Application

Bases: Resource

(experimental) The L2 construct for Flink Kinesis Data Applications.

Stability:

experimental

Resource:

AWS::KinesisAnalyticsV2::Application

ExampleMetadata:

infused

Example:

# bucket: s3.Bucket

flink_app = flink.Application(self, "Application",
    property_groups={
        "FlinkApplicationProperties": {
            "input_stream_name": "my-input-kinesis-stream",
            "output_stream_name": "my-output-kinesis-stream"
        }
    },
    # ...
    runtime=flink.Runtime.FLINK_1_20,
    code=flink.ApplicationCode.from_bucket(bucket, "my-app.jar")
)
Parameters:

  • scope (Construct) –

  • id (str) –

  • code (ApplicationCode) – (experimental) The Flink code asset to run.

  • runtime (Runtime) – (experimental) The Flink version to use for this application.

  • application_name (Optional[str]) – (experimental) A name for your Application that is unique to an AWS account. Default: - CloudFormation-generated name

  • auto_scaling_enabled (Optional[bool]) – (experimental) Whether the Kinesis Data Analytics service can increase the parallelism of the application in response to resource usage. Default: true

  • checkpointing_enabled (Optional[bool]) – (experimental) Whether checkpointing is enabled while your application runs. Default: true

  • checkpoint_interval (Optional[Duration]) – (experimental) The interval between checkpoints. Default: - 1 minute

  • log_group (Optional[ILogGroup]) – (experimental) The log group to send log entries to. Default: - CDK’s default LogGroup

  • log_level (Optional[LogLevel]) – (experimental) The level of log verbosity from the Flink application. Default: FlinkLogLevel.INFO

  • metrics_level (Optional[MetricsLevel]) – (experimental) Describes the granularity of the CloudWatch metrics for an application. Use caution with Parallelism level metrics. Parallelism granularity logs metrics for each parallel thread and can quickly become expensive when parallelism is high (e.g. > 64). Default: MetricsLevel.APPLICATION

  • min_pause_between_checkpoints (Optional[Duration]) – (experimental) The minimum amount of time in to wait after a checkpoint finishes to start a new checkpoint. Default: - 5 seconds

  • parallelism (Union[int, float, None]) – (experimental) The initial parallelism for the application. Kinesis Data Analytics can stop the app, increase the parallelism, and start the app again if autoScalingEnabled is true (the default value). Default: 1

  • parallelism_per_kpu (Union[int, float, None]) – (experimental) The Flink parallelism allowed per Kinesis Processing Unit (KPU). Default: 1

  • property_groups (Optional[Mapping[str, Mapping[str, str]]]) – (experimental) Configuration PropertyGroups. You can use these property groups to pass arbitrary runtime configuration values to your Flink app. Default: - No property group configuration provided to the Flink app

  • removal_policy (Optional[RemovalPolicy]) – (experimental) Provide a RemovalPolicy to override the default. Default: RemovalPolicy.DESTROY

  • role (Optional[IRole]) – (experimental) A role to use to grant permissions to your application. Prefer omitting this property and using the default role. Default: - a new Role will be created

  • security_groups (Optional[Sequence[ISecurityGroup]]) – (experimental) Security groups to use with a provided VPC. Default: - a new security group is created for this application.

  • snapshots_enabled (Optional[bool]) – (experimental) Determines if Flink snapshots are enabled. Default: true

  • vpc (Optional[IVpc]) – (experimental) Deploy the Flink application in a VPC. Default: - no VPC

  • vpc_subnets (Union[SubnetSelection, Dict[str, Any], None]) – (experimental) Choose which VPC subnets to use. Default: - SubnetType.PRIVATE_WITH_EGRESS subnets

Stability:

experimental

Methods

(experimental) Implement the convenience IApplication.addToPrincipalPolicy method.

Parameters:

policy_statement (PolicyStatement) –

Stability:

experimental

Return type:

bool

Apply the given removal policy to this resource.

The Removal Policy controls what happens to this resource when it stops being managed by CloudFormation, either because you’ve removed it from the CDK application or because you’ve made a change that requires the resource to be replaced.

The resource can be deleted (RemovalPolicy.DESTROY), or left in your AWS account for data recovery and cleanup later (RemovalPolicy.RETAIN).

Parameters:

policy (RemovalPolicy) –

Return type:

None

(experimental) Return a CloudWatch metric associated with this Flink application.

Parameters:

  • metric_name (str) – The name of the metric.

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) – Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Stability:

experimental

Return type:

Metric

(experimental) The time (in milliseconds) this task or operator is back pressured per second.

Units: Milliseconds

Reporting Level: Operator, Task, Parallelism

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The time (in milliseconds) this task or operator is busy (neither idle nor back pressured) per second.

Can be NaN, if the value could not be calculated.

Units: Milliseconds

Reporting Level: Operator, Task, Parallelism

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The overall percentage of CPU utilization across task managers.

For example, if there are five task managers, Kinesis Data Analytics publishes five samples of this metric per reporting interval.

Units: Percentage

Reporting Level: Application

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The last watermark this application/operator/task/thread has received.

Units: Milliseconds

Reporting Level: Application, Operator, Task, Parallelism

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • maximum over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The last watermark this application/operator/task/thread has received.

Units: Milliseconds

Reporting Level: Application, Operator, Task, Parallelism

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • maximum over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The time elapsed during an outage for failing/recovering jobs.

Units: Milliseconds

Reporting Level: Application

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The total number of times this job has fully restarted since it was submitted.

This metric does not measure fine-grained restarts.

Units: Count

Reporting Level: Application

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • sum over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) Overall heap memory utilization across task managers.

For example, if there are five task managers, Kinesis Data Analytics publishes five samples of this metric per reporting interval.

Units: Percentage

Reporting Level: Application

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The time (in milliseconds) this task or operator is idle (has no data to process) per second.

Idle time excludes back pressured time, so if the task is back pressured it is not idle.

Units: Milliseconds

Reporting Level: Operator, Task, Parallelism

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The number of Kinesis Processing Units that are used to run your stream processing application.

The average number of KPUs used each hour determines the billing for your application.

Units: Count

Reporting Level: Application

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The time it took to complete the last checkpoint.

Units: Milliseconds

Reporting Level: Application

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • maximum over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The total size of the last checkpoint.

Units: Bytes

Reporting Level: Application

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • maximum over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The total amount of managed memory.

Units: Bytes

Reporting Level: Application, Operator, Task, Parallelism

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The amount of managed memory currently used.

Units: Bytes

Reporting Level: Application, Operator, Task, Parallelism

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) Derived from managedMemoryUsed/managedMemoryTotal.

Units: Percentage

Reporting Level: Application, Operator, Task, Parallelism

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The number of records this operator or task has dropped due to arriving late.

Units: Count

Reporting Level: Application, Operator, Task, Parallelism

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • sum over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The total number of records this application, operator, or task has received.

Units: Count

Reporting Level: Application, Operator, Task, Parallelism

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The total number of records this application, operator or task has received per second.

Units: Count/Second

Reporting Level: Application, Operator, Task, Parallelism

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The total number of records this application, operator or task has emitted.

Units: Count

Reporting Level: Application, Operator, Task, Parallelism

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The total number of records this application, operator or task has emitted per second.

Units: Count/Second

Reporting Level: Application, Operator, Task, Parallelism

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The number of times checkpointing has failed.

Units: Count

Reporting Level: Application

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • sum over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The total number of old garbage collection operations that have occurred across all task managers.

Units: Count

Reporting Level: Application

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • sum over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The total time spent performing old garbage collection operations.

Units: Milliseconds

Reporting Level: Application

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • sum over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The total number of live threads used by the application.

Units: Count

Reporting Level: Application

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

(experimental) The time that the job has been running without interruption.

Units: Milliseconds

Reporting Level: Application

Parameters:

  • account (Optional[str]) – Account which this metric comes from. Default: - Deployment account.

  • color (Optional[str]) – The hex color code, prefixed with ‘#’ (e.g. ‘#00ff00’), to use when this metric is rendered on a graph. The Color class has a set of standard colors that can be used here. Default: - Automatic color

  • dimensions_map (Optional[Mapping[str, str]]) – Dimensions of the metric. Default: - No dimensions.

  • label (Optional[str]) –

    Label for this metric when added to a Graph in a Dashboard. You can use dynamic labels to show summary information about the entire displayed time series in the legend. For example, if you use:: [max: ${MAX}] MyMetric As the metric label, the maximum value in the visible range will be shown next to the time series name in the graph’s legend. Default: - No label

  • period (Optional[Duration]) – The period over which the specified statistic is applied. Default: Duration.minutes(5)

  • region (Optional[str]) – Region which this metric comes from. Default: - Deployment region.

  • statistic (Optional[str]) – What function to use for aggregating. Use the aws_cloudwatch.Stats helper class to construct valid input strings. Can be one of the following: - “Minimum” | “min” - “Maximum” | “max” - “Average” | “avg” - “Sum” | “sum” - “SampleCount | “n” - “pNN.NN” - “tmNN.NN” | “tm(NN.NN%:NN.NN%)” - “iqm” - “wmNN.NN” | “wm(NN.NN%:NN.NN%)” - “tcNN.NN” | “tc(NN.NN%:NN.NN%)” - “tsNN.NN” | “ts(NN.NN%:NN.NN%)” Default: Average

  • unit (Optional[Unit]) – Unit used to filter the metric stream. Only refer to datums emitted to the metric stream with the given unit and ignore all others. Only useful when datums are being emitted to the same metric stream under different units. The default is to use all matric datums in the stream, regardless of unit, which is recommended in nearly all cases. CloudWatch does not honor this property for graphs. Default: - All metric datums in the given metric stream

Default:

  • average over 5 minutes

Stability:

experimental

Return type:

Metric

Returns a string representation of this construct.

Return type:

str

Attributes

(experimental) The application ARN.

Stability:

experimental

(experimental) The name of the Flink application.

Stability:

experimental

(experimental) The network connections associated with this resource.

Stability:

experimental

The environment this resource belongs to.

For resources that are created and managed by the CDK (generally, those created by creating new class instances like Role, Bucket, etc.), this is always the same as the environment of the stack they belong to; however, for imported resources (those obtained from static methods like fromRoleArn, fromBucketName, etc.), that might be different than the stack they were imported into.

(experimental) The principal to grant permissions to.

Stability:

experimental

The tree node.

(experimental) The application IAM role.

Stability:

experimental

The stack in which this resource is defined.

Static Methods

(experimental) Import an existing application defined outside of CDK code by applicationArn.

Parameters:

  • scope (Construct) –

  • id (str) –

  • application_arn (str) –

Stability:

experimental

Return type:

IApplication

(experimental) Import an existing application defined outside of CDK code.

Parameters:

  • scope (Construct) –

  • id (str) –

  • application_arn (str) – (experimental) The ARN of the Flink application. Format: arn::kinesisanalytics:::application/

  • security_groups (Optional[Sequence[ISecurityGroup]]) – (experimental) The security groups for this Flink application if deployed in a VPC. Default: - no security groups

Stability:

experimental

Return type:

IApplication

(experimental) Import an existing Flink application defined outside of CDK code by applicationName.

Parameters:

  • scope (Construct) –

  • id (str) –

  • application_name (str) –

Stability:

experimental

Return type:

IApplication

Checks if x is a construct.

Use this method instead of instanceof to properly detect Construct instances, even when the construct library is symlinked.

Explanation: in JavaScript, multiple copies of the constructs library on disk are seen as independent, completely different libraries. As a consequence, the class Construct in each copy of the constructs library is seen as a different class, and an instance of one class will not test as instanceof the other class. npm install will not create installations like this, but users may manually symlink construct libraries together or use a monorepo tool: in those cases, multiple copies of the constructs library can be accidentally installed, and instanceof will behave unpredictably. It is safest to avoid using instanceof, and using this type-testing method instead.

Parameters:

x (Any) – Any object.

Return type:

bool

Returns:

true if x is an object created from a class which extends Construct.

Returns true if the construct was created by CDK, and false otherwise.

Parameters:

construct (IConstruct) –

Return type:

bool

Check whether the given construct is a Resource.

Parameters:

construct (IConstruct) –

Return type:

bool