AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.
[ aws . groundstation ]
Returns Config
information.
Only one Config
response can be returned.
See also: AWS API Documentation
get-config
--config-id <value>
--config-type <value>
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]
--config-id
(string)
UUID of aConfig
.
--config-type
(string)
Type of a
Config
.Possible values:
antenna-downlink
antenna-downlink-demod-decode
antenna-uplink
dataflow-endpoint
tracking
uplink-echo
s3-recording
--cli-input-json
(string)
Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton
. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.
--generate-cli-skeleton
(string)
Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input
, prints a sample input JSON that can be used as an argument for --cli-input-json
. If provided with the value output
, it validates the command inputs and returns a sample output JSON for that command.
--debug
(boolean)
Turn on debug logging.
--endpoint-url
(string)
Override command's default URL with the given URL.
--no-verify-ssl
(boolean)
By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.
--no-paginate
(boolean)
Disable automatic pagination. If automatic pagination is disabled, the AWS CLI will only make one call, for the first page of results.
--output
(string)
The formatting style for command output.
--query
(string)
A JMESPath query to use in filtering the response data.
--profile
(string)
Use a specific profile from your credential file.
--region
(string)
The region to use. Overrides config/env settings.
--version
(string)
Display the version of this tool.
--color
(string)
Turn on/off color output.
--no-sign-request
(boolean)
Do not sign requests. Credentials will not be loaded if this argument is provided.
--ca-bundle
(string)
The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.
--cli-read-timeout
(int)
The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.
--cli-connect-timeout
(int)
The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.
configArn -> (string)
ARN of aConfig
configData -> (tagged union structure)
Data elements in a
Config
.Note
This is a Tagged Union structure. Only one of the following top level keys can be set:antennaDownlinkConfig
,antennaDownlinkDemodDecodeConfig
,antennaUplinkConfig
,dataflowEndpointConfig
,s3RecordingConfig
,trackingConfig
,uplinkEchoConfig
.antennaDownlinkConfig -> (structure)
Information about how AWS Ground Station should configure an antenna for downlink during a contact.
spectrumConfig -> (structure)
Object that describes a spectral
Config
.bandwidth -> (structure)
Bandwidth of a spectral
Config
. AWS Ground Station currently has the following bandwidth limitations:
- For
AntennaDownlinkDemodDecodeconfig
, valid values are between 125 kHz to 650 MHz.- For
AntennaDownlinkconfig
valid values are between 10 kHz to 54 MHz.- For
AntennaUplinkConfig
, valid values are between 10 kHz to 54 MHz.units -> (string)
Frequency bandwidth units.value -> (double)
Frequency bandwidth value. AWS Ground Station currently has the following bandwidth limitations:
- For
AntennaDownlinkDemodDecodeconfig
, valid values are between 125 kHz to 650 MHz.- For
AntennaDownlinkconfig
, valid values are between 10 kHz to 54 MHz.- For
AntennaUplinkConfig
, valid values are between 10 kHz to 54 MHz.centerFrequency -> (structure)
Center frequency of a spectral
Config
. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.units -> (string)
Frequency units.value -> (double)
Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.polarization -> (string)
Polarization of a spectralConfig
. Capturing both"RIGHT_HAND"
and"LEFT_HAND"
polarization requires two separate configs.antennaDownlinkDemodDecodeConfig -> (structure)
Information about how AWS Ground Station should configure an antenna for downlink demod decode during a contact.
decodeConfig -> (structure)
Information about the decode
Config
.unvalidatedJSON -> (string)
Unvalidated JSON of a decodeConfig
.demodulationConfig -> (structure)
Information about the demodulation
Config
.unvalidatedJSON -> (string)
Unvalidated JSON of a demodulationConfig
.spectrumConfig -> (structure)
Information about the spectral
Config
.bandwidth -> (structure)
Bandwidth of a spectral
Config
. AWS Ground Station currently has the following bandwidth limitations:
- For
AntennaDownlinkDemodDecodeconfig
, valid values are between 125 kHz to 650 MHz.- For
AntennaDownlinkconfig
valid values are between 10 kHz to 54 MHz.- For
AntennaUplinkConfig
, valid values are between 10 kHz to 54 MHz.units -> (string)
Frequency bandwidth units.value -> (double)
Frequency bandwidth value. AWS Ground Station currently has the following bandwidth limitations:
- For
AntennaDownlinkDemodDecodeconfig
, valid values are between 125 kHz to 650 MHz.- For
AntennaDownlinkconfig
, valid values are between 10 kHz to 54 MHz.- For
AntennaUplinkConfig
, valid values are between 10 kHz to 54 MHz.centerFrequency -> (structure)
Center frequency of a spectral
Config
. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.units -> (string)
Frequency units.value -> (double)
Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.polarization -> (string)
Polarization of a spectralConfig
. Capturing both"RIGHT_HAND"
and"LEFT_HAND"
polarization requires two separate configs.antennaUplinkConfig -> (structure)
Information about how AWS Ground Station should configure an antenna for uplink during a contact.
spectrumConfig -> (structure)
Information about the uplink spectral
Config
.centerFrequency -> (structure)
Center frequency of an uplink spectral
Config
. Valid values are between 2025 to 2120 MHz.units -> (string)
Frequency units.value -> (double)
Frequency value. Valid values are between 2200 to 2300 MHz and 7750 to 8400 MHz for downlink and 2025 to 2120 MHz for uplink.polarization -> (string)
Polarization of an uplink spectralConfig
. Capturing both"RIGHT_HAND"
and"LEFT_HAND"
polarization requires two separate configs.targetEirp -> (structure)
EIRP of the target.
units -> (string)
Units of an EIRP.value -> (double)
Value of an EIRP. Valid values are between 20.0 to 50.0 dBW.transmitDisabled -> (boolean)
Whether or not uplink transmit is disabled.dataflowEndpointConfig -> (structure)
Information about the dataflow endpoint
Config
.dataflowEndpointName -> (string)
Name of a dataflow endpoint.dataflowEndpointRegion -> (string)
Region of a dataflow endpoint.s3RecordingConfig -> (structure)
Information about an S3 recording
Config
.bucketArn -> (string)
ARN of the bucket to record to.prefix -> (string)
S3 Key prefix to prefice data files.roleArn -> (string)
ARN of the role Ground Station assumes to write data to the bucket.trackingConfig -> (structure)
Object that determines whether tracking should be used during a contact executed with this
Config
in the mission profile.autotrack -> (string)
Current setting for autotrack.uplinkEchoConfig -> (structure)
Information about an uplink echo
Config
.Parameters from the
AntennaUplinkConfig
, corresponding to the specifiedAntennaUplinkConfigArn
, are used when thisUplinkEchoConfig
is used in a contact.antennaUplinkConfigArn -> (string)
ARN of an uplinkConfig
.enabled -> (boolean)
Whether or not an uplinkConfig
is enabled.
configId -> (string)
UUID of aConfig
.
configType -> (string)
Type of aConfig
.
name -> (string)
Name of aConfig
.
tags -> (map)
Tags assigned to a
Config
.key -> (string)
value -> (string)