AWS SDK for PHP 3.x

Client: Aws\EMRContainers\EMRContainersClient

Service ID: emr-containers

Version: 2020-10-01

This page describes the parameters and results for the operations of the Amazon EMR Containers (2020-10-01), and shows how to use the Aws\EMRContainers\EMRContainersClient object to call the described operations. This documentation is specific to the 2020-10-01 API version of the service.

Operation Summary

Each of the following operations can be created from a client using $client->getCommand('CommandName'), where "CommandName" is the name of one of the following operations. Note: a command is a value that encapsulates an operation and the parameters used to create an HTTP request.

You can also create and send a command immediately using the magic methods available on a client object: $client->commandName(/* parameters */). You can send the command asynchronously (returning a promise) by appending the word "Async" to the operation name: $client->commandNameAsync(/* parameters */).

CancelJobRun ( array $params = [] ): Cancels a job run.
CreateJobTemplate ( array $params = [] ): Creates a job template.
CreateManagedEndpoint ( array $params = [] ): Creates a managed endpoint.
CreateSecurityConfiguration ( array $params = [] ): Creates a security configuration.
CreateVirtualCluster ( array $params = [] ): Creates a virtual cluster.
DeleteJobTemplate ( array $params = [] ): Deletes a job template.
DeleteManagedEndpoint ( array $params = [] ): Deletes a managed endpoint.
DeleteVirtualCluster ( array $params = [] ): Deletes a virtual cluster.
DescribeJobRun ( array $params = [] ): Displays detailed information about a job run.
DescribeJobTemplate ( array $params = [] ): Displays detailed information about a specified job template.
DescribeManagedEndpoint ( array $params = [] ): Displays detailed information about a managed endpoint.
DescribeSecurityConfiguration ( array $params = [] ): Displays detailed information about a specified security configuration.
DescribeVirtualCluster ( array $params = [] ): Displays detailed information about a specified virtual cluster.
GetManagedEndpointSessionCredentials ( array $params = [] ): Generate a session token to connect to a managed endpoint.
ListJobRuns ( array $params = [] ): Lists job runs based on a set of parameters.
ListJobTemplates ( array $params = [] ): Lists job templates based on a set of parameters.
ListManagedEndpoints ( array $params = [] ): Lists managed endpoints based on a set of parameters.
ListSecurityConfigurations ( array $params = [] ): Lists security configurations based on a set of parameters.
ListTagsForResource ( array $params = [] ): Lists the tags assigned to the resources.
ListVirtualClusters ( array $params = [] ): Lists information about the specified virtual cluster.
StartJobRun ( array $params = [] ): Starts a job run.
TagResource ( array $params = [] ): Assigns tags to resources.
UntagResource ( array $params = [] ): Removes tags from resources.

Paginators

Paginators handle automatically iterating over paginated API results. Paginators are associated with specific API operations, and they accept the parameters that the corresponding API operation accepts. You can get a paginator from a client class using getPaginator($paginatorName, $operationParameters). This client supports the following paginators:

ListJobRuns
ListJobTemplates
ListManagedEndpoints
ListSecurityConfigurations
ListVirtualClusters

Operations

CancelJobRun

$result = $client->cancelJobRun([/* ... */]);
$promise = $client->cancelJobRunAsync([/* ... */]);

Cancels a job run. A job run is a unit of work, such as a Spark jar, PySpark script, or SparkSQL query, that you submit to Amazon EMR on EKS.

Parameter Syntax

$result = $client->cancelJobRun([
    'id' => '<string>', // REQUIRED
    'virtualClusterId' => '<string>', // REQUIRED
]);

Parameter Details

Members

id

Required: Yes
Type: string

The ID of the job run to cancel.

virtualClusterId

Required: Yes
Type: string

The ID of the virtual cluster for which the job run will be canceled.

Result Syntax

[
    'id' => '<string>',
    'virtualClusterId' => '<string>',
]

Result Details

Members

id

Type: string

The output contains the ID of the cancelled job run.

virtualClusterId

Type: string

The output contains the virtual cluster ID for which the job run is cancelled.

Errors

ValidationException:
There are invalid parameters in the client request.
InternalServerException:
This is an internal server exception.

CreateJobTemplate

$result = $client->createJobTemplate([/* ... */]);
$promise = $client->createJobTemplateAsync([/* ... */]);

Creates a job template. Job template stores values of StartJobRun API request in a template and can be used to start a job run. Job template allows two use cases: avoid repeating recurring StartJobRun API request values, enforcing certain values in StartJobRun API request.

Parameter Syntax

$result = $client->createJobTemplate([
    'clientToken' => '<string>', // REQUIRED
    'jobTemplateData' => [ // REQUIRED
        'configurationOverrides' => [
            'applicationConfiguration' => [
                [
                    'classification' => '<string>', // REQUIRED
                    'configurations' => [...], // RECURSIVE
                    'properties' => ['<string>', ...],
                ],
                // ...
            ],
            'monitoringConfiguration' => [
                'cloudWatchMonitoringConfiguration' => [
                    'logGroupName' => '<string>',
                    'logStreamNamePrefix' => '<string>',
                ],
                'persistentAppUI' => '<string>',
                's3MonitoringConfiguration' => [
                    'logUri' => '<string>',
                ],
            ],
        ],
        'executionRoleArn' => '<string>', // REQUIRED
        'jobDriver' => [ // REQUIRED
            'sparkSqlJobDriver' => [
                'entryPoint' => '<string>',
                'sparkSqlParameters' => '<string>',
            ],
            'sparkSubmitJobDriver' => [
                'entryPoint' => '<string>', // REQUIRED
                'entryPointArguments' => ['<string>', ...],
                'sparkSubmitParameters' => '<string>',
            ],
        ],
        'jobTags' => ['<string>', ...],
        'parameterConfiguration' => [
            '<TemplateParameterName>' => [
                'defaultValue' => '<string>',
                'type' => 'NUMBER|STRING',
            ],
            // ...
        ],
        'releaseLabel' => '<string>', // REQUIRED
    ],
    'kmsKeyArn' => '<string>',
    'name' => '<string>', // REQUIRED
    'tags' => ['<string>', ...],
]);

Parameter Details

Members

clientToken

Required: Yes
Type: string

The client token of the job template.

jobTemplateData

Required: Yes
Type: JobTemplateData structure

The job template data which holds values of StartJobRun API request.

kmsKeyArn

Type: string

The KMS key ARN used to encrypt the job template.

name

Required: Yes
Type: string

The specified name of the job template.

tags

Type: Associative array of custom strings keys (String128) to strings

The tags that are associated with the job template.

Result Syntax

[
    'arn' => '<string>',
    'createdAt' => <DateTime>,
    'id' => '<string>',
    'name' => '<string>',
]

Result Details

Members

arn

Type: string

This output display the ARN of the created job template.

createdAt

Type: timestamp (string|DateTime or anything parsable by strtotime)

This output displays the date and time when the job template was created.

id

Type: string

This output display the created job template ID.

name

Type: string

This output displays the name of the created job template.

Errors

ValidationException:
There are invalid parameters in the client request.
ResourceNotFoundException:
The specified resource was not found.
InternalServerException:
This is an internal server exception.

CreateManagedEndpoint

$result = $client->createManagedEndpoint([/* ... */]);
$promise = $client->createManagedEndpointAsync([/* ... */]);

Creates a managed endpoint. A managed endpoint is a gateway that connects Amazon EMR Studio to Amazon EMR on EKS so that Amazon EMR Studio can communicate with your virtual cluster.

Parameter Syntax

$result = $client->createManagedEndpoint([
    'certificateArn' => '<string>',
    'clientToken' => '<string>', // REQUIRED
    'configurationOverrides' => [
        'applicationConfiguration' => [
            [
                'classification' => '<string>', // REQUIRED
                'configurations' => [...], // RECURSIVE
                'properties' => ['<string>', ...],
            ],
            // ...
        ],
        'monitoringConfiguration' => [
            'cloudWatchMonitoringConfiguration' => [
                'logGroupName' => '<string>', // REQUIRED
                'logStreamNamePrefix' => '<string>',
            ],
            'containerLogRotationConfiguration' => [
                'maxFilesToKeep' => <integer>, // REQUIRED
                'rotationSize' => '<string>', // REQUIRED
            ],
            'persistentAppUI' => 'ENABLED|DISABLED',
            's3MonitoringConfiguration' => [
                'logUri' => '<string>', // REQUIRED
            ],
        ],
    ],
    'executionRoleArn' => '<string>', // REQUIRED
    'name' => '<string>', // REQUIRED
    'releaseLabel' => '<string>', // REQUIRED
    'tags' => ['<string>', ...],
    'type' => '<string>', // REQUIRED
    'virtualClusterId' => '<string>', // REQUIRED
]);

Parameter Details

Members

certificateArn

Type: string

The certificate ARN provided by users for the managed endpoint. This field is under deprecation and will be removed in future releases.

clientToken

Required: Yes
Type: string

The client idempotency token for this create call.

configurationOverrides

Type: ConfigurationOverrides structure

The configuration settings that will be used to override existing configurations.

executionRoleArn

Required: Yes
Type: string

The ARN of the execution role.

name

Required: Yes
Type: string

The name of the managed endpoint.

releaseLabel

Required: Yes
Type: string

The Amazon EMR release version.

tags

Type: Associative array of custom strings keys (String128) to strings

The tags of the managed endpoint.

type

Required: Yes
Type: string

The type of the managed endpoint.

virtualClusterId

Required: Yes
Type: string

The ID of the virtual cluster for which a managed endpoint is created.

Result Syntax

[
    'arn' => '<string>',
    'id' => '<string>',
    'name' => '<string>',
    'virtualClusterId' => '<string>',
]

Result Details

Members

arn

Type: string

The output contains the ARN of the managed endpoint.

id

Type: string

The output contains the ID of the managed endpoint.

name

Type: string

The output contains the name of the managed endpoint.

virtualClusterId

Type: string

The output contains the ID of the virtual cluster.

Errors

ValidationException:
There are invalid parameters in the client request.
ResourceNotFoundException:
The specified resource was not found.
InternalServerException:
This is an internal server exception.

CreateSecurityConfiguration

$result = $client->createSecurityConfiguration([/* ... */]);
$promise = $client->createSecurityConfigurationAsync([/* ... */]);

Creates a security configuration. Security configurations in Amazon EMR on EKS are templates for different security setups. You can use security configurations to configure the Lake Formation integration setup. You can also create a security configuration to re-use a security setup each time you create a virtual cluster.

Parameter Syntax

$result = $client->createSecurityConfiguration([
    'clientToken' => '<string>', // REQUIRED
    'name' => '<string>', // REQUIRED
    'securityConfigurationData' => [ // REQUIRED
        'authorizationConfiguration' => [
            'encryptionConfiguration' => [
                'inTransitEncryptionConfiguration' => [
                    'tlsCertificateConfiguration' => [
                        'certificateProviderType' => 'PEM',
                        'privateCertificateSecretArn' => '<string>',
                        'publicCertificateSecretArn' => '<string>',
                    ],
                ],
            ],
            'lakeFormationConfiguration' => [
                'authorizedSessionTagValue' => '<string>',
                'queryEngineRoleArn' => '<string>',
                'secureNamespaceInfo' => [
                    'clusterId' => '<string>',
                    'namespace' => '<string>',
                ],
            ],
        ],
    ],
    'tags' => ['<string>', ...],
]);

Parameter Details

Members

clientToken

Required: Yes
Type: string

The client idempotency token to use when creating the security configuration.

name

Required: Yes
Type: string

The name of the security configuration.

securityConfigurationData

Required: Yes
Type: SecurityConfigurationData structure

Security configuration input for the request.

tags

Type: Associative array of custom strings keys (String128) to strings

The tags to add to the security configuration.

Result Syntax

[
    'arn' => '<string>',
    'id' => '<string>',
    'name' => '<string>',
]

Result Details

Members

arn

Type: string

The ARN (Amazon Resource Name) of the security configuration.

id

Type: string

The ID of the security configuration.

name

Type: string

The name of the security configuration.

Errors

ValidationException:
There are invalid parameters in the client request.
InternalServerException:
This is an internal server exception.

CreateVirtualCluster

$result = $client->createVirtualCluster([/* ... */]);
$promise = $client->createVirtualClusterAsync([/* ... */]);

Creates a virtual cluster. Virtual cluster is a managed entity on Amazon EMR on EKS. You can create, describe, list and delete virtual clusters. They do not consume any additional resource in your system. A single virtual cluster maps to a single Kubernetes namespace. Given this relationship, you can model virtual clusters the same way you model Kubernetes namespaces to meet your requirements.

Parameter Syntax

$result = $client->createVirtualCluster([
    'clientToken' => '<string>', // REQUIRED
    'containerProvider' => [ // REQUIRED
        'id' => '<string>', // REQUIRED
        'info' => [
            'eksInfo' => [
                'namespace' => '<string>',
            ],
        ],
        'type' => 'EKS', // REQUIRED
    ],
    'name' => '<string>', // REQUIRED
    'securityConfigurationId' => '<string>',
    'tags' => ['<string>', ...],
]);

Parameter Details

Members

clientToken

Required: Yes
Type: string

The client token of the virtual cluster.

containerProvider

Required: Yes
Type: ContainerProvider structure

The container provider of the virtual cluster.

name

Required: Yes
Type: string

The specified name of the virtual cluster.

securityConfigurationId

Type: string

The ID of the security configuration.

tags

Type: Associative array of custom strings keys (String128) to strings

The tags assigned to the virtual cluster.

Result Syntax

[
    'arn' => '<string>',
    'id' => '<string>',
    'name' => '<string>',
]

Result Details

Members

arn

Type: string

This output contains the ARN of virtual cluster.

id

Type: string

This output contains the virtual cluster ID.

name

Type: string

This output contains the name of the virtual cluster.

Errors

ValidationException:
There are invalid parameters in the client request.
ResourceNotFoundException:
The specified resource was not found.
InternalServerException:
This is an internal server exception.
EKSRequestThrottledException:
The request exceeded the Amazon EKS API operation limits.

DeleteJobTemplate

$result = $client->deleteJobTemplate([/* ... */]);
$promise = $client->deleteJobTemplateAsync([/* ... */]);

Deletes a job template. Job template stores values of StartJobRun API request in a template and can be used to start a job run. Job template allows two use cases: avoid repeating recurring StartJobRun API request values, enforcing certain values in StartJobRun API request.

Parameter Syntax

$result = $client->deleteJobTemplate([
    'id' => '<string>', // REQUIRED
]);

Parameter Details

Members

id

Required: Yes
Type: string

The ID of the job template that will be deleted.

Result Syntax

[
    'id' => '<string>',
]

Result Details

Members

id

Type: string

This output contains the ID of the job template that was deleted.

Errors

ValidationException:
There are invalid parameters in the client request.
InternalServerException:
This is an internal server exception.

DeleteManagedEndpoint

$result = $client->deleteManagedEndpoint([/* ... */]);
$promise = $client->deleteManagedEndpointAsync([/* ... */]);

Deletes a managed endpoint. A managed endpoint is a gateway that connects Amazon EMR Studio to Amazon EMR on EKS so that Amazon EMR Studio can communicate with your virtual cluster.

Parameter Syntax

$result = $client->deleteManagedEndpoint([
    'id' => '<string>', // REQUIRED
    'virtualClusterId' => '<string>', // REQUIRED
]);

Parameter Details

Members

id

Required: Yes
Type: string

The ID of the managed endpoint.

virtualClusterId

Required: Yes
Type: string

The ID of the endpoint's virtual cluster.

Result Syntax

[
    'id' => '<string>',
    'virtualClusterId' => '<string>',
]

Result Details

Members

id

Type: string

The output displays the ID of the managed endpoint.

virtualClusterId

Type: string

The output displays the ID of the endpoint's virtual cluster.

Errors

ValidationException:
There are invalid parameters in the client request.
InternalServerException:
This is an internal server exception.

DeleteVirtualCluster

$result = $client->deleteVirtualCluster([/* ... */]);
$promise = $client->deleteVirtualClusterAsync([/* ... */]);

Deletes a virtual cluster. Virtual cluster is a managed entity on Amazon EMR on EKS. You can create, describe, list and delete virtual clusters. They do not consume any additional resource in your system. A single virtual cluster maps to a single Kubernetes namespace. Given this relationship, you can model virtual clusters the same way you model Kubernetes namespaces to meet your requirements.

Parameter Syntax

$result = $client->deleteVirtualCluster([
    'id' => '<string>', // REQUIRED
]);

Parameter Details

Members

id

Required: Yes
Type: string

The ID of the virtual cluster that will be deleted.

Result Syntax

[
    'id' => '<string>',
]

Result Details

Members

id

Type: string

This output contains the ID of the virtual cluster that will be deleted.

Errors

ValidationException:
There are invalid parameters in the client request.
InternalServerException:
This is an internal server exception.

DescribeJobRun

$result = $client->describeJobRun([/* ... */]);
$promise = $client->describeJobRunAsync([/* ... */]);

Displays detailed information about a job run. A job run is a unit of work, such as a Spark jar, PySpark script, or SparkSQL query, that you submit to Amazon EMR on EKS.

Parameter Syntax

$result = $client->describeJobRun([
    'id' => '<string>', // REQUIRED
    'virtualClusterId' => '<string>', // REQUIRED
]);

Parameter Details

Members

id

Required: Yes
Type: string

The ID of the job run request.

virtualClusterId

Required: Yes
Type: string

The ID of the virtual cluster for which the job run is submitted.

Result Syntax

[
    'jobRun' => [
        'arn' => '<string>',
        'clientToken' => '<string>',
        'configurationOverrides' => [
            'applicationConfiguration' => [
                [
                    'classification' => '<string>',
                    'configurations' => [...], // RECURSIVE
                    'properties' => ['<string>', ...],
                ],
                // ...
            ],
            'monitoringConfiguration' => [
                'cloudWatchMonitoringConfiguration' => [
                    'logGroupName' => '<string>',
                    'logStreamNamePrefix' => '<string>',
                ],
                'containerLogRotationConfiguration' => [
                    'maxFilesToKeep' => <integer>,
                    'rotationSize' => '<string>',
                ],
                'persistentAppUI' => 'ENABLED|DISABLED',
                's3MonitoringConfiguration' => [
                    'logUri' => '<string>',
                ],
            ],
        ],
        'createdAt' => <DateTime>,
        'createdBy' => '<string>',
        'executionRoleArn' => '<string>',
        'failureReason' => 'INTERNAL_ERROR|USER_ERROR|VALIDATION_ERROR|CLUSTER_UNAVAILABLE',
        'finishedAt' => <DateTime>,
        'id' => '<string>',
        'jobDriver' => [
            'sparkSqlJobDriver' => [
                'entryPoint' => '<string>',
                'sparkSqlParameters' => '<string>',
            ],
            'sparkSubmitJobDriver' => [
                'entryPoint' => '<string>',
                'entryPointArguments' => ['<string>', ...],
                'sparkSubmitParameters' => '<string>',
            ],
        ],
        'name' => '<string>',
        'releaseLabel' => '<string>',
        'retryPolicyConfiguration' => [
            'maxAttempts' => <integer>,
        ],
        'retryPolicyExecution' => [
            'currentAttemptCount' => <integer>,
        ],
        'state' => 'PENDING|SUBMITTED|RUNNING|FAILED|CANCELLED|CANCEL_PENDING|COMPLETED',
        'stateDetails' => '<string>',
        'tags' => ['<string>', ...],
        'virtualClusterId' => '<string>',
    ],
]

Result Details

Members

jobRun

Type: JobRun structure

The output displays information about a job run.

Errors

ValidationException:
There are invalid parameters in the client request.
ResourceNotFoundException:
The specified resource was not found.
InternalServerException:
This is an internal server exception.

DescribeJobTemplate

$result = $client->describeJobTemplate([/* ... */]);
$promise = $client->describeJobTemplateAsync([/* ... */]);

Displays detailed information about a specified job template. Job template stores values of StartJobRun API request in a template and can be used to start a job run. Job template allows two use cases: avoid repeating recurring StartJobRun API request values, enforcing certain values in StartJobRun API request.

Parameter Syntax

$result = $client->describeJobTemplate([
    'id' => '<string>', // REQUIRED
]);

Parameter Details

Members

id

Required: Yes
Type: string

The ID of the job template that will be described.

Result Syntax

[
    'jobTemplate' => [
        'arn' => '<string>',
        'createdAt' => <DateTime>,
        'createdBy' => '<string>',
        'decryptionError' => '<string>',
        'id' => '<string>',
        'jobTemplateData' => [
            'configurationOverrides' => [
                'applicationConfiguration' => [
                    [
                        'classification' => '<string>',
                        'configurations' => [...], // RECURSIVE
                        'properties' => ['<string>', ...],
                    ],
                    // ...
                ],
                'monitoringConfiguration' => [
                    'cloudWatchMonitoringConfiguration' => [
                        'logGroupName' => '<string>',
                        'logStreamNamePrefix' => '<string>',
                    ],
                    'persistentAppUI' => '<string>',
                    's3MonitoringConfiguration' => [
                        'logUri' => '<string>',
                    ],
                ],
            ],
            'executionRoleArn' => '<string>',
            'jobDriver' => [
                'sparkSqlJobDriver' => [
                    'entryPoint' => '<string>',
                    'sparkSqlParameters' => '<string>',
                ],
                'sparkSubmitJobDriver' => [
                    'entryPoint' => '<string>',
                    'entryPointArguments' => ['<string>', ...],
                    'sparkSubmitParameters' => '<string>',
                ],
            ],
            'jobTags' => ['<string>', ...],
            'parameterConfiguration' => [
                '<TemplateParameterName>' => [
                    'defaultValue' => '<string>',
                    'type' => 'NUMBER|STRING',
                ],
                // ...
            ],
            'releaseLabel' => '<string>',
        ],
        'kmsKeyArn' => '<string>',
        'name' => '<string>',
        'tags' => ['<string>', ...],
    ],
]

Result Details

Members

jobTemplate

Type: JobTemplate structure

This output displays information about the specified job template.

Errors

ValidationException:
There are invalid parameters in the client request.
ResourceNotFoundException:
The specified resource was not found.
InternalServerException:
This is an internal server exception.

DescribeManagedEndpoint

$result = $client->describeManagedEndpoint([/* ... */]);
$promise = $client->describeManagedEndpointAsync([/* ... */]);

Displays detailed information about a managed endpoint. A managed endpoint is a gateway that connects Amazon EMR Studio to Amazon EMR on EKS so that Amazon EMR Studio can communicate with your virtual cluster.

Parameter Syntax

$result = $client->describeManagedEndpoint([
    'id' => '<string>', // REQUIRED
    'virtualClusterId' => '<string>', // REQUIRED
]);

Parameter Details

Members

id

Required: Yes
Type: string

This output displays ID of the managed endpoint.

virtualClusterId

Required: Yes
Type: string

The ID of the endpoint's virtual cluster.

Result Syntax

[
    'endpoint' => [
        'arn' => '<string>',
        'certificateArn' => '<string>',
        'certificateAuthority' => [
            'certificateArn' => '<string>',
            'certificateData' => '<string>',
        ],
        'configurationOverrides' => [
            'applicationConfiguration' => [
                [
                    'classification' => '<string>',
                    'configurations' => [...], // RECURSIVE
                    'properties' => ['<string>', ...],
                ],
                // ...
            ],
            'monitoringConfiguration' => [
                'cloudWatchMonitoringConfiguration' => [
                    'logGroupName' => '<string>',
                    'logStreamNamePrefix' => '<string>',
                ],
                'containerLogRotationConfiguration' => [
                    'maxFilesToKeep' => <integer>,
                    'rotationSize' => '<string>',
                ],
                'persistentAppUI' => 'ENABLED|DISABLED',
                's3MonitoringConfiguration' => [
                    'logUri' => '<string>',
                ],
            ],
        ],
        'createdAt' => <DateTime>,
        'executionRoleArn' => '<string>',
        'failureReason' => 'INTERNAL_ERROR|USER_ERROR|VALIDATION_ERROR|CLUSTER_UNAVAILABLE',
        'id' => '<string>',
        'name' => '<string>',
        'releaseLabel' => '<string>',
        'securityGroup' => '<string>',
        'serverUrl' => '<string>',
        'state' => 'CREATING|ACTIVE|TERMINATING|TERMINATED|TERMINATED_WITH_ERRORS',
        'stateDetails' => '<string>',
        'subnetIds' => ['<string>', ...],
        'tags' => ['<string>', ...],
        'type' => '<string>',
        'virtualClusterId' => '<string>',
    ],
]

Result Details

Members

endpoint

Type: Endpoint structure

This output displays information about a managed endpoint.

Errors

ValidationException:
There are invalid parameters in the client request.
ResourceNotFoundException:
The specified resource was not found.
InternalServerException:
This is an internal server exception.

DescribeSecurityConfiguration

$result = $client->describeSecurityConfiguration([/* ... */]);
$promise = $client->describeSecurityConfigurationAsync([/* ... */]);

Displays detailed information about a specified security configuration. Security configurations in Amazon EMR on EKS are templates for different security setups. You can use security configurations to configure the Lake Formation integration setup. You can also create a security configuration to re-use a security setup each time you create a virtual cluster.

Parameter Syntax

$result = $client->describeSecurityConfiguration([
    'id' => '<string>', // REQUIRED
]);

Parameter Details

Members

id

Required: Yes
Type: string

The ID of the security configuration.

Result Syntax

[
    'securityConfiguration' => [
        'arn' => '<string>',
        'createdAt' => <DateTime>,
        'createdBy' => '<string>',
        'id' => '<string>',
        'name' => '<string>',
        'securityConfigurationData' => [
            'authorizationConfiguration' => [
                'encryptionConfiguration' => [
                    'inTransitEncryptionConfiguration' => [
                        'tlsCertificateConfiguration' => [
                            'certificateProviderType' => 'PEM',
                            'privateCertificateSecretArn' => '<string>',
                            'publicCertificateSecretArn' => '<string>',
                        ],
                    ],
                ],
                'lakeFormationConfiguration' => [
                    'authorizedSessionTagValue' => '<string>',
                    'queryEngineRoleArn' => '<string>',
                    'secureNamespaceInfo' => [
                        'clusterId' => '<string>',
                        'namespace' => '<string>',
                    ],
                ],
            ],
        ],
        'tags' => ['<string>', ...],
    ],
]

Result Details

Members

securityConfiguration

Type: SecurityConfiguration structure

Details of the security configuration.

Errors

ValidationException:
There are invalid parameters in the client request.
ResourceNotFoundException:
The specified resource was not found.
InternalServerException:
This is an internal server exception.

DescribeVirtualCluster

$result = $client->describeVirtualCluster([/* ... */]);
$promise = $client->describeVirtualClusterAsync([/* ... */]);

Displays detailed information about a specified virtual cluster. Virtual cluster is a managed entity on Amazon EMR on EKS. You can create, describe, list and delete virtual clusters. They do not consume any additional resource in your system. A single virtual cluster maps to a single Kubernetes namespace. Given this relationship, you can model virtual clusters the same way you model Kubernetes namespaces to meet your requirements.

Parameter Syntax

$result = $client->describeVirtualCluster([
    'id' => '<string>', // REQUIRED
]);

Parameter Details

Members

id

Required: Yes
Type: string

The ID of the virtual cluster that will be described.

Result Syntax

[
    'virtualCluster' => [
        'arn' => '<string>',
        'containerProvider' => [
            'id' => '<string>',
            'info' => [
                'eksInfo' => [
                    'namespace' => '<string>',
                ],
            ],
            'type' => 'EKS',
        ],
        'createdAt' => <DateTime>,
        'id' => '<string>',
        'name' => '<string>',
        'securityConfigurationId' => '<string>',
        'state' => 'RUNNING|TERMINATING|TERMINATED|ARRESTED',
        'tags' => ['<string>', ...],
    ],
]

Result Details

Members

virtualCluster

Type: VirtualCluster structure

This output displays information about the specified virtual cluster.

Errors

ValidationException:
There are invalid parameters in the client request.
ResourceNotFoundException:
The specified resource was not found.
InternalServerException:
This is an internal server exception.

GetManagedEndpointSessionCredentials

$result = $client->getManagedEndpointSessionCredentials([/* ... */]);
$promise = $client->getManagedEndpointSessionCredentialsAsync([/* ... */]);

Generate a session token to connect to a managed endpoint.

Parameter Syntax

$result = $client->getManagedEndpointSessionCredentials([
    'clientToken' => '<string>',
    'credentialType' => '<string>', // REQUIRED
    'durationInSeconds' => <integer>,
    'endpointIdentifier' => '<string>', // REQUIRED
    'executionRoleArn' => '<string>', // REQUIRED
    'logContext' => '<string>',
    'virtualClusterIdentifier' => '<string>', // REQUIRED
]);

Parameter Details

Members

clientToken

Type: string

The client idempotency token of the job run request.

credentialType

Required: Yes
Type: string

Type of the token requested. Currently supported and default value of this field is “TOKEN.”

durationInSeconds

Type: int

Duration in seconds for which the session token is valid. The default duration is 15 minutes and the maximum is 12 hours.

endpointIdentifier

Required: Yes
Type: string

The ARN of the managed endpoint for which the request is submitted.

executionRoleArn

Required: Yes
Type: string

The IAM Execution Role ARN that will be used by the job run.

logContext

Type: string

String identifier used to separate sections of the execution logs uploaded to S3.

virtualClusterIdentifier

Required: Yes
Type: string

The ARN of the Virtual Cluster which the Managed Endpoint belongs to.

Result Syntax

[
    'credentials' => [
        'token' => '<string>',
    ],
    'expiresAt' => <DateTime>,
    'id' => '<string>',
]

Result Details

Members

credentials

Type: Credentials structure

The structure containing the session credentials.

expiresAt

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time when the session token will expire.

id

Type: string

The identifier of the session token returned.

Errors

ValidationException:
There are invalid parameters in the client request.
RequestThrottledException:
The request throttled.
ResourceNotFoundException:
The specified resource was not found.
InternalServerException:
This is an internal server exception.

ListJobRuns

$result = $client->listJobRuns([/* ... */]);
$promise = $client->listJobRunsAsync([/* ... */]);

Lists job runs based on a set of parameters. A job run is a unit of work, such as a Spark jar, PySpark script, or SparkSQL query, that you submit to Amazon EMR on EKS.

Parameter Syntax

$result = $client->listJobRuns([
    'createdAfter' => <integer || string || DateTime>,
    'createdBefore' => <integer || string || DateTime>,
    'maxResults' => <integer>,
    'name' => '<string>',
    'nextToken' => '<string>',
    'states' => ['<string>', ...],
    'virtualClusterId' => '<string>', // REQUIRED
]);

Parameter Details

Members

createdAfter

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time after which the job runs were submitted.

createdBefore

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time before which the job runs were submitted.

maxResults

Type: int

The maximum number of job runs that can be listed.

name

Type: string

The name of the job run.

nextToken

Type: string

The token for the next set of job runs to return.

states

Type: Array of strings

The states of the job run.

virtualClusterId

Required: Yes
Type: string

The ID of the virtual cluster for which to list the job run.

Result Syntax

[
    'jobRuns' => [
        [
            'arn' => '<string>',
            'clientToken' => '<string>',
            'configurationOverrides' => [
                'applicationConfiguration' => [
                    [
                        'classification' => '<string>',
                        'configurations' => [...], // RECURSIVE
                        'properties' => ['<string>', ...],
                    ],
                    // ...
                ],
                'monitoringConfiguration' => [
                    'cloudWatchMonitoringConfiguration' => [
                        'logGroupName' => '<string>',
                        'logStreamNamePrefix' => '<string>',
                    ],
                    'containerLogRotationConfiguration' => [
                        'maxFilesToKeep' => <integer>,
                        'rotationSize' => '<string>',
                    ],
                    'persistentAppUI' => 'ENABLED|DISABLED',
                    's3MonitoringConfiguration' => [
                        'logUri' => '<string>',
                    ],
                ],
            ],
            'createdAt' => <DateTime>,
            'createdBy' => '<string>',
            'executionRoleArn' => '<string>',
            'failureReason' => 'INTERNAL_ERROR|USER_ERROR|VALIDATION_ERROR|CLUSTER_UNAVAILABLE',
            'finishedAt' => <DateTime>,
            'id' => '<string>',
            'jobDriver' => [
                'sparkSqlJobDriver' => [
                    'entryPoint' => '<string>',
                    'sparkSqlParameters' => '<string>',
                ],
                'sparkSubmitJobDriver' => [
                    'entryPoint' => '<string>',
                    'entryPointArguments' => ['<string>', ...],
                    'sparkSubmitParameters' => '<string>',
                ],
            ],
            'name' => '<string>',
            'releaseLabel' => '<string>',
            'retryPolicyConfiguration' => [
                'maxAttempts' => <integer>,
            ],
            'retryPolicyExecution' => [
                'currentAttemptCount' => <integer>,
            ],
            'state' => 'PENDING|SUBMITTED|RUNNING|FAILED|CANCELLED|CANCEL_PENDING|COMPLETED',
            'stateDetails' => '<string>',
            'tags' => ['<string>', ...],
            'virtualClusterId' => '<string>',
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Members

jobRuns

Type: Array of JobRun structures

This output lists information about the specified job runs.

nextToken

Type: string

This output displays the token for the next set of job runs.

Errors

ValidationException:
There are invalid parameters in the client request.
InternalServerException:
This is an internal server exception.

ListJobTemplates

$result = $client->listJobTemplates([/* ... */]);
$promise = $client->listJobTemplatesAsync([/* ... */]);

Lists job templates based on a set of parameters. Job template stores values of StartJobRun API request in a template and can be used to start a job run. Job template allows two use cases: avoid repeating recurring StartJobRun API request values, enforcing certain values in StartJobRun API request.

Parameter Syntax

$result = $client->listJobTemplates([
    'createdAfter' => <integer || string || DateTime>,
    'createdBefore' => <integer || string || DateTime>,
    'maxResults' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Members

createdAfter

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time after which the job templates were created.

createdBefore

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time before which the job templates were created.

maxResults

Type: int

The maximum number of job templates that can be listed.

nextToken

Type: string

The token for the next set of job templates to return.

Result Syntax

[
    'nextToken' => '<string>',
    'templates' => [
        [
            'arn' => '<string>',
            'createdAt' => <DateTime>,
            'createdBy' => '<string>',
            'decryptionError' => '<string>',
            'id' => '<string>',
            'jobTemplateData' => [
                'configurationOverrides' => [
                    'applicationConfiguration' => [
                        [
                            'classification' => '<string>',
                            'configurations' => [...], // RECURSIVE
                            'properties' => ['<string>', ...],
                        ],
                        // ...
                    ],
                    'monitoringConfiguration' => [
                        'cloudWatchMonitoringConfiguration' => [
                            'logGroupName' => '<string>',
                            'logStreamNamePrefix' => '<string>',
                        ],
                        'persistentAppUI' => '<string>',
                        's3MonitoringConfiguration' => [
                            'logUri' => '<string>',
                        ],
                    ],
                ],
                'executionRoleArn' => '<string>',
                'jobDriver' => [
                    'sparkSqlJobDriver' => [
                        'entryPoint' => '<string>',
                        'sparkSqlParameters' => '<string>',
                    ],
                    'sparkSubmitJobDriver' => [
                        'entryPoint' => '<string>',
                        'entryPointArguments' => ['<string>', ...],
                        'sparkSubmitParameters' => '<string>',
                    ],
                ],
                'jobTags' => ['<string>', ...],
                'parameterConfiguration' => [
                    '<TemplateParameterName>' => [
                        'defaultValue' => '<string>',
                        'type' => 'NUMBER|STRING',
                    ],
                    // ...
                ],
                'releaseLabel' => '<string>',
            ],
            'kmsKeyArn' => '<string>',
            'name' => '<string>',
            'tags' => ['<string>', ...],
        ],
        // ...
    ],
]

Result Details

Members

nextToken

Type: string

This output displays the token for the next set of job templates.

templates

Type: Array of JobTemplate structures

This output lists information about the specified job templates.

Errors

ValidationException:
There are invalid parameters in the client request.
InternalServerException:
This is an internal server exception.

ListManagedEndpoints

$result = $client->listManagedEndpoints([/* ... */]);
$promise = $client->listManagedEndpointsAsync([/* ... */]);

Lists managed endpoints based on a set of parameters. A managed endpoint is a gateway that connects Amazon EMR Studio to Amazon EMR on EKS so that Amazon EMR Studio can communicate with your virtual cluster.

Parameter Syntax

$result = $client->listManagedEndpoints([
    'createdAfter' => <integer || string || DateTime>,
    'createdBefore' => <integer || string || DateTime>,
    'maxResults' => <integer>,
    'nextToken' => '<string>',
    'states' => ['<string>', ...],
    'types' => ['<string>', ...],
    'virtualClusterId' => '<string>', // REQUIRED
]);

Parameter Details

Members

createdAfter

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time after which the endpoints are created.

createdBefore

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time before which the endpoints are created.

maxResults

Type: int

The maximum number of managed endpoints that can be listed.

nextToken

Type: string

The token for the next set of managed endpoints to return.

states

Type: Array of strings

The states of the managed endpoints.

types

Type: Array of strings

The types of the managed endpoints.

virtualClusterId

Required: Yes
Type: string

The ID of the virtual cluster.

Result Syntax

[
    'endpoints' => [
        [
            'arn' => '<string>',
            'certificateArn' => '<string>',
            'certificateAuthority' => [
                'certificateArn' => '<string>',
                'certificateData' => '<string>',
            ],
            'configurationOverrides' => [
                'applicationConfiguration' => [
                    [
                        'classification' => '<string>',
                        'configurations' => [...], // RECURSIVE
                        'properties' => ['<string>', ...],
                    ],
                    // ...
                ],
                'monitoringConfiguration' => [
                    'cloudWatchMonitoringConfiguration' => [
                        'logGroupName' => '<string>',
                        'logStreamNamePrefix' => '<string>',
                    ],
                    'containerLogRotationConfiguration' => [
                        'maxFilesToKeep' => <integer>,
                        'rotationSize' => '<string>',
                    ],
                    'persistentAppUI' => 'ENABLED|DISABLED',
                    's3MonitoringConfiguration' => [
                        'logUri' => '<string>',
                    ],
                ],
            ],
            'createdAt' => <DateTime>,
            'executionRoleArn' => '<string>',
            'failureReason' => 'INTERNAL_ERROR|USER_ERROR|VALIDATION_ERROR|CLUSTER_UNAVAILABLE',
            'id' => '<string>',
            'name' => '<string>',
            'releaseLabel' => '<string>',
            'securityGroup' => '<string>',
            'serverUrl' => '<string>',
            'state' => 'CREATING|ACTIVE|TERMINATING|TERMINATED|TERMINATED_WITH_ERRORS',
            'stateDetails' => '<string>',
            'subnetIds' => ['<string>', ...],
            'tags' => ['<string>', ...],
            'type' => '<string>',
            'virtualClusterId' => '<string>',
        ],
        // ...
    ],
    'nextToken' => '<string>',
]

Result Details

Members

endpoints

Type: Array of Endpoint structures

The managed endpoints to be listed.

nextToken

Type: string

The token for the next set of endpoints to return.

Errors

ValidationException:
There are invalid parameters in the client request.
InternalServerException:
This is an internal server exception.

ListSecurityConfigurations

$result = $client->listSecurityConfigurations([/* ... */]);
$promise = $client->listSecurityConfigurationsAsync([/* ... */]);

Lists security configurations based on a set of parameters. Security configurations in Amazon EMR on EKS are templates for different security setups. You can use security configurations to configure the Lake Formation integration setup. You can also create a security configuration to re-use a security setup each time you create a virtual cluster.

Parameter Syntax

$result = $client->listSecurityConfigurations([
    'createdAfter' => <integer || string || DateTime>,
    'createdBefore' => <integer || string || DateTime>,
    'maxResults' => <integer>,
    'nextToken' => '<string>',
]);

Parameter Details

Members

createdAfter

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time after which the security configuration was created.

createdBefore

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time before which the security configuration was created.

maxResults

Type: int

The maximum number of security configurations the operation can list.

nextToken

Type: string

The token for the next set of security configurations to return.

Result Syntax

[
    'nextToken' => '<string>',
    'securityConfigurations' => [
        [
            'arn' => '<string>',
            'createdAt' => <DateTime>,
            'createdBy' => '<string>',
            'id' => '<string>',
            'name' => '<string>',
            'securityConfigurationData' => [
                'authorizationConfiguration' => [
                    'encryptionConfiguration' => [
                        'inTransitEncryptionConfiguration' => [
                            'tlsCertificateConfiguration' => [
                                'certificateProviderType' => 'PEM',
                                'privateCertificateSecretArn' => '<string>',
                                'publicCertificateSecretArn' => '<string>',
                            ],
                        ],
                    ],
                    'lakeFormationConfiguration' => [
                        'authorizedSessionTagValue' => '<string>',
                        'queryEngineRoleArn' => '<string>',
                        'secureNamespaceInfo' => [
                            'clusterId' => '<string>',
                            'namespace' => '<string>',
                        ],
                    ],
                ],
            ],
            'tags' => ['<string>', ...],
        ],
        // ...
    ],
]

Result Details

Members

nextToken

Type: string

The token for the next set of security configurations to return.

securityConfigurations

Type: Array of SecurityConfiguration structures

The list of returned security configurations.

Errors

ValidationException:
There are invalid parameters in the client request.
InternalServerException:
This is an internal server exception.

ListTagsForResource

$result = $client->listTagsForResource([/* ... */]);
$promise = $client->listTagsForResourceAsync([/* ... */]);

Lists the tags assigned to the resources.

Parameter Syntax

$result = $client->listTagsForResource([
    'resourceArn' => '<string>', // REQUIRED
]);

Parameter Details

Members

resourceArn

Required: Yes
Type: string

The ARN of tagged resources.

Result Syntax

[
    'tags' => ['<string>', ...],
]

Result Details

Members

tags

Type: Associative array of custom strings keys (String128) to strings

The tags assigned to resources.

Errors

InternalServerException:
This is an internal server exception.
ValidationException:
There are invalid parameters in the client request.
ResourceNotFoundException:
The specified resource was not found.

ListVirtualClusters

$result = $client->listVirtualClusters([/* ... */]);
$promise = $client->listVirtualClustersAsync([/* ... */]);

Lists information about the specified virtual cluster. Virtual cluster is a managed entity on Amazon EMR on EKS. You can create, describe, list and delete virtual clusters. They do not consume any additional resource in your system. A single virtual cluster maps to a single Kubernetes namespace. Given this relationship, you can model virtual clusters the same way you model Kubernetes namespaces to meet your requirements.

Parameter Syntax

$result = $client->listVirtualClusters([
    'containerProviderId' => '<string>',
    'containerProviderType' => 'EKS',
    'createdAfter' => <integer || string || DateTime>,
    'createdBefore' => <integer || string || DateTime>,
    'eksAccessEntryIntegrated' => true || false,
    'maxResults' => <integer>,
    'nextToken' => '<string>',
    'states' => ['<string>', ...],
]);

Parameter Details

Members

containerProviderId

Type: string

The container provider ID of the virtual cluster.

containerProviderType

Type: string

The container provider type of the virtual cluster. Amazon EKS is the only supported type as of now.

createdAfter

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time after which the virtual clusters are created.

createdBefore

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time before which the virtual clusters are created.

eksAccessEntryIntegrated

Type: boolean

Optional Boolean that specifies whether the operation should return the virtual clusters that have the access entry integration enabled or disabled. If not specified, the operation returns all applicable virtual clusters.

maxResults

Type: int

The maximum number of virtual clusters that can be listed.

nextToken

Type: string

The token for the next set of virtual clusters to return.

states

Type: Array of strings

The states of the requested virtual clusters.

Result Syntax

[
    'nextToken' => '<string>',
    'virtualClusters' => [
        [
            'arn' => '<string>',
            'containerProvider' => [
                'id' => '<string>',
                'info' => [
                    'eksInfo' => [
                        'namespace' => '<string>',
                    ],
                ],
                'type' => 'EKS',
            ],
            'createdAt' => <DateTime>,
            'id' => '<string>',
            'name' => '<string>',
            'securityConfigurationId' => '<string>',
            'state' => 'RUNNING|TERMINATING|TERMINATED|ARRESTED',
            'tags' => ['<string>', ...],
        ],
        // ...
    ],
]

Result Details

Members

nextToken

Type: string

This output displays the token for the next set of virtual clusters.

virtualClusters

Type: Array of VirtualCluster structures

This output lists the specified virtual clusters.

Errors

ValidationException:
There are invalid parameters in the client request.
InternalServerException:
This is an internal server exception.

StartJobRun

$result = $client->startJobRun([/* ... */]);
$promise = $client->startJobRunAsync([/* ... */]);

Starts a job run. A job run is a unit of work, such as a Spark jar, PySpark script, or SparkSQL query, that you submit to Amazon EMR on EKS.

Parameter Syntax

$result = $client->startJobRun([
    'clientToken' => '<string>', // REQUIRED
    'configurationOverrides' => [
        'applicationConfiguration' => [
            [
                'classification' => '<string>', // REQUIRED
                'configurations' => [...], // RECURSIVE
                'properties' => ['<string>', ...],
            ],
            // ...
        ],
        'monitoringConfiguration' => [
            'cloudWatchMonitoringConfiguration' => [
                'logGroupName' => '<string>', // REQUIRED
                'logStreamNamePrefix' => '<string>',
            ],
            'containerLogRotationConfiguration' => [
                'maxFilesToKeep' => <integer>, // REQUIRED
                'rotationSize' => '<string>', // REQUIRED
            ],
            'persistentAppUI' => 'ENABLED|DISABLED',
            's3MonitoringConfiguration' => [
                'logUri' => '<string>', // REQUIRED
            ],
        ],
    ],
    'executionRoleArn' => '<string>',
    'jobDriver' => [
        'sparkSqlJobDriver' => [
            'entryPoint' => '<string>',
            'sparkSqlParameters' => '<string>',
        ],
        'sparkSubmitJobDriver' => [
            'entryPoint' => '<string>', // REQUIRED
            'entryPointArguments' => ['<string>', ...],
            'sparkSubmitParameters' => '<string>',
        ],
    ],
    'jobTemplateId' => '<string>',
    'jobTemplateParameters' => ['<string>', ...],
    'name' => '<string>',
    'releaseLabel' => '<string>',
    'retryPolicyConfiguration' => [
        'maxAttempts' => <integer>, // REQUIRED
    ],
    'tags' => ['<string>', ...],
    'virtualClusterId' => '<string>', // REQUIRED
]);

Parameter Details

Members

clientToken

Required: Yes
Type: string

The client idempotency token of the job run request.

configurationOverrides

Type: ConfigurationOverrides structure

The configuration overrides for the job run.

executionRoleArn

Type: string

The execution role ARN for the job run.

jobDriver

Type: JobDriver structure

The job driver for the job run.

jobTemplateId

Type: string

The job template ID to be used to start the job run.

jobTemplateParameters

Type: Associative array of custom strings keys (TemplateParameterName) to strings

The values of job template parameters to start a job run.

name

Type: string

The name of the job run.

releaseLabel

Type: string

The Amazon EMR release version to use for the job run.

retryPolicyConfiguration

Type: RetryPolicyConfiguration structure

The retry policy configuration for the job run.

tags

Type: Associative array of custom strings keys (String128) to strings

The tags assigned to job runs.

virtualClusterId

Required: Yes
Type: string

The virtual cluster ID for which the job run request is submitted.

Result Syntax

[
    'arn' => '<string>',
    'id' => '<string>',
    'name' => '<string>',
    'virtualClusterId' => '<string>',
]

Result Details

Members

arn

Type: string

This output lists the ARN of job run.

id

Type: string

This output displays the started job run ID.

name

Type: string

This output displays the name of the started job run.

virtualClusterId

Type: string

This output displays the virtual cluster ID for which the job run was submitted.

Errors

ValidationException:
There are invalid parameters in the client request.
ResourceNotFoundException:
The specified resource was not found.
InternalServerException:
This is an internal server exception.

TagResource

$result = $client->tagResource([/* ... */]);
$promise = $client->tagResourceAsync([/* ... */]);

Assigns tags to resources. A tag is a label that you assign to an Amazon Web Services resource. Each tag consists of a key and an optional value, both of which you define. Tags enable you to categorize your Amazon Web Services resources by attributes such as purpose, owner, or environment. When you have many resources of the same type, you can quickly identify a specific resource based on the tags you've assigned to it. For example, you can define a set of tags for your Amazon EMR on EKS clusters to help you track each cluster's owner and stack level. We recommend that you devise a consistent set of tag keys for each resource type. You can then search and filter the resources based on the tags that you add.

Parameter Syntax

$result = $client->tagResource([
    'resourceArn' => '<string>', // REQUIRED
    'tags' => ['<string>', ...], // REQUIRED
]);

Parameter Details

Members

resourceArn

Required: Yes
Type: string

The ARN of resources.

tags

Required: Yes
Type: Associative array of custom strings keys (String128) to strings

The tags assigned to resources.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

InternalServerException:
This is an internal server exception.
ValidationException:
There are invalid parameters in the client request.
ResourceNotFoundException:
The specified resource was not found.

UntagResource

$result = $client->untagResource([/* ... */]);
$promise = $client->untagResourceAsync([/* ... */]);

Removes tags from resources.

Parameter Syntax

$result = $client->untagResource([
    'resourceArn' => '<string>', // REQUIRED
    'tagKeys' => ['<string>', ...], // REQUIRED
]);

Parameter Details

Members

resourceArn

Required: Yes
Type: string

The ARN of resources.

tagKeys

Required: Yes
Type: Array of strings

The tag keys of the resources.

Result Syntax

[]

Result Details

The results for this operation are always empty.

Errors

InternalServerException:
This is an internal server exception.
ValidationException:
There are invalid parameters in the client request.
ResourceNotFoundException:
The specified resource was not found.

Shapes

AuthorizationConfiguration

Description

Authorization-related configuration inputs for the security configuration.

Members

encryptionConfiguration

Type: EncryptionConfiguration structure

Encryption-related configuration input for the security configuration.

lakeFormationConfiguration

Type: LakeFormationConfiguration structure

Lake Formation related configuration inputs for the security configuration.

Certificate

Description

The entity representing certificate data generated for managed endpoint.

Members

certificateArn

Type: string

The ARN of the certificate generated for managed endpoint.

certificateData

Type: string

The base64 encoded PEM certificate data generated for managed endpoint.

CloudWatchMonitoringConfiguration

Description

A configuration for CloudWatch monitoring. You can configure your jobs to send log information to CloudWatch Logs.

Members

logGroupName

Required: Yes
Type: string

The name of the log group for log publishing.

logStreamNamePrefix

Type: string

The specified name prefix for log streams.

Configuration

Description

A configuration specification to be used when provisioning virtual clusters, which can include configurations for applications and software bundled with Amazon EMR on EKS. A configuration consists of a classification, properties, and optional nested configurations. A classification refers to an application-specific configuration file. Properties are the settings you want to change in that file.

Members

classification

Required: Yes
Type: string

The classification within a configuration.

configurations

Type: Array of Configuration structures

A list of additional configurations to apply within a configuration object.

properties

Type: Associative array of custom strings keys (String1024) to strings

A set of properties specified within a configuration classification.

ConfigurationOverrides

Description

A configuration specification to be used to override existing configurations.

Members

applicationConfiguration

Type: Array of Configuration structures

The configurations for the application running by the job run.

monitoringConfiguration

Type: MonitoringConfiguration structure

The configurations for monitoring.

ContainerInfo

Description

The information about the container used for a job run or a managed endpoint.

Members

eksInfo

Type: EksInfo structure

The information about the Amazon EKS cluster.

ContainerLogRotationConfiguration

Description

The settings for container log rotation.

Members

maxFilesToKeep

Required: Yes
Type: int

The number of files to keep in container after rotation.

rotationSize

Required: Yes
Type: string

The file size at which to rotate logs. Minimum of 2KB, Maximum of 2GB.

ContainerProvider

Description

The information about the container provider.

Members

id

Required: Yes
Type: string

The ID of the container cluster.

info

Type: ContainerInfo structure

The information about the container cluster.

type

Required: Yes
Type: string

The type of the container provider. Amazon EKS is the only supported type as of now.

Credentials

Description

The structure containing the session token being returned.

Members

token

Type: string

The actual session token being returned.

EKSRequestThrottledException

Description

The request exceeded the Amazon EKS API operation limits.

Members

message

Type: string

EksInfo

Description

The information about the Amazon EKS cluster.

Members

namespace

Type: string

The namespaces of the Amazon EKS cluster.

EncryptionConfiguration

Description

Configurations related to encryption for the security configuration.

Members

inTransitEncryptionConfiguration

Type: InTransitEncryptionConfiguration structure

In-transit encryption-related input for the security configuration.

Endpoint

Description

This entity represents the endpoint that is managed by Amazon EMR on EKS.

Members

arn

Type: string

The ARN of the endpoint.

certificateArn

Type: string

The certificate ARN of the endpoint. This field is under deprecation and will be removed in future.

certificateAuthority

Type: Certificate structure

The certificate generated by emr control plane on customer behalf to secure the managed endpoint.

configurationOverrides

Type: ConfigurationOverrides structure

The configuration settings that are used to override existing configurations for endpoints.

createdAt

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time when the endpoint was created.

executionRoleArn

Type: string

The execution role ARN of the endpoint.

failureReason

Type: string

The reasons why the endpoint has failed.

id

Type: string

The ID of the endpoint.

name

Type: string

The name of the endpoint.

releaseLabel

Type: string

The EMR release version to be used for the endpoint.

securityGroup

Type: string

The security group configuration of the endpoint.

serverUrl

Type: string

The server URL of the endpoint.

state

Type: string

The state of the endpoint.

stateDetails

Type: string

Additional details of the endpoint state.

subnetIds

Type: Array of strings

The subnet IDs of the endpoint.

tags

Type: Associative array of custom strings keys (String128) to strings

The tags of the endpoint.

type

Type: string

The type of the endpoint.

virtualClusterId

Type: string

The ID of the endpoint's virtual cluster.

InTransitEncryptionConfiguration

Description

Configurations related to in-transit encryption for the security configuration.

Members

tlsCertificateConfiguration

Type: TLSCertificateConfiguration structure

TLS certificate-related configuration input for the security configuration.

InternalServerException

Description

This is an internal server exception.

Members

message

Type: string

JobDriver

Description

Specify the driver that the job runs on. Exactly one of the two available job drivers is required, either sparkSqlJobDriver or sparkSubmitJobDriver.

Members

sparkSqlJobDriver

Type: SparkSqlJobDriver structure

The job driver for job type.

sparkSubmitJobDriver

Type: SparkSubmitJobDriver structure

The job driver parameters specified for spark submit.

JobRun

Description

This entity describes a job run. A job run is a unit of work, such as a Spark jar, PySpark script, or SparkSQL query, that you submit to Amazon EMR on EKS.

Members

arn

Type: string

The ARN of job run.

clientToken

Type: string

The client token used to start a job run.

configurationOverrides

Type: ConfigurationOverrides structure

The configuration settings that are used to override default configuration.

createdAt

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time when the job run was created.

createdBy

Type: string

The user who created the job run.

executionRoleArn

Type: string

The execution role ARN of the job run.

failureReason

Type: string

The reasons why the job run has failed.

finishedAt

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time when the job run has finished.

id

Type: string

The ID of the job run.

jobDriver

Type: JobDriver structure

Parameters of job driver for the job run.

name

Type: string

The name of the job run.

releaseLabel

Type: string

The release version of Amazon EMR.

retryPolicyConfiguration

Type: RetryPolicyConfiguration structure

The configuration of the retry policy that the job runs on.

retryPolicyExecution

Type: RetryPolicyExecution structure

The current status of the retry policy executed on the job.

state

Type: string

The state of the job run.

stateDetails

Type: string

Additional details of the job run state.

tags

Type: Associative array of custom strings keys (String128) to strings

The assigned tags of the job run.

virtualClusterId

Type: string

The ID of the job run's virtual cluster.

JobTemplate

Description

This entity describes a job template. Job template stores values of StartJobRun API request in a template and can be used to start a job run. Job template allows two use cases: avoid repeating recurring StartJobRun API request values, enforcing certain values in StartJobRun API request.

Members

arn

Type: string

The ARN of the job template.

createdAt

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time when the job template was created.

createdBy

Type: string

The user who created the job template.

decryptionError

Type: string

The error message in case the decryption of job template fails.

id

Type: string

The ID of the job template.

jobTemplateData

Required: Yes
Type: JobTemplateData structure

The job template data which holds values of StartJobRun API request.

kmsKeyArn

Type: string

The KMS key ARN used to encrypt the job template.

name

Type: string

The name of the job template.

tags

Type: Associative array of custom strings keys (String128) to strings

The tags assigned to the job template.

JobTemplateData

Description

The values of StartJobRun API requests used in job runs started using the job template.

Members

configurationOverrides

Type: ParametricConfigurationOverrides structure

The configuration settings that are used to override defaults configuration.

executionRoleArn

Required: Yes
Type: string

The execution role ARN of the job run.

jobDriver

Required: Yes
Type: JobDriver structure

Specify the driver that the job runs on. Exactly one of the two available job drivers is required, either sparkSqlJobDriver or sparkSubmitJobDriver.

jobTags

Type: Associative array of custom strings keys (String128) to strings

The tags assigned to jobs started using the job template.

parameterConfiguration

Type: Associative array of custom strings keys (TemplateParameterName) to TemplateParameterConfiguration structures

The configuration of parameters existing in the job template.

releaseLabel

Required: Yes
Type: string

The release version of Amazon EMR.

LakeFormationConfiguration

Description

Lake Formation related configuration inputs for the security configuration.

Members

authorizedSessionTagValue

Type: string

The session tag to authorize Amazon EMR on EKS for API calls to Lake Formation.

queryEngineRoleArn

Type: string

The query engine IAM role ARN that is tied to the secure Spark job. The QueryEngine role assumes the JobExecutionRole to execute all the Lake Formation calls.

secureNamespaceInfo

Type: SecureNamespaceInfo structure

The namespace input of the system job.

MonitoringConfiguration

Description

Configuration setting for monitoring.

Members

cloudWatchMonitoringConfiguration

Type: CloudWatchMonitoringConfiguration structure

Monitoring configurations for CloudWatch.

containerLogRotationConfiguration

Type: ContainerLogRotationConfiguration structure

Enable or disable container log rotation.

persistentAppUI

Type: string

Monitoring configurations for the persistent application UI.

s3MonitoringConfiguration

Type: S3MonitoringConfiguration structure

Amazon S3 configuration for monitoring log publishing.

ParametricCloudWatchMonitoringConfiguration

Description

A configuration for CloudWatch monitoring. You can configure your jobs to send log information to CloudWatch Logs. This data type allows job template parameters to be specified within.

Members

logGroupName

Type: string

The name of the log group for log publishing.

logStreamNamePrefix

Type: string

The specified name prefix for log streams.

ParametricConfigurationOverrides

Description

A configuration specification to be used to override existing configurations. This data type allows job template parameters to be specified within.

Members

applicationConfiguration

Type: Array of Configuration structures

The configurations for the application running by the job run.

monitoringConfiguration

Type: ParametricMonitoringConfiguration structure

The configurations for monitoring.

ParametricMonitoringConfiguration

Description

Configuration setting for monitoring. This data type allows job template parameters to be specified within.

Members

cloudWatchMonitoringConfiguration

Type: ParametricCloudWatchMonitoringConfiguration structure

Monitoring configurations for CloudWatch.

persistentAppUI

Type: string

Monitoring configurations for the persistent application UI.

s3MonitoringConfiguration

Type: ParametricS3MonitoringConfiguration structure

Amazon S3 configuration for monitoring log publishing.

ParametricS3MonitoringConfiguration

Description

Amazon S3 configuration for monitoring log publishing. You can configure your jobs to send log information to Amazon S3. This data type allows job template parameters to be specified within.

Members

logUri

Type: string

Amazon S3 destination URI for log publishing.

RequestThrottledException

Description

The request throttled.

Members

message

Type: string

ResourceNotFoundException

Description

The specified resource was not found.

Members

message

Type: string

RetryPolicyConfiguration

Description

The configuration of the retry policy that the job runs on.

Members

maxAttempts

Required: Yes
Type: int

The maximum number of attempts on the job's driver.

RetryPolicyExecution

Description

The current status of the retry policy executed on the job.

Members

currentAttemptCount

Required: Yes
Type: int

The current number of attempts made on the driver of the job.

S3MonitoringConfiguration

Description

Amazon S3 configuration for monitoring log publishing. You can configure your jobs to send log information to Amazon S3.

Members

logUri

Required: Yes
Type: string

Amazon S3 destination URI for log publishing.

SecureNamespaceInfo

Description

Namespace inputs for the system job.

Members

clusterId

Type: string

The ID of the Amazon EKS cluster where Amazon EMR on EKS jobs run.

namespace

Type: string

The namespace of the Amazon EKS cluster where the system jobs run.

SecurityConfiguration

Description

Inputs related to the security configuration. Security configurations in Amazon EMR on EKS are templates for different security setups. You can use security configurations to configure the Lake Formation integration setup. You can also create a security configuration to re-use a security setup each time you create a virtual cluster.

Members

arn

Type: string

The ARN (Amazon Resource Name) of the security configuration.

createdAt

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time that the job run was created.

createdBy

Type: string

The user who created the job run.

id

Type: string

The ID of the security configuration.

name

Type: string

The name of the security configuration.

securityConfigurationData

Type: SecurityConfigurationData structure

Security configuration inputs for the request.

tags

Type: Associative array of custom strings keys (String128) to strings

The tags to assign to the security configuration.

SecurityConfigurationData

Description

Configurations related to the security configuration for the request.

Members

authorizationConfiguration

Type: AuthorizationConfiguration structure

Authorization-related configuration input for the security configuration.

SparkSqlJobDriver

Description

The job driver for job type.

Members

entryPoint

Type: string

The SQL file to be executed.

sparkSqlParameters

Type: string

The Spark parameters to be included in the Spark SQL command.

SparkSubmitJobDriver

Description

The information about job driver for Spark submit.

Members

entryPoint

Required: Yes
Type: string

The entry point of job application.

entryPointArguments

Type: Array of strings

The arguments for job application.

sparkSubmitParameters

Type: string

The Spark submit parameters that are used for job runs.

TLSCertificateConfiguration

Description

Configurations related to the TLS certificate for the security configuration.

Members

certificateProviderType

Type: string

The TLS certificate type. Acceptable values: PEM or Custom.

privateCertificateSecretArn

Type: string

Secrets Manager ARN that contains the private TLS certificate contents, used for communication between the user job and the system job.

publicCertificateSecretArn

Type: string

Secrets Manager ARN that contains the public TLS certificate contents, used for communication between the user job and the system job.

TemplateParameterConfiguration

Description

The configuration of a job template parameter.

Members

defaultValue

Type: string

The default value for the job template parameter.

type

Type: string

The type of the job template parameter. Allowed values are: ‘STRING’, ‘NUMBER’.

ValidationException

Description

There are invalid parameters in the client request.

Members

message

Type: string

VirtualCluster

Description

This entity describes a virtual cluster. A virtual cluster is a Kubernetes namespace that Amazon EMR is registered with. Amazon EMR uses virtual clusters to run jobs and host endpoints. Multiple virtual clusters can be backed by the same physical cluster. However, each virtual cluster maps to one namespace on an Amazon EKS cluster. Virtual clusters do not create any active resources that contribute to your bill or that require lifecycle management outside the service.

Members

arn

Type: string

The ARN of the virtual cluster.

containerProvider

Type: ContainerProvider structure

The container provider of the virtual cluster.

createdAt

Type: timestamp (string|DateTime or anything parsable by strtotime)

The date and time when the virtual cluster is created.

id

Type: string

The ID of the virtual cluster.

name

Type: string

The name of the virtual cluster.

securityConfigurationId

Type: string

The ID of the security configuration.

state

Type: string

The state of the virtual cluster.

tags

Type: Associative array of custom strings keys (String128) to strings

The assigned tags of the virtual cluster.

Amazon EMR Containers 2020-10-01

Operation Summary

Paginators

Operations

CancelJobRun

Parameter Syntax

Parameter Details

Members

Result Syntax

Result Details

Members

Errors

CreateJobTemplate

Parameter Syntax

Parameter Details

Members

Result Syntax

Result Details

Members

Errors

CreateManagedEndpoint

Parameter Syntax

Parameter Details

Members

Result Syntax

Result Details

Members

Errors

CreateSecurityConfiguration

Parameter Syntax

Parameter Details

Members

Result Syntax

Result Details

Members

Errors

CreateVirtualCluster

Parameter Syntax

Parameter Details

Members

Result Syntax

Result Details

Members

Errors

DeleteJobTemplate

Parameter Syntax

Parameter Details

Members

Result Syntax

Result Details

Members

Errors

DeleteManagedEndpoint

Parameter Syntax

Parameter Details

Members

Result Syntax

Result Details

Members

Errors

DeleteVirtualCluster

Parameter Syntax

Parameter Details

Members

Result Syntax

Result Details

Members

Errors

DescribeJobRun

Parameter Syntax

Parameter Details

Members

Result Syntax

Result Details

Members

Errors

DescribeJobTemplate

Parameter Syntax

Parameter Details

Members