Update-TFRConnector Cmdlet

Connectors are used to send files using either the AS2 or SFTP protocol. For the access role, provide the Amazon Resource Name (ARN) of the Identity and Access Management role to use.For AS2 connectorsWith AS2, you can send files by calling StartFileTransfer and specifying the file paths in the request parameter, SendFilePaths. We use the file’s parent directory (for example, for --send-file-paths /bucket/dir/file.txt, parent directory is /bucket/dir/) to temporarily store a processed AS2 message file, store the MDN when we receive them from the partner, and write a final JSON file containing relevant metadata of the transmission. So, the AccessRole needs to provide read and write access to the parent directory of the file location used in the StartFileTransfer request. Additionally, you need to provide read and write access to the parent directory of the files that you intend to send with StartFileTransfer.If you are using Basic authentication for your AS2 connector, the access role requires the secretsmanager:GetSecretValue permission for the secret. If the secret is encrypted using a customer-managed key instead of the Amazon Web Services managed key in Secrets Manager, then the role also needs the kms:Decrypt permission for that key.For SFTP connectorsMake sure that the access role provides read and write access to the parent directory of the file location that's used in the StartFileTransfer request. Additionally, make sure that the role provides secretsmanager:GetSecretValue permission to Secrets Manager.

Provides Basic authentication support to the AS2 Connectors API. To use Basic authentication, you must provide the name or Amazon Resource Name (ARN) of a secret in Secrets Manager.The default value for this parameter is null, which indicates that Basic authentication is not enabled for the connector.If the connector should use Basic authentication, the secret needs to be in the following format:{ "Username": "user-name", "Password": "user-password" }Replace user-name and user-password with the credentials for the actual user that is being authenticated.Note the following:

• You are storing these credentials in Secrets Manager, not passing them directly into this API.
• If you are using the API, SDKs, or CloudFormation to configure your connector, then you must create the secret before you can enable Basic authentication. However, if you are using the Amazon Web Services management console, you can have the system create the secret for you.

If you have previously enabled Basic authentication for a connector, you can disable it by using the UpdateConnector API call. For example, if you are using the CLI, you can run the following command to remove Basic authentication:update-connector --connector-id my-connector-id --as2-config 'BasicAuthSecretId=""'

Specifies whether the AS2 file is compressed.

The algorithm that is used to encrypt the file.Note the following:

• Do not use the DES_EDE3_CBC algorithm unless you must support a legacy client that requires it, as it is a weak encryption algorithm.
• You can only specify NONE if the URL for your connector uses HTTPS. Using HTTPS ensures that no traffic is sent in clear text.

A unique identifier for the AS2 local profile.

Used for outbound requests (from an Transfer Family connector to a partner AS2 server) to determine whether the partner response for transfers is synchronous or asynchronous. Specify either of the following values:

• SYNC: The system expects a synchronous MDN response, confirming that the file was transferred successfully (or not).
• NONE: Specifies that no MDN response is required.

The signing algorithm for the MDN response.If set to DEFAULT (or not set at all), the value for SigningAlgorithm is used.

Used as the Subject HTTP header attribute in AS2 messages that are being sent with the connector.

A unique identifier for the partner profile for the connector.

Allows you to use the Amazon S3 Content-Type that is associated with objects in S3 instead of having the content type mapped based on the file extension. This parameter is enabled by default when you create an AS2 connector from the console, but disabled by default when you create an AS2 connector by calling the API directly.

The algorithm that is used to sign the AS2 messages sent with the connector.

Amazon.PowerShell.Cmdlets.TFR.AmazonTransferClientCmdlet.ClientConfig

The unique identifier for the connector.

This parameter overrides confirmation prompts to force the cmdlet to continue its operation. This parameter should always be used with caution.

The Amazon Resource Name (ARN) of the Identity and Access Management (IAM) role that allows a connector to turn on CloudWatch logging for Amazon S3 events. When set, you can view connector activity in your CloudWatch logs.

Changes the cmdlet behavior to return the value passed to the ConnectorId parameter. The -PassThru parameter is deprecated, use -Select '^ConnectorId' instead. This parameter will be removed in a future version.

Specifies the name of the security policy for the connector.

Use the -Select parameter to control the cmdlet output. The default value is 'ConnectorId'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.Transfer.Model.UpdateConnectorResponse). Specifying the name of a property of type Amazon.Transfer.Model.UpdateConnectorResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.

Specify the number of concurrent connections that your connector creates to the remote server. The default value is 1. The maximum values is 5.If you are using the Amazon Web Services Management Console, the default value is 5.This parameter specifies the number of active connections that your connector can establish with the remote server at the same time. Increasing this value can enhance connector performance when transferring large file batches by enabling parallel operations.

The public portion of the host key, or keys, that are used to identify the external server to which you are connecting. You can use the ssh-keyscan command against the SFTP server to retrieve the necessary key.TrustedHostKeys is optional for CreateConnector. If not provided, you can use TestConnection to retrieve the server host key during the initial connection attempt, and subsequently update the connector with the observed host key.When creating connectors with egress config (VPC_LATTICE type connectors), since host name is not something we can verify, the only accepted trusted host key format is key-type key-body without the host name. For example: ssh-rsa AAAAB3Nza...<long-string-for-public-key>The three standard SSH public key format elements are <key type>, <body base64>, and an optional <comment>, with spaces between each element. Specify only the <key type> and <body base64>: do not enter the <comment> portion of the key.For the trusted host key, Transfer Family accepts RSA and ECDSA keys.

• For RSA keys, the <key type> string is ssh-rsa.
• For ECDSA keys, the <key type> string is either ecdsa-sha2-nistp256, ecdsa-sha2-nistp384, or ecdsa-sha2-nistp521, depending on the size of the key you generated.

Run this command to retrieve the SFTP server host key, where your SFTP server name is ftp.host.com.ssh-keyscan ftp.host.comThis prints the public host key to standard output.ftp.host.com ssh-rsa AAAAB3Nza...<long-string-for-public-key>Copy and paste this string into the TrustedHostKeys field for the create-connector command or into the Trusted host keys field in the console.For VPC Lattice type connectors (VPC_LATTICE), remove the hostname from the key and use only the key-type key-body format. In this example, it should be: ssh-rsa AAAAB3Nza...<long-string-for-public-key>

The identifier for the secret (in Amazon Web Services Secrets Manager) that contains the SFTP user's private key, password, or both. The identifier must be the Amazon Resource Name (ARN) of the secret.

• Required when creating an SFTP connector
• Optional when updating an existing SFTP connector

The URL of the partner's AS2 or SFTP endpoint.When creating AS2 connectors or service-managed SFTP connectors (connectors without egress configuration), you must provide a URL to specify the remote server endpoint. For VPC Lattice type connectors, the URL must be null.

Updated port number for SFTP connections through VPC_LATTICE. Change this if the target SFTP server port has been modified or if connecting to a different server endpoint.

Updated ARN of the VPC_LATTICE Resource Configuration. Use this to change the target SFTP server location or modify the network path through the customer's VPC infrastructure.

The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.

An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.

The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.

Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.

Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.

The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.

The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.

The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.

The session token if the access and secret keys are temporary session-based credentials.