이 설명서는 의 버전 1 AWS CLI 전용입니다. 의 버전 2와 관련된 설명서는 버전 2 사용 설명서 를 AWS CLI참조하세요.
기계 번역으로 제공되는 번역입니다. 제공된 번역과 원본 영어의 내용이 상충하는 경우에는 영어 버전이 우선합니다.
를 Bash 스크립트 AWS CLI 와 함께 사용하는 DynamoDB 예제
다음 코드 예제에서는 DynamoDB 와 AWS Command Line Interface 함께 Bash 스크립트를 사용하여 작업을 수행하고 일반적인 시나리오를 구현하는 방법을 보여줍니다.
기본 사항은 서비스 내에서 필수 작업을 수행하는 방법을 보여주는 코드 예제입니다.
작업은 대규모 프로그램에서 발췌한 코드이며 컨텍스트에 맞춰 실행해야 합니다. 작업은 개별 서비스 함수를 직접적으로 호출하는 방법을 보여주며 관련 시나리오의 컨텍스트에 맞는 작업을 볼 수 있습니다.
각 예제에는 컨텍스트에서 코드를 설정하고 실행하는 방법에 대한 지침을 찾을 수 있는 전체 소스 코드에 대한 링크가 포함되어 있습니다.
기본 사항
다음 코드 예시는 다음과 같은 작업을 수행하는 방법을 보여줍니다.
영화 데이터를 저장할 수 있는 테이블을 생성합니다.
테이블에 하나의 영화를 추가하고 가져오고 업데이트합니다.
샘플 JSON 파일에서 테이블에 영화 데이터를 기록합니다.
특정 연도에 개봉된 영화를 쿼리합니다.
특정 연도 범위 동안 개봉된 영화를 스캔합니다.
테이블에서 영화를 삭제한 다음, 테이블을 삭제합니다.
- AWS CLI Bash 스크립트 사용
-
참고
에 대한 자세한 내용은 를 참조하세요 GitHub. AWS 코드 예시 리포지토리
에서 전체 예시를 찾고 설정 및 실행하는 방법을 배워보세요. DynamoDB 시작 시나리오입니다.
############################################################################### # function dynamodb_getting_started_movies # # Scenario to create an Amazon DynamoDB table and perform a series of operations on the table. # # Returns: # 0 - If successful. # 1 - If an error occurred. ############################################################################### function dynamodb_getting_started_movies() { source ./dynamodb_operations.sh key_schema_json_file="dynamodb_key_schema.json" attribute_definitions_json_file="dynamodb_attr_def.json" item_json_file="movie_item.json" key_json_file="movie_key.json" batch_json_file="batch.json" attribute_names_json_file="attribute_names.json" attributes_values_json_file="attribute_values.json" echo_repeat "*" 88 echo echo "Welcome to the Amazon DynamoDB getting started demo." echo echo_repeat "*" 88 echo local table_name echo -n "Enter a name for a new DynamoDB table: " get_input table_name=$get_input_result local provisioned_throughput="ReadCapacityUnits=5,WriteCapacityUnits=5" echo '[ {"AttributeName": "year", "KeyType": "HASH"}, {"AttributeName": "title", "KeyType": "RANGE"} ]' >"$key_schema_json_file" echo '[ {"AttributeName": "year", "AttributeType": "N"}, {"AttributeName": "title", "AttributeType": "S"} ]' >"$attribute_definitions_json_file" if dynamodb_create_table -n "$table_name" -a "$attribute_definitions_json_file" \ -k "$key_schema_json_file" -p "$provisioned_throughput" 1>/dev/null; then echo "Created a DynamoDB table named $table_name" else errecho "The table failed to create. This demo will exit." clean_up return 1 fi echo "Waiting for the table to become active...." if dynamodb_wait_table_active -n "$table_name"; then echo "The table is now active." else errecho "The table failed to become active. This demo will exit." cleanup "$table_name" return 1 fi echo echo_repeat "*" 88 echo echo -n "Enter the title of a movie you want to add to the table: " get_input local added_title added_title=$get_input_result local added_year get_int_input "What year was it released? " added_year=$get_input_result local rating get_float_input "On a scale of 1 - 10, how do you rate it? " "1" "10" rating=$get_input_result local plot echo -n "Summarize the plot for me: " get_input plot=$get_input_result echo '{ "year": {"N" :"'"$added_year"'"}, "title": {"S" : "'"$added_title"'"}, "info": {"M" : {"plot": {"S" : "'"$plot"'"}, "rating": {"N" :"'"$rating"'"} } } }' >"$item_json_file" if dynamodb_put_item -n "$table_name" -i "$item_json_file"; then echo "The movie '$added_title' was successfully added to the table '$table_name'." else errecho "Put item failed. This demo will exit." clean_up "$table_name" return 1 fi echo echo_repeat "*" 88 echo echo "Let's update your movie '$added_title'." get_float_input "You rated it $rating, what new rating would you give it? " "1" "10" rating=$get_input_result echo -n "You summarized the plot as '$plot'." echo "What would you say now? " get_input plot=$get_input_result echo '{ "year": {"N" :"'"$added_year"'"}, "title": {"S" : "'"$added_title"'"} }' >"$key_json_file" echo '{ ":r": {"N" :"'"$rating"'"}, ":p": {"S" : "'"$plot"'"} }' >"$item_json_file" local update_expression="SET info.rating = :r, info.plot = :p" if dynamodb_update_item -n "$table_name" -k "$key_json_file" -e "$update_expression" -v "$item_json_file"; then echo "Updated '$added_title' with new attributes." else errecho "Update item failed. This demo will exit." clean_up "$table_name" return 1 fi echo echo_repeat "*" 88 echo echo "We will now use batch write to upload 150 movie entries into the table." local batch_json for batch_json in movie_files/movies_*.json; do echo "{ \"$table_name\" : $(<"$batch_json") }" >"$batch_json_file" if dynamodb_batch_write_item -i "$batch_json_file" 1>/dev/null; then echo "Entries in $batch_json added to table." else errecho "Batch write failed. This demo will exit." clean_up "$table_name" return 1 fi done local title="The Lord of the Rings: The Fellowship of the Ring" local year="2001" if get_yes_no_input "Let's move on...do you want to get info about '$title'? (y/n) "; then echo '{ "year": {"N" :"'"$year"'"}, "title": {"S" : "'"$title"'"} }' >"$key_json_file" local info info=$(dynamodb_get_item -n "$table_name" -k "$key_json_file") # shellcheck disable=SC2181 if [[ ${?} -ne 0 ]]; then errecho "Get item failed. This demo will exit." clean_up "$table_name" return 1 fi echo "Here is what I found:" echo "$info" fi local ask_for_year=true while [[ "$ask_for_year" == true ]]; do echo "Let's get a list of movies released in a given year." get_int_input "Enter a year between 1972 and 2018: " "1972" "2018" year=$get_input_result echo '{ "#n": "year" }' >"$attribute_names_json_file" echo '{ ":v": {"N" :"'"$year"'"} }' >"$attributes_values_json_file" response=$(dynamodb_query -n "$table_name" -k "#n=:v" -a "$attribute_names_json_file" -v "$attributes_values_json_file") # shellcheck disable=SC2181 if [[ ${?} -ne 0 ]]; then errecho "Query table failed. This demo will exit." clean_up "$table_name" return 1 fi echo "Here is what I found:" echo "$response" if ! get_yes_no_input "Try another year? (y/n) "; then ask_for_year=false fi done echo "Now let's scan for movies released in a range of years. Enter a year: " get_int_input "Enter a year between 1972 and 2018: " "1972" "2018" local start=$get_input_result get_int_input "Enter another year: " "1972" "2018" local end=$get_input_result echo '{ "#n": "year" }' >"$attribute_names_json_file" echo '{ ":v1": {"N" : "'"$start"'"}, ":v2": {"N" : "'"$end"'"} }' >"$attributes_values_json_file" response=$(dynamodb_scan -n "$table_name" -f "#n BETWEEN :v1 AND :v2" -a "$attribute_names_json_file" -v "$attributes_values_json_file") # shellcheck disable=SC2181 if [[ ${?} -ne 0 ]]; then errecho "Scan table failed. This demo will exit." clean_up "$table_name" return 1 fi echo "Here is what I found:" echo "$response" echo echo_repeat "*" 88 echo echo "Let's remove your movie '$added_title' from the table." if get_yes_no_input "Do you want to remove '$added_title'? (y/n) "; then echo '{ "year": {"N" :"'"$added_year"'"}, "title": {"S" : "'"$added_title"'"} }' >"$key_json_file" if ! dynamodb_delete_item -n "$table_name" -k "$key_json_file"; then errecho "Delete item failed. This demo will exit." clean_up "$table_name" return 1 fi fi if get_yes_no_input "Do you want to delete the table '$table_name'? (y/n) "; then if ! clean_up "$table_name"; then return 1 fi else if ! clean_up; then return 1 fi fi return 0 }이 시나리오에 사용된 DynamoDB 함수입니다.
############################################################################### # function dynamodb_create_table # # This function creates an Amazon DynamoDB table. # # Parameters: # -n table_name -- The name of the table to create. # -a attribute_definitions -- JSON file path of a list of attributes and their types. # -k key_schema -- JSON file path of a list of attributes and their key types. # -p provisioned_throughput -- Provisioned throughput settings for the table. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################### function dynamodb_create_table() { local table_name attribute_definitions key_schema provisioned_throughput response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_create_table" echo "Creates an Amazon DynamoDB table." echo " -n table_name -- The name of the table to create." echo " -a attribute_definitions -- JSON file path of a list of attributes and their types." echo " -k key_schema -- JSON file path of a list of attributes and their key types." echo " -p provisioned_throughput -- Provisioned throughput settings for the table." echo "" } # Retrieve the calling parameters. while getopts "n:a:k:p:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; a) attribute_definitions="${OPTARG}" ;; k) key_schema="${OPTARG}" ;; p) provisioned_throughput="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$attribute_definitions" ]]; then errecho "ERROR: You must provide an attribute definitions json file path the -a parameter." usage return 1 fi if [[ -z "$key_schema" ]]; then errecho "ERROR: You must provide a key schema json file path the -k parameter." usage return 1 fi if [[ -z "$provisioned_throughput" ]]; then errecho "ERROR: You must provide a provisioned throughput json file path the -p parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " attribute_definitions: $attribute_definitions" iecho " key_schema: $key_schema" iecho " provisioned_throughput: $provisioned_throughput" iecho "" response=$(aws dynamodb create-table \ --table-name "$table_name" \ --attribute-definitions file://"$attribute_definitions" \ --key-schema file://"$key_schema" \ --provisioned-throughput "$provisioned_throughput") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports create-table operation failed.$response" return 1 fi return 0 } ############################################################################### # function dynamodb_describe_table # # This function returns the status of a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # # Response: # - TableStatus: # And: # 0 - Table is active. # 1 - If it fails. ############################################################################### function dynamodb_describe_table { local table_name local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_describe_table" echo "Describe the status of a DynamoDB table." echo " -n table_name -- The name of the table." echo "" } # Retrieve the calling parameters. while getopts "n:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi local table_status table_status=$( aws dynamodb describe-table \ --table-name "$table_name" \ --output text \ --query 'Table.TableStatus' ) local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log "$error_code" errecho "ERROR: AWS reports describe-table operation failed.$table_status" return 1 fi echo "$table_status" return 0 } ############################################################################## # function dynamodb_put_item # # This function puts an item into a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -i item -- Path to json file containing the item values. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################## function dynamodb_put_item() { local table_name item response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_put_item" echo "Put an item into a DynamoDB table." echo " -n table_name -- The name of the table." echo " -i item -- Path to json file containing the item values." echo "" } while getopts "n:i:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; i) item="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$item" ]]; then errecho "ERROR: You must provide an item with the -i parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " item: $item" iecho "" iecho "" response=$(aws dynamodb put-item \ --table-name "$table_name" \ --item file://"$item") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports put-item operation failed.$response" return 1 fi return 0 } ############################################################################## # function dynamodb_update_item # # This function updates an item in a DynamoDB table. # # # Parameters: # -n table_name -- The name of the table. # -k keys -- Path to json file containing the keys that identify the item to update. # -e update expression -- An expression that defines one or more attributes to be updated. # -v values -- Path to json file containing the update values. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################# function dynamodb_update_item() { local table_name keys update_expression values response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_update_item" echo "Update an item in a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k keys -- Path to json file containing the keys that identify the item to update." echo " -e update expression -- An expression that defines one or more attributes to be updated." echo " -v values -- Path to json file containing the update values." echo "" } while getopts "n:k:e:v:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) keys="${OPTARG}" ;; e) update_expression="${OPTARG}" ;; v) values="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$keys" ]]; then errecho "ERROR: You must provide a keys json file path the -k parameter." usage return 1 fi if [[ -z "$update_expression" ]]; then errecho "ERROR: You must provide an update expression with the -e parameter." usage return 1 fi if [[ -z "$values" ]]; then errecho "ERROR: You must provide a values json file path the -v parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " keys: $keys" iecho " update_expression: $update_expression" iecho " values: $values" response=$(aws dynamodb update-item \ --table-name "$table_name" \ --key file://"$keys" \ --update-expression "$update_expression" \ --expression-attribute-values file://"$values") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports update-item operation failed.$response" return 1 fi return 0 } ############################################################################## # function dynamodb_batch_write_item # # This function writes a batch of items into a DynamoDB table. # # Parameters: # -i item -- Path to json file containing the items to write. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################ function dynamodb_batch_write_item() { local item response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_batch_write_item" echo "Write a batch of items into a DynamoDB table." echo " -i item -- Path to json file containing the items to write." echo "" } while getopts "i:h" option; do case "${option}" in i) item="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$item" ]]; then errecho "ERROR: You must provide an item with the -i parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " item: $item" iecho "" response=$(aws dynamodb batch-write-item \ --request-items file://"$item") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports batch-write-item operation failed.$response" return 1 fi return 0 } ############################################################################# # function dynamodb_get_item # # This function gets an item from a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -k keys -- Path to json file containing the keys that identify the item to get. # [-q query] -- Optional JMESPath query expression. # # Returns: # The item as text output. # And: # 0 - If successful. # 1 - If it fails. ############################################################################ function dynamodb_get_item() { local table_name keys query response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_get_item" echo "Get an item from a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k keys -- Path to json file containing the keys that identify the item to get." echo " [-q query] -- Optional JMESPath query expression." echo "" } query="" while getopts "n:k:q:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) keys="${OPTARG}" ;; q) query="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$keys" ]]; then errecho "ERROR: You must provide a keys json file path the -k parameter." usage return 1 fi if [[ -n "$query" ]]; then response=$(aws dynamodb get-item \ --table-name "$table_name" \ --key file://"$keys" \ --output text \ --query "$query") else response=$( aws dynamodb get-item \ --table-name "$table_name" \ --key file://"$keys" \ --output text ) fi local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports get-item operation failed.$response" return 1 fi if [[ -n "$query" ]]; then echo "$response" | sed "/^\t/s/\t//1" # Remove initial tab that the JMSEPath query inserts on some strings. else echo "$response" fi return 0 } ############################################################################# # function dynamodb_query # # This function queries a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -k key_condition_expression -- The key condition expression. # -a attribute_names -- Path to JSON file containing the attribute names. # -v attribute_values -- Path to JSON file containing the attribute values. # [-p projection_expression] -- Optional projection expression. # # Returns: # The items as json output. # And: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_query() { local table_name key_condition_expression attribute_names attribute_values projection_expression response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_query" echo "Query a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k key_condition_expression -- The key condition expression." echo " -a attribute_names -- Path to JSON file containing the attribute names." echo " -v attribute_values -- Path to JSON file containing the attribute values." echo " [-p projection_expression] -- Optional projection expression." echo "" } while getopts "n:k:a:v:p:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) key_condition_expression="${OPTARG}" ;; a) attribute_names="${OPTARG}" ;; v) attribute_values="${OPTARG}" ;; p) projection_expression="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$key_condition_expression" ]]; then errecho "ERROR: You must provide a key condition expression with the -k parameter." usage return 1 fi if [[ -z "$attribute_names" ]]; then errecho "ERROR: You must provide a attribute names with the -a parameter." usage return 1 fi if [[ -z "$attribute_values" ]]; then errecho "ERROR: You must provide a attribute values with the -v parameter." usage return 1 fi if [[ -z "$projection_expression" ]]; then response=$(aws dynamodb query \ --table-name "$table_name" \ --key-condition-expression "$key_condition_expression" \ --expression-attribute-names file://"$attribute_names" \ --expression-attribute-values file://"$attribute_values") else response=$(aws dynamodb query \ --table-name "$table_name" \ --key-condition-expression "$key_condition_expression" \ --expression-attribute-names file://"$attribute_names" \ --expression-attribute-values file://"$attribute_values" \ --projection-expression "$projection_expression") fi local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports query operation failed.$response" return 1 fi echo "$response" return 0 } ############################################################################# # function dynamodb_scan # # This function scans a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -f filter_expression -- The filter expression. # -a expression_attribute_names -- Path to JSON file containing the expression attribute names. # -v expression_attribute_values -- Path to JSON file containing the expression attribute values. # [-p projection_expression] -- Optional projection expression. # # Returns: # The items as json output. # And: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_scan() { local table_name filter_expression expression_attribute_names expression_attribute_values projection_expression response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_scan" echo "Scan a DynamoDB table." echo " -n table_name -- The name of the table." echo " -f filter_expression -- The filter expression." echo " -a expression_attribute_names -- Path to JSON file containing the expression attribute names." echo " -v expression_attribute_values -- Path to JSON file containing the expression attribute values." echo " [-p projection_expression] -- Optional projection expression." echo "" } while getopts "n:f:a:v:p:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; f) filter_expression="${OPTARG}" ;; a) expression_attribute_names="${OPTARG}" ;; v) expression_attribute_values="${OPTARG}" ;; p) projection_expression="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$filter_expression" ]]; then errecho "ERROR: You must provide a filter expression with the -f parameter." usage return 1 fi if [[ -z "$expression_attribute_names" ]]; then errecho "ERROR: You must provide expression attribute names with the -a parameter." usage return 1 fi if [[ -z "$expression_attribute_values" ]]; then errecho "ERROR: You must provide expression attribute values with the -v parameter." usage return 1 fi if [[ -z "$projection_expression" ]]; then response=$(aws dynamodb scan \ --table-name "$table_name" \ --filter-expression "$filter_expression" \ --expression-attribute-names file://"$expression_attribute_names" \ --expression-attribute-values file://"$expression_attribute_values") else response=$(aws dynamodb scan \ --table-name "$table_name" \ --filter-expression "$filter_expression" \ --expression-attribute-names file://"$expression_attribute_names" \ --expression-attribute-values file://"$expression_attribute_values" \ --projection-expression "$projection_expression") fi local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports scan operation failed.$response" return 1 fi echo "$response" return 0 } ############################################################################## # function dynamodb_delete_item # # This function deletes an item from a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -k keys -- Path to json file containing the keys that identify the item to delete. # # Returns: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_delete_item() { local table_name keys response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_delete_item" echo "Delete an item from a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k keys -- Path to json file containing the keys that identify the item to delete." echo "" } while getopts "n:k:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) keys="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$keys" ]]; then errecho "ERROR: You must provide a keys json file path the -k parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " keys: $keys" iecho "" response=$(aws dynamodb delete-item \ --table-name "$table_name" \ --key file://"$keys") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports delete-item operation failed.$response" return 1 fi return 0 } ############################################################################### # function dynamodb_delete_table # # This function deletes a DynamoDB table. # # Parameters: # -n table_name -- The name of the table to delete. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################### function dynamodb_delete_table() { local table_name response local option OPTARG # Required to use getopts command in a function. # bashsupport disable=BP5008 function usage() { echo "function dynamodb_delete_table" echo "Deletes an Amazon DynamoDB table." echo " -n table_name -- The name of the table to delete." echo "" } # Retrieve the calling parameters. while getopts "n:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho "" response=$(aws dynamodb delete-table \ --table-name "$table_name") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports delete-table operation failed.$response" return 1 fi return 0 }이 시나리오에 사용된 유틸리티 함수입니다.
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
API 자세한 내용은 AWS CLI 명령 참조의 다음 주제를 참조하세요.
-
작업
다음 코드 예시에서는 BatchGetItem을 사용하는 방법을 보여 줍니다.
- AWS CLI Bash 스크립트 사용
-
참고
에 대한 자세한 내용은 를 참조하세요 GitHub. AWS 코드 예시 리포지토리
에서 전체 예시를 찾고 설정 및 실행하는 방법을 배워보세요. ############################################################################# # function dynamodb_batch_get_item # # This function gets a batch of items from a DynamoDB table. # # Parameters: # -i item -- Path to json file containing the keys of the items to get. # # Returns: # The items as json output. # And: # 0 - If successful. # 1 - If it fails. ########################################################################## function dynamodb_batch_get_item() { local item response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_batch_get_item" echo "Get a batch of items from a DynamoDB table." echo " -i item -- Path to json file containing the keys of the items to get." echo "" } while getopts "i:h" option; do case "${option}" in i) item="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$item" ]]; then errecho "ERROR: You must provide an item with the -i parameter." usage return 1 fi response=$(aws dynamodb batch-get-item \ --request-items file://"$item") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports batch-get-item operation failed.$response" return 1 fi echo "$response" return 0 }이 예제에 사용된 유틸리티 함수
############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
자세한 API 내용은 명령 참조BatchGetItem의 섹션을 참조하세요. AWS CLI
-
다음 코드 예시에서는 BatchWriteItem을 사용하는 방법을 보여 줍니다.
- AWS CLI Bash 스크립트 사용
-
참고
에 대한 자세한 내용은 를 참조하세요 GitHub. AWS 코드 예시 리포지토리
에서 전체 예시를 찾고 설정 및 실행하는 방법을 배워보세요. ############################################################################## # function dynamodb_batch_write_item # # This function writes a batch of items into a DynamoDB table. # # Parameters: # -i item -- Path to json file containing the items to write. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################ function dynamodb_batch_write_item() { local item response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_batch_write_item" echo "Write a batch of items into a DynamoDB table." echo " -i item -- Path to json file containing the items to write." echo "" } while getopts "i:h" option; do case "${option}" in i) item="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$item" ]]; then errecho "ERROR: You must provide an item with the -i parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " item: $item" iecho "" response=$(aws dynamodb batch-write-item \ --request-items file://"$item") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports batch-write-item operation failed.$response" return 1 fi return 0 }이 예제에 사용된 유틸리티 함수
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
자세한 API 내용은 명령 참조BatchWriteItem의 섹션을 참조하세요. AWS CLI
-
다음 코드 예시에서는 CreateTable을 사용하는 방법을 보여 줍니다.
- AWS CLI Bash 스크립트 사용
-
참고
에 대한 자세한 내용은 를 참조하세요 GitHub. AWS 코드 예시 리포지토리
에서 전체 예시를 찾고 설정 및 실행하는 방법을 배워보세요. ############################################################################### # function dynamodb_create_table # # This function creates an Amazon DynamoDB table. # # Parameters: # -n table_name -- The name of the table to create. # -a attribute_definitions -- JSON file path of a list of attributes and their types. # -k key_schema -- JSON file path of a list of attributes and their key types. # -p provisioned_throughput -- Provisioned throughput settings for the table. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################### function dynamodb_create_table() { local table_name attribute_definitions key_schema provisioned_throughput response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_create_table" echo "Creates an Amazon DynamoDB table." echo " -n table_name -- The name of the table to create." echo " -a attribute_definitions -- JSON file path of a list of attributes and their types." echo " -k key_schema -- JSON file path of a list of attributes and their key types." echo " -p provisioned_throughput -- Provisioned throughput settings for the table." echo "" } # Retrieve the calling parameters. while getopts "n:a:k:p:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; a) attribute_definitions="${OPTARG}" ;; k) key_schema="${OPTARG}" ;; p) provisioned_throughput="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$attribute_definitions" ]]; then errecho "ERROR: You must provide an attribute definitions json file path the -a parameter." usage return 1 fi if [[ -z "$key_schema" ]]; then errecho "ERROR: You must provide a key schema json file path the -k parameter." usage return 1 fi if [[ -z "$provisioned_throughput" ]]; then errecho "ERROR: You must provide a provisioned throughput json file path the -p parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " attribute_definitions: $attribute_definitions" iecho " key_schema: $key_schema" iecho " provisioned_throughput: $provisioned_throughput" iecho "" response=$(aws dynamodb create-table \ --table-name "$table_name" \ --attribute-definitions file://"$attribute_definitions" \ --key-schema file://"$key_schema" \ --provisioned-throughput "$provisioned_throughput") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports create-table operation failed.$response" return 1 fi return 0 }이 예제에 사용된 유틸리티 함수
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
자세한 API 내용은 명령 참조CreateTable의 섹션을 참조하세요. AWS CLI
-
다음 코드 예시에서는 DeleteItem을 사용하는 방법을 보여 줍니다.
- AWS CLI Bash 스크립트 사용
-
참고
에 대한 자세한 내용은 를 참조하세요 GitHub. AWS 코드 예시 리포지토리
에서 전체 예시를 찾고 설정 및 실행하는 방법을 배워보세요. ############################################################################## # function dynamodb_delete_item # # This function deletes an item from a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -k keys -- Path to json file containing the keys that identify the item to delete. # # Returns: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_delete_item() { local table_name keys response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_delete_item" echo "Delete an item from a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k keys -- Path to json file containing the keys that identify the item to delete." echo "" } while getopts "n:k:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) keys="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$keys" ]]; then errecho "ERROR: You must provide a keys json file path the -k parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " keys: $keys" iecho "" response=$(aws dynamodb delete-item \ --table-name "$table_name" \ --key file://"$keys") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports delete-item operation failed.$response" return 1 fi return 0 }이 예제에 사용된 유틸리티 함수
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
자세한 API 내용은 명령 참조DeleteItem의 섹션을 참조하세요. AWS CLI
-
다음 코드 예시에서는 DeleteTable을 사용하는 방법을 보여 줍니다.
- AWS CLI Bash 스크립트 사용
-
참고
에 대한 자세한 내용은 를 참조하세요 GitHub. AWS 코드 예시 리포지토리
에서 전체 예시를 찾고 설정 및 실행하는 방법을 배워보세요. ############################################################################### # function dynamodb_delete_table # # This function deletes a DynamoDB table. # # Parameters: # -n table_name -- The name of the table to delete. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################### function dynamodb_delete_table() { local table_name response local option OPTARG # Required to use getopts command in a function. # bashsupport disable=BP5008 function usage() { echo "function dynamodb_delete_table" echo "Deletes an Amazon DynamoDB table." echo " -n table_name -- The name of the table to delete." echo "" } # Retrieve the calling parameters. while getopts "n:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho "" response=$(aws dynamodb delete-table \ --table-name "$table_name") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports delete-table operation failed.$response" return 1 fi return 0 }이 예제에 사용된 유틸리티 함수
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
자세한 API 내용은 명령 참조DeleteTable의 섹션을 참조하세요. AWS CLI
-
다음 코드 예시에서는 DescribeTable을 사용하는 방법을 보여 줍니다.
- AWS CLI Bash 스크립트 사용
-
참고
에 대한 자세한 내용은 를 참조하세요 GitHub. AWS 코드 예시 리포지토리
에서 전체 예시를 찾고 설정 및 실행하는 방법을 배워보세요. ############################################################################### # function dynamodb_describe_table # # This function returns the status of a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # # Response: # - TableStatus: # And: # 0 - Table is active. # 1 - If it fails. ############################################################################### function dynamodb_describe_table { local table_name local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_describe_table" echo "Describe the status of a DynamoDB table." echo " -n table_name -- The name of the table." echo "" } # Retrieve the calling parameters. while getopts "n:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi local table_status table_status=$( aws dynamodb describe-table \ --table-name "$table_name" \ --output text \ --query 'Table.TableStatus' ) local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log "$error_code" errecho "ERROR: AWS reports describe-table operation failed.$table_status" return 1 fi echo "$table_status" return 0 }이 예제에 사용된 유틸리티 함수
############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
자세한 API 내용은 명령 참조DescribeTable의 섹션을 참조하세요. AWS CLI
-
다음 코드 예시에서는 GetItem을 사용하는 방법을 보여 줍니다.
- AWS CLI Bash 스크립트 사용
-
참고
에 대한 자세한 내용은 를 참조하세요 GitHub. AWS 코드 예시 리포지토리
에서 전체 예시를 찾고 설정 및 실행하는 방법을 배워보세요. ############################################################################# # function dynamodb_get_item # # This function gets an item from a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -k keys -- Path to json file containing the keys that identify the item to get. # [-q query] -- Optional JMESPath query expression. # # Returns: # The item as text output. # And: # 0 - If successful. # 1 - If it fails. ############################################################################ function dynamodb_get_item() { local table_name keys query response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_get_item" echo "Get an item from a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k keys -- Path to json file containing the keys that identify the item to get." echo " [-q query] -- Optional JMESPath query expression." echo "" } query="" while getopts "n:k:q:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) keys="${OPTARG}" ;; q) query="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$keys" ]]; then errecho "ERROR: You must provide a keys json file path the -k parameter." usage return 1 fi if [[ -n "$query" ]]; then response=$(aws dynamodb get-item \ --table-name "$table_name" \ --key file://"$keys" \ --output text \ --query "$query") else response=$( aws dynamodb get-item \ --table-name "$table_name" \ --key file://"$keys" \ --output text ) fi local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports get-item operation failed.$response" return 1 fi if [[ -n "$query" ]]; then echo "$response" | sed "/^\t/s/\t//1" # Remove initial tab that the JMSEPath query inserts on some strings. else echo "$response" fi return 0 }이 예제에 사용된 유틸리티 함수
############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
자세한 API 내용은 명령 참조GetItem의 섹션을 참조하세요. AWS CLI
-
다음 코드 예시에서는 ListTables을 사용하는 방법을 보여 줍니다.
- AWS CLI Bash 스크립트 사용
-
참고
에 대한 자세한 내용은 를 참조하세요 GitHub. AWS 코드 예시 리포지토리
에서 전체 예시를 찾고 설정 및 실행하는 방법을 배워보세요. ############################################################################## # function dynamodb_list_tables # # This function lists all the tables in a DynamoDB. # # Returns: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_list_tables() { response=$(aws dynamodb list-tables \ --output text \ --query "TableNames") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports batch-write-item operation failed.$response" return 1 fi echo "$response" | tr -s "[:space:]" "\n" return 0 }이 예제에 사용된 유틸리티 함수
############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
자세한 API 내용은 명령 참조ListTables의 섹션을 참조하세요. AWS CLI
-
다음 코드 예시에서는 PutItem을 사용하는 방법을 보여 줍니다.
- AWS CLI Bash 스크립트 사용
-
참고
에 대한 자세한 내용은 를 참조하세요 GitHub. AWS 코드 예시 리포지토리
에서 전체 예시를 찾고 설정 및 실행하는 방법을 배워보세요. ############################################################################## # function dynamodb_put_item # # This function puts an item into a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -i item -- Path to json file containing the item values. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################## function dynamodb_put_item() { local table_name item response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_put_item" echo "Put an item into a DynamoDB table." echo " -n table_name -- The name of the table." echo " -i item -- Path to json file containing the item values." echo "" } while getopts "n:i:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; i) item="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$item" ]]; then errecho "ERROR: You must provide an item with the -i parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " item: $item" iecho "" iecho "" response=$(aws dynamodb put-item \ --table-name "$table_name" \ --item file://"$item") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports put-item operation failed.$response" return 1 fi return 0 }이 예제에 사용된 유틸리티 함수
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
자세한 API 내용은 명령 참조PutItem의 섹션을 참조하세요. AWS CLI
-
다음 코드 예시에서는 Query을 사용하는 방법을 보여 줍니다.
- AWS CLI Bash 스크립트 사용
-
참고
에 대한 자세한 내용은 를 참조하세요 GitHub. AWS 코드 예시 리포지토리
에서 전체 예시를 찾고 설정 및 실행하는 방법을 배워보세요. ############################################################################# # function dynamodb_query # # This function queries a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -k key_condition_expression -- The key condition expression. # -a attribute_names -- Path to JSON file containing the attribute names. # -v attribute_values -- Path to JSON file containing the attribute values. # [-p projection_expression] -- Optional projection expression. # # Returns: # The items as json output. # And: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_query() { local table_name key_condition_expression attribute_names attribute_values projection_expression response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_query" echo "Query a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k key_condition_expression -- The key condition expression." echo " -a attribute_names -- Path to JSON file containing the attribute names." echo " -v attribute_values -- Path to JSON file containing the attribute values." echo " [-p projection_expression] -- Optional projection expression." echo "" } while getopts "n:k:a:v:p:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) key_condition_expression="${OPTARG}" ;; a) attribute_names="${OPTARG}" ;; v) attribute_values="${OPTARG}" ;; p) projection_expression="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$key_condition_expression" ]]; then errecho "ERROR: You must provide a key condition expression with the -k parameter." usage return 1 fi if [[ -z "$attribute_names" ]]; then errecho "ERROR: You must provide a attribute names with the -a parameter." usage return 1 fi if [[ -z "$attribute_values" ]]; then errecho "ERROR: You must provide a attribute values with the -v parameter." usage return 1 fi if [[ -z "$projection_expression" ]]; then response=$(aws dynamodb query \ --table-name "$table_name" \ --key-condition-expression "$key_condition_expression" \ --expression-attribute-names file://"$attribute_names" \ --expression-attribute-values file://"$attribute_values") else response=$(aws dynamodb query \ --table-name "$table_name" \ --key-condition-expression "$key_condition_expression" \ --expression-attribute-names file://"$attribute_names" \ --expression-attribute-values file://"$attribute_values" \ --projection-expression "$projection_expression") fi local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports query operation failed.$response" return 1 fi echo "$response" return 0 }이 예제에 사용된 유틸리티 함수
############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
자세한 API 내용은 AWS CLI 명령 참조의 쿼리를 참조하세요.
-
다음 코드 예시에서는 Scan을 사용하는 방법을 보여 줍니다.
- AWS CLI Bash 스크립트 사용
-
참고
에 대한 자세한 내용은 를 참조하세요 GitHub. AWS 코드 예시 리포지토리
에서 전체 예시를 찾고 설정 및 실행하는 방법을 배워보세요. ############################################################################# # function dynamodb_scan # # This function scans a DynamoDB table. # # Parameters: # -n table_name -- The name of the table. # -f filter_expression -- The filter expression. # -a expression_attribute_names -- Path to JSON file containing the expression attribute names. # -v expression_attribute_values -- Path to JSON file containing the expression attribute values. # [-p projection_expression] -- Optional projection expression. # # Returns: # The items as json output. # And: # 0 - If successful. # 1 - If it fails. ########################################################################### function dynamodb_scan() { local table_name filter_expression expression_attribute_names expression_attribute_values projection_expression response local option OPTARG # Required to use getopts command in a function. # ###################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_scan" echo "Scan a DynamoDB table." echo " -n table_name -- The name of the table." echo " -f filter_expression -- The filter expression." echo " -a expression_attribute_names -- Path to JSON file containing the expression attribute names." echo " -v expression_attribute_values -- Path to JSON file containing the expression attribute values." echo " [-p projection_expression] -- Optional projection expression." echo "" } while getopts "n:f:a:v:p:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; f) filter_expression="${OPTARG}" ;; a) expression_attribute_names="${OPTARG}" ;; v) expression_attribute_values="${OPTARG}" ;; p) projection_expression="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$filter_expression" ]]; then errecho "ERROR: You must provide a filter expression with the -f parameter." usage return 1 fi if [[ -z "$expression_attribute_names" ]]; then errecho "ERROR: You must provide expression attribute names with the -a parameter." usage return 1 fi if [[ -z "$expression_attribute_values" ]]; then errecho "ERROR: You must provide expression attribute values with the -v parameter." usage return 1 fi if [[ -z "$projection_expression" ]]; then response=$(aws dynamodb scan \ --table-name "$table_name" \ --filter-expression "$filter_expression" \ --expression-attribute-names file://"$expression_attribute_names" \ --expression-attribute-values file://"$expression_attribute_values") else response=$(aws dynamodb scan \ --table-name "$table_name" \ --filter-expression "$filter_expression" \ --expression-attribute-names file://"$expression_attribute_names" \ --expression-attribute-values file://"$expression_attribute_values" \ --projection-expression "$projection_expression") fi local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports scan operation failed.$response" return 1 fi echo "$response" return 0 }이 예제에 사용된 유틸리티 함수
############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
자세한 API 내용은 명령 참조의 스캔을 참조하세요. AWS CLI
-
다음 코드 예시에서는 UpdateItem을 사용하는 방법을 보여 줍니다.
- AWS CLI Bash 스크립트 사용
-
참고
에 대한 자세한 내용은 를 참조하세요 GitHub. AWS 코드 예시 리포지토리
에서 전체 예시를 찾고 설정 및 실행하는 방법을 배워보세요. ############################################################################## # function dynamodb_update_item # # This function updates an item in a DynamoDB table. # # # Parameters: # -n table_name -- The name of the table. # -k keys -- Path to json file containing the keys that identify the item to update. # -e update expression -- An expression that defines one or more attributes to be updated. # -v values -- Path to json file containing the update values. # # Returns: # 0 - If successful. # 1 - If it fails. ############################################################################# function dynamodb_update_item() { local table_name keys update_expression values response local option OPTARG # Required to use getopts command in a function. ####################################### # Function usage explanation ####################################### function usage() { echo "function dynamodb_update_item" echo "Update an item in a DynamoDB table." echo " -n table_name -- The name of the table." echo " -k keys -- Path to json file containing the keys that identify the item to update." echo " -e update expression -- An expression that defines one or more attributes to be updated." echo " -v values -- Path to json file containing the update values." echo "" } while getopts "n:k:e:v:h" option; do case "${option}" in n) table_name="${OPTARG}" ;; k) keys="${OPTARG}" ;; e) update_expression="${OPTARG}" ;; v) values="${OPTARG}" ;; h) usage return 0 ;; \?) echo "Invalid parameter" usage return 1 ;; esac done export OPTIND=1 if [[ -z "$table_name" ]]; then errecho "ERROR: You must provide a table name with the -n parameter." usage return 1 fi if [[ -z "$keys" ]]; then errecho "ERROR: You must provide a keys json file path the -k parameter." usage return 1 fi if [[ -z "$update_expression" ]]; then errecho "ERROR: You must provide an update expression with the -e parameter." usage return 1 fi if [[ -z "$values" ]]; then errecho "ERROR: You must provide a values json file path the -v parameter." usage return 1 fi iecho "Parameters:\n" iecho " table_name: $table_name" iecho " keys: $keys" iecho " update_expression: $update_expression" iecho " values: $values" response=$(aws dynamodb update-item \ --table-name "$table_name" \ --key file://"$keys" \ --update-expression "$update_expression" \ --expression-attribute-values file://"$values") local error_code=${?} if [[ $error_code -ne 0 ]]; then aws_cli_error_log $error_code errecho "ERROR: AWS reports update-item operation failed.$response" return 1 fi return 0 }이 예제에 사용된 유틸리티 함수
############################################################################### # function iecho # # This function enables the script to display the specified text only if # the global variable $VERBOSE is set to true. ############################################################################### function iecho() { if [[ $VERBOSE == true ]]; then echo "$@" fi } ############################################################################### # function errecho # # This function outputs everything sent to it to STDERR (standard error output). ############################################################################### function errecho() { printf "%s\n" "$*" 1>&2 } ############################################################################## # function aws_cli_error_log() # # This function is used to log the error messages from the AWS CLI. # # See https://docs.aws.amazon.com/cli/latest/topic/return-codes.html#cli-aws-help-return-codes. # # The function expects the following argument: # $1 - The error code returned by the AWS CLI. # # Returns: # 0: - Success. # ############################################################################## function aws_cli_error_log() { local err_code=$1 errecho "Error code : $err_code" if [ "$err_code" == 1 ]; then errecho " One or more S3 transfers failed." elif [ "$err_code" == 2 ]; then errecho " Command line failed to parse." elif [ "$err_code" == 130 ]; then errecho " Process received SIGINT." elif [ "$err_code" == 252 ]; then errecho " Command syntax invalid." elif [ "$err_code" == 253 ]; then errecho " The system environment or configuration was invalid." elif [ "$err_code" == 254 ]; then errecho " The service returned an error." elif [ "$err_code" == 255 ]; then errecho " 255 is a catch-all error." fi return 0 }-
자세한 API 내용은 명령 참조UpdateItem의 섹션을 참조하세요. AWS CLI
-
