Request Syntax Request Parameters Response Syntax Response Elements Errors Examples See Also

UpdateEndpointGroup

Update an endpoint group. A resource must be valid and active when you add it as an endpoint.

Request Syntax


{
   "EndpointConfigurations": [ 
      { 
         "AttachmentArn": "string",
         "ClientIPPreservationEnabled": boolean,
         "EndpointId": "string",
         "Weight": number
      }
   ],
   "EndpointGroupArn": "string",
   "HealthCheckIntervalSeconds": number,
   "HealthCheckPath": "string",
   "HealthCheckPort": number,
   "HealthCheckProtocol": "string",
   "PortOverrides": [ 
      { 
         "EndpointPort": number,
         "ListenerPort": number
      }
   ],
   "ThresholdCount": number,
   "TrafficDialPercentage": number
}

Request Parameters

For information about the parameters that are common to all actions, see Common Parameters.

The request accepts the following data in JSON format.

EndpointConfigurations

The list of endpoint objects. A resource must be valid and active when you add it as an endpoint.

Type: Array of EndpointConfiguration objects

Array Members: Minimum number of 0 items. Maximum number of 10 items.

Required: No

EndpointGroupArn

The Amazon Resource Name (ARN) of the endpoint group.

Type: String

Length Constraints: Maximum length of 255.

Required: Yes

HealthCheckIntervalSeconds

The time—10 seconds or 30 seconds—between each health check for an endpoint. The default value is 30.

Type: Integer

Valid Range: Minimum value of 10. Maximum value of 30.

Required: No

HealthCheckPath

If the protocol is HTTP/S, then this specifies the path that is the destination for health check targets. The default value is slash (/).

Type: String

Length Constraints: Maximum length of 255.

Pattern: ^/[-a-zA-Z0-9@:%_\\+.~#?&/=]*$

Required: No

HealthCheckPort

The port that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default port is the listener port that this endpoint group is associated with. If the listener port is a list of ports, Global Accelerator uses the first port in the list.

Type: Integer

Valid Range: Minimum value of 1. Maximum value of 65535.

Required: No

HealthCheckProtocol

The protocol that AWS Global Accelerator uses to check the health of endpoints that are part of this endpoint group. The default value is TCP.

Type: String

Valid Values: TCP | HTTP | HTTPS

Required: No

PortOverrides

Override specific listener ports used to route traffic to endpoints that are part of this endpoint group. For example, you can create a port override in which the listener receives user traffic on ports 80 and 443, but your accelerator routes that traffic to ports 1080 and 1443, respectively, on the endpoints.

For more information, see Overriding listener ports in the AWS Global Accelerator Developer Guide.

Type: Array of PortOverride objects

Array Members: Minimum number of 0 items. Maximum number of 10 items.

Required: No

ThresholdCount

The number of consecutive health checks required to set the state of a healthy endpoint to unhealthy, or to set an unhealthy endpoint to healthy. The default value is 3.

Type: Integer

Valid Range: Minimum value of 1. Maximum value of 10.

Required: No

TrafficDialPercentage

The percentage of traffic to send to an AWS Region. Additional traffic is distributed to other endpoint groups for this listener.

Use this action to increase (dial up) or decrease (dial down) traffic to a specific Region. The percentage is applied to the traffic that would otherwise have been routed to the Region based on optimal routing.

The default value is 100.

Type: Float

Valid Range: Minimum value of 0. Maximum value of 100.

Required: No

Response Syntax


{
   "EndpointGroup": { 
      "EndpointDescriptions": [ 
         { 
            "ClientIPPreservationEnabled": boolean,
            "EndpointId": "string",
            "HealthReason": "string",
            "HealthState": "string",
            "Weight": number
         }
      ],
      "EndpointGroupArn": "string",
      "EndpointGroupRegion": "string",
      "HealthCheckIntervalSeconds": number,
      "HealthCheckPath": "string",
      "HealthCheckPort": number,
      "HealthCheckProtocol": "string",
      "PortOverrides": [ 
         { 
            "EndpointPort": number,
            "ListenerPort": number
         }
      ],
      "ThresholdCount": number,
      "TrafficDialPercentage": number
   }
}

Response Elements

If the action is successful, the service sends back an HTTP 200 response.

The following data is returned in JSON format by the service.

EndpointGroup

The information about the endpoint group that was updated.

Type: EndpointGroup object

Errors

For information about the errors that are common to all actions, see Common Errors.

AccessDeniedException

You don't have access permission.

HTTP Status Code: 400

EndpointGroupNotFoundException

The endpoint group that you specified doesn't exist.

HTTP Status Code: 400

InternalServiceErrorException

There was an internal error for AWS Global Accelerator.

HTTP Status Code: 400

InvalidArgumentException

An argument that you specified is invalid.

HTTP Status Code: 400

LimitExceededException

Processing your request would cause you to exceed an AWS Global Accelerator limit.

HTTP Status Code: 400

Examples

Update an endpoint group

The following is an example of adding endpoints to an endpoint group, and the response.


aws globalaccelerator update-endpoint-group
    --endpoint-group-arn arn:aws:globalaccelerator::012345678901:accelerator/1234abcd-abcd-1234-abcd-1234abcdefgh/listener/6789vxyz/endpoint-group/ab88888example 
    --port-overrides ListenerPort=443,EndpointPort=1443
    --endpoint-configurations 
      EndpointId=i-1234567890abcdef0,Weight=128 
      EndpointId=arn:aws:elasticloadbalancing:us-east-1:000123456789:loadbalancer/app/ALBTesting/alb01234567890xyz,Weight=128 
      EndpointId=arn:aws:elasticloadbalancing:us-east-1:000123456789:loadbalancer/net/NLBTesting/alb01234567890qrs,Weight=128


{
    "EndpointGroup": {
        "TrafficDialPercentage": 100.0, 
        "EndpointDescriptions": [
           {
              "Weight": 128, 
              "EndpointId": "i-1234567890abcdef0"
           },
           {
              "Weight": 128, 
              "EndpointId": "arn:aws:elasticloadbalancing:us-east-1:000123456789:loadbalancer/app/ALBTesting/alb01234567890xyz"
           },
           {
              "Weight": 128, 
              "EndpointId": "arn:aws:elasticloadbalancing:us-east-1:000123456789:loadbalancer/net/NLBTesting/alb01234567890qrs"
           }
        ],
        "PortOverrides": [
            {
                "EndpointPort": 1443,
                "ListenerPort": 443
            }
        ],
        "EndpointGroupArn": "arn:aws:globalaccelerator::012345678901:accelerator/1234abcd-abcd-1234-abcd-1234abcdefgh/listener/6789vxyz-vxyz-6789-vxyz-6789lmnopqrs/endpoint-group/4321abcd-abcd-4321-abcd-4321abcdefg", 
        "EndpointGroupRegion": "us-east-1"
    }
}