Weitere AWS SDK-Beispiele sind im Repo AWS Doc SDK Examples
Die vorliegende Übersetzung wurde maschinell erstellt. Im Falle eines Konflikts oder eines Widerspruchs zwischen dieser übersetzten Fassung und der englischen Fassung (einschließlich infolge von Verzögerungen bei der Übersetzung) ist die englische Fassung maßgeblich.
Amazon SES SES-Beispiele mit SDK for Python (Boto3)
Die folgenden Codebeispiele zeigen Ihnen, wie Sie mithilfe von Amazon SES Aktionen ausführen und allgemeine Szenarien implementieren. AWS SDK for Python (Boto3)
Aktionen sind Codeauszüge aus größeren Programmen und müssen im Kontext ausgeführt werden. Während Aktionen Ihnen zeigen, wie Sie einzelne Service-Funktionen aufrufen, können Sie Aktionen im Kontext der zugehörigen Szenarios anzeigen.
Szenarien sind Code-Beispiele, die Ihnen zeigen, wie Sie bestimmte Aufgaben ausführen, indem Sie mehrere Funktionen innerhalb eines Services aufrufen oder mit anderen AWS-Services kombinieren.
Jedes Beispiel enthält einen Link zum vollständigen Quellcode, in dem Sie Anweisungen zur Einrichtung und Ausführung des Codes im Kontext finden.
Aktionen
Das folgende Codebeispiel zeigt die VerwendungCreateReceiptFilter.
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesReceiptHandler: """Encapsulates Amazon SES receipt handling functions.""" def __init__(self, ses_client, s3_resource): """ :param ses_client: A Boto3 Amazon SES client. :param s3_resource: A Boto3 Amazon S3 resource. """ self.ses_client = ses_client self.s3_resource = s3_resource def create_receipt_filter(self, filter_name, ip_address_or_range, allow): """ Creates a filter that allows or blocks incoming mail from an IP address or range. :param filter_name: The name to give the filter. :param ip_address_or_range: The IP address or range to block or allow. :param allow: When True, incoming mail is allowed from the specified IP address or range; otherwise, it is blocked. """ try: policy = "Allow" if allow else "Block" self.ses_client.create_receipt_filter( Filter={ "Name": filter_name, "IpFilter": {"Cidr": ip_address_or_range, "Policy": policy}, } ) logger.info( "Created receipt filter %s to %s IP of %s.", filter_name, policy, ip_address_or_range, ) except ClientError: logger.exception("Couldn't create receipt filter %s.", filter_name) raise-
Einzelheiten zur API finden Sie CreateReceiptFilterin AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. CreateReceiptRule
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. Erstellen Sie einen Amazon-S3-Bucket, in dem Amazon SES Kopien eingehender E-Mails ablegen und eine Regel erstellen kann, die eingehende E-Mails für eine bestimmte Empfängerliste in den Bucket kopiert.
class SesReceiptHandler: """Encapsulates Amazon SES receipt handling functions.""" def __init__(self, ses_client, s3_resource): """ :param ses_client: A Boto3 Amazon SES client. :param s3_resource: A Boto3 Amazon S3 resource. """ self.ses_client = ses_client self.s3_resource = s3_resource def create_bucket_for_copy(self, bucket_name): """ Creates a bucket that can receive copies of emails from Amazon SES. This includes adding a policy to the bucket that grants Amazon SES permission to put objects in the bucket. :param bucket_name: The name of the bucket to create. :return: The newly created bucket. """ allow_ses_put_policy = { "Version": "2012-10-17", "Statement": [ { "Sid": "AllowSESPut", "Effect": "Allow", "Principal": {"Service": "ses.amazonaws.com"}, "Action": "s3:PutObject", "Resource": f"arn:aws:s3:::{bucket_name}/*", } ], } bucket = None try: bucket = self.s3_resource.create_bucket( Bucket=bucket_name, CreateBucketConfiguration={ "LocationConstraint": self.s3_resource.meta.client.meta.region_name }, ) bucket.wait_until_exists() bucket.Policy().put(Policy=json.dumps(allow_ses_put_policy)) logger.info("Created bucket %s to receive copies of emails.", bucket_name) except ClientError: logger.exception("Couldn't create bucket to receive copies of emails.") if bucket is not None: bucket.delete() raise else: return bucket def create_s3_copy_rule( self, rule_set_name, rule_name, recipients, bucket_name, prefix ): """ Creates a rule so that all emails received by the specified recipients are copied to an Amazon S3 bucket. :param rule_set_name: The name of a previously created rule set to contain this rule. :param rule_name: The name to give the rule. :param recipients: When an email is received by one of these recipients, it is copied to the Amazon S3 bucket. :param bucket_name: The name of the bucket to receive email copies. This bucket must allow Amazon SES to put objects into it. :param prefix: An object key prefix to give the emails copied to the bucket. """ try: self.ses_client.create_receipt_rule( RuleSetName=rule_set_name, Rule={ "Name": rule_name, "Enabled": True, "Recipients": recipients, "Actions": [ { "S3Action": { "BucketName": bucket_name, "ObjectKeyPrefix": prefix, } } ], }, ) logger.info( "Created rule %s to copy mail received by %s to bucket %s.", rule_name, recipients, bucket_name, ) except ClientError: logger.exception("Couldn't create rule %s.", rule_name) raise-
Einzelheiten zur API finden Sie CreateReceiptRulein AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. CreateReceiptRuleSet
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesReceiptHandler: """Encapsulates Amazon SES receipt handling functions.""" def __init__(self, ses_client, s3_resource): """ :param ses_client: A Boto3 Amazon SES client. :param s3_resource: A Boto3 Amazon S3 resource. """ self.ses_client = ses_client self.s3_resource = s3_resource def create_receipt_rule_set(self, rule_set_name): """ Creates an empty rule set. Rule sets contain individual rules and can be used to organize rules. :param rule_set_name: The name to give the rule set. """ try: self.ses_client.create_receipt_rule_set(RuleSetName=rule_set_name) logger.info("Created receipt rule set %s.", rule_set_name) except ClientError: logger.exception("Couldn't create receipt rule set %s.", rule_set_name) raise-
Einzelheiten zur API finden Sie CreateReceiptRuleSetin AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. CreateTemplate
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesTemplate: """Encapsulates Amazon SES template functions.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client self.template = None self.template_tags = set() def _extract_tags(self, subject, text, html): """ Extracts tags from a template as a set of unique values. :param subject: The subject of the email. :param text: The text version of the email. :param html: The html version of the email. """ self.template_tags = set(re.findall(TEMPLATE_REGEX, subject + text + html)) logger.info("Extracted template tags: %s", self.template_tags) def create_template(self, name, subject, text, html): """ Creates an email template. :param name: The name of the template. :param subject: The subject of the email. :param text: The plain text version of the email. :param html: The HTML version of the email. """ try: template = { "TemplateName": name, "SubjectPart": subject, "TextPart": text, "HtmlPart": html, } self.ses_client.create_template(Template=template) logger.info("Created template %s.", name) self.template = template self._extract_tags(subject, text, html) except ClientError: logger.exception("Couldn't create template %s.", name) raise-
Einzelheiten zur API finden Sie CreateTemplatein AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. DeleteIdentity
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesIdentity: """Encapsulates Amazon SES identity functions.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client def delete_identity(self, identity): """ Deletes an identity. :param identity: The identity to remove. """ try: self.ses_client.delete_identity(Identity=identity) logger.info("Deleted identity %s.", identity) except ClientError: logger.exception("Couldn't delete identity %s.", identity) raise-
Einzelheiten zur API finden Sie DeleteIdentityin AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. DeleteReceiptFilter
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesReceiptHandler: """Encapsulates Amazon SES receipt handling functions.""" def __init__(self, ses_client, s3_resource): """ :param ses_client: A Boto3 Amazon SES client. :param s3_resource: A Boto3 Amazon S3 resource. """ self.ses_client = ses_client self.s3_resource = s3_resource def delete_receipt_filter(self, filter_name): """ Deletes a receipt filter. :param filter_name: The name of the filter to delete. """ try: self.ses_client.delete_receipt_filter(FilterName=filter_name) logger.info("Deleted receipt filter %s.", filter_name) except ClientError: logger.exception("Couldn't delete receipt filter %s.", filter_name) raise-
Einzelheiten zur API finden Sie DeleteReceiptFilterin AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. DeleteReceiptRule
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesReceiptHandler: """Encapsulates Amazon SES receipt handling functions.""" def __init__(self, ses_client, s3_resource): """ :param ses_client: A Boto3 Amazon SES client. :param s3_resource: A Boto3 Amazon S3 resource. """ self.ses_client = ses_client self.s3_resource = s3_resource def delete_receipt_rule(self, rule_set_name, rule_name): """ Deletes a rule. :param rule_set_name: The rule set that contains the rule to delete. :param rule_name: The rule to delete. """ try: self.ses_client.delete_receipt_rule( RuleSetName=rule_set_name, RuleName=rule_name ) logger.info("Removed rule %s from rule set %s.", rule_name, rule_set_name) except ClientError: logger.exception( "Couldn't remove rule %s from rule set %s.", rule_name, rule_set_name ) raise-
Einzelheiten zur API finden Sie DeleteReceiptRulein AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. DeleteReceiptRuleSet
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesReceiptHandler: """Encapsulates Amazon SES receipt handling functions.""" def __init__(self, ses_client, s3_resource): """ :param ses_client: A Boto3 Amazon SES client. :param s3_resource: A Boto3 Amazon S3 resource. """ self.ses_client = ses_client self.s3_resource = s3_resource def delete_receipt_rule_set(self, rule_set_name): """ Deletes a rule set. When a rule set is deleted, all of the rules it contains are also deleted. :param rule_set_name: The name of the rule set to delete. """ try: self.ses_client.delete_receipt_rule_set(RuleSetName=rule_set_name) logger.info("Deleted rule set %s.", rule_set_name) except ClientError: logger.exception("Couldn't delete rule set %s.", rule_set_name) raise-
Einzelheiten zur API finden Sie DeleteReceiptRuleSetin AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. DeleteTemplate
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesTemplate: """Encapsulates Amazon SES template functions.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client self.template = None self.template_tags = set() def _extract_tags(self, subject, text, html): """ Extracts tags from a template as a set of unique values. :param subject: The subject of the email. :param text: The text version of the email. :param html: The html version of the email. """ self.template_tags = set(re.findall(TEMPLATE_REGEX, subject + text + html)) logger.info("Extracted template tags: %s", self.template_tags) def delete_template(self): """ Deletes an email template. """ try: self.ses_client.delete_template(TemplateName=self.template["TemplateName"]) logger.info("Deleted template %s.", self.template["TemplateName"]) self.template = None self.template_tags = None except ClientError: logger.exception( "Couldn't delete template %s.", self.template["TemplateName"] ) raise-
Einzelheiten zur API finden Sie DeleteTemplatein AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. DescribeReceiptRuleSet
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesReceiptHandler: """Encapsulates Amazon SES receipt handling functions.""" def __init__(self, ses_client, s3_resource): """ :param ses_client: A Boto3 Amazon SES client. :param s3_resource: A Boto3 Amazon S3 resource. """ self.ses_client = ses_client self.s3_resource = s3_resource def describe_receipt_rule_set(self, rule_set_name): """ Gets data about a rule set. :param rule_set_name: The name of the rule set to retrieve. :return: Data about the rule set. """ try: response = self.ses_client.describe_receipt_rule_set( RuleSetName=rule_set_name ) logger.info("Got data for rule set %s.", rule_set_name) except ClientError: logger.exception("Couldn't get data for rule set %s.", rule_set_name) raise else: return response-
Einzelheiten zur API finden Sie DescribeReceiptRuleSetin AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. GetIdentityVerificationAttributes
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesIdentity: """Encapsulates Amazon SES identity functions.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client def get_identity_status(self, identity): """ Gets the status of an identity. This can be used to discover whether an identity has been successfully verified. :param identity: The identity to query. :return: The status of the identity. """ try: response = self.ses_client.get_identity_verification_attributes( Identities=[identity] ) status = response["VerificationAttributes"].get( identity, {"VerificationStatus": "NotFound"} )["VerificationStatus"] logger.info("Got status of %s for %s.", status, identity) except ClientError: logger.exception("Couldn't get status for %s.", identity) raise else: return status-
Einzelheiten zur API finden Sie GetIdentityVerificationAttributesin AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. GetTemplate
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesTemplate: """Encapsulates Amazon SES template functions.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client self.template = None self.template_tags = set() def _extract_tags(self, subject, text, html): """ Extracts tags from a template as a set of unique values. :param subject: The subject of the email. :param text: The text version of the email. :param html: The html version of the email. """ self.template_tags = set(re.findall(TEMPLATE_REGEX, subject + text + html)) logger.info("Extracted template tags: %s", self.template_tags) def get_template(self, name): """ Gets a previously created email template. :param name: The name of the template to retrieve. :return: The retrieved email template. """ try: response = self.ses_client.get_template(TemplateName=name) self.template = response["Template"] logger.info("Got template %s.", name) self._extract_tags( self.template["SubjectPart"], self.template["TextPart"], self.template["HtmlPart"], ) except ClientError: logger.exception("Couldn't get template %s.", name) raise else: return self.template-
Einzelheiten zur API finden Sie GetTemplatein AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. ListIdentities
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesIdentity: """Encapsulates Amazon SES identity functions.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client def list_identities(self, identity_type, max_items): """ Gets the identities of the specified type for the current account. :param identity_type: The type of identity to retrieve, such as EmailAddress. :param max_items: The maximum number of identities to retrieve. :return: The list of retrieved identities. """ try: response = self.ses_client.list_identities( IdentityType=identity_type, MaxItems=max_items ) identities = response["Identities"] logger.info("Got %s identities for the current account.", len(identities)) except ClientError: logger.exception("Couldn't list identities for the current account.") raise else: return identities-
Einzelheiten zur API finden Sie ListIdentitiesin AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. ListReceiptFilters
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesReceiptHandler: """Encapsulates Amazon SES receipt handling functions.""" def __init__(self, ses_client, s3_resource): """ :param ses_client: A Boto3 Amazon SES client. :param s3_resource: A Boto3 Amazon S3 resource. """ self.ses_client = ses_client self.s3_resource = s3_resource def list_receipt_filters(self): """ Gets the list of receipt filters for the current account. :return: The list of receipt filters. """ try: response = self.ses_client.list_receipt_filters() filters = response["Filters"] logger.info("Got %s receipt filters.", len(filters)) except ClientError: logger.exception("Couldn't get receipt filters.") raise else: return filters-
Einzelheiten zur API finden Sie ListReceiptFiltersin AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. ListTemplates
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesTemplate: """Encapsulates Amazon SES template functions.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client self.template = None self.template_tags = set() def _extract_tags(self, subject, text, html): """ Extracts tags from a template as a set of unique values. :param subject: The subject of the email. :param text: The text version of the email. :param html: The html version of the email. """ self.template_tags = set(re.findall(TEMPLATE_REGEX, subject + text + html)) logger.info("Extracted template tags: %s", self.template_tags) def list_templates(self): """ Gets a list of all email templates for the current account. :return: The list of retrieved email templates. """ try: response = self.ses_client.list_templates() templates = response["TemplatesMetadata"] logger.info("Got %s templates.", len(templates)) except ClientError: logger.exception("Couldn't get templates.") raise else: return templates-
Einzelheiten zur API finden Sie ListTemplatesin AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. SendEmail
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesMailSender: """Encapsulates functions to send emails with Amazon SES.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client def send_email(self, source, destination, subject, text, html, reply_tos=None): """ Sends an email. Note: If your account is in the Amazon SES sandbox, the source and destination email accounts must both be verified. :param source: The source email account. :param destination: The destination email account. :param subject: The subject of the email. :param text: The plain text version of the body of the email. :param html: The HTML version of the body of the email. :param reply_tos: Email accounts that will receive a reply if the recipient replies to the message. :return: The ID of the message, assigned by Amazon SES. """ send_args = { "Source": source, "Destination": destination.to_service_format(), "Message": { "Subject": {"Data": subject}, "Body": {"Text": {"Data": text}, "Html": {"Data": html}}, }, } if reply_tos is not None: send_args["ReplyToAddresses"] = reply_tos try: response = self.ses_client.send_email(**send_args) message_id = response["MessageId"] logger.info( "Sent mail %s from %s to %s.", message_id, source, destination.tos ) except ClientError: logger.exception( "Couldn't send mail from %s to %s.", source, destination.tos ) raise else: return message_id-
Einzelheiten zur API finden Sie SendEmailin AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. SendTemplatedEmail
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesMailSender: """Encapsulates functions to send emails with Amazon SES.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client def send_templated_email( self, source, destination, template_name, template_data, reply_tos=None ): """ Sends an email based on a template. A template contains replaceable tags each enclosed in two curly braces, such as {{name}}. The template data passed in this function contains key-value pairs that define the values to insert in place of the template tags. Note: If your account is in the Amazon SES sandbox, the source and destination email accounts must both be verified. :param source: The source email account. :param destination: The destination email account. :param template_name: The name of a previously created template. :param template_data: JSON-formatted key-value pairs of replacement values that are inserted in the template before it is sent. :return: The ID of the message, assigned by Amazon SES. """ send_args = { "Source": source, "Destination": destination.to_service_format(), "Template": template_name, "TemplateData": json.dumps(template_data), } if reply_tos is not None: send_args["ReplyToAddresses"] = reply_tos try: response = self.ses_client.send_templated_email(**send_args) message_id = response["MessageId"] logger.info( "Sent templated mail %s from %s to %s.", message_id, source, destination.tos, ) except ClientError: logger.exception( "Couldn't send templated mail from %s to %s.", source, destination.tos ) raise else: return message_id-
Einzelheiten zur API finden Sie SendTemplatedEmailin AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. UpdateTemplate
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesTemplate: """Encapsulates Amazon SES template functions.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client self.template = None self.template_tags = set() def _extract_tags(self, subject, text, html): """ Extracts tags from a template as a set of unique values. :param subject: The subject of the email. :param text: The text version of the email. :param html: The html version of the email. """ self.template_tags = set(re.findall(TEMPLATE_REGEX, subject + text + html)) logger.info("Extracted template tags: %s", self.template_tags) def update_template(self, name, subject, text, html): """ Updates a previously created email template. :param name: The name of the template. :param subject: The subject of the email. :param text: The plain text version of the email. :param html: The HTML version of the email. """ try: template = { "TemplateName": name, "SubjectPart": subject, "TextPart": text, "HtmlPart": html, } self.ses_client.update_template(Template=template) logger.info("Updated template %s.", name) self.template = template self._extract_tags(subject, text, html) except ClientError: logger.exception("Couldn't update template %s.", name) raise-
Einzelheiten zur API finden Sie UpdateTemplatein AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. VerifyDomainIdentity
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesIdentity: """Encapsulates Amazon SES identity functions.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client def verify_domain_identity(self, domain_name): """ Starts verification of a domain identity. To complete verification, you must create a TXT record with a specific format through your DNS provider. For more information, see *Verifying a domain with Amazon SES* in the Amazon SES documentation: https://docs.aws.amazon.com/ses/latest/DeveloperGuide/verify-domain-procedure.html :param domain_name: The name of the domain to verify. :return: The token to include in the TXT record with your DNS provider. """ try: response = self.ses_client.verify_domain_identity(Domain=domain_name) token = response["VerificationToken"] logger.info("Got domain verification token for %s.", domain_name) except ClientError: logger.exception("Couldn't verify domain %s.", domain_name) raise else: return token-
Einzelheiten zur API finden Sie VerifyDomainIdentityin AWS SDK for Python (Boto3) API Reference.
-
Das folgende Codebeispiel zeigt die Verwendung. VerifyEmailIdentity
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. class SesIdentity: """Encapsulates Amazon SES identity functions.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client def verify_email_identity(self, email_address): """ Starts verification of an email identity. This function causes an email to be sent to the specified email address from Amazon SES. To complete verification, follow the instructions in the email. :param email_address: The email address to verify. """ try: self.ses_client.verify_email_identity(EmailAddress=email_address) logger.info("Started verification of %s.", email_address) except ClientError: logger.exception("Couldn't start verification of %s.", email_address) raise-
Einzelheiten zur API finden Sie VerifyEmailIdentityin AWS SDK for Python (Boto3) API Reference.
-
Szenarien
Das folgende Codebeispiel zeigt, wie Amazon SES SES-E-Mail- und Domainidentitäten von einer AWS Region in eine andere kopiert werden. Wenn Domänenidentitäten von Route 53 verwaltet werden, werden Überprüfungsdatensätze in die Domäne für die Zielregion kopiert.
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu. GitHub Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. import argparse import json import logging from pprint import pprint import boto3 from botocore.exceptions import ClientError logger = logging.getLogger(__name__) def get_identities(ses_client): """ Gets the identities for the current Region. The Region is specified in the Boto3 Amazon SES client object. :param ses_client: A Boto3 Amazon SES client. :return: The list of email identities and the list of domain identities. """ email_identities = [] domain_identities = [] try: identity_paginator = ses_client.get_paginator("list_identities") identity_iterator = identity_paginator.paginate( PaginationConfig={"PageSize": 20} ) for identity_page in identity_iterator: for identity in identity_page["Identities"]: if "@" in identity: email_identities.append(identity) else: domain_identities.append(identity) logger.info( "Found %s email and %s domain identities.", len(email_identities), len(domain_identities), ) except ClientError: logger.exception("Couldn't get identities.") raise else: return email_identities, domain_identities def verify_emails(email_list, ses_client): """ Starts verification of a list of email addresses. Verification causes an email to be sent to each address. To complete verification, the recipient must follow the instructions in the email. :param email_list: The list of email addresses to verify. :param ses_client: A Boto3 Amazon SES client. :return: The list of emails that were successfully submitted for verification. """ verified_emails = [] for email in email_list: try: ses_client.verify_email_identity(EmailAddress=email) verified_emails.append(email) logger.info("Started verification of %s.", email) except ClientError: logger.warning("Couldn't start verification of %s.", email) return verified_emails def verify_domains(domain_list, ses_client): """ Starts verification for a list of domain identities. This returns a token for each domain, which must be registered as a TXT record with the DNS provider for the domain. :param domain_list: The list of domains to verify. :param ses_client: A Boto3 Amazon SES client. :return: The generated domain tokens to use to completed verification. """ domain_tokens = {} for domain in domain_list: try: response = ses_client.verify_domain_identity(Domain=domain) token = response["VerificationToken"] domain_tokens[domain] = token logger.info("Got verification token %s for domain %s.", token, domain) except ClientError: logger.warning("Couldn't get verification token for domain %s.", domain) return domain_tokens def get_hosted_zones(route53_client): """ Gets the Amazon Route 53 hosted zones for the current account. :param route53_client: A Boto3 Route 53 client. :return: The list of hosted zones. """ zones = [] try: zone_paginator = route53_client.get_paginator("list_hosted_zones") zone_iterator = zone_paginator.paginate(PaginationConfig={"PageSize": 20}) zones = [ zone for zone_page in zone_iterator for zone in zone_page["HostedZones"] ] logger.info("Found %s hosted zones.", len(zones)) except ClientError: logger.warning("Couldn't get hosted zones.") return zones def find_domain_zone_matches(domains, zones): """ Finds matches between Amazon SES verified domains and Route 53 hosted zones. Subdomain matches are taken when found, otherwise root domain matches are taken. :param domains: The list of domains to match. :param zones: The list of hosted zones to match. :return: The set of matched domain-zone pairs. When a match is not found, the domain is included in the set with a zone value of None. """ domain_zones = {} for domain in domains: domain_zones[domain] = None # Start at the most specific sub-domain and walk up to the root domain until a # zone match is found. domain_split = domain.split(".") for index in range(0, len(domain_split) - 1): sub_domain = ".".join(domain_split[index:]) for zone in zones: # Normalize the zone name from Route 53 by removing the trailing '.'. zone_name = zone["Name"][:-1] if sub_domain == zone_name: domain_zones[domain] = zone break if domain_zones[domain] is not None: break return domain_zones def add_route53_verification_record(domain, token, zone, route53_client): """ Adds a domain verification TXT record to the specified Route 53 hosted zone. When a TXT record already exists in the hosted zone for the specified domain, the existing values are preserved and the new token is added to the list. :param domain: The domain to add. :param token: The verification token for the domain. :param zone: The hosted zone where the domain verification record is added. :param route53_client: A Boto3 Route 53 client. """ domain_token_record_set_name = f"_amazonses.{domain}" record_set_paginator = route53_client.get_paginator("list_resource_record_sets") record_set_iterator = record_set_paginator.paginate( HostedZoneId=zone["Id"], PaginationConfig={"PageSize": 20} ) records = [] for record_set_page in record_set_iterator: try: txt_record_set = next( record_set for record_set in record_set_page["ResourceRecordSets"] if record_set["Name"][:-1] == domain_token_record_set_name and record_set["Type"] == "TXT" ) records = txt_record_set["ResourceRecords"] logger.info( "Existing TXT record found in set %s for zone %s.", domain_token_record_set_name, zone["Name"], ) break except StopIteration: pass records.append({"Value": json.dumps(token)}) changes = [ { "Action": "UPSERT", "ResourceRecordSet": { "Name": domain_token_record_set_name, "Type": "TXT", "TTL": 1800, "ResourceRecords": records, }, } ] try: route53_client.change_resource_record_sets( HostedZoneId=zone["Id"], ChangeBatch={"Changes": changes} ) logger.info( "Created or updated the TXT record in set %s for zone %s.", domain_token_record_set_name, zone["Name"], ) except ClientError as err: logger.warning( "Got error %s. Couldn't create or update the TXT record for zone %s.", err.response["Error"]["Code"], zone["Name"], ) def generate_dkim_tokens(domain, ses_client): """ Generates DKIM tokens for a domain. These must be added as CNAME records to the DNS provider for the domain. :param domain: The domain to generate tokens for. :param ses_client: A Boto3 Amazon SES client. :return: The list of generated DKIM tokens. """ dkim_tokens = [] try: dkim_tokens = ses_client.verify_domain_dkim(Domain=domain)["DkimTokens"] logger.info("Generated %s DKIM tokens for domain %s.", len(dkim_tokens), domain) except ClientError: logger.warning("Couldn't generate DKIM tokens for domain %s.", domain) return dkim_tokens def add_dkim_domain_tokens(hosted_zone, domain, tokens, route53_client): """ Adds DKIM domain token CNAME records to a Route 53 hosted zone. :param hosted_zone: The hosted zone where the records are added. :param domain: The domain to add. :param tokens: The DKIM tokens for the domain to add. :param route53_client: A Boto3 Route 53 client. """ try: changes = [ { "Action": "UPSERT", "ResourceRecordSet": { "Name": f"{token}._domainkey.{domain}", "Type": "CNAME", "TTL": 1800, "ResourceRecords": [{"Value": f"{token}.dkim.amazonses.com"}], }, } for token in tokens ] route53_client.change_resource_record_sets( HostedZoneId=hosted_zone["Id"], ChangeBatch={"Changes": changes} ) logger.info( "Added %s DKIM CNAME records to %s in zone %s.", len(tokens), domain, hosted_zone["Name"], ) except ClientError: logger.warning( "Couldn't add DKIM CNAME records for %s to zone %s.", domain, hosted_zone["Name"], ) def configure_sns_topics(identity, topics, ses_client): """ Configures Amazon Simple Notification Service (Amazon SNS) notifications for an identity. The Amazon SNS topics must already exist. :param identity: The identity to configure. :param topics: The list of topics to configure. The choices are Bounce, Delivery, or Complaint. :param ses_client: A Boto3 Amazon SES client. """ for topic in topics: topic_arn = input( f"Enter the Amazon Resource Name (ARN) of the {topic} topic or press " f"Enter to skip: " ) if topic_arn != "": try: ses_client.set_identity_notification_topic( Identity=identity, NotificationType=topic, SnsTopic=topic_arn ) logger.info("Configured %s for %s notifications.", identity, topic) except ClientError: logger.warning( "Couldn't configure %s for %s notifications.", identity, topic ) def replicate(source_client, destination_client, route53_client): logging.basicConfig(level=logging.INFO, format="%(levelname)s: %(message)s") print("-" * 88) print( f"Replicating Amazon SES identities and other configuration from " f"{source_client.meta.region_name} to {destination_client.meta.region_name}." ) print("-" * 88) print(f"Retrieving identities from {source_client.meta.region_name}.") source_emails, source_domains = get_identities(source_client) print("Email addresses found:") print(*source_emails) print("Domains found:") print(*source_domains) print("Starting verification for email identities.") dest_emails = verify_emails(source_emails, destination_client) print("Getting domain tokens for domain identities.") dest_domain_tokens = verify_domains(source_domains, destination_client) # Get Route 53 hosted zones and match them with Amazon SES domains. answer = input( "Is the DNS configuration for your domains managed by Amazon Route 53 (y/n)? " ) use_route53 = answer.lower() == "y" hosted_zones = get_hosted_zones(route53_client) if use_route53 else [] if use_route53: print("Adding or updating Route 53 TXT records for your domains.") domain_zones = find_domain_zone_matches(dest_domain_tokens.keys(), hosted_zones) for domain in domain_zones: add_route53_verification_record( domain, dest_domain_tokens[domain], domain_zones[domain], route53_client ) else: print( "Use these verification tokens to create TXT records through your DNS " "provider:" ) pprint(dest_domain_tokens) answer = input("Do you want to configure DKIM signing for your identities (y/n)? ") if answer.lower() == "y": # Build a set of unique domains from email and domain identities. domains = {email.split("@")[1] for email in dest_emails} domains.update(dest_domain_tokens) domain_zones = find_domain_zone_matches(domains, hosted_zones) for domain, zone in domain_zones.items(): answer = input( f"Do you want to configure DKIM signing for {domain} (y/n)? " ) if answer.lower() == "y": dkim_tokens = generate_dkim_tokens(domain, destination_client) if use_route53 and zone is not None: add_dkim_domain_tokens(zone, domain, dkim_tokens, route53_client) else: print( "Add the following DKIM tokens as CNAME records through your " "DNS provider:" ) print(*dkim_tokens, sep="\n") answer = input( "Do you want to configure Amazon SNS notifications for your identities (y/n)? " ) if answer.lower() == "y": for identity in dest_emails + list(dest_domain_tokens.keys()): answer = input( f"Do you want to configure Amazon SNS topics for {identity} (y/n)? " ) if answer.lower() == "y": configure_sns_topics( identity, ["Bounce", "Delivery", "Complaint"], destination_client ) print(f"Replication complete for {destination_client.meta.region_name}.") print("-" * 88) def main(): boto3_session = boto3.Session() ses_regions = boto3_session.get_available_regions("ses") parser = argparse.ArgumentParser( description="Copies email address and domain identities from one AWS Region to " "another. Optionally adds records for domain verification and DKIM " "signing to domains that are managed by Amazon Route 53, " "and sets up Amazon SNS notifications for events of interest." ) parser.add_argument( "source_region", choices=ses_regions, help="The region to copy from." ) parser.add_argument( "destination_region", choices=ses_regions, help="The region to copy to." ) args = parser.parse_args() source_client = boto3.client("ses", region_name=args.source_region) destination_client = boto3.client("ses", region_name=args.destination_region) route53_client = boto3.client("route53") replicate(source_client, destination_client, route53_client) if __name__ == "__main__": main()-
Weitere API-Informationen finden Sie in den folgenden Themen der API-Referenz zum AWS -SDK für Python (Boto3).
-
Das folgende Codebeispiel zeigt, wie Sie eine Webanwendung erstellen, die Arbeitselemente in einer Amazon DynamoDB-Tabelle verfolgt und Amazon Simple Email Service (Amazon SES) zum Senden von Berichten verwendet.
- SDK für Python (Boto3)
-
Zeigt, wie Sie mithilfe von Amazon Simple Email Service (Amazon SES) einen REST-Service erstellen, der Arbeitselemente in Amazon DynamoDB nachverfolgt und Berichte per E-Mail versendet. AWS SDK for Python (Boto3) In diesem Beispiel wird das Flask-Web-Framework für das HTTP-Routing verwendet und in eine React-Webseite integriert, um eine voll funktionsfähige Webanwendung zu präsentieren.
Erstellen Sie einen Flask-REST-Service, der sich in integrieren lässt. AWS-Services
Lesen, schreiben und aktualisieren Sie Arbeitsaufgaben, die in einer DynamoDB-Tabelle gespeichert sind.
Verwenden Sie Amazon SES, um E-Mail-Berichte über Arbeitsaufgaben zu senden.
Den vollständigen Quellcode und Anweisungen zur Einrichtung und Ausführung finden Sie im vollständigen Beispiel im AWS Code Examples Repository
unter GitHub. In diesem Beispiel verwendete Dienste
DynamoDB
Amazon SES
Das folgende Codebeispiel zeigt, wie Sie eine Webanwendung erstellen, die Arbeitsaufgaben in einer serverlosen Amazon Aurora Aurora-Datenbank verfolgt und Amazon Simple Email Service (Amazon SES) zum Senden von Berichten verwendet.
- SDK für Python (Boto3)
-
Zeigt, wie Sie mithilfe von Amazon Simple Email Service (Amazon SES) einen REST-Service erstellen, der Arbeitselemente in einer Amazon Aurora Aurora-Serverless-Datenbank nachverfolgt und Berichte per E-Mail versendet. AWS SDK for Python (Boto3) In diesem Beispiel wird das Flask-Web-Framework für das HTTP-Routing verwendet und in eine React-Webseite integriert, um eine voll funktionsfähige Webanwendung zu präsentieren.
Erstellen Sie einen Flask-REST-Service, der sich in integrieren lässt. AWS-Services
Lesen, schreiben und aktualisieren Sie Arbeitsaufgaben, die in einer Aurora-Serverless-Datenbank gespeichert sind.
Erstellen Sie ein AWS Secrets Manager Geheimnis, das Datenbankanmeldedaten enthält, und verwenden Sie es, um Aufrufe an die Datenbank zu authentifizieren.
Verwenden Sie Amazon SES, um E-Mail-Berichte über Arbeitsaufgaben zu senden.
Den vollständigen Quellcode und Anweisungen zur Einrichtung und Ausführung finden Sie im vollständigen Beispiel unter GitHub
. In diesem Beispiel verwendete Dienste
Aurora
Amazon RDS
Amazon RDS Data Service
Amazon SES
Das folgende Codebeispiel zeigt, wie Sie eine App erstellen, die Amazon Rekognition verwendet, um Objekte nach Kategorien in Bildern zu erkennen.
- SDK für Python (Boto3)
-
Zeigt Ihnen, wie Sie mit AWS SDK for Python (Boto3) dem eine Webanwendung erstellen, mit der Sie Folgendes tun können:
Laden Sie Fotos in einen Bucket von Amazon Simple Storage Service (Amazon S3) hoch.
Verwenden Sie Amazon Rekognition, um die Fotos zu analysieren und zu markieren.
Verwenden Sie Amazon Simple Email Service (Amazon SES), um E-Mail-Berichte von Bildanalysen zu senden.
Dieses Beispiel enthält zwei Hauptkomponenten: eine eingeschriebene Webseite JavaScript , die mit React erstellt wurde, und einen in Python geschriebenen REST-Dienst, der mit Flask- RESTful erstellt wurde.
Sie können die React-Webseite verwenden, um Folgendes auszuführen:
Zeigen Sie eine Liste der Bilder an, die in Ihrem S3-Bucket gespeichert sind.
Laden Sie Bilder von Ihrem Computer in Ihren S3-Bucket hoch.
Zeigen Sie Bilder und Markierungen an, die Elemente identifizieren, welche im Bild erkannt werden.
Rufen Sie einen Bericht über alle Bilder in Ihrem S3-Bucket ab und senden Sie eine E-Mail mit dem Bericht.
Die Webseite ruft den REST-Service auf. Der Service sendet Anforderungen an AWS , um die folgenden Aktionen durchzuführen:
Die Liste der Bilder abrufen und in Ihrem S3-Bucket filtern.
Fotos in Ihren S3-Bucket hochladen.
Verwenden Sie Amazon Rekognition, um einzelne Fotos zu analysieren und eine Liste von Markierungen zu erhalten, die die auf dem Foto erkannten Elemente identifizieren.
Analysieren Sie alle Fotos in Ihrem S3-Bucket und verwenden Sie Amazon SES, um einen Bericht per E-Mail zu senden.
Den vollständigen Quellcode und Anweisungen zur Einrichtung und Ausführung finden Sie im vollständigen Beispiel unter GitHub
. In diesem Beispiel verwendete Dienste
Amazon Rekognition
Amazon S3
Amazon SES
Das folgende Code-Beispiel zeigt, wie Sie Anmeldeinformationen erzeugen, um eine Verbindung mit einem Amazon-SES-SMTP-Endpunkt herzustellen.
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr dazu GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. #!/usr/bin/env python3 import hmac import hashlib import base64 import argparse SMTP_REGIONS = [ "us-east-2", # US East (Ohio) "us-east-1", # US East (N. Virginia) "us-west-2", # US West (Oregon) "ap-south-1", # Asia Pacific (Mumbai) "ap-northeast-2", # Asia Pacific (Seoul) "ap-southeast-1", # Asia Pacific (Singapore) "ap-southeast-2", # Asia Pacific (Sydney) "ap-northeast-1", # Asia Pacific (Tokyo) "ca-central-1", # Canada (Central) "eu-central-1", # Europe (Frankfurt) "eu-west-1", # Europe (Ireland) "eu-west-2", # Europe (London) "eu-south-1", # Europe (Milan) "eu-north-1", # Europe (Stockholm) "sa-east-1", # South America (Sao Paulo) "us-gov-west-1", # AWS GovCloud (US) "us-gov-east-1", # AWS GovCloud (US) ] # These values are required to calculate the signature. Do not change them. DATE = "11111111" SERVICE = "ses" MESSAGE = "SendRawEmail" TERMINAL = "aws4_request" VERSION = 0x04 def sign(key, msg): return hmac.new(key, msg.encode("utf-8"), hashlib.sha256).digest() def calculate_key(secret_access_key, region): if region not in SMTP_REGIONS: raise ValueError(f"The {region} Region doesn't have an SMTP endpoint.") signature = sign(("AWS4" + secret_access_key).encode("utf-8"), DATE) signature = sign(signature, region) signature = sign(signature, SERVICE) signature = sign(signature, TERMINAL) signature = sign(signature, MESSAGE) signature_and_version = bytes([VERSION]) + signature smtp_password = base64.b64encode(signature_and_version) return smtp_password.decode("utf-8") def main(): parser = argparse.ArgumentParser( description="Convert a Secret Access Key to an SMTP password." ) parser.add_argument("secret", help="The Secret Access Key to convert.") parser.add_argument( "region", help="The AWS Region where the SMTP password will be used.", choices=SMTP_REGIONS, ) args = parser.parse_args() print(calculate_key(args.secret, args.region)) if __name__ == "__main__": main()
Wie das aussehen kann, sehen Sie am nachfolgenden Beispielcode:
Hinzufügen und verifizieren einer E-Mail-Adresse mit Amazon SES.
Senden einer standardmäßigen E-Mail-Nachricht.
Erstellen Sie eine Vorlage und senden Sie eine E-Mail-Nachricht mit Vorlage.
Senden einer Nachricht mithilfe eines Amazon-SES-SMTP-Servers.
- SDK für Python (Boto3)
-
Anmerkung
Es gibt noch mehr GitHub. Sie sehen das vollständige Beispiel und erfahren, wie Sie das AWS -Code-Beispiel-Repository
einrichten und ausführen. Verifizieren einer E-Mail-Adresse mit Amazon SES und senden von Nachrichten.
def usage_demo(): print("-" * 88) print("Welcome to the Amazon Simple Email Service (Amazon SES) email demo!") print("-" * 88) logging.basicConfig(level=logging.INFO, format="%(levelname)s: %(message)s") ses_client = boto3.client("ses") ses_identity = SesIdentity(ses_client) ses_mail_sender = SesMailSender(ses_client) ses_template = SesTemplate(ses_client) email = input("Enter an email address to send mail with Amazon SES: ") status = ses_identity.get_identity_status(email) verified = status == "Success" if not verified: answer = input( f"The address '{email}' is not verified with Amazon SES. Unless your " f"Amazon SES account is out of sandbox, you can send mail only from " f"and to verified accounts. Do you want to verify this account for use " f"with Amazon SES? If yes, the address will receive a verification " f"email (y/n): " ) if answer.lower() == "y": ses_identity.verify_email_identity(email) print(f"Follow the steps in the email to {email} to complete verification.") print("Waiting for verification...") try: ses_identity.wait_until_identity_exists(email) print(f"Identity verified for {email}.") verified = True except WaiterError: print( f"Verification timeout exceeded. You must complete the " f"steps in the email sent to {email} to verify the address." ) if verified: test_message_text = "Hello from the Amazon SES mail demo!" test_message_html = "<p>Hello!</p><p>From the <b>Amazon SES</b> mail demo!</p>" print(f"Sending mail from {email} to {email}.") ses_mail_sender.send_email( email, SesDestination([email]), "Amazon SES demo", test_message_text, test_message_html, ) input("Mail sent. Check your inbox and press Enter to continue.") template = { "name": "doc-example-template", "subject": "Example of an email template.", "text": "This is what {{name}} will {{action}} if {{name}} can't display " "HTML.", "html": "<p><i>This</i> is what {{name}} will {{action}} if {{name}} " "<b>can</b> display HTML.</p>", } print("Creating a template and sending a templated email.") ses_template.create_template(**template) template_data = {"name": email.split("@")[0], "action": "read"} if ses_template.verify_tags(template_data): ses_mail_sender.send_templated_email( email, SesDestination([email]), ses_template.name(), template_data ) input("Mail sent. Check your inbox and press Enter to continue.") print("Sending mail through the Amazon SES SMTP server.") boto3_session = boto3.Session() region = boto3_session.region_name credentials = boto3_session.get_credentials() port = 587 smtp_server = f"email-smtp.{region}.amazonaws.com" password = calculate_key(credentials.secret_key, region) message = """ Subject: Hi there This message is sent from the Amazon SES SMTP mail demo.""" context = ssl.create_default_context() with smtplib.SMTP(smtp_server, port) as server: server.starttls(context=context) server.login(credentials.access_key, password) server.sendmail(email, email, message) print("Mail sent. Check your inbox!") if ses_template.template is not None: print("Deleting demo template.") ses_template.delete_template() if verified: answer = input(f"Do you want to remove {email} from Amazon SES (y/n)? ") if answer.lower() == "y": ses_identity.delete_identity(email) print("Thanks for watching!") print("-" * 88)Erstellen von Funktionen zum Umschließen von Amazon-SES-Identitätsvorgängen.
class SesIdentity: """Encapsulates Amazon SES identity functions.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client def verify_domain_identity(self, domain_name): """ Starts verification of a domain identity. To complete verification, you must create a TXT record with a specific format through your DNS provider. For more information, see *Verifying a domain with Amazon SES* in the Amazon SES documentation: https://docs.aws.amazon.com/ses/latest/DeveloperGuide/verify-domain-procedure.html :param domain_name: The name of the domain to verify. :return: The token to include in the TXT record with your DNS provider. """ try: response = self.ses_client.verify_domain_identity(Domain=domain_name) token = response["VerificationToken"] logger.info("Got domain verification token for %s.", domain_name) except ClientError: logger.exception("Couldn't verify domain %s.", domain_name) raise else: return token def verify_email_identity(self, email_address): """ Starts verification of an email identity. This function causes an email to be sent to the specified email address from Amazon SES. To complete verification, follow the instructions in the email. :param email_address: The email address to verify. """ try: self.ses_client.verify_email_identity(EmailAddress=email_address) logger.info("Started verification of %s.", email_address) except ClientError: logger.exception("Couldn't start verification of %s.", email_address) raise def wait_until_identity_exists(self, identity): """ Waits until an identity exists. The waiter polls Amazon SES until the identity has been successfully verified or until it exceeds its maximum time. :param identity: The identity to wait for. """ try: waiter = self.ses_client.get_waiter("identity_exists") logger.info("Waiting until %s exists.", identity) waiter.wait(Identities=[identity]) except WaiterError: logger.error("Waiting for identity %s failed or timed out.", identity) raise def get_identity_status(self, identity): """ Gets the status of an identity. This can be used to discover whether an identity has been successfully verified. :param identity: The identity to query. :return: The status of the identity. """ try: response = self.ses_client.get_identity_verification_attributes( Identities=[identity] ) status = response["VerificationAttributes"].get( identity, {"VerificationStatus": "NotFound"} )["VerificationStatus"] logger.info("Got status of %s for %s.", status, identity) except ClientError: logger.exception("Couldn't get status for %s.", identity) raise else: return status def delete_identity(self, identity): """ Deletes an identity. :param identity: The identity to remove. """ try: self.ses_client.delete_identity(Identity=identity) logger.info("Deleted identity %s.", identity) except ClientError: logger.exception("Couldn't delete identity %s.", identity) raise def list_identities(self, identity_type, max_items): """ Gets the identities of the specified type for the current account. :param identity_type: The type of identity to retrieve, such as EmailAddress. :param max_items: The maximum number of identities to retrieve. :return: The list of retrieved identities. """ try: response = self.ses_client.list_identities( IdentityType=identity_type, MaxItems=max_items ) identities = response["Identities"] logger.info("Got %s identities for the current account.", len(identities)) except ClientError: logger.exception("Couldn't list identities for the current account.") raise else: return identitiesErstellen von Funktionen zum Umschließen von Amazon-SES-Vorlagenvorgängen.
class SesTemplate: """Encapsulates Amazon SES template functions.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client self.template = None self.template_tags = set() def _extract_tags(self, subject, text, html): """ Extracts tags from a template as a set of unique values. :param subject: The subject of the email. :param text: The text version of the email. :param html: The html version of the email. """ self.template_tags = set(re.findall(TEMPLATE_REGEX, subject + text + html)) logger.info("Extracted template tags: %s", self.template_tags) def create_template(self, name, subject, text, html): """ Creates an email template. :param name: The name of the template. :param subject: The subject of the email. :param text: The plain text version of the email. :param html: The HTML version of the email. """ try: template = { "TemplateName": name, "SubjectPart": subject, "TextPart": text, "HtmlPart": html, } self.ses_client.create_template(Template=template) logger.info("Created template %s.", name) self.template = template self._extract_tags(subject, text, html) except ClientError: logger.exception("Couldn't create template %s.", name) raise def delete_template(self): """ Deletes an email template. """ try: self.ses_client.delete_template(TemplateName=self.template["TemplateName"]) logger.info("Deleted template %s.", self.template["TemplateName"]) self.template = None self.template_tags = None except ClientError: logger.exception( "Couldn't delete template %s.", self.template["TemplateName"] ) raise def get_template(self, name): """ Gets a previously created email template. :param name: The name of the template to retrieve. :return: The retrieved email template. """ try: response = self.ses_client.get_template(TemplateName=name) self.template = response["Template"] logger.info("Got template %s.", name) self._extract_tags( self.template["SubjectPart"], self.template["TextPart"], self.template["HtmlPart"], ) except ClientError: logger.exception("Couldn't get template %s.", name) raise else: return self.template def list_templates(self): """ Gets a list of all email templates for the current account. :return: The list of retrieved email templates. """ try: response = self.ses_client.list_templates() templates = response["TemplatesMetadata"] logger.info("Got %s templates.", len(templates)) except ClientError: logger.exception("Couldn't get templates.") raise else: return templates def update_template(self, name, subject, text, html): """ Updates a previously created email template. :param name: The name of the template. :param subject: The subject of the email. :param text: The plain text version of the email. :param html: The HTML version of the email. """ try: template = { "TemplateName": name, "SubjectPart": subject, "TextPart": text, "HtmlPart": html, } self.ses_client.update_template(Template=template) logger.info("Updated template %s.", name) self.template = template self._extract_tags(subject, text, html) except ClientError: logger.exception("Couldn't update template %s.", name) raiseErstellen von Funktionen zum Umschließen von Amazon-SES-E-Mail-Vorgängen.
class SesDestination: """Contains data about an email destination.""" def __init__(self, tos, ccs=None, bccs=None): """ :param tos: The list of recipients on the 'To:' line. :param ccs: The list of recipients on the 'CC:' line. :param bccs: The list of recipients on the 'BCC:' line. """ self.tos = tos self.ccs = ccs self.bccs = bccs def to_service_format(self): """ :return: The destination data in the format expected by Amazon SES. """ svc_format = {"ToAddresses": self.tos} if self.ccs is not None: svc_format["CcAddresses"] = self.ccs if self.bccs is not None: svc_format["BccAddresses"] = self.bccs return svc_format class SesMailSender: """Encapsulates functions to send emails with Amazon SES.""" def __init__(self, ses_client): """ :param ses_client: A Boto3 Amazon SES client. """ self.ses_client = ses_client def send_email(self, source, destination, subject, text, html, reply_tos=None): """ Sends an email. Note: If your account is in the Amazon SES sandbox, the source and destination email accounts must both be verified. :param source: The source email account. :param destination: The destination email account. :param subject: The subject of the email. :param text: The plain text version of the body of the email. :param html: The HTML version of the body of the email. :param reply_tos: Email accounts that will receive a reply if the recipient replies to the message. :return: The ID of the message, assigned by Amazon SES. """ send_args = { "Source": source, "Destination": destination.to_service_format(), "Message": { "Subject": {"Data": subject}, "Body": {"Text": {"Data": text}, "Html": {"Data": html}}, }, } if reply_tos is not None: send_args["ReplyToAddresses"] = reply_tos try: response = self.ses_client.send_email(**send_args) message_id = response["MessageId"] logger.info( "Sent mail %s from %s to %s.", message_id, source, destination.tos ) except ClientError: logger.exception( "Couldn't send mail from %s to %s.", source, destination.tos ) raise else: return message_id def send_templated_email( self, source, destination, template_name, template_data, reply_tos=None ): """ Sends an email based on a template. A template contains replaceable tags each enclosed in two curly braces, such as {{name}}. The template data passed in this function contains key-value pairs that define the values to insert in place of the template tags. Note: If your account is in the Amazon SES sandbox, the source and destination email accounts must both be verified. :param source: The source email account. :param destination: The destination email account. :param template_name: The name of a previously created template. :param template_data: JSON-formatted key-value pairs of replacement values that are inserted in the template before it is sent. :return: The ID of the message, assigned by Amazon SES. """ send_args = { "Source": source, "Destination": destination.to_service_format(), "Template": template_name, "TemplateData": json.dumps(template_data), } if reply_tos is not None: send_args["ReplyToAddresses"] = reply_tos try: response = self.ses_client.send_templated_email(**send_args) message_id = response["MessageId"] logger.info( "Sent templated mail %s from %s to %s.", message_id, source, destination.tos, ) except ClientError: logger.exception( "Couldn't send templated mail from %s to %s.", source, destination.tos ) raise else: return message_id-
Weitere API-Informationen finden Sie in den folgenden Themen der API-Referenz zum AWS -SDK für Python (Boto3).
-
