ListResourceRecordSetChanges
Lists the individual changes in the change history of a hosted zone. Each entry is one change, with the full resource record set that the change wrote or deleted. To list only the changes to the resource record sets that have a specific name and type, specify RecordName and RecordType. Weighted, latency, and other resource record sets that have the same name and type appear as separate entries, each with its SetIdentifier.
A change can take a few seconds to appear in ListResourceRecordSetChanges after it appears in ListHostedZoneChangeBatches. For a complete, ordered list of changes, use ListHostedZoneChangeBatches.
Results are paginated. To get the next page, use the NextToken value from the response.
If Change History isn't turned on for the hosted zone, Route 53 returns a FeatureNotEnabled error.
Request Syntax
GET /2013-04-01/hostedzone/Id/rrsetchanges?maxresults=MaxResults&nexttoken=NextToken&recordname=RecordName&recordtype=RecordType&sortorder=SortOrder&submittedafter=SubmittedAfter&submittedbefore=SubmittedBefore HTTP/1.1
URI Request Parameters
The request uses the following URI parameters.
- Id
-
The ID of the hosted zone that you want to list changes for.
Length Constraints: Maximum length of 32.
Required: Yes
- maxresults
-
The maximum number of changes that you want Route 53 to return in this response. Specify a value from 1 to 100. If you don't specify a value, Route 53 returns up to 100 changes.
- nexttoken
-
If the response to a previous
ListResourceRecordSetChangesrequest included aNextTokenelement, specify that value here to get the next page of results. If the previous request included any of the following parameters, include them with exactly the same values:SubmittedAfter,SubmittedBefore,SortOrder,RecordName, andRecordType. If you don't, Route 53 returns anInvalidInputerror. If you don't specifyNextToken, Route 53 returns the first page of results.A
NextTokenexpires 24 hours after Route 53 returns it, and you can use it only with the hosted zone that it was returned for.Length Constraints: Maximum length of 1024.
- recordname
-
The name of the resource record sets that you want to list changes for, for example,
www.example.com. The name must be the name of the hosted zone or a subdomain of it. If you specifyRecordName, you must also specifyRecordType. If you specify neither, the results include every change in the hosted zone.Length Constraints: Maximum length of 1024.
- recordtype
-
The DNS record type of the resource record sets that you want to list changes for. If you specify
RecordType, you must also specifyRecordName.Valid Values:
SOA | A | TXT | NS | CNAME | MX | NAPTR | PTR | SRV | SPF | AAAA | CAA | DS | TLSA | SSHFP | SVCB | HTTPS - sortorder
-
The order in which you want Route 53 to return changes. Valid values:
-
DESCENDING– Newest first. This is the default. -
ASCENDING– Oldest first.
Valid Values:
ASCENDING | DESCENDING -
- submittedafter
-
The start of the time range, in ISO 8601 format with a UTC offset, for example
2026-12-01T00:00:00Zor2026-12-01T05:30:00.123+05:30. You can specify up to nine fractional digits. Route 53 rounds a value with more than millisecond precision up to the next millisecond. The range includesSubmittedAfter.If you don't specify a value, the range starts at
RetentionStartsAt. If you specify a value that's earlier thanRetentionStartsAt, Route 53 returns anInvalidInputerror that includes the earliest time that you can specify.Because submit times can be slightly out of order, a returned
SubmittedAtcan fall just outside the range that you requested.Length Constraints: Maximum length of 35.
Pattern:
^[0-9]{4}-(0[1-9]|1[0-2])-(0[1-9]|[12][0-9]|3[01])T([01][0-9]|2[0-3]):[0-5][0-9]:[0-5][0-9](\.[0-9]{1,9})?(Z|[+-]([01][0-9]|2[0-3]):[0-5][0-9])$ - submittedbefore
-
The end of the time range, in ISO 8601 format with a UTC offset, for example
2026-12-02T00:00:00Zor2026-12-02T05:30:00.123+05:30. You can specify up to nine fractional digits. Route 53 rounds a value with more than millisecond precision up to the next millisecond. The range excludesSubmittedBefore. The value must be at least one millisecond later thanSubmittedAfter, or later thanRetentionStartsAtif you omitSubmittedAfter.If the range ends within a few seconds of the current time, a later request for the same range might return more changes.
Length Constraints: Maximum length of 35.
Pattern:
^[0-9]{4}-(0[1-9]|1[0-2])-(0[1-9]|[12][0-9]|3[01])T([01][0-9]|2[0-3]):[0-5][0-9]:[0-5][0-9](\.[0-9]{1,9})?(Z|[+-]([01][0-9]|2[0-3]):[0-5][0-9])$
Request Body
The request does not have a request body.
Response Syntax
HTTP/1.1 200
<?xml version="1.0" encoding="UTF-8"?>
<ListResourceRecordSetChangesResponse>
<NextToken>string</NextToken>
<ResourceRecordSetChanges>
<ResourceRecordSetChange>
<Action>string</Action>
<ChangeId>string</ChangeId>
<Operation>string</Operation>
<RequestId>string</RequestId>
<ResourceRecordSet>
<AliasTarget>
<DNSName>string</DNSName>
<EvaluateTargetHealth>boolean</EvaluateTargetHealth>
<HostedZoneId>string</HostedZoneId>
</AliasTarget>
<AZAffinity>
<LocationId>string</LocationId>
<LocationType>string</LocationType>
</AZAffinity>
<CidrRoutingConfig>
<CollectionId>string</CollectionId>
<LocationName>string</LocationName>
</CidrRoutingConfig>
<Failover>string</Failover>
<GeoLocation>
<ContinentCode>string</ContinentCode>
<CountryCode>string</CountryCode>
<SubdivisionCode>string</SubdivisionCode>
</GeoLocation>
<GeoProximityLocation>
<AWSRegion>string</AWSRegion>
<Bias>integer</Bias>
<Coordinates>
<Latitude>string</Latitude>
<Longitude>string</Longitude>
</Coordinates>
<LocalZoneGroup>string</LocalZoneGroup>
</GeoProximityLocation>
<HealthCheckId>string</HealthCheckId>
<MultiValueAnswer>boolean</MultiValueAnswer>
<Name>string</Name>
<Region>string</Region>
<ResourceRecords>
<ResourceRecord>
<Value>string</Value>
</ResourceRecord>
</ResourceRecords>
<SetIdentifier>string</SetIdentifier>
<TrafficPolicyInstanceId>string</TrafficPolicyInstanceId>
<TTL>long</TTL>
<Type>string</Type>
<Weight>long</Weight>
</ResourceRecordSet>
<SubmittedAt>timestamp</SubmittedAt>
<SubmittedBy>string</SubmittedBy>
</ResourceRecordSetChange>
</ResourceRecordSetChanges>
</ListResourceRecordSetChangesResponse>
Response Elements
If the action is successful, the service sends back an HTTP 200 response.
The following data is returned in XML format by the service.
- ListResourceRecordSetChangesResponse
-
Root level tag for the ListResourceRecordSetChangesResponse parameters.
Required: Yes
- NextToken
-
If there might be more changes to list, a token that you can specify in the
NextTokenparameter of another request to get the next page of results. If there are no more changes to list, the response doesn't includeNextToken.Type: String
Length Constraints: Maximum length of 1024.
- ResourceRecordSetChanges
-
The changes on this page of results. The list is empty if there are no changes that match the request.
Type: Array of ResourceRecordSetChange objects
Errors
For information about the errors that are common to all actions, see Common Error Types.
- FeatureNotEnabled
-
This error occurs when a feature that the operation requires isn't turned on for the hosted zone. For example, the tier of the hosted zone doesn't include Change History. To resolve this error, turn on the feature, or move the hosted zone to a tier that includes it.
- message
-
A message that explains which feature isn't turned on.
HTTP Status Code: 403
- InvalidInput
-
The input is not valid.
- message
HTTP Status Code: 400
- InvalidPaginationToken
-
The value that you specified to get the second or subsequent page of results is invalid.
HTTP Status Code: 400
- NoSuchHostedZone
-
No hosted zone exists with the ID that you specified.
- message
HTTP Status Code: 404
See Also
For more information about using this API in one of the language-specific AWS SDKs, see the following: