AWS Tools for Windows PowerShell
Command Reference

AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.

Synopsis

Calls the Amazon S3 Control ListAccessPoints API operation.

Syntax

Get-S3CAccessPointList
-AccountId <String>
-Bucket <String>
-DataSourceId <String>
-DataSourceType <String>
-MaxResult <Int32>
-NextToken <String>
-Select <String>
-NoAutoIteration <SwitchParameter>
-ClientConfig <AmazonS3ControlConfig>

Description

This operation is not supported by directory buckets. Returns a list of the access points. You can retrieve up to 1,000 access points per call. If the call returns more than 1,000 access points (or the number specified in maxResults, whichever is less), the response will include a continuation token that you can use to list the additional access points. Returns only access points attached to S3 buckets by default. To return all access points specify DataSourceType as ALL. All Amazon S3 on Outposts REST API requests for this action require an additional parameter of x-amz-outpost-id to be passed with the request. In addition, you must use an S3 on Outposts endpoint hostname prefix instead of s3-control. For an example of the request syntax for Amazon S3 on Outposts that uses the S3 on Outposts endpoint hostname prefix and the x-amz-outpost-id derived by using the access point ARN, see the Examples section. The following actions are related to ListAccessPoints: You must URL encode any signed header values that contain spaces. For example, if your header value is my file.txt, containing two spaces after my, you must URL encode this value to my%20%20file.txt.

This cmdlet automatically pages all available results to the pipeline - parameters related to iteration are only needed if you want to manually control the paginated output. To disable autopagination, use -NoAutoIteration. This cmdlet didn't autopaginate in V4, auto-pagination support was added in V5.

Parameters

-AccountId <String>
The Amazon Web Services account ID for the account that owns the specified access points.
Required?True
Position?1
Accept pipeline input?True (ByValue, ByPropertyName)
-Bucket <String>
The name of the bucket whose associated access points you want to list.For using this parameter with Amazon S3 on Outposts with the REST API, you must specify the name and the x-amz-outpost-id as well.For using this parameter with S3 on Outposts with the Amazon Web Services SDK and CLI, you must specify the ARN of the bucket accessed in the format arn:aws:s3-outposts:<Region>:<account-id>:outpost/<outpost-id>/bucket/<my-bucket-name>. For example, to access the bucket reports through Outpost my-outpost owned by account 123456789012 in Region us-west-2, use the URL encoding of arn:aws:s3-outposts:us-west-2:123456789012:outpost/my-outpost/bucket/reports. The value must be URL encoded.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-ClientConfig <AmazonS3ControlConfig>
Amazon.PowerShell.Cmdlets.S3C.AmazonS3ControlClientCmdlet.ClientConfig
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-DataSourceId <String>
The unique identifier for the data source of the access point.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-DataSourceType <String>
The type of the data source that the access point is attached to. Returns only access points attached to S3 buckets by default. To return all access points specify DataSourceType as ALL.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-MaxResult <Int32>
The maximum number of access points that you want to include in the list. If the specified bucket has more than this number of access points, then the response will include a continuation token in the NextToken field that you can use to retrieve the next page of access points.
Note: In AWSPowerShell and AWSPowerShell.NetCore this parameter is used to limit the total number of items returned by the cmdlet.
In AWS.Tools this parameter is simply passed to the service to specify how many items should be returned by each service call.
Pipe the output of this cmdlet into Select-Object -First to terminate retrieving data pages early and control the number of items returned.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesMaxItems, MaxResults
-NextToken <String>
A continuation token. If a previous call to ListAccessPoints returned a continuation token in the NextToken field, then providing that value here causes Amazon S3 to retrieve the next page of results.
Note: This parameter is only used if you are manually controlling output pagination of the service API call.
'NextToken' is only returned by the cmdlet when '-Select *' is specified. In order to manually control output pagination, set '-NextToken' to null for the first call then set the 'NextToken' using the same property output from the previous call for subsequent calls.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NoAutoIteration <SwitchParameter>
By default the cmdlet will auto-iterate and retrieve all results to the pipeline by performing multiple service calls. If set, the cmdlet will retrieve only the next 'page' of results using the value of NextToken as the start point. This cmdlet didn't autopaginate in V4. To preserve the V4 autopagination behavior for all cmdlets, run Set-AWSAutoIterationMode -IterationMode v4.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-Select <String>
Use the -Select parameter to control the cmdlet output. The default value is 'AccessPointList'. Specifying -Select '*' will result in the cmdlet returning the whole service response (Amazon.S3Control.Model.ListAccessPointsResponse). Specifying the name of a property of type Amazon.S3Control.Model.ListAccessPointsResponse will result in that property being returned. Specifying -Select '^ParameterName' will result in the cmdlet returning the selected cmdlet parameter value.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)

Common Credential and Region Parameters

-AccessKey <String>
The AWS access key for the user account. This can be a temporary access key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAK
-Credential <AWSCredentials>
An AWSCredentials object instance containing access and secret key information, and optionally a token for session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-EndpointUrl <String>
The endpoint to make the call against.Note: This parameter is primarily for internal AWS use and is not required/should not be specified for normal usage. The cmdlets normally determine which endpoint to call based on the region specified to the -Region parameter or set as default in the shell (via Set-DefaultAWSRegion). Only specify this parameter if you must direct the call to a specific custom endpoint.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
-NetworkCredential <PSCredential>
Used with SAML-based authentication when ProfileName references a SAML role profile. Contains the network credentials to be supplied during authentication with the configured identity provider's endpoint. This parameter is not required if the user's default network identity can or should be used during authentication.
Required?False
Position?Named
Accept pipeline input?True (ByValue, ByPropertyName)
-ProfileLocation <String>
Used to specify the name and location of the ini-format credential file (shared with the AWS CLI and other AWS SDKs)If this optional parameter is omitted this cmdlet will search the encrypted credential file used by the AWS SDK for .NET and AWS Toolkit for Visual Studio first. If the profile is not found then the cmdlet will search in the ini-format credential file at the default location: (user's home directory)\.aws\credentials.If this parameter is specified then this cmdlet will only search the ini-format credential file at the location given.As the current folder can vary in a shell or during script execution it is advised that you use specify a fully qualified path instead of a relative path.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesAWSProfilesLocation, ProfilesLocation
-ProfileName <String>
The user-defined name of an AWS credentials or SAML-based role profile containing credential information. The profile is expected to be found in the secure credential file shared with the AWS SDK for .NET and AWS Toolkit for Visual Studio. You can also specify the name of a profile stored in the .ini-format credential file used with the AWS CLI and other AWS SDKs.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesStoredCredentials, AWSProfileName
-Region <Object>
The system name of an AWS region or an AWSRegion instance. This governs the endpoint that will be used when calling service operations. Note that the AWS resources referenced in a call are usually region-specific.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesRegionToCall
-SecretKey <String>
The AWS secret key for the user account. This can be a temporary secret key if the corresponding session token is supplied to the -SessionToken parameter.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesSK, SecretAccessKey
-SessionToken <String>
The session token if the access and secret keys are temporary session-based credentials.
Required?False
Position?Named
Accept pipeline input?True (ByPropertyName)
AliasesST

Outputs

Amazon.S3Control.Model.AccessPoint or Amazon.S3Control.Model.ListAccessPointsResponse
This cmdlet returns a collection of Amazon.S3Control.Model.AccessPoint objects. The service call response (type Amazon.S3Control.Model.ListAccessPointsResponse) can be returned by specifying '-Select *'.
AWS Tools for PowerShell User Guide

Supported Version

AWS Tools for PowerShell: 2.x.y.z