Exemples de données d'événements publiées par Amazon SES sur Firehose - Amazon Simple Email Service
registre de retour à l'expéditeurregistre de réclamationregistre de remiseregistre d'envoiregistre de rejetregistre d'ouvertureregistre de clicregistre d'échec de renduDeliveryDelay recordAbonnement

Les traductions sont fournies par des outils de traduction automatique. En cas de conflit entre le contenu d'une traduction et celui de la version originale en anglais, la version anglaise prévaudra.

Exemples de données d'événements publiées par Amazon SES sur Firehose

Cette section fournit des exemples des types d'enregistrements d'événements d'envoi d'e-mails publiés par Amazon SES sur Firehose.

Note

Dans les exemples suivants, où un champ tag est utilisé, il utilise la publication d'événements via un jeu de configuration pour lequel SES prend en charge la publication d'étiquettes pour tous les types d'événements. Si vous utilisez des notifications de commentaires directement sur l'identité, SES ne publie pas d'étiquettes. Découvrez comment ajouter des étiquettes lors de la création d'un jeu de configuration ou de la modification d'un jeu de configuration.

registre de retour à l'expéditeur

Voici un exemple d'enregistrement d'Bounceévénement publié par Amazon SES sur Firehose. 

{
  "eventType":"Bounce",
  "bounce":{
    "bounceType":"Permanent",
    "bounceSubType":"General",
    "bouncedRecipients":[
      {
        "emailAddress":"recipient@example.com",
        "action":"failed",
        "status":"5.1.1",
        "diagnosticCode":"smtp; 550 5.1.1 user unknown"
      }
    ],
    "timestamp":"2017-08-05T00:41:02.669Z",
    "feedbackId":"01000157c44f053b-61b59c11-9236-11e6-8f96-7be8aexample-000000",
    "reportingMTA":"dsn; mta.example.com"
  },
  "mail":{
    "timestamp":"2017-08-05T00:40:02.012Z",
    "source":"Sender Name <sender@example.com>",
    "sourceArn":"arn:aws:ses:us-east-1:123456789012:identity/sender@example.com",
    "sendingAccountId":"123456789012",
    "messageId":"EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
    "destination":[
      "recipient@example.com"
    ],
    "headersTruncated":false,
    "headers":[
      {
        "name":"From",
        "value":"Sender Name <sender@example.com>"
      },
      {
        "name":"To",
        "value":"recipient@example.com"
      },
      {
        "name":"Subject",
        "value":"Message sent from Amazon SES"
      },
      {
        "name":"MIME-Version",
        "value":"1.0"
      },
      {
        "name":"Content-Type",
        "value":"multipart/alternative; boundary=\"----=_Part_7307378_1629847660.1516840721503\""
      }
    ],
    "commonHeaders":{
      "from":[
        "Sender Name <sender@example.com>"
      ],
      "to":[
        "recipient@example.com"
      ],
      "messageId":"EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
      "subject":"Message sent from Amazon SES"
    },
    "tags":{
      "ses:configuration-set":[
        "ConfigSet"
      ],
      "ses:source-ip":[
        "192.0.2.0"
      ],
      "ses:from-domain":[
        "example.com"
      ],
      "ses:caller-identity":[
        "ses_user"
      ]
    }
  }
}

registre de réclamation

Voici un exemple d'enregistrement d'Complaintévénement publié par Amazon SES sur Firehose. 

{
  "eventType":"Complaint",
  "complaint": {
    "complainedRecipients":[
      {
        "emailAddress":"recipient@example.com"
      }
    ],
    "timestamp":"2017-08-05T00:41:02.669Z",
    "feedbackId":"01000157c44f053b-61b59c11-9236-11e6-8f96-7be8aexample-000000",
    "userAgent":"Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/60.0.3112.90 Safari/537.36",
    "complaintFeedbackType":"abuse",
    "arrivalDate":"2017-08-05T00:41:02.669Z"
  },
  "mail":{
    "timestamp":"2017-08-05T00:40:01.123Z",
    "source":"Sender Name <sender@example.com>",
    "sourceArn":"arn:aws:ses:us-east-1:123456789012:identity/sender@example.com",
    "sendingAccountId":"123456789012",
    "messageId":"EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
    "destination":[
      "recipient@example.com"
    ],
    "headersTruncated":false,
    "headers":[
      {
        "name":"From",
        "value":"Sender Name <sender@example.com>"
      },
      {
        "name":"To",
        "value":"recipient@example.com"
      },
      {
        "name":"Subject",
        "value":"Message sent from Amazon SES"
      },
      {
        "name":"MIME-Version","value":"1.0"
      },
      {
        "name":"Content-Type",
        "value":"multipart/alternative; boundary=\"----=_Part_7298998_679725522.1516840859643\""
      }
    ],
    "commonHeaders":{
      "from":[
        "Sender Name <sender@example.com>"
      ],
      "to":[
        "recipient@example.com"
      ],
      "messageId":"EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
      "subject":"Message sent from Amazon SES"
    },
    "tags":{
      "ses:configuration-set":[
        "ConfigSet"
      ],
      "ses:source-ip":[
        "192.0.2.0"
      ],
      "ses:from-domain":[
        "example.com"
      ],
      "ses:caller-identity":[
        "ses_user"
      ]
    }
  }
}

registre de remise

Voici un exemple d'enregistrement d'Deliveryévénement publié par Amazon SES sur Firehose. 

{
  "eventType": "Delivery",
  "mail": {
    "timestamp": "2016-10-19T23:20:52.240Z",
    "source": "sender@example.com",
    "sourceArn": "arn:aws:ses:us-east-1:123456789012:identity/sender@example.com",
    "sendingAccountId": "123456789012",
    "messageId": "EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
    "destination": [
      "recipient@example.com"
    ],
    "headersTruncated": false,
    "headers": [
      {
        "name": "From",
        "value": "sender@example.com"
      },
      {
        "name": "To",
        "value": "recipient@example.com"
      },
      {
        "name": "Subject",
        "value": "Message sent from Amazon SES"
      },
      {
        "name": "MIME-Version",
        "value": "1.0"
      },
      {
        "name": "Content-Type",
        "value": "text/html; charset=UTF-8"
      },
      {
        "name": "Content-Transfer-Encoding",
        "value": "7bit"
      }
    ],
    "commonHeaders": {
      "from": [
        "sender@example.com"
      ],
      "to": [
        "recipient@example.com"
      ],
      "messageId": "EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
      "subject": "Message sent from Amazon SES"
    },
    "tags": {
      "ses:configuration-set": [
        "ConfigSet"
      ],
      "ses:source-ip": [
        "192.0.2.0"
      ],
      "ses:from-domain": [
        "example.com"
      ],
      "ses:caller-identity": [
        "ses_user"
      ],
      "ses:outgoing-ip": [
        "192.0.2.0"
      ],
      "myCustomTag1": [
        "myCustomTagValue1"
      ],
      "myCustomTag2": [
        "myCustomTagValue2"
      ]      
    }
  },
  "delivery": {
    "timestamp": "2016-10-19T23:21:04.133Z",
    "processingTimeMillis": 11893,
    "recipients": [
      "recipient@example.com"
    ],
    "smtpResponse": "250 2.6.0 Message received",
    "reportingMTA": "mta.example.com"
  }
}

registre d'envoi

Voici un exemple d'enregistrement d'Sendévénement publié par Amazon SES sur Firehose. 

{
  "eventType": "Send",
  "mail": {
    "timestamp": "2016-10-14T05:02:16.645Z",
    "source": "sender@example.com",
    "sourceArn": "arn:aws:ses:us-east-1:123456789012:identity/sender@example.com",
    "sendingAccountId": "123456789012",
    "messageId": "EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
    "destination": [
      "recipient@example.com"
    ],
    "headersTruncated": false,
    "headers": [
      {
        "name": "From",
        "value": "sender@example.com"
      },
      {
        "name": "To",
        "value": "recipient@example.com"
      },
      {
        "name": "Subject",
        "value": "Message sent from Amazon SES"
      },
      {
        "name": "MIME-Version",
        "value": "1.0"
      },
      {
        "name": "Content-Type",
        "value": "multipart/mixed;  boundary=\"----=_Part_0_716996660.1476421336341\""
      },
      {
        "name": "X-SES-MESSAGE-TAGS",
        "value": "myCustomTag1=myCustomTagValue1, myCustomTag2=myCustomTagValue2"
      }
    ],
    "commonHeaders": {
      "from": [
        "sender@example.com"
      ],
      "to": [
        "recipient@example.com"
      ],
      "messageId": "EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
      "subject": "Message sent from Amazon SES"
    },
    "tags": {
      "ses:configuration-set": [
        "ConfigSet"
      ],
      "ses:source-ip": [
        "192.0.2.0"
      ],
      "ses:from-domain": [
        "example.com"
      ],      
      "ses:caller-identity": [
        "ses_user"
      ],
      "myCustomTag1": [
        "myCustomTagValue1"
      ],
      "myCustomTag2": [
        "myCustomTagValue2"
      ]      
    }
  },
  "send": {}
}

registre de rejet

Voici un exemple d'enregistrement d'Rejectévénement publié par Amazon SES sur Firehose. 

{
  "eventType": "Reject",
  "mail": {
    "timestamp": "2016-10-14T17:38:15.211Z",
    "source": "sender@example.com",
    "sourceArn": "arn:aws:ses:us-east-1:123456789012:identity/sender@example.com",
    "sendingAccountId": "123456789012",
    "messageId": "EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
    "destination": [
      "sender@example.com"
    ],
    "headersTruncated": false,
    "headers": [
      {
        "name": "From",
        "value": "sender@example.com"
      },
      {
        "name": "To",
        "value": "recipient@example.com"
      },      
      {
        "name": "Subject",
        "value": "Message sent from Amazon SES"
      },
      {
        "name": "MIME-Version",
        "value": "1.0"
      },      
      {
        "name": "Content-Type",
        "value": "multipart/mixed; boundary=\"qMm9M+Fa2AknHoGS\""
      },
      {
        "name": "X-SES-MESSAGE-TAGS",
        "value": "myCustomTag1=myCustomTagValue1, myCustomTag2=myCustomTagValue2"
      }  
    ],
    "commonHeaders": {
      "from": [
        "sender@example.com"
      ],
      "to": [
        "recipient@example.com"
      ],
      "messageId": "EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
      "subject": "Message sent from Amazon SES"
    },
    "tags": {
      "ses:configuration-set": [
        "ConfigSet"
      ],
      "ses:source-ip": [
        "192.0.2.0"
      ],
      "ses:from-domain": [
        "example.com"
      ],    
      "ses:caller-identity": [
        "ses_user"
      ],
      "myCustomTag1": [
        "myCustomTagValue1"
      ],
      "myCustomTag2": [
        "myCustomTagValue2"
      ]      
    }
  },
  "reject": {
    "reason": "Bad content"
  }
}

registre d'ouverture

Voici un exemple d'enregistrement d'Openévénement publié par Amazon SES sur Firehose. 

{
  "eventType": "Open",
  "mail": {
    "commonHeaders": {
      "from": [
        "sender@example.com"
      ],
      "messageId": "EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
      "subject": "Message sent from Amazon SES",
      "to": [
        "recipient@example.com"
      ]
    },
    "destination": [
      "recipient@example.com"
    ],
    "headers": [
      {
        "name": "X-SES-CONFIGURATION-SET",
        "value": "ConfigSet"
      },
      {
        "name":"X-SES-MESSAGE-TAGS",
        "value":"myCustomTag1=myCustomValue1, myCustomTag2=myCustomValue2"
      },
      {
        "name": "From",
        "value": "sender@example.com"
      },
      {
        "name": "To",
        "value": "recipient@example.com"
      },
      {
        "name": "Subject",
        "value": "Message sent from Amazon SES"
      },
      {
        "name": "MIME-Version",
        "value": "1.0"
      },
      {
        "name": "Content-Type",
        "value": "multipart/alternative; boundary=\"XBoundary\""
      }
    ],
    "headersTruncated": false,
    "messageId": "EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
    "sendingAccountId": "123456789012",
    "source": "sender@example.com",
    "tags": {
      "myCustomTag1":[
        "myCustomValue1"
      ],
      "myCustomTag2":[
        "myCustomValue2"
      ],
      "ses:caller-identity": [
        "IAM_user_or_role_name"
      ],
      "ses:configuration-set": [
        "ConfigSet"
      ],
      "ses:from-domain": [
        "example.com"
      ],
      "ses:source-ip": [
        "192.0.2.0"
      ]
    },
    "timestamp": "2017-08-09T21:59:49.927Z"
  },
  "open": {
    "ipAddress": "192.0.2.1",
    "timestamp": "2017-08-09T22:00:19.652Z",
    "userAgent": "Mozilla/5.0 (iPhone; CPU iPhone OS 10_3_3 like Mac OS X) AppleWebKit/603.3.8 (KHTML, like Gecko) Mobile/14G60"
  }
}

registre de clic

Voici un exemple d'enregistrement d'Clickévénement publié par Amazon SES sur Firehose. 

{
  "eventType": "Click",
  "click": {
    "ipAddress": "192.0.2.1",
    "link": "http://docs.aws.amazon.com/ses/latest/DeveloperGuide/send-email-smtp.html",
    "linkTags": {
      "samplekey0": [
        "samplevalue0"
      ],
      "samplekey1": [
        "samplevalue1"
      ]
    },
    "timestamp": "2017-08-09T23:51:25.570Z",
    "userAgent": "Mozilla/5.0 (Windows NT 10.0; Win64; x64) AppleWebKit/537.36 (KHTML, like Gecko) Chrome/60.0.3112.90 Safari/537.36"
  },
  "mail": {
    "commonHeaders": {
      "from": [
        "sender@example.com"
      ],
      "messageId": "EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
      "subject": "Message sent from Amazon SES",
      "to": [
        "recipient@example.com"
      ]
    },
    "destination": [
      "recipient@example.com"
    ],
    "headers": [
      {
        "name": "X-SES-CONFIGURATION-SET",
        "value": "ConfigSet"
      },
      {
        "name":"X-SES-MESSAGE-TAGS",
        "value":"myCustomTag1=myCustomValue1, myCustomTag2=myCustomValue2"
      },
      {
        "name": "From",
        "value": "sender@example.com"
      },
      {
        "name": "To",
        "value": "recipient@example.com"
      },
      {
        "name": "Subject",
        "value": "Message sent from Amazon SES"
      },
      {
        "name": "MIME-Version",
        "value": "1.0"
      },
      {
        "name": "Content-Type",
        "value": "multipart/alternative; boundary=\"XBoundary\""
      },
      {
        "name": "Message-ID",
        "value": "EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000"
      }
    ],
    "headersTruncated": false,
    "messageId": "EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
    "sendingAccountId": "123456789012",
    "source": "sender@example.com",
    "tags": {
      "myCustomTag1":[
        "myCustomValue1"
      ],
      "myCustomTag2":[
        "myCustomValue2"
      ],
      "ses:caller-identity": [
        "ses_user"
      ],
      "ses:configuration-set": [
        "ConfigSet"
      ],
      "ses:from-domain": [
        "example.com"
      ],
      "ses:source-ip": [
        "192.0.2.0"
      ]
    },
    "timestamp": "2017-08-09T23:50:05.795Z"
  }
}

registre d'échec de rendu

Voici un exemple d'enregistrement d'Rendering Failureévénement publié par Amazon SES sur Firehose. 

{
  "eventType":"Rendering Failure",
  "mail":{
    "timestamp":"2018-01-22T18:43:06.197Z",
    "source":"sender@example.com",
    "sourceArn":"arn:aws:ses:us-east-1:123456789012:identity/sender@example.com",
    "sendingAccountId":"123456789012",
    "messageId":"EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
    "destination":[
      "recipient@example.com"
    ],
    "headersTruncated":false,
    "tags":{
      "ses:configuration-set":[
        "ConfigSet"
      ]
    }
  },
  "failure":{
    "errorMessage":"Attribute 'attributeName' is not present in the rendering data.",
    "templateName":"MyTemplate"
  }
}

DeliveryDelay record

Voici un exemple d'enregistrement d'DeliveryDelayévénement publié par Amazon SES sur Firehose. 

{
  "eventType": "DeliveryDelay",
  "mail":{
    "timestamp":"2020-06-16T00:15:40.641Z",
    "source":"sender@example.com",
    "sourceArn":"arn:aws:ses:us-east-1:123456789012:identity/sender@example.com",
    "sendingAccountId":"123456789012",
    "messageId":"EXAMPLE7c191be45-e9aedb9a-02f9-4d12-a87d-dd0099a07f8a-000000",
    "destination":[
      "recipient@example.com"
    ],
    "headersTruncated":false,
    "tags":{
      "ses:configuration-set":[
        "ConfigSet"
      ]
    }
  },
  "deliveryDelay": {
    "timestamp": "2020-06-16T00:25:40.095Z",
    "delayType": "TransientCommunicationFailure",
    "expirationTime": "2020-06-16T00:25:40.914Z",
    "delayedRecipients": [{
      "emailAddress": "recipient@example.com",
      "status": "4.4.1",
      "diagnosticCode": "smtp; 421 4.4.1 Unable to connect to remote host"
    }]
  }
}

Abonnement

Voici un exemple d'enregistrement d'Subscriptionévénement publié par Amazon SES sur Firehose. 

{
  "eventType": "Subscription",
  "mail": {
    "timestamp": "2022-01-12T01:00:14.340Z",
    "source": "sender@example.com",
    "sourceArn": "arn:aws:ses:us-east-1:123456789012:identity/sender@example.com",
    "sendingAccountId": "123456789012",
    "messageId": "EXAMPLEe4bccb684-777bc8de-afa7-4970-92b0-f515137b1497-000000",
    "destination": ["recipient@example.com"],
    "headersTruncated": false,
    "headers": [
      {
        "name": "From",
        "value": "sender@example.com"
      },
      {
        "name": "To",
        "value": "recipient@example.com"
      },
      {
        "name": "Subject",
        "value": "Message sent from Amazon SES"
      },
      {
        "name": "MIME-Version",
        "value": "1.0"
      },
      {
        "name": "Content-Type",
        "value": "text/html; charset=UTF-8"
      },
      {
        "name": "Content-Transfer-Encoding",
        "value": "7bit"
      }
    ],
    "commonHeaders": {
      "from": ["sender@example.com"],
      "to": ["recipient@example.com"],
      "messageId": "EXAMPLEe4bccb684-777bc8de-afa7-4970-92b0-f515137b1497-000000",
      "subject": "Message sent from Amazon SES"
    },
    "tags": {
      "ses:operation": ["SendEmail"],
      "ses:configuration-set": ["ConfigSet"],
      "ses:source-ip": ["192.0.2.0"],
      "ses:from-domain": ["example.com"],
      "ses:caller-identity": ["ses_user"],
      "myCustomTag1": ["myCustomValue1"],
      "myCustomTag2": ["myCustomValue2"]
    }
  },
  "subscription": {
    "contactList": "ContactListName",
    "timestamp": "2022-01-12T01:00:17.910Z",
    "source": "UnsubscribeHeader",
    "newTopicPreferences": {
      "unsubscribeAll": true,
      "topicSubscriptionStatus": [
        {
          "topicName": "ExampleTopicName",
          "subscriptionStatus": "OptOut"
        }
      ]
    },
    "oldTopicPreferences": {
      "unsubscribeAll": false,
      "topicSubscriptionStatus": [
        {
          "topicName": "ExampleTopicName",
          "subscriptionStatus": "OptOut"
        }
      ]
    }
  }
}