Get-NMGRCoreNetworkRoutingInformationList Cmdlet

Amazon.PowerShell.Cmdlets.NMGR.AmazonNetworkManagerClientCmdlet.ClientConfig

BGP community values to match when filtering routing information. Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true.

The ID of the core network to retrieve routing information for.

The edge location to filter routing information by.

Exact AS path values to match when filtering routing information. Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true.

Exact prefix values to match when filtering routing information. Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true.

Local preference values to match when filtering routing information. Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true.

Filters routing information based on the longest prefix that matches each provided IP address. Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true.

The maximum number of routing information entries to return in a single page.
Note: In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.

Multi-Exit Discriminator (MED) values to match when filtering routing information. Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true.

Filters to apply based on next hop information. Each filter value must exactly match the corresponding next hop value. Values for the same filter are joined with OR, and different filters are joined with AND. The following filters are supported:

• core-network-attachment-id: The ID of the core network attachment for the next hop, for example attachment-0123456789abcdef0.
• segment-name: The name of the segment for the next hop.
• edge-location: The edge location for the next hop, for example us-east-1.
• resource-id: The ID of the resource for the next hop.
• resource-type: The type of resource for the next hop. The possible values are vpc, vpn, connect-peer, direct-connect-gateway, transit-gateway-route-table, attachment, and blackhole.
• ip-address: The IP address of the next hop. For a Site-to-Site VPN next hop, this is the outside IP address of the AWS side of the VPN tunnel. For a Connect peer next hop, this is the core network BGP address of the Connect peer. The value must be a single IPv4 or IPv6 address.

You can specify up to 10 filter values in total across NextHopFilters and the other match parameters in the request. Each filter value can be up to 256 characters. Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true.

The token for the next page of results.
Note: This parameter is only used if you are manually controlling output pagination of the service API call.
'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.

By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point.

The name of the segment to filter routing information by.

Use the -Select parameter to control the cmdlet output. The default value is 'CoreNetworkRoutingInformation'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.NetworkManager.Model.ListCoreNetworkRoutingInformationResponse). Specifying the name of a property of type Amazon.NetworkManager.Model.ListCoreNetworkRoutingInformationResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

Prefix values to filter routing information whose prefix is a subnet of the prefixes provided. Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true.

Prefix values to filter routing information whose prefix is a supernet of the prefixes provided. Starting with version 4 of the SDK this property will default to null. If no data for this property is returned from the service the property will also be null. This was changed to improve performance and allow the SDK and caller to distinguish between a property not set or a property being empty to clear out a value. To retain the previous SDK behavior set the AWSConfigs.InitializeCollections static property to true.

The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.

An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.

The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.

Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.

Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.

The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.

The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.

The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.

The session token if the access and secret keys are temporary session-based credentials.