AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the Amazon MTurk Service CreateHITWithHITType API operation.

Syntax

New-MTRHITWithHITType
-HITTypeId <String>
-HITLayoutId <String>
-HITLayoutParameter <HITLayoutParameter[]>
-LifetimeInSecond <Int64>
-MaxAssignment <Int32>
-AssignmentReviewPolicy_Parameter <PolicyParameter[]>
-HITReviewPolicy_Parameter <PolicyParameter[]>
-AssignmentReviewPolicy_PolicyName <String>
-HITReviewPolicy_PolicyName <String>
-Question <String>
-RequesterAnnotation <String>
-UniqueRequestToken <String>
-Select <String>
-PassThru <SwitchParameter>
-Force <SwitchParameter>

Description

The CreateHITWithHITType operation creates a new Human Intelligence Task (HIT) using an existing HITTypeID generated by the CreateHITType operation. This is an alternative way to create HITs from the CreateHIT operation. This is the recommended best practice for Requesters who are creating large numbers of HITs. CreateHITWithHITType also supports several ways to provide question data: by providing a value for the Question parameter that fully specifies the contents of the HIT, or by providing a HitLayoutId and associated HitLayoutParameters. If a HIT is created with 10 or more maximum assignments, there is an additional fee. For more information, see Amazon Mechanical Turk Pricing.

Parameters

-AssignmentReviewPolicy_Parameter <PolicyParameter[]>
Name of the parameter from the Review policy.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAssignmentReviewPolicy_Parameters
-AssignmentReviewPolicy_PolicyName <String>
Name of a Review Policy: SimplePlurality/2011-09-01 or ScoreMyKnownAnswers/2011-09-01
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-HITLayoutId <String>
The HITLayoutId allows you to use a pre-existing HIT design with placeholder values and create an additional HIT by providing those values as HITLayoutParameters. Constraints: Either a Question parameter or a HITLayoutId parameter must be provided.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-HITLayoutParameter <HITLayoutParameter[]>
If the HITLayoutId is provided, any placeholder values must be filled in with values using the HITLayoutParameter structure. For more information, see HITLayout.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesHITLayoutParameters
-HITReviewPolicy_Parameter <PolicyParameter[]>
Name of the parameter from the Review policy.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesHITReviewPolicy_Parameters
-HITReviewPolicy_PolicyName <String>
Name of a Review Policy: SimplePlurality/2011-09-01 or ScoreMyKnownAnswers/2011-09-01
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-HITTypeId <String>
The HIT type ID you want to create this HIT with.
Required?True
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)
-LifetimeInSecond <Int64>
An amount of time, in seconds, after which the HIT is no longer available for users to accept. After the lifetime of the HIT elapses, the HIT no longer appears in HIT searches, even if not all of the assignments for the HIT have been accepted.
Required?True
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesLifetimeInSeconds
-MaxAssignment <Int32>
The number of times the HIT can be accepted and completed before the HIT becomes unavailable.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesMaxAssignments
-PassThru <SwitchParameter>
Changes the cmdlet behavior to return the value passed to the HITTypeId parameter. The -PassThru parameter is deprecated, use -Select '^HITTypeId' instead. This parameter will be removed in a future version.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Question <String>
The data the person completing the HIT uses to produce the results. Constraints: Must be a QuestionForm data structure, an ExternalQuestion data structure, or an HTMLQuestion data structure. The XML question data must not be larger than 64 kilobytes (65,535 bytes) in size, including whitespace. Either a Question parameter or a HITLayoutId parameter must be provided.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-RequesterAnnotation <String>
An arbitrary data field. The RequesterAnnotation parameter lets your application attach arbitrary data to the HIT for tracking purposes. For example, this parameter could be an identifier internal to the Requester's application that corresponds with the HIT. The RequesterAnnotation parameter for a HIT is only visible to the Requester who created the HIT. It is not shown to the Worker, or any other Requester. The RequesterAnnotation parameter may be different for each HIT you submit. It does not affect how your HITs are grouped.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is 'HIT'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.MTurk.Model.CreateHITWithHITTypeResponse). Specifying the name of a property of type Amazon.MTurk.Model.CreateHITWithHITTypeResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-UniqueRequestToken <String>
A unique identifier for this request which allows you to retry the call on error without creating duplicate HITs. This is useful in cases such as network timeouts where it is unclear whether or not the call succeeded on the server. If the HIT already exists in the system from a previous call using the same UniqueRequestToken, subsequent calls will return a AWS.MechanicalTurk.HitAlreadyExists error with a message containing the HITId. Note: It is your responsibility to ensure uniqueness of the token. The unique token expires after 24 hours. Subsequent calls using the same UniqueRequestToken made after the 24 hour limit could create duplicate HITs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

This cmdlet returns an Amazon.MTurk.Model.HIT object. The service call response (type Amazon.MTurk.Model.CreateHITWithHITTypeResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.

Supported Version

AWS Tools for PowerShell: 2.x.y.z