전체 서명 버전 4 서명 프로세스 예(Python) - AWS 일반 참조

기계 번역으로 제공되는 번역입니다. 제공된 번역과 원본 영어의 내용이 상충하는 경우에는 영어 버전이 우선합니다.

전체 서명 버전 4 서명 프로세스 예(Python)

이 단원에서는 AWS에서 서명 버전 4로 작업하는 방법을 설명하는 Python으로 작성된 예제 프로그램을 보여줍니다. AWS 요청에 서명하는 전체 프로세스를 쉽게 이해할 수 있도록 Python의 몇 가지 특정 기능을 사용하여 이러한 예제 프로그램을 간단히 작성했습니다.

참고

AWS SDK(SDK for C++, Go용 SDK, Java용 SDK, AWS SDK for JavaScript, .NET용 AWS SDK, PHP용 SDK, Python용 SDK(Boto3) 또는 Ruby용 SDK 등) 중 하나를 사용할 경우, 서명 키를 생성하고 인증 정보를 요청에 추가하는 단계를 직접 하지 않아도 됩니다. SDK에서 이 작업을 자동으로 수행합니다. HTTP 또는 HTTPS를 직접 요청하는 경우에만 요청에 수동으로 서명해야 합니다.

이러한 예제 프로그램을 사용하려면 다음이 필요합니다.

  • Python 2.x가 컴퓨터에 설치되어 있어야 합니다. 이 버전은 Python 사이트에서 다운로드할 수 있습니다. 이러한 프로그램은 Python 2.7 및 3.6으로 테스트했습니다.

  • 예제 스크립트에서 웹 요청을 생성하는 데 사용되는 Python 요청 라이브러리가 필요합니다. Python 패키지를 설치하는 간편한 방법은 Python 패키지 인덱스 사이트에서 패키지를 가져오는 pip를 사용하는 것입니다. 그런 다음 명령줄에서 pip install requests를 실행하여 requests를 설치할 수 있습니다.

  • AWS_ACCESS_KEY_IDAWS_SECRET_ACCESS_KEY 환경 변수에 액세스 키(액세스 키 ID 및 보안 액세스 키)가 필요합니다. 또는 이러한 값을 자격 증명 파일에 유지한 후 해당 파일에서 읽을 수 있습니다. 자격 증명을 코드에 포함하지 않는 것이 가장 좋은 방법입니다. 자세한 내용은 Amazon Web Services 일반 참조AWS 액세스 키 관리 모범 사례 단원을 참조하십시오.

다음 예에서는 UTF-8을 사용하여 표준 요청과 서명할 문자열을 인코딩하지만, 서명 버전 4에서는 특정 문자 인코딩을 사용하도록 요구하지 않습니다. 하지만 일부 AWS 서비스에서는 특정 인코딩이 필요할 수 있습니다. 자세한 내용은 해당 서비스에 대한 문서를 참조하십시오.

authorization 헤더에서 GET 사용(Python)

다음 예에서는 Python용 SDK(Boto3) 없이 Amazon EC2 쿼리 API를 사용하여 요청을 생성하는 방법을 보여줍니다. 이 요청에서는 GET 요청을 생성하고 Authorization 헤더를 사용하여 인증 정보를 AWS에 전달합니다.

# Copyright 2010-2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. # # This file is licensed under the Apache License, Version 2.0 (the "License"). # You may not use this file except in compliance with the License. A copy of the # License is located at # # http://aws.amazon.com/apache2.0/ # # This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS # OF ANY KIND, either express or implied. See the License for the specific # language governing permissions and limitations under the License. # # ABOUT THIS PYTHON SAMPLE: This sample is part of the AWS General Reference # Signing AWS API Requests top available at # https://docs.aws.amazon.com/general/latest/gr/sigv4-signed-request-examples.html # # AWS Version 4 signing example # EC2 API (DescribeRegions) # See: http://docs.aws.amazon.com/general/latest/gr/sigv4_signing.html # This version makes a GET request and passes the signature # in the Authorization header. import sys, os, base64, datetime, hashlib, hmac import requests # pip install requests # ************* REQUEST VALUES ************* method = 'GET' service = 'ec2' host = 'ec2.amazonaws.com' region = 'us-east-1' endpoint = 'https://ec2.amazonaws.com' request_parameters = 'Action=DescribeRegions&Version=2013-10-15' # Key derivation functions. See: # http://docs.aws.amazon.com/general/latest/gr/signature-v4-examples.html#signature-v4-examples-python def sign(key, msg): return hmac.new(key, msg.encode('utf-8'), hashlib.sha256).digest() def getSignatureKey(key, dateStamp, regionName, serviceName): kDate = sign(('AWS4' + key).encode('utf-8'), dateStamp) kRegion = sign(kDate, regionName) kService = sign(kRegion, serviceName) kSigning = sign(kService, 'aws4_request') return kSigning # Read AWS access key from env. variables or configuration file. Best practice is NOT # to embed credentials in code. access_key = os.environ.get('AWS_ACCESS_KEY_ID') secret_key = os.environ.get('AWS_SECRET_ACCESS_KEY') if access_key is None or secret_key is None: print('No access key is available.') sys.exit() # Create a date for headers and the credential string t = datetime.datetime.utcnow() amzdate = t.strftime('%Y%m%dT%H%M%SZ') datestamp = t.strftime('%Y%m%d') # Date w/o time, used in credential scope # ************* TASK 1: CREATE A CANONICAL REQUEST ************* # http://docs.aws.amazon.com/general/latest/gr/sigv4-create-canonical-request.html # Step 1 is to define the verb (GET, POST, etc.)--already done. # Step 2: Create canonical URI--the part of the URI from domain to query # string (use '/' if no path) canonical_uri = '/' # Step 3: Create the canonical query string. In this example (a GET request), # request parameters are in the query string. Query string values must # be URL-encoded (space=%20). The parameters must be sorted by name. # For this example, the query string is pre-formatted in the request_parameters variable. canonical_querystring = request_parameters # Step 4: Create the canonical headers and signed headers. Header names # must be trimmed and lowercase, and sorted in code point order from # low to high. Note that there is a trailing \n. canonical_headers = 'host:' + host + '\n' + 'x-amz-date:' + amzdate + '\n' # Step 5: Create the list of signed headers. This lists the headers # in the canonical_headers list, delimited with ";" and in alpha order. # Note: The request can include any headers; canonical_headers and # signed_headers lists those that you want to be included in the # hash of the request. "Host" and "x-amz-date" are always required. signed_headers = 'host;x-amz-date' # Step 6: Create payload hash (hash of the request body content). For GET # requests, the payload is an empty string (""). payload_hash = hashlib.sha256(('').encode('utf-8')).hexdigest() # Step 7: Combine elements to create canonical request canonical_request = method + '\n' + canonical_uri + '\n' + canonical_querystring + '\n' + canonical_headers + '\n' + signed_headers + '\n' + payload_hash # ************* TASK 2: CREATE THE STRING TO SIGN************* # Match the algorithm to the hashing algorithm you use, either SHA-1 or # SHA-256 (recommended) algorithm = 'AWS4-HMAC-SHA256' credential_scope = datestamp + '/' + region + '/' + service + '/' + 'aws4_request' string_to_sign = algorithm + '\n' + amzdate + '\n' + credential_scope + '\n' + hashlib.sha256(canonical_request.encode('utf-8')).hexdigest() # ************* TASK 3: CALCULATE THE SIGNATURE ************* # Create the signing key using the function defined above. signing_key = getSignatureKey(secret_key, datestamp, region, service) # Sign the string_to_sign using the signing_key signature = hmac.new(signing_key, (string_to_sign).encode('utf-8'), hashlib.sha256).hexdigest() # ************* TASK 4: ADD SIGNING INFORMATION TO THE REQUEST ************* # The signing information can be either in a query string value or in # a header named Authorization. This code shows how to use a header. # Create authorization header and add to request headers authorization_header = algorithm + ' ' + 'Credential=' + access_key + '/' + credential_scope + ', ' + 'SignedHeaders=' + signed_headers + ', ' + 'Signature=' + signature # The request can include any headers, but MUST include "host", "x-amz-date", # and (for this scenario) "Authorization". "host" and "x-amz-date" must # be included in the canonical_headers and signed_headers, as noted # earlier. Order here is not significant. # Python note: The 'host' header is added automatically by the Python 'requests' library. headers = {'x-amz-date':amzdate, 'Authorization':authorization_header} # ************* SEND THE REQUEST ************* request_url = endpoint + '?' + canonical_querystring print('\nBEGIN REQUEST++++++++++++++++++++++++++++++++++++') print('Request URL = ' + request_url) r = requests.get(request_url, headers=headers) print('\nRESPONSE++++++++++++++++++++++++++++++++++++') print('Response code: %d\n' % r.status_code) print(r.text)

POST 사용(Python)

다음 예에서는 Python용 SDK(Boto3) 없이 Amazon DynamoDB 쿼리 API를 사용하여 요청을 생성하는 방법을 보여줍니다. 이 요청에서는 POST 요청을 생성하고 요청 본문의 AWS에 값을 전달합니다. 인증 정보는 Authorization 요청 헤더를 사용하여 전달됩니다.

# Copyright 2010-2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. # # This file is licensed under the Apache License, Version 2.0 (the "License"). # You may not use this file except in compliance with the License. A copy of the # License is located at # # http://aws.amazon.com/apache2.0/ # # This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS # OF ANY KIND, either express or implied. See the License for the specific # language governing permissions and limitations under the License. # AWS Version 4 signing example # DynamoDB API (CreateTable) # See: http://docs.aws.amazon.com/general/latest/gr/sigv4_signing.html # This version makes a POST request and passes request parameters # in the body (payload) of the request. Auth information is passed in # an Authorization header. import sys, os, base64, datetime, hashlib, hmac import requests # pip install requests # ************* REQUEST VALUES ************* method = 'POST' service = 'dynamodb' host = 'dynamodb.us-west-2.amazonaws.com' region = 'us-west-2' endpoint = 'https://dynamodb.us-west-2.amazonaws.com/' # POST requests use a content type header. For DynamoDB, # the content is JSON. content_type = 'application/x-amz-json-1.0' # DynamoDB requires an x-amz-target header that has this format: # DynamoDB_<API version>.<operationName> amz_target = 'DynamoDB_20120810.CreateTable' # Request parameters for CreateTable--passed in a JSON block. request_parameters = '{' request_parameters += '"KeySchema": [{"KeyType": "HASH","AttributeName": "Id"}],' request_parameters += '"TableName": "TestTable","AttributeDefinitions": [{"AttributeName": "Id","AttributeType": "S"}],' request_parameters += '"ProvisionedThroughput": {"WriteCapacityUnits": 5,"ReadCapacityUnits": 5}' request_parameters += '}' # Key derivation functions. See: # http://docs.aws.amazon.com/general/latest/gr/signature-v4-examples.html#signature-v4-examples-python def sign(key, msg): return hmac.new(key, msg.encode("utf-8"), hashlib.sha256).digest() def getSignatureKey(key, date_stamp, regionName, serviceName): kDate = sign(('AWS4' + key).encode('utf-8'), date_stamp) kRegion = sign(kDate, regionName) kService = sign(kRegion, serviceName) kSigning = sign(kService, 'aws4_request') return kSigning # Read AWS access key from env. variables or configuration file. Best practice is NOT # to embed credentials in code. access_key = os.environ.get('AWS_ACCESS_KEY_ID') secret_key = os.environ.get('AWS_SECRET_ACCESS_KEY') if access_key is None or secret_key is None: print('No access key is available.') sys.exit() # Create a date for headers and the credential string t = datetime.datetime.utcnow() amz_date = t.strftime('%Y%m%dT%H%M%SZ') date_stamp = t.strftime('%Y%m%d') # Date w/o time, used in credential scope # ************* TASK 1: CREATE A CANONICAL REQUEST ************* # http://docs.aws.amazon.com/general/latest/gr/sigv4-create-canonical-request.html # Step 1 is to define the verb (GET, POST, etc.)--already done. # Step 2: Create canonical URI--the part of the URI from domain to query # string (use '/' if no path) canonical_uri = '/' ## Step 3: Create the canonical query string. In this example, request # parameters are passed in the body of the request and the query string # is blank. canonical_querystring = '' # Step 4: Create the canonical headers. Header names must be trimmed # and lowercase, and sorted in code point order from low to high. # Note that there is a trailing \n. canonical_headers = 'content-type:' + content_type + '\n' + 'host:' + host + '\n' + 'x-amz-date:' + amz_date + '\n' + 'x-amz-target:' + amz_target + '\n' # Step 5: Create the list of signed headers. This lists the headers # in the canonical_headers list, delimited with ";" and in alpha order. # Note: The request can include any headers; canonical_headers and # signed_headers include those that you want to be included in the # hash of the request. "Host" and "x-amz-date" are always required. # For DynamoDB, content-type and x-amz-target are also required. signed_headers = 'content-type;host;x-amz-date;x-amz-target' # Step 6: Create payload hash. In this example, the payload (body of # the request) contains the request parameters. payload_hash = hashlib.sha256(request_parameters.encode('utf-8')).hexdigest() # Step 7: Combine elements to create canonical request canonical_request = method + '\n' + canonical_uri + '\n' + canonical_querystring + '\n' + canonical_headers + '\n' + signed_headers + '\n' + payload_hash # ************* TASK 2: CREATE THE STRING TO SIGN************* # Match the algorithm to the hashing algorithm you use, either SHA-1 or # SHA-256 (recommended) algorithm = 'AWS4-HMAC-SHA256' credential_scope = date_stamp + '/' + region + '/' + service + '/' + 'aws4_request' string_to_sign = algorithm + '\n' + amz_date + '\n' + credential_scope + '\n' + hashlib.sha256(canonical_request.encode('utf-8')).hexdigest() # ************* TASK 3: CALCULATE THE SIGNATURE ************* # Create the signing key using the function defined above. signing_key = getSignatureKey(secret_key, date_stamp, region, service) # Sign the string_to_sign using the signing_key signature = hmac.new(signing_key, (string_to_sign).encode('utf-8'), hashlib.sha256).hexdigest() # ************* TASK 4: ADD SIGNING INFORMATION TO THE REQUEST ************* # Put the signature information in a header named Authorization. authorization_header = algorithm + ' ' + 'Credential=' + access_key + '/' + credential_scope + ', ' + 'SignedHeaders=' + signed_headers + ', ' + 'Signature=' + signature # For DynamoDB, the request can include any headers, but MUST include "host", "x-amz-date", # "x-amz-target", "content-type", and "Authorization". Except for the authorization # header, the headers must be included in the canonical_headers and signed_headers values, as # noted earlier. Order here is not significant. # # Python note: The 'host' header is added automatically by the Python 'requests' library. headers = {'Content-Type':content_type, 'X-Amz-Date':amz_date, 'X-Amz-Target':amz_target, 'Authorization':authorization_header} # ************* SEND THE REQUEST ************* print('\nBEGIN REQUEST++++++++++++++++++++++++++++++++++++') print('Request URL = ' + endpoint) r = requests.post(endpoint, data=request_parameters, headers=headers) print('\nRESPONSE++++++++++++++++++++++++++++++++++++') print('Response code: %d\n' % r.status_code) print(r.text)

쿼리 문자열의 인증 정보에 GET 사용(Python)

다음 예에서는 Python용 SDK(Boto3) 없이 IAM 쿼리 API를 사용하여 요청을 생성하는 방법을 보여줍니다. 이 요청에서는 GET 요청을 생성하고 쿼리 문자열을 사용하여 파라미터와 서명 정보를 전달합니다.

# Copyright 2010-2019 Amazon.com, Inc. or its affiliates. All Rights Reserved. # # This file is licensed under the Apache License, Version 2.0 (the "License"). # You may not use this file except in compliance with the License. A copy of the # License is located at # # http://aws.amazon.com/apache2.0/ # # This file is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS # OF ANY KIND, either express or implied. See the License for the specific # language governing permissions and limitations under the License. # # ABOUT THIS PYTHON SAMPLE: This sample is part of the AWS General Reference # Signing AWS API Requests top available at # https://docs.aws.amazon.com/general/latest/gr/sigv4-signed-request-examples.html # # AWS Version 4 signing example # IAM API (CreateUser) # See: http://docs.aws.amazon.com/general/latest/gr/sigv4_signing.html # This version makes a GET request and passes request parameters # and authorization information in the query string import sys, os, base64, datetime, hashlib, hmac, urllib import requests # pip install requests # ************* REQUEST VALUES ************* method = 'GET' service = 'iam' host = 'iam.amazonaws.com' region = 'us-east-1' endpoint = 'https://iam.amazonaws.com' # Key derivation functions. See: # http://docs.aws.amazon.com/general/latest/gr/signature-v4-examples.html#signature-v4-examples-python def sign(key, msg): return hmac.new(key, msg.encode('utf-8'), hashlib.sha256).digest() def getSignatureKey(key, dateStamp, regionName, serviceName): kDate = sign(('AWS4' + key).encode('utf-8'), dateStamp) kRegion = sign(kDate, regionName) kService = sign(kRegion, serviceName) kSigning = sign(kService, 'aws4_request') return kSigning # Read AWS access key from env. variables or configuration file. Best practice is NOT # to embed credentials in code. access_key = os.environ.get('AWS_ACCESS_KEY_ID') secret_key = os.environ.get('AWS_SECRET_ACCESS_KEY') if access_key is None or secret_key is None: print('No access key is available.') sys.exit() # Create a date for headers and the credential string t = datetime.datetime.utcnow() amz_date = t.strftime('%Y%m%dT%H%M%SZ') # Format date as YYYYMMDD'T'HHMMSS'Z' datestamp = t.strftime('%Y%m%d') # Date w/o time, used in credential scope # ************* TASK 1: CREATE A CANONICAL REQUEST ************* # http://docs.aws.amazon.com/general/latest/gr/sigv4-create-canonical-request.html # Because almost all information is being passed in the query string, # the order of these steps is slightly different than examples that # use an authorization header. # Step 1: Define the verb (GET, POST, etc.)--already done. # Step 2: Create canonical URI--the part of the URI from domain to query # string (use '/' if no path) canonical_uri = '/' # Step 3: Create the canonical headers and signed headers. Header names # must be trimmed and lowercase, and sorted in code point order from # low to high. Note trailing \n in canonical_headers. # signed_headers is the list of headers that are being included # as part of the signing process. For requests that use query strings, # only "host" is included in the signed headers. canonical_headers = 'host:' + host + '\n' signed_headers = 'host' # Match the algorithm to the hashing algorithm you use, either SHA-1 or # SHA-256 (recommended) algorithm = 'AWS4-HMAC-SHA256' credential_scope = datestamp + '/' + region + '/' + service + '/' + 'aws4_request' # Step 4: Create the canonical query string. In this example, request # parameters are in the query string. Query string values must # be URL-encoded (space=%20). The parameters must be sorted by name. # use urllib.parse.quote_plus() if using Python 3 canonical_querystring = 'Action=CreateUser&UserName=NewUser&Version=2010-05-08' canonical_querystring += '&X-Amz-Algorithm=AWS4-HMAC-SHA256' canonical_querystring += '&X-Amz-Credential=' + urllib.quote_plus(access_key + '/' + credential_scope) canonical_querystring += '&X-Amz-Date=' + amz_date canonical_querystring += '&X-Amz-Expires=30' canonical_querystring += '&X-Amz-SignedHeaders=' + signed_headers # Step 5: Create payload hash. For GET requests, the payload is an # empty string (""). payload_hash = hashlib.sha256(('').encode('utf-8')).hexdigest() # Step 6: Combine elements to create canonical request canonical_request = method + '\n' + canonical_uri + '\n' + canonical_querystring + '\n' + canonical_headers + '\n' + signed_headers + '\n' + payload_hash # ************* TASK 2: CREATE THE STRING TO SIGN************* string_to_sign = algorithm + '\n' + amz_date + '\n' + credential_scope + '\n' + hashlib.sha256(canonical_request.encode('utf-8')).hexdigest() # ************* TASK 3: CALCULATE THE SIGNATURE ************* # Create the signing key signing_key = getSignatureKey(secret_key, datestamp, region, service) # Sign the string_to_sign using the signing_key signature = hmac.new(signing_key, (string_to_sign).encode("utf-8"), hashlib.sha256).hexdigest() # ************* TASK 4: ADD SIGNING INFORMATION TO THE REQUEST ************* # The auth information can be either in a query string # value or in a header named Authorization. This code shows how to put # everything into a query string. canonical_querystring += '&X-Amz-Signature=' + signature # ************* SEND THE REQUEST ************* # The 'host' header is added automatically by the Python 'request' lib. But it # must exist as a header in the request. request_url = endpoint + "?" + canonical_querystring print('\nBEGIN REQUEST++++++++++++++++++++++++++++++++++++') print('Request URL = ' + request_url) r = requests.get(request_url) print('\nRESPONSE++++++++++++++++++++++++++++++++++++') print('Response code: %d\n' % r.status_code) print(r.text)