AssociateApprovalRuleTemplateWithRepository

$result = $client->associateApprovalRuleTemplateWithRepository([/* ... */]);
$promise = $client->associateApprovalRuleTemplateWithRepositoryAsync([/* ... */]);

Creates an association between an approval rule template and a specified repository. Then, the next time a pull request is created in the repository where the destination reference (if specified) matches the destination reference (branch) for the pull request, an approval rule that matches the template conditions is automatically created for that pull request. If no destination references are specified in the template, an approval rule that matches the template contents is created for all pull requests in that repository.

Parameter Syntax

$result = $client->associateApprovalRuleTemplateWithRepository([
    'approvalRuleTemplateName' => '<string>', // REQUIRED
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

ApprovalRuleTemplateNameRequiredException:

An approval rule template name is required, but was not specified.

InvalidApprovalRuleTemplateNameException:

The name of the approval rule template is not valid. Template names must be between 1 and 100 valid characters in length. For more information about limits in CodeCommit, see Quotas in the CodeCommit User Guide.

ApprovalRuleTemplateDoesNotExistException:

The specified approval rule template does not exist. Verify that the name is correct and that you are signed in to the Amazon Web Services Region where the template was created, and then try again.

MaximumRuleTemplatesAssociatedWithRepositoryException:

The maximum number of approval rule templates for a repository has been exceeded. You cannot associate more than 25 approval rule templates with a repository.

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

BatchAssociateApprovalRuleTemplateWithRepositories

$result = $client->batchAssociateApprovalRuleTemplateWithRepositories([/* ... */]);
$promise = $client->batchAssociateApprovalRuleTemplateWithRepositoriesAsync([/* ... */]);

Creates an association between an approval rule template and one or more specified repositories.

Parameter Syntax

$result = $client->batchAssociateApprovalRuleTemplateWithRepositories([
    'approvalRuleTemplateName' => '<string>', // REQUIRED
    'repositoryNames' => ['<string>', ...], // REQUIRED
]);

Parameter Details

Result Syntax

[
    'associatedRepositoryNames' => ['<string>', ...],
    'errors' => [
        [
            'errorCode' => '<string>',
            'errorMessage' => '<string>',
            'repositoryName' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

ApprovalRuleTemplateNameRequiredException:

An approval rule template name is required, but was not specified.

InvalidApprovalRuleTemplateNameException:

The name of the approval rule template is not valid. Template names must be between 1 and 100 valid characters in length. For more information about limits in CodeCommit, see Quotas in the CodeCommit User Guide.

ApprovalRuleTemplateDoesNotExistException:

The specified approval rule template does not exist. Verify that the name is correct and that you are signed in to the Amazon Web Services Region where the template was created, and then try again.

RepositoryNamesRequiredException:

At least one repository name object is required, but was not specified.

MaximumRepositoryNamesExceededException:

The maximum number of allowed repository names was exceeded. Currently, this number is 100.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

BatchDescribeMergeConflicts

$result = $client->batchDescribeMergeConflicts([/* ... */]);
$promise = $client->batchDescribeMergeConflictsAsync([/* ... */]);

Returns information about one or more merge conflicts in the attempted merge of two commit specifiers using the squash or three-way merge strategy.

Parameter Syntax

$result = $client->batchDescribeMergeConflicts([
    'conflictDetailLevel' => 'FILE_LEVEL|LINE_LEVEL',
    'conflictResolutionStrategy' => 'NONE|ACCEPT_SOURCE|ACCEPT_DESTINATION|AUTOMERGE',
    'destinationCommitSpecifier' => '<string>', // REQUIRED
    'filePaths' => ['<string>', ...],
    'maxConflictFiles' => <integer>,
    'maxMergeHunks' => <integer>,
    'mergeOption' => 'FAST_FORWARD_MERGE|SQUASH_MERGE|THREE_WAY_MERGE', // REQUIRED
    'nextToken' => '<string>',
    'repositoryName' => '<string>', // REQUIRED
    'sourceCommitSpecifier' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'baseCommitId' => '<string>',
    'conflicts' => [
        [
            'conflictMetadata' => [
                'contentConflict' => true || false,
                'fileModeConflict' => true || false,
                'fileModes' => [
                    'base' => 'EXECUTABLE|NORMAL|SYMLINK',
                    'destination' => 'EXECUTABLE|NORMAL|SYMLINK',
                    'source' => 'EXECUTABLE|NORMAL|SYMLINK',
                ],
                'filePath' => '<string>',
                'fileSizes' => [
                    'base' => <integer>,
                    'destination' => <integer>,
                    'source' => <integer>,
                ],
                'isBinaryFile' => [
                    'base' => true || false,
                    'destination' => true || false,
                    'source' => true || false,
                ],
                'mergeOperations' => [
                    'destination' => 'A|M|D',
                    'source' => 'A|M|D',
                ],
                'numberOfConflicts' => <integer>,
                'objectTypeConflict' => true || false,
                'objectTypes' => [
                    'base' => 'FILE|DIRECTORY|GIT_LINK|SYMBOLIC_LINK',
                    'destination' => 'FILE|DIRECTORY|GIT_LINK|SYMBOLIC_LINK',
                    'source' => 'FILE|DIRECTORY|GIT_LINK|SYMBOLIC_LINK',
                ],
            ],
            'mergeHunks' => [
                [
                    'base' => [
                        'endLine' => <integer>,
                        'hunkContent' => '<string>',
                        'startLine' => <integer>,
                    ],
                    'destination' => [
                        'endLine' => <integer>,
                        'hunkContent' => '<string>',
                        'startLine' => <integer>,
                    ],
                    'isConflict' => true || false,
                    'source' => [
                        'endLine' => <integer>,
                        'hunkContent' => '<string>',
                        'startLine' => <integer>,
                    ],
                ],
                // ...
            ],
        ],
        // ...
    ],
    'destinationCommitId' => '<string>',
    'errors' => [
        [
            'exceptionName' => '<string>',
            'filePath' => '<string>',
            'message' => '<string>',
        ],
        // ...
    ],
    'nextToken' => '<string>',
    'sourceCommitId' => '<string>',
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

MergeOptionRequiredException:

A merge option or stategy is required, and none was provided.

InvalidMergeOptionException:

The specified merge option is not valid for this operation. Not all merge strategies are supported for all operations.

InvalidContinuationTokenException:

The specified continuation token is not valid.

CommitRequiredException:

A commit was not specified.

CommitDoesNotExistException:

The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

InvalidCommitException:

The specified commit is not valid.

TipsDivergenceExceededException:

The divergence between the tips of the provided commit specifiers is too great to determine whether there might be any merge conflicts. Locally compare the specifiers using git diff or a diff tool.

InvalidMaxConflictFilesException:

The specified value for the number of conflict files to return is not valid.

InvalidMaxMergeHunksException:

The specified value for the number of merge hunks to return is not valid.

InvalidConflictDetailLevelException:

The specified conflict detail level is not valid.

InvalidConflictResolutionStrategyException:

The specified conflict resolution strategy is not valid.

MaximumFileContentToLoadExceededException:

The number of files to load exceeds the allowed limit.

MaximumItemsToCompareExceededException:

The number of items to compare between the source or destination branches and the merge base has exceeded the maximum allowed.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

BatchDisassociateApprovalRuleTemplateFromRepositories

$result = $client->batchDisassociateApprovalRuleTemplateFromRepositories([/* ... */]);
$promise = $client->batchDisassociateApprovalRuleTemplateFromRepositoriesAsync([/* ... */]);

Removes the association between an approval rule template and one or more specified repositories.

Parameter Syntax

$result = $client->batchDisassociateApprovalRuleTemplateFromRepositories([
    'approvalRuleTemplateName' => '<string>', // REQUIRED
    'repositoryNames' => ['<string>', ...], // REQUIRED
]);

Parameter Details

Result Syntax

[
    'disassociatedRepositoryNames' => ['<string>', ...],
    'errors' => [
        [
            'errorCode' => '<string>',
            'errorMessage' => '<string>',
            'repositoryName' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

ApprovalRuleTemplateNameRequiredException:

An approval rule template name is required, but was not specified.

InvalidApprovalRuleTemplateNameException:

The name of the approval rule template is not valid. Template names must be between 1 and 100 valid characters in length. For more information about limits in CodeCommit, see Quotas in the CodeCommit User Guide.

ApprovalRuleTemplateDoesNotExistException:

The specified approval rule template does not exist. Verify that the name is correct and that you are signed in to the Amazon Web Services Region where the template was created, and then try again.

RepositoryNamesRequiredException:

At least one repository name object is required, but was not specified.

MaximumRepositoryNamesExceededException:

The maximum number of allowed repository names was exceeded. Currently, this number is 100.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

BatchGetCommits

$result = $client->batchGetCommits([/* ... */]);
$promise = $client->batchGetCommitsAsync([/* ... */]);

Returns information about the contents of one or more commits in a repository.

Parameter Syntax

$result = $client->batchGetCommits([
    'commitIds' => ['<string>', ...], // REQUIRED
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'commits' => [
        [
            'additionalData' => '<string>',
            'author' => [
                'date' => '<string>',
                'email' => '<string>',
                'name' => '<string>',
            ],
            'commitId' => '<string>',
            'committer' => [
                'date' => '<string>',
                'email' => '<string>',
                'name' => '<string>',
            ],
            'message' => '<string>',
            'parents' => ['<string>', ...],
            'treeId' => '<string>',
        ],
        // ...
    ],
    'errors' => [
        [
            'commitId' => '<string>',
            'errorCode' => '<string>',
            'errorMessage' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

CommitIdsListRequiredException:

A list of commit IDs is required, but was either not specified or the list was empty.

CommitIdsLimitExceededException:

The maximum number of allowed commit IDs in a batch request is 100. Verify that your batch requests contains no more than 100 commit IDs, and then try again.

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

BatchGetRepositories

$result = $client->batchGetRepositories([/* ... */]);
$promise = $client->batchGetRepositoriesAsync([/* ... */]);

Returns information about one or more repositories.

Parameter Syntax

$result = $client->batchGetRepositories([
    'repositoryNames' => ['<string>', ...], // REQUIRED
]);

Parameter Details

Result Syntax

[
    'errors' => [
        [
            'errorCode' => 'EncryptionIntegrityChecksFailedException|EncryptionKeyAccessDeniedException|EncryptionKeyDisabledException|EncryptionKeyNotFoundException|EncryptionKeyUnavailableException|RepositoryDoesNotExistException',
            'errorMessage' => '<string>',
            'repositoryId' => '<string>',
            'repositoryName' => '<string>',
        ],
        // ...
    ],
    'repositories' => [
        [
            'Arn' => '<string>',
            'accountId' => '<string>',
            'cloneUrlHttp' => '<string>',
            'cloneUrlSsh' => '<string>',
            'creationDate' => <DateTime>,
            'defaultBranch' => '<string>',
            'kmsKeyId' => '<string>',
            'lastModifiedDate' => <DateTime>,
            'repositoryDescription' => '<string>',
            'repositoryId' => '<string>',
            'repositoryName' => '<string>',
        ],
        // ...
    ],
    'repositoriesNotFound' => ['<string>', ...],
]

Result Details

Errors

RepositoryNamesRequiredException:

At least one repository name object is required, but was not specified.

MaximumRepositoryNamesExceededException:

The maximum number of allowed repository names was exceeded. Currently, this number is 100.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

CreateApprovalRuleTemplate

$result = $client->createApprovalRuleTemplate([/* ... */]);
$promise = $client->createApprovalRuleTemplateAsync([/* ... */]);

Creates a template for approval rules that can then be associated with one or more repositories in your Amazon Web Services account. When you associate a template with a repository, CodeCommit creates an approval rule that matches the conditions of the template for all pull requests that meet the conditions of the template. For more information, see AssociateApprovalRuleTemplateWithRepository.

Parameter Syntax

$result = $client->createApprovalRuleTemplate([
    'approvalRuleTemplateContent' => '<string>', // REQUIRED
    'approvalRuleTemplateDescription' => '<string>',
    'approvalRuleTemplateName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'approvalRuleTemplate' => [
        'approvalRuleTemplateContent' => '<string>',
        'approvalRuleTemplateDescription' => '<string>',
        'approvalRuleTemplateId' => '<string>',
        'approvalRuleTemplateName' => '<string>',
        'creationDate' => <DateTime>,
        'lastModifiedDate' => <DateTime>,
        'lastModifiedUser' => '<string>',
        'ruleContentSha256' => '<string>',
    ],
]

Result Details

Errors

ApprovalRuleTemplateNameRequiredException:

An approval rule template name is required, but was not specified.

InvalidApprovalRuleTemplateNameException:

The name of the approval rule template is not valid. Template names must be between 1 and 100 valid characters in length. For more information about limits in CodeCommit, see Quotas in the CodeCommit User Guide.

ApprovalRuleTemplateNameAlreadyExistsException:

You cannot create an approval rule template with that name because a template with that name already exists in this Amazon Web Services Region for your Amazon Web Services account. Approval rule template names must be unique.

ApprovalRuleTemplateContentRequiredException:

The content for the approval rule template is empty. You must provide some content for an approval rule template. The content cannot be null.

InvalidApprovalRuleTemplateContentException:

The content of the approval rule template is not valid.

InvalidApprovalRuleTemplateDescriptionException:

The description for the approval rule template is not valid because it exceeds the maximum characters allowed for a description. For more information about limits in CodeCommit, see Quotas in the CodeCommit User Guide.

NumberOfRuleTemplatesExceededException:

The maximum number of approval rule templates has been exceeded for this Amazon Web Services Region.

CreateBranch

$result = $client->createBranch([/* ... */]);
$promise = $client->createBranchAsync([/* ... */]);

Creates a branch in a repository and points the branch to a commit.

Parameter Syntax

$result = $client->createBranch([
    'branchName' => '<string>', // REQUIRED
    'commitId' => '<string>', // REQUIRED
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

BranchNameRequiredException:

A branch name is required, but was not specified.

BranchNameExistsException:

Cannot create the branch with the specified name because the commit conflicts with an existing branch with the same name. Branch names must be unique.

InvalidBranchNameException:

The specified reference name is not valid.

CommitIdRequiredException:

A commit ID was not specified.

CommitDoesNotExistException:

The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

InvalidCommitIdException:

The specified commit ID is not valid.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

CreateCommit

$result = $client->createCommit([/* ... */]);
$promise = $client->createCommitAsync([/* ... */]);

Creates a commit for a repository on the tip of a specified branch.

Parameter Syntax

$result = $client->createCommit([
    'authorName' => '<string>',
    'branchName' => '<string>', // REQUIRED
    'commitMessage' => '<string>',
    'deleteFiles' => [
        [
            'filePath' => '<string>', // REQUIRED
        ],
        // ...
    ],
    'email' => '<string>',
    'keepEmptyFolders' => true || false,
    'parentCommitId' => '<string>',
    'putFiles' => [
        [
            'fileContent' => <string || resource || Psr\Http\Message\StreamInterface>,
            'fileMode' => 'EXECUTABLE|NORMAL|SYMLINK',
            'filePath' => '<string>', // REQUIRED
            'sourceFile' => [
                'filePath' => '<string>', // REQUIRED
                'isMove' => true || false,
            ],
        ],
        // ...
    ],
    'repositoryName' => '<string>', // REQUIRED
    'setFileModes' => [
        [
            'fileMode' => 'EXECUTABLE|NORMAL|SYMLINK', // REQUIRED
            'filePath' => '<string>', // REQUIRED
        ],
        // ...
    ],
]);

Parameter Details

Result Syntax

[
    'commitId' => '<string>',
    'filesAdded' => [
        [
            'absolutePath' => '<string>',
            'blobId' => '<string>',
            'fileMode' => 'EXECUTABLE|NORMAL|SYMLINK',
        ],
        // ...
    ],
    'filesDeleted' => [
        [
            'absolutePath' => '<string>',
            'blobId' => '<string>',
            'fileMode' => 'EXECUTABLE|NORMAL|SYMLINK',
        ],
        // ...
    ],
    'filesUpdated' => [
        [
            'absolutePath' => '<string>',
            'blobId' => '<string>',
            'fileMode' => 'EXECUTABLE|NORMAL|SYMLINK',
        ],
        // ...
    ],
    'treeId' => '<string>',
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

ParentCommitIdRequiredException:

A parent commit ID is required. To view the full commit ID of a branch in a repository, use GetBranch or a Git command (for example, git pull or git log).

InvalidParentCommitIdException:

The parent commit ID is not valid. The commit ID cannot be empty, and must match the head commit ID for the branch of the repository where you want to add or update a file.

ParentCommitDoesNotExistException:

The parent commit ID is not valid because it does not exist. The specified parent commit ID does not exist in the specified branch of the repository.

ParentCommitIdOutdatedException:

The file could not be added because the provided parent commit ID is not the current tip of the specified branch. To view the full commit ID of the current head of the branch, use GetBranch.

BranchNameRequiredException:

A branch name is required, but was not specified.

InvalidBranchNameException:

The specified reference name is not valid.

BranchDoesNotExistException:

The specified branch does not exist.

BranchNameIsTagNameException:

The specified branch name is not valid because it is a tag name. Enter the name of a branch in the repository. For a list of valid branch names, use ListBranches.

FileEntryRequiredException:

The commit cannot be created because no files have been specified as added, updated, or changed (PutFile or DeleteFile) for the commit.

MaximumFileEntriesExceededException:

The number of specified files to change as part of this commit exceeds the maximum number of files that can be changed in a single commit. Consider using a Git client for these changes.

PutFileEntryConflictException:

The commit cannot be created because one or more files specified in the commit reference both a file and a folder.

SourceFileOrContentRequiredException:

The commit cannot be created because no source files or file content have been specified for the commit.

FileContentAndSourceFileSpecifiedException:

The commit cannot be created because both a source file and file content have been specified for the same file. You cannot provide both. Either specify a source file or provide the file content directly.

PathRequiredException:

The folderPath for a location cannot be null.

InvalidPathException:

The specified path is not valid.

SamePathRequestException:

The commit cannot be created because one or more changes in this commit duplicate actions in the same file path. For example, you cannot make the same delete request to the same file in the same file path twice, or make a delete request and a move request to the same file as part of the same commit.

FileDoesNotExistException:

The specified file does not exist. Verify that you have used the correct file name, full path, and extension.

FileContentSizeLimitExceededException:

The file cannot be added because it is too large. The maximum file size is 6 MB, and the combined file content change size is 7 MB. Consider making these changes using a Git client.

FolderContentSizeLimitExceededException:

The commit cannot be created because at least one of the overall changes in the commit results in a folder whose contents exceed the limit of 6 MB. Either reduce the number and size of your changes, or split the changes across multiple folders.

InvalidDeletionParameterException:

The specified deletion parameter is not valid.

RestrictedSourceFileException:

The commit cannot be created because one of the changes specifies copying or moving a .gitkeep file.

FileModeRequiredException:

The commit cannot be created because no file mode has been specified. A file mode is required to update mode permissions for a file.

InvalidFileModeException:

The specified file mode permission is not valid. For a list of valid file mode permissions, see PutFile.

NameLengthExceededException:

The user name is not valid because it has exceeded the character limit for author names.

InvalidEmailException:

The specified email address either contains one or more characters that are not allowed, or it exceeds the maximum number of characters allowed for an email address.

CommitMessageLengthExceededException:

The commit message is too long. Provide a shorter string.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

NoChangeException:

The commit cannot be created because no changes will be made to the repository as a result of this commit. A commit must contain at least one change.

FileNameConflictsWithDirectoryNameException:

A file cannot be added to the repository because the specified file name has the same name as a directory in this repository. Either provide another name for the file, or add the file in a directory that does not match the file name.

DirectoryNameConflictsWithFileNameException:

A file cannot be added to the repository because the specified path name has the same name as a file that already exists in this repository. Either provide a different name for the file, or specify a different path for the file.

FilePathConflictsWithSubmodulePathException:

The commit cannot be created because a specified file path points to a submodule. Verify that the destination files have valid file paths that do not point to a submodule.

CreatePullRequest

$result = $client->createPullRequest([/* ... */]);
$promise = $client->createPullRequestAsync([/* ... */]);

Creates a pull request in the specified repository.

Parameter Syntax

$result = $client->createPullRequest([
    'clientRequestToken' => '<string>',
    'description' => '<string>',
    'targets' => [ // REQUIRED
        [
            'destinationReference' => '<string>',
            'repositoryName' => '<string>', // REQUIRED
            'sourceReference' => '<string>', // REQUIRED
        ],
        // ...
    ],
    'title' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'pullRequest' => [
        'approvalRules' => [
            [
                'approvalRuleContent' => '<string>',
                'approvalRuleId' => '<string>',
                'approvalRuleName' => '<string>',
                'creationDate' => <DateTime>,
                'lastModifiedDate' => <DateTime>,
                'lastModifiedUser' => '<string>',
                'originApprovalRuleTemplate' => [
                    'approvalRuleTemplateId' => '<string>',
                    'approvalRuleTemplateName' => '<string>',
                ],
                'ruleContentSha256' => '<string>',
            ],
            // ...
        ],
        'authorArn' => '<string>',
        'clientRequestToken' => '<string>',
        'creationDate' => <DateTime>,
        'description' => '<string>',
        'lastActivityDate' => <DateTime>,
        'pullRequestId' => '<string>',
        'pullRequestStatus' => 'OPEN|CLOSED',
        'pullRequestTargets' => [
            [
                'destinationCommit' => '<string>',
                'destinationReference' => '<string>',
                'mergeBase' => '<string>',
                'mergeMetadata' => [
                    'isMerged' => true || false,
                    'mergeCommitId' => '<string>',
                    'mergeOption' => 'FAST_FORWARD_MERGE|SQUASH_MERGE|THREE_WAY_MERGE',
                    'mergedBy' => '<string>',
                ],
                'repositoryName' => '<string>',
                'sourceCommit' => '<string>',
                'sourceReference' => '<string>',
            ],
            // ...
        ],
        'revisionId' => '<string>',
        'title' => '<string>',
    ],
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

ClientRequestTokenRequiredException:

A client request token is required. A client request token is an unique, client-generated idempotency token that, when provided in a request, ensures the request cannot be repeated with a changed parameter. If a request is received with the same parameters and a token is included, the request returns information about the initial request that used that token.

InvalidClientRequestTokenException:

The client request token is not valid.

IdempotencyParameterMismatchException:

The client request token is not valid. Either the token is not in a valid format, or the token has been used in a previous request and cannot be reused.

ReferenceNameRequiredException:

A reference name is required, but none was provided.

InvalidReferenceNameException:

The specified reference name format is not valid. Reference names must conform to the Git references format (for example, refs/heads/main). For more information, see Git Internals - Git References or consult your Git documentation.

ReferenceDoesNotExistException:

The specified reference does not exist. You must provide a full commit ID.

ReferenceTypeNotSupportedException:

The specified reference is not a supported type.

TitleRequiredException:

A pull request title is required. It cannot be empty or null.

InvalidTitleException:

The title of the pull request is not valid. Pull request titles cannot exceed 100 characters in length.

InvalidDescriptionException:

The pull request description is not valid. Descriptions cannot be more than 1,000 characters.

TargetsRequiredException:

An array of target objects is required. It cannot be empty or null.

InvalidTargetsException:

The targets for the pull request is not valid or not in a valid format. Targets are a list of target objects. Each target object must contain the full values for the repository name, source branch, and destination branch for a pull request.

TargetRequiredException:

A pull request target is required. It cannot be empty or null. A pull request target must contain the full values for the repository name, source branch, and destination branch for the pull request.

InvalidTargetException:

The target for the pull request is not valid. A target must contain the full values for the repository name, source branch, and destination branch for the pull request.

MultipleRepositoriesInPullRequestException:

You cannot include more than one repository in a pull request. Make sure you have specified only one repository name in your request, and then try again.

MaximumOpenPullRequestsExceededException:

You cannot create the pull request because the repository has too many open pull requests. The maximum number of open pull requests for a repository is 1,000. Close one or more open pull requests, and then try again.

SourceAndDestinationAreSameException:

The source branch and destination branch for the pull request are the same. You must specify different branches for the source and destination.

CreatePullRequestApprovalRule

$result = $client->createPullRequestApprovalRule([/* ... */]);
$promise = $client->createPullRequestApprovalRuleAsync([/* ... */]);

Creates an approval rule for a pull request.

Parameter Syntax

$result = $client->createPullRequestApprovalRule([
    'approvalRuleContent' => '<string>', // REQUIRED
    'approvalRuleName' => '<string>', // REQUIRED
    'pullRequestId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'approvalRule' => [
        'approvalRuleContent' => '<string>',
        'approvalRuleId' => '<string>',
        'approvalRuleName' => '<string>',
        'creationDate' => <DateTime>,
        'lastModifiedDate' => <DateTime>,
        'lastModifiedUser' => '<string>',
        'originApprovalRuleTemplate' => [
            'approvalRuleTemplateId' => '<string>',
            'approvalRuleTemplateName' => '<string>',
        ],
        'ruleContentSha256' => '<string>',
    ],
]

Result Details

Errors

ApprovalRuleNameRequiredException:

An approval rule name is required, but was not specified.

InvalidApprovalRuleNameException:

The name for the approval rule is not valid.

ApprovalRuleNameAlreadyExistsException:

An approval rule with that name already exists. Approval rule names must be unique within the scope of a pull request.

ApprovalRuleContentRequiredException:

The content for the approval rule is empty. You must provide some content for an approval rule. The content cannot be null.

InvalidApprovalRuleContentException:

The content for the approval rule is not valid.

NumberOfRulesExceededException:

The approval rule cannot be added. The pull request has the maximum number of approval rules associated with it.

PullRequestDoesNotExistException:

The pull request ID could not be found. Make sure that you have specified the correct repository name and pull request ID, and then try again.

InvalidPullRequestIdException:

The pull request ID is not valid. Make sure that you have provided the full ID and that the pull request is in the specified repository, and then try again.

PullRequestIdRequiredException:

A pull request ID is required, but none was provided.

PullRequestAlreadyClosedException:

The pull request status cannot be updated because it is already closed.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

CreateRepository

$result = $client->createRepository([/* ... */]);
$promise = $client->createRepositoryAsync([/* ... */]);

Creates a new, empty repository.

Parameter Syntax

$result = $client->createRepository([
    'kmsKeyId' => '<string>',
    'repositoryDescription' => '<string>',
    'repositoryName' => '<string>', // REQUIRED
    'tags' => ['<string>', ...],
]);

Parameter Details

Result Syntax

[
    'repositoryMetadata' => [
        'Arn' => '<string>',
        'accountId' => '<string>',
        'cloneUrlHttp' => '<string>',
        'cloneUrlSsh' => '<string>',
        'creationDate' => <DateTime>,
        'defaultBranch' => '<string>',
        'kmsKeyId' => '<string>',
        'lastModifiedDate' => <DateTime>,
        'repositoryDescription' => '<string>',
        'repositoryId' => '<string>',
        'repositoryName' => '<string>',
    ],
]

Result Details

Errors

RepositoryNameExistsException:

The specified repository name already exists.

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

InvalidRepositoryDescriptionException:

The specified repository description is not valid.

RepositoryLimitExceededException:

A repository resource limit was exceeded.

OperationNotAllowedException:

The requested action is not allowed.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

EncryptionKeyInvalidIdException:

The Key Management Service encryption key is not valid.

EncryptionKeyInvalidUsageException:

A KMS encryption key was used to try and encrypt or decrypt a repository, but either the repository or the key was not in a valid state to support the operation.

InvalidTagsMapException:

The map of tags is not valid.

TooManyTagsException:

The maximum number of tags for an CodeCommit resource has been exceeded.

InvalidSystemTagUsageException:

The specified tag is not valid. Key names cannot be prefixed with aws:.

TagPolicyException:

The tag policy is not valid.

CreateUnreferencedMergeCommit

$result = $client->createUnreferencedMergeCommit([/* ... */]);
$promise = $client->createUnreferencedMergeCommitAsync([/* ... */]);

Creates an unreferenced commit that represents the result of merging two branches using a specified merge strategy. This can help you determine the outcome of a potential merge. This API cannot be used with the fast-forward merge strategy because that strategy does not create a merge commit.

Parameter Syntax

$result = $client->createUnreferencedMergeCommit([
    'authorName' => '<string>',
    'commitMessage' => '<string>',
    'conflictDetailLevel' => 'FILE_LEVEL|LINE_LEVEL',
    'conflictResolution' => [
        'deleteFiles' => [
            [
                'filePath' => '<string>', // REQUIRED
            ],
            // ...
        ],
        'replaceContents' => [
            [
                'content' => <string || resource || Psr\Http\Message\StreamInterface>,
                'fileMode' => 'EXECUTABLE|NORMAL|SYMLINK',
                'filePath' => '<string>', // REQUIRED
                'replacementType' => 'KEEP_BASE|KEEP_SOURCE|KEEP_DESTINATION|USE_NEW_CONTENT', // REQUIRED
            ],
            // ...
        ],
        'setFileModes' => [
            [
                'fileMode' => 'EXECUTABLE|NORMAL|SYMLINK', // REQUIRED
                'filePath' => '<string>', // REQUIRED
            ],
            // ...
        ],
    ],
    'conflictResolutionStrategy' => 'NONE|ACCEPT_SOURCE|ACCEPT_DESTINATION|AUTOMERGE',
    'destinationCommitSpecifier' => '<string>', // REQUIRED
    'email' => '<string>',
    'keepEmptyFolders' => true || false,
    'mergeOption' => 'FAST_FORWARD_MERGE|SQUASH_MERGE|THREE_WAY_MERGE', // REQUIRED
    'repositoryName' => '<string>', // REQUIRED
    'sourceCommitSpecifier' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'commitId' => '<string>',
    'treeId' => '<string>',
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

TipsDivergenceExceededException:

The divergence between the tips of the provided commit specifiers is too great to determine whether there might be any merge conflicts. Locally compare the specifiers using git diff or a diff tool.

CommitRequiredException:

A commit was not specified.

InvalidCommitException:

The specified commit is not valid.

CommitDoesNotExistException:

The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

MergeOptionRequiredException:

A merge option or stategy is required, and none was provided.

InvalidMergeOptionException:

The specified merge option is not valid for this operation. Not all merge strategies are supported for all operations.

InvalidConflictDetailLevelException:

The specified conflict detail level is not valid.

InvalidConflictResolutionStrategyException:

The specified conflict resolution strategy is not valid.

InvalidConflictResolutionException:

The specified conflict resolution list is not valid.

ManualMergeRequiredException:

The pull request cannot be merged automatically into the destination branch. You must manually merge the branches and resolve any conflicts.

MaximumConflictResolutionEntriesExceededException:

The number of allowed conflict resolution entries was exceeded.

MultipleConflictResolutionEntriesException:

More than one conflict resolution entries exists for the conflict. A conflict can have only one conflict resolution entry.

ReplacementTypeRequiredException:

A replacement type is required.

InvalidReplacementTypeException:

Automerge was specified for resolving the conflict, but the specified replacement type is not valid.

ReplacementContentRequiredException:

USE_NEW_CONTENT was specified, but no replacement content has been provided.

InvalidReplacementContentException:

Automerge was specified for resolving the conflict, but the replacement type is not valid or content is missing.

PathRequiredException:

The folderPath for a location cannot be null.

InvalidPathException:

The specified path is not valid.

FileContentSizeLimitExceededException:

The file cannot be added because it is too large. The maximum file size is 6 MB, and the combined file content change size is 7 MB. Consider making these changes using a Git client.

FolderContentSizeLimitExceededException:

The commit cannot be created because at least one of the overall changes in the commit results in a folder whose contents exceed the limit of 6 MB. Either reduce the number and size of your changes, or split the changes across multiple folders.

MaximumFileContentToLoadExceededException:

The number of files to load exceeds the allowed limit.

MaximumItemsToCompareExceededException:

The number of items to compare between the source or destination branches and the merge base has exceeded the maximum allowed.

ConcurrentReferenceUpdateException:

The merge cannot be completed because the target branch has been modified. Another user might have modified the target branch while the merge was in progress. Wait a few minutes, and then try again.

FileModeRequiredException:

The commit cannot be created because no file mode has been specified. A file mode is required to update mode permissions for a file.

InvalidFileModeException:

The specified file mode permission is not valid. For a list of valid file mode permissions, see PutFile.

NameLengthExceededException:

The user name is not valid because it has exceeded the character limit for author names.

InvalidEmailException:

The specified email address either contains one or more characters that are not allowed, or it exceeds the maximum number of characters allowed for an email address.

CommitMessageLengthExceededException:

The commit message is too long. Provide a shorter string.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

DeleteApprovalRuleTemplate

$result = $client->deleteApprovalRuleTemplate([/* ... */]);
$promise = $client->deleteApprovalRuleTemplateAsync([/* ... */]);

Deletes a specified approval rule template. Deleting a template does not remove approval rules on pull requests already created with the template.

Parameter Syntax

$result = $client->deleteApprovalRuleTemplate([
    'approvalRuleTemplateName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'approvalRuleTemplateId' => '<string>',
]

Result Details

Errors

ApprovalRuleTemplateNameRequiredException:

An approval rule template name is required, but was not specified.

InvalidApprovalRuleTemplateNameException:

The name of the approval rule template is not valid. Template names must be between 1 and 100 valid characters in length. For more information about limits in CodeCommit, see Quotas in the CodeCommit User Guide.

ApprovalRuleTemplateInUseException:

The approval rule template is associated with one or more repositories. You cannot delete a template that is associated with a repository. Remove all associations, and then try again.

DeleteBranch

$result = $client->deleteBranch([/* ... */]);
$promise = $client->deleteBranchAsync([/* ... */]);

Deletes a branch from a repository, unless that branch is the default branch for the repository.

Parameter Syntax

$result = $client->deleteBranch([
    'branchName' => '<string>', // REQUIRED
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'deletedBranch' => [
        'branchName' => '<string>',
        'commitId' => '<string>',
    ],
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

RepositoryDoesNotExistException:

The specified repository does not exist.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

BranchNameRequiredException:

A branch name is required, but was not specified.

InvalidBranchNameException:

The specified reference name is not valid.

DefaultBranchCannotBeDeletedException:

The specified branch is the default branch for the repository, and cannot be deleted. To delete this branch, you must first set another branch as the default branch.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

DeleteCommentContent

$result = $client->deleteCommentContent([/* ... */]);
$promise = $client->deleteCommentContentAsync([/* ... */]);

Deletes the content of a comment made on a change, file, or commit in a repository.

Parameter Syntax

$result = $client->deleteCommentContent([
    'commentId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'comment' => [
        'authorArn' => '<string>',
        'callerReactions' => ['<string>', ...],
        'clientRequestToken' => '<string>',
        'commentId' => '<string>',
        'content' => '<string>',
        'creationDate' => <DateTime>,
        'deleted' => true || false,
        'inReplyTo' => '<string>',
        'lastModifiedDate' => <DateTime>,
        'reactionCounts' => [<integer>, ...],
    ],
]

Result Details

Errors

CommentDoesNotExistException:

No comment exists with the provided ID. Verify that you have used the correct ID, and then try again.

CommentIdRequiredException:

The comment ID is missing or null. A comment ID is required.

InvalidCommentIdException:

The comment ID is not in a valid format. Make sure that you have provided the full comment ID.

CommentDeletedException:

This comment has already been deleted. You cannot edit or delete a deleted comment.

DeleteFile

$result = $client->deleteFile([/* ... */]);
$promise = $client->deleteFileAsync([/* ... */]);

Deletes a specified file from a specified branch. A commit is created on the branch that contains the revision. The file still exists in the commits earlier to the commit that contains the deletion.

Parameter Syntax

$result = $client->deleteFile([
    'branchName' => '<string>', // REQUIRED
    'commitMessage' => '<string>',
    'email' => '<string>',
    'filePath' => '<string>', // REQUIRED
    'keepEmptyFolders' => true || false,
    'name' => '<string>',
    'parentCommitId' => '<string>', // REQUIRED
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'blobId' => '<string>',
    'commitId' => '<string>',
    'filePath' => '<string>',
    'treeId' => '<string>',
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

ParentCommitIdRequiredException:

A parent commit ID is required. To view the full commit ID of a branch in a repository, use GetBranch or a Git command (for example, git pull or git log).

InvalidParentCommitIdException:

The parent commit ID is not valid. The commit ID cannot be empty, and must match the head commit ID for the branch of the repository where you want to add or update a file.

ParentCommitDoesNotExistException:

The parent commit ID is not valid because it does not exist. The specified parent commit ID does not exist in the specified branch of the repository.

ParentCommitIdOutdatedException:

The file could not be added because the provided parent commit ID is not the current tip of the specified branch. To view the full commit ID of the current head of the branch, use GetBranch.

PathRequiredException:

The folderPath for a location cannot be null.

InvalidPathException:

The specified path is not valid.

FileDoesNotExistException:

The specified file does not exist. Verify that you have used the correct file name, full path, and extension.

BranchNameRequiredException:

A branch name is required, but was not specified.

InvalidBranchNameException:

The specified reference name is not valid.

BranchDoesNotExistException:

The specified branch does not exist.

BranchNameIsTagNameException:

The specified branch name is not valid because it is a tag name. Enter the name of a branch in the repository. For a list of valid branch names, use ListBranches.

NameLengthExceededException:

The user name is not valid because it has exceeded the character limit for author names.

InvalidEmailException:

The specified email address either contains one or more characters that are not allowed, or it exceeds the maximum number of characters allowed for an email address.

CommitMessageLengthExceededException:

The commit message is too long. Provide a shorter string.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

DeletePullRequestApprovalRule

$result = $client->deletePullRequestApprovalRule([/* ... */]);
$promise = $client->deletePullRequestApprovalRuleAsync([/* ... */]);

Deletes an approval rule from a specified pull request. Approval rules can be deleted from a pull request only if the pull request is open, and if the approval rule was created specifically for a pull request and not generated from an approval rule template associated with the repository where the pull request was created. You cannot delete an approval rule from a merged or closed pull request.

Parameter Syntax

$result = $client->deletePullRequestApprovalRule([
    'approvalRuleName' => '<string>', // REQUIRED
    'pullRequestId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'approvalRuleId' => '<string>',
]

Result Details

Errors

PullRequestDoesNotExistException:

The pull request ID could not be found. Make sure that you have specified the correct repository name and pull request ID, and then try again.

InvalidPullRequestIdException:

The pull request ID is not valid. Make sure that you have provided the full ID and that the pull request is in the specified repository, and then try again.

PullRequestIdRequiredException:

A pull request ID is required, but none was provided.

PullRequestAlreadyClosedException:

The pull request status cannot be updated because it is already closed.

ApprovalRuleNameRequiredException:

An approval rule name is required, but was not specified.

InvalidApprovalRuleNameException:

The name for the approval rule is not valid.

CannotDeleteApprovalRuleFromTemplateException:

The approval rule cannot be deleted from the pull request because it was created by an approval rule template and applied to the pull request automatically.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

DeleteRepository

$result = $client->deleteRepository([/* ... */]);
$promise = $client->deleteRepositoryAsync([/* ... */]);

Deletes a repository. If a specified repository was already deleted, a null repository ID is returned.

Parameter Syntax

$result = $client->deleteRepository([
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'repositoryId' => '<string>',
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

DescribeMergeConflicts

$result = $client->describeMergeConflicts([/* ... */]);
$promise = $client->describeMergeConflictsAsync([/* ... */]);

Returns information about one or more merge conflicts in the attempted merge of two commit specifiers using the squash or three-way merge strategy. If the merge option for the attempted merge is specified as FAST_FORWARD_MERGE, an exception is thrown.

Parameter Syntax

$result = $client->describeMergeConflicts([
    'conflictDetailLevel' => 'FILE_LEVEL|LINE_LEVEL',
    'conflictResolutionStrategy' => 'NONE|ACCEPT_SOURCE|ACCEPT_DESTINATION|AUTOMERGE',
    'destinationCommitSpecifier' => '<string>', // REQUIRED
    'filePath' => '<string>', // REQUIRED
    'maxMergeHunks' => <integer>,
    'mergeOption' => 'FAST_FORWARD_MERGE|SQUASH_MERGE|THREE_WAY_MERGE', // REQUIRED
    'nextToken' => '<string>',
    'repositoryName' => '<string>', // REQUIRED
    'sourceCommitSpecifier' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'baseCommitId' => '<string>',
    'conflictMetadata' => [
        'contentConflict' => true || false,
        'fileModeConflict' => true || false,
        'fileModes' => [
            'base' => 'EXECUTABLE|NORMAL|SYMLINK',
            'destination' => 'EXECUTABLE|NORMAL|SYMLINK',
            'source' => 'EXECUTABLE|NORMAL|SYMLINK',
        ],
        'filePath' => '<string>',
        'fileSizes' => [
            'base' => <integer>,
            'destination' => <integer>,
            'source' => <integer>,
        ],
        'isBinaryFile' => [
            'base' => true || false,
            'destination' => true || false,
            'source' => true || false,
        ],
        'mergeOperations' => [
            'destination' => 'A|M|D',
            'source' => 'A|M|D',
        ],
        'numberOfConflicts' => <integer>,
        'objectTypeConflict' => true || false,
        'objectTypes' => [
            'base' => 'FILE|DIRECTORY|GIT_LINK|SYMBOLIC_LINK',
            'destination' => 'FILE|DIRECTORY|GIT_LINK|SYMBOLIC_LINK',
            'source' => 'FILE|DIRECTORY|GIT_LINK|SYMBOLIC_LINK',
        ],
    ],
    'destinationCommitId' => '<string>',
    'mergeHunks' => [
        [
            'base' => [
                'endLine' => <integer>,
                'hunkContent' => '<string>',
                'startLine' => <integer>,
            ],
            'destination' => [
                'endLine' => <integer>,
                'hunkContent' => '<string>',
                'startLine' => <integer>,
            ],
            'isConflict' => true || false,
            'source' => [
                'endLine' => <integer>,
                'hunkContent' => '<string>',
                'startLine' => <integer>,
            ],
        ],
        // ...
    ],
    'nextToken' => '<string>',
    'sourceCommitId' => '<string>',
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

MergeOptionRequiredException:

A merge option or stategy is required, and none was provided.

InvalidMergeOptionException:

The specified merge option is not valid for this operation. Not all merge strategies are supported for all operations.

InvalidContinuationTokenException:

The specified continuation token is not valid.

CommitRequiredException:

A commit was not specified.

CommitDoesNotExistException:

The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

InvalidCommitException:

The specified commit is not valid.

TipsDivergenceExceededException:

The divergence between the tips of the provided commit specifiers is too great to determine whether there might be any merge conflicts. Locally compare the specifiers using git diff or a diff tool.

PathRequiredException:

The folderPath for a location cannot be null.

InvalidPathException:

The specified path is not valid.

FileDoesNotExistException:

The specified file does not exist. Verify that you have used the correct file name, full path, and extension.

InvalidMaxMergeHunksException:

The specified value for the number of merge hunks to return is not valid.

InvalidConflictDetailLevelException:

The specified conflict detail level is not valid.

InvalidConflictResolutionStrategyException:

The specified conflict resolution strategy is not valid.

MaximumFileContentToLoadExceededException:

The number of files to load exceeds the allowed limit.

MaximumItemsToCompareExceededException:

The number of items to compare between the source or destination branches and the merge base has exceeded the maximum allowed.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

DescribePullRequestEvents

$result = $client->describePullRequestEvents([/* ... */]);
$promise = $client->describePullRequestEventsAsync([/* ... */]);

Returns information about one or more pull request events.

Parameter Syntax

$result = $client->describePullRequestEvents([
    'actorArn' => '<string>',
    'maxResults' => <integer>,
    'nextToken' => '<string>',
    'pullRequestEventType' => 'PULL_REQUEST_CREATED|PULL_REQUEST_STATUS_CHANGED|PULL_REQUEST_SOURCE_REFERENCE_UPDATED|PULL_REQUEST_MERGE_STATE_CHANGED|PULL_REQUEST_APPROVAL_RULE_CREATED|PULL_REQUEST_APPROVAL_RULE_UPDATED|PULL_REQUEST_APPROVAL_RULE_DELETED|PULL_REQUEST_APPROVAL_RULE_OVERRIDDEN|PULL_REQUEST_APPROVAL_STATE_CHANGED',
    'pullRequestId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'nextToken' => '<string>',
    'pullRequestEvents' => [
        [
            'actorArn' => '<string>',
            'approvalRuleEventMetadata' => [
                'approvalRuleContent' => '<string>',
                'approvalRuleId' => '<string>',
                'approvalRuleName' => '<string>',
            ],
            'approvalRuleOverriddenEventMetadata' => [
                'overrideStatus' => 'OVERRIDE|REVOKE',
                'revisionId' => '<string>',
            ],
            'approvalStateChangedEventMetadata' => [
                'approvalStatus' => 'APPROVE|REVOKE',
                'revisionId' => '<string>',
            ],
            'eventDate' => <DateTime>,
            'pullRequestCreatedEventMetadata' => [
                'destinationCommitId' => '<string>',
                'mergeBase' => '<string>',
                'repositoryName' => '<string>',
                'sourceCommitId' => '<string>',
            ],
            'pullRequestEventType' => 'PULL_REQUEST_CREATED|PULL_REQUEST_STATUS_CHANGED|PULL_REQUEST_SOURCE_REFERENCE_UPDATED|PULL_REQUEST_MERGE_STATE_CHANGED|PULL_REQUEST_APPROVAL_RULE_CREATED|PULL_REQUEST_APPROVAL_RULE_UPDATED|PULL_REQUEST_APPROVAL_RULE_DELETED|PULL_REQUEST_APPROVAL_RULE_OVERRIDDEN|PULL_REQUEST_APPROVAL_STATE_CHANGED',
            'pullRequestId' => '<string>',
            'pullRequestMergedStateChangedEventMetadata' => [
                'destinationReference' => '<string>',
                'mergeMetadata' => [
                    'isMerged' => true || false,
                    'mergeCommitId' => '<string>',
                    'mergeOption' => 'FAST_FORWARD_MERGE|SQUASH_MERGE|THREE_WAY_MERGE',
                    'mergedBy' => '<string>',
                ],
                'repositoryName' => '<string>',
            ],
            'pullRequestSourceReferenceUpdatedEventMetadata' => [
                'afterCommitId' => '<string>',
                'beforeCommitId' => '<string>',
                'mergeBase' => '<string>',
                'repositoryName' => '<string>',
            ],
            'pullRequestStatusChangedEventMetadata' => [
                'pullRequestStatus' => 'OPEN|CLOSED',
            ],
        ],
        // ...
    ],
]

Result Details

Errors

PullRequestDoesNotExistException:

The pull request ID could not be found. Make sure that you have specified the correct repository name and pull request ID, and then try again.

InvalidPullRequestIdException:

The pull request ID is not valid. Make sure that you have provided the full ID and that the pull request is in the specified repository, and then try again.

PullRequestIdRequiredException:

A pull request ID is required, but none was provided.

InvalidPullRequestEventTypeException:

The pull request event type is not valid.

InvalidActorArnException:

The Amazon Resource Name (ARN) is not valid. Make sure that you have provided the full ARN for the user who initiated the change for the pull request, and then try again.

ActorDoesNotExistException:

The specified Amazon Resource Name (ARN) does not exist in the Amazon Web Services account.

InvalidMaxResultsException:

The specified number of maximum results is not valid.

InvalidContinuationTokenException:

The specified continuation token is not valid.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

DisassociateApprovalRuleTemplateFromRepository

$result = $client->disassociateApprovalRuleTemplateFromRepository([/* ... */]);
$promise = $client->disassociateApprovalRuleTemplateFromRepositoryAsync([/* ... */]);

Removes the association between a template and a repository so that approval rules based on the template are not automatically created when pull requests are created in the specified repository. This does not delete any approval rules previously created for pull requests through the template association.

Parameter Syntax

$result = $client->disassociateApprovalRuleTemplateFromRepository([
    'approvalRuleTemplateName' => '<string>', // REQUIRED
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

ApprovalRuleTemplateNameRequiredException:

An approval rule template name is required, but was not specified.

InvalidApprovalRuleTemplateNameException:

The name of the approval rule template is not valid. Template names must be between 1 and 100 valid characters in length. For more information about limits in CodeCommit, see Quotas in the CodeCommit User Guide.

ApprovalRuleTemplateDoesNotExistException:

The specified approval rule template does not exist. Verify that the name is correct and that you are signed in to the Amazon Web Services Region where the template was created, and then try again.

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

EvaluatePullRequestApprovalRules

$result = $client->evaluatePullRequestApprovalRules([/* ... */]);
$promise = $client->evaluatePullRequestApprovalRulesAsync([/* ... */]);

Evaluates whether a pull request has met all the conditions specified in its associated approval rules.

Parameter Syntax

$result = $client->evaluatePullRequestApprovalRules([
    'pullRequestId' => '<string>', // REQUIRED
    'revisionId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'evaluation' => [
        'approvalRulesNotSatisfied' => ['<string>', ...],
        'approvalRulesSatisfied' => ['<string>', ...],
        'approved' => true || false,
        'overridden' => true || false,
    ],
]

Result Details

Errors

PullRequestDoesNotExistException:

The pull request ID could not be found. Make sure that you have specified the correct repository name and pull request ID, and then try again.

InvalidPullRequestIdException:

The pull request ID is not valid. Make sure that you have provided the full ID and that the pull request is in the specified repository, and then try again.

PullRequestIdRequiredException:

A pull request ID is required, but none was provided.

InvalidRevisionIdException:

The revision ID is not valid. Use GetPullRequest to determine the value.

RevisionIdRequiredException:

A revision ID is required, but was not provided.

RevisionNotCurrentException:

The revision ID provided in the request does not match the current revision ID. Use GetPullRequest to retrieve the current revision ID.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetApprovalRuleTemplate

$result = $client->getApprovalRuleTemplate([/* ... */]);
$promise = $client->getApprovalRuleTemplateAsync([/* ... */]);

Returns information about a specified approval rule template.

Parameter Syntax

$result = $client->getApprovalRuleTemplate([
    'approvalRuleTemplateName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'approvalRuleTemplate' => [
        'approvalRuleTemplateContent' => '<string>',
        'approvalRuleTemplateDescription' => '<string>',
        'approvalRuleTemplateId' => '<string>',
        'approvalRuleTemplateName' => '<string>',
        'creationDate' => <DateTime>,
        'lastModifiedDate' => <DateTime>,
        'lastModifiedUser' => '<string>',
        'ruleContentSha256' => '<string>',
    ],
]

Result Details

Errors

ApprovalRuleTemplateNameRequiredException:

An approval rule template name is required, but was not specified.

InvalidApprovalRuleTemplateNameException:

The name of the approval rule template is not valid. Template names must be between 1 and 100 valid characters in length. For more information about limits in CodeCommit, see Quotas in the CodeCommit User Guide.

ApprovalRuleTemplateDoesNotExistException:

The specified approval rule template does not exist. Verify that the name is correct and that you are signed in to the Amazon Web Services Region where the template was created, and then try again.

GetBlob

$result = $client->getBlob([/* ... */]);
$promise = $client->getBlobAsync([/* ... */]);

Returns the base-64 encoded content of an individual blob in a repository.

Parameter Syntax

$result = $client->getBlob([
    'blobId' => '<string>', // REQUIRED
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'content' => <string || resource || Psr\Http\Message\StreamInterface>,
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

BlobIdRequiredException:

A blob ID is required, but was not specified.

InvalidBlobIdException:

The specified blob is not valid.

BlobIdDoesNotExistException:

The specified blob does not exist.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

FileTooLargeException:

The specified file exceeds the file size limit for CodeCommit. For more information about limits in CodeCommit, see Quotas in the CodeCommit User Guide.

GetBranch

$result = $client->getBranch([/* ... */]);
$promise = $client->getBranchAsync([/* ... */]);

Returns information about a repository branch, including its name and the last commit ID.

Parameter Syntax

$result = $client->getBranch([
    'branchName' => '<string>',
    'repositoryName' => '<string>',
]);

Parameter Details

Result Syntax

[
    'branch' => [
        'branchName' => '<string>',
        'commitId' => '<string>',
    ],
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

RepositoryDoesNotExistException:

The specified repository does not exist.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

BranchNameRequiredException:

A branch name is required, but was not specified.

InvalidBranchNameException:

The specified reference name is not valid.

BranchDoesNotExistException:

The specified branch does not exist.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetComment

$result = $client->getComment([/* ... */]);
$promise = $client->getCommentAsync([/* ... */]);

Returns the content of a comment made on a change, file, or commit in a repository.

Parameter Syntax

$result = $client->getComment([
    'commentId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'comment' => [
        'authorArn' => '<string>',
        'callerReactions' => ['<string>', ...],
        'clientRequestToken' => '<string>',
        'commentId' => '<string>',
        'content' => '<string>',
        'creationDate' => <DateTime>,
        'deleted' => true || false,
        'inReplyTo' => '<string>',
        'lastModifiedDate' => <DateTime>,
        'reactionCounts' => [<integer>, ...],
    ],
]

Result Details

Errors

CommentDoesNotExistException:

No comment exists with the provided ID. Verify that you have used the correct ID, and then try again.

CommentDeletedException:

This comment has already been deleted. You cannot edit or delete a deleted comment.

CommentIdRequiredException:

The comment ID is missing or null. A comment ID is required.

InvalidCommentIdException:

The comment ID is not in a valid format. Make sure that you have provided the full comment ID.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetCommentReactions

$result = $client->getCommentReactions([/* ... */]);
$promise = $client->getCommentReactionsAsync([/* ... */]);

Returns information about reactions to a specified comment ID. Reactions from users who have been deleted will not be included in the count.

Parameter Syntax

$result = $client->getCommentReactions([
    'commentId' => '<string>', // REQUIRED
    'maxResults' => <integer>,
    'nextToken' => '<string>',
    'reactionUserArn' => '<string>',
]);

Parameter Details

Result Syntax

[
    'nextToken' => '<string>',
    'reactionsForComment' => [
        [
            'reaction' => [
                'emoji' => '<string>',
                'shortCode' => '<string>',
                'unicode' => '<string>',
            ],
            'reactionUsers' => ['<string>', ...],
            'reactionsFromDeletedUsersCount' => <integer>,
        ],
        // ...
    ],
]

Result Details

Errors

CommentDoesNotExistException:

No comment exists with the provided ID. Verify that you have used the correct ID, and then try again.

CommentIdRequiredException:

The comment ID is missing or null. A comment ID is required.

InvalidCommentIdException:

The comment ID is not in a valid format. Make sure that you have provided the full comment ID.

InvalidReactionUserArnException:

The Amazon Resource Name (ARN) of the user or identity is not valid.

InvalidMaxResultsException:

The specified number of maximum results is not valid.

InvalidContinuationTokenException:

The specified continuation token is not valid.

CommentDeletedException:

This comment has already been deleted. You cannot edit or delete a deleted comment.

GetCommentsForComparedCommit

$result = $client->getCommentsForComparedCommit([/* ... */]);
$promise = $client->getCommentsForComparedCommitAsync([/* ... */]);

Returns information about comments made on the comparison between two commits.

Parameter Syntax

$result = $client->getCommentsForComparedCommit([
    'afterCommitId' => '<string>', // REQUIRED
    'beforeCommitId' => '<string>',
    'maxResults' => <integer>,
    'nextToken' => '<string>',
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'commentsForComparedCommitData' => [
        [
            'afterBlobId' => '<string>',
            'afterCommitId' => '<string>',
            'beforeBlobId' => '<string>',
            'beforeCommitId' => '<string>',
            'comments' => [
                [
                    'authorArn' => '<string>',
                    'callerReactions' => ['<string>', ...],
                    'clientRequestToken' => '<string>',
                    'commentId' => '<string>',
                    'content' => '<string>',
                    'creationDate' => <DateTime>,
                    'deleted' => true || false,
                    'inReplyTo' => '<string>',
                    'lastModifiedDate' => <DateTime>,
                    'reactionCounts' => [<integer>, ...],
                ],
                // ...
            ],
            'location' => [
                'filePath' => '<string>',
                'filePosition' => <integer>,
                'relativeFileVersion' => 'BEFORE|AFTER',
            ],
            'repositoryName' => '<string>',
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

RepositoryDoesNotExistException:

The specified repository does not exist.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

CommitIdRequiredException:

A commit ID was not specified.

InvalidCommitIdException:

The specified commit ID is not valid.

CommitDoesNotExistException:

The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

InvalidMaxResultsException:

The specified number of maximum results is not valid.

InvalidContinuationTokenException:

The specified continuation token is not valid.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetCommentsForPullRequest

$result = $client->getCommentsForPullRequest([/* ... */]);
$promise = $client->getCommentsForPullRequestAsync([/* ... */]);

Returns comments made on a pull request.

Parameter Syntax

$result = $client->getCommentsForPullRequest([
    'afterCommitId' => '<string>',
    'beforeCommitId' => '<string>',
    'maxResults' => <integer>,
    'nextToken' => '<string>',
    'pullRequestId' => '<string>', // REQUIRED
    'repositoryName' => '<string>',
]);

Parameter Details

Result Syntax

[
    'commentsForPullRequestData' => [
        [
            'afterBlobId' => '<string>',
            'afterCommitId' => '<string>',
            'beforeBlobId' => '<string>',
            'beforeCommitId' => '<string>',
            'comments' => [
                [
                    'authorArn' => '<string>',
                    'callerReactions' => ['<string>', ...],
                    'clientRequestToken' => '<string>',
                    'commentId' => '<string>',
                    'content' => '<string>',
                    'creationDate' => <DateTime>,
                    'deleted' => true || false,
                    'inReplyTo' => '<string>',
                    'lastModifiedDate' => <DateTime>,
                    'reactionCounts' => [<integer>, ...],
                ],
                // ...
            ],
            'location' => [
                'filePath' => '<string>',
                'filePosition' => <integer>,
                'relativeFileVersion' => 'BEFORE|AFTER',
            ],
            'pullRequestId' => '<string>',
            'repositoryName' => '<string>',
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

PullRequestIdRequiredException:

A pull request ID is required, but none was provided.

PullRequestDoesNotExistException:

The pull request ID could not be found. Make sure that you have specified the correct repository name and pull request ID, and then try again.

InvalidPullRequestIdException:

The pull request ID is not valid. Make sure that you have provided the full ID and that the pull request is in the specified repository, and then try again.

RepositoryNameRequiredException:

A repository name is required, but was not specified.

RepositoryDoesNotExistException:

The specified repository does not exist.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

CommitIdRequiredException:

A commit ID was not specified.

InvalidCommitIdException:

The specified commit ID is not valid.

CommitDoesNotExistException:

The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

InvalidMaxResultsException:

The specified number of maximum results is not valid.

InvalidContinuationTokenException:

The specified continuation token is not valid.

RepositoryNotAssociatedWithPullRequestException:

The repository does not contain any pull requests with that pull request ID. Use GetPullRequest to verify the correct repository name for the pull request ID.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetCommit

$result = $client->getCommit([/* ... */]);
$promise = $client->getCommitAsync([/* ... */]);

Returns information about a commit, including commit message and committer information.

Parameter Syntax

$result = $client->getCommit([
    'commitId' => '<string>', // REQUIRED
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'commit' => [
        'additionalData' => '<string>',
        'author' => [
            'date' => '<string>',
            'email' => '<string>',
            'name' => '<string>',
        ],
        'commitId' => '<string>',
        'committer' => [
            'date' => '<string>',
            'email' => '<string>',
            'name' => '<string>',
        ],
        'message' => '<string>',
        'parents' => ['<string>', ...],
        'treeId' => '<string>',
    ],
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

CommitIdRequiredException:

A commit ID was not specified.

InvalidCommitIdException:

The specified commit ID is not valid.

CommitIdDoesNotExistException:

The specified commit ID does not exist.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetDifferences

$result = $client->getDifferences([/* ... */]);
$promise = $client->getDifferencesAsync([/* ... */]);

Returns information about the differences in a valid commit specifier (such as a branch, tag, HEAD, commit ID, or other fully qualified reference). Results can be limited to a specified path.

Parameter Syntax

$result = $client->getDifferences([
    'MaxResults' => <integer>,
    'NextToken' => '<string>',
    'afterCommitSpecifier' => '<string>', // REQUIRED
    'afterPath' => '<string>',
    'beforeCommitSpecifier' => '<string>',
    'beforePath' => '<string>',
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'NextToken' => '<string>',
    'differences' => [
        [
            'afterBlob' => [
                'blobId' => '<string>',
                'mode' => '<string>',
                'path' => '<string>',
            ],
            'beforeBlob' => [
                'blobId' => '<string>',
                'mode' => '<string>',
                'path' => '<string>',
            ],
            'changeType' => 'A|M|D',
        ],
        // ...
    ],
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

RepositoryDoesNotExistException:

The specified repository does not exist.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

InvalidContinuationTokenException:

The specified continuation token is not valid.

InvalidMaxResultsException:

The specified number of maximum results is not valid.

InvalidCommitIdException:

The specified commit ID is not valid.

CommitRequiredException:

A commit was not specified.

InvalidCommitException:

The specified commit is not valid.

CommitDoesNotExistException:

The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

InvalidPathException:

The specified path is not valid.

PathDoesNotExistException:

The specified path does not exist.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetFile

$result = $client->getFile([/* ... */]);
$promise = $client->getFileAsync([/* ... */]);

Returns the base-64 encoded contents of a specified file and its metadata.

Parameter Syntax

$result = $client->getFile([
    'commitSpecifier' => '<string>',
    'filePath' => '<string>', // REQUIRED
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'blobId' => '<string>',
    'commitId' => '<string>',
    'fileContent' => <string || resource || Psr\Http\Message\StreamInterface>,
    'fileMode' => 'EXECUTABLE|NORMAL|SYMLINK',
    'filePath' => '<string>',
    'fileSize' => <integer>,
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

InvalidCommitException:

The specified commit is not valid.

CommitDoesNotExistException:

The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

PathRequiredException:

The folderPath for a location cannot be null.

InvalidPathException:

The specified path is not valid.

FileDoesNotExistException:

The specified file does not exist. Verify that you have used the correct file name, full path, and extension.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

FileTooLargeException:

The specified file exceeds the file size limit for CodeCommit. For more information about limits in CodeCommit, see Quotas in the CodeCommit User Guide.

GetFolder

$result = $client->getFolder([/* ... */]);
$promise = $client->getFolderAsync([/* ... */]);

Returns the contents of a specified folder in a repository.

Parameter Syntax

$result = $client->getFolder([
    'commitSpecifier' => '<string>',
    'folderPath' => '<string>', // REQUIRED
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'commitId' => '<string>',
    'files' => [
        [
            'absolutePath' => '<string>',
            'blobId' => '<string>',
            'fileMode' => 'EXECUTABLE|NORMAL|SYMLINK',
            'relativePath' => '<string>',
        ],
        // ...
    ],
    'folderPath' => '<string>',
    'subFolders' => [
        [
            'absolutePath' => '<string>',
            'relativePath' => '<string>',
            'treeId' => '<string>',
        ],
        // ...
    ],
    'subModules' => [
        [
            'absolutePath' => '<string>',
            'commitId' => '<string>',
            'relativePath' => '<string>',
        ],
        // ...
    ],
    'symbolicLinks' => [
        [
            'absolutePath' => '<string>',
            'blobId' => '<string>',
            'fileMode' => 'EXECUTABLE|NORMAL|SYMLINK',
            'relativePath' => '<string>',
        ],
        // ...
    ],
    'treeId' => '<string>',
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

InvalidCommitException:

The specified commit is not valid.

CommitDoesNotExistException:

The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

PathRequiredException:

The folderPath for a location cannot be null.

InvalidPathException:

The specified path is not valid.

FolderDoesNotExistException:

The specified folder does not exist. Either the folder name is not correct, or you did not enter the full path to the folder.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetMergeCommit

$result = $client->getMergeCommit([/* ... */]);
$promise = $client->getMergeCommitAsync([/* ... */]);

Returns information about a specified merge commit.

Parameter Syntax

$result = $client->getMergeCommit([
    'conflictDetailLevel' => 'FILE_LEVEL|LINE_LEVEL',
    'conflictResolutionStrategy' => 'NONE|ACCEPT_SOURCE|ACCEPT_DESTINATION|AUTOMERGE',
    'destinationCommitSpecifier' => '<string>', // REQUIRED
    'repositoryName' => '<string>', // REQUIRED
    'sourceCommitSpecifier' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'baseCommitId' => '<string>',
    'destinationCommitId' => '<string>',
    'mergedCommitId' => '<string>',
    'sourceCommitId' => '<string>',
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

CommitRequiredException:

A commit was not specified.

InvalidCommitException:

The specified commit is not valid.

CommitDoesNotExistException:

The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

InvalidConflictDetailLevelException:

The specified conflict detail level is not valid.

InvalidConflictResolutionStrategyException:

The specified conflict resolution strategy is not valid.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetMergeConflicts

$result = $client->getMergeConflicts([/* ... */]);
$promise = $client->getMergeConflictsAsync([/* ... */]);

Returns information about merge conflicts between the before and after commit IDs for a pull request in a repository.

Parameter Syntax

$result = $client->getMergeConflicts([
    'conflictDetailLevel' => 'FILE_LEVEL|LINE_LEVEL',
    'conflictResolutionStrategy' => 'NONE|ACCEPT_SOURCE|ACCEPT_DESTINATION|AUTOMERGE',
    'destinationCommitSpecifier' => '<string>', // REQUIRED
    'maxConflictFiles' => <integer>,
    'mergeOption' => 'FAST_FORWARD_MERGE|SQUASH_MERGE|THREE_WAY_MERGE', // REQUIRED
    'nextToken' => '<string>',
    'repositoryName' => '<string>', // REQUIRED
    'sourceCommitSpecifier' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'baseCommitId' => '<string>',
    'conflictMetadataList' => [
        [
            'contentConflict' => true || false,
            'fileModeConflict' => true || false,
            'fileModes' => [
                'base' => 'EXECUTABLE|NORMAL|SYMLINK',
                'destination' => 'EXECUTABLE|NORMAL|SYMLINK',
                'source' => 'EXECUTABLE|NORMAL|SYMLINK',
            ],
            'filePath' => '<string>',
            'fileSizes' => [
                'base' => <integer>,
                'destination' => <integer>,
                'source' => <integer>,
            ],
            'isBinaryFile' => [
                'base' => true || false,
                'destination' => true || false,
                'source' => true || false,
            ],
            'mergeOperations' => [
                'destination' => 'A|M|D',
                'source' => 'A|M|D',
            ],
            'numberOfConflicts' => <integer>,
            'objectTypeConflict' => true || false,
            'objectTypes' => [
                'base' => 'FILE|DIRECTORY|GIT_LINK|SYMBOLIC_LINK',
                'destination' => 'FILE|DIRECTORY|GIT_LINK|SYMBOLIC_LINK',
                'source' => 'FILE|DIRECTORY|GIT_LINK|SYMBOLIC_LINK',
            ],
        ],
        // ...
    ],
    'destinationCommitId' => '<string>',
    'mergeable' => true || false,
    'nextToken' => '<string>',
    'sourceCommitId' => '<string>',
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

MergeOptionRequiredException:

A merge option or stategy is required, and none was provided.

InvalidMergeOptionException:

The specified merge option is not valid for this operation. Not all merge strategies are supported for all operations.

InvalidContinuationTokenException:

The specified continuation token is not valid.

CommitRequiredException:

A commit was not specified.

CommitDoesNotExistException:

The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

InvalidCommitException:

The specified commit is not valid.

TipsDivergenceExceededException:

The divergence between the tips of the provided commit specifiers is too great to determine whether there might be any merge conflicts. Locally compare the specifiers using git diff or a diff tool.

InvalidMaxConflictFilesException:

The specified value for the number of conflict files to return is not valid.

InvalidConflictDetailLevelException:

The specified conflict detail level is not valid.

InvalidDestinationCommitSpecifierException:

The destination commit specifier is not valid. You must provide a valid branch name, tag, or full commit ID.

InvalidSourceCommitSpecifierException:

The source commit specifier is not valid. You must provide a valid branch name, tag, or full commit ID.

InvalidConflictResolutionStrategyException:

The specified conflict resolution strategy is not valid.

MaximumFileContentToLoadExceededException:

The number of files to load exceeds the allowed limit.

MaximumItemsToCompareExceededException:

The number of items to compare between the source or destination branches and the merge base has exceeded the maximum allowed.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetMergeOptions

$result = $client->getMergeOptions([/* ... */]);
$promise = $client->getMergeOptionsAsync([/* ... */]);

Returns information about the merge options available for merging two specified branches. For details about why a merge option is not available, use GetMergeConflicts or DescribeMergeConflicts.

Parameter Syntax

$result = $client->getMergeOptions([
    'conflictDetailLevel' => 'FILE_LEVEL|LINE_LEVEL',
    'conflictResolutionStrategy' => 'NONE|ACCEPT_SOURCE|ACCEPT_DESTINATION|AUTOMERGE',
    'destinationCommitSpecifier' => '<string>', // REQUIRED
    'repositoryName' => '<string>', // REQUIRED
    'sourceCommitSpecifier' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'baseCommitId' => '<string>',
    'destinationCommitId' => '<string>',
    'mergeOptions' => ['<string>', ...],
    'sourceCommitId' => '<string>',
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

CommitRequiredException:

A commit was not specified.

CommitDoesNotExistException:

The specified commit does not exist or no commit was specified, and the specified repository has no default branch.

InvalidCommitException:

The specified commit is not valid.

TipsDivergenceExceededException:

The divergence between the tips of the provided commit specifiers is too great to determine whether there might be any merge conflicts. Locally compare the specifiers using git diff or a diff tool.

InvalidConflictDetailLevelException:

The specified conflict detail level is not valid.

InvalidConflictResolutionStrategyException:

The specified conflict resolution strategy is not valid.

MaximumFileContentToLoadExceededException:

The number of files to load exceeds the allowed limit.

MaximumItemsToCompareExceededException:

The number of items to compare between the source or destination branches and the merge base has exceeded the maximum allowed.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetPullRequest

$result = $client->getPullRequest([/* ... */]);
$promise = $client->getPullRequestAsync([/* ... */]);

Gets information about a pull request in a specified repository.

Parameter Syntax

$result = $client->getPullRequest([
    'pullRequestId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'pullRequest' => [
        'approvalRules' => [
            [
                'approvalRuleContent' => '<string>',
                'approvalRuleId' => '<string>',
                'approvalRuleName' => '<string>',
                'creationDate' => <DateTime>,
                'lastModifiedDate' => <DateTime>,
                'lastModifiedUser' => '<string>',
                'originApprovalRuleTemplate' => [
                    'approvalRuleTemplateId' => '<string>',
                    'approvalRuleTemplateName' => '<string>',
                ],
                'ruleContentSha256' => '<string>',
            ],
            // ...
        ],
        'authorArn' => '<string>',
        'clientRequestToken' => '<string>',
        'creationDate' => <DateTime>,
        'description' => '<string>',
        'lastActivityDate' => <DateTime>,
        'pullRequestId' => '<string>',
        'pullRequestStatus' => 'OPEN|CLOSED',
        'pullRequestTargets' => [
            [
                'destinationCommit' => '<string>',
                'destinationReference' => '<string>',
                'mergeBase' => '<string>',
                'mergeMetadata' => [
                    'isMerged' => true || false,
                    'mergeCommitId' => '<string>',
                    'mergeOption' => 'FAST_FORWARD_MERGE|SQUASH_MERGE|THREE_WAY_MERGE',
                    'mergedBy' => '<string>',
                ],
                'repositoryName' => '<string>',
                'sourceCommit' => '<string>',
                'sourceReference' => '<string>',
            ],
            // ...
        ],
        'revisionId' => '<string>',
        'title' => '<string>',
    ],
]

Result Details

Errors

PullRequestDoesNotExistException:

The pull request ID could not be found. Make sure that you have specified the correct repository name and pull request ID, and then try again.

InvalidPullRequestIdException:

The pull request ID is not valid. Make sure that you have provided the full ID and that the pull request is in the specified repository, and then try again.

PullRequestIdRequiredException:

A pull request ID is required, but none was provided.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetPullRequestApprovalStates

$result = $client->getPullRequestApprovalStates([/* ... */]);
$promise = $client->getPullRequestApprovalStatesAsync([/* ... */]);

Gets information about the approval states for a specified pull request. Approval states only apply to pull requests that have one or more approval rules applied to them.

Parameter Syntax

$result = $client->getPullRequestApprovalStates([
    'pullRequestId' => '<string>', // REQUIRED
    'revisionId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'approvals' => [
        [
            'approvalState' => 'APPROVE|REVOKE',
            'userArn' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

PullRequestDoesNotExistException:

The pull request ID could not be found. Make sure that you have specified the correct repository name and pull request ID, and then try again.

InvalidPullRequestIdException:

The pull request ID is not valid. Make sure that you have provided the full ID and that the pull request is in the specified repository, and then try again.

PullRequestIdRequiredException:

A pull request ID is required, but none was provided.

InvalidRevisionIdException:

The revision ID is not valid. Use GetPullRequest to determine the value.

RevisionIdRequiredException:

A revision ID is required, but was not provided.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetPullRequestOverrideState

$result = $client->getPullRequestOverrideState([/* ... */]);
$promise = $client->getPullRequestOverrideStateAsync([/* ... */]);

Returns information about whether approval rules have been set aside (overridden) for a pull request, and if so, the Amazon Resource Name (ARN) of the user or identity that overrode the rules and their requirements for the pull request.

Parameter Syntax

$result = $client->getPullRequestOverrideState([
    'pullRequestId' => '<string>', // REQUIRED
    'revisionId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'overridden' => true || false,
    'overrider' => '<string>',
]

Result Details

Errors

PullRequestDoesNotExistException:

The pull request ID could not be found. Make sure that you have specified the correct repository name and pull request ID, and then try again.

InvalidPullRequestIdException:

The pull request ID is not valid. Make sure that you have provided the full ID and that the pull request is in the specified repository, and then try again.

PullRequestIdRequiredException:

A pull request ID is required, but none was provided.

InvalidRevisionIdException:

The revision ID is not valid. Use GetPullRequest to determine the value.

RevisionIdRequiredException:

A revision ID is required, but was not provided.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetRepository

$result = $client->getRepository([/* ... */]);
$promise = $client->getRepositoryAsync([/* ... */]);

Returns information about a repository.

Parameter Syntax

$result = $client->getRepository([
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'repositoryMetadata' => [
        'Arn' => '<string>',
        'accountId' => '<string>',
        'cloneUrlHttp' => '<string>',
        'cloneUrlSsh' => '<string>',
        'creationDate' => <DateTime>,
        'defaultBranch' => '<string>',
        'kmsKeyId' => '<string>',
        'lastModifiedDate' => <DateTime>,
        'repositoryDescription' => '<string>',
        'repositoryId' => '<string>',
        'repositoryName' => '<string>',
    ],
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

RepositoryDoesNotExistException:

The specified repository does not exist.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

GetRepositoryTriggers

$result = $client->getRepositoryTriggers([/* ... */]);
$promise = $client->getRepositoryTriggersAsync([/* ... */]);

Gets information about triggers configured for a repository.

Parameter Syntax

$result = $client->getRepositoryTriggers([
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'configurationId' => '<string>',
    'triggers' => [
        [
            'branches' => ['<string>', ...],
            'customData' => '<string>',
            'destinationArn' => '<string>',
            'events' => ['<string>', ...],
            'name' => '<string>',
        ],
        // ...
    ],
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

ListApprovalRuleTemplates

$result = $client->listApprovalRuleTemplates([/* ... */]);
$promise = $client->listApprovalRuleTemplatesAsync([/* ... */]);

Lists all approval rule templates in the specified Amazon Web Services Region in your Amazon Web Services account. If an Amazon Web Services Region is not specified, the Amazon Web Services Region where you are signed in is used.

Parameter Syntax

$result = $client->listApprovalRuleTemplates([
    'maxResults' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'approvalRuleTemplateNames' => ['<string>', ...],
    'nextToken' => '<string>',
]

Result Details

Errors

InvalidMaxResultsException:

The specified number of maximum results is not valid.

InvalidContinuationTokenException:

The specified continuation token is not valid.

ListAssociatedApprovalRuleTemplatesForRepository

$result = $client->listAssociatedApprovalRuleTemplatesForRepository([/* ... */]);
$promise = $client->listAssociatedApprovalRuleTemplatesForRepositoryAsync([/* ... */]);

Lists all approval rule templates that are associated with a specified repository.

Parameter Syntax

$result = $client->listAssociatedApprovalRuleTemplatesForRepository([
    'maxResults' => <integer>,
    'nextToken' => '<string>',
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'approvalRuleTemplateNames' => ['<string>', ...],
    'nextToken' => '<string>',
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

RepositoryDoesNotExistException:

The specified repository does not exist.

InvalidMaxResultsException:

The specified number of maximum results is not valid.

InvalidContinuationTokenException:

The specified continuation token is not valid.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

ListBranches

$result = $client->listBranches([/* ... */]);
$promise = $client->listBranchesAsync([/* ... */]);

Gets information about one or more branches in a repository.

Parameter Syntax

$result = $client->listBranches([
    'nextToken' => '<string>',
    'repositoryName' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'branches' => ['<string>', ...],
    'nextToken' => '<string>',
]

Result Details

Errors

RepositoryNameRequiredException:

A repository name is required, but was not specified.

RepositoryDoesNotExistException:

The specified repository does not exist.

InvalidRepositoryNameException:

A specified repository name is not valid.

This exception occurs only when a specified repository name is not valid. Other exceptions occur when a required repository parameter is missing, or when a specified repository does not exist.

EncryptionIntegrityChecksFailedException:

An encryption integrity check failed.

EncryptionKeyAccessDeniedException:

An encryption key could not be accessed.

EncryptionKeyDisabledException:

The encryption key is disabled.

EncryptionKeyNotFoundException:

No encryption key was found.

EncryptionKeyUnavailableException:

The encryption key is not available.

InvalidContinuationTokenException:

The specified continuation token is not valid.

ListFileCommitHistory