: 

 /** The stacks for our app are minimally defined here.  The internals of these
   * stacks aren't important, except that DatabaseStack exposes an attribute
   * "table" for a database table it defines, and ComputeStack accepts a reference
   * to this table in its properties.
   */
 public class DatabaseStack extends Stack {
     public final TableV2 table;
 
     public DatabaseStack(Construct scope, String id) {
         super(scope, id);
         this.table = TableV2.Builder.create(this, "Table")
                 .partitionKey(Attribute.builder().name("id").type(AttributeType.STRING).build())
                 .build();
     }
 }
 
 public class ComputeProps {
     private TableV2 table;
     public TableV2 getTable() {
         return this.table;
     }
     public ComputeProps table(TableV2 table) {
         this.table = table;
         return this;
     }
 }
 
 public class ComputeStack extends Stack {
     public ComputeStack(Construct scope, String id, ComputeProps props) {
         super(scope, id);
     }
 }
 
 /**
  * Stack to hold the pipeline
  */
 public class MyPipelineStack extends Stack {
     public MyPipelineStack(Construct scope, String id) {
         this(scope, id, null);
     }
 
     public MyPipelineStack(Construct scope, String id, StackProps props) {
         super(scope, id, props);
 
         CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
                 .synth(ShellStep.Builder.create("Synth")
                         // Use a connection created using the AWS console to authenticate to GitHub
                         // Other sources are available.
                         .input(CodePipelineSource.connection("my-org/my-app", "main", ConnectionSourceOptions.builder()
                                 .connectionArn("arn:aws:codestar-connections:us-east-1:222222222222:connection/7d2469ff-514a-4e4f-9003-5ca4a43cdc41")
                                 .build()))
                         .commands(List.of("npm ci", "npm run build", "npx cdk synth"))
                         .build())
                 .build();
 
         // 'MyApplication' is defined below. Call `addStage` as many times as
         // necessary with any account and region (may be different from the
         // pipeline's).
         pipeline.addStage(MyApplication.Builder.create(this, "Prod")
                 .env(Environment.builder()
                         .account("123456789012")
                         .region("eu-west-1")
                         .build())
                 .build());
     }
 }
 
 /**
  * Your application
  *
  * May consist of one or more Stacks (here, two)
  *
  * By declaring our DatabaseStack and our ComputeStack inside a Stage,
  * we make sure they are deployed together, or not at all.
  */
 public class MyApplication extends Stage {
     public MyApplication(Construct scope, String id) {
         this(scope, id, null);
     }
 
     public MyApplication(Construct scope, String id, StageProps props) {
         super(scope, id, props);
 
         DatabaseStack dbStack = new DatabaseStack(this, "Database");
         new ComputeStack(this, "Compute", new ComputeProps()
                 .table(dbStack.getTable())
                 );
     }
 }
 
 // In your main file
 // In your main file
 MyPipelineStack.Builder.create(this, "PipelineStack")
         .env(Environment.builder()
                 .account("123456789012")
                 .region("eu-west-1")
                 .build())
         .build();

The pipeline is self-mutating, which means that if you add new application stages in the source code, or new stacks to MyApplication, the pipeline will automatically reconfigure itself to deploy those new stages and stacks.

(Note that you have to bootstrap all environments before the above code will work, and switch on "Modern synthesis" if you are using CDKv1. See the section CDK Environment Bootstrapping below for more information).

Provisioning the pipeline

To provision the pipeline you have defined, make sure the target environment has been bootstrapped (see below), and then execute deploying the PipelineStack once. Afterwards, the pipeline will keep itself up-to-date.

Important: be sure to git commit and git push before deploying the Pipeline stack using cdk deploy!

The reason is that the pipeline will start deploying and self-mutating right away based on the sources in the repository, so the sources it finds in there should be the ones you want it to find.

Run the following commands to get the pipeline going: 

 $ git commit -a
 $ git push
 $ cdk deploy PipelineStack

Administrative permissions to the account are only necessary up until this point. We recommend you remove access to these credentials after doing this.

Working on the pipeline

The self-mutation feature of the Pipeline might at times get in the way of the pipeline development workflow. Each change to the pipeline must be pushed to git, otherwise, after the pipeline was updated using cdk deploy, it will automatically revert to the state found in git.

To make the development more convenient, the self-mutation feature can be turned off temporarily, by passing selfMutation: false property, example: 

 // Modern API
 CodePipeline modernPipeline = CodePipeline.Builder.create(this, "Pipeline")
         .selfMutation(false)
         .synth(ShellStep.Builder.create("Synth")
                 .input(CodePipelineSource.connection("my-org/my-app", "main", ConnectionSourceOptions.builder()
                         .connectionArn("arn:aws:codestar-connections:us-east-1:222222222222:connection/7d2469ff-514a-4e4f-9003-5ca4a43cdc41")
                         .build()))
                 .commands(List.of("npm ci", "npm run build", "npx cdk synth"))
                 .build())
         .build();
 
 // Original API
 Artifact cloudAssemblyArtifact = new Artifact();
 CdkPipeline originalPipeline = new CdkPipeline(this, "Pipeline", new CdkPipelineProps()
         .selfMutating(false)
         .cloudAssemblyArtifact(cloudAssemblyArtifact)
         );

Defining the pipeline

This section of the documentation describes the AWS CodePipeline engine, which comes with this library. If you want to use a different deployment engine, read the section Using a different deployment engine below.

Synth and sources

To define a pipeline, instantiate a CodePipeline construct from the aws-cdk-lib/pipelines module. It takes one argument, a synth step, which is expected to produce the CDK Cloud Assembly as its single output (the contents of the cdk.out directory after running cdk synth). "Steps" are arbitrary actions in the pipeline, typically used to run scripts or commands.

For the synth, use a ShellStep and specify the commands necessary to install dependencies, the CDK CLI, build your project and run cdk synth; the specific commands required will depend on the programming language you are using. For a typical NPM-based project, the synth will look like this: 

 IFileSetProducer source;
 // the repository source
 
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         .synth(ShellStep.Builder.create("Synth")
                 .input(source)
                 .commands(List.of("npm ci", "npm run build", "npx cdk synth"))
                 .build())
         .build();

The pipeline assumes that your ShellStep will produce a cdk.out directory in the root, containing the CDK cloud assembly. If your CDK project lives in a subdirectory, be sure to adjust the primaryOutputDirectory to match: 

 IFileSetProducer source;
 // the repository source
 
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         .synth(ShellStep.Builder.create("Synth")
                 .input(source)
                 .commands(List.of("cd mysubdir", "npm ci", "npm run build", "npx cdk synth"))
                 .primaryOutputDirectory("mysubdir/cdk.out")
                 .build())
         .build();

The underlying aws-cdk-lib/aws-codepipeline.Pipeline construct will be produced when app.synth() is called. You can also force it to be produced earlier by calling pipeline.buildPipeline(). After you've called that method, you can inspect the constructs that were produced by accessing the properties of the pipeline object.

Commands for other languages and package managers

The commands you pass to new ShellStep will be very similar to the commands you run on your own workstation to install dependencies and synth your CDK project. Here are some (non-exhaustive) examples for what those commands might look like in a number of different situations.

For Yarn, the install commands are different: 

 IFileSetProducer source;
 // the repository source
 
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         .synth(ShellStep.Builder.create("Synth")
                 .input(source)
                 .commands(List.of("yarn install --frozen-lockfile", "yarn build", "npx cdk synth"))
                 .build())
         .build();

For Python projects, remember to install the CDK CLI globally (as there is no package.json to automatically install it for you): 

 IFileSetProducer source;
 // the repository source
 
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         .synth(ShellStep.Builder.create("Synth")
                 .input(source)
                 .commands(List.of("pip install -r requirements.txt", "npm install -g aws-cdk", "cdk synth"))
                 .build())
         .build();

For Java projects, remember to install the CDK CLI globally (as there is no package.json to automatically install it for you), and the Maven compilation step is automatically executed for you as you run cdk synth: 

 IFileSetProducer source;
 // the repository source
 
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         .synth(ShellStep.Builder.create("Synth")
                 .input(source)
                 .commands(List.of("npm install -g aws-cdk", "cdk synth"))
                 .build())
         .build();

You can adapt these examples to your own situation.

Migrating from buildspec.yml files

You may currently have the build instructions for your CodeBuild Projects in a buildspec.yml file in your source repository. In addition to your build commands, the CodeBuild Project's buildspec also controls some information that CDK Pipelines manages for you, like artifact identifiers, input artifact locations, Docker authorization, and exported variables.

Since there is no way in general for CDK Pipelines to modify the file in your resource repository, CDK Pipelines configures the BuildSpec directly on the CodeBuild Project, instead of loading it from the buildspec.yml file. This requires a pipeline self-mutation to update.

To avoid this, put your build instructions in a separate script, for example build.sh, and call that script from the build commands array: 

 IFileSetProducer source;
 
 
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         .synth(ShellStep.Builder.create("Synth")
                 .input(source)
                 .commands(List.of("./build.sh"))
                 .build())
         .build();

Doing so keeps your exact build instructions in sync with your source code in the source repository where it belongs, and provides a convenient build script for developers at the same time.

CodePipeline Sources

In CodePipeline, Sources define where the source of your application lives. When a change to the source is detected, the pipeline will start executing. Source objects can be created by factory methods on the CodePipelineSource class:

GitHub, GitHub Enterprise, BitBucket using a connection

The recommended way of connecting to GitHub or BitBucket is by using a connection. You will first use the AWS Console to authenticate to the source control provider, and then use the connection ARN in your pipeline definition: 

 CodePipelineSource.connection("org/repo", "branch", ConnectionSourceOptions.builder()
         .connectionArn("arn:aws:codestar-connections:us-east-1:222222222222:connection/7d2469ff-514a-4e4f-9003-5ca4a43cdc41")
         .build());

GitHub using OAuth

You can also authenticate to GitHub using a personal access token. This expects that you've created a personal access token and stored it in Secrets Manager. By default, the source object will look for a secret named github-token, but you can change the name. The token should have the repo and admin:repo_hook scopes. 

 CodePipelineSource.gitHub("org/repo", "branch", GitHubSourceOptions.builder()
         // This is optional
         .authentication(SecretValue.secretsManager("my-token"))
         .build());

CodeCommit

You can use a CodeCommit repository as the source. Either create or import that the CodeCommit repository and then use CodePipelineSource.codeCommit to reference it: 

 IRepository repository = Repository.fromRepositoryName(this, "Repository", "my-repository");
 CodePipelineSource.codeCommit(repository, "main");

S3

You can use a zip file in S3 as the source of the pipeline. The pipeline will be triggered every time the file in S3 is changed: 

 IBucket bucket = Bucket.fromBucketName(this, "Bucket", "my-bucket");
 CodePipelineSource.s3(bucket, "my/source.zip");

ECR

You can use a Docker image in ECR as the source of the pipeline. The pipeline will be triggered every time an image is pushed to ECR: 

 Repository repository = new Repository(this, "Repository");
 CodePipelineSource.ecr(repository);

Additional inputs

ShellStep allows passing in more than one input: additional inputs will be placed in the directories you specify. Any step that produces an output file set can be used as an input, such as a CodePipelineSource, but also other ShellStep: 

 ShellStep prebuild = ShellStep.Builder.create("Prebuild")
         .input(CodePipelineSource.gitHub("myorg/repo1", "main"))
         .primaryOutputDirectory("./build")
         .commands(List.of("./build.sh"))
         .build();
 
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         .synth(ShellStep.Builder.create("Synth")
                 .input(CodePipelineSource.gitHub("myorg/repo2", "main"))
                 .additionalInputs(Map.of(
                         "subdir", CodePipelineSource.gitHub("myorg/repo3", "main"),
                         "../siblingdir", prebuild))
 
                 .commands(List.of("./build.sh"))
                 .build())
         .build();

CDK application deployments

After you have defined the pipeline and the synth step, you can add one or more CDK Stages which will be deployed to their target environments. To do so, call pipeline.addStage() on the Stage object: 

 CodePipeline pipeline;
 
 // Do this as many times as necessary with any account and region
 // Account and region may different from the pipeline's.
 pipeline.addStage(MyApplicationStage.Builder.create(this, "Prod")
         .env(Environment.builder()
                 .account("123456789012")
                 .region("eu-west-1")
                 .build())
         .build());

CDK Pipelines will automatically discover all Stacks in the given Stage object, determine their dependency order, and add appropriate actions to the pipeline to publish the assets referenced in those stacks and deploy the stacks in the right order.

If the Stacks are targeted at an environment in a different AWS account or Region and that environment has been bootstrapped , CDK Pipelines will transparently make sure the IAM roles are set up correctly and any requisite replication Buckets are created.

Deploying in parallel

By default, all applications added to CDK Pipelines by calling addStage() will be deployed in sequence, one after the other. If you have a lot of stages, you can speed up the pipeline by choosing to deploy some stages in parallel. You do this by calling addWave() instead of addStage(): a wave is a set of stages that are all deployed in parallel instead of sequentially. Waves themselves are still deployed in sequence. For example, the following will deploy two copies of your application to eu-west-1 and eu-central-1 in parallel: 

 CodePipeline pipeline;
 
 Wave europeWave = pipeline.addWave("Europe");
 europeWave.addStage(MyApplicationStage.Builder.create(this, "Ireland")
         .env(Environment.builder().region("eu-west-1").build())
         .build());
 europeWave.addStage(MyApplicationStage.Builder.create(this, "Germany")
         .env(Environment.builder().region("eu-central-1").build())
         .build());

Deploying to other accounts / encrypting the Artifact Bucket

CDK Pipelines can transparently deploy to other Regions and other accounts (provided those target environments have been bootstrapped). However, deploying to another account requires one additional piece of configuration: you need to enable crossAccountKeys: true when creating the pipeline.

This will encrypt the artifact bucket(s), but incurs a cost for maintaining the KMS key.

You may also wish to enable automatic key rotation for the created KMS key.

Example: 

 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         // Encrypt artifacts, required for cross-account deployments
         .crossAccountKeys(true)
         .enableKeyRotation(true) // optional
         .synth(ShellStep.Builder.create("Synth")
                 .input(CodePipelineSource.connection("my-org/my-app", "main", ConnectionSourceOptions.builder()
                         .connectionArn("arn:aws:codestar-connections:us-east-1:222222222222:connection/7d2469ff-514a-4e4f-9003-5ca4a43cdc41")
                         .build()))
                 .commands(List.of("npm ci", "npm run build", "npx cdk synth"))
                 .build())
         .build();

Deploying without change sets

Deployment is done by default with CodePipeline engine using change sets, i.e. to first create a change set and then execute it. This allows you to inject steps that inspect the change set and approve or reject it, but failed deployments are not retryable and creation of the change set costs time.

The creation of change sets can be switched off by setting useChangeSets: false: 

 ShellStep synth;
 
 
 public class PipelineStack extends Stack {
     public PipelineStack(Construct scope, String id) {
         this(scope, id, null);
     }
 
     public PipelineStack(Construct scope, String id, StackProps props) {
         super(scope, id, props);
 
         CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
                 .synth(synth)
 
                 // Disable change set creation and make deployments in pipeline as single step
                 .useChangeSets(false)
                 .build();
     }
 }

Validation

Every addStage() and addWave() command takes additional options. As part of these options, you can specify pre and post steps, which are arbitrary steps that run before or after the contents of the stage or wave, respectively. You can use these to add validations like manual or automated gates to your pipeline. We recommend putting manual approval gates in the set of pre steps, and automated approval gates in the set of post steps.

The following example shows both an automated approval in the form of a ShellStep, and a manual approval in the form of a ManualApprovalStep added to the pipeline. Both must pass in order to promote from the PreProd to the Prod environment: 

 CodePipeline pipeline;
 
 MyApplicationStage preprod = new MyApplicationStage(this, "PreProd");
 MyApplicationStage prod = new MyApplicationStage(this, "Prod");
 
 pipeline.addStage(preprod, AddStageOpts.builder()
         .post(List.of(
             ShellStep.Builder.create("Validate Endpoint")
                     .commands(List.of("curl -Ssf https://my.webservice.com/"))
                     .build()))
         .build());
 pipeline.addStage(prod, AddStageOpts.builder()
         .pre(List.of(
             new ManualApprovalStep("PromoteToProd")))
         .build());

You can also specify steps to be executed at the stack level. To achieve this, you can specify the stack and step via the stackSteps property: 

 CodePipeline pipeline;
 public class MyStacksStage extends Stage {
     public final Stack stack1;
     public final Stack stack2;
 
     public MyStacksStage(Construct scope, String id) {
         this(scope, id, null);
     }
 
     public MyStacksStage(Construct scope, String id, StageProps props) {
         super(scope, id, props);
         this.stack1 = new Stack(this, "stack1");
         this.stack2 = new Stack(this, "stack2");
     }
 }
 MyStacksStage prod = new MyStacksStage(this, "Prod");
 
 pipeline.addStage(prod, AddStageOpts.builder()
         .stackSteps(List.of(StackSteps.builder()
                 .stack(prod.getStack1())
                 .pre(List.of(new ManualApprovalStep("Pre-Stack Check"))) // Executed before stack is prepared
                 .changeSet(List.of(new ManualApprovalStep("ChangeSet Approval"))) // Executed after stack is prepared but before the stack is deployed
                 .post(List.of(new ManualApprovalStep("Post-Deploy Check")))
                 .build(), StackSteps.builder()
                 .stack(prod.getStack2())
                 .post(List.of(new ManualApprovalStep("Post-Deploy Check")))
                 .build()))
         .build());

If you specify multiple steps, they will execute in parallel by default. You can add dependencies between them to if you wish to specify an order. To add a dependency, call step.addStepDependency(): 

 ManualApprovalStep firstStep = new ManualApprovalStep("A");
 ManualApprovalStep secondStep = new ManualApprovalStep("B");
 secondStep.addStepDependency(firstStep);

For convenience, Step.sequence() will take an array of steps and dependencies between adjacent steps, so that the whole list executes in order: 

 // Step A will depend on step B and step B will depend on step C
 Step[] orderedSteps = Step.sequence(List.of(
     new ManualApprovalStep("A"),
     new ManualApprovalStep("B"),
     new ManualApprovalStep("C")));

Using CloudFormation Stack Outputs in approvals

Because many CloudFormation deployments result in the generation of resources with unpredictable names, validations have support for reading back CloudFormation Outputs after a deployment. This makes it possible to pass (for example) the generated URL of a load balancer to the test set.

To use Stack Outputs, expose the CfnOutput object you're interested in, and pass it to envFromCfnOutputs of the ShellStep: 

 CodePipeline pipeline;
 public class MyOutputStage extends Stage {
     public final CfnOutput loadBalancerAddress;
 
     public MyOutputStage(Construct scope, String id) {
         this(scope, id, null);
     }
 
     public MyOutputStage(Construct scope, String id, StageProps props) {
         super(scope, id, props);
         this.loadBalancerAddress = CfnOutput.Builder.create(this, "Output").value("value").build();
     }
 }
 
 MyOutputStage lbApp = new MyOutputStage(this, "MyApp");
 pipeline.addStage(lbApp, AddStageOpts.builder()
         .post(List.of(
             ShellStep.Builder.create("HitEndpoint")
                     .envFromCfnOutputs(Map.of(
                             // Make the load balancer address available as $URL inside the commands
                             "URL", lbApp.getLoadBalancerAddress()))
                     .commands(List.of("curl -Ssf $URL"))
                     .build()))
         .build());

Running scripts compiled during the synth step

As part of a validation, you probably want to run a test suite that's more elaborate than what can be expressed in a couple of lines of shell script. You can bring additional files into the shell script validation by supplying the input or additionalInputs property of ShellStep. The input can be produced by the Synth step, or come from a source or any other build step.

Here's an example that captures an additional output directory in the synth step and runs tests from there: 

 ShellStep synth;
 
 MyApplicationStage stage = new MyApplicationStage(this, "MyApplication");
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline").synth(synth).build();
 
 pipeline.addStage(stage, AddStageOpts.builder()
         .post(List.of(
             ShellStep.Builder.create("Approve")
                     // Use the contents of the 'integ' directory from the synth step as the input
                     .input(synth.addOutputDirectory("integ"))
                     .commands(List.of("cd integ && ./run.sh"))
                     .build()))
         .build());

Customizing CodeBuild Projects

CDK pipelines will generate CodeBuild projects for each ShellStep you use, and it will also generate CodeBuild projects to publish assets and perform the self-mutation of the pipeline. To control the various aspects of the CodeBuild projects that get generated, use a CodeBuildStep instead of a ShellStep. This class has a number of properties that allow you to customize various aspects of the projects: 

 Vpc vpc;
 SecurityGroup mySecurityGroup;
 
 CodeBuildStep.Builder.create("Synth")
         // ...standard ShellStep props...
         .commands(List.of())
         .env(Map.of())
 
         // If you are using a CodeBuildStep explicitly, set the 'cdk.out' directory
         // to be the synth step's output.
         .primaryOutputDirectory("cdk.out")
 
         // Control the name of the project
         .projectName("MyProject")
 
         // Control parts of the BuildSpec other than the regular 'build' and 'install' commands
         .partialBuildSpec(BuildSpec.fromObject(Map.of(
                 "version", "0.2")))
 
         // Control the build environment
         .buildEnvironment(BuildEnvironment.builder()
                 .computeType(ComputeType.LARGE)
                 .privileged(true)
                 .build())
         .timeout(Duration.minutes(90))
         .fileSystemLocations(List.of(FileSystemLocation.efs(EfsFileSystemLocationProps.builder()
                 .identifier("myidentifier2")
                 .location("myclodation.mydnsroot.com:/loc")
                 .mountPoint("/media")
                 .mountOptions("opts")
                 .build())))
 
         // Control Elastic Network Interface creation
         .vpc(vpc)
         .subnetSelection(SubnetSelection.builder().subnetType(SubnetType.PRIVATE_WITH_EGRESS).build())
         .securityGroups(List.of(mySecurityGroup))
 
         // Control caching
         .cache(Cache.bucket(new Bucket(this, "Cache")))
 
         // Additional policy statements for the execution role
         .rolePolicyStatements(List.of(
             PolicyStatement.Builder.create().build()))
         .build();

You can also configure defaults for all CodeBuild projects by passing codeBuildDefaults, or just for the synth, asset publishing, and self-mutation projects by passing synthCodeBuildDefaults, assetPublishingCodeBuildDefaults, or selfMutationCodeBuildDefaults: 

 import software.amazon.awscdk.services.logs.*;
 
 Vpc vpc;
 SecurityGroup mySecurityGroup;
 
 
 CodePipeline.Builder.create(this, "Pipeline")
         // Standard CodePipeline properties
         .synth(ShellStep.Builder.create("Synth")
                 .input(CodePipelineSource.connection("my-org/my-app", "main", ConnectionSourceOptions.builder()
                         .connectionArn("arn:aws:codestar-connections:us-east-1:222222222222:connection/7d2469ff-514a-4e4f-9003-5ca4a43cdc41")
                         .build()))
                 .commands(List.of("npm ci", "npm run build", "npx cdk synth"))
                 .build())
 
         // Defaults for all CodeBuild projects
         .codeBuildDefaults(CodeBuildOptions.builder()
                 // Prepend commands and configuration to all projects
                 .partialBuildSpec(BuildSpec.fromObject(Map.of(
                         "version", "0.2")))
 
                 // Control the build environment
                 .buildEnvironment(BuildEnvironment.builder()
                         .computeType(ComputeType.LARGE)
                         .build())
 
                 // Control Elastic Network Interface creation
                 .vpc(vpc)
                 .subnetSelection(SubnetSelection.builder().subnetType(SubnetType.PRIVATE_WITH_EGRESS).build())
                 .securityGroups(List.of(mySecurityGroup))
 
                 // Additional policy statements for the execution role
                 .rolePolicy(List.of(
                     PolicyStatement.Builder.create().build()))
 
                 // Information about logs
                 .logging(LoggingOptions.builder()
                         .cloudWatch(CloudWatchLoggingOptions.builder()
                                 .logGroup(new LogGroup(this, "MyLogGroup"))
                                 .build())
                         .s3(S3LoggingOptions.builder()
                                 .bucket(new Bucket(this, "LogBucket"))
                                 .build())
                         .build())
                 .build())
 
         .synthCodeBuildDefaults(CodeBuildOptions.builder().build())
         .assetPublishingCodeBuildDefaults(CodeBuildOptions.builder().build())
         .selfMutationCodeBuildDefaults(CodeBuildOptions.builder().build())
         .build();

Arbitrary CodePipeline actions

If you want to add a type of CodePipeline action to the CDK Pipeline that doesn't have a matching class yet, you can define your own step class that extends Step and implements ICodePipelineActionFactory.

Here's an example that adds a Jenkins step: 

 public class MyJenkinsStep extends Step implements ICodePipelineActionFactory {
     public MyJenkinsStep(JenkinsProvider provider, FileSet input) {
         super("MyJenkinsStep");
 
         // This is necessary if your step accepts parameters, like environment variables,
         // that may contain outputs from other steps. It doesn't matter what the
         // structure is, as long as it contains the values that may contain outputs.
         this.discoverReferencedOutputs(Map.of(
                 "env", Map.of()));
     }
 
     public CodePipelineActionFactoryResult produceAction(IStage stage, ProduceActionOptions options) {
 
         // This is where you control what type of Action gets added to the
         // CodePipeline
         stage.addAction(JenkinsAction.Builder.create()
                 // Copy 'actionName' and 'runOrder' from the options
                 .actionName(options.getActionName())
                 .runOrder(options.getRunOrder())
 
                 // Jenkins-specific configuration
                 .type(JenkinsActionType.TEST)
                 .jenkinsProvider(this.provider)
                 .projectName("MyJenkinsProject")
 
                 // Translate the FileSet into a codepipeline.Artifact
                 .inputs(List.of(options.artifacts.toCodePipeline(this.input)))
                 .build());
 
         return CodePipelineActionFactoryResult.builder().runOrdersConsumed(1).build();
     }
 }

Another example, adding a lambda step referencing outputs from a stack: 

 public class MyLambdaStep extends Step implements ICodePipelineActionFactory {
     private StackOutputReference stackOutputReference;
 
     public MyLambdaStep(Function fn, CfnOutput stackOutput) {
         super("MyLambdaStep");
         this.stackOutputReference = StackOutputReference.fromCfnOutput(stackOutput);
     }
 
     public CodePipelineActionFactoryResult produceAction(IStage stage, ProduceActionOptions options) {
 
         stage.addAction(LambdaInvokeAction.Builder.create()
                 .actionName(options.getActionName())
                 .runOrder(options.getRunOrder())
                 // Map the reference to the variable name the CDK has generated for you.
                 .userParameters(Map.of("stackOutput", options.stackOutputsMap.toCodePipeline(this.stackOutputReference)))
                 .lambda(this.fn)
                 .build());
 
         return CodePipelineActionFactoryResult.builder().runOrdersConsumed(1).build();
     }public get consumedStackOutputs(): pipelines.StackOutputReference[] {
         return [this.stackOutputReference];
       }
 }

Using an existing AWS Codepipeline

If you wish to use an existing CodePipeline.Pipeline while using the modern API's methods and classes, you can pass in the existing CodePipeline.Pipeline to be built upon instead of having the pipelines.CodePipeline construct create a new CodePipeline.Pipeline. This also gives you more direct control over the underlying CodePipeline.Pipeline construct if the way the modern API creates it doesn't allow for desired configurations. Use CodePipelineFileset to convert CodePipeline artifacts into CDK Pipelines file sets, that can be used everywhere a file set or file set producer is expected.

Here's an example of passing in an existing pipeline and using a source that's already in the pipeline: 

 Pipeline codePipeline;
 
 
 Artifact sourceArtifact = new Artifact("MySourceArtifact");
 
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         .codePipeline(codePipeline)
         .synth(ShellStep.Builder.create("Synth")
                 .input(CodePipelineFileSet.fromArtifact(sourceArtifact))
                 .commands(List.of("npm ci", "npm run build", "npx cdk synth"))
                 .build())
         .build();

If your existing pipeline already provides a synth step, pass the existing artifact in place of the synth step: 

 Pipeline codePipeline;
 
 
 Artifact buildArtifact = new Artifact("MyBuildArtifact");
 
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         .codePipeline(codePipeline)
         .synth(CodePipelineFileSet.fromArtifact(buildArtifact))
         .build();

Note that if you provide an existing pipeline, you cannot provide values for pipelineName, crossAccountKeys, reuseCrossRegionSupportStacks, or role because those values are passed in directly to the underlying codepipeline.Pipeline.

Using Docker in the pipeline

Docker can be used in 3 different places in the pipeline:

  • If you are using Docker image assets in your application stages: Docker will run in the asset publishing projects.
  • If you are using Docker image assets in your stack (for example as images for your CodeBuild projects): Docker will run in the self-mutate project.
  • If you are using Docker to bundle file assets anywhere in your project (for example, if you are using such construct libraries as aws-cdk-lib/aws-lambda-nodejs): Docker will run in the synth project.

For the first case, you don't need to do anything special. For the other two cases, you need to make sure that privileged mode is enabled on the correct CodeBuild projects, so that Docker can run correctly. The follow sections describe how to do that.

You may also need to authenticate to Docker registries to avoid being throttled. See the section Authenticating to Docker registries below for information on how to do that.

Using Docker image assets in the pipeline

If your PipelineStack is using Docker image assets (as opposed to the application stacks the pipeline is deploying), for example by the use of LinuxBuildImage.fromAsset(), you need to pass dockerEnabledForSelfMutation: true to the pipeline. For example: 

 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         .synth(ShellStep.Builder.create("Synth")
                 .input(CodePipelineSource.connection("my-org/my-app", "main", ConnectionSourceOptions.builder()
                         .connectionArn("arn:aws:codestar-connections:us-east-1:222222222222:connection/7d2469ff-514a-4e4f-9003-5ca4a43cdc41")
                         .build()))
                 .commands(List.of("npm ci", "npm run build", "npx cdk synth"))
                 .build())
 
         // Turn this on because the pipeline uses Docker image assets
         .dockerEnabledForSelfMutation(true)
         .build();
 
 pipeline.addWave("MyWave", WaveOptions.builder()
         .post(List.of(
             CodeBuildStep.Builder.create("RunApproval")
                     .commands(List.of("command-from-image"))
                     .buildEnvironment(BuildEnvironment.builder()
                             // The user of a Docker image asset in the pipeline requires turning on
                             // 'dockerEnabledForSelfMutation'.
                             .buildImage(LinuxBuildImage.fromAsset(this, "Image", DockerImageAssetProps.builder()
                                     .directory("./docker-image")
                                     .build()))
                             .build())
                     .build()))
         .build());

Important: You must turn on the dockerEnabledForSelfMutation flag, commit and allow the pipeline to self-update before adding the actual Docker asset.

Using bundled file assets

If you are using asset bundling anywhere (such as automatically done for you if you add a construct like aws-cdk-lib/aws-lambda-nodejs), you need to pass dockerEnabledForSynth: true to the pipeline. For example: 

 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         .synth(ShellStep.Builder.create("Synth")
                 .input(CodePipelineSource.connection("my-org/my-app", "main", ConnectionSourceOptions.builder()
                         .connectionArn("arn:aws:codestar-connections:us-east-1:222222222222:connection/7d2469ff-514a-4e4f-9003-5ca4a43cdc41")
                         .build()))
                 .commands(List.of("npm ci", "npm run build", "npx cdk synth"))
                 .build())
 
         // Turn this on because the application uses bundled file assets
         .dockerEnabledForSynth(true)
         .build();

Important: You must turn on the dockerEnabledForSynth flag, commit and allow the pipeline to self-update before adding the actual Docker asset.

Authenticating to Docker registries

You can specify credentials to use for authenticating to Docker registries as part of the pipeline definition. This can be useful if any Docker image assets — in the pipeline or any of the application stages — require authentication, either due to being in a different environment (e.g., ECR repo) or to avoid throttling (e.g., DockerHub). 

 ISecret dockerHubSecret = Secret.fromSecretCompleteArn(this, "DHSecret", "arn:aws:...");
 ISecret customRegSecret = Secret.fromSecretCompleteArn(this, "CRSecret", "arn:aws:...");
 IRepository repo1 = Repository.fromRepositoryArn(this, "Repo", "arn:aws:ecr:eu-west-1:0123456789012:repository/Repo1");
 IRepository repo2 = Repository.fromRepositoryArn(this, "Repo", "arn:aws:ecr:eu-west-1:0123456789012:repository/Repo2");
 
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         .dockerCredentials(List.of(DockerCredential.dockerHub(dockerHubSecret), DockerCredential.customRegistry("dockerregistry.example.com", customRegSecret), DockerCredential.ecr(List.of(repo1, repo2))))
         .synth(ShellStep.Builder.create("Synth")
                 .input(CodePipelineSource.connection("my-org/my-app", "main", ConnectionSourceOptions.builder()
                         .connectionArn("arn:aws:codestar-connections:us-east-1:222222222222:connection/7d2469ff-514a-4e4f-9003-5ca4a43cdc41")
                         .build()))
                 .commands(List.of("npm ci", "npm run build", "npx cdk synth"))
                 .build())
         .build();

For authenticating to Docker registries that require a username and password combination (like DockerHub), create a Secrets Manager Secret with fields named username and secret, and import it (the field names change be customized).

Authentication to ECR repositories is done using the execution role of the relevant CodeBuild job. Both types of credentials can be provided with an optional role to assume before requesting the credentials.

By default, the Docker credentials provided to the pipeline will be available to the Synth, Self-Update, and Asset Publishing actions within the *pipeline. The scope of the credentials can be limited via the DockerCredentialUsage option. 

 ISecret dockerHubSecret = Secret.fromSecretCompleteArn(this, "DHSecret", "arn:aws:...");
 // Only the image asset publishing actions will be granted read access to the secret.
 DockerCredential creds = DockerCredential.dockerHub(dockerHubSecret, ExternalDockerCredentialOptions.builder().usages(List.of(DockerCredentialUsage.ASSET_PUBLISHING)).build());

CDK Environment Bootstrapping

An environment is an (account, region) pair where you want to deploy a CDK stack (see Environments in the CDK Developer Guide). In a Continuous Deployment pipeline, there are at least two environments involved: the environment where the pipeline is provisioned, and the environment where you want to deploy the application (or different stages of the application). These can be the same, though best practices recommend you isolate your different application stages from each other in different AWS accounts or regions.

Before you can provision the pipeline, you have to bootstrap the environment you want to create it in. If you are deploying your application to different environments, you also have to bootstrap those and be sure to add a trust relationship.

After you have bootstrapped an environment and created a pipeline that deploys to it, it's important that you don't delete the stack or change its Qualifier, or future deployments to this environment will fail. If you want to upgrade the bootstrap stack to a newer version, do that by updating it in-place.

This library requires the modern bootstrapping stack which has been updated specifically to support cross-account continuous delivery.

If you are using CDKv2, you do not need to do anything else. Modern bootstrapping and modern stack synthesis (also known as "default stack synthesis") is the default.

If you are using CDKv1, you need to opt in to modern bootstrapping and modern stack synthesis using a feature flag. Make sure cdk.json includes: 

 {
   "context": {
     "@aws-cdk/core:newStyleStackSynthesis": true
   }
 }

And be sure to run cdk bootstrap in the same directory as the cdk.json file.

To bootstrap an environment for provisioning the pipeline: 

 $ npx cdk bootstrap \
     [--profile admin-profile-1] \
     --cloudformation-execution-policies arn:aws:iam::aws:policy/AdministratorAccess \
     aws://111111111111/us-east-1

To bootstrap a different environment for deploying CDK applications into using a pipeline in account 111111111111: 

 $ npx cdk bootstrap \
     [--profile admin-profile-2] \
     --cloudformation-execution-policies arn:aws:iam::aws:policy/AdministratorAccess \
     --trust 11111111111 \
     aws://222222222222/us-east-2

If you only want to trust an account to do lookups (e.g, when your CDK application has a Vpc.fromLookup() call), use the option --trust-for-lookup: 

 $ npx cdk bootstrap \
     [--profile admin-profile-2] \
     --cloudformation-execution-policies arn:aws:iam::aws:policy/AdministratorAccess \
     --trust-for-lookup 11111111111 \
     aws://222222222222/us-east-2

These command lines explained:

  • npx: means to use the CDK CLI from the current NPM install. If you are using a global install of the CDK CLI, leave this out.
  • --profile: should indicate a profile with administrator privileges that has permissions to provision a pipeline in the indicated account. You can leave this flag out if either the AWS default credentials or the AWS_* environment variables confer these permissions.
  • --cloudformation-execution-policies: ARN of the managed policy that future CDK deployments should execute with. By default this is AdministratorAccess, but if you also specify the --trust flag to give another Account permissions to deploy into the current account, you must specify a value here.
  • --trust: indicates which other account(s) should have permissions to deploy CDK applications into this account. In this case we indicate the Pipeline's account, but you could also use this for developer accounts (don't do that for production application accounts though!).
  • --trust-for-lookup: gives a more limited set of permissions to the trusted account, only allowing it to look up values such as availability zones, EC2 images and VPCs. --trust-for-lookup does not give permissions to modify anything in the account. Note that --trust implies --trust-for-lookup, so you don't need to specify the same account twice.
  • aws://222222222222/us-east-2: the account and region we're bootstrapping.

Be aware that anyone who has access to the trusted Accounts effectively has all permissions conferred by the configured CloudFormation execution policies, allowing them to do things like read arbitrary S3 buckets and create arbitrary infrastructure in the bootstrapped account. Restrict the list of --trusted Accounts, or restrict the policies configured by --cloudformation-execution-policies.


Security tip: we recommend that you use administrative credentials to an account only to bootstrap it and provision the initial pipeline. Otherwise, access to administrative credentials should be dropped as soon as possible.


On the use of AdministratorAccess: The use of the AdministratorAccess policy ensures that your pipeline can deploy every type of AWS resource to your account. Make sure you trust all the code and dependencies that make up your CDK app. Check with the appropriate department within your organization to decide on the proper policy to use.

If your policy includes permissions to create on attach permission to a role, developers can escalate their privilege with more permissive permission. Thus, we recommend implementing permissions boundary in the CDK Execution role. To do this, you can bootstrap with the --template option with a customized template that contains a permission boundary.

Migrating from old bootstrap stack

The bootstrap stack is a CloudFormation stack in your account named CDKToolkit that provisions a set of resources required for the CDK to deploy into that environment.

The "new" bootstrap stack (obtained by running cdk bootstrap with CDK_NEW_BOOTSTRAP=1) is slightly more elaborate than the "old" stack. It contains:

  • An S3 bucket and ECR repository with predictable names, so that we can reference assets in these storage locations without the use of CloudFormation template parameters.
  • A set of roles with permissions to access these asset locations and to execute CloudFormation, assumable from whatever accounts you specify under --trust.

It is possible and safe to migrate from the old bootstrap stack to the new bootstrap stack. This will create a new S3 file asset bucket in your account and orphan the old bucket. You should manually delete the orphaned bucket after you are sure you have redeployed all CDK applications and there are no more references to the old asset bucket.

Considerations around Running at Scale

If you are planning to run pipelines for more than a hundred repos deploying across multiple regions, then you will want to consider reusing both artifacts buckets and cross-region replication buckets.

In a situation like this, you will want to have a separate CDK app / dedicated repo which creates and managed the buckets which will be shared by the pipelines of all your other apps. Note that this app must NOT be using the shared buckets because of chicken & egg issues.

The following code assumes you have created and are managing your buckets in the aforementioned separate cdk repo and are just importing them for use in one of your (many) pipelines. 

 String sharedXRegionUsWest1BucketArn;
 String sharedXRegionUsWest1KeyArn;
 
 String sharedXRegionUsWest2BucketArn;
 String sharedXRegionUsWest2KeyArn;
 
 
 IBucket usWest1Bucket = Bucket.fromBucketAttributes(scope, "UsEast1Bucket", BucketAttributes.builder()
         .bucketArn(sharedXRegionUsWest1BucketArn)
         .encryptionKey(Key.fromKeyArn(scope, "UsEast1BucketKeyArn", sharedXRegionUsWest1BucketArn))
         .build());
 
 IBucket usWest2Bucket = Bucket.fromBucketAttributes(scope, "UsWest2Bucket", BucketAttributes.builder()
         .bucketArn(sharedXRegionUsWest2BucketArn)
         .encryptionKey(Key.fromKeyArn(scope, "UsWest2BucketKeyArn", sharedXRegionUsWest2KeyArn))
         .build());
 
 Map<String, IBucket> crossRegionReplicationBuckets = Map.of(
         "us-west-1", usWest1Bucket,
         "us-west-2", usWest2Bucket);
 
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         .synth(ShellStep.Builder.create("Synth")
                 .input(CodePipelineSource.connection("my-org/my-app", "main", ConnectionSourceOptions.builder()
                         .connectionArn("arn:aws:codestar-connections:us-east-1:222222222222:connection/7d2469ff-514a-4e4f-9003-5ca4a43cdc41")
                         .build()))
                 .commands(List.of("npm ci", "npm run build", "npx cdk synth"))
                 .build()) // Use shared buckets.
         .crossRegionReplicationBuckets(crossRegionReplicationBuckets)
         .build();

Context Lookups

You might be using CDK constructs that need to look up runtime context, which is information from the target AWS Account and Region the CDK needs to synthesize CloudFormation templates appropriate for that environment. Examples of this kind of context lookups are the number of Availability Zones available to you, a Route53 Hosted Zone ID, or the ID of an AMI in a given region. This information is automatically looked up when you run cdk synth.

By default, a cdk synth performed in a pipeline will not have permissions to perform these lookups, and the lookups will fail. This is by design.

Our recommended way of using lookups is by running cdk synth on the developer workstation and checking in the cdk.context.json file, which contains the results of the context lookups. This will make sure your synthesized infrastructure is consistent and repeatable. If you do not commit cdk.context.json, the results of the lookups may suddenly be different in unexpected ways, and even produce results that cannot be deployed or will cause data loss. To give an account permissions to perform lookups against an environment, without being able to deploy to it and make changes, run cdk bootstrap --trust-for-lookup=<account>.

If you want to use lookups directly from the pipeline, you either need to accept the risk of nondeterminism, or make sure you save and load the cdk.context.json file somewhere between synth runs. Finally, you should give the synth CodeBuild execution role permissions to assume the bootstrapped lookup roles. As an example, doing so would look like this: 

 CodePipeline.Builder.create(this, "Pipeline")
         .synth(CodeBuildStep.Builder.create("Synth")
                 .input(CodePipelineSource.connection("my-org/my-app", "main", ConnectionSourceOptions.builder()
                         .connectionArn("arn:aws:codestar-connections:us-east-1:222222222222:connection/7d2469ff-514a-4e4f-9003-5ca4a43cdc41")
                         .build()))
                 .commands(List.of("...", "npm ci", "npm run build", "npx cdk synth", "..."))
                 .rolePolicyStatements(List.of(
                     PolicyStatement.Builder.create()
                             .actions(List.of("sts:AssumeRole"))
                             .resources(List.of("*"))
                             .conditions(Map.of(
                                     "StringEquals", Map.of(
                                             "iam:ResourceTag/aws-cdk:bootstrap-role", "lookup")))
                             .build()))
                 .build())
         .build();

The above example requires that the target environments have all been bootstrapped with bootstrap stack version 8, released with CDK CLI 1.114.0.

Security Considerations

It's important to stay safe while employing Continuous Delivery. The CDK Pipelines library comes with secure defaults to the best of our ability, but by its very nature the library cannot take care of everything.

We therefore expect you to mind the following:

  • Maintain dependency hygiene and vet 3rd-party software you use. Any software you run on your build machine has the ability to change the infrastructure that gets deployed. Be careful with the software you depend on.
  • Use dependency locking to prevent accidental upgrades! The default CdkSynths that come with CDK Pipelines will expect package-lock.json and yarn.lock to ensure your dependencies are the ones you expect.
  • CDK Pipelines runs on resources created in your own account, and the configuration of those resources is controlled by developers submitting code through the pipeline. Therefore, CDK Pipelines by itself cannot protect against malicious developers trying to bypass compliance checks. If your threat model includes developers writing CDK code, you should have external compliance mechanisms in place like AWS CloudFormation Hooks (preventive) or AWS Config (reactive) that the CloudFormation Execution Role does not have permissions to disable.
  • Credentials to production environments should be short-lived. After bootstrapping and the initial pipeline provisioning, there is no more need for developers to have access to any of the account credentials; all further changes can be deployed through git. Avoid the chances of credentials leaking by not having them in the first place!

Confirm permissions broadening

To keep tabs on the security impact of changes going out through your pipeline, you can insert a security check before any stage deployment. This security check will check if the upcoming deployment would add any new IAM permissions or security group rules, and if so pause the pipeline and require you to confirm the changes.

The security check will appear as two distinct actions in your pipeline: first a CodeBuild project that runs cdk diff on the stage that's about to be deployed, followed by a Manual Approval action that pauses the pipeline. If it so happens that there no new IAM permissions or security group rules will be added by the deployment, the manual approval step is automatically satisfied. The pipeline will look like this: 

 Pipeline
 ├── ...
 ├── MyApplicationStage
 │    ├── MyApplicationSecurityCheck       // Security Diff Action
 │    ├── MyApplicationManualApproval      // Manual Approval Action
 │    ├── Stack.Prepare
 │    └── Stack.Deploy
 └── ...

You can insert the security check by using a ConfirmPermissionsBroadening step: 

 CodePipeline pipeline;
 
 MyApplicationStage stage = new MyApplicationStage(this, "MyApplication");
 pipeline.addStage(stage, AddStageOpts.builder()
         .pre(List.of(
             ConfirmPermissionsBroadening.Builder.create("Check").stage(stage).build()))
         .build());

To get notified when there is a change that needs your manual approval, create an SNS Topic, subscribe your own email address, and pass it in as as the notificationTopic property: 

 CodePipeline pipeline;
 
 Topic topic = new Topic(this, "SecurityChangesTopic");
 topic.addSubscription(new EmailSubscription("test@email.com"));
 
 MyApplicationStage stage = new MyApplicationStage(this, "MyApplication");
 pipeline.addStage(stage, AddStageOpts.builder()
         .pre(List.of(
             ConfirmPermissionsBroadening.Builder.create("Check")
                     .stage(stage)
                     .notificationTopic(topic)
                     .build()))
         .build());

Note: Manual Approvals notifications only apply when an application has security check enabled.

Using a different deployment engine

CDK Pipelines supports multiple deployment engines, but this module vends a construct for only one such engine: AWS CodePipeline. It is also possible to use CDK Pipelines to build pipelines backed by other deployment engines.

Here is a list of CDK Libraries that integrate CDK Pipelines with alternative deployment engines:

Troubleshooting

Here are some common errors you may encounter while using this library.

Pipeline: Internal Failure

If you see the following error during deployment of your pipeline: 

 CREATE_FAILED  | AWS::CodePipeline::Pipeline | Pipeline/Pipeline
 Internal Failure

There's something wrong with your GitHub access token. It might be missing, or not have the right permissions to access the repository you're trying to access.

Key: Policy contains a statement with one or more invalid principals

If you see the following error during deployment of your pipeline: 

 CREATE_FAILED | AWS::KMS::Key | Pipeline/Pipeline/ArtifactsBucketEncryptionKey
 Policy contains a statement with one or more invalid principals.

One of the target (account, region) environments has not been bootstrapped with the new bootstrap stack. Check your target environments and make sure they are all bootstrapped.

Message: no matching base directory path found for cdk.out

If you see this error during the Synth step, it means that CodeBuild is expecting to find a cdk.out directory in the root of your CodeBuild project, but the directory wasn't there. There are two common causes for this:

  • cdk synth is not being executed: cdk synth used to be run implicitly for you, but you now have to explicitly include the command. For NPM-based projects, add npx cdk synth to the end of the commands property, for other languages add npm install -g aws-cdk and cdk synth.
  • Your CDK project lives in a subdirectory: you added a cd <somedirectory> command to the list of commands; don't forget to tell the ScriptStep about the different location of cdk.out, by passing primaryOutputDirectory: '<somedirectory>/cdk.out'.

is in ROLLBACK_COMPLETE state and can not be updated

If you see the following error during execution of your pipeline: 

 Stack ... is in ROLLBACK_COMPLETE state and can not be updated. (Service:
 AmazonCloudFormation; Status Code: 400; Error Code: ValidationError; Request
 ID: ...)

The stack failed its previous deployment, and is in a non-retryable state. Go into the CloudFormation console, delete the stack, and retry the deployment.

Cannot find module 'xxxx' or its corresponding type declarations

You may see this if you are using TypeScript or other NPM-based languages, when using NPM 7 on your workstation (where you generate package-lock.json) and NPM 6 on the CodeBuild image used for synthesizing.

It looks like NPM 7 has started writing less information to package-lock.json, leading NPM 6 reading that same file to not install all required packages anymore.

Make sure you are using the same NPM version everywhere, either downgrade your workstation's version or upgrade the CodeBuild version.

Cannot find module '.../check-node-version.js' (MODULE_NOT_FOUND)

The above error may be produced by npx when executing the CDK CLI, or any project that uses the AWS SDK for JavaScript, without the target application having been installed yet. For example, it can be triggered by npx cdk synth if aws-cdk is not in your package.json.

Work around this by either installing the target application using NPM before running npx, or set the environment variable NPM_CONFIG_UNSAFE_PERM=true.

Cannot connect to the Docker daemon at unix:///var/run/docker.sock

If, in the 'Synth' action (inside the 'Build' stage) of your pipeline, you get an error like this: 

 stderr: docker: Cannot connect to the Docker daemon at unix:///var/run/docker.sock. Is the docker daemon running?.
 See 'docker run --help'.

It means that the AWS CodeBuild project for 'Synth' is not configured to run in privileged mode, which prevents Docker builds from happening. This typically happens if you use a CDK construct that bundles asset using tools run via Docker, like aws-lambda-nodejs, aws-lambda-python, aws-lambda-go and others.

Make sure you set the privileged environment variable to true in the synth definition: 

 Artifact sourceArtifact = new Artifact();
 Artifact cloudAssemblyArtifact = new Artifact();
 CdkPipeline pipeline = new CdkPipeline(this, "MyPipeline", new CdkPipelineProps()
         .cloudAssemblyArtifact(cloudAssemblyArtifact)
         .synthAction(SimpleSynthAction.standardNpmSynth(new StandardNpmSynthOptions()
                 .sourceArtifact(sourceArtifact)
                 .cloudAssemblyArtifact(cloudAssemblyArtifact)
                 .environment(BuildEnvironment.builder()
                         .privileged(true)
                         .build())
                 ))
         );

After turning on privilegedMode: true, you will need to do a one-time manual cdk deploy of your pipeline to get it going again (as with a broken 'synth' the pipeline will not be able to self update to the right state).

Not authorized to perform sts:AssumeRole on arn:aws:iam:::role/-lookup-role-*

You may get an error like the following in the Synth step: 

 Could not assume role in target account using current credentials (which are for account 111111111111). User:
 arn:aws:sts::111111111111:assumed-role/PipelineStack-PipelineBuildSynthCdkBuildProje-..../AWSCodeBuild-....
 is not authorized to perform: sts:AssumeRole on resource:
 arn:aws:iam::222222222222:role/cdk-hnb659fds-lookup-role-222222222222-us-east-1.
 Please make sure that this role exists in the account. If it doesn't exist, (re)-bootstrap the environment with
 the right '--trust', using the latest version of the CDK CLI.

This is a sign that the CLI is trying to do Context Lookups during the Synth step, which are failing because it cannot assume the right role. We recommend you don't rely on Context Lookups in the pipeline at all, and commit a file called cdk.context.json with the right lookup values in it to source control.

If you do want to do lookups in the pipeline, the cause is one of the following:

  • The target environment has not been bootstrapped; OR
  • The target environment has been bootstrapped without the right --trust relationship; OR
  • The CodeBuild execution role does not have permissions to call sts:AssumeRole.

See the section called Context Lookups for more information on using this feature.

IAM policies: Cannot exceed quota for PoliciesPerRole / Maximum policy size exceeded

This happens as a result of having a lot of targets in the Pipeline: the IAM policies that get generated enumerate all required roles and grow too large.

Make sure you are on version 2.26.0 or higher, and that your cdk.json contains the following: 

 {
   "context": {
     "aws-cdk-lib/aws-iam:minimizePolicies": true
   }
 }

S3 error: Access Denied

An "S3 Access Denied" error can have two causes:

  • Asset hashes have changed, but self-mutation has been disabled in the pipeline.
  • You have deleted and recreated the bootstrap stack, or changed its qualifier.

Self-mutation step has been removed

Some constructs, such as EKS clusters, generate nested stacks. When CloudFormation tries to deploy those stacks, it may fail with this error: 

 S3 error: Access Denied For more information check http://docs.aws.amazon.com/AmazonS3/latest/API/ErrorResponses.html

This happens because the pipeline is not self-mutating and, as a consequence, the FileAssetX build projects get out-of-sync with the generated templates. To fix this, make sure the selfMutating property is set to true: 

 Artifact cloudAssemblyArtifact = new Artifact();
 CdkPipeline pipeline = new CdkPipeline(this, "MyPipeline", new CdkPipelineProps()
         .selfMutating(true)
         .cloudAssemblyArtifact(cloudAssemblyArtifact)
         );

Bootstrap roles have been renamed or recreated

While attempting to deploy an application stage, the "Prepare" or "Deploy" stage may fail with a cryptic error like:

Action execution failed Access Denied (Service: Amazon S3; Status Code: 403; Error Code: AccessDenied; Request ID: 0123456ABCDEFGH; S3 Extended Request ID: 3hWcrVkhFGxfiMb/rTJO0Bk7Qn95x5ll4gyHiFsX6Pmk/NT+uX9+Z1moEcfkL7H3cjH7sWZfeD0=; Proxy: null)

This generally indicates that the roles necessary to deploy have been deleted (or deleted and re-created); for example, if the bootstrap stack has been deleted and re-created, this scenario will happen. Under the hood, the resources that rely on these roles (e.g., cdk-$qualifier-deploy-role-$account-$region) point to different canonical IDs than the recreated versions of these roles, which causes the errors. There are no simple solutions to this issue, and for that reason we strongly recommend that bootstrap stacks not be deleted and re-created once created.

The most automated way to solve the issue is to introduce a secondary bootstrap stack. By changing the qualifier that the pipeline stack looks for, a change will be detected and the impacted policies and resources will be updated. A hypothetical recovery workflow would look something like this:

  • First, for all impacted environments, create a secondary bootstrap stack:

 $ env CDK_NEW_BOOTSTRAP=1 npx cdk bootstrap \
     --qualifier random1234 \
     --toolkit-stack-name CDKToolkitTemp \
     aws://111111111111/us-east-1

  • Update all impacted stacks in the pipeline to use this new qualifier. See https://docs.aws.amazon.com/cdk/latest/guide/bootstrapping.html for more info.

 Stack.Builder.create(this, "MyStack")
         // Update this qualifier to match the one used above.
         .synthesizer(DefaultStackSynthesizer.Builder.create()
                 .qualifier("randchars1234")
                 .build())
         .build();

  • Deploy the updated stacks. This will update the stacks to use the roles created in the new bootstrap stack.
  • (Optional) Restore back to the original state:

    • Revert the change made in step #2 above
    • Re-deploy the pipeline to use the original qualifier.
    • Delete the temporary bootstrap stack(s)

Manual Alternative

Alternatively, the errors can be resolved by finding each impacted resource and policy, and correcting the policies by replacing the canonical IDs (e.g., AROAYBRETNYCYV6ZF2R93) with the appropriate ARNs. As an example, the KMS encryption key policy for the artifacts bucket may have a statement that looks like the following: 

 {
   "Effect" : "Allow",
   "Principal" : {
     // "AWS" : "AROAYBRETNYCYV6ZF2R93"  // Indicates this issue; replace this value
     "AWS": "arn:aws:iam::0123456789012:role/cdk-hnb659fds-deploy-role-0123456789012-eu-west-1", // Correct value
   },
   "Action" : [ "kms:Decrypt", "kms:DescribeKey" ],
   "Resource" : "*"
 }

Any resource or policy that references the qualifier (hnb659fds by default) will need to be updated.

This CDK CLI is not compatible with the CDK library used by your application

The CDK CLI version used in your pipeline is too old to read the Cloud Assembly produced by your CDK app.

Most likely this happens in the SelfMutate action, you are passing the cliVersion parameter to control the version of the CDK CLI, and you just updated the CDK framework version that your application uses. You either forgot to change the cliVersion parameter, or changed the cliVersion in the same commit in which you changed the framework version. Because a change to the pipeline settings needs a successful run of the SelfMutate step to be applied, the next iteration of the SelfMutate step still executes with the old CLI version, and that old CLI version is not able to read the cloud assembly produced by the new framework version.

Solution: change the cliVersion first, commit, push and deploy, and only then change the framework version.

We recommend you avoid specifying the cliVersion parameter at all. By default the pipeline will use the latest CLI version, which will support all cloud assembly versions.

Using Drop-in Docker Replacements

By default, the AWS CDK will build and publish Docker image assets using the docker command. However, by specifying the CDK_DOCKER environment variable, you can override the command that will be used to build and publish your assets.

In CDK Pipelines, the drop-in replacement for the docker command must be included in the CodeBuild environment and configured for your pipeline.

Adding to the default CodeBuild image

You can add a drop-in Docker replacement command to the default CodeBuild environment by adding install-phase commands that encode how to install your tooling and by adding the CDK_DOCKER environment variable to your build environment. 

 IFileSetProducer source; // the repository source
 String[] synthCommands; // Commands to synthesize your app
 String[] installCommands;
 // Commands to install your toolchain
 
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         // Standard CodePipeline properties...
         .synth(ShellStep.Builder.create("Synth")
                 .input(source)
                 .commands(synthCommands)
                 .build())
 
         // Configure CodeBuild to use a drop-in Docker replacement.
         .codeBuildDefaults(CodeBuildOptions.builder()
                 .partialBuildSpec(BuildSpec.fromObject(Map.of(
                         "phases", Map.of(
                                 "install", Map.of(
                                         // Add the shell commands to install your drop-in Docker
                                         // replacement to the CodeBuild enviromment.
                                         "commands", installCommands)))))
                 .buildEnvironment(BuildEnvironment.builder()
                         .environmentVariables(Map.of(
                                 // Instruct the AWS CDK to use `drop-in-replacement` instead of
                                 // `docker` when building / publishing docker images.
                                 // e.g., `drop-in-replacement build . -f path/to/Dockerfile`
                                 "CDK_DOCKER", BuildEnvironmentVariable.builder().value("drop-in-replacement").build()))
                         .build())
                 .build())
         .build();

Using a custom build image

If you're using a custom build image in CodeBuild, you can override the command the AWS CDK uses to build Docker images by providing CDK_DOCKER as an ENV in your Dockerfile or by providing the environment variable in the pipeline as shown below. 

 IFileSetProducer source; // the repository source
 String[] synthCommands;
 // Commands to synthesize your app
 
 CodePipeline pipeline = CodePipeline.Builder.create(this, "Pipeline")
         // Standard CodePipeline properties...
         .synth(ShellStep.Builder.create("Synth")
                 .input(source)
                 .commands(synthCommands)
                 .build())
 
         // Configure CodeBuild to use a drop-in Docker replacement.
         .codeBuildDefaults(CodeBuildOptions.builder()
                 .buildEnvironment(BuildEnvironment.builder()
                         // Provide a custom build image containing your toolchain and the
                         // pre-installed replacement for the `docker` command.
                         .buildImage(LinuxBuildImage.fromDockerRegistry("your-docker-registry"))
                         .environmentVariables(Map.of(
                                 // If you haven't provided an `ENV` in your Dockerfile that overrides
                                 // `CDK_DOCKER`, then you must provide the name of the command that
                                 // the AWS CDK should run instead of `docker` here.
                                 "CDK_DOCKER", BuildEnvironmentVariable.builder().value("drop-in-replacement").build()))
                         .build())
                 .build())
         .build();

Known Issues

There are some usability issues that are caused by underlying technology, and cannot be remedied by CDK at this point. They are reproduced here for completeness.

  • Console links to other accounts will not work: the AWS CodePipeline console will assume all links are relative to the current account. You will not be able to use the pipeline console to click through to a CloudFormation stack in a different account.
  • If a change set failed to apply the pipeline must be restarted: if a change set failed to apply, it cannot be retried. The pipeline must be restarted from the top by clicking Release Change.
  • A stack that failed to create must be deleted manually: if a stack failed to create on the first attempt, you must delete it using the CloudFormation console before starting the pipeline again by clicking Release Change.