AssociateCollector

$result = $client->associateCollector([/* ... */]);
$promise = $client->associateCollectorAsync([/* ... */]);

Associates one Collector with this Environment and configures the customer role Continuum uses to authorize access to associated Collector data. The caller must have permission on the Environment and permission to pass the role. Continuum assumes the supplied role and calls GetCollectorDataAccessAuthorization on the requested Collector; only a successful authorization response permits the association. The caller does not need Collector data-access permission. The Environment retains its other Collector associations. Calling again with an existing association is safe and does not create a duplicate.

Parameter Syntax

$result = $client->associateCollector([
    'clientToken' => '<string>',
    'collectorArn' => '<string>', // REQUIRED
    'collectorDataAccessRoleArn' => '<string>', // REQUIRED
    'environmentId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'associatedCollector' => [
        'collectorArn' => '<string>',
        'collectorId' => '<string>',
    ],
    'environmentArn' => '<string>',
    'environmentId' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

CreateCodeFinding

$result = $client->createCodeFinding([/* ... */]);
$promise = $client->createCodeFindingAsync([/* ... */]);

Ingests a customer-supplied security finding into an environment. Continuum validates the document synchronously against the required overlay fields for the declared format; invalid documents are rejected with a ValidationException. The maximum accepted document size is 256 KB. The environment must have a source configured, and the finding must identify a code location so Continuum can tie it to a repository in the environment's build. Continuum assigns a findingId and stores the verbatim document. When no successful build yet contains the finding's repository, the finding stays SUBMITTED until the next successful build; if that build does not contain it either, the finding is DISCARDED with discardReason SOURCE_REPO_NOT_FOUND.

Parameter Syntax

$result = $client->createCodeFinding([
    'clientToken' => '<string>',
    'environmentId' => '<string>', // REQUIRED
    'ocsfDocument' => [ // REQUIRED
    ],
]);

Parameter Details

Result Syntax

[
    'createdAt' => <DateTime>,
    'findingArn' => '<string>',
    'findingId' => '<string>',
    'status' => 'SUBMITTED|VALIDATING|CONFIRMED|DISCARDED',
    'title' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

CreateCodeScan

$result = $client->createCodeScan([/* ... */]);
$promise = $client->createCodeScanAsync([/* ... */]);

Creates an explicit scan request for one environment. CP creates durable work before any queue delivery occurs.

Retrying a request that succeeded, with the same clientToken on the same environment, returns the original scan instead of starting another one. Token handling is not yet atomic: requests with the same token that run at the same time, or a retry after a request that failed partway through, can leave an additional scan, which may end in the FAILED state with a message that it was superseded. Deleting the environment makes its tokens unusable; a later request with one of them returns ResourceNotFoundException.

Each environment can have a limited number of scans in progress at the same time. Once that limit is enforced, a request that would exceed it returns ServiceQuotaExceededException; wait for a scan to finish (ListCodeScans shows each scan's status), then retry.

Parameter Syntax

$result = $client->createCodeScan([
    'clientToken' => '<string>',
    'environmentId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'scan' => [
        'completedAt' => <DateTime>,
        'createdAt' => <DateTime>,
        'failureMessage' => '<string>',
        'failureStage' => 'SUBMITTED|WAITING_FOR_BUILD|BUILDING|WAITING_FOR_SCAN|SCANNING',
        'origin' => 'MANUAL|SCHEDULED',
        'scanRunId' => '<string>',
        'status' => 'SUBMITTED|WAITING_FOR_BUILD|BUILDING|WAITING_FOR_SCAN|SCANNING|SUCCEEDED|FAILED',
    ],
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

ServiceQuotaExceededException:

The request would exceed a service quota. Review your quota and request an increase if needed.

CreateCollector

$result = $client->createCollector([/* ... */]);
$promise = $client->createCollectorAsync([/* ... */]);

Creates the Collector for the caller's account. Provisions an AWS Config service-linked recorder using the caller's federated access session and begins recording infrastructure changes.

Parameter Syntax

$result = $client->createCollector([
    'clientToken' => '<string>',
    'kubernetesClusterRole' => [
        'externalId' => '<string>',
        'roleArn' => '<string>', // REQUIRED
    ],
    'type' => 'AWS_COLLECTOR',
]);

Parameter Details

Result Syntax

[
    'collectorArn' => '<string>',
    'collectorId' => '<string>',
    'createdAt' => <DateTime>,
    'status' => 'ACTIVE|PENDING_DELETION',
    'type' => 'AWS_COLLECTOR',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

ServiceQuotaExceededException:

The request would exceed a service quota. Review your quota and request an increase if needed.

CreateEnvironment

$result = $client->createEnvironment([/* ... */]);
$promise = $client->createEnvironmentAsync([/* ... */]);

Creates an environment and starts its validation and any requested provisioning. Storage provisioning and dependency checks may continue after the initial 201 response; use GetEnvironment to observe completion.

Parameter Syntax

$result = $client->createEnvironment([
    'configuration' => [
        'codeConfiguration' => [
            'environmentConfiguration' => [
                'network' => [
                    'allowedDomains' => ['<string>', ...],
                ],
                'patchCreationPolicy' => 'ENABLED|DISABLED',
                'scanFrequency' => '<string>',
            ],
            'sourceConfiguration' => [
                'repositorySources' => [
                    [
                        'defaultBranch' => '<string>',
                        'integrationId' => '<string>', // REQUIRED
                        'repository' => '<string>', // REQUIRED
                    ],
                    // ...
                ],
                's3Sources' => [
                    [
                        'codePrefix' => '<string>',
                        'contextPrefix' => '<string>',
                        'integrationId' => '<string>', // REQUIRED
                    ],
                    // ...
                ],
            ],
        ],
    ],
    'name' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'createdAt' => <DateTime>,
    'environmentArn' => '<string>',
    'environmentId' => '<string>',
    'status' => 'ACTIVE',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

ServiceQuotaExceededException:

The request would exceed a service quota. Review your quota and request an increase if needed.

CreateIntegration

$result = $client->createIntegration([/* ... */]);
$promise = $client->createIntegrationAsync([/* ... */]);

Creates a new integration with an external source provider. Repeating an identical request with the same clientToken returns the original integrationId, integrationArn, and createdAt. Token records are retained for eight hours after success or terminal failure, including after the integration is deleted; replaying a deleted integration's token does not recreate it. An identical request with a retained terminal failure returns the recorded error.

Reusing a token with different parameters returns ValidationException. A fresh token starts a new create attempt; if the name is already owned by another integration, ConflictException includes that integration's identifier. An attempt still in progress may return ThrottlingException with retryAfterSeconds set to 1; retry with the same token and identical parameters.

GitHub authorization codes are single use. Retry an unresolved attempt with its original token and unchanged parameters first. If the service reports a terminal failure, an expired attempt, or a successful token exchange whose integration could not be saved, restart GitHub authorization with a fresh token and authorization code. The service does not checkpoint provider results for recovery by another request.

Parameter Syntax

$result = $client->createIntegration([
    'clientToken' => '<string>',
    'name' => '<string>', // REQUIRED
    'providerConfiguration' => [ // REQUIRED
        'github' => [
            'authorization' => [ // REQUIRED
                'authorizationCode' => '<string>', // REQUIRED
                'redirectUrl' => '<string>',
                'state' => '<string>', // REQUIRED
            ],
            'organizationName' => '<string>',
        ],
        'gitlab' => [
            'accessToken' => '<string>', // REQUIRED
            'instanceUrl' => '<string>', // REQUIRED
            'targetPath' => '<string>', // REQUIRED
            'targetType' => 'GROUP|PROJECT', // REQUIRED
        ],
        's3' => [
            'bucket' => '<string>', // REQUIRED
            'externalId' => '<string>', // REQUIRED
            'roleArn' => '<string>', // REQUIRED
        ],
    ],
]);

Parameter Details

Result Syntax

[
    'createdAt' => <DateTime>,
    'integrationArn' => '<string>',
    'integrationId' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

ServiceQuotaExceededException:

The request would exceed a service quota. Review your quota and request an increase if needed.

DeleteCollector

$result = $client->deleteCollector([/* ... */]);
$promise = $client->deleteCollectorAsync([/* ... */]);

Deletes the Collector for the caller's account. The Collector first enters PENDING_DELETION, then the service removes its schedule, AWS Config service-linked recorder, versioned S3 bucket, KMS key, and persisted record.

Parameter Syntax

$result = $client->deleteCollector([
    'collectorId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

DeleteEnvironment

$result = $client->deleteEnvironment([/* ... */]);
$promise = $client->deleteEnvironmentAsync([/* ... */]);

Deletes an environment and its associated resources.

Parameter Syntax

$result = $client->deleteEnvironment([
    'environmentId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

DeleteIntegration

$result = $client->deleteIntegration([/* ... */]);
$promise = $client->deleteIntegrationAsync([/* ... */]);

Deletes an integration and releases its name and account quota. Its retained CreateIntegration token receipt can still replay the original result without recreating the integration. Shared provider registrations are retained: deleting one integration does not remove provider access used by another integration. A fresh GitHub CreateIntegration attempt requires a fresh OAuth authorization code and a new clientToken.

Parameter Syntax

$result = $client->deleteIntegration([
    'integrationId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

DisassociateCollector

$result = $client->disassociateCollector([/* ... */]);
$promise = $client->disassociateCollectorAsync([/* ... */]);

Removes one Collector association from this Environment, preserving its other associations. The stored Collector data-access role is cleared when no Collector associations remain. The Environment owner must have permission to disassociate. A current Collector access grant is not required, and the Collector does not need to remain active or present, so stale or revoked associations can be cleaned up.

Parameter Syntax

$result = $client->disassociateCollector([
    'collectorArn' => '<string>', // REQUIRED
    'environmentId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

GetCodeFinding

$result = $client->getCodeFinding([/* ... */]);
$promise = $client->getCodeFindingAsync([/* ... */]);

Retrieves the current state and details of a finding.

Parameter Syntax

$result = $client->getCodeFinding([
    'environmentId' => '<string>', // REQUIRED
    'findingId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'affectedPackages' => [
        [
            'fixedInVersion' => '<string>',
            'name' => '<string>',
            'packageManager' => '<string>',
            'version' => '<string>',
        ],
        // ...
    ],
    'category' => '<string>',
    'completedAt' => <DateTime>,
    'createdAt' => <DateTime>,
    'createdIssueId' => '<string>',
    'cveId' => '<string>',
    'cvssBaseScore' => <float>,
    'cweIds' => ['<string>', ...],
    'detailedDescription' => '<string>',
    'discardReason' => 'SCANNER_VALIDATED_FALSE_POSITIVE|SCANNER_NEEDS_REVIEW|FALSE_POSITIVE_VALIDATED_AGAINST_CONTEXT|DUPLICATE_OF_OPEN_ISSUE|DUPLICATE_OF_CLOSED_ISSUE|COMPENSATING_CONTROL_PRESENT|OUT_OF_SCOPE|INSUFFICIENT_EVIDENCE|PROCESSING_FAILED|SOURCE_REPO_NOT_FOUND',
    'discardReasoning' => '<string>',
    'duplicateOfIssueId' => '<string>',
    'endLine' => <integer>,
    'environmentId' => '<string>',
    'filePath' => '<string>',
    'findingArn' => '<string>',
    'findingId' => '<string>',
    'findingTypes' => ['<string>', ...],
    'firstSeenAt' => <DateTime>,
    'lineNumber' => <integer>,
    'mitigation' => '<string>',
    'mitreTechniques' => ['<string>', ...],
    'ocsfClass' => 'VULNERABILITY_FINDING|APPLICATION_SECURITY_POSTURE_FINDING',
    'ocsfSchemaVersion' => '<string>',
    'owaspCategory' => '<string>',
    'posture' => [
        'application' => '<string>',
        'applicationUid' => '<string>',
        'applicationVersion' => '<string>',
        'checks' => [
            [
                'description' => '<string>',
                'name' => '<string>',
                'uid' => '<string>',
            ],
            // ...
        ],
        'control' => '<string>',
        'description' => '<string>',
        'remediation' => '<string>',
        'remediationReferences' => ['<string>', ...],
        'requirements' => ['<string>', ...],
        'standards' => ['<string>', ...],
        'status' => '<string>',
        'statusId' => <integer>,
    ],
    'productName' => '<string>',
    'productVendorName' => '<string>',
    'productVersion' => '<string>',
    'relevantInputs' => ['<string>', ...],
    'remediationReferences' => ['<string>', ...],
    'reportedAt' => <DateTime>,
    'resources' => [
        [
            'name' => '<string>',
            'region' => '<string>',
            'type' => '<string>',
            'uid' => '<string>',
        ],
        // ...
    ],
    'scanRunId' => '<string>',
    'severity' => 'UNKNOWN|INFORMATIONAL|LOW|MEDIUM|HIGH|CRITICAL|FATAL|OTHER',
    'source' => '<string>',
    'sourceFindingId' => '<string>',
    'sourceStatus' => '<string>',
    'sourceStatusId' => <integer>,
    'status' => 'SUBMITTED|VALIDATING|CONFIRMED|DISCARDED',
    'statusMessage' => '<string>',
    'statusUpdatedAt' => <DateTime>,
    'stepsToReproduce' => ['<string>', ...],
    'subCategory' => '<string>',
    'summary' => '<string>',
    'title' => '<string>',
    'type' => 'CONTINUUM_CODE_VULN|CUSTOMER_CODE_VULN',
    'validation' => [
        'blockingReason' => 'UNREACHABLE|PROTECTED|MISCLASSIFIED|EXCLUDED|NOT_FEASIBLE|RISK_MITIGATED|NONE',
        'confidence' => <float>,
        'evidence' => [
            [
                'file' => '<string>',
                'line' => <integer>,
                'snippet' => '<string>',
            ],
            // ...
        ],
        'mitigatingControls' => ['<string>', ...],
        'preconditions' => ['<string>', ...],
        'rationale' => '<string>',
        'severityAdjustment' => 'CRITICAL|HIGH|MEDIUM|LOW|INFORMATIONAL|UNCHANGED',
        'verdict' => 'TRUE_POSITIVE|FALSE_POSITIVE|BENIGN_TRUE_POSITIVE|NEEDS_REVIEW',
    ],
    'vulnerabilities' => [
        [
            'additionalCweIds' => ['<string>', ...],
            'affectedPackages' => [
                [
                    'fixedInVersion' => '<string>',
                    'name' => '<string>',
                    'packageManager' => '<string>',
                    'version' => '<string>',
                ],
                // ...
            ],
            'code' => '<string>',
            'cveId' => '<string>',
            'cvssBaseScore' => <float>,
            'cweCaption' => '<string>',
            'cweId' => '<string>',
            'description' => '<string>',
            'details' => '<string>',
            'fixCoverage' => '<string>',
            'fixCoverageId' => <integer>,
            'locations' => [
                [
                    'endLine' => <integer>,
                    'filePath' => '<string>',
                    'startLine' => <integer>,
                ],
                // ...
            ],
            'remediation' => '<string>',
            'remediationReferences' => ['<string>', ...],
            'title' => '<string>',
        ],
        // ...
    ],
    'vulnerableCode' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

GetCodeIssue

$result = $client->getCodeIssue([/* ... */]);
$promise = $client->getCodeIssueAsync([/* ... */]);

Retrieves the current state and details of an issue.

Parameter Syntax

$result = $client->getCodeIssue([
    'environmentId' => '<string>', // REQUIRED
    'issueId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'confidence' => <integer>,
    'createdAt' => <DateTime>,
    'evidenceAvailability' => 'NONE|AVAILABLE',
    'findingIds' => ['<string>', ...],
    'issueArn' => '<string>',
    'issueId' => '<string>',
    'name' => '<string>',
    'patchDelivery' => [
        'failedCount' => <integer>,
        'failureReasons' => ['<string>', ...],
        'patchCount' => <integer>,
        'status' => 'PENDING|SUCCEEDED|FAILED|SKIPPED',
        'succeededCount' => <integer>,
    ],
    'phase' => 'VALIDATION|PRIORITIZATION|REMEDIATION',
    'severity' => 'LOW|MEDIUM|HIGH|CRITICAL',
    'severityReasoning' => '<string>',
    'status' => 'CREATED|IN_PROGRESS|COMPLETED|FAILED',
    'statusMessage' => '<string>',
    'statusReason' => 'INTERNAL_ERROR|REMEDIATION_FAILED',
    'statusUpdatedAt' => <DateTime>,
    'summary' => '<string>',
    'synopsis' => '<string>',
    'updatedAt' => <DateTime>,
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

GetCodeIssueArtifact

$result = $client->getCodeIssueArtifact([/* ... */]);
$promise = $client->getCodeIssueArtifactAsync([/* ... */]);

Retrieves one immutable artifact attached to an issue, including its content.

Parameter Syntax

$result = $client->getCodeIssueArtifact([
    'artifactId' => '<string>', // REQUIRED
    'environmentId' => '<string>', // REQUIRED
    'issueId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'artifactId' => '<string>',
    'artifactType' => 'EVIDENCE|AGENT_COMMUNICATION|VALIDATION_EVIDENCE|REMEDIATION_PROPOSAL|DECISION|PATCH',
    'body' => [
        'patch' => [
            'delivery' => [
                'status' => 'PENDING|SUCCEEDED|FAILED|SKIPPED|ABANDONED',
                'target' => [
                    'github' => [
                        'headSha' => '<string>',
                        'owner' => '<string>',
                        'pullRequestNumber' => <integer>,
                        'repository' => '<string>',
                    ],
                    's3' => [
                        'bucket' => '<string>',
                        'key' => '<string>',
                        'version' => '<string>',
                    ],
                ],
                'updatedAt' => <DateTime>,
            ],
            'format' => 'GIT_MAILBOX_PATCH|GIT_BINARY_DIFF|GIT_DIFF',
            'patch' => '<string>',
            'patchSha256' => '<string>',
            'repositoryName' => '<string>',
            'sizeBytes' => <integer>,
        ],
        'prevalidationSignals' => [
            'producedBy' => '<string>',
            'signals' => [
                [
                    'computed' => [
                        'barriers' => <integer>,
                        'impactBand' => 'VERY_LOW|LOW|MODERATE|HIGH',
                        'likelihoodBand' => 'VERY_LOW|LOW|MODERATE|HIGH',
                    ],
                    'conclusion' => '<string>',
                    'confidence' => <float>,
                    'confidenceReasoning' => [
                        'factors' => ['<string>', ...],
                        'summary' => '<string>',
                    ],
                    'dimension' => 'EXPLOITABILITY|BLAST_RADIUS|NETWORK_EXPOSURE|PRECONDITION|CODE_CONTEXT|LIKELIHOOD_ASSESSMENT|IMPACT_ASSESSMENT',
                    'exploitability' => [
                        'confidenceTier' => 'SOURCE_READ|STATIC_PROVEN|BUILD_PROVEN|RUNTIME_PROVEN',
                        'highestLayerReached' => <integer>,
                        'reachedCrownJewels' => true || false,
                        'scriptable' => true || false,
                        'sourceValidationArtifactId' => '<string>',
                        'verdict' => 'EXPLOITABLE|NOT_EXPLOITABLE|UNCERTAIN',
                    ],
                    'impactDimensions' => [
                        'attackerGains' => [
                            'basis' => 'CODE|GRAPH|FINDING|INFERRED|NO_EVIDENCE_DEFAULT',
                            'missingInfo' => '<string>',
                            'reason' => '<string>',
                            'value' => 'EXECUTE|MODIFY_PRIVILEGED|MODIFY_DATA|MODIFY_COSMETIC|READ|NEITHER',
                        ],
                        'blastRadius' => [
                            'basis' => 'CODE|GRAPH|FINDING|INFERRED|NO_EVIDENCE_DEFAULT',
                            'missingInfo' => '<string>',
                            'reason' => '<string>',
                            'value' => 'CROSS_TENANT|OTHER_USERS_IN_TENANT|OWN_SCOPE',
                        ],
                        'targetValue' => [
                            'basis' => 'CODE|GRAPH|FINDING|INFERRED|NO_EVIDENCE_DEFAULT',
                            'missingInfo' => '<string>',
                            'reason' => '<string>',
                            'value' => 'HIGH|MEDIUM|LOW',
                        ],
                    ],
                    'preconditions' => [
                        'accessLevel' => [
                            'basis' => 'CODE|GRAPH|FINDING|INFERRED|NO_EVIDENCE_DEFAULT',
                            'missingInfo' => '<string>',
                            'reason' => '<string>',
                            'value' => 'NONE|ANY_AUTHENTICATED|PRIVILEGED',
                        ],
                        'configurationNeeded' => [
                            'basis' => 'CODE|GRAPH|FINDING|INFERRED|NO_EVIDENCE_DEFAULT',
                            'missingInfo' => '<string>',
                            'reason' => '<string>',
                            'value' => true || false,
                        ],
                        'reachableFromAttacker' => [
                            'basis' => 'CODE|GRAPH|FINDING|INFERRED|NO_EVIDENCE_DEFAULT',
                            'missingInfo' => '<string>',
                            'reason' => '<string>',
                            'value' => true || false,
                        ],
                        'userInteractionRequired' => [
                            'basis' => 'CODE|GRAPH|FINDING|INFERRED|NO_EVIDENCE_DEFAULT',
                            'missingInfo' => '<string>',
                            'reason' => '<string>',
                            'value' => true || false,
                        ],
                    ],
                    'producerId' => '<string>',
                    'producerVersion' => '<string>',
                    'signalStrength' => 'NONE|WEAK|MODERATE|STRONG',
                    'subjectRef' => '<string>',
                ],
                // ...
            ],
        ],
        'raw' => '<string>',
        'remediationProposal' => [
            'filename' => '<string>',
            'format' => 'GIT_MAILBOX_PATCH|GIT_BINARY_DIFF|GIT_DIFF',
            'patch' => '<string>',
            'patchSha256' => '<string>',
        ],
        'validationEvidence' => [
            'attackFlowsConfirmed' => ['<string>', ...],
            'executedProof' => [
                'code' => [
                    'proofCode' => [
                        [
                            'content' => '<string>',
                        ],
                        // ...
                    ],
                ],
                'observedEffect' => 'DATA_LEAKED|ERROR_REVEALED|BEHAVIOR_CHANGED|NO_EFFECT',
                'output' => [
                    'consoleOutput' => '<string>',
                ],
            ],
            'exploitArtifact' => [
                'effect' => 'DATA_LEAKED|ERROR_REVEALED|BEHAVIOR_CHANGED|NO_EFFECT',
                'headers' => ['<string>', ...],
                'httpMethod' => 'GET|HEAD|POST|PUT|PATCH|DELETE|OPTIONS',
                'payload' => '<string>',
                'responseSnippet' => '<string>',
                'responseStatus' => <integer>,
                'targetUrl' => '<string>',
            ],
            'exploitable' => 'EXPLOITABLE|NOT_EXPLOITABLE|UNCERTAIN',
            'flowVerdicts' => [
                [
                    'confidence' => <float>,
                    'evidence' => ['<string>', ...],
                    'flowId' => '<string>',
                    'verdict' => 'CONFIRMED|DENIED|INCONCLUSIVE',
                ],
                // ...
            ],
            'perFindingResults' => [
                [
                    'confidence' => <float>,
                    'exploitArtifact' => [
                        'effect' => 'DATA_LEAKED|ERROR_REVEALED|BEHAVIOR_CHANGED|NO_EFFECT',
                        'headers' => ['<string>', ...],
                        'httpMethod' => 'GET|HEAD|POST|PUT|PATCH|DELETE|OPTIONS',
                        'payload' => '<string>',
                        'responseSnippet' => '<string>',
                        'responseStatus' => <integer>,
                        'targetUrl' => '<string>',
                    ],
                    'exploitable' => 'EXPLOITABLE|NOT_EXPLOITABLE|UNCERTAIN',
                    'findingId' => '<string>',
                    'flowVerdicts' => [
                        [
                            'confidence' => <float>,
                            'evidence' => ['<string>', ...],
                            'flowId' => '<string>',
                            'verdict' => 'CONFIRMED|DENIED|INCONCLUSIVE',
                        ],
                        // ...
                    ],
                    'reasoningChain' => [
                        [
                            'claim' => '<string>',
                            'confidence' => <float>,
                            'source' => '<string>',
                            'step' => <integer>,
                        ],
                        // ...
                    ],
                ],
                // ...
            ],
            'sourceAnalysis' => [
                'inferredEffect' => 'DATA_LEAKED|ERROR_REVEALED|BEHAVIOR_CHANGED|NO_EFFECT',
                'summary' => '<string>',
            ],
            'terminalStatus' => 'COMPLETED|FAILED|NO_SOURCE_AVAILABLE|PARTIAL',
        ],
    ],
    'createdAt' => <DateTime>,
    'mediaType' => '<string>',
    'metadata' => [
    ],
    'producer' => [
        'agent' => '<string>',
    ],
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

GetCodeScan

$result = $client->getCodeScan([/* ... */]);
$promise = $client->getCodeScanAsync([/* ... */]);

Retrieves one customer-visible environment scan.

Parameter Syntax

$result = $client->getCodeScan([
    'environmentId' => '<string>', // REQUIRED
    'scanRunId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'scan' => [
        'completedAt' => <DateTime>,
        'createdAt' => <DateTime>,
        'failureMessage' => '<string>',
        'failureStage' => 'SUBMITTED|WAITING_FOR_BUILD|BUILDING|WAITING_FOR_SCAN|SCANNING',
        'origin' => 'MANUAL|SCHEDULED',
        'scanRunId' => '<string>',
        'status' => 'SUBMITTED|WAITING_FOR_BUILD|BUILDING|WAITING_FOR_SCAN|SCANNING|SUCCEEDED|FAILED',
    ],
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

GetCollector

$result = $client->getCollector([/* ... */]);
$promise = $client->getCollectorAsync([/* ... */]);

Retrieves the current state of the Collector for the caller's account.

Parameter Syntax

$result = $client->getCollector([
    'collectorId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'collectorArn' => '<string>',
    'collectorId' => '<string>',
    'configRecorderArn' => '<string>',
    'createdAt' => <DateTime>,
    'kubernetesClusterRoleArn' => '<string>',
    'status' => 'ACTIVE|PENDING_DELETION',
    'type' => 'AWS_COLLECTOR',
    'updatedAt' => <DateTime>,
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

GetCollectorDataAccessAuthorization

$result = $client->getCollectorDataAccessAuthorization([/* ... */]);
$promise = $client->getCollectorDataAccessAuthorizationAsync([/* ... */]);

Authorizes an Environment's access to a Collector's data. Continuum calls this operation with the Environment's Collector data-access role before it reads the Collector's inventory, so grant continuum:GetCollectorDataAccessAuthorization to that role and, for a Collector in another account, in the Collector's resource policy. The operation evaluates the action against the exact Collector ARN and the Collector's current resource policy using IAM and the caller's authenticated request context, with environmentArn as the continuum:EnvironmentArn condition key. A successful request returns HTTP 200 with no response members. If access is not granted, the operation returns AccessDeniedException without disclosing Collector existence, ownership, or the policy layer that denied access. The service does not reinterpret the policy using only an account ID.

Parameter Syntax

$result = $client->getCollectorDataAccessAuthorization([
    'accountId' => '<string>', // REQUIRED
    'collectorId' => '<string>', // REQUIRED
    'environmentArn' => '<string>',
]);

Parameter Details

Result Syntax

[]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

GetEnvironment

$result = $client->getEnvironment([/* ... */]);
$promise = $client->getEnvironmentAsync([/* ... */]);

Retrieves the current state and configuration of an environment.

Parameter Syntax

$result = $client->getEnvironment([
    'environmentId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'configuration' => [
        'codeConfiguration' => [
            'collectorDetails' => [
                'collectorDataAccessRoleArn' => '<string>',
            ],
            'environmentConfiguration' => [
                'network' => [
                    'allowedDomains' => ['<string>', ...],
                ],
                'patchCreationPolicy' => 'ENABLED|DISABLED',
                'scanFrequency' => '<string>',
            ],
            'latestScan' => [
                'completedAt' => <DateTime>,
                'createdAt' => <DateTime>,
                'failureMessage' => '<string>',
                'failureStage' => 'SUBMITTED|WAITING_FOR_BUILD|BUILDING|WAITING_FOR_SCAN|SCANNING',
                'origin' => 'MANUAL|SCHEDULED',
                'scanRunId' => '<string>',
                'status' => 'SUBMITTED|WAITING_FOR_BUILD|BUILDING|WAITING_FOR_SCAN|SCANNING|SUCCEEDED|FAILED',
            ],
            'sourceConfiguration' => [
                'repositorySources' => [
                    [
                        'defaultBranch' => '<string>',
                        'integrationId' => '<string>',
                        'repository' => '<string>',
                    ],
                    // ...
                ],
                's3Sources' => [
                    [
                        'codePrefix' => '<string>',
                        'contextPrefix' => '<string>',
                        'integrationId' => '<string>',
                    ],
                    // ...
                ],
            ],
        ],
    ],
    'createdAt' => <DateTime>,
    'environmentArn' => '<string>',
    'environmentId' => '<string>',
    'name' => '<string>',
    'status' => 'ACTIVE',
    'statusMessage' => '<string>',
    'statusUpdatedAt' => <DateTime>,
    'updatedAt' => <DateTime>,
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

GetIntegration

$result = $client->getIntegration([/* ... */]);
$promise = $client->getIntegrationAsync([/* ... */]);

Retrieves information about an integration.

Parameter Syntax

$result = $client->getIntegration([
    'integrationId' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'createdAt' => <DateTime>,
    'integrationArn' => '<string>',
    'integrationId' => '<string>',
    'integrationType' => 'GITHUB|GITLAB|S3',
    'name' => '<string>',
    'providerDetails' => [
        'github' => [
            'organizationName' => '<string>',
        ],
        'gitlab' => [
            'expiresAt' => <DateTime>,
            'instanceUrl' => '<string>',
            'targetPath' => '<string>',
            'targetType' => 'GROUP|PROJECT',
            'tokenRotation' => 'AUTOMATIC|NONE',
        ],
        's3' => [
            'bucket' => '<string>',
            'roleArn' => '<string>',
        ],
    ],
    'updatedAt' => <DateTime>,
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

GetResourcePolicy

$result = $client->getResourcePolicy([/* ... */]);
$promise = $client->getResourcePolicyAsync([/* ... */]);

Retrieves the resource policy attached to a Continuum resource.

Parameter Syntax

$result = $client->getResourcePolicy([
    'arn' => '<string>', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'arn' => '<string>',
    'policy' => '<string>',
    'revisionId' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ListAssociatedCollectors

$result = $client->listAssociatedCollectors([/* ... */]);
$promise = $client->listAssociatedCollectorsAsync([/* ... */]);

Lists the Collectors currently associated with one Environment in ascending collectorId order. Each entry carries the Collector ARN, so a listed association can be passed straight to DisassociateCollector, including when the Collector belongs to another account. An association recorded before Continuum persisted the ARN is omitted from the response, because without the ARN it cannot be acted on.

Parameter Syntax

$result = $client->listAssociatedCollectors([
    'environmentId' => '<string>', // REQUIRED
    'maxResults' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'associatedCollectors' => [
        [
            'collectorArn' => '<string>',
            'collectorId' => '<string>',
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ListAssociatedEnvironments

$result = $client->listAssociatedEnvironments([/* ... */]);
$promise = $client->listAssociatedEnvironmentsAsync([/* ... */]);

Lists the Environments currently associated with one Collector in lexicographically ascending environmentArn order. The ARN identifies each Environment across accounts within the Collector's Region.

Parameter Syntax

$result = $client->listAssociatedEnvironments([
    'collectorId' => '<string>', // REQUIRED
    'maxResults' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'associatedEnvironments' => [
        [
            'createdAt' => <DateTime>,
            'environmentArn' => '<string>',
            'environmentId' => '<string>',
            'name' => '<string>',
            'status' => 'ACTIVE',
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ListCodeFindings

$result = $client->listCodeFindings([/* ... */]);
$promise = $client->listCodeFindingsAsync([/* ... */]);

Lists the findings in an environment in descending findingId order.

Parameter Syntax

$result = $client->listCodeFindings([
    'environmentId' => '<string>', // REQUIRED
    'maxResults' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'items' => [
        [
            'category' => '<string>',
            'completedAt' => <DateTime>,
            'createdAt' => <DateTime>,
            'createdIssueId' => '<string>',
            'discardReason' => 'SCANNER_VALIDATED_FALSE_POSITIVE|SCANNER_NEEDS_REVIEW|FALSE_POSITIVE_VALIDATED_AGAINST_CONTEXT|DUPLICATE_OF_OPEN_ISSUE|DUPLICATE_OF_CLOSED_ISSUE|COMPENSATING_CONTROL_PRESENT|OUT_OF_SCOPE|INSUFFICIENT_EVIDENCE|PROCESSING_FAILED|SOURCE_REPO_NOT_FOUND',
            'discardReasoning' => '<string>',
            'duplicateOfIssueId' => '<string>',
            'environmentId' => '<string>',
            'filePath' => '<string>',
            'findingArn' => '<string>',
            'findingId' => '<string>',
            'reportedAt' => <DateTime>,
            'scanRunId' => '<string>',
            'severity' => 'UNKNOWN|INFORMATIONAL|LOW|MEDIUM|HIGH|CRITICAL|FATAL|OTHER',
            'source' => '<string>',
            'sourceFindingId' => '<string>',
            'status' => 'SUBMITTED|VALIDATING|CONFIRMED|DISCARDED',
            'statusMessage' => '<string>',
            'statusUpdatedAt' => <DateTime>,
            'title' => '<string>',
            'type' => 'CONTINUUM_CODE_VULN|CUSTOMER_CODE_VULN',
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ListCodeIssueArtifacts

$result = $client->listCodeIssueArtifacts([/* ... */]);
$promise = $client->listCodeIssueArtifactsAsync([/* ... */]);

Lists the artifacts attached to an issue in descending artifactId order. Content is returned by GetCodeIssueArtifact.

Parameter Syntax

$result = $client->listCodeIssueArtifacts([
    'artifactType' => 'EVIDENCE|AGENT_COMMUNICATION|VALIDATION_EVIDENCE|REMEDIATION_PROPOSAL|DECISION|PATCH',
    'environmentId' => '<string>', // REQUIRED
    'issueId' => '<string>', // REQUIRED
    'maxResults' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'items' => [
        [
            'artifactId' => '<string>',
            'artifactType' => 'EVIDENCE|AGENT_COMMUNICATION|VALIDATION_EVIDENCE|REMEDIATION_PROPOSAL|DECISION|PATCH',
            'contentSizeBytes' => <integer>,
            'createdAt' => <DateTime>,
            'mediaType' => '<string>',
            'producer' => [
                'agent' => '<string>',
            ],
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ListCodeIssues

$result = $client->listCodeIssues([/* ... */]);
$promise = $client->listCodeIssuesAsync([/* ... */]);

Lists the issues in an environment in descending issueId order.

Parameter Syntax

$result = $client->listCodeIssues([
    'environmentId' => '<string>', // REQUIRED
    'maxResults' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'items' => [
        [
            'confidence' => <integer>,
            'createdAt' => <DateTime>,
            'issueArn' => '<string>',
            'issueId' => '<string>',
            'name' => '<string>',
            'phase' => 'VALIDATION|PRIORITIZATION|REMEDIATION',
            'severity' => 'LOW|MEDIUM|HIGH|CRITICAL',
            'status' => 'CREATED|IN_PROGRESS|COMPLETED|FAILED',
            'statusMessage' => '<string>',
            'statusReason' => 'INTERNAL_ERROR|REMEDIATION_FAILED',
            'statusUpdatedAt' => <DateTime>,
            'updatedAt' => <DateTime>,
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ListCodeScans

$result = $client->listCodeScans([/* ... */]);
$promise = $client->listCodeScansAsync([/* ... */]);

Lists customer-visible scans for one environment in descending scanRunId order.

Parameter Syntax

$result = $client->listCodeScans([
    'environmentId' => '<string>', // REQUIRED
    'maxResults' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'nextToken' => '<string>',
    'scans' => [
        [
            'completedAt' => <DateTime>,
            'createdAt' => <DateTime>,
            'failureMessage' => '<string>',
            'failureStage' => 'SUBMITTED|WAITING_FOR_BUILD|BUILDING|WAITING_FOR_SCAN|SCANNING',
            'origin' => 'MANUAL|SCHEDULED',
            'scanRunId' => '<string>',
            'status' => 'SUBMITTED|WAITING_FOR_BUILD|BUILDING|WAITING_FOR_SCAN|SCANNING|SUCCEEDED|FAILED',
        ],
        // ...
    ],
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ListCollectors

$result = $client->listCollectors([/* ... */]);
$promise = $client->listCollectorsAsync([/* ... */]);

Lists the Collectors owned by the authenticated caller's account, including a Collector whose deletion is in progress. A Collector that is still being created is omitted. The account-scoped Collector quota currently permits at most one result, so no result ordering applies.

Parameter Syntax

$result = $client->listCollectors([
]);

Parameter Details

Result Syntax

[
    'items' => [
        [
            'collectorArn' => '<string>',
            'collectorId' => '<string>',
            'createdAt' => <DateTime>,
            'status' => 'ACTIVE|PENDING_DELETION',
            'type' => 'AWS_COLLECTOR',
        ],
        // ...
    ],
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ListEnvironments

$result = $client->listEnvironments([/* ... */]);
$promise = $client->listEnvironmentsAsync([/* ... */]);

Lists all environments in your account in descending environmentId order. This complete-inventory operation intentionally has no response filters; see the input documentation for the API standards justification.

Parameter Syntax

$result = $client->listEnvironments([
    'maxResults' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'items' => [
        [
            'createdAt' => <DateTime>,
            'environmentArn' => '<string>',
            'environmentId' => '<string>',
            'name' => '<string>',
            'status' => 'ACTIVE',
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ListIntegrations

$result = $client->listIntegrations([/* ... */]);
$promise = $client->listIntegrationsAsync([/* ... */]);

Lists the integrations in your account in descending integrationId order.

Parameter Syntax

$result = $client->listIntegrations([
    'maxResults' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Result Syntax

[
    'items' => [
        [
            'createdAt' => <DateTime>,
            'integrationArn' => '<string>',
            'integrationId' => '<string>',
            'integrationType' => 'GITHUB|GITLAB|S3',
            'name' => '<string>',
            'providerDetails' => [
                'github' => [
                    'organizationName' => '<string>',
                ],
                'gitlab' => [
                    'expiresAt' => <DateTime>,
                    'instanceUrl' => '<string>',
                    'targetPath' => '<string>',
                    'targetType' => 'GROUP|PROJECT',
                    'tokenRotation' => 'AUTOMATIC|NONE',
                ],
                's3' => [
                    'bucket' => '<string>',
                    'roleArn' => '<string>',
                ],
            ],
            'updatedAt' => <DateTime>,
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

PutResourcePolicy

$result = $client->putResourcePolicy([/* ... */]);
$promise = $client->putResourcePolicyAsync([/* ... */]);

Creates or replaces the resource policy attached to a Continuum resource.

Parameter Syntax

$result = $client->putResourcePolicy([
    'arn' => '<string>', // REQUIRED
    'expectedRevisionId' => '<string>',
    'policy' => '<string>',
]);

Parameter Details

Result Syntax

[
    'arn' => '<string>',
    'policy' => '<string>',
    'revisionId' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

StartIntegrationAuthorization

$result = $client->startIntegrationAuthorization([/* ... */]);
$promise = $client->startIntegrationAuthorizationAsync([/* ... */]);

Starts an OAuth authorization for a new integration and returns the values the caller sends to the provider's authorization endpoint. The authorization belongs to the calling AWS account, can be redeemed once by CreateIntegration from that same account, and expires after ten minutes.

Parameter Syntax

$result = $client->startIntegrationAuthorization([
    'name' => '<string>',
    'providerType' => 'GITHUB', // REQUIRED
]);

Parameter Details

Result Syntax

[
    'codeChallenge' => '<string>',
    'codeChallengeMethod' => 'S256',
    'expiresAt' => <DateTime>,
    'state' => '<string>',
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

UpdateCollector

$result = $client->updateCollector([/* ... */]);
$promise = $client->updateCollectorAsync([/* ... */]);

Updates the customer-controlled mutable properties of a Collector. Only the name and Kubernetes cluster IAM role can be changed.

Parameter Syntax

$result = $client->updateCollector([
    'collectorId' => '<string>', // REQUIRED
    'kubernetesClusterRole' => [
        'remove' => [
        ],
        'set' => [
            'externalId' => '<string>',
            'roleArn' => '<string>', // REQUIRED
        ],
    ],
    'name' => '<string>',
]);

Parameter Details

Result Syntax

[
    'collectorArn' => '<string>',
    'collectorId' => '<string>',
    'configRecorderArn' => '<string>',
    'createdAt' => <DateTime>,
    'kubernetesClusterRoleArn' => '<string>',
    'status' => 'ACTIVE|PENDING_DELETION',
    'type' => 'AWS_COLLECTOR',
    'updatedAt' => <DateTime>,
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

UpdateEnvironment

$result = $client->updateEnvironment([/* ... */]);
$promise = $client->updateEnvironmentAsync([/* ... */]);

Updates the customer-controlled mutable properties of an environment. Only the name, the environment's S3 integration source and repository selections, its scan frequency, its network policy, and its patch creation policy can be changed.

Parameter Syntax

$result = $client->updateEnvironment([
    'configuration' => [
        'codeConfiguration' => [
            'environmentConfiguration' => [
                'network' => [
                    'allowedDomains' => ['<string>', ...],
                ],
                'patchCreationPolicy' => 'ENABLED|DISABLED',
                'scanFrequency' => '<string>',
            ],
            'sourceConfiguration' => [
                'repositorySources' => [
                    [
                        'defaultBranch' => '<string>',
                        'integrationId' => '<string>', // REQUIRED
                        'repository' => '<string>', // REQUIRED
                    ],
                    // ...
                ],
                's3Sources' => [
                    [
                        'codePrefix' => '<string>',
                        'contextPrefix' => '<string>',
                        'integrationId' => '<string>', // REQUIRED
                    ],
                    // ...
                ],
            ],
        ],
    ],
    'environmentId' => '<string>', // REQUIRED
    'name' => '<string>',
]);

Parameter Details

Result Syntax

[
    'configuration' => [
        'codeConfiguration' => [
            'collectorDetails' => [
                'collectorDataAccessRoleArn' => '<string>',
            ],
            'environmentConfiguration' => [
                'network' => [
                    'allowedDomains' => ['<string>', ...],
                ],
                'patchCreationPolicy' => 'ENABLED|DISABLED',
                'scanFrequency' => '<string>',
            ],
            'latestScan' => [
                'completedAt' => <DateTime>,
                'createdAt' => <DateTime>,
                'failureMessage' => '<string>',
                'failureStage' => 'SUBMITTED|WAITING_FOR_BUILD|BUILDING|WAITING_FOR_SCAN|SCANNING',
                'origin' => 'MANUAL|SCHEDULED',
                'scanRunId' => '<string>',
                'status' => 'SUBMITTED|WAITING_FOR_BUILD|BUILDING|WAITING_FOR_SCAN|SCANNING|SUCCEEDED|FAILED',
            ],
            'sourceConfiguration' => [
                'repositorySources' => [
                    [
                        'defaultBranch' => '<string>',
                        'integrationId' => '<string>',
                        'repository' => '<string>',
                    ],
                    // ...
                ],
                's3Sources' => [
                    [
                        'codePrefix' => '<string>',
                        'contextPrefix' => '<string>',
                        'integrationId' => '<string>',
                    ],
                    // ...
                ],
            ],
        ],
    ],
    'createdAt' => <DateTime>,
    'environmentArn' => '<string>',
    'environmentId' => '<string>',
    'name' => '<string>',
    'status' => 'ACTIVE',
    'statusMessage' => '<string>',
    'statusUpdatedAt' => <DateTime>,
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.

UpdateIntegration

$result = $client->updateIntegration([/* ... */]);
$promise = $client->updateIntegrationAsync([/* ... */]);

Rotates the credentials used by an Amazon S3 integration. Only S3 integrations can be updated; GitHub integrations cannot be modified. The integration's name, provider type, and bucket remain fixed.

The caller must have iam:PassRole permission for the supplied role, including when only the external ID changes. Continuum verifies that the role can be assumed with the requested external ID and can access the existing bucket before saving both credentials atomically. Omitting externalId preserves its current value. Repeating both current credentials leaves updatedAt unchanged, but still requires authorization and access validation.

Parameter Syntax

$result = $client->updateIntegration([
    'integrationId' => '<string>', // REQUIRED
    'providerConfiguration' => [ // REQUIRED
        's3' => [
            'externalId' => '<string>',
            'roleArn' => '<string>', // REQUIRED
        ],
    ],
]);

Parameter Details

Result Syntax

[
    'createdAt' => <DateTime>,
    'integrationArn' => '<string>',
    'integrationId' => '<string>',
    'integrationType' => 'GITHUB|GITLAB|S3',
    'name' => '<string>',
    'providerDetails' => [
        'github' => [
            'organizationName' => '<string>',
        ],
        'gitlab' => [
            'expiresAt' => <DateTime>,
            'instanceUrl' => '<string>',
            'targetPath' => '<string>',
            'targetType' => 'GROUP|PROJECT',
            'tokenRotation' => 'AUTOMATIC|NONE',
        ],
        's3' => [
            'bucket' => '<string>',
            'roleArn' => '<string>',
        ],
    ],
    'updatedAt' => <DateTime>,
]

Result Details

Errors

ValidationException:

This error does not currently have a description.

InternalServerException:

The request couldn't be processed because of an internal server issue. Try again later. If the problem persists, contact AWS Support.

ResourceNotFoundException:

The specified resource was not found. Verify that the resource identifier is correct and that the resource exists.

ThrottlingException:

The request was denied due to request throttling.

AccessDeniedException:

The request is not authorized. Verify that your credentials and request signature are valid and that you have permission to perform this action.

ConflictException:

The request could not be completed due to a conflict with the current state of the resource.