AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the AWS WAF V2 CreateIPSet API operation.

Syntax

New-WAF2IPSet
-Name <String>
-Address <String[]>
-Description <String>
-IPAddressVersion <IPAddressVersion>
-Scope <Scope>
-Tag <Tag[]>
-Select <String>
-PassThru <SwitchParameter>
-Force <SwitchParameter>

Description

Creates an IPSet, which you use to identify web requests that originate from specific IP addresses or ranges of IP addresses. For example, if you're receiving a lot of requests from a ranges of IP addresses, you can configure WAF to block them using an IPSet that lists those IP addresses.

Parameters

-Address <String[]>
Contains an array of strings that specify one or more IP addresses or blocks of IP addresses in Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0. Examples:
  • To configure WAF to allow, block, or count requests that originated from the IP address 192.0.2.44, specify 192.0.2.44/32.
  • To configure WAF to allow, block, or count requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.
  • To configure WAF to allow, block, or count requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify 1111:0000:0000:0000:0000:0000:0000:0111/128.
  • To configure WAF to allow, block, or count requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify 1111:0000:0000:0000:0000:0000:0000:0000/64.
For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.
Required?True
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAddresses
-Description <String>
A description of the IP set that helps with identification.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Force <SwitchParameter>
This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-IPAddressVersion <IPAddressVersion>
The version of the IP addresses, either IPV4 or IPV6.
Required?True
Position?Named
Accept pipeline input?True (ByPropertyName)
-Name <String>
The name of the IP set. You cannot change the name of an IPSet after you create it.
Required?True
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)
-PassThru <SwitchParameter>
Changes the cmdlet behavior to return the value passed to the Name parameter. The -PassThru parameter is deprecated, use -Select '^Name' instead. This parameter will be removed in a future version.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Scope <Scope>
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, or an AppSync GraphQL API. To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
  • CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.
  • API and SDKs - For all calls, use the Region endpoint us-east-1.
Required?True
Position?Named
Accept pipeline input?True (ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is 'Summary'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WAFV2.Model.CreateIPSetResponse). Specifying the name of a property of type Amazon.WAFV2.Model.CreateIPSetResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Tag <Tag[]>
An array of key:value pairs to associate with the resource.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesTags

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

Amazon.WAFV2.Model.IPSetSummary or Amazon.WAFV2.Model.CreateIPSetResponse
This cmdlet returns an Amazon.WAFV2.Model.IPSetSummary object. The service call response (type Amazon.WAFV2.Model.CreateIPSetResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.
AWS Tools for PowerShell User Guide

Supported Version

AWS Tools for PowerShell: 2.x.y.z