AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.
For a given DMS Serverless replication configuration, DMS connects to the source endpoint and collects the metadata to analyze the replication workload. Using this metadata, DMS then computes and provisions the required capacity and starts replicating to the target endpoint using the server resources that DMS has provisioned for the DMS Serverless replication.
See also: AWS API Documentation
start-replication
--replication-config-arn <value>
--start-replication-type <value>
[--cdc-start-time <value>]
[--cdc-start-position <value>]
[--cdc-stop-position <value>]
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]
--replication-config-arn
(string)
The Amazon Resource Name of the replication for which to start replication.
--start-replication-type
(string)
The replication type.
When the replication type is
full-load
orfull-load-and-cdc
, the only valid value for the first run of the replication isstart-replication
. This option will start the replication.You can also use ReloadTables to reload specific tables that failed during replication instead of restarting the replication.
The
resume-processing
option isn't applicable for a full-load replication, because you can't resume partially loaded tables during the full load phase.For a
full-load-and-cdc
replication, DMS migrates table data, and then applies data changes that occur on the source. To load all the tables again, and start capturing source changes, usereload-target
. Otherwise useresume-processing
, to replicate the changes from the last stop position.
--cdc-start-time
(timestamp)
Indicates the start time for a change data capture (CDC) operation. Use eitherCdcStartTime
orCdcStartPosition
to specify when you want a CDC operation to start. Specifying both values results in an error.
--cdc-start-position
(string)
Indicates when you want a change data capture (CDC) operation to start. Use either
CdcStartPosition
orCdcStartTime
to specify when you want a CDC operation to start. Specifying both values results in an error.The value can be in date, checkpoint, or LSN/SCN format.
--cdc-stop-position
(string)
Indicates when you want a change data capture (CDC) operation to stop. The value can be either server time or commit time.
--cli-input-json
(string)
Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton
. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.
--generate-cli-skeleton
(string)
Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input
, prints a sample input JSON that can be used as an argument for --cli-input-json
. If provided with the value output
, it validates the command inputs and returns a sample output JSON for that command.
--debug
(boolean)
Turn on debug logging.
--endpoint-url
(string)
Override command's default URL with the given URL.
--no-verify-ssl
(boolean)
By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.
--no-paginate
(boolean)
Disable automatic pagination. If automatic pagination is disabled, the AWS CLI will only make one call, for the first page of results.
--output
(string)
The formatting style for command output.
--query
(string)
A JMESPath query to use in filtering the response data.
--profile
(string)
Use a specific profile from your credential file.
--region
(string)
The region to use. Overrides config/env settings.
--version
(string)
Display the version of this tool.
--color
(string)
Turn on/off color output.
--no-sign-request
(boolean)
Do not sign requests. Credentials will not be loaded if this argument is provided.
--ca-bundle
(string)
The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.
--cli-read-timeout
(int)
The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.
--cli-connect-timeout
(int)
The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.
Replication -> (structure)
The replication that DMS started.
ReplicationConfigIdentifier -> (string)
The identifier for theReplicationConfig
associated with the replication.ReplicationConfigArn -> (string)
The Amazon Resource Name for theReplicationConfig
associated with the replication.SourceEndpointArn -> (string)
The Amazon Resource Name for an existingEndpoint
the serverless replication uses for its data source.TargetEndpointArn -> (string)
The Amazon Resource Name for an existingEndpoint
the serverless replication uses for its data target.ReplicationType -> (string)
The type of the serverless replication.Status -> (string)
The current status of the serverless replication.ProvisionData -> (structure)
Information about provisioning resources for an DMS serverless replication.
ProvisionState -> (string)
The current provisioning stateProvisionedCapacityUnits -> (integer)
The number of capacity units the replication is using.DateProvisioned -> (timestamp)
The timestamp when DMS provisioned replication resources.IsNewProvisioningAvailable -> (boolean)
Whether the new provisioning is available to the replication.DateNewProvisioningDataAvailable -> (timestamp)
The timestamp when provisioning became available.ReasonForNewProvisioningData -> (string)
A message describing the reason that DMS provisioned new resources for the serverless replication.StopReason -> (string)
The reason the replication task was stopped. This response parameter can return one of the following values:
"Stop Reason NORMAL"
"Stop Reason RECOVERABLE_ERROR"
"Stop Reason FATAL_ERROR"
"Stop Reason FULL_LOAD_ONLY_FINISHED"
"Stop Reason STOPPED_AFTER_FULL_LOAD"
– Full load completed, with cached changes not applied"Stop Reason STOPPED_AFTER_CACHED_EVENTS"
– Full load completed, with cached changes applied"Stop Reason EXPRESS_LICENSE_LIMITS_REACHED"
"Stop Reason STOPPED_AFTER_DDL_APPLY"
– User-defined stop task after DDL applied"Stop Reason STOPPED_DUE_TO_LOW_MEMORY"
"Stop Reason STOPPED_DUE_TO_LOW_DISK"
"Stop Reason STOPPED_AT_SERVER_TIME"
– User-defined server time for stopping task"Stop Reason STOPPED_AT_COMMIT_TIME"
– User-defined commit time for stopping task"Stop Reason RECONFIGURATION_RESTART"
"Stop Reason RECYCLE_TASK"
FailureMessages -> (list)
Error and other information about why a serverless replication failed.
(string)
ReplicationStats -> (structure)
This object provides a collection of statistics about a serverless replication.
FullLoadProgressPercent -> (integer)
The percent complete for the full load serverless replication.ElapsedTimeMillis -> (long)
The elapsed time of the replication, in milliseconds.TablesLoaded -> (integer)
The number of tables loaded for this replication.TablesLoading -> (integer)
The number of tables currently loading for this replication.TablesQueued -> (integer)
The number of tables queued for this replication.TablesErrored -> (integer)
The number of errors that have occured for this replication.FreshStartDate -> (timestamp)
The date the replication was started either with a fresh start or a target reload.StartDate -> (timestamp)
The date the replication is scheduled to start.StopDate -> (timestamp)
The date the replication was stopped.FullLoadStartDate -> (timestamp)
The date the replication full load was started.FullLoadFinishDate -> (timestamp)
The date the replication full load was finished.StartReplicationType -> (string)
The type of replication to start.CdcStartTime -> (timestamp)
Indicates the start time for a change data capture (CDC) operation. Use eitherCdcStartTime
orCdcStartPosition
to specify when you want a CDC operation to start. Specifying both values results in an error.CdcStartPosition -> (string)
Indicates the start time for a change data capture (CDC) operation. Use eitherCdcStartTime
orCdcStartPosition
to specify when you want a CDC operation to start. Specifying both values results in an error.CdcStopPosition -> (string)
Indicates when you want a change data capture (CDC) operation to stop. The value can be either server time or commit time.RecoveryCheckpoint -> (string)
Indicates the last checkpoint that occurred during a change data capture (CDC) operation. You can provide this value to theCdcStartPosition
parameter to start a CDC operation that begins at that checkpoint.ReplicationCreateTime -> (timestamp)
The time the serverless replication was created.ReplicationUpdateTime -> (timestamp)
The time the serverless replication was updated.ReplicationLastStopTime -> (timestamp)
The timestamp when replication was last stopped.ReplicationDeprovisionTime -> (timestamp)
The timestamp when DMS will deprovision the replication.