AWS IoT Enterprise Button User Guide - AWS IoT 1-Click

AWS IoT Enterprise Button User Guide

The AWS IoT Enterprise Button is a simple and easy to configure Wi-Fi-based button. It is designed for enterprises and developers to easily integrate with existing business workflows and systems using AWS IoT 1-Click.

The AWS IoT Enterprise Button supports three types of clicks:

  • Single

  • Double

  • Long press

To function correctly, you must configure the button's Wi-Fi connection using the AWS IoT 1-Click mobile app (iOS or Android). In the app, you can configure the button's Wi-Fi connection by logging in to your AWS account, or by tapping the Wi-Fi icon in the upper-right of the app to skip logging in.

After the connection is configured and claimed through the mobile app or console, the button should flash solid green when a single, double, or long press click occurs.

If you suspect there is an issue with the button after configuring it, this table can help you troubleshoot.

Color

Status

Recommendation

Blinking white

Connecting to Wi-Fi, obtaining IP address, or connecting to AWS IoT.

N/A

Solid green

Successfully connected to Wi-Fi and published a message to AWS IoT.

N/A

Blinking blue

Button is in configuration mode.

Wait for the configuration process to complete.

Solid orange

Wi-Fi not configured.

Use the AWS IoT 1-Click mobile app to configure Wi-Fi.

Red: short, short, short

There was an error connecting to the configured wireless network.

Check if any network settings have changed or if the button is too far away from the Wi-Fi router.

Red: short, short, long

There was an error obtaining an IP address from the wireless network.

Check for wireless network issues.

Red: short, long, short

There was an error performing a host name lookup.

Check for wireless network issues.

Red: short, long, long

Cannot connect to AWS IoT.

Check for wireless network issues. If no network issues exist and the problem persists, contact AWS Support Center and provide the device serial number (DSN). You'll find it on the back of the button.

Red: long, short, short

Cannot establish a secure connection with the server.

Use the AWS IoT 1-Click iOS or Android mobile apps to check if you have the latest firmware.

Red: long, short, long

Received an HTTP 403 forbidden error.

Contact the AWS Support Center and provide the DSN. You'll find it on the back of the button.

Red: after 15 second button press

Button reset.

You can reset the AWS IoT Enterprise Button Wi-Fi configuration by pressing the button for 15 seconds.