AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the Amazon Glacier ListJobs API operation.

Syntax

Get-GLCJobList
-VaultName <String>
-AccountId <String>
-Completed <Boolean>
-Statuscode <String>
-Limit <Int32>
-Marker <String>
-Select <String>
-PassThru <SwitchParameter>
-NoAutoIteration <SwitchParameter>

Description

This operation lists jobs for a vault, including jobs that are in-progress and jobs that have recently finished. The List Job operation returns a list of these jobs sorted by job initiation time. Amazon Glacier retains recently completed jobs for a period before deleting them; however, it eventually removes completed jobs. The output of completed jobs can be retrieved. Retaining completed jobs for a period of time after they have completed enables you to get a job output in the event you miss the job completion notification or your first attempt to download it fails. For example, suppose you start an archive retrieval job to download an archive. After the job completes, you start to download the archive but encounter a network error. In this scenario, you can retry and download the archive while the job exists. The List Jobs operation supports pagination. You should always check the response Marker field. If there are no more jobs to list, the Marker field is set to null. If there are more jobs to list, the Marker field is set to a non-null value, which you can use to continue the pagination of the list. To return a list of jobs that begins at a specific job, set the marker request parameter to the Marker value for that job that you obtained from a previous List Jobs request. You can set a maximum limit for the number of jobs returned in the response by specifying the limit parameter in the request. The default limit is 50. The number of jobs returned might be fewer than the limit, but the number of returned jobs never exceeds the limit. Additionally, you can filter the jobs list returned by specifying the optional statuscode parameter or completed parameter, or both. Using the statuscode parameter, you can specify to return only jobs that match either the InProgress, Succeeded, or Failed status. Using the completed parameter, you can specify to return only jobs that were completed (true) or jobs that were not completed (false). For more information about using this operation, see the documentation for the underlying REST API List Jobs.

This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration.

Parameters

-AccountId <String>
The AccountId value is the AWS account ID of the account that owns the vault. You can either specify an AWS account ID or optionally a single '-' (hyphen), in which case Amazon S3 Glacier uses the AWS account ID associated with the credentials used to sign the request. If you use an account ID, do not include any hyphens ('-') in the ID. If a value for this parameter is not specified the cmdlet will use a default value of '-'.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Completed <Boolean>
The state of the jobs to return. You can specify true or false.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Limit <Int32>
The maximum number of jobs to be returned. The default limit is 50. The number of jobs returned might be fewer than the specified limit, but the number of returned jobs never exceeds the limit.
Note: In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.If a value for this parameter is not specified the cmdlet will use a default value of '50'.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesMaxItems
-Marker <String>
An opaque string used for pagination. This value specifies the job at which the listing of jobs should begin. Get the marker value from a previous List Jobs response. You only need to include the marker if you are continuing the pagination of results started in a previous List Jobs request.
Note: This parameter is only used if you are manually controlling output pagination of the service API call.
In order to manually control output pagination, use '-Marker $null' for the first call and '-Marker $AWSHistory.LastServiceResponse.Marker' for subsequent calls.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesNextToken
-NoAutoIteration <SwitchParameter>
By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of Marker as the start point.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-PassThru <SwitchParameter>
Changes the cmdlet behavior to return the value passed to the VaultName parameter. The -PassThru parameter is deprecated, use -Select '^VaultName' instead. This parameter will be removed in a future version.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is 'JobList'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Glacier.Model.ListJobsResponse). Specifying the name of a property of type Amazon.Glacier.Model.ListJobsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Statuscode <String>
The type of job status to return. You can specify the following values: InProgress, Succeeded, or Failed.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-VaultName <String>
The name of the vault.
Required?True
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required? False
Position? Named
Accept pipeline input? True (ByPropertyName)
Aliases AK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required? False
Position? Named
Accept pipeline input? True (ByPropertyName)
-ProfileLocation <String>

Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)

If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials. Note that the encrypted credential file is not supported on all platforms. It will be skipped when searching for profiles on Windows Nano Server, Mac, and Linux platforms.

If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.

As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.

Required? False
Position? Named
Accept pipeline input? True (ByPropertyName)
Aliases AWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required? False
Position? Named
Accept pipeline input? True (ByPropertyName)
Aliases AWSProfileName, StoredCredentials
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required? False
Position? Named
Accept pipeline input? True (ByPropertyName)
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required? False
Position? Named
Accept pipeline input? True (ByPropertyName)
Aliases SecretAccessKey, SK
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required? False
Position? Named
Accept pipeline input? True (ByPropertyName)
Aliases ST
-Region <String>
The system name of the AWS region in which the operation should be invoked. For example, us-east-1, eu-west-1 etc.
Required? False
Position? Named
Accept pipeline input? True (ByPropertyName)
Aliases RegionToCall
-EndpointUrl <String>

The endpoint to make the call against.

Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.

Required? False
Position? Named
Accept pipeline input? True (ByPropertyName)

Inputs

You can pipe a String object to this cmdlet for the VaultName parameter.

Outputs

This cmdlet returns a collection of Amazon.Glacier.Model.GlacierJobDescription objects. The service call response (type Amazon.Glacier.Model.ListJobsResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.

Supported Version

AWS Tools for PowerShell: 2.x.y.z