Menggunakan AWS SDKuntuk mengonfigurasi penskalaan otomatis pada tabel Amazon DynamoDB

Selain menggunakan AWS Management Console dan AWS Command Line Interface (AWS CLI), Anda dapat menulis aplikasi yang berinteraksi dengan penskalaan otomatis Amazon DynamoDB. Bagian ini berisi dua program Java yang dapat Anda gunakan untuk menguji fungsi ini:

• EnableDynamoDBAutoscaling.java

• DisableDynamoDBAutoscaling.java

Mengaktifkan Application Auto Scaling untuk suatu tabel

Program berikut menunjukkan contoh penyiapan kebijakan penskalaan otomatis untuk tabel DynamoDB (TestTable). Hal ini berjalan sebagai berikut:

• Program mendaftarkan unit kapasitas tulis sebagai target yang dapat diskalakan untuk TestTable. Kisaran untuk metrik ini adalah antara 5 dan 10 unit kapasitas tulis.

• Setelah target yang dapat diskalakan dibuat, program ini membangun konfigurasi pelacakan target. Kebijakan ini bertujuan untuk mempertahankan rasio target sebesar 50 persen antara kapasitas tulis yang dikonsumsi dan kapasitas tulis yang disediakan.

• Program ini kemudian membuat kebijakan penskalaan berdasarkan konfigurasi pelacakan target.

catatan

Saat menghapus tabel atau replika tabel global secara manual, Anda tidak secara otomatis menghapus target, kebijakan penskalaan, atau alarm terkait yang dapat diskalakan. CloudWatch

Java v2

import software.amazon.awssdk.regions.Region;
import software.amazon.awssdk.services.applicationautoscaling.ApplicationAutoScalingClient;
import software.amazon.awssdk.services.applicationautoscaling.model.ApplicationAutoScalingException;
import software.amazon.awssdk.services.applicationautoscaling.model.DescribeScalableTargetsRequest;
import software.amazon.awssdk.services.applicationautoscaling.model.DescribeScalableTargetsResponse;
import software.amazon.awssdk.services.applicationautoscaling.model.DescribeScalingPoliciesRequest;
import software.amazon.awssdk.services.applicationautoscaling.model.DescribeScalingPoliciesResponse;
import software.amazon.awssdk.services.applicationautoscaling.model.PolicyType;
import software.amazon.awssdk.services.applicationautoscaling.model.PredefinedMetricSpecification;
import software.amazon.awssdk.services.applicationautoscaling.model.PutScalingPolicyRequest;
import software.amazon.awssdk.services.applicationautoscaling.model.RegisterScalableTargetRequest;
import software.amazon.awssdk.services.applicationautoscaling.model.ScalingPolicy;
import software.amazon.awssdk.services.applicationautoscaling.model.ServiceNamespace;
import software.amazon.awssdk.services.applicationautoscaling.model.ScalableDimension;
import software.amazon.awssdk.services.applicationautoscaling.model.MetricType;
import software.amazon.awssdk.services.applicationautoscaling.model.TargetTrackingScalingPolicyConfiguration;
import java.util.List;

/**
 * Before running this Java V2 code example, set up your development environment, including your credentials.
 *
 * For more information, see the following documentation topic:
 *
 * https://docs.aws.amazon.com/sdk-for-java/latest/developer-guide/get-started.html
 */
public class EnableDynamoDBAutoscaling {
    public static void main(String[] args) {
        final String usage = """

            Usage:
               <tableId> <roleARN> <policyName>\s

            Where:
               tableId - The table Id value (for example, table/Music).
               roleARN - The ARN of the role that has ApplicationAutoScaling permissions.
               policyName - The name of the policy to create.
               
            """;

        if (args.length != 3) {
            System.out.println(usage);
            System.exit(1);
        }

        System.out.println("This example registers an Amazon DynamoDB table, which is the resource to scale.");
        String tableId = args[0];
        String roleARN = args[1];
        String policyName = args[2];
        ServiceNamespace ns = ServiceNamespace.DYNAMODB;
        ScalableDimension tableWCUs = ScalableDimension.DYNAMODB_TABLE_WRITE_CAPACITY_UNITS;
        ApplicationAutoScalingClient appAutoScalingClient = ApplicationAutoScalingClient.builder()
            .region(Region.US_EAST_1)
            .build();

        registerScalableTarget(appAutoScalingClient, tableId, roleARN, ns, tableWCUs);
        verifyTarget(appAutoScalingClient, tableId, ns, tableWCUs);
        configureScalingPolicy(appAutoScalingClient, tableId, ns, tableWCUs, policyName);
    }

    public static void registerScalableTarget(ApplicationAutoScalingClient appAutoScalingClient, String tableId, String roleARN, ServiceNamespace ns, ScalableDimension tableWCUs) {
        try {
            RegisterScalableTargetRequest targetRequest = RegisterScalableTargetRequest.builder()
                .serviceNamespace(ns)
                .scalableDimension(tableWCUs)
                .resourceId(tableId)
                .roleARN(roleARN)
                .minCapacity(5)
                .maxCapacity(10)
                .build();

            appAutoScalingClient.registerScalableTarget(targetRequest);
            System.out.println("You have registered " + tableId);

        } catch (ApplicationAutoScalingException e) {
            System.err.println(e.awsErrorDetails().errorMessage());
        }
    }

    // Verify that the target was created.
    public static void verifyTarget(ApplicationAutoScalingClient appAutoScalingClient, String tableId, ServiceNamespace ns, ScalableDimension tableWCUs) {
        DescribeScalableTargetsRequest dscRequest = DescribeScalableTargetsRequest.builder()
            .scalableDimension(tableWCUs)
            .serviceNamespace(ns)
            .resourceIds(tableId)
            .build();

        DescribeScalableTargetsResponse response = appAutoScalingClient.describeScalableTargets(dscRequest);
        System.out.println("DescribeScalableTargets result: ");
        System.out.println(response);
    }

    // Configure a scaling policy.
    public static void configureScalingPolicy(ApplicationAutoScalingClient appAutoScalingClient, String tableId, ServiceNamespace ns, ScalableDimension tableWCUs, String policyName) {
        // Check if the policy exists before creating a new one.
        DescribeScalingPoliciesResponse describeScalingPoliciesResponse = appAutoScalingClient.describeScalingPolicies(DescribeScalingPoliciesRequest.builder()
            .serviceNamespace(ns)
            .resourceId(tableId)
            .scalableDimension(tableWCUs)
            .build());

        if (!describeScalingPoliciesResponse.scalingPolicies().isEmpty()) {
            // If policies exist, consider updating an existing policy instead of creating a new one.
            System.out.println("Policy already exists. Consider updating it instead.");
            List<ScalingPolicy> polList = describeScalingPoliciesResponse.scalingPolicies();
            for (ScalingPolicy pol : polList) {
                System.out.println("Policy name:" +pol.policyName());
            }
        } else {
            // If no policies exist, proceed with creating a new policy.
            PredefinedMetricSpecification specification = PredefinedMetricSpecification.builder()
                .predefinedMetricType(MetricType.DYNAMO_DB_WRITE_CAPACITY_UTILIZATION)
                .build();

            TargetTrackingScalingPolicyConfiguration policyConfiguration = TargetTrackingScalingPolicyConfiguration.builder()
                .predefinedMetricSpecification(specification)
                .targetValue(50.0)
                .scaleInCooldown(60)
                .scaleOutCooldown(60)
                .build();

            PutScalingPolicyRequest putScalingPolicyRequest = PutScalingPolicyRequest.builder()
                .targetTrackingScalingPolicyConfiguration(policyConfiguration)
                .serviceNamespace(ns)
                .scalableDimension(tableWCUs)
                .resourceId(tableId)
                .policyName(policyName)
                .policyType(PolicyType.TARGET_TRACKING_SCALING)
                .build();

            try {
                appAutoScalingClient.putScalingPolicy(putScalingPolicyRequest);
                System.out.println("You have successfully created a scaling policy for an Application Auto Scaling scalable target");
            } catch (ApplicationAutoScalingException e) {
                System.err.println("Error: " + e.awsErrorDetails().errorMessage());
            }
        }
    }
}

Java v1

Program ini mengharuskan Anda memberikan Amazon Resource Name (ARN) untuk peran terkait layanan Application Auto Scaling yang valid. (Misalnya: arn:aws:iam::122517410325:role/AWSServiceRoleForApplicationAutoScaling_DynamoDBTable.) Dalam program berikut, ganti SERVICE_ROLE_ARN_GOES_HERE dengan yang sebenarnyaARN.

package com.amazonaws.codesamples.autoscaling;

import com.amazonaws.services.applicationautoscaling.AWSApplicationAutoScalingClient;
import com.amazonaws.services.applicationautoscaling.AWSApplicationAutoScalingClientBuilder;
import com.amazonaws.services.applicationautoscaling.model.DescribeScalableTargetsRequest;
import com.amazonaws.services.applicationautoscaling.model.DescribeScalableTargetsResult;
import com.amazonaws.services.applicationautoscaling.model.DescribeScalingPoliciesRequest;
import com.amazonaws.services.applicationautoscaling.model.DescribeScalingPoliciesResult;
import com.amazonaws.services.applicationautoscaling.model.MetricType;
import com.amazonaws.services.applicationautoscaling.model.PolicyType;
import com.amazonaws.services.applicationautoscaling.model.PredefinedMetricSpecification;
import com.amazonaws.services.applicationautoscaling.model.PutScalingPolicyRequest;
import com.amazonaws.services.applicationautoscaling.model.RegisterScalableTargetRequest;
import com.amazonaws.services.applicationautoscaling.model.ScalableDimension;
import com.amazonaws.services.applicationautoscaling.model.ServiceNamespace;
import com.amazonaws.services.applicationautoscaling.model.TargetTrackingScalingPolicyConfiguration;

public class EnableDynamoDBAutoscaling {

	static AWSApplicationAutoScalingClient aaClient = (AWSApplicationAutoScalingClient) AWSApplicationAutoScalingClientBuilder
			.standard().build();

	public static void main(String args[]) {

		ServiceNamespace ns = ServiceNamespace.Dynamodb;
		ScalableDimension tableWCUs = ScalableDimension.DynamodbTableWriteCapacityUnits;
		String resourceID = "table/TestTable";

		// Define the scalable target
		RegisterScalableTargetRequest rstRequest = new RegisterScalableTargetRequest()
				.withServiceNamespace(ns)
				.withResourceId(resourceID)
				.withScalableDimension(tableWCUs)
				.withMinCapacity(5)
				.withMaxCapacity(10)
				.withRoleARN("SERVICE_ROLE_ARN_GOES_HERE");

		try {
			aaClient.registerScalableTarget(rstRequest);
		} catch (Exception e) {
			System.err.println("Unable to register scalable target: ");
			System.err.println(e.getMessage());
		}

		// Verify that the target was created
		DescribeScalableTargetsRequest dscRequest = new DescribeScalableTargetsRequest()
				.withServiceNamespace(ns)
				.withScalableDimension(tableWCUs)
				.withResourceIds(resourceID);
		try {
			DescribeScalableTargetsResult dsaResult = aaClient.describeScalableTargets(dscRequest);
			System.out.println("DescribeScalableTargets result: ");
			System.out.println(dsaResult);
			System.out.println();
		} catch (Exception e) {
			System.err.println("Unable to describe scalable target: ");
			System.err.println(e.getMessage());
		}

		System.out.println();

		// Configure a scaling policy
		TargetTrackingScalingPolicyConfiguration targetTrackingScalingPolicyConfiguration = new TargetTrackingScalingPolicyConfiguration()
				.withPredefinedMetricSpecification(
						new PredefinedMetricSpecification()
								.withPredefinedMetricType(MetricType.DynamoDBWriteCapacityUtilization))
				.withTargetValue(50.0)
				.withScaleInCooldown(60)
				.withScaleOutCooldown(60);

		// Create the scaling policy, based on your configuration
		PutScalingPolicyRequest pspRequest = new PutScalingPolicyRequest()
				.withServiceNamespace(ns)
				.withScalableDimension(tableWCUs)
				.withResourceId(resourceID)
				.withPolicyName("MyScalingPolicy")
				.withPolicyType(PolicyType.TargetTrackingScaling)
				.withTargetTrackingScalingPolicyConfiguration(targetTrackingScalingPolicyConfiguration);

		try {
			aaClient.putScalingPolicy(pspRequest);
		} catch (Exception e) {
			System.err.println("Unable to put scaling policy: ");
			System.err.println(e.getMessage());
		}

		// Verify that the scaling policy was created
		DescribeScalingPoliciesRequest dspRequest = new DescribeScalingPoliciesRequest()
				.withServiceNamespace(ns)
				.withScalableDimension(tableWCUs)
				.withResourceId(resourceID);

		try {
			DescribeScalingPoliciesResult dspResult = aaClient.describeScalingPolicies(dspRequest);
			System.out.println("DescribeScalingPolicies result: ");
			System.out.println(dspResult);
		} catch (Exception e) {
			e.printStackTrace();
			System.err.println("Unable to describe scaling policy: ");
			System.err.println(e.getMessage());
		}

	}

}

Menonaktifkan Application Auto Scaling untuk suatu tabel

Program berikut membalikkan proses sebelumnya. Program akan menghapus kebijakan penskalaan otomatis dan kemudian membatalkan pendaftaran target yang dapat diskalakan.

Java v2

import software.amazon.awssdk.regions.Region;
import software.amazon.awssdk.services.applicationautoscaling.ApplicationAutoScalingClient;
import software.amazon.awssdk.services.applicationautoscaling.model.ApplicationAutoScalingException;
import software.amazon.awssdk.services.applicationautoscaling.model.DeleteScalingPolicyRequest;
import software.amazon.awssdk.services.applicationautoscaling.model.DeregisterScalableTargetRequest;
import software.amazon.awssdk.services.applicationautoscaling.model.DescribeScalableTargetsRequest;
import software.amazon.awssdk.services.applicationautoscaling.model.DescribeScalableTargetsResponse;
import software.amazon.awssdk.services.applicationautoscaling.model.DescribeScalingPoliciesRequest;
import software.amazon.awssdk.services.applicationautoscaling.model.DescribeScalingPoliciesResponse;
import software.amazon.awssdk.services.applicationautoscaling.model.ScalableDimension;
import software.amazon.awssdk.services.applicationautoscaling.model.ServiceNamespace;

/**
 * Before running this Java V2 code example, set up your development environment, including your credentials.
 *
 * For more information, see the following documentation topic:
 *
 * https://docs.aws.amazon.com/sdk-for-java/latest/developer-guide/get-started.html
 */

public class DisableDynamoDBAutoscaling {
    public static void main(String[] args) {
        final String usage = """

            Usage:
               <tableId> <policyName>\s

            Where:
               tableId - The table Id value (for example, table/Music).\s
               policyName - The name of the policy (for example, $Music5-scaling-policy). 
        
            """;
        if (args.length != 2) {
            System.out.println(usage);
            System.exit(1);
        }

        ApplicationAutoScalingClient appAutoScalingClient = ApplicationAutoScalingClient.builder()
            .region(Region.US_EAST_1)
            .build();

        ServiceNamespace ns = ServiceNamespace.DYNAMODB;
        ScalableDimension tableWCUs = ScalableDimension.DYNAMODB_TABLE_WRITE_CAPACITY_UNITS;
        String tableId = args[0];
        String policyName = args[1];

        deletePolicy(appAutoScalingClient, policyName, tableWCUs, ns, tableId);
        verifyScalingPolicies(appAutoScalingClient, tableId, ns, tableWCUs);
        deregisterScalableTarget(appAutoScalingClient, tableId, ns, tableWCUs);
        verifyTarget(appAutoScalingClient, tableId, ns, tableWCUs);
    }

    public static void deletePolicy(ApplicationAutoScalingClient appAutoScalingClient, String policyName, ScalableDimension tableWCUs, ServiceNamespace ns, String tableId) {
        try {
            DeleteScalingPolicyRequest delSPRequest = DeleteScalingPolicyRequest.builder()
                .policyName(policyName)
                .scalableDimension(tableWCUs)
                .serviceNamespace(ns)
                .resourceId(tableId)
                .build();

            appAutoScalingClient.deleteScalingPolicy(delSPRequest);
            System.out.println(policyName +" was deleted successfully.");

        } catch (ApplicationAutoScalingException e) {
            System.err.println(e.awsErrorDetails().errorMessage());
        }
    }

    // Verify that the scaling policy was deleted
    public static void verifyScalingPolicies(ApplicationAutoScalingClient appAutoScalingClient, String tableId, ServiceNamespace ns, ScalableDimension tableWCUs) {
        DescribeScalingPoliciesRequest dscRequest = DescribeScalingPoliciesRequest.builder()
            .scalableDimension(tableWCUs)
            .serviceNamespace(ns)
            .resourceId(tableId)
            .build();

        DescribeScalingPoliciesResponse response = appAutoScalingClient.describeScalingPolicies(dscRequest);
        System.out.println("DescribeScalableTargets result: ");
        System.out.println(response);
    }

    public static void deregisterScalableTarget(ApplicationAutoScalingClient appAutoScalingClient, String tableId, ServiceNamespace ns, ScalableDimension tableWCUs) {
        try {
            DeregisterScalableTargetRequest targetRequest = DeregisterScalableTargetRequest.builder()
                .scalableDimension(tableWCUs)
                .serviceNamespace(ns)
                .resourceId(tableId)
                .build();

            appAutoScalingClient.deregisterScalableTarget(targetRequest);
            System.out.println("The scalable target was deregistered.");

        } catch (ApplicationAutoScalingException e) {
            System.err.println(e.awsErrorDetails().errorMessage());
        }
    }

    public static void verifyTarget(ApplicationAutoScalingClient appAutoScalingClient, String tableId, ServiceNamespace ns, ScalableDimension tableWCUs) {
        DescribeScalableTargetsRequest dscRequest = DescribeScalableTargetsRequest.builder()
            .scalableDimension(tableWCUs)
            .serviceNamespace(ns)
            .resourceIds(tableId)
            .build();

        DescribeScalableTargetsResponse response = appAutoScalingClient.describeScalableTargets(dscRequest);
        System.out.println("DescribeScalableTargets result: ");
        System.out.println(response);
    }
}

Java v1

package com.amazonaws.codesamples.autoscaling;

import com.amazonaws.services.applicationautoscaling.AWSApplicationAutoScalingClient;
import com.amazonaws.services.applicationautoscaling.model.DeleteScalingPolicyRequest;
import com.amazonaws.services.applicationautoscaling.model.DeregisterScalableTargetRequest;
import com.amazonaws.services.applicationautoscaling.model.DescribeScalableTargetsRequest;
import com.amazonaws.services.applicationautoscaling.model.DescribeScalableTargetsResult;
import com.amazonaws.services.applicationautoscaling.model.DescribeScalingPoliciesRequest;
import com.amazonaws.services.applicationautoscaling.model.DescribeScalingPoliciesResult;
import com.amazonaws.services.applicationautoscaling.model.ScalableDimension;
import com.amazonaws.services.applicationautoscaling.model.ServiceNamespace;

public class DisableDynamoDBAutoscaling {

	static AWSApplicationAutoScalingClient aaClient = new AWSApplicationAutoScalingClient();

	public static void main(String args[]) {

		ServiceNamespace ns = ServiceNamespace.Dynamodb;
		ScalableDimension tableWCUs = ScalableDimension.DynamodbTableWriteCapacityUnits;
		String resourceID = "table/TestTable";

		// Delete the scaling policy
		DeleteScalingPolicyRequest delSPRequest = new DeleteScalingPolicyRequest()
				.withServiceNamespace(ns)
				.withScalableDimension(tableWCUs)
				.withResourceId(resourceID)
				.withPolicyName("MyScalingPolicy");

		try {
			aaClient.deleteScalingPolicy(delSPRequest);
		} catch (Exception e) {
			System.err.println("Unable to delete scaling policy: ");
			System.err.println(e.getMessage());
		}

		// Verify that the scaling policy was deleted
		DescribeScalingPoliciesRequest descSPRequest = new DescribeScalingPoliciesRequest()
				.withServiceNamespace(ns)
				.withScalableDimension(tableWCUs)
				.withResourceId(resourceID);

		try {
			DescribeScalingPoliciesResult dspResult = aaClient.describeScalingPolicies(descSPRequest);
			System.out.println("DescribeScalingPolicies result: ");
			System.out.println(dspResult);
		} catch (Exception e) {
			e.printStackTrace();
			System.err.println("Unable to describe scaling policy: ");
			System.err.println(e.getMessage());
		}

		System.out.println();

		// Remove the scalable target
		DeregisterScalableTargetRequest delSTRequest = new DeregisterScalableTargetRequest()
				.withServiceNamespace(ns)
				.withScalableDimension(tableWCUs)
				.withResourceId(resourceID);

		try {
			aaClient.deregisterScalableTarget(delSTRequest);
		} catch (Exception e) {
			System.err.println("Unable to deregister scalable target: ");
			System.err.println(e.getMessage());
		}

		// Verify that the scalable target was removed
		DescribeScalableTargetsRequest dscRequest = new DescribeScalableTargetsRequest()
				.withServiceNamespace(ns)
				.withScalableDimension(tableWCUs)
				.withResourceIds(resourceID);

		try {
			DescribeScalableTargetsResult dsaResult = aaClient.describeScalableTargets(dscRequest);
			System.out.println("DescribeScalableTargets result: ");
			System.out.println(dsaResult);
			System.out.println();
		} catch (Exception e) {
			System.err.println("Unable to describe scalable target: ");
			System.err.println(e.getMessage());
		}

	}

}