Table Of Contents

Feedback

User Guide

First time using the AWS CLI? See the User Guide for help getting started.

Note: You are viewing the documentation for an older major version of the AWS CLI (version 1).

AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.

[ aws . sesv2 ]

send-bulk-email

Description

Composes an email message to multiple destinations.

See also: AWS API Documentation

See 'aws help' for descriptions of global parameters.

Synopsis

  send-bulk-email
[--from-email-address <value>]
[--from-email-address-identity-arn <value>]
[--reply-to-addresses <value>]
[--feedback-forwarding-email-address <value>]
[--feedback-forwarding-email-address-identity-arn <value>]
[--default-email-tags <value>]
--default-content <value>
--bulk-email-entries <value>
[--configuration-set-name <value>]
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]

Options

--from-email-address (string)

The email address that you want to use as the "From" address for the email. The address that you specify has to be verified.

--from-email-address-identity-arn (string)

This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the FromEmailAddress parameter.

For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use sender@example.com, then you would specify the FromEmailAddressIdentityArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the FromEmailAddress to be sender@example.com.

For more information about sending authorization, see the Amazon SES Developer Guide .

--reply-to-addresses (list)

The "Reply-to" email addresses for the message. When the recipient replies to the message, each Reply-to address receives the reply.

(string)

Syntax:

"string" "string" ...

--feedback-forwarding-email-address (string)

The address that you want bounce and complaint notifications to be sent to.

--feedback-forwarding-email-address-identity-arn (string)

This parameter is used only for sending authorization. It is the ARN of the identity that is associated with the sending authorization policy that permits you to use the email address specified in the FeedbackForwardingEmailAddress parameter.

For example, if the owner of example.com (which has ARN arn:aws:ses:us-east-1:123456789012:identity/example.com) attaches a policy to it that authorizes you to use feedback@example.com, then you would specify the FeedbackForwardingEmailAddressIdentityArn to be arn:aws:ses:us-east-1:123456789012:identity/example.com, and the FeedbackForwardingEmailAddress to be feedback@example.com.

For more information about sending authorization, see the Amazon SES Developer Guide .

--default-email-tags (list)

A list of tags, in the form of name/value pairs, to apply to an email that you send using the SendEmail operation. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.

(structure)

Contains the name and value of a tag that you apply to an email. You can use message tags when you publish email sending events.

Name -> (string)

The name of the message tag. The message tag name has to meet the following criteria:

  • It can only contain ASCII letters (a–z, A–Z), numbers (0–9), underscores (_), or dashes (-).
  • It can contain no more than 256 characters.

Value -> (string)

The value of the message tag. The message tag value has to meet the following criteria:

  • It can only contain ASCII letters (a–z, A–Z), numbers (0–9), underscores (_), or dashes (-).
  • It can contain no more than 256 characters.

Shorthand Syntax:

Name=string,Value=string ...

JSON Syntax:

[
  {
    "Name": "string",
    "Value": "string"
  }
  ...
]

--default-content (structure)

An object that contains the body of the message. You can specify a template message.

Template -> (structure)

The template to use for the bulk email message.

TemplateName -> (string)

The name of the template. You will refer to this name when you send email using the SendTemplatedEmail or SendBulkTemplatedEmail operations.

TemplateArn -> (string)

The Amazon Resource Name (ARN) of the template.

TemplateData -> (string)

An object that defines the values to use for message variables in the template. This object is a set of key-value pairs. Each key defines a message variable in the template. The corresponding value defines the value to use for that variable.

Shorthand Syntax:

Template={TemplateName=string,TemplateArn=string,TemplateData=string}

JSON Syntax:

{
  "Template": {
    "TemplateName": "string",
    "TemplateArn": "string",
    "TemplateData": "string"
  }
}

--bulk-email-entries (list)

The list of bulk email entry objects.

(structure)

Destination -> (structure)

Represents the destination of the message, consisting of To:, CC:, and BCC: fields.

Note

Amazon SES does not support the SMTPUTF8 extension, as described in RFC6531 . For this reason, the local part of a destination email address (the part of the email address that precedes the @ sign) may only contain 7-bit ASCII characters . If the domain part of an address (the part after the @ sign) contains non-ASCII characters, they must be encoded using Punycode, as described in RFC3492 .

ToAddresses -> (list)

An array that contains the email addresses of the "To" recipients for the email.

(string)

CcAddresses -> (list)

An array that contains the email addresses of the "CC" (carbon copy) recipients for the email.

(string)

BccAddresses -> (list)

An array that contains the email addresses of the "BCC" (blind carbon copy) recipients for the email.

(string)

ReplacementTags -> (list)

A list of tags, in the form of name/value pairs, to apply to an email that you send using the SendBulkTemplatedEmail operation. Tags correspond to characteristics of the email that you define, so that you can publish email sending events.

(structure)

Contains the name and value of a tag that you apply to an email. You can use message tags when you publish email sending events.

Name -> (string)

The name of the message tag. The message tag name has to meet the following criteria:

  • It can only contain ASCII letters (a–z, A–Z), numbers (0–9), underscores (_), or dashes (-).
  • It can contain no more than 256 characters.

Value -> (string)

The value of the message tag. The message tag value has to meet the following criteria:

  • It can only contain ASCII letters (a–z, A–Z), numbers (0–9), underscores (_), or dashes (-).
  • It can contain no more than 256 characters.

ReplacementEmailContent -> (structure)

The ReplacementEmailContent associated with a BulkEmailEntry .

ReplacementTemplate -> (structure)

The ReplacementTemplate associated with ReplacementEmailContent .

ReplacementTemplateData -> (string)

A list of replacement values to apply to the template. This parameter is a JSON object, typically consisting of key-value pairs in which the keys correspond to replacement tags in the email template.

Shorthand Syntax:

Destination={ToAddresses=[string,string],CcAddresses=[string,string],BccAddresses=[string,string]},ReplacementTags=[{Name=string,Value=string},{Name=string,Value=string}],ReplacementEmailContent={ReplacementTemplate={ReplacementTemplateData=string}} ...

JSON Syntax:

[
  {
    "Destination": {
      "ToAddresses": ["string", ...],
      "CcAddresses": ["string", ...],
      "BccAddresses": ["string", ...]
    },
    "ReplacementTags": [
      {
        "Name": "string",
        "Value": "string"
      }
      ...
    ],
    "ReplacementEmailContent": {
      "ReplacementTemplate": {
        "ReplacementTemplateData": "string"
      }
    }
  }
  ...
]

--configuration-set-name (string)

The name of the configuration set that you want to use when sending the email.

--cli-input-json (string) Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

See 'aws help' for descriptions of global parameters.

Output

BulkEmailEntryResults -> (list)

A list of BulkMailEntry objects.

(structure)

The result of the SendBulkEmail operation of each specified BulkEmailEntry .

Status -> (string)

The status of a message sent using the SendBulkTemplatedEmail operation.

Possible values for this parameter include:

  • SUCCESS: Amazon SES accepted the message, and will attempt to deliver it to the recipients.
  • MESSAGE_REJECTED: The message was rejected because it contained a virus.
  • MAIL_FROM_DOMAIN_NOT_VERIFIED: The sender's email address or domain was not verified.
  • CONFIGURATION_SET_DOES_NOT_EXIST: The configuration set you specified does not exist.
  • TEMPLATE_DOES_NOT_EXIST: The template you specified does not exist.
  • ACCOUNT_SUSPENDED: Your account has been shut down because of issues related to your email sending practices.
  • ACCOUNT_THROTTLED: The number of emails you can send has been reduced because your account has exceeded its allocated sending limit.
  • ACCOUNT_DAILY_QUOTA_EXCEEDED: You have reached or exceeded the maximum number of emails you can send from your account in a 24-hour period.
  • INVALID_SENDING_POOL_NAME: The configuration set you specified refers to an IP pool that does not exist.
  • ACCOUNT_SENDING_PAUSED: Email sending for the Amazon SES account was disabled using the UpdateAccountSendingEnabled operation.
  • CONFIGURATION_SET_SENDING_PAUSED: Email sending for this configuration set was disabled using the UpdateConfigurationSetSendingEnabled operation.
  • INVALID_PARAMETER_VALUE: One or more of the parameters you specified when calling this operation was invalid. See the error message for additional information.
  • TRANSIENT_FAILURE: Amazon SES was unable to process your request because of a temporary issue.
  • FAILED: Amazon SES was unable to process your request. See the error message for additional information.

Error -> (string)

A description of an error that prevented a message being sent using the SendBulkTemplatedEmail operation.

MessageId -> (string)

The unique message identifier returned from the SendBulkTemplatedEmail operation.