**Note:**
You are viewing the documentation for an older major version of the AWS CLI (version 1).

AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.

Returns information about health metrics for your Lightsail load balancer.

See also: AWS API Documentation

See *'aws help'* for descriptions of global parameters.

```
get-load-balancer-metric-data
--load-balancer-name <value>
--metric-name <value>
--period <value>
--start-time <value>
--end-time <value>
--unit <value>
--statistics <value>
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]
```

`--load-balancer-name` (string)

The name of the load balancer.

`--metric-name` (string)

The metric for which you want to return information.

Valid load balancer metric names are listed below, along with the most useful

statisticsto include in your request, and the publishedunitvalue.

- **
ClientTLSNegotiationErrorCount** - The number of TLS connections initiated by the client that did not establish a session with the load balancer due to a TLS error generated by the load balancer. Possible causes include a mismatch of ciphers or protocols.Statistics: The most useful statistic isSum.Unit: The published unit isCount.- **
HealthyHostCount** - The number of target instances that are considered healthy.Statistics: The most useful statistic areAverage,Minimum, andMaximum.Unit: The published unit isCount.- **
HTTPCode_Instance_2XX_Count** - The number of HTTP 2XX response codes generated by the target instances. This does not include any response codes generated by the load balancer.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1.Unit: The published unit isCount.- **
HTTPCode_Instance_3XX_Count** - The number of HTTP 3XX response codes generated by the target instances. This does not include any response codes generated by the load balancer.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1.Unit: The published unit isCount.- **
HTTPCode_Instance_4XX_Count** - The number of HTTP 4XX response codes generated by the target instances. This does not include any response codes generated by the load balancer.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1.Unit: The published unit isCount.- **
HTTPCode_Instance_5XX_Count** - The number of HTTP 5XX response codes generated by the target instances. This does not include any response codes generated by the load balancer.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1.Unit: The published unit isCount.- **
HTTPCode_LB_4XX_Count** - The number of HTTP 4XX client error codes that originated from the load balancer. Client errors are generated when requests are malformed or incomplete. These requests were not received by the target instance. This count does not include response codes generated by the target instances.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1.Unit: The published unit isCount.- **
HTTPCode_LB_5XX_Count** - The number of HTTP 5XX server error codes that originated from the load balancer. This does not include any response codes generated by the target instance. This metric is reported if there are no healthy instances attached to the load balancer, or if the request rate exceeds the capacity of the instances (spillover) or the load balancer.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1.Unit: The published unit isCount.- **
InstanceResponseTime** - The time elapsed, in seconds, after the request leaves the load balancer until a response from the target instance is received.Statistics: The most useful statistic isAverage.Unit: The published unit isSeconds.- **
RejectedConnectionCount** - The number of connections that were rejected because the load balancer had reached its maximum number of connections.Statistics: The most useful statistic isSum.Unit: The published unit isCount.- **
RequestCount** - The number of requests processed over IPv4. This count includes only the requests with a response generated by a target instance of the load balancer.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1.Unit: The published unit isCount.- **
UnhealthyHostCount** - The number of target instances that are considered unhealthy.Statistics: The most useful statistic areAverage,Minimum, andMaximum.Unit: The published unit isCount.Possible values:

ClientTLSNegotiationErrorCountHealthyHostCountUnhealthyHostCountHTTPCode_LB_4XX_CountHTTPCode_LB_5XX_CountHTTPCode_Instance_2XX_CountHTTPCode_Instance_3XX_CountHTTPCode_Instance_4XX_CountHTTPCode_Instance_5XX_CountInstanceResponseTimeRejectedConnectionCountRequestCount

`--period` (integer)

The granularity, in seconds, of the returned data points.

`--start-time` (timestamp)

The start time of the period.

`--end-time` (timestamp)

The end time of the period.

`--unit` (string)

The unit for the metric data request. Valid units depend on the metric data being required. For the valid units with each available metric, see the

metricNameparameter.Possible values:

SecondsMicrosecondsMillisecondsBytesKilobytesMegabytesGigabytesTerabytesBitsKilobitsMegabitsGigabitsTerabitsPercentCountBytes/SecondKilobytes/SecondMegabytes/SecondGigabytes/SecondTerabytes/SecondBits/SecondKilobits/SecondMegabits/SecondGigabits/SecondTerabits/SecondCount/SecondNone

`--statistics` (list)

The statistic for the metric.

The following statistics are available:

Minimum- The lowest value observed during the specified period. Use this value to determine low volumes of activity for your application.Maximum- The highest value observed during the specified period. Use this value to determine high volumes of activity for your application.Sum- All values submitted for the matching metric added together. You can use this statistic to determine the total volume of a metric.Average- The value of Sum / SampleCount during the specified period. By comparing this statistic with the Minimum and Maximum values, you can determine the full scope of a metric and how close the average use is to the Minimum and Maximum values. This comparison helps you to know when to increase or decrease your resources.SampleCount- The count, or number, of data points used for the statistical calculation.

Syntax:

```
"string" "string" ...
Where valid values are:
Minimum
Maximum
Sum
Average
SampleCount
```

`--cli-input-json` (string)
Performs service operation based on the JSON string provided. The JSON string follows the format provided by `--generate-cli-skeleton`. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.

`--generate-cli-skeleton` (string)
Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value `input`, prints a sample input JSON that can be used as an argument for `--cli-input-json`. If provided with the value `output`, it validates the command inputs and returns a sample output JSON for that command.

See *'aws help'* for descriptions of global parameters.

metricName -> (string)

The metric about which you are receiving information. Valid values are listed below, along with the most useful

statisticsto include in your request.

- **
ClientTLSNegotiationErrorCount** - The number of TLS connections initiated by the client that did not establish a session with the load balancer. Possible causes include a mismatch of ciphers or protocols.Statistics: The most useful statistic isSum.- **
HealthyHostCount** - The number of target instances that are considered healthy.Statistics: The most useful statistic areAverage,Minimum, andMaximum.- **
UnhealthyHostCount** - The number of target instances that are considered unhealthy.Statistics: The most useful statistic areAverage,Minimum, andMaximum.- **
HTTPCode_LB_4XX_Count** - The number of HTTP 4XX client error codes that originate from the load balancer. Client errors are generated when requests are malformed or incomplete. These requests have not been received by the target instance. This count does not include any response codes generated by the target instances.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1.- **
HTTPCode_LB_5XX_Count** - The number of HTTP 5XX server error codes that originate from the load balancer. This count does not include any response codes generated by the target instances.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1. Note thatMinimum,Maximum, andAverageall return1.- **
HTTPCode_Instance_2XX_Count** - The number of HTTP response codes generated by the target instances. This does not include any response codes generated by the load balancer.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1.- **
HTTPCode_Instance_3XX_Count** - The number of HTTP response codes generated by the target instances. This does not include any response codes generated by the load balancer.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1.- **
HTTPCode_Instance_4XX_Count** - The number of HTTP response codes generated by the target instances. This does not include any response codes generated by the load balancer.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1.- **
HTTPCode_Instance_5XX_Count** - The number of HTTP response codes generated by the target instances. This does not include any response codes generated by the load balancer.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1.- **
InstanceResponseTime** - The time elapsed, in seconds, after the request leaves the load balancer until a response from the target instance is received.Statistics: The most useful statistic isAverage.- **
RejectedConnectionCount** - The number of connections that were rejected because the load balancer had reached its maximum number of connections.Statistics: The most useful statistic isSum.- **
RequestCount** - The number of requests processed over IPv4. This count includes only the requests with a response generated by a target instance of the load balancer.Statistics: The most useful statistic isSum. Note thatMinimum,Maximum, andAverageall return1.

metricData -> (list)

An array of metric datapoint objects.

(structure)

Describes the metric data point.

average -> (double)

The average.maximum -> (double)

The maximum.minimum -> (double)

The minimum.sampleCount -> (double)

The sample count.sum -> (double)

The sum.timestamp -> (timestamp)

The timestamp (e.g.,1479816991.349).unit -> (string)

The unit.