Source: update, remove

URI

/v1/flows/flowArn/source/sourceArn

HTTP methods

PUT

Operation ID: UpdateFlowSource

Updates the source of a flow.

Path parameters

Name	Type	Required	Description
flowArn	String	True	The Amazon Resource Name (ARN) of the flow.
sourceArn	String	True	The ARN of the source that you want to update.

Responses

Status code	Response model	Description
202	UpdateFlowSourceResponse	MediaConnect is updating the source.
400	ResponseError	The request that you submitted is not valid.
403	ResponseError	You don't have the required permissions to perform this operation.
404	ResponseError	MediaConnect did not find the resource that you specified in the request.
429	ResponseError	You have exceeded the service request rate limit for your MediaConnect account.
500	ResponseError	MediaConnect can't fulfill your request because it encountered an unexpected condition.
503	ResponseError	MediaConnect is currently unavailable. Try again later.

DELETE

Operation ID: RemoveFlowSource

Removes a source from a flow. Because a flow must have at least one source at all times, you can remove a source only from a flow that has two sources.

Path parameters

Name	Type	Required	Description
flowArn	String	True	The Amazon Resource Name (ARN) of the flow.
sourceArn	String	True	The ARN of the source that you want to update.

Responses

Status code	Response model	Description
202	RemoveFlowSourceResponse	MediaConnect is deleting the flow.
400	ResponseError	The request that you submitted is not valid.
403	ResponseError	You don't have the required permissions to perform this operation.
404	ResponseError	MediaConnect did not find the resource that you specified in the request.
429	ResponseError	You have exceeded the service request rate limit for your MediaConnect account.
500	ResponseError	MediaConnect can't fulfill your request because it encountered an unexpected condition.
503	ResponseError	MediaConnect is currently unavailable. Try again later.

Schemas

Request bodies

PUT schema

{
  "streamId": "string",
  "minLatency": integer,
  "vpcInterfaceName": "string",
  "maxLatency": integer,
  "description": "string",
  "maxBitrate": integer,
  "entitlementArn": "string",
  "sourceListenerPort": integer,
  "mediaStreamSourceConfigurations": [
    {
      "mediaStreamName": "string",
      "encodingName": enum,
      "inputConfigurations": [
        {
          "inputPort": integer,
          "interface": {
            "name": "string"
          }
        }
      ]
    }
  ],
  "sourceListenerAddress": "string",
  "whitelistCidr": "string",
  "senderIpAddress": "string",
  "protocol": enum,
  "senderControlPort": integer,
  "gatewayBridgeSource": {
    "bridgeArn": "string",
    "vpcInterfaceAttachment": {
      "vpcInterfaceName": "string"
    }
  },
  "decryption": {
    "resourceId": "string",
    "roleArn": "string",
    "secretArn": "string",
    "constantInitializationVector": "string",
    "keyType": enum,
    "region": "string",
    "deviceId": "string",
    "url": "string",
    "algorithm": enum
  },
  "ingestPort": integer,
  "maxSyncBuffer": integer
}

Response bodies

UpdateFlowSourceResponse schema

{
  "flowArn": "string",
  "source": {
    "sourceArn": "string",
    "vpcInterfaceName": "string",
    "description": "string",
    "entitlementArn": "string",
    "transport": {
      "streamId": "string",
      "minLatency": integer,
      "maxLatency": integer,
      "maxBitrate": integer,
      "sourceListenerPort": integer,
      "smoothingLatency": integer,
      "remoteId": "string",
      "sourceListenerAddress": "string",
      "senderIpAddress": "string",
      "protocol": enum,
      "senderControlPort": integer,
      "cidrAllowList": [
        "string"
      ],
      "maxSyncBuffer": integer
    },
    "mediaStreamSourceConfigurations": [
      {
        "mediaStreamName": "string",
        "encodingName": enum,
        "inputConfigurations": [
          {
            "inputIp": "string",
            "inputPort": integer,
            "interface": {
              "name": "string"
            }
          }
        ]
      }
    ],
    "whitelistCidr": "string",
    "senderIpAddress": "string",
    "senderControlPort": integer,
    "name": "string",
    "gatewayBridgeSource": {
      "bridgeArn": "string",
      "vpcInterfaceAttachment": {
        "vpcInterfaceName": "string"
      }
    },
    "dataTransferSubscriberFeePercent": integer,
    "ingestIp": "string",
    "decryption": {
      "resourceId": "string",
      "roleArn": "string",
      "secretArn": "string",
      "constantInitializationVector": "string",
      "keyType": enum,
      "region": "string",
      "deviceId": "string",
      "url": "string",
      "algorithm": enum
    },
    "ingestPort": integer
  }
}

RemoveFlowSourceResponse schema

{
  "sourceArn": "string",
  "flowArn": "string"
}

ResponseError schema

{
  "message": "string"
}

Properties

Encryption

Information about the encryption of the flow.

Property	Type	Required	Description
algorithm	string Values: aes128 | aes192 | aes256	False	The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).
constantInitializationVector	string	False	A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.
deviceId	string	False	The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.
keyType	string Values: speke | static-key | srt-password	False	The type of key that is used for the encryption. If you don't specify a keyType value, the service uses the default setting (static-key).
region	string	False	The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.
resourceId	string	False	An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.
roleArn	string	True	The Amazon Resource Name (ARN) of the role that you created during setup (when you set up MediaConnect as a trusted entity).
secretArn	string	False	The ARN of the secret that you created in AWS Secrets Manager to store the encryption key.
url	string	False	The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

GatewayBridgeSource

The source configuration for cloud flows receiving a stream from a bridge.

Property	Type	Required	Description
bridgeArn	string	True	The ARN of the bridge feeding this flow.
vpcInterfaceAttachment	VpcInterfaceAttachment	False	The name of the VPC interface attachment to use for this bridge source.

InputConfiguration

The transport parameters associated with an incoming media stream.

Property	Type	Required	Description
inputIp	string	True	The IP address that the flow listens on for incoming content for a media stream.
inputPort	integer Format: int32	True	The port that the flow listens on for an incoming media stream.
interface	Interface	True	The VPC interface where the media stream comes in from.

InputConfigurationRequest

The transport parameters that you want to associate with an incoming media stream.

Property	Type	Required	Description
inputPort	integer Format: int32	True	The port that you want the flow to listen on for an incoming media stream.
interface	InterfaceRequest	True	The VPC interface that you want to use for the incoming media stream.

Interface

The VPC interface that you want to use for the media stream associated with the output.

Property	Type	Required	Description
name	string	True	The name of the VPC interface that you want to use for the media stream associated with the output.

InterfaceRequest

The VPC interface that you want to designate where the media stream is coming from or going to.

Property	Type	Required	Description
name	string	True	The name of the VPC interface.

MediaStreamSourceConfiguration

The media stream that is associated with the source, and the parameters for that association.

Property	Type	Required	Description
encodingName	string Values: jxsv | raw | smpte291 | pcm	True	The format that was used to encode the data. For ancillary data streams, set the encoding name to smpte291. For audio streams, set the encoding name to pcm. For video, 2110 streams, set the encoding name to raw. For video, JPEG XS streams, set the encoding name to jxsv.
inputConfigurations	Array of type InputConfiguration	False	The media streams that you want to associate with the source.
mediaStreamName	string	True	A name that helps you distinguish one media stream from another.

MediaStreamSourceConfigurationRequest

The media stream that you want to associate with the source, and the parameters for that association.

Property	Type	Required	Description
encodingName	string Values: jxsv | raw | smpte291 | pcm	True	The format that was used to encode the data. For ancillary data streams, set the encoding name to smpte291. For audio streams, set the encoding name to pcm. For video, 2110 streams, set the encoding name to raw. For video, JPEG XS streams, set the encoding name to jxsv.
inputConfigurations	Array of type InputConfigurationRequest	False	The media streams that you want to associate with the source.
mediaStreamName	string	True	The name of the media stream.

RemoveFlowSourceResponse

The result of a successful RemoveFlowSource request including the ARN of the flow, as well as the ARN of the source that was removed.

Property	Type	Required	Description
flowArn	string	True	The ARN of the flow that you removed the source from.
sourceArn	string	True	The ARN of the source that you removed.

ResponseError

An exception raised by MediaConnect when you submit a request that cannot be completed. For more information, see the error message and documentation for the operation.

Property	Type	Required	Description
message	string	True	The specific error message that MediaConnect returns to help you understand the reason that the request did not succeed.

Source

The details of the sources of the flow.

Property	Type	Required	Description
dataTransferSubscriberFeePercent	integer	False	The percentage of the entitlement data transfer fee that you want the subscriber to be responsible for.
decryption	Encryption	False	The type of encryption that is used on the content ingested from the source.
description	string	False	A description of the source. This description is not visible outside of the current AWS account.
entitlementArn	string	False	The ARN of the entitlement that allows you to subscribe to content that comes from another AWS account. The entitlement is set by the content originator and the ARN is generated as part of the originator’s flow.
gatewayBridgeSource	GatewayBridgeSource	False	The source configuration for cloud flows receiving a stream from a bridge.
ingestIp	string	False	The IP address that the flow listens on for incoming content.
ingestPort	integer	False	The port that the flow listens on for incoming content. If the protocol of the source is Zixi, the port must be set to 2088.
mediaStreamSourceConfigurations	Array of type MediaStreamSourceConfiguration	False	The media stream that is associated with the source, and the parameters for that association.
name	string	True	The name of the source.
senderControlPort	integer Format: int32	False	The port that the flow uses to send outbound requests to initiate connection with the sender.
senderIpAddress	string	False	The IP address that the flow communicates with to initiate connection with the sender.
sourceArn	string	True	The ARN of the source.
transport	Transport	False	Attributes that are related to the transport stream.
vpcInterfaceName	string	False	The name of the VPC interface that the source content comes from.
whitelistCidr	string	False	The range of IP addresses that are allowed to contribute content to your source. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

Transport

Attributes that are related to the transport stream.

Property	Type	Required	Description
cidrAllowList	Array of type string	False	The range of IP addresses that are allowed to initiate output requests to this flow. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.
maxBitrate	integer Format: int64	False	The maximum bitrate for RIST, RTP, and RTP-FEC streams.
maxLatency	integer Format: int64	False	The maximum latency in milliseconds for a RIST source, a Zixi-based source, or a Zixi-based output.
maxSyncBuffer	integer Format: int32	False	The size of the buffer (in milliseconds) to use to sync incoming source data.
minLatency	integer Format: int64	False	The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.
protocol	string Values: zixi-push | rtp-fec | rtp | zixi-pull | rist | st2110-jpegxs | cdi | srt-listener | srt-caller | udp	True	The protocol that is used by the source or output.
remoteId	string	False	The identifier that is assigned to the Zixi receiver. This parameter applies only to outputs that use Zixi pull.
senderControlPort	integer Format: int32	False	The port that the flow uses to send outbound requests to initiate connection with the sender.
senderIpAddress	string	False	The IP address that the flow communicates with to initiate connection with the sender.
smoothingLatency	integer Format: int64	False	The smoothing latency in milliseconds for RIST, RTP, and RTP-FEC streams.
sourceListenerAddress	string	False	Source IP or domain name for SRT-caller protocol.
sourceListenerPort	integer	False	Source port for SRT-caller protocol.
streamId	string	False	The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.

UpdateEncryption

Information about the encryption of the flow.

Property	Type	Required	Description
algorithm	string Values: aes128 | aes192 | aes256	False	The type of algorithm that is used for the encryption (such as aes128, aes192, or aes256).
constantInitializationVector	string	False	A 128-bit, 16-byte hex value represented by a 32-character string, to be used with the key for encrypting content. This parameter is not valid for static key encryption.
deviceId	string	False	The value of one of the devices that you configured with your digital rights management (DRM) platform key provider. This parameter is required for SPEKE encryption and is not valid for static key encryption.
keyType	string Values: speke | static-key | srt-password	False	The type of key that is used for the encryption. If you don't specify a keyType value, the service uses the default setting (static-key).
region	string	False	The AWS Region that the API Gateway proxy endpoint was created in. This parameter is required for SPEKE encryption and is not valid for static key encryption.
resourceId	string	False	An identifier for the content. The service sends this value to the key server to identify the current endpoint. The resource ID is also known as the content ID. This parameter is required for SPEKE encryption and is not valid for static key encryption.
roleArn	string	False	The ARN of the role that you created during setup (when you set up MediaConnect as a trusted entity).
secretArn	string	False	The ARN of the secret that you created in AWS Secrets Manager to store the encryption key.
url	string	False	The URL from the API Gateway proxy that you set up to talk to your key server. This parameter is required for SPEKE encryption and is not valid for static key encryption.

UpdateFlowSourceRequest

The settings for the updated source of the flow.

Property	Type	Required	Description
decryption	UpdateEncryption	False	The type of encryption that is used on the content ingested from the source.
description	string	False	A description of the source. This description is not visible outside of the current AWS account.
entitlementArn	string	False	The ARN of the entitlement that allows you to subscribe to the flow. The entitlement is set by the content originator, and the ARN is generated as part of the originator's flow.
gatewayBridgeSource	UpdateGatewayBridgeSourceRequest	False	The source configuration for cloud flows receiving a stream from a bridge.
ingestPort	integer	False	The port that the flow listens on for incoming content. If the protocol of the source is Zixi, the port must be set to 2088.
maxBitrate	integer Format: int64	False	The maximum bitrate for RIST, RTP, and RTP-FEC streams.
maxLatency	integer Format: int64	False	The maximum latency in milliseconds. This parameter applies only to RIST-based and Zixi-based streams.
maxSyncBuffer	integer Format: int32	False	The size of the buffer (in milliseconds) to use to sync incoming source data.
mediaStreamSourceConfigurations	Array of type MediaStreamSourceConfigurationRequest	False	The media stream that is associated with the source, and the parameters for that association.
minLatency	integer Format: int64	False	The minimum latency in milliseconds for SRT-based streams. In streams that use the SRT protocol, this value that you set on your MediaConnect source or output represents the minimal potential latency of that connection. The latency of the stream is set to the highest number between the sender’s minimum latency and the receiver’s minimum latency.
protocol	string Values: zixi-push | rtp-fec | rtp | zixi-pull | rist | st2110-jpegxs | cdi | srt-listener | srt-caller | udp	False	The protocol that the source uses to deliver the content to MediaConnect.
senderControlPort	integer	False	The port that the flow uses to send outbound requests to initiate connection with the sender.
senderIpAddress	string	False	The IP address that the flow communicates with to initiate connection with the sender.
sourceListenerAddress	string	False	Source IP or domain name for SRT-caller protocol.
sourceListenerPort	integer	False	Source port for SRT-caller protocol.
streamId	string	False	The stream ID that you want to use for this transport. This parameter applies only to Zixi and SRT caller-based streams.
vpcInterfaceName	string	False	The name of the VPC interface that you want to send your output to.
whitelistCidr	string	False	The range of IP addresses that are allowed to contribute content to your source. Format the IP addresses as a Classless Inter-Domain Routing (CIDR) block; for example, 10.0.0.0/16.

UpdateFlowSourceResponse

The result of a successful UpdateFlowSource request. The response includes the ARN of the flow that was updated and the updated source configuration.

Property	Type	Required	Description
flowArn	string	True	The ARN of the flow that you want to update.
source	Source	True	The details of the sources that are assigned to the flow.

UpdateGatewayBridgeSourceRequest

The source configuration for cloud flows receiving a stream from a bridge.

Property	Type	Required	Description
bridgeArn	string	False	The ARN of the bridge feeding this flow.
vpcInterfaceAttachment	VpcInterfaceAttachment	False	The name of the VPC interface attachment to use for this bridge source.

VpcInterfaceAttachment

The VPC interface that you want to send your output to.

Property	Type	Required	Description
vpcInterfaceName	string	False	The name of the VPC interface that you want to send your output to.

See also

For more information about using this API in one of the language-specific AWS SDKs and references, see the following:

UpdateFlowSource

• AWS Command Line Interface

• AWS SDK for .NET

• AWS SDK for C++

• AWS SDK for Go v2

• AWS SDK for Java V2

• AWS SDK for JavaScript V3

• AWS SDK for PHP V3

• AWS SDK for Python

• AWS SDK for Ruby V3

RemoveFlowSource

• AWS Command Line Interface

• AWS SDK for .NET

• AWS SDK for C++

• AWS SDK for Go v2

• AWS SDK for Java V2

• AWS SDK for JavaScript V3

• AWS SDK for PHP V3

• AWS SDK for Python

• AWS SDK for Ruby V3