Paso 3: cree tablas, índices y datos de muestra

Cuando su libro mayor de Amazon QLDB esté activo y acepte conexiones, podrá empezar a crear tablas con datos sobre los vehículos, sus propietarios y su información de registro. Tras crear las tablas y los índices, puede cargarlos con datos.

En este paso, creará cuatro tablas en el libro mayor vehicle-registration:

VehicleRegistration
Vehicle
Person
DriversLicense

También se crean los siguientes índices.

Nombre de la tabla	Campo
`VehicleRegistration`	`VIN`
`VehicleRegistration`	`LicensePlateNumber`
`Vehicle`	`VIN`
`Person`	`GovId`
`DriversLicense`	`LicenseNumber`
`DriversLicense`	`PersonId`

Al insertar datos de ejemplo, primero debe insertar los documentos en la tabla Person. A continuación, utilice los id asignados por el sistema de cada documento Person para rellenar los campos pertinentes en los documentos VehicleRegistration y DriversLicense correspondientes.

sugerencia

Como práctica recomendada, utilice un id de documento asignado por el sistema como clave externa. Si bien puede definir campos que pretenden ser identificadores únicos (por ejemplo, el número de chasis [VIN] de un vehículo), el verdadero identificador único de un documento es su id. Este campo se incluye en los metadatos del documento, que puede consultar en la vista confirmada (la vista de una tabla definida por el sistema).

Para obtener más información acerca de las vistas en QLDB, consulte Conceptos clave. Para obtener más información sobre metadatos, consulte Consulta de los metadatos del documento.

Para crear tablas e índices

Utilice el siguiente programa (create_table.py) para crear las tablas mencionadas anteriormente.

3.x


# Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
# SPDX-License-Identifier: MIT-0
#
# Permission is hereby granted, free of charge, to any person obtaining a copy of this
# software and associated documentation files (the "Software"), to deal in the Software
# without restriction, including without limitation the rights to use, copy, modify,
# merge, publish, distribute, sublicense, and/or sell copies of the Software, and to
# permit persons to whom the Software is furnished to do so.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
# INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
# PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
# HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# This code expects that you have AWS credentials setup per:
# https://boto3.amazonaws.com/v1/documentation/api/latest/guide/quickstart.html
from logging import basicConfig, getLogger, INFO

from pyqldbsamples.constants import Constants
from pyqldbsamples.connect_to_ledger import create_qldb_driver

logger = getLogger(__name__)
basicConfig(level=INFO)


def create_table(driver, table_name):
    """
    Create a table with the specified name.

    :type driver: :py:class:`pyqldb.driver.qldb_driver.QldbDriver`
    :param driver: An instance of the QldbDriver class.

    :type table_name: str
    :param table_name: Name of the table to create.

    :rtype: int
    :return: The number of changes to the database.
    """
    logger.info("Creating the '{}' table...".format(table_name))
    statement = 'CREATE TABLE {}'.format(table_name)
    cursor = driver.execute_lambda(lambda executor: executor.execute_statement(statement))
    logger.info('{} table created successfully.'.format(table_name))
    return len(list(cursor))


def main(ledger_name=Constants.LEDGER_NAME):
    """
    Create registrations, vehicles, owners, and licenses tables.
    """
    try:
        with create_qldb_driver(ledger_name) as driver:
            create_table(driver, Constants.DRIVERS_LICENSE_TABLE_NAME)
            create_table(driver, Constants.PERSON_TABLE_NAME)
            create_table(driver, Constants.VEHICLE_TABLE_NAME)
            create_table(driver, Constants.VEHICLE_REGISTRATION_TABLE_NAME)
            logger.info('Tables created successfully.')
    except Exception as e:
        logger.exception('Errors creating tables.')
        raise e


if __name__ == '__main__':
    main()

2.x


# Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
# SPDX-License-Identifier: MIT-0
#
# Permission is hereby granted, free of charge, to any person obtaining a copy of this
# software and associated documentation files (the "Software"), to deal in the Software
# without restriction, including without limitation the rights to use, copy, modify,
# merge, publish, distribute, sublicense, and/or sell copies of the Software, and to
# permit persons to whom the Software is furnished to do so.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
# INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
# PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
# HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# This code expects that you have AWS credentials setup per:
# https://boto3.amazonaws.com/v1/documentation/api/latest/guide/quickstart.html
from logging import basicConfig, getLogger, INFO

from pyqldbsamples.constants import Constants
from pyqldbsamples.connect_to_ledger import create_qldb_session

logger = getLogger(__name__)
basicConfig(level=INFO)


def create_table(transaction_executor, table_name):
    """
    Create a table with the specified name using an Executor object.

    :type transaction_executor: :py:class:`pyqldb.execution.executor.Executor`
    :param transaction_executor: An Executor object allowing for execution of statements within a transaction.

    :type table_name: str
    :param table_name: Name of the table to create.

    :rtype: int
    :return: The number of changes to the database.
    """
    logger.info("Creating the '{}' table...".format(table_name))
    statement = 'CREATE TABLE {}'.format(table_name)
    cursor = transaction_executor.execute_statement(statement)
    logger.info('{} table created successfully.'.format(table_name))
    return len(list(cursor))


if __name__ == '__main__':
    """
    Create registrations, vehicles, owners, and licenses tables in a single transaction.
    """
    try:
        with create_qldb_session() as session:
            session.execute_lambda(lambda x: create_table(x, Constants.DRIVERS_LICENSE_TABLE_NAME) and
                                   create_table(x, Constants.PERSON_TABLE_NAME) and
                                   create_table(x, Constants.VEHICLE_TABLE_NAME) and
                                   create_table(x, Constants.VEHICLE_REGISTRATION_TABLE_NAME),
                                   lambda retry_attempt: logger.info('Retrying due to OCC conflict...'))
            logger.info('Tables created successfully.')
    except Exception:
        logger.exception('Errors creating tables.')

nota

Este programa muestra cómo utilizar la función execute_lambda. En este ejemplo, ejecuta varias instrucciones CREATE TABLE de PartiQL con una sola expresión lambda.

Esta función de ejecución inicia implícitamente una transacción, ejecuta todas las instrucciones de lambda y, a continuación, confirma automáticamente la transacción.

Para ejecutar el programa, introduzca el siguiente comando.
```
python create_table.py
```

Utilice el siguiente programa (create_index.py) para crear índices en las tablas, tal y como se describió anteriormente.

3.x


# Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
# SPDX-License-Identifier: MIT-0
#
# Permission is hereby granted, free of charge, to any person obtaining a copy of this
# software and associated documentation files (the "Software"), to deal in the Software
# without restriction, including without limitation the rights to use, copy, modify,
# merge, publish, distribute, sublicense, and/or sell copies of the Software, and to
# permit persons to whom the Software is furnished to do so.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
# INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
# PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
# HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# This code expects that you have AWS credentials setup per:
# https://boto3.amazonaws.com/v1/documentation/api/latest/guide/quickstart.html
from logging import basicConfig, getLogger, INFO

from pyqldbsamples.constants import Constants
from pyqldbsamples.connect_to_ledger import create_qldb_driver

logger = getLogger(__name__)
basicConfig(level=INFO)


def create_index(driver, table_name, index_attribute):
    """
    Create an index for a particular table.

    :type driver: :py:class:`pyqldb.driver.qldb_driver.QldbDriver`
    :param driver: An instance of the QldbDriver class.

    :type table_name: str
    :param table_name: Name of the table to add indexes for.

    :type index_attribute: str
    :param index_attribute: Index to create on a single attribute.

    :rtype: int
    :return: The number of changes to the database.
    """
    logger.info("Creating index on '{}'...".format(index_attribute))
    statement = 'CREATE INDEX on {} ({})'.format(table_name, index_attribute)
    cursor = driver.execute_lambda(lambda executor: executor.execute_statement(statement))
    return len(list(cursor))


def main(ledger_name=Constants.LEDGER_NAME):
    """
    Create indexes on tables in a particular ledger.
    """
    logger.info('Creating indexes on all tables...')
    try:
        with create_qldb_driver(ledger_name) as driver:
            create_index(driver, Constants.PERSON_TABLE_NAME, Constants.GOV_ID_INDEX_NAME)
            create_index(driver, Constants.VEHICLE_TABLE_NAME, Constants.VEHICLE_VIN_INDEX_NAME)
            create_index(driver, Constants.VEHICLE_REGISTRATION_TABLE_NAME, Constants.LICENSE_PLATE_NUMBER_INDEX_NAME)
            create_index(driver, Constants.VEHICLE_REGISTRATION_TABLE_NAME, Constants.VEHICLE_VIN_INDEX_NAME)
            create_index(driver, Constants.DRIVERS_LICENSE_TABLE_NAME, Constants.PERSON_ID_INDEX_NAME)
            create_index(driver, Constants.DRIVERS_LICENSE_TABLE_NAME, Constants.LICENSE_NUMBER_INDEX_NAME)
            logger.info('Indexes created successfully.')
    except Exception as e:
        logger.exception('Unable to create indexes.')
        raise e


if __name__ == '__main__':
    main()

2.x


# Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
# SPDX-License-Identifier: MIT-0
#
# Permission is hereby granted, free of charge, to any person obtaining a copy of this
# software and associated documentation files (the "Software"), to deal in the Software
# without restriction, including without limitation the rights to use, copy, modify,
# merge, publish, distribute, sublicense, and/or sell copies of the Software, and to
# permit persons to whom the Software is furnished to do so.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
# INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
# PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
# HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# This code expects that you have AWS credentials setup per:
# https://boto3.amazonaws.com/v1/documentation/api/latest/guide/quickstart.html
from logging import basicConfig, getLogger, INFO

from pyqldbsamples.constants import Constants
from pyqldbsamples.connect_to_ledger import create_qldb_session

logger = getLogger(__name__)
basicConfig(level=INFO)


def create_index(transaction_executor, table_name, index_attribute):
    """
    Create an index for a particular table.

    :type transaction_executor: :py:class:`pyqldb.execution.executor.Executor`
    :param transaction_executor: An Executor object allowing for execution of statements within a transaction.

    :type table_name: str
    :param table_name: Name of the table to add indexes for.

    :type index_attribute: str
    :param index_attribute: Index to create on a single attribute.

    :rtype: int
    :return: The number of changes to the database.
    """
    logger.info("Creating index on '{}'...".format(index_attribute))
    statement = 'CREATE INDEX on {} ({})'.format(table_name, index_attribute)
    cursor = transaction_executor.execute_statement(statement)
    return len(list(cursor))


if __name__ == '__main__':
    """
    Create indexes on tables in a particular ledger.
    """
    logger.info('Creating indexes on all tables in a single transaction...')
    try:
        with create_qldb_session() as session:
            session.execute_lambda(lambda x: create_index(x, Constants.PERSON_TABLE_NAME,
                                                          Constants.GOV_ID_INDEX_NAME)
                                   and create_index(x, Constants.VEHICLE_TABLE_NAME,
                                                    Constants.VEHICLE_VIN_INDEX_NAME)
                                   and create_index(x, Constants.VEHICLE_REGISTRATION_TABLE_NAME,
                                                    Constants.LICENSE_PLATE_NUMBER_INDEX_NAME)
                                   and create_index(x, Constants.VEHICLE_REGISTRATION_TABLE_NAME,
                                                    Constants.VEHICLE_VIN_INDEX_NAME)
                                   and create_index(x, Constants.DRIVERS_LICENSE_TABLE_NAME,
                                                    Constants.PERSON_ID_INDEX_NAME)
                                   and create_index(x, Constants.DRIVERS_LICENSE_TABLE_NAME,
                                                    Constants.LICENSE_NUMBER_INDEX_NAME),
                                   lambda retry_attempt: logger.info('Retrying due to OCC conflict...'))
            logger.info('Indexes created successfully.')
    except Exception:
        logger.exception('Unable to create indexes.')

Para ejecutar el programa, introduzca el siguiente comando.
```
python create_index.py
```

Para cargar los datos en las tablas

Revise el siguiente archivo (sample_data.py), que representa los datos de ejemplo que inserta en las tablas vehicle-registration. Este archivo también se importa del paquete amazon.ion para proporcionar funciones auxiliares que convierten, analizan e imprimen datos de Amazon Ion.


# Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
# SPDX-License-Identifier: MIT-0
#
# Permission is hereby granted, free of charge, to any person obtaining a copy of this
# software and associated documentation files (the "Software"), to deal in the Software
# without restriction, including without limitation the rights to use, copy, modify,
# merge, publish, distribute, sublicense, and/or sell copies of the Software, and to
# permit persons to whom the Software is furnished to do so.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
# INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
# PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
# HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
from datetime import datetime
from decimal import Decimal
from logging import basicConfig, getLogger, INFO

from amazon.ion.simple_types import IonPyBool, IonPyBytes, IonPyDecimal, IonPyDict, IonPyFloat, IonPyInt, IonPyList, \
    IonPyNull, IonPySymbol, IonPyText, IonPyTimestamp
from amazon.ion.simpleion import dumps, loads

logger = getLogger(__name__)
basicConfig(level=INFO)
IonValue = (IonPyBool, IonPyBytes, IonPyDecimal, IonPyDict, IonPyFloat, IonPyInt, IonPyList, IonPyNull, IonPySymbol,
            IonPyText, IonPyTimestamp)


class SampleData:
    """
    Sample domain objects for use throughout this tutorial.
    """
    DRIVERS_LICENSE = [
        {
            'PersonId': '',
            'LicenseNumber': 'LEWISR261LL',
            'LicenseType': 'Learner',
            'ValidFromDate': datetime(2016, 12, 20),
            'ValidToDate': datetime(2020, 11, 15)
        },
        {
            'PersonId': '',
            'LicenseNumber': 'LOGANB486CG',
            'LicenseType': 'Probationary',
            'ValidFromDate': datetime(2016, 4, 6),
            'ValidToDate': datetime(2020, 11, 15)
        },
        {
            'PersonId': '',
            'LicenseNumber': '744 849 301',
            'LicenseType': 'Full',
            'ValidFromDate': datetime(2017, 12, 6),
            'ValidToDate': datetime(2022, 10, 15)
        },
        {
            'PersonId': '',
            'LicenseNumber': 'P626-168-229-765',
            'LicenseType': 'Learner',
            'ValidFromDate': datetime(2017, 8, 16),
            'ValidToDate': datetime(2021, 11, 15)
        },
        {
            'PersonId': '',
            'LicenseNumber': 'S152-780-97-415-0',
            'LicenseType': 'Probationary',
            'ValidFromDate': datetime(2015, 8, 15),
            'ValidToDate': datetime(2021, 8, 21)
        }
    ]
    PERSON = [
        {
            'FirstName': 'Raul',
            'LastName': 'Lewis',
            'Address': '1719 University Street, Seattle, WA, 98109',
            'DOB': datetime(1963, 8, 19),
            'GovId': 'LEWISR261LL',
            'GovIdType': 'Driver License'
        },
        {
            'FirstName': 'Brent',
            'LastName': 'Logan',
            'DOB': datetime(1967, 7, 3),
            'Address': '43 Stockert Hollow Road, Everett, WA, 98203',
            'GovId': 'LOGANB486CG',
            'GovIdType': 'Driver License'
        },
        {
            'FirstName': 'Alexis',
            'LastName': 'Pena',
            'DOB': datetime(1974, 2, 10),
            'Address': '4058 Melrose Street, Spokane Valley, WA, 99206',
            'GovId': '744 849 301',
            'GovIdType': 'SSN'
        },
        {
            'FirstName': 'Melvin',
            'LastName': 'Parker',
            'DOB': datetime(1976, 5, 22),
            'Address': '4362 Ryder Avenue, Seattle, WA, 98101',
            'GovId': 'P626-168-229-765',
            'GovIdType': 'Passport'
        },
        {
            'FirstName': 'Salvatore',
            'LastName': 'Spencer',
            'DOB': datetime(1997, 11, 15),
            'Address': '4450 Honeysuckle Lane, Seattle, WA, 98101',
            'GovId': 'S152-780-97-415-0',
            'GovIdType': 'Passport'
        }
    ]
    VEHICLE = [
        {
            'VIN': '1N4AL11D75C109151',
            'Type': 'Sedan',
            'Year': 2011,
            'Make': 'Audi',
            'Model': 'A5',
            'Color': 'Silver'
        },
        {
            'VIN': 'KM8SRDHF6EU074761',
            'Type': 'Sedan',
            'Year': 2015,
            'Make': 'Tesla',
            'Model': 'Model S',
            'Color': 'Blue'
        },
        {
            'VIN': '3HGGK5G53FM761765',
            'Type': 'Motorcycle',
            'Year': 2011,
            'Make': 'Ducati',
            'Model': 'Monster 1200',
            'Color': 'Yellow'
        },
        {
            'VIN': '1HVBBAANXWH544237',
            'Type': 'Semi',
            'Year': 2009,
            'Make': 'Ford',
            'Model': 'F 150',
            'Color': 'Black'
        },
        {
            'VIN': '1C4RJFAG0FC625797',
            'Type': 'Sedan',
            'Year': 2019,
            'Make': 'Mercedes',
            'Model': 'CLK 350',
            'Color': 'White'
        }
    ]
    VEHICLE_REGISTRATION = [
        {
            'VIN': '1N4AL11D75C109151',
            'LicensePlateNumber': 'LEWISR261LL',
            'State': 'WA',
            'City': 'Seattle',
            'ValidFromDate': datetime(2017, 8, 21),
            'ValidToDate': datetime(2020, 5, 11),
            'PendingPenaltyTicketAmount': Decimal('90.25'),
            'Owners': {
                'PrimaryOwner': {'PersonId': ''},
                'SecondaryOwners': []
            }
        },
        {
            'VIN': 'KM8SRDHF6EU074761',
            'LicensePlateNumber': 'CA762X',
            'State': 'WA',
            'City': 'Kent',
            'PendingPenaltyTicketAmount': Decimal('130.75'),
            'ValidFromDate': datetime(2017, 9, 14),
            'ValidToDate': datetime(2020, 6, 25),
            'Owners': {
                'PrimaryOwner': {'PersonId': ''},
                'SecondaryOwners': []
            }
        },
        {
            'VIN': '3HGGK5G53FM761765',
            'LicensePlateNumber': 'CD820Z',
            'State': 'WA',
            'City': 'Everett',
            'PendingPenaltyTicketAmount': Decimal('442.30'),
            'ValidFromDate': datetime(2011, 3, 17),
            'ValidToDate': datetime(2021, 3, 24),
            'Owners': {
                'PrimaryOwner': {'PersonId': ''},
                'SecondaryOwners': []
            }
        },
        {
            'VIN': '1HVBBAANXWH544237',
            'LicensePlateNumber': 'LS477D',
            'State': 'WA',
            'City': 'Tacoma',
            'PendingPenaltyTicketAmount': Decimal('42.20'),
            'ValidFromDate': datetime(2011, 10, 26),
            'ValidToDate': datetime(2023, 9, 25),
            'Owners': {
                'PrimaryOwner': {'PersonId': ''},
                'SecondaryOwners': []
            }
        },
        {
            'VIN': '1C4RJFAG0FC625797',
            'LicensePlateNumber': 'TH393F',
            'State': 'WA',
            'City': 'Olympia',
            'PendingPenaltyTicketAmount': Decimal('30.45'),
            'ValidFromDate': datetime(2013, 9, 2),
            'ValidToDate': datetime(2024, 3, 19),
            'Owners': {
                'PrimaryOwner': {'PersonId': ''},
                'SecondaryOwners': []
            }
        }
    ]


def convert_object_to_ion(py_object):
    """
    Convert a Python object into an Ion object.

    :type py_object: object
    :param py_object: The object to convert.

    :rtype: :py:class:`amazon.ion.simple_types.IonPyValue`
    :return: The converted Ion object.
    """
    ion_object = loads(dumps(py_object))
    return ion_object


def to_ion_struct(key, value):
    """
    Convert the given key and value into an Ion struct.

    :type key: str
    :param key: The key which serves as an unique identifier.

    :type value: str
    :param value: The value associated with a given key.

    :rtype: :py:class:`amazon.ion.simple_types.IonPyDict`
    :return: The Ion dictionary object.
    """
    ion_struct = dict()
    ion_struct[key] = value
    return loads(str(ion_struct))


def get_document_ids(transaction_executor, table_name, field, value):
    """
    Gets the document IDs from the given table.

    :type transaction_executor: :py:class:`pyqldb.execution.executor.Executor`
    :param transaction_executor: An Executor object allowing for execution of statements within a transaction.

    :type table_name: str
    :param table_name: The table name to query.

    :type field: str
    :param field: A field to query.

    :type value: str
    :param value: The key of the given field.

    :rtype: list
    :return: A list of document IDs.
    """
    query = "SELECT id FROM {} AS t BY id WHERE t.{} = ?".format(table_name, field)
    cursor = transaction_executor.execute_statement(query, convert_object_to_ion(value))
    return list(map(lambda table: table.get('id'), cursor))


def get_document_ids_from_dml_results(result):
    """
    Return a list of modified document IDs as strings from DML results.

    :type result: :py:class:`pyqldb.cursor.buffered_cursor.BufferedCursor`
    :param: result: The result set from DML operation.

    :rtype: list
    :return: List of document IDs.
    """
    ret_val = list(map(lambda x: x.get('documentId'), result))
    return ret_val


def print_result(cursor):
    """
    Pretty print the result set. Returns the number of documents in the result set.

    :type cursor: :py:class:`pyqldb.cursor.stream_cursor.StreamCursor`/
                  :py:class:`pyqldb.cursor.buffered_cursor.BufferedCursor`
    :param cursor: An instance of the StreamCursor or BufferedCursor class.

    :rtype: int
    :return: Number of documents in the result set.
    """
    result_counter = 0
    for row in cursor:
        # Each row would be in Ion format.
        print_ion(row)
        result_counter += 1
    return result_counter


def print_ion(ion_value):
    """
    Pretty print an Ion Value.

    :type ion_value: :py:class:`amazon.ion.simple_types.IonPySymbol`
    :param ion_value: Any Ion Value to be pretty printed.
    """
    logger.info(dumps(ion_value, binary=False, indent='  ', omit_version_marker=True))

nota

La función get_document_ids ejecuta una consulta que devuelve los identificadores de documentos asignados por el sistema desde una tabla. Para obtener más información, consulte Uso de la cláusula BY para consultar el identificador del documento.

Utilice el siguiente programa (insert_document.py) para insertar los datos de ejemplo en las tablas.

3.x


# Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
# SPDX-License-Identifier: MIT-0
#
# Permission is hereby granted, free of charge, to any person obtaining a copy of this
# software and associated documentation files (the "Software"), to deal in the Software
# without restriction, including without limitation the rights to use, copy, modify,
# merge, publish, distribute, sublicense, and/or sell copies of the Software, and to
# permit persons to whom the Software is furnished to do so.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
# INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
# PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
# HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# This code expects that you have AWS credentials setup per:
# https://boto3.amazonaws.com/v1/documentation/api/latest/guide/quickstart.html
from logging import basicConfig, getLogger, INFO

from pyqldbsamples.constants import Constants
from pyqldbsamples.model.sample_data import convert_object_to_ion, SampleData, get_document_ids_from_dml_results
from pyqldbsamples.connect_to_ledger import create_qldb_driver

logger = getLogger(__name__)
basicConfig(level=INFO)


def update_person_id(document_ids):
    """
    Update the PersonId value for DriversLicense records and the PrimaryOwner value for VehicleRegistration records.

    :type document_ids: list
    :param document_ids: List of document IDs.

    :rtype: list
    :return: Lists of updated DriversLicense records and updated VehicleRegistration records.
    """
    new_drivers_licenses = SampleData.DRIVERS_LICENSE.copy()
    new_vehicle_registrations = SampleData.VEHICLE_REGISTRATION.copy()
    for i in range(len(SampleData.PERSON)):
        drivers_license = new_drivers_licenses[i]
        registration = new_vehicle_registrations[i]
        drivers_license.update({'PersonId': str(document_ids[i])})
        registration['Owners']['PrimaryOwner'].update({'PersonId': str(document_ids[i])})
    return new_drivers_licenses, new_vehicle_registrations


def insert_documents(driver, table_name, documents):
    """
    Insert the given list of documents into a table in a single transaction.

    :type driver: :py:class:`pyqldb.driver.qldb_driver.QldbDriver`
    :param driver: An instance of the QldbDriver class.

    :type table_name: str
    :param table_name: Name of the table to insert documents into.

    :type documents: list
    :param documents: List of documents to insert.

    :rtype: list
    :return: List of documents IDs for the newly inserted documents.
    """
    logger.info('Inserting some documents in the {} table...'.format(table_name))
    statement = 'INSERT INTO {} ?'.format(table_name)
    cursor = driver.execute_lambda(lambda executor: executor.execute_statement(statement,
                                                                               convert_object_to_ion(documents)))
    list_of_document_ids = get_document_ids_from_dml_results(cursor)

    return list_of_document_ids


def update_and_insert_documents(driver):
    """
    Handle the insertion of documents and updating PersonIds.

    :type driver: :py:class:`pyqldb.driver.qldb_driver.QldbDriver`
    :param driver: An instance of the QldbDriver class.
    """
    list_ids = insert_documents(driver, Constants.PERSON_TABLE_NAME, SampleData.PERSON)

    logger.info("Updating PersonIds for 'DriversLicense' and PrimaryOwner for 'VehicleRegistration'...")
    new_licenses, new_registrations = update_person_id(list_ids)

    insert_documents(driver, Constants.VEHICLE_TABLE_NAME, SampleData.VEHICLE)
    insert_documents(driver, Constants.VEHICLE_REGISTRATION_TABLE_NAME, new_registrations)
    insert_documents(driver, Constants.DRIVERS_LICENSE_TABLE_NAME, new_licenses)


def main(ledger_name=Constants.LEDGER_NAME):
    """
    Insert documents into a table in a QLDB ledger.
    """
    try:
        with create_qldb_driver(ledger_name) as driver:
            # An INSERT statement creates the initial revision of a document with a version number of zero.
            # QLDB also assigns a unique document identifier in GUID format as part of the metadata.
            update_and_insert_documents(driver)
            logger.info('Documents inserted successfully!')
    except Exception as e:
        logger.exception('Error inserting or updating documents.')
        raise e


if __name__ == '__main__':
    main()

2.x


# Copyright 2019 Amazon.com, Inc. or its affiliates. All Rights Reserved.
# SPDX-License-Identifier: MIT-0
#
# Permission is hereby granted, free of charge, to any person obtaining a copy of this
# software and associated documentation files (the "Software"), to deal in the Software
# without restriction, including without limitation the rights to use, copy, modify,
# merge, publish, distribute, sublicense, and/or sell copies of the Software, and to
# permit persons to whom the Software is furnished to do so.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED,
# INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A
# PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
# HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
# OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
# SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
#
# This code expects that you have AWS credentials setup per:
# https://boto3.amazonaws.com/v1/documentation/api/latest/guide/quickstart.html
from logging import basicConfig, getLogger, INFO

from pyqldbsamples.constants import Constants
from pyqldbsamples.model.sample_data import convert_object_to_ion, SampleData, get_document_ids_from_dml_results
from pyqldbsamples.connect_to_ledger import create_qldb_session

logger = getLogger(__name__)
basicConfig(level=INFO)


def update_person_id(document_ids):
    """
    Update the PersonId value for DriversLicense records and the PrimaryOwner value for VehicleRegistration records.

    :type document_ids: list
    :param document_ids: List of document IDs.

    :rtype: list
    :return: Lists of updated DriversLicense records and updated VehicleRegistration records.
    """
    new_drivers_licenses = SampleData.DRIVERS_LICENSE.copy()
    new_vehicle_registrations = SampleData.VEHICLE_REGISTRATION.copy()
    for i in range(len(SampleData.PERSON)):
        drivers_license = new_drivers_licenses[i]
        registration = new_vehicle_registrations[i]
        drivers_license.update({'PersonId': str(document_ids[i])})
        registration['Owners']['PrimaryOwner'].update({'PersonId': str(document_ids[i])})
    return new_drivers_licenses, new_vehicle_registrations


def insert_documents(transaction_executor, table_name, documents):
    """
    Insert the given list of documents into a table in a single transaction.

    :type transaction_executor: :py:class:`pyqldb.execution.executor.Executor`
    :param transaction_executor: An Executor object allowing for execution of statements within a transaction.

    :type table_name: str
    :param table_name: Name of the table to insert documents into.

    :type documents: list
    :param documents: List of documents to insert.

    :rtype: list
    :return: List of documents IDs for the newly inserted documents.
    """
    logger.info('Inserting some documents in the {} table...'.format(table_name))
    statement = 'INSERT INTO {} ?'.format(table_name)
    cursor = transaction_executor.execute_statement(statement, convert_object_to_ion(documents))
    list_of_document_ids = get_document_ids_from_dml_results(cursor)

    return list_of_document_ids


def update_and_insert_documents(transaction_executor):
    """
    Handle the insertion of documents and updating PersonIds all in a single transaction.

    :type transaction_executor: :py:class:`pyqldb.execution.executor.Executor`
    :param transaction_executor: An Executor object allowing for execution of statements within a transaction.
    """
    list_ids = insert_documents(transaction_executor, Constants.PERSON_TABLE_NAME, SampleData.PERSON)

    logger.info("Updating PersonIds for 'DriversLicense' and PrimaryOwner for 'VehicleRegistration'...")
    new_licenses, new_registrations = update_person_id(list_ids)

    insert_documents(transaction_executor, Constants.VEHICLE_TABLE_NAME, SampleData.VEHICLE)
    insert_documents(transaction_executor, Constants.VEHICLE_REGISTRATION_TABLE_NAME, new_registrations)
    insert_documents(transaction_executor, Constants.DRIVERS_LICENSE_TABLE_NAME, new_licenses)


if __name__ == '__main__':
    """
    Insert documents into a table in a QLDB ledger.
    """
    try:
        with create_qldb_session() as session:
            # An INSERT statement creates the initial revision of a document with a version number of zero.
            # QLDB also assigns a unique document identifier in GUID format as part of the metadata.
            session.execute_lambda(lambda executor: update_and_insert_documents(executor),
                                   lambda retry_attempt: logger.info('Retrying due to OCC conflict...'))
            logger.info('Documents inserted successfully!')
    except Exception:
        logger.exception('Error inserting or updating documents.')

nota

Este programa muestra cómo llamar a la función execute_statement con valores parametrizados. Puede pasar parámetros de datos además de la instrucción PartiQL que desee ejecutar. Utilice un signo de interrogación (?) como marcador de posición variable en la cadena de la instrucción.
Si una instrucción INSERT tiene éxito, devuelve id de cada documento insertado.

Para ejecutar el programa, introduzca el siguiente comando.
```
python insert_document.py
```

A continuación, puede usar las instrucciones SELECT para leer los datos de las tablas del libro mayor vehicle-registration. Continúe en Paso 4: consultar las tablas en un libro mayor.

Aviso JavaScript está desactivado o no está disponible en su navegador.

Para utilizar la documentación de AWS, debe estar habilitado JavaScript. Para obtener más información, consulte las páginas de ayuda de su navegador.

Convenciones del documento

Paso 2: probar la conectividad

Paso 4: consultar las tablas