@ThreadSafe @Generated(value="com.amazonaws:aws-java-sdk-code-generator") public class AmazonFSxAsyncClient extends AmazonFSxClient implements AmazonFSxAsync
AsyncHandler can be used to receive
notification when an asynchronous operation completes.
Amazon FSx is a fully managed service that makes it easy for storage and application administrators to launch and use shared file storage.
LOGGING_AWS_REQUEST_METRICENDPOINT_PREFIXassociateFileSystemAliases, builder, cancelDataRepositoryTask, copyBackup, createBackup, createDataRepositoryAssociation, createDataRepositoryTask, createFileCache, createFileSystem, createFileSystemFromBackup, createSnapshot, createStorageVirtualMachine, createVolume, createVolumeFromBackup, deleteBackup, deleteDataRepositoryAssociation, deleteFileCache, deleteFileSystem, deleteSnapshot, deleteStorageVirtualMachine, deleteVolume, describeBackups, describeDataRepositoryAssociations, describeDataRepositoryTasks, describeFileCaches, describeFileSystemAliases, describeFileSystems, describeSnapshots, describeStorageVirtualMachines, describeVolumes, disassociateFileSystemAliases, getCachedResponseMetadata, listTagsForResource, releaseFileSystemNfsV3Locks, restoreVolumeFromSnapshot, tagResource, untagResource, updateDataRepositoryAssociation, updateFileCache, updateFileSystem, updateSnapshot, updateStorageVirtualMachine, updateVolumeaddRequestHandler, addRequestHandler, configureRegion, getClientConfiguration, getEndpointPrefix, getMonitoringListeners, getRequestMetricsCollector, getServiceName, getSignerByURI, getSignerOverride, getSignerRegionOverride, getTimeOffset, makeImmutable, removeRequestHandler, removeRequestHandler, setEndpoint, setEndpoint, setRegion, setServiceNameIntern, setSignerRegionOverride, setTimeOffset, withEndpoint, withRegion, withRegion, withTimeOffsetequals, getClass, hashCode, notify, notifyAll, toString, wait, wait, waitassociateFileSystemAliases, cancelDataRepositoryTask, copyBackup, createBackup, createDataRepositoryAssociation, createDataRepositoryTask, createFileCache, createFileSystem, createFileSystemFromBackup, createSnapshot, createStorageVirtualMachine, createVolume, createVolumeFromBackup, deleteBackup, deleteDataRepositoryAssociation, deleteFileCache, deleteFileSystem, deleteSnapshot, deleteStorageVirtualMachine, deleteVolume, describeBackups, describeDataRepositoryAssociations, describeDataRepositoryTasks, describeFileCaches, describeFileSystemAliases, describeFileSystems, describeSnapshots, describeStorageVirtualMachines, describeVolumes, disassociateFileSystemAliases, getCachedResponseMetadata, listTagsForResource, releaseFileSystemNfsV3Locks, restoreVolumeFromSnapshot, tagResource, untagResource, updateDataRepositoryAssociation, updateFileCache, updateFileSystem, updateSnapshot, updateStorageVirtualMachine, updateVolumepublic static AmazonFSxAsyncClientBuilder asyncBuilder()
public ExecutorService getExecutorService()
public Future<AssociateFileSystemAliasesResult> associateFileSystemAliasesAsync(AssociateFileSystemAliasesRequest request)
AmazonFSxAsyncUse this action to associate one or more Domain Name Server (DNS) aliases with an existing Amazon FSx for Windows File Server file system. A file system can have a maximum of 50 DNS aliases associated with it at any one time. If you try to associate a DNS alias that is already associated with the file system, FSx takes no action on that alias in the request. For more information, see Working with DNS Aliases and Walkthrough 5: Using DNS aliases to access your file system, including additional steps you must take to be able to access your file system using a DNS alias.
The system response shows the DNS aliases that Amazon FSx is attempting to associate with the file system. Use the API operation to monitor the status of the aliases Amazon FSx is associating with the file system.
associateFileSystemAliasesAsync in interface AmazonFSxAsyncrequest - The request object specifying one or more DNS alias names to associate with an Amazon FSx for Windows File
Server file system.public Future<AssociateFileSystemAliasesResult> associateFileSystemAliasesAsync(AssociateFileSystemAliasesRequest request, AsyncHandler<AssociateFileSystemAliasesRequest,AssociateFileSystemAliasesResult> asyncHandler)
AmazonFSxAsyncUse this action to associate one or more Domain Name Server (DNS) aliases with an existing Amazon FSx for Windows File Server file system. A file system can have a maximum of 50 DNS aliases associated with it at any one time. If you try to associate a DNS alias that is already associated with the file system, FSx takes no action on that alias in the request. For more information, see Working with DNS Aliases and Walkthrough 5: Using DNS aliases to access your file system, including additional steps you must take to be able to access your file system using a DNS alias.
The system response shows the DNS aliases that Amazon FSx is attempting to associate with the file system. Use the API operation to monitor the status of the aliases Amazon FSx is associating with the file system.
associateFileSystemAliasesAsync in interface AmazonFSxAsyncrequest - The request object specifying one or more DNS alias names to associate with an Amazon FSx for Windows File
Server file system.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CancelDataRepositoryTaskResult> cancelDataRepositoryTaskAsync(CancelDataRepositoryTaskRequest request)
AmazonFSxAsync
Cancels an existing Amazon FSx for Lustre data repository task if that task is in either the PENDING
or EXECUTING state. When you cancel am export task, Amazon FSx does the following.
Any files that FSx has already exported are not reverted.
FSx continues to export any files that are in-flight when the cancel operation is received.
FSx does not export any files that have not yet been exported.
For a release task, Amazon FSx will stop releasing files upon cancellation. Any files that have already been released will remain in the released state.
cancelDataRepositoryTaskAsync in interface AmazonFSxAsyncrequest - Cancels a data repository task.public Future<CancelDataRepositoryTaskResult> cancelDataRepositoryTaskAsync(CancelDataRepositoryTaskRequest request, AsyncHandler<CancelDataRepositoryTaskRequest,CancelDataRepositoryTaskResult> asyncHandler)
AmazonFSxAsync
Cancels an existing Amazon FSx for Lustre data repository task if that task is in either the PENDING
or EXECUTING state. When you cancel am export task, Amazon FSx does the following.
Any files that FSx has already exported are not reverted.
FSx continues to export any files that are in-flight when the cancel operation is received.
FSx does not export any files that have not yet been exported.
For a release task, Amazon FSx will stop releasing files upon cancellation. Any files that have already been released will remain in the released state.
cancelDataRepositoryTaskAsync in interface AmazonFSxAsyncrequest - Cancels a data repository task.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CopyBackupResult> copyBackupAsync(CopyBackupRequest request)
AmazonFSxAsyncCopies an existing backup within the same Amazon Web Services account to another Amazon Web Services Region (cross-Region copy) or within the same Amazon Web Services Region (in-Region copy). You can have up to five backup copy requests in progress to a single destination Region per account.
You can use cross-Region backup copies for cross-Region disaster recovery. You can periodically take backups and
copy them to another Region so that in the event of a disaster in the primary Region, you can restore from backup
and recover availability quickly in the other Region. You can make cross-Region copies only within your Amazon
Web Services partition. A partition is a grouping of Regions. Amazon Web Services currently has three partitions:
aws (Standard Regions), aws-cn (China Regions), and aws-us-gov (Amazon Web
Services GovCloud [US] Regions).
You can also use backup copies to clone your file dataset to another Region or within the same Region.
You can use the SourceRegion parameter to specify the Amazon Web Services Region from which the
backup will be copied. For example, if you make the call from the us-west-1 Region and want to copy
a backup from the us-east-2 Region, you specify us-east-2 in the
SourceRegion parameter to make a cross-Region copy. If you don't specify a Region, the backup copy
is created in the same Region where the request is sent from (in-Region copy).
For more information about creating backup copies, see Copying backups in the Amazon FSx for Windows User Guide, Copying backups in the Amazon FSx for Lustre User Guide, and Copying backups in the Amazon FSx for OpenZFS User Guide.
copyBackupAsync in interface AmazonFSxAsyncpublic Future<CopyBackupResult> copyBackupAsync(CopyBackupRequest request, AsyncHandler<CopyBackupRequest,CopyBackupResult> asyncHandler)
AmazonFSxAsyncCopies an existing backup within the same Amazon Web Services account to another Amazon Web Services Region (cross-Region copy) or within the same Amazon Web Services Region (in-Region copy). You can have up to five backup copy requests in progress to a single destination Region per account.
You can use cross-Region backup copies for cross-Region disaster recovery. You can periodically take backups and
copy them to another Region so that in the event of a disaster in the primary Region, you can restore from backup
and recover availability quickly in the other Region. You can make cross-Region copies only within your Amazon
Web Services partition. A partition is a grouping of Regions. Amazon Web Services currently has three partitions:
aws (Standard Regions), aws-cn (China Regions), and aws-us-gov (Amazon Web
Services GovCloud [US] Regions).
You can also use backup copies to clone your file dataset to another Region or within the same Region.
You can use the SourceRegion parameter to specify the Amazon Web Services Region from which the
backup will be copied. For example, if you make the call from the us-west-1 Region and want to copy
a backup from the us-east-2 Region, you specify us-east-2 in the
SourceRegion parameter to make a cross-Region copy. If you don't specify a Region, the backup copy
is created in the same Region where the request is sent from (in-Region copy).
For more information about creating backup copies, see Copying backups in the Amazon FSx for Windows User Guide, Copying backups in the Amazon FSx for Lustre User Guide, and Copying backups in the Amazon FSx for OpenZFS User Guide.
copyBackupAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CreateBackupResult> createBackupAsync(CreateBackupRequest request)
AmazonFSxAsyncCreates a backup of an existing Amazon FSx for Windows File Server file system, Amazon FSx for Lustre file system, Amazon FSx for NetApp ONTAP volume, or Amazon FSx for OpenZFS file system. We recommend creating regular backups so that you can restore a file system or volume from a backup if an issue arises with the original file system or volume.
For Amazon FSx for Lustre file systems, you can create a backup only for file systems that have the following configuration:
A Persistent deployment type
Are not linked to a data repository
For more information about backups, see the following:
For Amazon FSx for Lustre, see Working with FSx for Lustre backups.
For Amazon FSx for Windows, see Working with FSx for Windows backups.
For Amazon FSx for NetApp ONTAP, see Working with FSx for NetApp ONTAP backups.
For Amazon FSx for OpenZFS, see Working with FSx for OpenZFS backups.
If a backup with the specified client request token exists and the parameters match, this operation returns the
description of the existing backup. If a backup with the specified client request token exists and the parameters
don't match, this operation returns IncompatibleParameterError. If a backup with the specified
client request token doesn't exist, CreateBackup does the following:
Creates a new Amazon FSx backup with an assigned ID, and an initial lifecycle state of CREATING.
Returns the description of the backup.
By using the idempotent operation, you can retry a CreateBackup operation without the risk of
creating an extra backup. This approach can be useful when an initial call fails in a way that makes it unclear
whether a backup was created. If you use the same client request token and the initial call created a backup, the
operation returns a successful result because all the parameters are the same.
The CreateBackup operation returns while the backup's lifecycle state is still CREATING
. You can check the backup creation status by calling the DescribeBackups
operation, which returns the backup state along with other information.
createBackupAsync in interface AmazonFSxAsyncrequest - The request object for the CreateBackup operation.public Future<CreateBackupResult> createBackupAsync(CreateBackupRequest request, AsyncHandler<CreateBackupRequest,CreateBackupResult> asyncHandler)
AmazonFSxAsyncCreates a backup of an existing Amazon FSx for Windows File Server file system, Amazon FSx for Lustre file system, Amazon FSx for NetApp ONTAP volume, or Amazon FSx for OpenZFS file system. We recommend creating regular backups so that you can restore a file system or volume from a backup if an issue arises with the original file system or volume.
For Amazon FSx for Lustre file systems, you can create a backup only for file systems that have the following configuration:
A Persistent deployment type
Are not linked to a data repository
For more information about backups, see the following:
For Amazon FSx for Lustre, see Working with FSx for Lustre backups.
For Amazon FSx for Windows, see Working with FSx for Windows backups.
For Amazon FSx for NetApp ONTAP, see Working with FSx for NetApp ONTAP backups.
For Amazon FSx for OpenZFS, see Working with FSx for OpenZFS backups.
If a backup with the specified client request token exists and the parameters match, this operation returns the
description of the existing backup. If a backup with the specified client request token exists and the parameters
don't match, this operation returns IncompatibleParameterError. If a backup with the specified
client request token doesn't exist, CreateBackup does the following:
Creates a new Amazon FSx backup with an assigned ID, and an initial lifecycle state of CREATING.
Returns the description of the backup.
By using the idempotent operation, you can retry a CreateBackup operation without the risk of
creating an extra backup. This approach can be useful when an initial call fails in a way that makes it unclear
whether a backup was created. If you use the same client request token and the initial call created a backup, the
operation returns a successful result because all the parameters are the same.
The CreateBackup operation returns while the backup's lifecycle state is still CREATING
. You can check the backup creation status by calling the DescribeBackups
operation, which returns the backup state along with other information.
createBackupAsync in interface AmazonFSxAsyncrequest - The request object for the CreateBackup operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CreateDataRepositoryAssociationResult> createDataRepositoryAssociationAsync(CreateDataRepositoryAssociationRequest request)
AmazonFSxAsync
Creates an Amazon FSx for Lustre data repository association (DRA). A data repository association is a link
between a directory on the file system and an Amazon S3 bucket or prefix. You can have a maximum of 8 data
repository associations on a file system. Data repository associations are supported on all FSx for Lustre 2.12
and 2.15 file systems, excluding scratch_1 deployment type.
Each data repository association must have a unique Amazon FSx file system directory and a unique S3 bucket or prefix associated with it. You can configure a data repository association for automatic import only, for automatic export only, or for both. To learn more about linking a data repository to your file system, see Linking your file system to an S3 bucket.
CreateDataRepositoryAssociation isn't supported on Amazon File Cache resources. To create a DRA on
Amazon File Cache, use the CreateFileCache operation.
createDataRepositoryAssociationAsync in interface AmazonFSxAsyncpublic Future<CreateDataRepositoryAssociationResult> createDataRepositoryAssociationAsync(CreateDataRepositoryAssociationRequest request, AsyncHandler<CreateDataRepositoryAssociationRequest,CreateDataRepositoryAssociationResult> asyncHandler)
AmazonFSxAsync
Creates an Amazon FSx for Lustre data repository association (DRA). A data repository association is a link
between a directory on the file system and an Amazon S3 bucket or prefix. You can have a maximum of 8 data
repository associations on a file system. Data repository associations are supported on all FSx for Lustre 2.12
and 2.15 file systems, excluding scratch_1 deployment type.
Each data repository association must have a unique Amazon FSx file system directory and a unique S3 bucket or prefix associated with it. You can configure a data repository association for automatic import only, for automatic export only, or for both. To learn more about linking a data repository to your file system, see Linking your file system to an S3 bucket.
CreateDataRepositoryAssociation isn't supported on Amazon File Cache resources. To create a DRA on
Amazon File Cache, use the CreateFileCache operation.
createDataRepositoryAssociationAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CreateDataRepositoryTaskResult> createDataRepositoryTaskAsync(CreateDataRepositoryTaskRequest request)
AmazonFSxAsync
Creates an Amazon FSx for Lustre data repository task. A CreateDataRepositoryTask operation will
fail if a data repository is not linked to the FSx file system.
You use import and export data repository tasks to perform bulk operations between your FSx for Lustre file system and its linked data repositories. An example of a data repository task is exporting any data and metadata changes, including POSIX metadata, to files, directories, and symbolic links (symlinks) from your FSx file system to a linked data repository.
You use release data repository tasks to release data from your file system for files that are exported to S3. The metadata of released files remains on the file system so users or applications can still access released files by reading the files again, which will restore data from Amazon S3 to the FSx for Lustre file system.
To learn more about data repository tasks, see Data Repository Tasks. To learn more about linking a data repository to your file system, see Linking your file system to an S3 bucket.
createDataRepositoryTaskAsync in interface AmazonFSxAsyncpublic Future<CreateDataRepositoryTaskResult> createDataRepositoryTaskAsync(CreateDataRepositoryTaskRequest request, AsyncHandler<CreateDataRepositoryTaskRequest,CreateDataRepositoryTaskResult> asyncHandler)
AmazonFSxAsync
Creates an Amazon FSx for Lustre data repository task. A CreateDataRepositoryTask operation will
fail if a data repository is not linked to the FSx file system.
You use import and export data repository tasks to perform bulk operations between your FSx for Lustre file system and its linked data repositories. An example of a data repository task is exporting any data and metadata changes, including POSIX metadata, to files, directories, and symbolic links (symlinks) from your FSx file system to a linked data repository.
You use release data repository tasks to release data from your file system for files that are exported to S3. The metadata of released files remains on the file system so users or applications can still access released files by reading the files again, which will restore data from Amazon S3 to the FSx for Lustre file system.
To learn more about data repository tasks, see Data Repository Tasks. To learn more about linking a data repository to your file system, see Linking your file system to an S3 bucket.
createDataRepositoryTaskAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CreateFileCacheResult> createFileCacheAsync(CreateFileCacheRequest request)
AmazonFSxAsyncCreates a new Amazon File Cache resource.
You can use this operation with a client request token in the request that Amazon File Cache uses to ensure
idempotent creation. If a cache with the specified client request token exists and the parameters match,
CreateFileCache returns the description of the existing cache. If a cache with the specified client
request token exists and the parameters don't match, this call returns IncompatibleParameterError.
If a file cache with the specified client request token doesn't exist, CreateFileCache does the
following:
Creates a new, empty Amazon File Cache resourcewith an assigned ID, and an initial lifecycle state of
CREATING.
Returns the description of the cache in JSON format.
The CreateFileCache call returns while the cache's lifecycle state is still CREATING.
You can check the cache creation status by calling the DescribeFileCaches
operation, which returns the cache state along with other information.
createFileCacheAsync in interface AmazonFSxAsyncpublic Future<CreateFileCacheResult> createFileCacheAsync(CreateFileCacheRequest request, AsyncHandler<CreateFileCacheRequest,CreateFileCacheResult> asyncHandler)
AmazonFSxAsyncCreates a new Amazon File Cache resource.
You can use this operation with a client request token in the request that Amazon File Cache uses to ensure
idempotent creation. If a cache with the specified client request token exists and the parameters match,
CreateFileCache returns the description of the existing cache. If a cache with the specified client
request token exists and the parameters don't match, this call returns IncompatibleParameterError.
If a file cache with the specified client request token doesn't exist, CreateFileCache does the
following:
Creates a new, empty Amazon File Cache resourcewith an assigned ID, and an initial lifecycle state of
CREATING.
Returns the description of the cache in JSON format.
The CreateFileCache call returns while the cache's lifecycle state is still CREATING.
You can check the cache creation status by calling the DescribeFileCaches
operation, which returns the cache state along with other information.
createFileCacheAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CreateFileSystemResult> createFileSystemAsync(CreateFileSystemRequest request)
AmazonFSxAsync
Creates a new, empty Amazon FSx file system. You can create the following supported Amazon FSx file systems using
the CreateFileSystem API operation:
Amazon FSx for Lustre
Amazon FSx for NetApp ONTAP
Amazon FSx for OpenZFS
Amazon FSx for Windows File Server
This operation requires a client request token in the request that Amazon FSx uses to ensure idempotent creation.
This means that calling the operation multiple times with the same client request token has no effect. By using
the idempotent operation, you can retry a CreateFileSystem operation without the risk of creating an
extra file system. This approach can be useful when an initial call fails in a way that makes it unclear whether
a file system was created. Examples are if a transport level timeout occurred, or your connection was reset. If
you use the same client request token and the initial call created a file system, the client receives success as
long as the parameters are the same.
If a file system with the specified client request token exists and the parameters match,
CreateFileSystem returns the description of the existing file system. If a file system with the
specified client request token exists and the parameters don't match, this call returns
IncompatibleParameterError. If a file system with the specified client request token doesn't exist,
CreateFileSystem does the following:
Creates a new, empty Amazon FSx file system with an assigned ID, and an initial lifecycle state of
CREATING.
Returns the description of the file system in JSON format.
The CreateFileSystem call returns while the file system's lifecycle state is still
CREATING. You can check the file-system creation status by calling the DescribeFileSystems
operation, which returns the file system state along with other information.
createFileSystemAsync in interface AmazonFSxAsyncrequest - The request object used to create a new Amazon FSx file system.public Future<CreateFileSystemResult> createFileSystemAsync(CreateFileSystemRequest request, AsyncHandler<CreateFileSystemRequest,CreateFileSystemResult> asyncHandler)
AmazonFSxAsync
Creates a new, empty Amazon FSx file system. You can create the following supported Amazon FSx file systems using
the CreateFileSystem API operation:
Amazon FSx for Lustre
Amazon FSx for NetApp ONTAP
Amazon FSx for OpenZFS
Amazon FSx for Windows File Server
This operation requires a client request token in the request that Amazon FSx uses to ensure idempotent creation.
This means that calling the operation multiple times with the same client request token has no effect. By using
the idempotent operation, you can retry a CreateFileSystem operation without the risk of creating an
extra file system. This approach can be useful when an initial call fails in a way that makes it unclear whether
a file system was created. Examples are if a transport level timeout occurred, or your connection was reset. If
you use the same client request token and the initial call created a file system, the client receives success as
long as the parameters are the same.
If a file system with the specified client request token exists and the parameters match,
CreateFileSystem returns the description of the existing file system. If a file system with the
specified client request token exists and the parameters don't match, this call returns
IncompatibleParameterError. If a file system with the specified client request token doesn't exist,
CreateFileSystem does the following:
Creates a new, empty Amazon FSx file system with an assigned ID, and an initial lifecycle state of
CREATING.
Returns the description of the file system in JSON format.
The CreateFileSystem call returns while the file system's lifecycle state is still
CREATING. You can check the file-system creation status by calling the DescribeFileSystems
operation, which returns the file system state along with other information.
createFileSystemAsync in interface AmazonFSxAsyncrequest - The request object used to create a new Amazon FSx file system.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CreateFileSystemFromBackupResult> createFileSystemFromBackupAsync(CreateFileSystemFromBackupRequest request)
AmazonFSxAsyncCreates a new Amazon FSx for Lustre, Amazon FSx for Windows File Server, or Amazon FSx for OpenZFS file system from an existing Amazon FSx backup.
If a file system with the specified client request token exists and the parameters match, this operation returns
the description of the file system. If a file system with the specified client request token exists but the
parameters don't match, this call returns IncompatibleParameterError. If a file system with the
specified client request token doesn't exist, this operation does the following:
Creates a new Amazon FSx file system from backup with an assigned ID, and an initial lifecycle state of
CREATING.
Returns the description of the file system.
Parameters like the Active Directory, default share name, automatic backup, and backup settings default to the parameters of the file system that was backed up, unless overridden. You can explicitly supply other settings.
By using the idempotent operation, you can retry a CreateFileSystemFromBackup call without the risk
of creating an extra file system. This approach can be useful when an initial call fails in a way that makes it
unclear whether a file system was created. Examples are if a transport level timeout occurred, or your connection
was reset. If you use the same client request token and the initial call created a file system, the client
receives a success message as long as the parameters are the same.
The CreateFileSystemFromBackup call returns while the file system's lifecycle state is still
CREATING. You can check the file-system creation status by calling the DescribeFileSystems
operation, which returns the file system state along with other information.
createFileSystemFromBackupAsync in interface AmazonFSxAsyncrequest - The request object for the CreateFileSystemFromBackup operation.public Future<CreateFileSystemFromBackupResult> createFileSystemFromBackupAsync(CreateFileSystemFromBackupRequest request, AsyncHandler<CreateFileSystemFromBackupRequest,CreateFileSystemFromBackupResult> asyncHandler)
AmazonFSxAsyncCreates a new Amazon FSx for Lustre, Amazon FSx for Windows File Server, or Amazon FSx for OpenZFS file system from an existing Amazon FSx backup.
If a file system with the specified client request token exists and the parameters match, this operation returns
the description of the file system. If a file system with the specified client request token exists but the
parameters don't match, this call returns IncompatibleParameterError. If a file system with the
specified client request token doesn't exist, this operation does the following:
Creates a new Amazon FSx file system from backup with an assigned ID, and an initial lifecycle state of
CREATING.
Returns the description of the file system.
Parameters like the Active Directory, default share name, automatic backup, and backup settings default to the parameters of the file system that was backed up, unless overridden. You can explicitly supply other settings.
By using the idempotent operation, you can retry a CreateFileSystemFromBackup call without the risk
of creating an extra file system. This approach can be useful when an initial call fails in a way that makes it
unclear whether a file system was created. Examples are if a transport level timeout occurred, or your connection
was reset. If you use the same client request token and the initial call created a file system, the client
receives a success message as long as the parameters are the same.
The CreateFileSystemFromBackup call returns while the file system's lifecycle state is still
CREATING. You can check the file-system creation status by calling the DescribeFileSystems
operation, which returns the file system state along with other information.
createFileSystemFromBackupAsync in interface AmazonFSxAsyncrequest - The request object for the CreateFileSystemFromBackup operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CreateSnapshotResult> createSnapshotAsync(CreateSnapshotRequest request)
AmazonFSxAsyncCreates a snapshot of an existing Amazon FSx for OpenZFS volume. With snapshots, you can easily undo file changes and compare file versions by restoring the volume to a previous version.
If a snapshot with the specified client request token exists, and the parameters match, this operation returns
the description of the existing snapshot. If a snapshot with the specified client request token exists, and the
parameters don't match, this operation returns IncompatibleParameterError. If a snapshot with the
specified client request token doesn't exist, CreateSnapshot does the following:
Creates a new OpenZFS snapshot with an assigned ID, and an initial lifecycle state of CREATING.
Returns the description of the snapshot.
By using the idempotent operation, you can retry a CreateSnapshot operation without the risk of
creating an extra snapshot. This approach can be useful when an initial call fails in a way that makes it unclear
whether a snapshot was created. If you use the same client request token and the initial call created a snapshot,
the operation returns a successful result because all the parameters are the same.
The CreateSnapshot operation returns while the snapshot's lifecycle state is still
CREATING. You can check the snapshot creation status by calling the DescribeSnapshots
operation, which returns the snapshot state along with other information.
createSnapshotAsync in interface AmazonFSxAsyncpublic Future<CreateSnapshotResult> createSnapshotAsync(CreateSnapshotRequest request, AsyncHandler<CreateSnapshotRequest,CreateSnapshotResult> asyncHandler)
AmazonFSxAsyncCreates a snapshot of an existing Amazon FSx for OpenZFS volume. With snapshots, you can easily undo file changes and compare file versions by restoring the volume to a previous version.
If a snapshot with the specified client request token exists, and the parameters match, this operation returns
the description of the existing snapshot. If a snapshot with the specified client request token exists, and the
parameters don't match, this operation returns IncompatibleParameterError. If a snapshot with the
specified client request token doesn't exist, CreateSnapshot does the following:
Creates a new OpenZFS snapshot with an assigned ID, and an initial lifecycle state of CREATING.
Returns the description of the snapshot.
By using the idempotent operation, you can retry a CreateSnapshot operation without the risk of
creating an extra snapshot. This approach can be useful when an initial call fails in a way that makes it unclear
whether a snapshot was created. If you use the same client request token and the initial call created a snapshot,
the operation returns a successful result because all the parameters are the same.
The CreateSnapshot operation returns while the snapshot's lifecycle state is still
CREATING. You can check the snapshot creation status by calling the DescribeSnapshots
operation, which returns the snapshot state along with other information.
createSnapshotAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CreateStorageVirtualMachineResult> createStorageVirtualMachineAsync(CreateStorageVirtualMachineRequest request)
AmazonFSxAsyncCreates a storage virtual machine (SVM) for an Amazon FSx for ONTAP file system.
createStorageVirtualMachineAsync in interface AmazonFSxAsyncpublic Future<CreateStorageVirtualMachineResult> createStorageVirtualMachineAsync(CreateStorageVirtualMachineRequest request, AsyncHandler<CreateStorageVirtualMachineRequest,CreateStorageVirtualMachineResult> asyncHandler)
AmazonFSxAsyncCreates a storage virtual machine (SVM) for an Amazon FSx for ONTAP file system.
createStorageVirtualMachineAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CreateVolumeResult> createVolumeAsync(CreateVolumeRequest request)
AmazonFSxAsyncCreates an FSx for ONTAP or Amazon FSx for OpenZFS storage volume.
createVolumeAsync in interface AmazonFSxAsyncpublic Future<CreateVolumeResult> createVolumeAsync(CreateVolumeRequest request, AsyncHandler<CreateVolumeRequest,CreateVolumeResult> asyncHandler)
AmazonFSxAsyncCreates an FSx for ONTAP or Amazon FSx for OpenZFS storage volume.
createVolumeAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<CreateVolumeFromBackupResult> createVolumeFromBackupAsync(CreateVolumeFromBackupRequest request)
AmazonFSxAsyncCreates a new Amazon FSx for NetApp ONTAP volume from an existing Amazon FSx volume backup.
createVolumeFromBackupAsync in interface AmazonFSxAsyncpublic Future<CreateVolumeFromBackupResult> createVolumeFromBackupAsync(CreateVolumeFromBackupRequest request, AsyncHandler<CreateVolumeFromBackupRequest,CreateVolumeFromBackupResult> asyncHandler)
AmazonFSxAsyncCreates a new Amazon FSx for NetApp ONTAP volume from an existing Amazon FSx volume backup.
createVolumeFromBackupAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DeleteBackupResult> deleteBackupAsync(DeleteBackupRequest request)
AmazonFSxAsyncDeletes an Amazon FSx backup. After deletion, the backup no longer exists, and its data is gone.
The DeleteBackup call returns instantly. The backup won't show up in later
DescribeBackups calls.
The data in a deleted backup is also deleted and can't be recovered by any means.
deleteBackupAsync in interface AmazonFSxAsyncrequest - The request object for the DeleteBackup operation.public Future<DeleteBackupResult> deleteBackupAsync(DeleteBackupRequest request, AsyncHandler<DeleteBackupRequest,DeleteBackupResult> asyncHandler)
AmazonFSxAsyncDeletes an Amazon FSx backup. After deletion, the backup no longer exists, and its data is gone.
The DeleteBackup call returns instantly. The backup won't show up in later
DescribeBackups calls.
The data in a deleted backup is also deleted and can't be recovered by any means.
deleteBackupAsync in interface AmazonFSxAsyncrequest - The request object for the DeleteBackup operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DeleteDataRepositoryAssociationResult> deleteDataRepositoryAssociationAsync(DeleteDataRepositoryAssociationRequest request)
AmazonFSxAsync
Deletes a data repository association on an Amazon FSx for Lustre file system. Deleting the data repository
association unlinks the file system from the Amazon S3 bucket. When deleting a data repository association, you
have the option of deleting the data in the file system that corresponds to the data repository association. Data
repository associations are supported on all FSx for Lustre 2.12 and 2.15 file systems, excluding
scratch_1 deployment type.
deleteDataRepositoryAssociationAsync in interface AmazonFSxAsyncpublic Future<DeleteDataRepositoryAssociationResult> deleteDataRepositoryAssociationAsync(DeleteDataRepositoryAssociationRequest request, AsyncHandler<DeleteDataRepositoryAssociationRequest,DeleteDataRepositoryAssociationResult> asyncHandler)
AmazonFSxAsync
Deletes a data repository association on an Amazon FSx for Lustre file system. Deleting the data repository
association unlinks the file system from the Amazon S3 bucket. When deleting a data repository association, you
have the option of deleting the data in the file system that corresponds to the data repository association. Data
repository associations are supported on all FSx for Lustre 2.12 and 2.15 file systems, excluding
scratch_1 deployment type.
deleteDataRepositoryAssociationAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DeleteFileCacheResult> deleteFileCacheAsync(DeleteFileCacheRequest request)
AmazonFSxAsyncDeletes an Amazon File Cache resource. After deletion, the cache no longer exists, and its data is gone.
The DeleteFileCache operation returns while the cache has the DELETING status. You can
check the cache deletion status by calling the DescribeFileCaches
operation, which returns a list of caches in your account. If you pass the cache ID for a deleted cache, the
DescribeFileCaches operation returns a FileCacheNotFound error.
The data in a deleted cache is also deleted and can't be recovered by any means.
deleteFileCacheAsync in interface AmazonFSxAsyncpublic Future<DeleteFileCacheResult> deleteFileCacheAsync(DeleteFileCacheRequest request, AsyncHandler<DeleteFileCacheRequest,DeleteFileCacheResult> asyncHandler)
AmazonFSxAsyncDeletes an Amazon File Cache resource. After deletion, the cache no longer exists, and its data is gone.
The DeleteFileCache operation returns while the cache has the DELETING status. You can
check the cache deletion status by calling the DescribeFileCaches
operation, which returns a list of caches in your account. If you pass the cache ID for a deleted cache, the
DescribeFileCaches operation returns a FileCacheNotFound error.
The data in a deleted cache is also deleted and can't be recovered by any means.
deleteFileCacheAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DeleteFileSystemResult> deleteFileSystemAsync(DeleteFileSystemRequest request)
AmazonFSxAsyncDeletes a file system. After deletion, the file system no longer exists, and its data is gone. Any existing automatic backups and snapshots are also deleted.
To delete an Amazon FSx for NetApp ONTAP file system, first delete all the volumes and storage virtual machines
(SVMs) on the file system. Then provide a FileSystemId value to the DeleFileSystem
operation.
By default, when you delete an Amazon FSx for Windows File Server file system, a final backup is created upon deletion. This final backup isn't subject to the file system's retention policy, and must be manually deleted.
To delete an Amazon FSx for Lustre file system, first unmount it from every connected
Amazon EC2 instance, then provide a FileSystemId value to the DeleFileSystem operation.
By default, Amazon FSx will not take a final backup when the DeleteFileSystem operation is invoked.
On file systems not linked to an Amazon S3 bucket, set SkipFinalBackup to false to take
a final backup of the file system you are deleting. Backups cannot be enabled on S3-linked file systems. To
ensure all of your data is written back to S3 before deleting your file system, you can either monitor for the
AgeOfOldestQueuedMessage metric to be zero (if using automatic export) or you can run an export data repository
task. If you have automatic export enabled and want to use an export data repository task, you have to
disable automatic export before executing the export data repository task.
The DeleteFileSystem operation returns while the file system has the DELETING status.
You can check the file system deletion status by calling the DescribeFileSystems
operation, which returns a list of file systems in your account. If you pass the file system ID for a deleted
file system, the DescribeFileSystems operation returns a FileSystemNotFound error.
If a data repository task is in a PENDING or EXECUTING state, deleting an Amazon FSx
for Lustre file system will fail with an HTTP status code 400 (Bad Request).
The data in a deleted file system is also deleted and can't be recovered by any means.
deleteFileSystemAsync in interface AmazonFSxAsyncrequest - The request object for DeleteFileSystem operation.public Future<DeleteFileSystemResult> deleteFileSystemAsync(DeleteFileSystemRequest request, AsyncHandler<DeleteFileSystemRequest,DeleteFileSystemResult> asyncHandler)
AmazonFSxAsyncDeletes a file system. After deletion, the file system no longer exists, and its data is gone. Any existing automatic backups and snapshots are also deleted.
To delete an Amazon FSx for NetApp ONTAP file system, first delete all the volumes and storage virtual machines
(SVMs) on the file system. Then provide a FileSystemId value to the DeleFileSystem
operation.
By default, when you delete an Amazon FSx for Windows File Server file system, a final backup is created upon deletion. This final backup isn't subject to the file system's retention policy, and must be manually deleted.
To delete an Amazon FSx for Lustre file system, first unmount it from every connected
Amazon EC2 instance, then provide a FileSystemId value to the DeleFileSystem operation.
By default, Amazon FSx will not take a final backup when the DeleteFileSystem operation is invoked.
On file systems not linked to an Amazon S3 bucket, set SkipFinalBackup to false to take
a final backup of the file system you are deleting. Backups cannot be enabled on S3-linked file systems. To
ensure all of your data is written back to S3 before deleting your file system, you can either monitor for the
AgeOfOldestQueuedMessage metric to be zero (if using automatic export) or you can run an export data repository
task. If you have automatic export enabled and want to use an export data repository task, you have to
disable automatic export before executing the export data repository task.
The DeleteFileSystem operation returns while the file system has the DELETING status.
You can check the file system deletion status by calling the DescribeFileSystems
operation, which returns a list of file systems in your account. If you pass the file system ID for a deleted
file system, the DescribeFileSystems operation returns a FileSystemNotFound error.
If a data repository task is in a PENDING or EXECUTING state, deleting an Amazon FSx
for Lustre file system will fail with an HTTP status code 400 (Bad Request).
The data in a deleted file system is also deleted and can't be recovered by any means.
deleteFileSystemAsync in interface AmazonFSxAsyncrequest - The request object for DeleteFileSystem operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DeleteSnapshotResult> deleteSnapshotAsync(DeleteSnapshotRequest request)
AmazonFSxAsyncDeletes an Amazon FSx for OpenZFS snapshot. After deletion, the snapshot no longer exists, and its data is gone. Deleting a snapshot doesn't affect snapshots stored in a file system backup.
The DeleteSnapshot operation returns instantly. The snapshot appears with the lifecycle status of
DELETING until the deletion is complete.
deleteSnapshotAsync in interface AmazonFSxAsyncpublic Future<DeleteSnapshotResult> deleteSnapshotAsync(DeleteSnapshotRequest request, AsyncHandler<DeleteSnapshotRequest,DeleteSnapshotResult> asyncHandler)
AmazonFSxAsyncDeletes an Amazon FSx for OpenZFS snapshot. After deletion, the snapshot no longer exists, and its data is gone. Deleting a snapshot doesn't affect snapshots stored in a file system backup.
The DeleteSnapshot operation returns instantly. The snapshot appears with the lifecycle status of
DELETING until the deletion is complete.
deleteSnapshotAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DeleteStorageVirtualMachineResult> deleteStorageVirtualMachineAsync(DeleteStorageVirtualMachineRequest request)
AmazonFSxAsyncDeletes an existing Amazon FSx for ONTAP storage virtual machine (SVM). Prior to deleting an SVM, you must delete all non-root volumes in the SVM, otherwise the operation will fail.
deleteStorageVirtualMachineAsync in interface AmazonFSxAsyncpublic Future<DeleteStorageVirtualMachineResult> deleteStorageVirtualMachineAsync(DeleteStorageVirtualMachineRequest request, AsyncHandler<DeleteStorageVirtualMachineRequest,DeleteStorageVirtualMachineResult> asyncHandler)
AmazonFSxAsyncDeletes an existing Amazon FSx for ONTAP storage virtual machine (SVM). Prior to deleting an SVM, you must delete all non-root volumes in the SVM, otherwise the operation will fail.
deleteStorageVirtualMachineAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DeleteVolumeResult> deleteVolumeAsync(DeleteVolumeRequest request)
AmazonFSxAsyncDeletes an Amazon FSx for NetApp ONTAP or Amazon FSx for OpenZFS volume.
deleteVolumeAsync in interface AmazonFSxAsyncpublic Future<DeleteVolumeResult> deleteVolumeAsync(DeleteVolumeRequest request, AsyncHandler<DeleteVolumeRequest,DeleteVolumeResult> asyncHandler)
AmazonFSxAsyncDeletes an Amazon FSx for NetApp ONTAP or Amazon FSx for OpenZFS volume.
deleteVolumeAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DescribeBackupsResult> describeBackupsAsync(DescribeBackupsRequest request)
AmazonFSxAsync
Returns the description of a specific Amazon FSx backup, if a BackupIds value is provided for that
backup. Otherwise, it returns all backups owned by your Amazon Web Services account in the Amazon Web Services
Region of the endpoint that you're calling.
When retrieving all backups, you can optionally specify the MaxResults parameter to limit the number
of backups in a response. If more backups remain, Amazon FSx returns a NextToken value in the
response. In this case, send a later request with the NextToken request parameter set to the value
of the NextToken value from the last response.
This operation is used in an iterative process to retrieve a list of your backups. DescribeBackups
is called first without a NextToken value. Then the operation continues to be called with the
NextToken parameter set to the value of the last NextToken value until a response has
no NextToken value.
When using this operation, keep the following in mind:
The operation might return fewer than the MaxResults value of backup descriptions while still
including a NextToken value.
The order of the backups returned in the response of one DescribeBackups call and the order of the
backups returned across the responses of a multi-call iteration is unspecified.
describeBackupsAsync in interface AmazonFSxAsyncrequest - The request object for the DescribeBackups operation.public Future<DescribeBackupsResult> describeBackupsAsync(DescribeBackupsRequest request, AsyncHandler<DescribeBackupsRequest,DescribeBackupsResult> asyncHandler)
AmazonFSxAsync
Returns the description of a specific Amazon FSx backup, if a BackupIds value is provided for that
backup. Otherwise, it returns all backups owned by your Amazon Web Services account in the Amazon Web Services
Region of the endpoint that you're calling.
When retrieving all backups, you can optionally specify the MaxResults parameter to limit the number
of backups in a response. If more backups remain, Amazon FSx returns a NextToken value in the
response. In this case, send a later request with the NextToken request parameter set to the value
of the NextToken value from the last response.
This operation is used in an iterative process to retrieve a list of your backups. DescribeBackups
is called first without a NextToken value. Then the operation continues to be called with the
NextToken parameter set to the value of the last NextToken value until a response has
no NextToken value.
When using this operation, keep the following in mind:
The operation might return fewer than the MaxResults value of backup descriptions while still
including a NextToken value.
The order of the backups returned in the response of one DescribeBackups call and the order of the
backups returned across the responses of a multi-call iteration is unspecified.
describeBackupsAsync in interface AmazonFSxAsyncrequest - The request object for the DescribeBackups operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DescribeDataRepositoryAssociationsResult> describeDataRepositoryAssociationsAsync(DescribeDataRepositoryAssociationsRequest request)
AmazonFSxAsync
Returns the description of specific Amazon FSx for Lustre or Amazon File Cache data repository associations, if
one or more AssociationIds values are provided in the request, or if filters are used in the
request. Data repository associations are supported on Amazon File Cache resources and all FSx for Lustre 2.12
and 2,15 file systems, excluding scratch_1 deployment type.
You can use filters to narrow the response to include just data repository associations for specific file systems
(use the file-system-id filter with the ID of the file system) or caches (use the
file-cache-id filter with the ID of the cache), or data repository associations for a specific
repository type (use the data-repository-type filter with a value of S3 or
NFS). If you don't use filters, the response returns all data repository associations owned by your
Amazon Web Services account in the Amazon Web Services Region of the endpoint that you're calling.
When retrieving all data repository associations, you can paginate the response by using the optional
MaxResults parameter to limit the number of data repository associations returned in a response. If
more data repository associations remain, a NextToken value is returned in the response. In this
case, send a later request with the NextToken request parameter set to the value of
NextToken from the last response.
describeDataRepositoryAssociationsAsync in interface AmazonFSxAsyncpublic Future<DescribeDataRepositoryAssociationsResult> describeDataRepositoryAssociationsAsync(DescribeDataRepositoryAssociationsRequest request, AsyncHandler<DescribeDataRepositoryAssociationsRequest,DescribeDataRepositoryAssociationsResult> asyncHandler)
AmazonFSxAsync
Returns the description of specific Amazon FSx for Lustre or Amazon File Cache data repository associations, if
one or more AssociationIds values are provided in the request, or if filters are used in the
request. Data repository associations are supported on Amazon File Cache resources and all FSx for Lustre 2.12
and 2,15 file systems, excluding scratch_1 deployment type.
You can use filters to narrow the response to include just data repository associations for specific file systems
(use the file-system-id filter with the ID of the file system) or caches (use the
file-cache-id filter with the ID of the cache), or data repository associations for a specific
repository type (use the data-repository-type filter with a value of S3 or
NFS). If you don't use filters, the response returns all data repository associations owned by your
Amazon Web Services account in the Amazon Web Services Region of the endpoint that you're calling.
When retrieving all data repository associations, you can paginate the response by using the optional
MaxResults parameter to limit the number of data repository associations returned in a response. If
more data repository associations remain, a NextToken value is returned in the response. In this
case, send a later request with the NextToken request parameter set to the value of
NextToken from the last response.
describeDataRepositoryAssociationsAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DescribeDataRepositoryTasksResult> describeDataRepositoryTasksAsync(DescribeDataRepositoryTasksRequest request)
AmazonFSxAsync
Returns the description of specific Amazon FSx for Lustre or Amazon File Cache data repository tasks, if one or
more TaskIds values are provided in the request, or if filters are used in the request. You can use
filters to narrow the response to include just tasks for specific file systems or caches, or tasks in a specific
lifecycle state. Otherwise, it returns all data repository tasks owned by your Amazon Web Services account in the
Amazon Web Services Region of the endpoint that you're calling.
When retrieving all tasks, you can paginate the response by using the optional MaxResults parameter
to limit the number of tasks returned in a response. If more tasks remain, a NextToken value is
returned in the response. In this case, send a later request with the NextToken request parameter
set to the value of NextToken from the last response.
describeDataRepositoryTasksAsync in interface AmazonFSxAsyncpublic Future<DescribeDataRepositoryTasksResult> describeDataRepositoryTasksAsync(DescribeDataRepositoryTasksRequest request, AsyncHandler<DescribeDataRepositoryTasksRequest,DescribeDataRepositoryTasksResult> asyncHandler)
AmazonFSxAsync
Returns the description of specific Amazon FSx for Lustre or Amazon File Cache data repository tasks, if one or
more TaskIds values are provided in the request, or if filters are used in the request. You can use
filters to narrow the response to include just tasks for specific file systems or caches, or tasks in a specific
lifecycle state. Otherwise, it returns all data repository tasks owned by your Amazon Web Services account in the
Amazon Web Services Region of the endpoint that you're calling.
When retrieving all tasks, you can paginate the response by using the optional MaxResults parameter
to limit the number of tasks returned in a response. If more tasks remain, a NextToken value is
returned in the response. In this case, send a later request with the NextToken request parameter
set to the value of NextToken from the last response.
describeDataRepositoryTasksAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DescribeFileCachesResult> describeFileCachesAsync(DescribeFileCachesRequest request)
AmazonFSxAsync
Returns the description of a specific Amazon File Cache resource, if a FileCacheIds value is
provided for that cache. Otherwise, it returns descriptions of all caches owned by your Amazon Web Services
account in the Amazon Web Services Region of the endpoint that you're calling.
When retrieving all cache descriptions, you can optionally specify the MaxResults parameter to limit
the number of descriptions in a response. If more cache descriptions remain, the operation returns a
NextToken value in the response. In this case, send a later request with the NextToken
request parameter set to the value of NextToken from the last response.
This operation is used in an iterative process to retrieve a list of your cache descriptions.
DescribeFileCaches is called first without a NextTokenvalue. Then the operation
continues to be called with the NextToken parameter set to the value of the last
NextToken value until a response has no NextToken.
When using this operation, keep the following in mind:
The implementation might return fewer than MaxResults cache descriptions while still including a
NextToken value.
The order of caches returned in the response of one DescribeFileCaches call and the order of caches
returned across the responses of a multicall iteration is unspecified.
describeFileCachesAsync in interface AmazonFSxAsyncpublic Future<DescribeFileCachesResult> describeFileCachesAsync(DescribeFileCachesRequest request, AsyncHandler<DescribeFileCachesRequest,DescribeFileCachesResult> asyncHandler)
AmazonFSxAsync
Returns the description of a specific Amazon File Cache resource, if a FileCacheIds value is
provided for that cache. Otherwise, it returns descriptions of all caches owned by your Amazon Web Services
account in the Amazon Web Services Region of the endpoint that you're calling.
When retrieving all cache descriptions, you can optionally specify the MaxResults parameter to limit
the number of descriptions in a response. If more cache descriptions remain, the operation returns a
NextToken value in the response. In this case, send a later request with the NextToken
request parameter set to the value of NextToken from the last response.
This operation is used in an iterative process to retrieve a list of your cache descriptions.
DescribeFileCaches is called first without a NextTokenvalue. Then the operation
continues to be called with the NextToken parameter set to the value of the last
NextToken value until a response has no NextToken.
When using this operation, keep the following in mind:
The implementation might return fewer than MaxResults cache descriptions while still including a
NextToken value.
The order of caches returned in the response of one DescribeFileCaches call and the order of caches
returned across the responses of a multicall iteration is unspecified.
describeFileCachesAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DescribeFileSystemAliasesResult> describeFileSystemAliasesAsync(DescribeFileSystemAliasesRequest request)
AmazonFSxAsyncReturns the DNS aliases that are associated with the specified Amazon FSx for Windows File Server file system. A history of all DNS aliases that have been associated with and disassociated from the file system is available in the list of AdministrativeAction provided in the DescribeFileSystems operation response.
describeFileSystemAliasesAsync in interface AmazonFSxAsyncrequest - The request object for DescribeFileSystemAliases operation.public Future<DescribeFileSystemAliasesResult> describeFileSystemAliasesAsync(DescribeFileSystemAliasesRequest request, AsyncHandler<DescribeFileSystemAliasesRequest,DescribeFileSystemAliasesResult> asyncHandler)
AmazonFSxAsyncReturns the DNS aliases that are associated with the specified Amazon FSx for Windows File Server file system. A history of all DNS aliases that have been associated with and disassociated from the file system is available in the list of AdministrativeAction provided in the DescribeFileSystems operation response.
describeFileSystemAliasesAsync in interface AmazonFSxAsyncrequest - The request object for DescribeFileSystemAliases operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DescribeFileSystemsResult> describeFileSystemsAsync(DescribeFileSystemsRequest request)
AmazonFSxAsync
Returns the description of specific Amazon FSx file systems, if a FileSystemIds value is provided
for that file system. Otherwise, it returns descriptions of all file systems owned by your Amazon Web Services
account in the Amazon Web Services Region of the endpoint that you're calling.
When retrieving all file system descriptions, you can optionally specify the MaxResults parameter to
limit the number of descriptions in a response. If more file system descriptions remain, Amazon FSx returns a
NextToken value in the response. In this case, send a later request with the NextToken
request parameter set to the value of NextToken from the last response.
This operation is used in an iterative process to retrieve a list of your file system descriptions.
DescribeFileSystems is called first without a NextTokenvalue. Then the operation
continues to be called with the NextToken parameter set to the value of the last
NextToken value until a response has no NextToken.
When using this operation, keep the following in mind:
The implementation might return fewer than MaxResults file system descriptions while still including
a NextToken value.
The order of file systems returned in the response of one DescribeFileSystems call and the order of
file systems returned across the responses of a multicall iteration is unspecified.
describeFileSystemsAsync in interface AmazonFSxAsyncrequest - The request object for DescribeFileSystems operation.public Future<DescribeFileSystemsResult> describeFileSystemsAsync(DescribeFileSystemsRequest request, AsyncHandler<DescribeFileSystemsRequest,DescribeFileSystemsResult> asyncHandler)
AmazonFSxAsync
Returns the description of specific Amazon FSx file systems, if a FileSystemIds value is provided
for that file system. Otherwise, it returns descriptions of all file systems owned by your Amazon Web Services
account in the Amazon Web Services Region of the endpoint that you're calling.
When retrieving all file system descriptions, you can optionally specify the MaxResults parameter to
limit the number of descriptions in a response. If more file system descriptions remain, Amazon FSx returns a
NextToken value in the response. In this case, send a later request with the NextToken
request parameter set to the value of NextToken from the last response.
This operation is used in an iterative process to retrieve a list of your file system descriptions.
DescribeFileSystems is called first without a NextTokenvalue. Then the operation
continues to be called with the NextToken parameter set to the value of the last
NextToken value until a response has no NextToken.
When using this operation, keep the following in mind:
The implementation might return fewer than MaxResults file system descriptions while still including
a NextToken value.
The order of file systems returned in the response of one DescribeFileSystems call and the order of
file systems returned across the responses of a multicall iteration is unspecified.
describeFileSystemsAsync in interface AmazonFSxAsyncrequest - The request object for DescribeFileSystems operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DescribeSnapshotsResult> describeSnapshotsAsync(DescribeSnapshotsRequest request)
AmazonFSxAsync
Returns the description of specific Amazon FSx for OpenZFS snapshots, if a SnapshotIds value is
provided. Otherwise, this operation returns all snapshots owned by your Amazon Web Services account in the Amazon
Web Services Region of the endpoint that you're calling.
When retrieving all snapshots, you can optionally specify the MaxResults parameter to limit the
number of snapshots in a response. If more backups remain, Amazon FSx returns a NextToken value in
the response. In this case, send a later request with the NextToken request parameter set to the
value of NextToken from the last response.
Use this operation in an iterative process to retrieve a list of your snapshots. DescribeSnapshots
is called first without a NextToken value. Then the operation continues to be called with the
NextToken parameter set to the value of the last NextToken value until a response has
no NextToken value.
When using this operation, keep the following in mind:
The operation might return fewer than the MaxResults value of snapshot descriptions while still
including a NextToken value.
The order of snapshots returned in the response of one DescribeSnapshots call and the order of
backups returned across the responses of a multi-call iteration is unspecified.
describeSnapshotsAsync in interface AmazonFSxAsyncpublic Future<DescribeSnapshotsResult> describeSnapshotsAsync(DescribeSnapshotsRequest request, AsyncHandler<DescribeSnapshotsRequest,DescribeSnapshotsResult> asyncHandler)
AmazonFSxAsync
Returns the description of specific Amazon FSx for OpenZFS snapshots, if a SnapshotIds value is
provided. Otherwise, this operation returns all snapshots owned by your Amazon Web Services account in the Amazon
Web Services Region of the endpoint that you're calling.
When retrieving all snapshots, you can optionally specify the MaxResults parameter to limit the
number of snapshots in a response. If more backups remain, Amazon FSx returns a NextToken value in
the response. In this case, send a later request with the NextToken request parameter set to the
value of NextToken from the last response.
Use this operation in an iterative process to retrieve a list of your snapshots. DescribeSnapshots
is called first without a NextToken value. Then the operation continues to be called with the
NextToken parameter set to the value of the last NextToken value until a response has
no NextToken value.
When using this operation, keep the following in mind:
The operation might return fewer than the MaxResults value of snapshot descriptions while still
including a NextToken value.
The order of snapshots returned in the response of one DescribeSnapshots call and the order of
backups returned across the responses of a multi-call iteration is unspecified.
describeSnapshotsAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DescribeStorageVirtualMachinesResult> describeStorageVirtualMachinesAsync(DescribeStorageVirtualMachinesRequest request)
AmazonFSxAsyncDescribes one or more Amazon FSx for NetApp ONTAP storage virtual machines (SVMs).
describeStorageVirtualMachinesAsync in interface AmazonFSxAsyncpublic Future<DescribeStorageVirtualMachinesResult> describeStorageVirtualMachinesAsync(DescribeStorageVirtualMachinesRequest request, AsyncHandler<DescribeStorageVirtualMachinesRequest,DescribeStorageVirtualMachinesResult> asyncHandler)
AmazonFSxAsyncDescribes one or more Amazon FSx for NetApp ONTAP storage virtual machines (SVMs).
describeStorageVirtualMachinesAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DescribeVolumesResult> describeVolumesAsync(DescribeVolumesRequest request)
AmazonFSxAsyncDescribes one or more Amazon FSx for NetApp ONTAP or Amazon FSx for OpenZFS volumes.
describeVolumesAsync in interface AmazonFSxAsyncpublic Future<DescribeVolumesResult> describeVolumesAsync(DescribeVolumesRequest request, AsyncHandler<DescribeVolumesRequest,DescribeVolumesResult> asyncHandler)
AmazonFSxAsyncDescribes one or more Amazon FSx for NetApp ONTAP or Amazon FSx for OpenZFS volumes.
describeVolumesAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<DisassociateFileSystemAliasesResult> disassociateFileSystemAliasesAsync(DisassociateFileSystemAliasesRequest request)
AmazonFSxAsyncUse this action to disassociate, or remove, one or more Domain Name Service (DNS) aliases from an Amazon FSx for Windows File Server file system. If you attempt to disassociate a DNS alias that is not associated with the file system, Amazon FSx responds with a 400 Bad Request. For more information, see Working with DNS Aliases.
The system generated response showing the DNS aliases that Amazon FSx is attempting to disassociate from the file system. Use the API operation to monitor the status of the aliases Amazon FSx is disassociating with the file system.
disassociateFileSystemAliasesAsync in interface AmazonFSxAsyncrequest - The request object of DNS aliases to disassociate from an Amazon FSx for Windows File Server file system.public Future<DisassociateFileSystemAliasesResult> disassociateFileSystemAliasesAsync(DisassociateFileSystemAliasesRequest request, AsyncHandler<DisassociateFileSystemAliasesRequest,DisassociateFileSystemAliasesResult> asyncHandler)
AmazonFSxAsyncUse this action to disassociate, or remove, one or more Domain Name Service (DNS) aliases from an Amazon FSx for Windows File Server file system. If you attempt to disassociate a DNS alias that is not associated with the file system, Amazon FSx responds with a 400 Bad Request. For more information, see Working with DNS Aliases.
The system generated response showing the DNS aliases that Amazon FSx is attempting to disassociate from the file system. Use the API operation to monitor the status of the aliases Amazon FSx is disassociating with the file system.
disassociateFileSystemAliasesAsync in interface AmazonFSxAsyncrequest - The request object of DNS aliases to disassociate from an Amazon FSx for Windows File Server file system.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<ListTagsForResourceResult> listTagsForResourceAsync(ListTagsForResourceRequest request)
AmazonFSxAsyncLists tags for Amazon FSx resources.
When retrieving all tags, you can optionally specify the MaxResults parameter to limit the number of
tags in a response. If more tags remain, Amazon FSx returns a NextToken value in the response. In
this case, send a later request with the NextToken request parameter set to the value of
NextToken from the last response.
This action is used in an iterative process to retrieve a list of your tags. ListTagsForResource is
called first without a NextTokenvalue. Then the action continues to be called with the
NextToken parameter set to the value of the last NextToken value until a response has
no NextToken.
When using this action, keep the following in mind:
The implementation might return fewer than MaxResults file system descriptions while still including
a NextToken value.
The order of tags returned in the response of one ListTagsForResource call and the order of tags
returned across the responses of a multi-call iteration is unspecified.
listTagsForResourceAsync in interface AmazonFSxAsyncrequest - The request object for ListTagsForResource operation.public Future<ListTagsForResourceResult> listTagsForResourceAsync(ListTagsForResourceRequest request, AsyncHandler<ListTagsForResourceRequest,ListTagsForResourceResult> asyncHandler)
AmazonFSxAsyncLists tags for Amazon FSx resources.
When retrieving all tags, you can optionally specify the MaxResults parameter to limit the number of
tags in a response. If more tags remain, Amazon FSx returns a NextToken value in the response. In
this case, send a later request with the NextToken request parameter set to the value of
NextToken from the last response.
This action is used in an iterative process to retrieve a list of your tags. ListTagsForResource is
called first without a NextTokenvalue. Then the action continues to be called with the
NextToken parameter set to the value of the last NextToken value until a response has
no NextToken.
When using this action, keep the following in mind:
The implementation might return fewer than MaxResults file system descriptions while still including
a NextToken value.
The order of tags returned in the response of one ListTagsForResource call and the order of tags
returned across the responses of a multi-call iteration is unspecified.
listTagsForResourceAsync in interface AmazonFSxAsyncrequest - The request object for ListTagsForResource operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<ReleaseFileSystemNfsV3LocksResult> releaseFileSystemNfsV3LocksAsync(ReleaseFileSystemNfsV3LocksRequest request)
AmazonFSxAsyncReleases the file system lock from an Amazon FSx for OpenZFS file system.
releaseFileSystemNfsV3LocksAsync in interface AmazonFSxAsyncpublic Future<ReleaseFileSystemNfsV3LocksResult> releaseFileSystemNfsV3LocksAsync(ReleaseFileSystemNfsV3LocksRequest request, AsyncHandler<ReleaseFileSystemNfsV3LocksRequest,ReleaseFileSystemNfsV3LocksResult> asyncHandler)
AmazonFSxAsyncReleases the file system lock from an Amazon FSx for OpenZFS file system.
releaseFileSystemNfsV3LocksAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<RestoreVolumeFromSnapshotResult> restoreVolumeFromSnapshotAsync(RestoreVolumeFromSnapshotRequest request)
AmazonFSxAsyncReturns an Amazon FSx for OpenZFS volume to the state saved by the specified snapshot.
restoreVolumeFromSnapshotAsync in interface AmazonFSxAsyncpublic Future<RestoreVolumeFromSnapshotResult> restoreVolumeFromSnapshotAsync(RestoreVolumeFromSnapshotRequest request, AsyncHandler<RestoreVolumeFromSnapshotRequest,RestoreVolumeFromSnapshotResult> asyncHandler)
AmazonFSxAsyncReturns an Amazon FSx for OpenZFS volume to the state saved by the specified snapshot.
restoreVolumeFromSnapshotAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<TagResourceResult> tagResourceAsync(TagResourceRequest request)
AmazonFSxAsyncTags an Amazon FSx resource.
tagResourceAsync in interface AmazonFSxAsyncrequest - The request object for the TagResource operation.public Future<TagResourceResult> tagResourceAsync(TagResourceRequest request, AsyncHandler<TagResourceRequest,TagResourceResult> asyncHandler)
AmazonFSxAsyncTags an Amazon FSx resource.
tagResourceAsync in interface AmazonFSxAsyncrequest - The request object for the TagResource operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UntagResourceResult> untagResourceAsync(UntagResourceRequest request)
AmazonFSxAsyncThis action removes a tag from an Amazon FSx resource.
untagResourceAsync in interface AmazonFSxAsyncrequest - The request object for UntagResource action.public Future<UntagResourceResult> untagResourceAsync(UntagResourceRequest request, AsyncHandler<UntagResourceRequest,UntagResourceResult> asyncHandler)
AmazonFSxAsyncThis action removes a tag from an Amazon FSx resource.
untagResourceAsync in interface AmazonFSxAsyncrequest - The request object for UntagResource action.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdateDataRepositoryAssociationResult> updateDataRepositoryAssociationAsync(UpdateDataRepositoryAssociationRequest request)
AmazonFSxAsync
Updates the configuration of an existing data repository association on an Amazon FSx for Lustre file system.
Data repository associations are supported on all FSx for Lustre 2.12 and 2.15 file systems, excluding
scratch_1 deployment type.
updateDataRepositoryAssociationAsync in interface AmazonFSxAsyncpublic Future<UpdateDataRepositoryAssociationResult> updateDataRepositoryAssociationAsync(UpdateDataRepositoryAssociationRequest request, AsyncHandler<UpdateDataRepositoryAssociationRequest,UpdateDataRepositoryAssociationResult> asyncHandler)
AmazonFSxAsync
Updates the configuration of an existing data repository association on an Amazon FSx for Lustre file system.
Data repository associations are supported on all FSx for Lustre 2.12 and 2.15 file systems, excluding
scratch_1 deployment type.
updateDataRepositoryAssociationAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdateFileCacheResult> updateFileCacheAsync(UpdateFileCacheRequest request)
AmazonFSxAsyncUpdates the configuration of an existing Amazon File Cache resource. You can update multiple properties in a single request.
updateFileCacheAsync in interface AmazonFSxAsyncpublic Future<UpdateFileCacheResult> updateFileCacheAsync(UpdateFileCacheRequest request, AsyncHandler<UpdateFileCacheRequest,UpdateFileCacheResult> asyncHandler)
AmazonFSxAsyncUpdates the configuration of an existing Amazon File Cache resource. You can update multiple properties in a single request.
updateFileCacheAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdateFileSystemResult> updateFileSystemAsync(UpdateFileSystemRequest request)
AmazonFSxAsyncUse this operation to update the configuration of an existing Amazon FSx file system. You can update multiple properties in a single request.
For FSx for Windows File Server file systems, you can update the following properties:
AuditLogConfiguration
AutomaticBackupRetentionDays
DailyAutomaticBackupStartTime
SelfManagedActiveDirectoryConfiguration
StorageCapacity
StorageType
ThroughputCapacity
DiskIopsConfiguration
WeeklyMaintenanceStartTime
For FSx for Lustre file systems, you can update the following properties:
AutoImportPolicy
AutomaticBackupRetentionDays
DailyAutomaticBackupStartTime
DataCompressionType
LogConfiguration
LustreRootSquashConfiguration
StorageCapacity
WeeklyMaintenanceStartTime
For FSx for ONTAP file systems, you can update the following properties:
AddRouteTableIds
AutomaticBackupRetentionDays
DailyAutomaticBackupStartTime
DiskIopsConfiguration
FsxAdminPassword
RemoveRouteTableIds
StorageCapacity
ThroughputCapacity
WeeklyMaintenanceStartTime
For FSx for OpenZFS file systems, you can update the following properties:
AddRouteTableIds
AutomaticBackupRetentionDays
CopyTagsToBackups
CopyTagsToVolumes
DailyAutomaticBackupStartTime
DiskIopsConfiguration
RemoveRouteTableIds
StorageCapacity
ThroughputCapacity
WeeklyMaintenanceStartTime
updateFileSystemAsync in interface AmazonFSxAsyncrequest - The request object for the UpdateFileSystem operation.public Future<UpdateFileSystemResult> updateFileSystemAsync(UpdateFileSystemRequest request, AsyncHandler<UpdateFileSystemRequest,UpdateFileSystemResult> asyncHandler)
AmazonFSxAsyncUse this operation to update the configuration of an existing Amazon FSx file system. You can update multiple properties in a single request.
For FSx for Windows File Server file systems, you can update the following properties:
AuditLogConfiguration
AutomaticBackupRetentionDays
DailyAutomaticBackupStartTime
SelfManagedActiveDirectoryConfiguration
StorageCapacity
StorageType
ThroughputCapacity
DiskIopsConfiguration
WeeklyMaintenanceStartTime
For FSx for Lustre file systems, you can update the following properties:
AutoImportPolicy
AutomaticBackupRetentionDays
DailyAutomaticBackupStartTime
DataCompressionType
LogConfiguration
LustreRootSquashConfiguration
StorageCapacity
WeeklyMaintenanceStartTime
For FSx for ONTAP file systems, you can update the following properties:
AddRouteTableIds
AutomaticBackupRetentionDays
DailyAutomaticBackupStartTime
DiskIopsConfiguration
FsxAdminPassword
RemoveRouteTableIds
StorageCapacity
ThroughputCapacity
WeeklyMaintenanceStartTime
For FSx for OpenZFS file systems, you can update the following properties:
AddRouteTableIds
AutomaticBackupRetentionDays
CopyTagsToBackups
CopyTagsToVolumes
DailyAutomaticBackupStartTime
DiskIopsConfiguration
RemoveRouteTableIds
StorageCapacity
ThroughputCapacity
WeeklyMaintenanceStartTime
updateFileSystemAsync in interface AmazonFSxAsyncrequest - The request object for the UpdateFileSystem operation.asyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdateSnapshotResult> updateSnapshotAsync(UpdateSnapshotRequest request)
AmazonFSxAsyncUpdates the name of an Amazon FSx for OpenZFS snapshot.
updateSnapshotAsync in interface AmazonFSxAsyncpublic Future<UpdateSnapshotResult> updateSnapshotAsync(UpdateSnapshotRequest request, AsyncHandler<UpdateSnapshotRequest,UpdateSnapshotResult> asyncHandler)
AmazonFSxAsyncUpdates the name of an Amazon FSx for OpenZFS snapshot.
updateSnapshotAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdateStorageVirtualMachineResult> updateStorageVirtualMachineAsync(UpdateStorageVirtualMachineRequest request)
AmazonFSxAsyncUpdates an FSx for ONTAP storage virtual machine (SVM).
updateStorageVirtualMachineAsync in interface AmazonFSxAsyncpublic Future<UpdateStorageVirtualMachineResult> updateStorageVirtualMachineAsync(UpdateStorageVirtualMachineRequest request, AsyncHandler<UpdateStorageVirtualMachineRequest,UpdateStorageVirtualMachineResult> asyncHandler)
AmazonFSxAsyncUpdates an FSx for ONTAP storage virtual machine (SVM).
updateStorageVirtualMachineAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public Future<UpdateVolumeResult> updateVolumeAsync(UpdateVolumeRequest request)
AmazonFSxAsyncUpdates the configuration of an Amazon FSx for NetApp ONTAP or Amazon FSx for OpenZFS volume.
updateVolumeAsync in interface AmazonFSxAsyncpublic Future<UpdateVolumeResult> updateVolumeAsync(UpdateVolumeRequest request, AsyncHandler<UpdateVolumeRequest,UpdateVolumeResult> asyncHandler)
AmazonFSxAsyncUpdates the configuration of an Amazon FSx for NetApp ONTAP or Amazon FSx for OpenZFS volume.
updateVolumeAsync in interface AmazonFSxAsyncasyncHandler - Asynchronous callback handler for events in the lifecycle of the request. Users can provide an
implementation of the callback methods in this interface to receive notification of successful or
unsuccessful completion of the operation.public void shutdown()
getExecutorService().shutdown() followed by getExecutorService().awaitTermination() prior to
calling this method.shutdown in interface AmazonFSxshutdown in class AmazonFSxClient