AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the Amazon Route 53 ListResourceRecordSets API operation.

Syntax

Get-R53ResourceRecordSet
-HostedZoneId <String>
-StartRecordName <String>
-StartRecordType <RRType>
-StartRecordIdentifier <String>
-MaxItem <String>
-Select <String>
-PassThru <SwitchParameter>

Description

Lists the resource record sets in a specified hosted zone. ListResourceRecordSets returns up to 100 resource record sets at a time in ASCII order, beginning at a position specified by the name and type elements. Sort orderListResourceRecordSets sorts results first by DNS name with the labels reversed, for example: com.example.www. Note the trailing dot, which can change the sort order when the record name contains characters that appear before . (decimal 46) in the ASCII table. These characters include the following: ! " # $ % & ' ( ) * + , - When multiple records have the same DNS name, ListResourceRecordSets sorts results by the record type. Specifying where to start listing records You can use the name and type elements to specify the resource record set that the list begins with:
If you do not specify Name or Type
The results begin with the first resource record set that the hosted zone contains.
If you specify Name but not Type
The results begin with the first resource record set in the list whose name is greater than or equal to Name.
If you specify Type but not Name
Amazon Route 53 returns the InvalidInput error.
If you specify both Name and Type
The results begin with the first resource record set in the list whose name is greater than or equal to Name, and whose type is greater than or equal to Type.
Resource record sets that are PENDING This action returns the most current version of the records. This includes records that are PENDING, and that are not yet available on all Route 53 DNS servers. Changing resource record sets To ensure that you get an accurate listing of the resource record sets for a hosted zone at a point in time, do not submit a ChangeResourceRecordSets request while you're paging through the results of a ListResourceRecordSets request. If you do, some pages may display results without the latest changes while other pages display results with the latest changes. Displaying the next page of results If a ListResourceRecordSets command returns more than one page of results, the value of IsTruncated is true. To display the next page of results, get the values of NextRecordName, NextRecordType, and NextRecordIdentifier (if any) from the response. Then submit another ListResourceRecordSets request, and specify those values for StartRecordName, StartRecordType, and StartRecordIdentifier.

Parameters

-HostedZoneId <String>
The ID of the hosted zone that contains the resource record sets that you want to list.
Required?True
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)
AliasesId
-MaxItem <String>
(Optional) The maximum number of resource records sets to include in the response body for this request. If the response includes more than maxitems resource record sets, the value of the IsTruncated element in the response is true, and the values of the NextRecordName and NextRecordType elements in the response identify the first resource record set in the next group of maxitems resource record sets.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesMaxItems
-PassThru <SwitchParameter>
Changes the cmdlet behavior to return the value passed to the HostedZoneId parameter. The -PassThru parameter is deprecated, use -Select '^HostedZoneId' instead. This parameter will be removed in a future version.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is '*'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Route53.Model.ListResourceRecordSetsResponse). Specifying the name of a property of type Amazon.Route53.Model.ListResourceRecordSetsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-StartRecordIdentifier <String>
Resource record sets that have a routing policy other than simple: If results were truncated for a given DNS name and type, specify the value of NextRecordIdentifier from the previous response to get the next resource record set that has the current DNS name and type.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-StartRecordName <String>
The first name in the lexicographic ordering of resource record sets that you want to list. If the specified record name doesn't exist, the results begin with the first resource record set that has a name greater than the value of name.
Required?False
Position?2
Accept pipeline input?True (ByPropertyName)
-StartRecordType <RRType>
The type of resource record set to begin the record listing from.Valid values for basic resource record sets: A | AAAA | CAA | CNAME | MX | NAPTR | NS | PTR | SOA | SPF | SRV | TXTValues for weighted, latency, geolocation, and failover resource record sets: A | AAAA | CAA | CNAME | MX | NAPTR | PTR | SPF | SRV | TXTValues for alias resource record sets:
  • API Gateway custom regional API or edge-optimized API: A
  • CloudFront distribution: A or AAAA
  • Elastic Beanstalk environment that has a regionalized subdomain: A
  • Elastic Load Balancing load balancer: A | AAAA
  • S3 bucket: A
  • VPC interface VPC endpoint: A
  • Another resource record set in this hosted zone: The type of the resource record set that the alias references.
Constraint: Specifying type without specifying name returns an InvalidInput error.
Required?False
Position?3
Accept pipeline input?True (ByPropertyName)

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

Amazon.Route53.Model.ListResourceRecordSetsResponse
This cmdlet returns an Amazon.Route53.Model.ListResourceRecordSetsResponse object containing multiple properties. The object can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.
Developer Guide
Service API Reference
AWS Tools for PowerShell User Guide

Supported Version

AWS Tools for PowerShell: 2.x.y.z