AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the AWS WAF V2 UpdateIPSet API operation.

Syntax

Update-WAF2IPSet
-Id <String>
-Address <String[]>
-Description <String>
-IsAddressesSet <Boolean>
-LockToken <String>
-Name <String>
-Scope <Scope>
-Select <String>
-PassThru <SwitchParameter>
-Force <SwitchParameter>
-ClientConfig <AmazonWAFV2Config>

Description

Updates the specified IPSet. This operation completely replaces the mutable specifications that you already have for the IP set with the ones that you provide to this call. To modify an IP set, do the following:
  1. Retrieve it by calling GetIPSet
  2. Update its settings as needed
  3. Provide the complete IP set specification to this call
Temporary inconsistencies during updates When you create or change a web ACL or other WAF resources, the changes take a small amount of time to propagate to all areas where the resources are stored. The propagation time can be from a few seconds to a number of minutes. The following are examples of the temporary inconsistencies that you might notice during change propagation:
  • After you create a web ACL, if you try to associate it with a resource, you might get an exception indicating that the web ACL is unavailable.
  • After you add a rule group to a web ACL, the new rule group rules might be in effect in one area where the web ACL is used and not in another.
  • After you change a rule action setting, you might see the old action in some places and the new action in others.
  • After you add an IP address to an IP set that is in use in a blocking rule, the new address might be blocked in one area while still allowed in another.

Parameters

-Address <String[]>
Contains an array of strings that specifies zero or more IP addresses or blocks of IP addresses that you want WAF to inspect for in incoming requests. All addresses must be specified using Classless Inter-Domain Routing (CIDR) notation. WAF supports all IPv4 and IPv6 CIDR ranges except for /0. Example address strings:
  • For requests that originated from the IP address 192.0.2.44, specify 192.0.2.44/32.
  • For requests that originated from IP addresses from 192.0.2.0 to 192.0.2.255, specify 192.0.2.0/24.
  • For requests that originated from the IP address 1111:0000:0000:0000:0000:0000:0000:0111, specify 1111:0000:0000:0000:0000:0000:0000:0111/128.
  • For requests that originated from IP addresses 1111:0000:0000:0000:0000:0000:0000:0000 to 1111:0000:0000:0000:ffff:ffff:ffff:ffff, specify 1111:0000:0000:0000:0000:0000:0000:0000/64.
For more information about CIDR notation, see the Wikipedia entry Classless Inter-Domain Routing.Example JSON Addresses specifications:
  • Empty array: "Addresses": []
  • Array with one address: "Addresses": ["192.0.2.44/32"]
  • Array with three addresses: "Addresses": ["192.0.2.44/32", "192.0.2.0/24", "192.0.0.0/16"]
  • INVALID specification: "Addresses": [""] INVALID
Required?True
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAddresses
-ClientConfig <AmazonWAFV2Config>
Amazon.PowerShell.Cmdlets.WAF2.AmazonWAFV2ClientCmdlet.ClientConfig
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Description <String>
A description of the IP set that helps with identification.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Force <SwitchParameter>
This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Id <String>
A unique identifier for the set. This ID is returned in the responses to create and list commands. You provide it to operations like update and delete.
Required?True
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)
-IsAddressesSet <Boolean>
This property is set to true if the property is set; false otherwise. This property can be used to determine if the related property was returned by a service response or if the related property should be sent to the service during a service call.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-LockToken <String>
A token used for optimistic locking. WAF returns a token to your get and list requests, to mark the state of the entity at the time of the request. To make changes to the entity associated with the token, you provide the token to operations like update and delete. WAF uses the token to ensure that no changes have been made to the entity since you last retrieved it. If a change has been made, the update fails with a WAFOptimisticLockException. If this happens, perform another get, and use the new token returned by that operation.
Required?True
Position?Named
Accept pipeline input?True (ByPropertyName)
-Name <String>
The name of the IP set. You cannot change the name of an IPSet after you create it.
Required?True
Position?Named
Accept pipeline input?True (ByPropertyName)
-PassThru <SwitchParameter>
Changes the cmdlet behavior to return the value passed to the Id parameter. The -PassThru parameter is deprecated, use -Select '^Id' instead. This parameter will be removed in a future version.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Scope <Scope>
Specifies whether this is for an Amazon CloudFront distribution or for a regional application. A regional application can be an Application Load Balancer (ALB), an Amazon API Gateway REST API, an AppSync GraphQL API, an Amazon Cognito user pool, an App Runner service, or an Amazon Web Services Verified Access instance. To work with CloudFront, you must also specify the Region US East (N. Virginia) as follows:
  • CLI - Specify the Region when you use the CloudFront scope: --scope=CLOUDFRONT --region=us-east-1.
  • API and SDKs - For all calls, use the Region endpoint us-east-1.
Required?True
Position?Named
Accept pipeline input?True (ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is 'NextLockToken'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.WAFV2.Model.UpdateIPSetResponse). Specifying the name of a property of type Amazon.WAFV2.Model.UpdateIPSetResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

System.String or Amazon.WAFV2.Model.UpdateIPSetResponse
This cmdlet returns a System.String object. The service call response (type Amazon.WAFV2.Model.UpdateIPSetResponse) can also be referenced from properties attached to the cmdlet entry in the $AWSHistory stack.
AWS Tools for PowerShell User Guide

Supported Version

AWS Tools for PowerShell: 2.x.y.z