Network Firewall stateless and stateful rules engines - AWS Network Firewall

Network Firewall stateless and stateful rules engines

AWS Network Firewall uses two rules engines to inspect packets. The engines inspect packets according to the rules that you provide in your firewall policy.

The following figure shows the processing flow for packets coming through the firewall. First the stateless engine inspects the packet against the configured stateless rules. Depending on the packet settings, the stateless inspection criteria, and the firewall policy settings, the stateless engine might drop a packet, pass it through to its destination, or forward it to the stateful rules engine. The stateful engine inspects packets in the context of their traffic flow, using the configured stateful rules. The stateful engine either drops packets or passes them to their destination. Stateful engine activities send flow and alert logs to the firewall's logs, if logging is configured. The stateful engine sends alerts for dropped packets and can optionally send them for passed packets.


					The figure shows a firewall stateless engine, which inspects packets
						against stateless rules, and a firewall stateful engine, which inspects
						traffic flows against stateful rules. The stateless engine sits above and to
						the left of the stateful engine. One vertical grey arrow points down to the
						stateless engine from above. The stateless engine and the stateful engine
						each have a vertical green arrow labeled "pass" that comes from the bottom
						of the engine, joins the green arrow from the other engine and points down
						to the bottom of the figure. From the right side of the stateless engine, a
						grey arrow labeled "forward to stateful" points out and down to the stateful
						engine. Each engine also has a horizontal red arrow labeled "drop" that
						points right from the right side of the engine to a large red X. The
						stateful engine also has arrows indicating an alert that's sent with drop
						and an optional alert that's sent with pass.

The stateless and stateful rules inspection engines operate in different ways:

  • Stateless rules engine – Inspects each packet in isolation, without regard to factors such as the direction of traffic, or whether the packet is part of an existing, approved connection. This engine prioritizes the speed of evaluation. It takes rules with standard network connection attributes. The engine processes your rules in the order that you prioritize them and stops processing when it finds a match.

    Network Firewall stateless rules are similar in behavior and use to Amazon VPC network access control lists (ACLs).

  • Stateful rules engine – Inspects packets in the context of their traffic flow, allows you to use more complex rules, and allows you to log network traffic and to log Network Firewall firewall alerts on traffic. Stateful rules consider traffic direction. The stateful rules engine might delay packet delivery in order to group packets for inspection. By default, the stateful rules engine processes your rules in the order of their action setting, with pass rules processed first, then drop, then alert. The engine stops processing when it finds a match.

    The stateful engine takes rules that are compatible with Suricata, an open source intrusion prevention system (IPS). Suricata provides a standard rule-based language for stateful network traffic inspection. For more information about Suricata, see Working with stateful rule groups in AWS Network Firewall and the Suricata website.

    Network Firewall stateful rules are similar in behavior and use to Amazon VPC security groups. By default, the stateful rules engine allows traffic to pass, while the security groups default is to deny traffic.

Whether you use only one of these engines or a combination depends on your specific use case.