SapNWOnHanaMulti

The following are examples of the specifications required to create multi-node deployments.

Multi-node deployment with HANA database software and infrastructure resources for all SAP components without installing SAP software:


{
  "KeyPairName": "ExampleKeyPair",
  "VpcId": "vpc-a1b2c3d4",
  "AvailabilityZone1PrivateSubnet1Id": "subnet-11111111aaaaaaaaa",
  "AvailabilityZone1PrivateSubnet2Id": "subnet-11111111bbbbbbbbb",
  "Timezone" :"PST",
  "EnableEbsVolumeEncryption" :"Yes",
  "EbsKmsKeyArn" : "arn:aws:kms:us-east-1:111122223333:alias/aws/ebs",
  "CreateSecurityGroup" :"No",
  "DatabaseSecurityGroupId" :"sg-1234567890abcdef0",
  "ApplicationSecurityGroupId" :"sg-021345abcdef6789",
  "SidAdmUserId" :"7002",
  "SapSysGroupId" :"5001",
  "DatabaseSystemId" :"HYD",
  "SapSid" :"S4K",
  "DatabaseInstanceNumber" :"30",
  "InstallAwsBackintAgent" :"Yes",
  "BackintSpecifications": "{\"backintBucketName\":\"launchwizardsoftware\",\"backintBucketFolder\":\"HANABackintBucketFolder\",\"backintBucketRegion\":\"us-east-1\",\"backintKmsKeyArn\":\"arn:aws:kms:us-east-1:111122223333:alias/aws/s3\",\"backintAgentVersion\":\"2.0.2.732\",\"backintContinueOnFailure\":\"No\",\"backintCreateEbsVolume\":\"Yes\"}",
  "PasOperatingSystem" :"SuSE-Linux-15-SP2-For-SAP-HVM",
  "PasAmiId" :"ami-1234567890abcdef0",
  "PasAutomaticRecovery" :"No",
  "PasInstanceType" :"r5.2xlarge",
  "PasHostname" :"pass4123",
  "InstallAas" :"Yes",
  "AasHostCount" :"2",
  "AasAutomaticRecovery" :"Yes",
  "AasInstanceType" :"r5.2xlarge",
  "AasHostnames" :"aas4123,aas4124",
  "DatabaseOperatingSystem" :"SuSE-Linux-15-SP2-For-SAP-HVM",
  "DatabaseAmiId" :"ami-1234567890abcdef0",
  "DatabaseInstanceType" :"r5.8xlarge",
  "DatabaseHostCount" :"2",
  "DatabasePrimaryHostname" :"db123",
  "DatabaseSubordinateHostnames" :"subhan1,subhana2",
  "SapPassword" :"EXAMPLE-PASSWORD",
  "InstallSap":"No",
  "InstallDatabaseSoftware" :"Yes",
  "DatabaseInstallationMediaS3Uri" :"s3://launchwizardsoftware/sapmedia/database/hana-20-sp06-rev60",
  "SetupTransportDomainController" :"No",
  "SnsTopicArn" :"arn:aws:sns:us-east-1:111122223333:InstallStatus",
  "SaveDeploymentArtifacts" :"Yes",
  "DeploymentArtifactsS3Uri" :"s3://launchwizardsoftware",
  "DisableDeploymentRollback" :"Yes",
  "ApplicationDataVolumeType": "gp3",    
  "DatabaseLogVolumeType": "gp3", 
  "DatabaseAutomaticRecovery": "Yes"
}

Show less

Multi-node deployment with resources for all SAP components without SAP software installed:


{
  "KeyPairName": "ExampleKeyPair",
  "VpcId": "vpc-a1b2c3d4",
  "AvailabilityZone1PrivateSubnet1Id": "subnet-11111111aaaaaaaaa",
  "AvailabilityZone1PrivateSubnet2Id": "subnet-11111111bbbbbbbbb",
  "Timezone" :"PST",
  "EnableEbsVolumeEncryption" :"Yes",
  "EbsKmsKeyArn" : "arn:aws:kms:us-east-1:111122223333:alias/aws/ebs",
  "CreateSecurityGroup" :"No",
  "DatabaseSecurityGroupId" :"sg-1234567890abcdef0",
  "ApplicationSecurityGroupId" :"sg-021345abcdef6789",
  "SidAdmUserId" :"7002",
  "SapSysGroupId" :"5001",
  "DatabaseSystemId" :"HYD",
  "SapSid" :"S4K",
  "DatabaseInstanceNumber" :"30",
  "PasOperatingSystem" :"SuSE-Linux-15-SP2-For-SAP-HVM",
  "PasAmiId" :"ami-1234567890abcdef0",
  "PasAutomaticRecovery" :"No",
  "PasInstanceType" :"r5.2xlarge",
  "PasHostname" :"pass4123",
  "InstallAas" :"Yes",
  "AasHostCount" :"2",
  "AasAutomaticRecovery" :"Yes",
  "AasInstanceType" :"r5.2xlarge",
  "AasHostnames" :"aas4123,aas4124",
  "DatabaseOperatingSystem" :"SuSE-Linux-15-SP2-For-SAP-HVM",
  "DatabaseAmiId" :"ami-1234567890abcdef0",
  "DatabaseInstanceType" :"r5.8xlarge",
  "DatabaseHostCount" :"2",
  "DatabasePrimaryHostname" :"aas4123",
  "DatabaseSubordinateHostnames" :"subhan1,subhana2",
  "SapPassword" :"EXAMPLE-PASSWORD",
  "InstallSap":"No",
  "InstallDatabaseSoftware" :"No",
  "InstallAwsBackintAgent" :"No",
  "SetupTransportDomainController" :"No",
  "SnsTopicArn" :"arn:aws:sns:us-east-1:111122223333:InstallStatus",
  "SaveDeploymentArtifacts" :"Yes",
  "DeploymentArtifactsS3Uri" :"s3://launchwizardsoftware",
  "DisableDeploymentRollback" :"Yes",  
  "ApplicationDataVolumeType": "gp3",    
  "DatabaseLogVolumeType": "gp3", 
  "DatabaseAutomaticRecovery": "Yes"
}

Show less

Multi-node deployment with SAP software installed:


{
  "KeyPairName": "ExampleKeyPair",
  "VpcId": "vpc-a1b2c3d4",
  "AvailabilityZone1PrivateSubnet1Id": "subnet-11111111aaaaaaaaa",
  "AvailabilityZone1PrivateSubnet2Id": "subnet-11111111bbbbbbbbb",
  "Timezone" :"PST",
  "EnableEbsVolumeEncryption" :"Yes",
  "EbsKmsKeyArn" : "arn:aws:kms:us-east-1:111122223333:alias/aws/ebs",
  "CreateSecurityGroup" :"No",
  "DatabaseSecurityGroupId" :"sg-1234567890abcdef0",
  "ApplicationSecurityGroupId" :"sg-021345abcdef6789",
  "SidAdmUserId" :"7002",
  "SapSysGroupId" :"5001",
  "DatabaseSystemId" :"HYD",
  "SapSid" :"S4K",
  "DatabaseInstanceNumber" :"30",
  "InstallAwsBackintAgent" :"Yes",
  "BackintSpecifications": "{\"backintBucketName\":\"launchwizardsoftware\",\"backintBucketFolder\":\"HANABackintBucketFolder\",\"backintBucketRegion\":\"us-east-1\",\"backintKmsKeyArn\":\"arn:aws:kms:us-east-1:111122223333:alias/aws/s3\",\"backintAgentVersion\":\"2.0.2.732\",\"backintContinueOnFailure\":\"No\",\"backintCreateEbsVolume\":\"Yes\"}",
  "PasOperatingSystem" :"SuSE-Linux-15-SP2-For-SAP-HVM",
  "PasAmiId" :"ami-1234567890abcdef0",
  "PasAutomaticRecovery" :"No",
  "PasInstanceType" :"r5.2xlarge",
  "PasHostname" :"pass4123",
  "InstallAas" :"Yes",
  "AasHostCount" :"2",
  "AasAutomaticRecovery" :"Yes",
  "AasInstanceType" :"r5.2xlarge",
  "AasHostnames" :"aas4123,aas4124",
  "DatabaseOperatingSystem" :"SuSE-Linux-15-SP2-For-SAP-HVM",
  "DatabaseAmiId" :"ami-1234567890abcdef0",
  "DatabaseInstanceType" :"r5.8xlarge",
  "DatabaseHostCount" :"2",
  "DatabasePrimaryHostname" :"aas4123",
  "DatabaseSubordinateHostnames" :"subhan1,subhana2",
  "SapPassword" :"EXAMPLE-PASSWORD",
  "InstallSap":"Yes",
  "SetupTransportDomainController" :"No",
  "SapInstallationSpecifications": "{\"parameters\":{\"PRODUCT_ID\":\"saps4hana-2021\",\"HDB_SCHEMA_NAME\":\"SAPABAP1\",\"CI_INSTANCE_NR\":\"22\",\"ASCS_INSTANCE_NR\":\"20\",\"SAPINST_CD_SAPCAR\":\"s3:\/\/launchwizardsoftware\/sapmedia\/sapcar\",\"SAPINST_CD_SWPM\":\"s3:\/\/launchwizardsoftware\/sapmedia\/swpm\/20-sp10\",\"SAPINST_CD_KERNEL\":\"s3:\/\/launchwizardsoftware\/sapmedia\/kernel\/785\",\"SAPINST_CD_LOAD\":\"s3:\/\/launchwizardsoftware\/sapmedia\/exports\/s4h-2021\",\"SAPINST_CD_RDBMS\":\"s3:\/\/launchwizardsoftware\/sapmedia\/database\/hana-20-sp06-rev60\",\"SAPINST_CD_RDBMS_CLIENT\":\"s3:\/\/launchwizardsoftware\/sapmedia\/hana-client\/20-11\"}, \"onFailureBehaviour\": \"CONTINUE\"}",
  "SnsTopicArn" :"arn:aws:sns:us-east-1:111122223333:InstallStatus",
  "SaveDeploymentArtifacts" :"Yes",
  "DeploymentArtifactsS3Uri" :"s3://launchwizardsoftware",
  "DisableDeploymentRollback" :"Yes",  
  "ApplicationDataVolumeType": "gp3",    
  "DatabaseLogVolumeType": "gp3", 
  "DatabaseAutomaticRecovery": "Yes"
}

Show less

Multi-node deployment with SAP Web Dispatcher, an Application Load Balancer with a secure protocol enabled, and SAP software installed:


{
  "AasAutomaticRecovery": "Yes",
  "AasHostCount": "1",
  "AasHostnames": "sapaas1",
  "AasInstanceType": "r5.4xlarge",
  "ApplicationDataVolumeType": "gp3",
  "applicationName": "WdT002zcpgc",
  "ApplicationSecurityGroupId": "sg-1234567890abcdef0",
  "AvailabilityZone1PrivateSubnet1Id": "subnet-11111111aaaaaaaaa",
  "AvailabilityZone2PrivateSubnet1Id": "subnet-22222222aaaaaaaaa",
  "CreateSecurityGroup": "No",
  "DatabaseAmiId": "ami-0bea9de14f254d7dd",
  "DatabaseAutomaticRecovery": "Yes",
  "DatabaseDataVolumeType": "gp3",
  "DatabaseHostCount": "3",
  "DatabaseInstanceNumber": "30",
  "DatabaseInstanceType": "r5.4xlarge",
  "DatabaseLogVolumeType": "gp3",
  "DatabaseOperatingSystem": "SuSE-Linux-15-SP4-For-SAP-HVM",
  "DatabasePrimaryHostname": "aas4123",
  "DatabaseSecurityGroupId": "sg-1234567890abcdef0",
  "DatabaseSubordinateHostnames": "subhana1,subhana2",
  "DatabaseSystemId": "HDB",
  "DisableDeploymentRollback": "Yes",
  "EnableEbsVolumeEncryption": "No",
  "InstallAas": "Yes",
  "InstallAwsBackintAgent": "No",
  "InstallDatabaseSoftware": "Yes",
  "InstallSap": "Yes",
  "InstallSapWebDispatcher": "Yes",
  "InstallWebDispatcherLoadBalancer": "Yes",
  "KeyPairName": "ExampleKeyPair",
  "PasAmiId": "ami-0bea9de14f254d7dd",
  "PasAutomaticRecovery": "Yes",
  "PasHostname": "sappas",
  "PasInstanceType": "r5.4xlarge",
  "PasOperatingSystem": "SuSE-Linux-15-SP4-For-SAP-HVM",
  "SapInstallationSpecifications": "{\"parameters\":{\"PRODUCT_ID\":\"sapNetweaver-752\",\"CI_INSTANCE_NR\":\"12\",\"ASCS_INSTANCE_NR\":\"10\",\"WD_INSTANCE_NR\":\"14\",\"SAPINST_CD_SAPCAR\":\"s3://launchwizard-example/sapcar/\",\"SAPINST_CD_SWPM\":\"s3://launchwizard-example/swpm/10-sp39/\",\"SAPINST_CD_KERNEL\":\"s3://launchwizard-example/kernel/\",\"SAPINST_CD_LOAD\":\"s3://launchwizard-example/exports/nw-752/\",\"SAPINST_CD_RDBMS\":\"s3://launchwizard-example/database/hana-20-sp07/\",\"SAPINST_CD_RDBMS_CLIENT\":\"s3://launchwizard-example/hana-client/20-11/\",\"SAPINST_CD_WD\":\"s3://launchwizard-example-us-east-1/webdisp/\"}}",
  "SapPassword": "EXAMPLE-PASSWORD",
  "SapSid": "SSD",
  "SapSysGroupId": "5001",
  "SaveDeploymentArtifacts": "No",
  "SetupTransportDomainController": "No",
  "SidAdmUserId": "7002",
  "Timezone": "UTC",
  "VpcId": "vpc-a1b2c3d4",
  "WebDispatcherAdminUserId": "5100",
  "WebDispatcherAmiId": "ami-0bea9de14f254d7dd",
  "WebDispatcherAutoRecovery": "Yes",
  "WebDispatcherAvailabilityZone1PrivateSubnetId": "subnet-11111111aaaaaaaaa",
  "WebDispatcherInstanceNumber": "14",
  "WebDispatcherInstanceType": "r5.4xlarge",
  "WebDispatcherLoadBalancerACMCertificateArn": "arn:aws:acm:region:account:certificate/certificate_ID",
  "WebDispatcherLoadBalancerAvailabilityZone1SubnetId": "subnet-11111111aaaaaaaaa",
  "WebDispatcherLoadBalancerAvailabilityZone2SubnetId": "subnet-22222222aaaaaaaaa",
  "WebDispatcherLoadBalancerInternetFacing": "No",
  "WebDispatcherLoadBalancerSecureProtocolEnabled": "Yes",
  "WebDispatcherLoadBalancerSecurityGroupId": "sg-1234567890abcdef0",
  "WebDispatcherLoadBalancerType": "ALB",
  "WebDispatcherOperatingSystem": "SuSE-Linux-15-SP4-For-SAP-HVM",
  "WebDispatcherSecurityGroupId": "sg-1234567890abcdef0",
  "WebDispatcherServerHostname": "sapwd",
  "WebDispatcherSystemId": "WDD",
  "WebDispatcherVersion": "7.93"
}

Show less

The following list describes each specification input:

KeyPairName

Type: String

Constraints: Up to 255 ASCII characters

Example: home

Description: The name of an existing Amazon EC2 key pair. All instances will launch with this key pair.

Required: Yes
VpcId

Type: String

Example: vpc-01234567890

Description: The existing Amazon VPC where you want to deploy the system.

Required: Yes
AvailabilityZone1PrivateSubnet1Id

Type: String

Example: subnet-11111111aaaaaaaaa

Description: The existing private subnet where you want to deploy the system.

Required: Yes
AvailabilityZone1PrivateSubnet2Id

Type: String

Example: subnet-11111111bbbbbbbbb

Description: The existing private subnet where you want to deploy the system.

Required: Yes
ProxyServerAddress

Type: String

Example: http://10.x.x.x:8080

Description: The ProxyServerAddress address for http access. For example, http://xyz.abc.com:8080 or http://10.x.x.x:8080.

Required: No
NoProxy

Type: String

Example: http://10.x.x.x:8080

Description: A comma separated list of URLs, CIDR ranges, or IP addresses for which to disable ProxyServerAddress settings using the NO_ProxyServerAddress environment variable. You can specify input for this specification when input has been provided for ProxyServerAddress. Any values you specify are appended to the default configuration for the NO_ProxyServerAddress environment variable. The following entries are used by default:

NO_ProxyServerAddress="localhost,127.0.0.1,169.254.169.254,.internal,{VPC_CIDR_RANGE}"

Required: No
Timezone

Type: String

Example: UTC

Description: The time zone to configure for your SAP resources.

Required: Yes
EnableEbsVolumeEncryption

Type: String

AllowedValues: Yes | No

Description: Specifies whether to encrypt the EBS volumes used for the deployment.
Required: Yes
EbsKmsKeyArn

Type: String

Example: arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab

Description: Specifies a KMS key ARN for encrypting EBS volumes when EnableEbsVolumeEncryption is set to Yes.

Conditional: If EnableEbsVolumeEncryption is Yes, you must specify a KMS key ARN.

Required: No
CreateSecurityGroup

Type: String

AllowedValues: Yes | No

Description: Specifies whether you want to create new security groups for the deployment.

Required: Yes
NewSecurityGroupRules

Type: String

Example: "[{\"type\":\"ip\",\"value\":\"10.0.0.0/32\"},{\"type\":\"securityGroupId\",\"value\":\"sg-0e1c107d640209244\"}]"

Description: A list of CIDR blocks or Security Group IDs to be used for creating a new security group.

Conditional: If you specify Yes for CreateSecurityGroup, you must also provide input for this configuration.

Required: No
NewDatabaseSecurityGroupName

Type: String

Example: dbsgname

Description: The name of the database tier security group.

Conditional: If you specify Yes for CreateSecurityGroup, you must also provide input for this configuration.

Required: No
NewApplicationSecurityGroupName

Type: String

Example: dbsgname

Description: The name of the application tier security group.

Conditional: If you specify Yes for CreateSecurityGroup, you must also provide input for this configuration.

Required: No
DatabaseSecurityGroupId

Type: String

Example: sg-1234567890abcdef

Description: The security group ID for your HANA database.

Conditional: If you specify No for CreateSecurityGroup, you must provide an input for this configuration.

Required: No
ApplicationSecurityGroupId

Type: String

Example: sg-1234567890ghijkl

Description: The security group ID for your SAP application.

Conditional: If you specify No for CreateSecurityGroup, you must provide an input for this configuration.

Required: No
DomainName

Type: String

Example: example.com

Description: The domain name to be used for the deployment.

Required: No
HostedZoneName

Type: String

Example: example.com

Description: The Amazon Route 53 hosted zone name.

Required: No
HostedZoneId

Type: String

Example: Z36KTIQEXAMPLE

Description: Route 53 hosted zone id.

Conditional: If you specify a value for HostedZoneName, you must also provide input for this specification.

Required: No
DedicatedHostId

Type: CommaDelimitedList String

Example: h-012a3456b7890cdef

Description: The existing Dedicated Hosts on which you want to launch your instances.

Conditional: If you are using Amazon EC2 High Memory Instances, you must provide an input for this specification. For more information on Amazon EC2 High Memory Instances, see Amazon EC2 High Memory Instances.

Required: No
ConfigurationScripts

Type: String

Example: {"preConfigurationScripts":{"onFailureBehaviour":"CONTINUE","configurationScripts":[{"nodeTypesToRunScriptFor":["DB"],"s3URL":"s3://launchwizard-scripts-preconfig-us-west-2/preconfig-install.sh","sequence":"0"}]},"postConfigurationScripts":{"onFailureBehaviour":"CONTINUE","configurationScripts":[{"nodeTypesToRunScriptFor":["DB"],"s3URL":"s3://launchwizard-scripts-postconfig-us-west-2/postconfig-install.sh","sequence":"0"}]}}

Description: A list of pre- and post-configuration deployment scripts formatted as stringified JSON. You can specify one or more pre- or post-configuration scripts separately, or together. You must provide the follow details for each script:
- The URL for the script that has been uploaded to Amazon S3.
- A sequence number which specifies the order of execution.
- The type of node to run the script on. You can specify DB, and PAS.
- The behavior to use should a failure or timeout occur when running the script. You can specify CONTINUE to proceed with the deployment or ROLLBACK to cancel the deployment.
Required: No
SidAdmUserId

Type: String

Example: 1002

Description: The UID for the <sid>adm user. The default UID is 1002.

Required: Yes
SapSysGroupId

Type: String

Example: 1001

Description: GID for the sapsys group. The default GID is 1001.

Required: Yes
DatabaseSystemId

Type: String

Constraints: This value must consist of 3 characters.

Example: HDB

Description: The SAP HANA system ID for installation and setup.

Required: Yes
SapSid

Type: String

Constraints: This value must consist of 3 characters.

Example: HDB

Description: The SAP application system ID for installation and setup.

Required: Yes
ApplicationDataVolumeType

Type: String

AllowedValues: gp2 | gp3 | io1 | io2

Description: The Amazon EBS volume type for the SAP application.

Required: Yes
DatabaseInstanceNumber

Type: String

Constraints: The instance number must be between 00 and 97.

Example: 00

Description: The SAP HANA instance number to use for installation, setup, and to open ports for security groups.

Required: Yes
InstallAwsBackintAgent

Type: String

AllowedValues: Yes | No

Description: Specifies whether to install the AWS Backint Agent for SAP HANA.

Conditional: This specification can only used in this deployment pattern if InstallSap is specified as Yes, or InstallSap is specified as No and InstallDatabaseSoftware is set to Yes.

Required: Yes
BackintSpecifications

Type: String

Description: Parameters for the AWS Backint Agent for SAP HANA formatted as stringified JSON.

Conditional: If you specify Yes for InstallAwsBackintAgent, you must also provide input for this specification.

Required: No
BackintSpecifications.backintStorageMode

Type: String

Description: Defines the storage mode for AWS Backint agent storage mode. Amazon S3 is the default storage mode.

The following is an example with AWSBACKUP as the Backint storage mode. The parameters assignBackupPlan and backupPlanId are applicable only when backintStorageMode is set to AWSBACKUP.
```
"{
    \"backintStorageMode\":\"AWSBACKUP\",
    \"assignBackupPlan\":\"Yes\",
    \"backupPlanId\":\"000a-sad5w-wewq1-saw82\",
    \"backintAgentVersion\":\"2.0.2.732\",
    \"backintContinueOnFailure\":\"No\",
    \"backintCreateEbsVolume\":\"No\"
}"
```
The following is an example with Amazon S3 as the Backint storage mode. The parameters backintBucketName, backintBucketFolder, backintBucketRegion, and backintAgentVersion are applicable only when backintStorageMode is set to S3, which is also the default backintStorageMode if this parameter is not passed under backintSpecifications.
```
"{\"backintBucketName\":\"amzn-s3-demo-bucket\",\"backintBucketFolder\":\"HANABackintBucketFolder\",\"backintBucketRegion\":\"us-east-1\",\"backintKmsKeyArn\":\"arn:aws:kms:us-east-1:111122223333:alias/aws/s3\",\"backintAgentVersion\":\"2.0.2.732\",\"backintContinueOnFailure\":\"No\",\"backintCreateEbsVolume\":\"No\"}"
```
Conditional: AWS Backup is enabled only if you specify Yes for OnboardToSsmSap.

Allowed values: Amazon S3 | AWS Backup

Supported topologies: All except SapNWOnASESingle. AWS Backup has a validation error for deployments not registered with Systems Manager for SAP.

Required: No
BackintSpecifications.assignBackupPlan

Type: String

Description: Defines whether to assign a backup plan to the SAP HANA databases registered with Systems Manager for SAP. Defaults to No.

Conditional: You must specify Yes for BackintSpecifications.backintStorageMode to enable this specification.

Allowed values: Yes | No

Supported topologies: All except SapNWOnASESingle.

Required: No
BackintSpecifications.backupPlanId

Type: String

Description: BackupPlan ID from AWS Backup to assign to the SAP HANA databases registered with Systems Manager for SAP.

Conditional: If you specify Yes for BackintSpecifications.assignBackupPlan, you must also provide input for this specification.

Allowed values: """^[A-Za-z0-9\_\.\-]+$"""

Supported topologies: All except SapNWOnASESingle.

Required: No
PasOperatingSystem

Type: String

Example: SuSE-Linux-12-SP5-For-SAP-HVM

Description: The operating system (including the version) for the PAS node.

Required: Yes
PasAmiId

Type: String

Example: ami-33333333333333

Description: The AMI ID to use for the PAS node. The AMI can be provided by Amazon, sourced from AWS Marketplace, or with Bring your own images (BYOI). If the AMI from AWS Marketplace is using the Bring Your Own Subscription model (BYOS), you must provide the registation code for SUSE distributions or an account and password for RHEL distributions.

Required: Yes
PasByoip

Type: String

Example: 10.0.1.10

Description: A private IPv4 address to be used by the PAS node. If no value is provided, Amazon EC2 will assign an available IPv4 address in the subnet.

Required: No
PasSlesByosRegistrationCode

Type: String

Description: The SLES registration code for Bring Your Own Subscription model (BYOS) images.

Conditional: If you specify SUSE as the operating system, and it uses BYOS, you must also provide input for this specification.

Required: No
PasRhelByosUsername

Type: String

Example: admin

Description: The username in the Red Hat Enterprise Linux (RHEL) operating system to use.

Conditional: If you specify a BYOS RHEL AMI, you must also provide input for this specification.

Required: No
PasRhelByosUserPassword

Type: String

Description: The password for the user specified in PasRhelByosUsername.

Conditional: If you specify a BYOS RHEL AMI, you must also provide input for this specification.

Required: No
PasAutomaticRecovery

Type: String

AllowedValues: Yes | No

Description: Specify Yes to enable Amazon CloudWatch action based recovery for the PAS node or No to keep it disabled. For HA deployments, set this value to No as the cluster will manage availability for the nodes.

Required: Yes
PasInstanceType

Type: String

Example: r5.2xlarge

Description: The instance type used for the PAS node.

Required: Yes
PasHostname

Type: String

Example: PASPrimary

Description: The host name or DNS short name to use for the PAS node.

Required: Yes
InstallAas

Type: String

AllowedValues: Yes | No

Description: Specifies whether to install AAS instances.

Required: Yes
AasHostCount

Type: Number

Min: 0

Max: 10

Description: The number of AAS instances to deploy.

Conditional: If you specify true for InstallAas, you must provide a value for this specification.

Required: Yes
AasByoip

Type: String

Example: 10.0.1.10

Description: A private IPv4 address to be used by the AAS node. If no value is provided, Amazon EC2 will assign an available IPv4 address in the subnet.

Conditional: You must specify true for InstallAas to provide a value for this specification.

Required: No
AasAutomaticRecovery

Type: String

AllowedValues: Yes | No

Description: Specify Yes to enable Amazon CloudWatch action based recovery for the PAS node or No to keep it disabled. For HA deployments, set this value to No as the cluster will manage availability for the nodes.

Conditional: If you specify true for InstallAas, you must provide a value for this specification.

Required: Yes
AasInstanceType

Type: String

Example: r5.2xlarge

Description: The instance type used for the AAS node.

Conditional: If you specify true for InstallAas, you must provide a value for this specification.

Required: Yes
AasHostnames

Type: String

Example: AASPrimary

Description: The host name or DNS short name to use for the AAS node.

Conditional: If you specify true for InstallAas, you must provide a value for this specification.

Required: Yes
DatabaseOperatingSystem

Type: String

Example: SuSE-Linux-12-SP5-For-SAP-HVM

Description: The operating system (including the version) for SAP HANA.

AllowedValues: SuSE-Linux-12-SP4-HVM | SuSE-Linux-12-SP4-For-SAP-HVM | SuSE-Linux-12-SP5-HVM | SuSE-Linux-12-SP5-For-SAP-HVM | SuSE-Linux-15-HVM | SuSE-Linux-15-For-SAP-HVM | SuSE-Linux-15-SP1-HVM | SuSE-Linux-15-SP1-For-SAP-HVM | SuSE-Linux-15-SP2-HVM | SuSE-Linux-15-SP2-For-SAP-HVM | SuSE-Linux-15-SP3-HVM | SuSE-Linux-15-SP3-For-SAP-HVM | SuSE-Linux-15-SP4-HVM | SuSE-Linux-15-SP4-For-SAP-HVM | Red-Hat-Enterprise-Linux-7.6-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-7.7-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-7.9-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-8.1-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-8.2-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-8.4-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-8.6-For-SAP-HA-US-HVM | Red-Hat-Enterprise-Linux-7.6-BYOS | Red-Hat-Enterprise-Linux-7.7-BYOS | Red-Hat-Enterprise-Linux-8.1-BYOS | Red-Hat-Enterprise-Linux-8.2-BYOS | Red-Hat-Enterprise-Linux-8.4-BYOS | Red-Hat-Enterprise-Linux-8.6-BYOS | SuSE-Linux-12-SP4-For-SAP-BYOS-HVM | SuSE-Linux-12-SP5-For-SAP-BYOS-HVM | SuSE-Linux-15-For-SAP-BYOS-HVM | SuSE-Linux-15-SP1-For-SAP-BYOS-HVM | SuSE-Linux-15-SP2-For-SAP-BYOS-HVM | SuSE-Linux-15-SP3-For-SAP-BYOS-HVM | SuSE-Linux-15-SP4-For-SAP-BYOS-HVM

Required: Yes
DatabaseAmiId

Type: String

Example: ami-11111111111111

Description: The AMI ID to use for the SAP HANA nodes. The AMI can be provided by Amazon, sourced from AWS Marketplace, or with Bring your own images (BYOI). If the AMI from AWS Marketplace is using the Bring Your Own Subscription model (BYOS), you must provide the registation code for SUSE distributions or an account and password for RHEL distributions.

Required: Yes
DatabasePrimaryByoip

Type: String

Example: 10.0.1.10

Description: A private IPv4 address to be used by the primary SAP HANA node. If no value is provided, Amazon EC2 will assign an available IPv4 address in the subnet.

Required: No
DatabaseStandbyByoips

Type: String

Example: 10.0.1.11

Description: A private IPv4 address to be used by the standby SAP HANA node. If no value is provided, Amazon EC2 will assign an available IPv4 address in the subnet.

Required: No
DatabaseAutomaticRecovery

Type: String

AllowedValues: Yes | No

Description: Specify Yes to enable Amazon CloudWatch action based recovery for SAP Hana nodes or No to keep it disabled. For HA deployments, set this value to No as the cluster will manage availability for the nodes.

Required: Yes
DatabaseInstanceType

Type: String

Example: r5.2xlarge

Description: The instance type used for SAP HANA nodes.

Required: Yes
DatabasePrimaryHostname

Type: String

Example: HanaPrimary

Description: The host name or DNS short name to use for the primary SAP HANA node.

Required: Yes
DatabaseSubordinateHostnames

Type: String

Example: SubordinateName1,SubordinateName2

Description: A comma-separated list of the host names or DNS short names to use for the subordinate nodes.

Required: No
DatabaseSlesByosRegistrationCode

Type: String

Description: The SLES registration code for Bring Your Own Subscription model (BYOS) images.

Conditional: If you specify SUSE as the operating system, and it uses BYOS, you must also provide input for this specification.

Required: No
DatabaseRhelByosUserName

Type: String

Example: admin

Description: The username in the Red Hat Enterprise Linux (RHEL) operating system to use.

Conditional: If you specify a BYOS RHEL AMI, you must also provide input for this specification.

Required: No
DatabaseRhelByosUserPassword

Type: String

Description: The password for the user specified in DatabaseRhelByosUserName.

Conditional: If you specify a BYOS RHEL AMI, you must also provide input for this specification.

Required: No
SapPassword

Type: String

Description: Specifes the password to use for setting up the SAP application and database defaults users. The password must:
- Be between 10 and 13 alphanumeric characters.
- Not begin with a number or special character.
- Have at least one uppercase letter.
- Have at least one lowercase letter.
- Have at least one digit.
- Only use the following special characters: #, @, and _.
Required: Yes
DatabaseLogVolumeType

Type: String

AllowedValues: gp2 | gp3 | io1 | io2 | fsx

Description: The Amazon EBS volume type, or FSx for ONTAP (if supported) file share, for database logging.

Conditional: If fsx is specified for DatabaseLogVolumeType, you must also specify fsx for DatabaseDataVolumeType.

Required: Yes
DatabaseOthersVolumeType

Type: String

AllowedValues: gp2 | gp3 | io1 | io2

Default: gp3

Description: The Amazon EBS volume type for other file systems, including the root volume.

Conditional: If fsx is specified for DatabaseDataVolumeType and DatabaseLogVolumeType, you must provide input for this specification.

Required: No
InstallDatabaseSoftware

Type: String

AllowedValues: Yes | No

Description: Specifies whether to install SAP HANA software.

Required: Yes
DatabaseInstallationMediaS3Uri

Type: String

Example: s3://myhanabucket/sap-hana-sps11/

Description: The full path to the Amazon S3 location with SAP HANA installation media.

Required: No
DatabaseHostAutoFailover

Type: String

AllowedValues: Yes | No

Description: Specified whether the SAP HANA host should use automatic failover.

Conditional: If you specify fsx for your volume types, you must also provide input for this specification.

Required: Yes
DatabaseStandbyNodeCount

Type: Number

Min: 0

Max: 17

Description: The number of SAP HANA standby hosts to deploy.

Conditional: If you specify fsx for your volume types and DatabaseHostAutoFailover is set to Yes, you must also provide input for this specification.

Required: Yes
DatabaseStandbyHostnames

Type: String

Example: standby1, standby2, standby3

Description: The host names, or DNS short names, to use for the SAP HANA standby nodes. You can specify multiple values as a comma-separated list.

Conditional: If you specify fsx for your volume types, you must also provide input for this specification.

Required: No
DatabaseStandbyByoips

Type: String

Example: 10.0.1.11

Description: A private IPv4 address to be used by the standby SAP HANA node. If no value is provided, Amazon EC2 will assign an available IPv4 address in the subnet.

Required: No
DatabaseHostCount

Type: Number

Min: 1

Max: 17

Description: The number of hosts to deploy. When you specify 1 for Min, only the master HANA database is deployed in a scale-up architecture. When you specify 2 or higher for Min, subordinate nodes are deployed with the master HANA database in a scale-out architecture.

Required: Yes
DatabaseDataFsxVolumeSize

Type: Number

Example: 500

Description: The volume size of the SAP HANA data volume on Amazon FSx, in GBs.

Conditional: If you specify fsx for DatabaseDataVolumeType, you must also provide input for this specification.

Required: No
DatabaseLogFsxVolumeSize

Type: Number

Example: 50

Description: The volume size of the SAP HANA log volume on Amazon FSx, in GBs.

Conditional: If you specify fsx for DatabaseLogVolumeType, you must also provide input for this specification.

Required: No
DatabaseOtherFsxVolumeSize

Type: Number

Example: 50

Description: The volume size of the other SAP HANA volume on Amazon FSx, in GBs.

Conditional: If you specify fsx for DatabaseOthersVolumeType, you must also provide input for this specification.

Required: No
SetupTransportDomainController

Type: String

AllowedValues: Yes | No

Description: Specifies whether to use transport FS.

Required: Yes
CreateTransportDomainControllerFileSystem

Type: String

AllowedValues: Yes | No

Default: No

Description: Specifies whether to create a new Amazon EFS for the transport domain controller.

Conditional: You must specify Yes for SetupTransportDomainController to provide value for this specification.

Required: No
TransportDomainControllerFileSystemId

Type: String

Example: fs-1234567890abcdef0

Description: The ID of an existing Elastic File System for the transport domain controller.

Conditional: If you specify No for CreateTransportDomainControllerFileSystem, you must also provide input for this specification.

Required: Yes
InstallSap

Type: String

AllowedValues: Yes | No

Description: Specifies whether to install SAP. The following specification combinations can be used to customize your application:
- To install SAP application software, specify No for InstallDatabaseSoftware and Yes for InstallSap.
- To install only the database software and deploy infrastructure resources for the application and database components, specify Yes for InstallDatabaseSoftware and No for InstallSap.
- To only deploy infrastructure resources for the SAP application and database components, specify No for InstallDatabaseSoftware and InstallSap.
Required: Yes
SapInstallationSpecifications

Type: String

Example without SAP Web Dispatcher: {"parameters":{"PRODUCT_ID":"saps4hana-2022","HDB_SCHEMA_NAME":"SAPABAP1","CI_INSTANCE_NR":"12","ASCS_INSTANCE_NR":"10","SAPINST_CD_SAPCAR":"s3://launchwizard-test-sap-media/sapcar","SAPINST_CD_SWPM":"s3://launchwizard-test-sap-media/swpm/10-sp30","SAPINST_CD_KERNEL":"s3://launchwizard-test-sap-media/kernel","SAPINST_CD_LOAD":"s3://launchwizard-test-sap-media/exports/nw-75","SAPINST_CD_RDBMS":"s3://launchwizard-test-sap-media/database","SAPINST_CD_RDBMS_CLIENT":"s3://launchwizard-test-sap-media/hana-client"}, "onFailureBehaviour": "CONTINUE/ROLLBACK"}

Example with SAP Web Dispatcher: {"parameters":{"PRODUCT_ID":"sapNetweaver-752","CI_INSTANCE_NR":"12","ASCS_INSTANCE_NR":"10","WD_INSTANCE_NR":"14","ASCS_VIRTUAL_HOSTNAME":"sapvirascs","ASCS_OVERLAY_IP":"10.0.0.8","ERS_VIRTUAL_HOSTNAME":"sapvirers","ERS_OVERLAY_IP":"10.0.0.9","DB_VIRTUAL_HOSTNAME":"sapvirdb","SAP_PACEMAKER_TAG":"sappacetag","SAPINST_CD_SAPCAR":"s3://launchwizard-example/sapcar/","SAPINST_CD_SWPM":"s3://launchwizard-example/swpm/10-sp39/","SAPINST_CD_KERNEL":"s3://launchwizard-example/kernel/","SAPINST_CD_LOAD":"s3://launchwizard-example/exports/nw-752/","SAPINST_CD_RDBMS":"s3://launchwizard-example/database/hana-20-sp07/","SAPINST_CD_RDBMS_CLIENT":"s3://launchwizard-example/hana-client/20-11/","SAPINST_CD_WD":"s3://launchwizard-example-us-east-1/webdisp/"}

Description: A list of SAP Application installation parameters formatted as stringified JSON. You can specify any of the following values for the PRODUCT_ID: sapNetWeaver-752 | sapNetWeaver-750 | sapNetweaverJavaOnly-750 | saps4hana-1909 | saps4hana-2020 | saps4hana-2021 | saps4hana-2022 | saps4hana-2023 | saps4hanafoundations-2021 | saps4hanafoundations-2022 | saps4hanafoundations-2023 | sapbw4hana-2.0 | sapbw4hana-2021 | sapsolman-7.2

Conditional: If you specify Yes for InstallSap, you must also provide input for this specification.

Required: No
SnsTopicArn

Type: String

Example: arn:aws:sns:us-east-1:1234567890:Test-Topic

Description: The Amazon SNS topic used to receive the final deployment status from Launch Wizard.

Required: No
DisableDeploymentRollback

Type: String

AllowedValues: Yes | No

Description: Specifies whether to disable rollback of the AWS CloudFormation stack if the stack creation fails.

Required: Yes
SaveDeploymentArtifacts

Type: String

AllowedValues: Yes | No

Description: Specifies whether to save the deployment artifacts in Service Catalog after deployment is complete.

Required: Yes
DeploymentArtifactsS3Uri

Type: String

Example: s3://save-test-us-east-1

Description: The Amazon S3 URI in which to save the deployment artifacts for Service Catalog.

Required: No
InstallSapWebDispatcher

Type: String

AllowedValues: Yes | No

Description: Specifies whether to install SAP Web Dispatcher.

Required: No
InstallWebDispatcherLoadBalancer

Type: String

AllowedValues: Yes | No

Description: Specifies whether to deploy a load balancer in front of SAP Web Dispatcher nodes.

Conditional: This specification can only be used if InstallSapWebDispatcher and InstallSap are specified as Yes.

Required: Yes
WebDispatcherLoadBalancerType

Type: String

AllowedValues: ALB | NLB

Description: Specifies the kind of load balancer to deploy in front of SAP Web Dispatcher nodes.

Conditional: This specification can only be used if InstallSapWebDispatcher, InstallSap, andInstallWebDispatcherLoadBalancer are specified as Yes.

Required: Yes
WebDispatcherLoadBalancerInternetFacing

Type: String

AllowedValues: Yes | No

Description: Specifies whether the load balancer in front of SAP Web Dispatcher is internet-facing.

Conditional: This specification can only be used if InstallSapWebDispatcher, InstallSap, andInstallWebDispatcherLoadBalancer are specified as Yes.

Required: Yes
WebDispatcherInstanceNumber

Type: Number

Min: 00

Max: 97

Description: The double-digit instance number for the SAP Web Dispatcher instance.

Conditional: This specification can only be used if InstallSapWebDispatcher and InstallSap are specified as Yes.

Required: Yes
WebDispatcherAdminUserId

Type: Number

Min: 100

Max: 65536

Description: The user ID number for the SAP Web Dispatcher administrator.

Conditional: This specification can only be used if InstallSapWebDispatcher is specified as Yes.

Required: Yes
WebDispatcherSystemId

Type: String

Description: This value must consist of 3 uppercase characters.

Conditional: This specification can only be used if InstallSapWebDispatcher is specified as Yes.

Required: Yes
WebDispatcherVersion

Type: String

AllowedValues: 7.89

Description: The SAP Web Dispatcher version to use. For more information, see Supported versions of SAP Web Dispatcher.

Conditional: This specification can only be used if InstallSapWebDispatcher and InstallSap are specified as Yes.

Required: Yes
WebDispatcherOperatingSystem

Type: String

AllowedValues: Yes | No

Description: The operating system to use for SAP Web Dispatcher nodes. For more information, see Operating systems.

Conditional: This specification can only be used if InstallSapWebDispatcher is specified as Yes.

Required: Yes
WebDispatcherAmiId

Type: String

Example: ami-44444444444444

Description: The AMI ID to use for SAP Web Dispatcher nodes.

Conditional: This specification can only be used if InstallSapWebDispatcher is specified as Yes.

Required: Yes
WebDispatcherInstanceType

Type: String

Example: r5.2xlarge

Description: The instance type to use for SAP Web Dispatcher nodes.

Conditional: This specification can only be used if InstallSapWebDispatcher is specified as Yes.

Required: Yes
WebDispatcherAutoRecovery

Type: String

AllowedValues: Yes | No

Description: .

Conditional: This specification can only be used if InstallSapWebDispatcher is specified as Yes. Specify Yes to enable Amazon CloudWatch action based recovery for the SAP Web Dispatcher nodes or No to keep it disabled.

Required: Yes
WebDispatcherAvailabilityZone1PrivateSubnetId

Type: String

Example: subnet-11111111aaaaaaaaa

Description: The existing private subnet where you want to deploy SAP Web Dispatcher nodes.

Conditional: This specification can only be used if InstallWebDispatcherLoadBalancer is specified as Yes.

Required: Yes
WebDispatcherServerHostname

Type: String

Example: sapwdprimary

Description: The host name or DNS short name to use for the SAP Web Dispatcher node.

Conditional: This specification can only be used if InstallSapWebDispatcher is specified as Yes.

Required: Yes
WebDispatcherLoadBalancerSecureProtocolEnabled

Type: String

AllowedValues: Yes | No

Description: Specifies the ACM certificate to use for your load balancer’s TLS/HTTPS listener.

Conditional: This specification can only be used if InstallSapWebDispatcher, InstallSap, andInstallWebDispatcherLoadBalancer are specified as Yes.

Required: Yes
WebDispatcherLoadBalancerACMCertificateArn

Type: String

Example:

Description: The ARN of the ACM certificate to use for your load balancer’s TLS/HTTPS listener.

Conditional: This specification can only be used if InstallSapWebDispatcher, InstallSap, InstallWebDispatcherLoadBalancer, and WebDispatcherLoadBalancerSecureProtocolEnabled are specified as Yes.

Required: Yes
WebDispatcherLoadBalancerAvailabilityZone1SubnetId

Type: String

Example: subnet-11111111aaaaaaaaa

Description: The existing private subnet where you want to deploy SAP Web Dispatcher nodes.

Conditional: This specification can only be used if InstallSapWebDispatcher, InstallSap, andInstallWebDispatcherLoadBalancer are specified as Yes.

Required: Yes
WebDispatcherLoadBalancerAvailabilityZone2SubnetId

Type: String

Example: subnet-22222222aaaaaaaaa

Description: The additional existing private subnet where you want to deploy SAP Web Dispatcher nodes.

Conditional: This specification can only be used if InstallSapWebDispatcher, InstallSap, andInstallWebDispatcherLoadBalancer are specified as Yes.

Required: Yes
WebDispatcherSecurityGroupId

Type: String

Example:

sg-1234567890abcdef

Description: The security group to assign to your SAP Web Dispatcher nodes.

Conditional: This specification can only be used if InstallSapWebDispatcher is specified as Yes.

Required: Yes
WebDispatcherLoadBalancerSecurityGroupId

Type: String

Example: sg-1234567890abcdef

Description: The security group to assign to the load balancer for SAP Web Dispatcher nodes.

Conditional: This specification can only be used if InstallSapWebDispatcher, InstallSap, andInstallWebDispatcherLoadBalancer are specified as Yes.

Required: Yes
NewWebDispatcherSecurityGroupName

Type: String

Example:

Description: The name of the security group to create for SAP Web Dispatcher.

Conditional: This specification can only be used if InstallSapWebDispatcher, InstallSap, InstallWebDispatcherLoadBalancer, andCreateSecurityGroup are specified as Yes.

Required: Yes
WebDispatcherRhelByosUserName

Type: String

Description: The username for the RHEL BYOS AMI.

Conditional:

This specification can only be used if InstallSapWebDispatcher is specified as Yes.

Required: Yes
WebDispatcherRhelByosUserPassword

Type: String

Description: The password for the RHEL BYOS AMI.

Conditional: This specification can only be used if InstallSapWebDispatcher is specified as Yes.

Required: Yes
WebDispatcherSlesByosRegistrationCode

Type: String

Description: The registration code for the SUSE BYOS AMI.

Conditional: This specification can only be used if InstallSapWebDispatcher is specified as Yes.

Required: Yes
WdByoip

Type: String

Example: 10.0.0.1

Description: The BYOIP address to use.

Conditional: This specification can only be used if InstallSapWebDispatcher is specified as Yes.

Required: Yes
WdVirtualByoip

Type: String

Example: 10.0.0.2

Description: The virtual BYOIP address to use.

Conditional: This specification can only be used if InstallSapWebDispatcher and SapVirtualIpOptIn are specified as Yes.

Required: Yes
WebDispatcherServerVirtualHostname

Type: String

Example:

Description: The virtual hostname to use when you use a virtual BYOIP address.

Conditional: This specification can only be used if InstallSapWebDispatcher and SapVirtualIpOptIn are specified as Yes.

Required: Yes
WebDispatcherNewLoadBalancerSecurityGroupName

Type: String

Example:

Description: The name of the security group to create for the load balancer for SAP Web Dispatcher.

Conditional: This specification can only be used if InstallSapWebDispatcher, InstallSap, InstallWebDispatcherLoadBalancer, andCreateSecurityGroup are specified as Yes.

Required: Yes

Warning Javascript is disabled or is unavailable in your browser.

To use the Amazon Web Services Documentation, Javascript must be enabled. Please refer to your browser's Help pages for instructions.

Document Conventions

SapNWOnHanaHA

SapNWOnHanaSingle