const (
    // AccountJoinedMethodInvited is a AccountJoinedMethod enum value
    AccountJoinedMethodInvited = "INVITED"

    // AccountJoinedMethodCreated is a AccountJoinedMethod enum value
    AccountJoinedMethodCreated = "CREATED"
)

const (
    // AccountStatusActive is a AccountStatus enum value
    AccountStatusActive = "ACTIVE"

    // AccountStatusSuspended is a AccountStatus enum value
    AccountStatusSuspended = "SUSPENDED"
)

const (
    // ActionTypeInvite is a ActionType enum value
    ActionTypeInvite = "INVITE"

    // ActionTypeEnableAllFeatures is a ActionType enum value
    ActionTypeEnableAllFeatures = "ENABLE_ALL_FEATURES"

    // ActionTypeApproveAllFeatures is a ActionType enum value
    ActionTypeApproveAllFeatures = "APPROVE_ALL_FEATURES"

    // ActionTypeAddOrganizationsServiceLinkedRole is a ActionType enum value
    ActionTypeAddOrganizationsServiceLinkedRole = "ADD_ORGANIZATIONS_SERVICE_LINKED_ROLE"
)

const (
    // ChildTypeAccount is a ChildType enum value
    ChildTypeAccount = "ACCOUNT"

    // ChildTypeOrganizationalUnit is a ChildType enum value
    ChildTypeOrganizationalUnit = "ORGANIZATIONAL_UNIT"
)

const (
    // ConstraintViolationExceptionReasonAccountNumberLimitExceeded is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonAccountNumberLimitExceeded = "ACCOUNT_NUMBER_LIMIT_EXCEEDED"

    // ConstraintViolationExceptionReasonHandshakeRateLimitExceeded is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonHandshakeRateLimitExceeded = "HANDSHAKE_RATE_LIMIT_EXCEEDED"

    // ConstraintViolationExceptionReasonOuNumberLimitExceeded is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonOuNumberLimitExceeded = "OU_NUMBER_LIMIT_EXCEEDED"

    // ConstraintViolationExceptionReasonOuDepthLimitExceeded is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonOuDepthLimitExceeded = "OU_DEPTH_LIMIT_EXCEEDED"

    // ConstraintViolationExceptionReasonPolicyNumberLimitExceeded is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonPolicyNumberLimitExceeded = "POLICY_NUMBER_LIMIT_EXCEEDED"

    // ConstraintViolationExceptionReasonMaxPolicyTypeAttachmentLimitExceeded is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonMaxPolicyTypeAttachmentLimitExceeded = "MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED"

    // ConstraintViolationExceptionReasonMinPolicyTypeAttachmentLimitExceeded is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonMinPolicyTypeAttachmentLimitExceeded = "MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED"

    // ConstraintViolationExceptionReasonAccountCannotLeaveOrganization is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonAccountCannotLeaveOrganization = "ACCOUNT_CANNOT_LEAVE_ORGANIZATION"

    // ConstraintViolationExceptionReasonAccountCannotLeaveWithoutEula is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonAccountCannotLeaveWithoutEula = "ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA"

    // ConstraintViolationExceptionReasonAccountCannotLeaveWithoutPhoneVerification is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonAccountCannotLeaveWithoutPhoneVerification = "ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION"

    // ConstraintViolationExceptionReasonMasterAccountPaymentInstrumentRequired is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonMasterAccountPaymentInstrumentRequired = "MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED"

    // ConstraintViolationExceptionReasonMemberAccountPaymentInstrumentRequired is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonMemberAccountPaymentInstrumentRequired = "MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED"

    // ConstraintViolationExceptionReasonAccountCreationRateLimitExceeded is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonAccountCreationRateLimitExceeded = "ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED"

    // ConstraintViolationExceptionReasonMasterAccountAddressDoesNotMatchMarketplace is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonMasterAccountAddressDoesNotMatchMarketplace = "MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE"

    // ConstraintViolationExceptionReasonMasterAccountMissingContactInfo is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonMasterAccountMissingContactInfo = "MASTER_ACCOUNT_MISSING_CONTACT_INFO"

    // ConstraintViolationExceptionReasonMasterAccountNotGovcloudEnabled is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonMasterAccountNotGovcloudEnabled = "MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED"

    // ConstraintViolationExceptionReasonOrganizationNotInAllFeaturesMode is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonOrganizationNotInAllFeaturesMode = "ORGANIZATION_NOT_IN_ALL_FEATURES_MODE"

    // ConstraintViolationExceptionReasonCreateOrganizationInBillingModeUnsupportedRegion is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonCreateOrganizationInBillingModeUnsupportedRegion = "CREATE_ORGANIZATION_IN_BILLING_MODE_UNSUPPORTED_REGION"

    // ConstraintViolationExceptionReasonEmailVerificationCodeExpired is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonEmailVerificationCodeExpired = "EMAIL_VERIFICATION_CODE_EXPIRED"

    // ConstraintViolationExceptionReasonWaitPeriodActive is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonWaitPeriodActive = "WAIT_PERIOD_ACTIVE"

    // ConstraintViolationExceptionReasonMaxTagLimitExceeded is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonMaxTagLimitExceeded = "MAX_TAG_LIMIT_EXCEEDED"

    // ConstraintViolationExceptionReasonTagPolicyViolation is a ConstraintViolationExceptionReason enum value
    ConstraintViolationExceptionReasonTagPolicyViolation = "TAG_POLICY_VIOLATION"
)

const (
    // CreateAccountFailureReasonAccountLimitExceeded is a CreateAccountFailureReason enum value
    CreateAccountFailureReasonAccountLimitExceeded = "ACCOUNT_LIMIT_EXCEEDED"

    // CreateAccountFailureReasonEmailAlreadyExists is a CreateAccountFailureReason enum value
    CreateAccountFailureReasonEmailAlreadyExists = "EMAIL_ALREADY_EXISTS"

    // CreateAccountFailureReasonInvalidAddress is a CreateAccountFailureReason enum value
    CreateAccountFailureReasonInvalidAddress = "INVALID_ADDRESS"

    // CreateAccountFailureReasonInvalidEmail is a CreateAccountFailureReason enum value
    CreateAccountFailureReasonInvalidEmail = "INVALID_EMAIL"

    // CreateAccountFailureReasonConcurrentAccountModification is a CreateAccountFailureReason enum value
    CreateAccountFailureReasonConcurrentAccountModification = "CONCURRENT_ACCOUNT_MODIFICATION"

    // CreateAccountFailureReasonInternalFailure is a CreateAccountFailureReason enum value
    CreateAccountFailureReasonInternalFailure = "INTERNAL_FAILURE"
)

const (
    // CreateAccountStateInProgress is a CreateAccountState enum value
    CreateAccountStateInProgress = "IN_PROGRESS"

    // CreateAccountStateSucceeded is a CreateAccountState enum value
    CreateAccountStateSucceeded = "SUCCEEDED"

    // CreateAccountStateFailed is a CreateAccountState enum value
    CreateAccountStateFailed = "FAILED"
)

const (
    // HandshakeConstraintViolationExceptionReasonAccountNumberLimitExceeded is a HandshakeConstraintViolationExceptionReason enum value
    HandshakeConstraintViolationExceptionReasonAccountNumberLimitExceeded = "ACCOUNT_NUMBER_LIMIT_EXCEEDED"

    // HandshakeConstraintViolationExceptionReasonHandshakeRateLimitExceeded is a HandshakeConstraintViolationExceptionReason enum value
    HandshakeConstraintViolationExceptionReasonHandshakeRateLimitExceeded = "HANDSHAKE_RATE_LIMIT_EXCEEDED"

    // HandshakeConstraintViolationExceptionReasonAlreadyInAnOrganization is a HandshakeConstraintViolationExceptionReason enum value
    HandshakeConstraintViolationExceptionReasonAlreadyInAnOrganization = "ALREADY_IN_AN_ORGANIZATION"

    // HandshakeConstraintViolationExceptionReasonOrganizationAlreadyHasAllFeatures is a HandshakeConstraintViolationExceptionReason enum value
    HandshakeConstraintViolationExceptionReasonOrganizationAlreadyHasAllFeatures = "ORGANIZATION_ALREADY_HAS_ALL_FEATURES"

    // HandshakeConstraintViolationExceptionReasonInviteDisabledDuringEnableAllFeatures is a HandshakeConstraintViolationExceptionReason enum value
    HandshakeConstraintViolationExceptionReasonInviteDisabledDuringEnableAllFeatures = "INVITE_DISABLED_DURING_ENABLE_ALL_FEATURES"

    // HandshakeConstraintViolationExceptionReasonPaymentInstrumentRequired is a HandshakeConstraintViolationExceptionReason enum value
    HandshakeConstraintViolationExceptionReasonPaymentInstrumentRequired = "PAYMENT_INSTRUMENT_REQUIRED"

    // HandshakeConstraintViolationExceptionReasonOrganizationFromDifferentSellerOfRecord is a HandshakeConstraintViolationExceptionReason enum value
    HandshakeConstraintViolationExceptionReasonOrganizationFromDifferentSellerOfRecord = "ORGANIZATION_FROM_DIFFERENT_SELLER_OF_RECORD"

    // HandshakeConstraintViolationExceptionReasonOrganizationMembershipChangeRateLimitExceeded is a HandshakeConstraintViolationExceptionReason enum value
    HandshakeConstraintViolationExceptionReasonOrganizationMembershipChangeRateLimitExceeded = "ORGANIZATION_MEMBERSHIP_CHANGE_RATE_LIMIT_EXCEEDED"
)

const (
    // HandshakePartyTypeAccount is a HandshakePartyType enum value
    HandshakePartyTypeAccount = "ACCOUNT"

    // HandshakePartyTypeOrganization is a HandshakePartyType enum value
    HandshakePartyTypeOrganization = "ORGANIZATION"

    // HandshakePartyTypeEmail is a HandshakePartyType enum value
    HandshakePartyTypeEmail = "EMAIL"
)

const (
    // HandshakeResourceTypeAccount is a HandshakeResourceType enum value
    HandshakeResourceTypeAccount = "ACCOUNT"

    // HandshakeResourceTypeOrganization is a HandshakeResourceType enum value
    HandshakeResourceTypeOrganization = "ORGANIZATION"

    // HandshakeResourceTypeOrganizationFeatureSet is a HandshakeResourceType enum value
    HandshakeResourceTypeOrganizationFeatureSet = "ORGANIZATION_FEATURE_SET"

    // HandshakeResourceTypeEmail is a HandshakeResourceType enum value
    HandshakeResourceTypeEmail = "EMAIL"

    // HandshakeResourceTypeMasterEmail is a HandshakeResourceType enum value
    HandshakeResourceTypeMasterEmail = "MASTER_EMAIL"

    // HandshakeResourceTypeMasterName is a HandshakeResourceType enum value
    HandshakeResourceTypeMasterName = "MASTER_NAME"

    // HandshakeResourceTypeNotes is a HandshakeResourceType enum value
    HandshakeResourceTypeNotes = "NOTES"

    // HandshakeResourceTypeParentHandshake is a HandshakeResourceType enum value
    HandshakeResourceTypeParentHandshake = "PARENT_HANDSHAKE"
)

const (
    // HandshakeStateRequested is a HandshakeState enum value
    HandshakeStateRequested = "REQUESTED"

    // HandshakeStateOpen is a HandshakeState enum value
    HandshakeStateOpen = "OPEN"

    // HandshakeStateCanceled is a HandshakeState enum value
    HandshakeStateCanceled = "CANCELED"

    // HandshakeStateAccepted is a HandshakeState enum value
    HandshakeStateAccepted = "ACCEPTED"

    // HandshakeStateDeclined is a HandshakeState enum value
    HandshakeStateDeclined = "DECLINED"

    // HandshakeStateExpired is a HandshakeState enum value
    HandshakeStateExpired = "EXPIRED"
)

const (
    // IAMUserAccessToBillingAllow is a IAMUserAccessToBilling enum value
    IAMUserAccessToBillingAllow = "ALLOW"

    // IAMUserAccessToBillingDeny is a IAMUserAccessToBilling enum value
    IAMUserAccessToBillingDeny = "DENY"
)

const (
    // InvalidInputExceptionReasonInvalidPartyTypeTarget is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonInvalidPartyTypeTarget = "INVALID_PARTY_TYPE_TARGET"

    // InvalidInputExceptionReasonInvalidSyntaxOrganizationArn is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonInvalidSyntaxOrganizationArn = "INVALID_SYNTAX_ORGANIZATION_ARN"

    // InvalidInputExceptionReasonInvalidSyntaxPolicyId is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonInvalidSyntaxPolicyId = "INVALID_SYNTAX_POLICY_ID"

    // InvalidInputExceptionReasonInvalidEnum is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonInvalidEnum = "INVALID_ENUM"

    // InvalidInputExceptionReasonInvalidListMember is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonInvalidListMember = "INVALID_LIST_MEMBER"

    // InvalidInputExceptionReasonMaxLengthExceeded is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonMaxLengthExceeded = "MAX_LENGTH_EXCEEDED"

    // InvalidInputExceptionReasonMaxValueExceeded is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonMaxValueExceeded = "MAX_VALUE_EXCEEDED"

    // InvalidInputExceptionReasonMinLengthExceeded is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonMinLengthExceeded = "MIN_LENGTH_EXCEEDED"

    // InvalidInputExceptionReasonMinValueExceeded is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonMinValueExceeded = "MIN_VALUE_EXCEEDED"

    // InvalidInputExceptionReasonImmutablePolicy is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonImmutablePolicy = "IMMUTABLE_POLICY"

    // InvalidInputExceptionReasonInvalidPattern is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonInvalidPattern = "INVALID_PATTERN"

    // InvalidInputExceptionReasonInvalidPatternTargetId is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonInvalidPatternTargetId = "INVALID_PATTERN_TARGET_ID"

    // InvalidInputExceptionReasonInputRequired is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonInputRequired = "INPUT_REQUIRED"

    // InvalidInputExceptionReasonInvalidNextToken is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonInvalidNextToken = "INVALID_NEXT_TOKEN"

    // InvalidInputExceptionReasonMaxLimitExceededFilter is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonMaxLimitExceededFilter = "MAX_LIMIT_EXCEEDED_FILTER"

    // InvalidInputExceptionReasonMovingAccountBetweenDifferentRoots is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonMovingAccountBetweenDifferentRoots = "MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS"

    // InvalidInputExceptionReasonInvalidFullNameTarget is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonInvalidFullNameTarget = "INVALID_FULL_NAME_TARGET"

    // InvalidInputExceptionReasonUnrecognizedServicePrincipal is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonUnrecognizedServicePrincipal = "UNRECOGNIZED_SERVICE_PRINCIPAL"

    // InvalidInputExceptionReasonInvalidRoleName is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonInvalidRoleName = "INVALID_ROLE_NAME"

    // InvalidInputExceptionReasonInvalidSystemTagsParameter is a InvalidInputExceptionReason enum value
    InvalidInputExceptionReasonInvalidSystemTagsParameter = "INVALID_SYSTEM_TAGS_PARAMETER"
)

const (
    // OrganizationFeatureSetAll is a OrganizationFeatureSet enum value
    OrganizationFeatureSetAll = "ALL"

    // OrganizationFeatureSetConsolidatedBilling is a OrganizationFeatureSet enum value
    OrganizationFeatureSetConsolidatedBilling = "CONSOLIDATED_BILLING"
)

const (
    // ParentTypeRoot is a ParentType enum value
    ParentTypeRoot = "ROOT"

    // ParentTypeOrganizationalUnit is a ParentType enum value
    ParentTypeOrganizationalUnit = "ORGANIZATIONAL_UNIT"
)

const (
    // PolicyTypeStatusEnabled is a PolicyTypeStatus enum value
    PolicyTypeStatusEnabled = "ENABLED"

    // PolicyTypeStatusPendingEnable is a PolicyTypeStatus enum value
    PolicyTypeStatusPendingEnable = "PENDING_ENABLE"

    // PolicyTypeStatusPendingDisable is a PolicyTypeStatus enum value
    PolicyTypeStatusPendingDisable = "PENDING_DISABLE"
)

const (
    // TargetTypeAccount is a TargetType enum value
    TargetTypeAccount = "ACCOUNT"

    // TargetTypeOrganizationalUnit is a TargetType enum value
    TargetTypeOrganizationalUnit = "ORGANIZATIONAL_UNIT"

    // TargetTypeRoot is a TargetType enum value
    TargetTypeRoot = "ROOT"
)

const (

    // ErrCodeAWSOrganizationsNotInUseException for service response error code
    // "AWSOrganizationsNotInUseException".
    //
    // Your account isn't a member of an organization. To make this request, you
    // must use the credentials of an account that belongs to an organization.
    ErrCodeAWSOrganizationsNotInUseException = "AWSOrganizationsNotInUseException"

    // ErrCodeAccessDeniedException for service response error code
    // "AccessDeniedException".
    //
    // You don't have permissions to perform the requested operation. The user or
    // role that is making the request must have at least one IAM permissions policy
    // attached that grants the required permissions. For more information, see
    // Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
    // in the IAM User Guide.
    ErrCodeAccessDeniedException = "AccessDeniedException"

    // ErrCodeAccessDeniedForDependencyException for service response error code
    // "AccessDeniedForDependencyException".
    //
    // The operation that you attempted requires you to have the iam:CreateServiceLinkedRole
    // for organizations.amazonaws.com permission so that AWS Organizations can
    // create the required service-linked role. You don't have that permission.
    ErrCodeAccessDeniedForDependencyException = "AccessDeniedForDependencyException"

    // ErrCodeAccountNotFoundException for service response error code
    // "AccountNotFoundException".
    //
    // We can't find an AWS account with the AccountId that you specified, or the
    // account whose credentials you used to make this request isn't a member of
    // an organization.
    ErrCodeAccountNotFoundException = "AccountNotFoundException"

    // ErrCodeAccountOwnerNotVerifiedException for service response error code
    // "AccountOwnerNotVerifiedException".
    //
    // You can't invite an existing account to your organization until you verify
    // that you own the email address associated with the master account. For more
    // information, see Email Address Verification (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_create.html#about-email-verification)
    // in the AWS Organizations User Guide.
    ErrCodeAccountOwnerNotVerifiedException = "AccountOwnerNotVerifiedException"

    // ErrCodeAlreadyInOrganizationException for service response error code
    // "AlreadyInOrganizationException".
    //
    // This account is already a member of an organization. An account can belong
    // to only one organization at a time.
    ErrCodeAlreadyInOrganizationException = "AlreadyInOrganizationException"

    // ErrCodeChildNotFoundException for service response error code
    // "ChildNotFoundException".
    //
    // We can't find an organizational unit (OU) or AWS account with the ChildId
    // that you specified.
    ErrCodeChildNotFoundException = "ChildNotFoundException"

    // ErrCodeConcurrentModificationException for service response error code
    // "ConcurrentModificationException".
    //
    // The target of the operation is currently being modified by a different request.
    // Try again later.
    ErrCodeConcurrentModificationException = "ConcurrentModificationException"

    // ErrCodeConstraintViolationException for service response error code
    // "ConstraintViolationException".
    //
    // Performing this operation violates a minimum or maximum value limit. For
    // example, attempting to remove the last service control policy (SCP) from
    // an OU or root, inviting or creating too many accounts to the organization,
    // or attaching too many policies to an account, OU, or root. This exception
    // includes a reason that contains additional information about the violated
    // limit.
    //
    // Some of the reasons in the following list might not be applicable to this
    // specific API or operation:
    //
    //    * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
    //    from the organization that doesn't yet have enough information to exist
    //    as a standalone account. This account requires you to first agree to the
    //    AWS Customer Agreement. Follow the steps at To leave an organization when
    //    all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
    //    in the AWS Organizations User Guide.
    //
    //    * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
    //    an account from the organization that doesn't yet have enough information
    //    to exist as a standalone account. This account requires you to first complete
    //    phone verification. Follow the steps at To leave an organization when
    //    all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
    //    in the AWS Organizations User Guide.
    //
    //    * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
    //    of accounts that you can create in one day.
    //
    //    * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
    //    the number of accounts in an organization. If you need more accounts,
    //    contact AWS Support (https://console.aws.amazon.com/support/home#/) to
    //    request an increase in your limit. Or the number of invitations that you
    //    tried to send would cause you to exceed the limit of accounts in your
    //    organization. Send fewer invitations or contact AWS Support to request
    //    an increase in the number of accounts. Deleted and closed accounts still
    //    count toward your limit. If you get receive this exception when running
    //    a command immediately after creating the organization, wait one hour and
    //    try again. If after an hour it continues to fail with this error, contact
    //    AWS Support (https://console.aws.amazon.com/support/home#/).
    //
    //    * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
    //    handshakes that you can send in one day.
    //
    //    * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
    //    in this organization, you first must migrate the organization's master
    //    account to the marketplace that corresponds to the master account's address.
    //    For example, accounts with India addresses must be associated with the
    //    AISPL marketplace. All accounts in an organization must be associated
    //    with the same marketplace.
    //
    //    * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
    //    must first provide contact a valid address and phone number for the master
    //    account. Then try the operation again.
    //
    //    * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
    //    master account must have an associated account in the AWS GovCloud (US-West)
    //    Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
    //    in the AWS GovCloud User Guide.
    //
    //    * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
    //    with this master account, you first must associate a valid payment instrument,
    //    such as a credit card, with the account. Follow the steps at To leave
    //    an organization when all required account information has not yet been
    //    provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
    //    in the AWS Organizations User Guide.
    //
    //    * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
    //    number of policies of a certain type that can be attached to an entity
    //    at one time.
    //
    //    * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
    //    on this resource.
    //
    //    * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
    //    with this member account, you first must associate a valid payment instrument,
    //    such as a credit card, with the account. Follow the steps at To leave
    //    an organization when all required account information has not yet been
    //    provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
    //    in the AWS Organizations User Guide.
    //
    //    * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
    //    policy from an entity that would cause the entity to have fewer than the
    //    minimum number of policies of a certain type required.
    //
    //    * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
    //    too many levels deep.
    //
    //    * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
    //    that requires the organization to be configured to support all features.
    //    An organization that supports only consolidated billing features can't
    //    perform this operation.
    //
    //    * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
    //    that you can have in an organization.
    //
    //    * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
    //    policies that you can have in an organization.
    ErrCodeConstraintViolationException = "ConstraintViolationException"

    // ErrCodeCreateAccountStatusNotFoundException for service response error code
    // "CreateAccountStatusNotFoundException".
    //
    // We can't find an create account request with the CreateAccountRequestId that
    // you specified.
    ErrCodeCreateAccountStatusNotFoundException = "CreateAccountStatusNotFoundException"

    // ErrCodeDestinationParentNotFoundException for service response error code
    // "DestinationParentNotFoundException".
    //
    // We can't find the destination container (a root or OU) with the ParentId
    // that you specified.
    ErrCodeDestinationParentNotFoundException = "DestinationParentNotFoundException"

    // ErrCodeDuplicateAccountException for service response error code
    // "DuplicateAccountException".
    //
    // That account is already present in the specified destination.
    ErrCodeDuplicateAccountException = "DuplicateAccountException"

    // ErrCodeDuplicateHandshakeException for service response error code
    // "DuplicateHandshakeException".
    //
    // A handshake with the same action and target already exists. For example,
    // if you invited an account to join your organization, the invited account
    // might already have a pending invitation from this organization. If you intend
    // to resend an invitation to an account, ensure that existing handshakes that
    // might be considered duplicates are canceled or declined.
    ErrCodeDuplicateHandshakeException = "DuplicateHandshakeException"

    // ErrCodeDuplicateOrganizationalUnitException for service response error code
    // "DuplicateOrganizationalUnitException".
    //
    // An OU with the same name already exists.
    ErrCodeDuplicateOrganizationalUnitException = "DuplicateOrganizationalUnitException"

    // ErrCodeDuplicatePolicyAttachmentException for service response error code
    // "DuplicatePolicyAttachmentException".
    //
    // The selected policy is already attached to the specified target.
    ErrCodeDuplicatePolicyAttachmentException = "DuplicatePolicyAttachmentException"

    // ErrCodeDuplicatePolicyException for service response error code
    // "DuplicatePolicyException".
    //
    // A policy with the same name already exists.
    ErrCodeDuplicatePolicyException = "DuplicatePolicyException"

    // ErrCodeFinalizingOrganizationException for service response error code
    // "FinalizingOrganizationException".
    //
    // AWS Organizations couldn't perform the operation because your organization
    // hasn't finished initializing. This can take up to an hour. Try again later.
    // If after one hour you continue to receive this error, contact AWS Support
    // (https://console.aws.amazon.com/support/home#/).
    ErrCodeFinalizingOrganizationException = "FinalizingOrganizationException"

    // ErrCodeHandshakeAlreadyInStateException for service response error code
    // "HandshakeAlreadyInStateException".
    //
    // The specified handshake is already in the requested state. For example, you
    // can't accept a handshake that was already accepted.
    ErrCodeHandshakeAlreadyInStateException = "HandshakeAlreadyInStateException"

    // ErrCodeHandshakeConstraintViolationException for service response error code
    // "HandshakeConstraintViolationException".
    //
    // The requested operation would violate the constraint identified in the reason
    // code.
    //
    // Some of the reasons in the following list might not be applicable to this
    // specific API or operation:
    //
    //    * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
    //    the number of accounts in an organization. Note that deleted and closed
    //    accounts still count toward your limit. If you get this exception immediately
    //    after creating the organization, wait one hour and try again. If after
    //    an hour it continues to fail with this error, contact AWS Support (https://console.aws.amazon.com/support/home#/).
    //
    //    * ALREADY_IN_AN_ORGANIZATION: The handshake request is invalid because
    //    the invited account is already a member of an organization.
    //
    //    * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
    //    handshakes that you can send in one day.
    //
    //    * INVITE_DISABLED_DURING_ENABLE_ALL_FEATURES: You can't issue new invitations
    //    to join an organization while it's in the process of enabling all features.
    //    You can resume inviting accounts after you finalize the process when all
    //    accounts have agreed to the change.
    //
    //    * ORGANIZATION_ALREADY_HAS_ALL_FEATURES: The handshake request is invalid
    //    because the organization has already enabled all features.
    //
    //    * ORGANIZATION_FROM_DIFFERENT_SELLER_OF_RECORD: The request failed because
    //    the account is from a different marketplace than the accounts in the organization.
    //    For example, accounts with India addresses must be associated with the
    //    AISPL marketplace. All accounts in an organization must be from the same
    //    marketplace.
    //
    //    * ORGANIZATION_MEMBERSHIP_CHANGE_RATE_LIMIT_EXCEEDED: You attempted to
    //    change the membership of an account too quickly after its previous change.
    //
    //    * PAYMENT_INSTRUMENT_REQUIRED: You can't complete the operation with an
    //    account that doesn't have a payment instrument, such as a credit card,
    //    associated with it.
    ErrCodeHandshakeConstraintViolationException = "HandshakeConstraintViolationException"

    // ErrCodeHandshakeNotFoundException for service response error code
    // "HandshakeNotFoundException".
    //
    // We can't find a handshake with the HandshakeId that you specified.
    ErrCodeHandshakeNotFoundException = "HandshakeNotFoundException"

    // ErrCodeInvalidHandshakeTransitionException for service response error code
    // "InvalidHandshakeTransitionException".
    //
    // You can't perform the operation on the handshake in its current state. For
    // example, you can't cancel a handshake that was already accepted or accept
    // a handshake that was already declined.
    ErrCodeInvalidHandshakeTransitionException = "InvalidHandshakeTransitionException"

    // ErrCodeInvalidInputException for service response error code
    // "InvalidInputException".
    //
    // The requested operation failed because you provided invalid values for one
    // or more of the request parameters. This exception includes a reason that
    // contains additional information about the violated limit:
    //
    // Some of the reasons in the following list might not be applicable to this
    // specific API or operation:
    //
    //    * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
    //    can't be modified.
    //
    //    * INPUT_REQUIRED: You must include a value for all required parameters.
    //
    //    * INVALID_ENUM: You specified an invalid value.
    //
    //    * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
    //    characters.
    //
    //    * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
    //    at least one invalid value.
    //
    //    * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
    //    from the response to a previous call of the operation.
    //
    //    * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
    //    organization, or email) as a party.
    //
    //    * INVALID_PATTERN: You provided a value that doesn't match the required
    //    pattern.
    //
    //    * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
    //    match the required pattern.
    //
    //    * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
    //    name can't begin with the reserved prefix AWSServiceRoleFor.
    //
    //    * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
    //    Name (ARN) for the organization.
    //
    //    * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.
    //
    //    * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
    //    tag. You can’t add, edit, or delete system tag keys because they're
    //    reserved for AWS use. System tags don’t count against your tags per
    //    resource limit.
    //
    //    * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
    //    for the operation.
    //
    //    * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
    //    than allowed.
    //
    //    * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
    //    value than allowed.
    //
    //    * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
    //    than allowed.
    //
    //    * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
    //    value than allowed.
    //
    //    * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
    //    between entities in the same root.
    ErrCodeInvalidInputException = "InvalidInputException"

    // ErrCodeMalformedPolicyDocumentException for service response error code
    // "MalformedPolicyDocumentException".
    //
    // The provided policy document doesn't meet the requirements of the specified
    // policy type. For example, the syntax might be incorrect. For details about
    // service control policy syntax, see Service Control Policy Syntax (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_scp-syntax.html)
    // in the AWS Organizations User Guide.
    ErrCodeMalformedPolicyDocumentException = "MalformedPolicyDocumentException"

    // ErrCodeMasterCannotLeaveOrganizationException for service response error code
    // "MasterCannotLeaveOrganizationException".
    //
    // You can't remove a master account from an organization. If you want the master
    // account to become a member account in another organization, you must first
    // delete the current organization of the master account.
    ErrCodeMasterCannotLeaveOrganizationException = "MasterCannotLeaveOrganizationException"

    // ErrCodeOrganizationNotEmptyException for service response error code
    // "OrganizationNotEmptyException".
    //
    // The organization isn't empty. To delete an organization, you must first remove
    // all accounts except the master account, delete all OUs, and delete all policies.
    ErrCodeOrganizationNotEmptyException = "OrganizationNotEmptyException"

    // ErrCodeOrganizationalUnitNotEmptyException for service response error code
    // "OrganizationalUnitNotEmptyException".
    //
    // The specified OU is not empty. Move all accounts to another root or to other
    // OUs, remove all child OUs, and try the operation again.
    ErrCodeOrganizationalUnitNotEmptyException = "OrganizationalUnitNotEmptyException"

    // ErrCodeOrganizationalUnitNotFoundException for service response error code
    // "OrganizationalUnitNotFoundException".
    //
    // We can't find an OU with the OrganizationalUnitId that you specified.
    ErrCodeOrganizationalUnitNotFoundException = "OrganizationalUnitNotFoundException"

    // ErrCodeParentNotFoundException for service response error code
    // "ParentNotFoundException".
    //
    // We can't find a root or OU with the ParentId that you specified.
    ErrCodeParentNotFoundException = "ParentNotFoundException"

    // ErrCodePolicyInUseException for service response error code
    // "PolicyInUseException".
    //
    // The policy is attached to one or more entities. You must detach it from all
    // roots, OUs, and accounts before performing this operation.
    ErrCodePolicyInUseException = "PolicyInUseException"

    // ErrCodePolicyNotAttachedException for service response error code
    // "PolicyNotAttachedException".
    //
    // The policy isn't attached to the specified target in the specified root.
    ErrCodePolicyNotAttachedException = "PolicyNotAttachedException"

    // ErrCodePolicyNotFoundException for service response error code
    // "PolicyNotFoundException".
    //
    // We can't find a policy with the PolicyId that you specified.
    ErrCodePolicyNotFoundException = "PolicyNotFoundException"

    // ErrCodePolicyTypeAlreadyEnabledException for service response error code
    // "PolicyTypeAlreadyEnabledException".
    //
    // The specified policy type is already enabled in the specified root.
    ErrCodePolicyTypeAlreadyEnabledException = "PolicyTypeAlreadyEnabledException"

    // ErrCodePolicyTypeNotAvailableForOrganizationException for service response error code
    // "PolicyTypeNotAvailableForOrganizationException".
    //
    // You can't use the specified policy type with the feature set currently enabled
    // for this organization. For example, you can enable SCPs only after you enable
    // all features in the organization. For more information, see Enabling and
    // Disabling a Policy Type on a Root (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_policies.html#enable_policies_on_root)
    // in the AWS Organizations User Guide.
    ErrCodePolicyTypeNotAvailableForOrganizationException = "PolicyTypeNotAvailableForOrganizationException"

    // ErrCodePolicyTypeNotEnabledException for service response error code
    // "PolicyTypeNotEnabledException".
    //
    // The specified policy type isn't currently enabled in this root. You can't
    // attach policies of the specified type to entities in a root until you enable
    // that type in the root. For more information, see Enabling All Features in
    // Your Organization (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html)
    // in the AWS Organizations User Guide.
    ErrCodePolicyTypeNotEnabledException = "PolicyTypeNotEnabledException"

    // ErrCodeRootNotFoundException for service response error code
    // "RootNotFoundException".
    //
    // We can't find a root with the RootId that you specified.
    ErrCodeRootNotFoundException = "RootNotFoundException"

    // ErrCodeServiceException for service response error code
    // "ServiceException".
    //
    // AWS Organizations can't complete your request because of an internal service
    // error. Try again later.
    ErrCodeServiceException = "ServiceException"

    // ErrCodeSourceParentNotFoundException for service response error code
    // "SourceParentNotFoundException".
    //
    // We can't find a source root or OU with the ParentId that you specified.
    ErrCodeSourceParentNotFoundException = "SourceParentNotFoundException"

    // ErrCodeTargetNotFoundException for service response error code
    // "TargetNotFoundException".
    //
    // We can't find a root, OU, or account with the TargetId that you specified.
    ErrCodeTargetNotFoundException = "TargetNotFoundException"

    // ErrCodeTooManyRequestsException for service response error code
    // "TooManyRequestsException".
    //
    // You have sent too many requests in too short a period of time. The limit
    // helps protect against denial-of-service attacks. Try again later.
    //
    // For information on limits that affect AWS Organizations, see Limits of AWS
    // Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
    // in the AWS Organizations User Guide.
    ErrCodeTooManyRequestsException = "TooManyRequestsException"

    // ErrCodeUnsupportedAPIEndpointException for service response error code
    // "UnsupportedAPIEndpointException".
    //
    // This action isn't available in the current Region.
    ErrCodeUnsupportedAPIEndpointException = "UnsupportedAPIEndpointException"
)

const (
    ServiceName = "organizations" // Name of service.
    EndpointsID = ServiceName     // ID to lookup a service endpoint with.
    ServiceID   = "Organizations" // ServiceID is a unique identifer of a specific service.
)

const (
    // AccessDeniedForDependencyExceptionReasonAccessDeniedDuringCreateServiceLinkedRole is a AccessDeniedForDependencyExceptionReason enum value
    AccessDeniedForDependencyExceptionReasonAccessDeniedDuringCreateServiceLinkedRole = "ACCESS_DENIED_DURING_CREATE_SERVICE_LINKED_ROLE"
)

const (
    // PolicyTypeServiceControlPolicy is a PolicyType enum value
    PolicyTypeServiceControlPolicy = "SERVICE_CONTROL_POLICY"
)

type AcceptHandshakeInput ¶

type AcceptHandshakeInput struct {

    // The unique identifier (ID) of the handshake that you want to accept.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for handshake ID string
    // requires "h-" followed by from 8 to 32 lower-case letters or digits.
    //
    // HandshakeId is a required field
    HandshakeId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AcceptHandshakeInput) GoString ¶

func (s AcceptHandshakeInput) GoString() string

GoString returns the string representation

func (*AcceptHandshakeInput) SetHandshakeId ¶

func (s *AcceptHandshakeInput) SetHandshakeId(v string) *AcceptHandshakeInput

SetHandshakeId sets the HandshakeId field's value.

func (AcceptHandshakeInput) String ¶

func (s AcceptHandshakeInput) String() string

String returns the string representation

func (*AcceptHandshakeInput) Validate ¶

func (s *AcceptHandshakeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AcceptHandshakeOutput ¶

type AcceptHandshakeOutput struct {

    // A structure that contains details about the accepted handshake.
    Handshake *Handshake `type:"structure"`
    // contains filtered or unexported fields
}

func (AcceptHandshakeOutput) GoString ¶

func (s AcceptHandshakeOutput) GoString() string

GoString returns the string representation

func (*AcceptHandshakeOutput) SetHandshake ¶

func (s *AcceptHandshakeOutput) SetHandshake(v *Handshake) *AcceptHandshakeOutput

SetHandshake sets the Handshake field's value.

func (AcceptHandshakeOutput) String ¶

func (s AcceptHandshakeOutput) String() string

String returns the string representation

type Account ¶

type Account struct {

    // The Amazon Resource Name (ARN) of the account.
    //
    // For more information about ARNs in Organizations, see ARN Formats Supported
    // by Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_permissions.html#orgs-permissions-arns)
    // in the AWS Organizations User Guide.
    Arn *string `type:"string"`

    // The email address associated with the AWS account.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for this parameter is
    // a string of characters that represents a standard Internet email address.
    Email *string `min:"6" type:"string" sensitive:"true"`

    // The unique identifier (ID) of the account.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for an account ID string
    // requires exactly 12 digits.
    Id *string `type:"string"`

    // The method by which the account joined the organization.
    JoinedMethod *string `type:"string" enum:"AccountJoinedMethod"`

    // The date the account became a part of the organization.
    JoinedTimestamp *time.Time `type:"timestamp"`

    // The friendly name of the account.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) that is used to validate
    // this parameter is a string of any of the characters in the ASCII character
    // range.
    Name *string `min:"1" type:"string" sensitive:"true"`

    // The status of the account in the organization.
    Status *string `type:"string" enum:"AccountStatus"`
    // contains filtered or unexported fields
}

Contains information about an AWS account that is a member of an organization.

func (Account) GoString ¶

func (s Account) GoString() string

GoString returns the string representation

func (*Account) SetArn ¶

func (s *Account) SetArn(v string) *Account

SetArn sets the Arn field's value.

func (*Account) SetEmail ¶

func (s *Account) SetEmail(v string) *Account

SetEmail sets the Email field's value.

func (*Account) SetId ¶

func (s *Account) SetId(v string) *Account

SetId sets the Id field's value.

func (*Account) SetJoinedMethod ¶

func (s *Account) SetJoinedMethod(v string) *Account

SetJoinedMethod sets the JoinedMethod field's value.

func (*Account) SetJoinedTimestamp ¶

func (s *Account) SetJoinedTimestamp(v time.Time) *Account

SetJoinedTimestamp sets the JoinedTimestamp field's value.

func (*Account) SetName ¶

func (s *Account) SetName(v string) *Account

SetName sets the Name field's value.

func (*Account) SetStatus ¶

func (s *Account) SetStatus(v string) *Account

SetStatus sets the Status field's value.

func (Account) String ¶

func (s Account) String() string

String returns the string representation

type AttachPolicyInput ¶

type AttachPolicyInput struct {

    // The unique identifier (ID) of the policy that you want to attach to the target.
    // You can get the ID for the policy by calling the ListPolicies operation.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a policy ID string
    // requires "p-" followed by from 8 to 128 lower-case letters or digits.
    //
    // PolicyId is a required field
    PolicyId *string `type:"string" required:"true"`

    // The unique identifier (ID) of the root, OU, or account that you want to attach
    // the policy to. You can get the ID by calling the ListRoots, ListOrganizationalUnitsForParent,
    // or ListAccounts operations.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a target ID string
    // requires one of the following:
    //
    //    * Root - A string that begins with "r-" followed by from 4 to 32 lower-case
    //    letters or digits.
    //
    //    * Account - A string that consists of exactly 12 digits.
    //
    //    * Organizational unit (OU) - A string that begins with "ou-" followed
    //    by from 4 to 32 lower-case letters or digits (the ID of the root that
    //    the OU is in) followed by a second "-" dash and from 8 to 32 additional
    //    lower-case letters or digits.
    //
    // TargetId is a required field
    TargetId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (AttachPolicyInput) GoString ¶

func (s AttachPolicyInput) GoString() string

GoString returns the string representation

func (*AttachPolicyInput) SetPolicyId ¶

func (s *AttachPolicyInput) SetPolicyId(v string) *AttachPolicyInput

SetPolicyId sets the PolicyId field's value.

func (*AttachPolicyInput) SetTargetId ¶

func (s *AttachPolicyInput) SetTargetId(v string) *AttachPolicyInput

SetTargetId sets the TargetId field's value.

func (AttachPolicyInput) String ¶

func (s AttachPolicyInput) String() string

String returns the string representation

func (*AttachPolicyInput) Validate ¶

func (s *AttachPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type AttachPolicyOutput ¶

type AttachPolicyOutput struct {
    // contains filtered or unexported fields
}

func (AttachPolicyOutput) GoString ¶

func (s AttachPolicyOutput) GoString() string

GoString returns the string representation

func (AttachPolicyOutput) String ¶

func (s AttachPolicyOutput) String() string

String returns the string representation

type CancelHandshakeInput ¶

type CancelHandshakeInput struct {

    // The unique identifier (ID) of the handshake that you want to cancel. You
    // can get the ID from the ListHandshakesForOrganization operation.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for handshake ID string
    // requires "h-" followed by from 8 to 32 lower-case letters or digits.
    //
    // HandshakeId is a required field
    HandshakeId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (CancelHandshakeInput) GoString ¶

func (s CancelHandshakeInput) GoString() string

GoString returns the string representation

func (*CancelHandshakeInput) SetHandshakeId ¶

func (s *CancelHandshakeInput) SetHandshakeId(v string) *CancelHandshakeInput

SetHandshakeId sets the HandshakeId field's value.

func (CancelHandshakeInput) String ¶

func (s CancelHandshakeInput) String() string

String returns the string representation

func (*CancelHandshakeInput) Validate ¶

func (s *CancelHandshakeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CancelHandshakeOutput ¶

type CancelHandshakeOutput struct {

    // A structure that contains details about the handshake that you canceled.
    Handshake *Handshake `type:"structure"`
    // contains filtered or unexported fields
}

func (CancelHandshakeOutput) GoString ¶

func (s CancelHandshakeOutput) GoString() string

GoString returns the string representation

func (*CancelHandshakeOutput) SetHandshake ¶

func (s *CancelHandshakeOutput) SetHandshake(v *Handshake) *CancelHandshakeOutput

SetHandshake sets the Handshake field's value.

func (CancelHandshakeOutput) String ¶

func (s CancelHandshakeOutput) String() string

String returns the string representation

type Child ¶

type Child struct {

    // The unique identifier (ID) of this child entity.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a child ID string
    // requires one of the following:
    //
    //    * Account: a string that consists of exactly 12 digits.
    //
    //    * Organizational unit (OU): a string that begins with "ou-" followed by
    //    from 4 to 32 lower-case letters or digits (the ID of the root that contains
    //    the OU) followed by a second "-" dash and from 8 to 32 additional lower-case
    //    letters or digits.
    Id *string `type:"string"`

    // The type of this child entity.
    Type *string `type:"string" enum:"ChildType"`
    // contains filtered or unexported fields
}

Contains a list of child entities, either OUs or accounts.

func (Child) GoString ¶

func (s Child) GoString() string

GoString returns the string representation

func (*Child) SetId ¶

func (s *Child) SetId(v string) *Child

SetId sets the Id field's value.

func (*Child) SetType ¶

func (s *Child) SetType(v string) *Child

SetType sets the Type field's value.

func (Child) String ¶

func (s Child) String() string

String returns the string representation

type CreateAccountInput ¶

type CreateAccountInput struct {

    // The friendly name of the member account.
    //
    // AccountName is a required field
    AccountName *string `min:"1" type:"string" required:"true" sensitive:"true"`

    // The email address of the owner to assign to the new member account. This
    // email address must not already be associated with another AWS account. You
    // must use a valid email address to complete account creation. You can't access
    // the root user of the account or remove an account that was created with an
    // invalid email address.
    //
    // Email is a required field
    Email *string `min:"6" type:"string" required:"true" sensitive:"true"`

    // If set to ALLOW, the new account enables IAM users to access account billing
    // information if they have the required permissions. If set to DENY, only the
    // root user of the new account can access account billing information. For
    // more information, see Activating Access to the Billing and Cost Management
    // Console (https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/grantaccess.html#ControllingAccessWebsite-Activate)
    // in the AWS Billing and Cost Management User Guide.
    //
    // If you don't specify this parameter, the value defaults to ALLOW, and IAM
    // users and roles with the required permissions can access billing information
    // for the new account.
    IamUserAccessToBilling *string `type:"string" enum:"IAMUserAccessToBilling"`

    // (Optional)
    //
    // The name of an IAM role that AWS Organizations automatically preconfigures
    // in the new member account. This role trusts the master account, allowing
    // users in the master account to assume the role, as permitted by the master
    // account administrator. The role has administrator permissions in the new
    // member account.
    //
    // If you don't specify this parameter, the role name defaults to OrganizationAccountAccessRole.
    //
    // For more information about how to use this role to access the member account,
    // see Accessing and Administering the Member Accounts in Your Organization
    // (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_access.html#orgs_manage_accounts_create-cross-account-role)
    // in the AWS Organizations User Guide, and steps 2 and 3 in Tutorial: Delegate
    // Access Across AWS Accounts Using IAM Roles (https://docs.aws.amazon.com/IAM/latest/UserGuide/tutorial_cross-account-with-roles.html)
    // in the IAM User Guide.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) that is used to validate
    // this parameter is a string of characters that can consist of uppercase letters,
    // lowercase letters, digits with no spaces, and any of the following characters:
    // =,.@-
    RoleName *string `type:"string"`
    // contains filtered or unexported fields
}

func (CreateAccountInput) GoString ¶

func (s CreateAccountInput) GoString() string

GoString returns the string representation

func (*CreateAccountInput) SetAccountName ¶

func (s *CreateAccountInput) SetAccountName(v string) *CreateAccountInput

SetAccountName sets the AccountName field's value.

func (*CreateAccountInput) SetEmail ¶

func (s *CreateAccountInput) SetEmail(v string) *CreateAccountInput

SetEmail sets the Email field's value.

func (*CreateAccountInput) SetIamUserAccessToBilling ¶

func (s *CreateAccountInput) SetIamUserAccessToBilling(v string) *CreateAccountInput

SetIamUserAccessToBilling sets the IamUserAccessToBilling field's value.

func (*CreateAccountInput) SetRoleName ¶

func (s *CreateAccountInput) SetRoleName(v string) *CreateAccountInput

SetRoleName sets the RoleName field's value.

func (CreateAccountInput) String ¶

func (s CreateAccountInput) String() string

String returns the string representation

func (*CreateAccountInput) Validate ¶

func (s *CreateAccountInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateAccountOutput ¶

type CreateAccountOutput struct {

    // A structure that contains details about the request to create an account.
    // This response structure might not be fully populated when you first receive
    // it because account creation is an asynchronous process. You can pass the
    // returned CreateAccountStatus ID as a parameter to DescribeCreateAccountStatus
    // to get status about the progress of the request at later times. You can also
    // check the AWS CloudTrail log for the CreateAccountResult event. For more
    // information, see Monitoring the Activity in Your Organization (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_monitoring.html)
    // in the AWS Organizations User Guide.
    CreateAccountStatus *CreateAccountStatus `type:"structure"`
    // contains filtered or unexported fields
}

func (CreateAccountOutput) GoString ¶

func (s CreateAccountOutput) GoString() string

GoString returns the string representation

func (*CreateAccountOutput) SetCreateAccountStatus ¶

func (s *CreateAccountOutput) SetCreateAccountStatus(v *CreateAccountStatus) *CreateAccountOutput

SetCreateAccountStatus sets the CreateAccountStatus field's value.

func (CreateAccountOutput) String ¶

func (s CreateAccountOutput) String() string

String returns the string representation

type CreateAccountStatus ¶

type CreateAccountStatus struct {

    // If the account was created successfully, the unique identifier (ID) of the
    // new account.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for an account ID string
    // requires exactly 12 digits.
    AccountId *string `type:"string"`

    // The account name given to the account when it was created.
    AccountName *string `min:"1" type:"string" sensitive:"true"`

    // The date and time that the account was created and the request completed.
    CompletedTimestamp *time.Time `type:"timestamp"`

    // If the request failed, a description of the reason for the failure.
    //
    //    * ACCOUNT_LIMIT_EXCEEDED: The account could not be created because you
    //    have reached the limit on the number of accounts in your organization.
    //
    //    * EMAIL_ALREADY_EXISTS: The account could not be created because another
    //    AWS account with that email address already exists.
    //
    //    * GOVCLOUD_ACCOUNT_ALREADY_EXISTS: The account in the AWS GovCloud (US)
    //    Region could not be created because this Region already includes an account
    //    with that email address.
    //
    //    * INVALID_ADDRESS: The account could not be created because the address
    //    you provided is not valid.
    //
    //    * INVALID_EMAIL: The account could not be created because the email address
    //    you provided is not valid.
    //
    //    * INTERNAL_FAILURE: The account could not be created because of an internal
    //    failure. Try again later. If the problem persists, contact Customer Support.
    FailureReason *string `type:"string" enum:"CreateAccountFailureReason"`

    // If the account was created successfully, the unique identifier (ID) of the
    // new account in the AWS GovCloud (US) Region.
    GovCloudAccountId *string `type:"string"`

    // The unique identifier (ID) that references this request. You get this value
    // from the response of the initial CreateAccount request to create the account.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for an create account
    // request ID string requires "car-" followed by from 8 to 32 lower-case letters
    // or digits.
    Id *string `type:"string"`

    // The date and time that the request was made for the account creation.
    RequestedTimestamp *time.Time `type:"timestamp"`

    // The status of the request.
    State *string `type:"string" enum:"CreateAccountState"`
    // contains filtered or unexported fields
}

Contains the status about a CreateAccount or CreateGovCloudAccount request to create an AWS account or an AWS GovCloud (US) account in an organization.

func (CreateAccountStatus) GoString ¶

func (s CreateAccountStatus) GoString() string

GoString returns the string representation

func (*CreateAccountStatus) SetAccountId ¶

func (s *CreateAccountStatus) SetAccountId(v string) *CreateAccountStatus

SetAccountId sets the AccountId field's value.

func (*CreateAccountStatus) SetAccountName ¶

func (s *CreateAccountStatus) SetAccountName(v string) *CreateAccountStatus

SetAccountName sets the AccountName field's value.

func (*CreateAccountStatus) SetCompletedTimestamp ¶

func (s *CreateAccountStatus) SetCompletedTimestamp(v time.Time) *CreateAccountStatus

SetCompletedTimestamp sets the CompletedTimestamp field's value.

func (*CreateAccountStatus) SetFailureReason ¶

func (s *CreateAccountStatus) SetFailureReason(v string) *CreateAccountStatus

SetFailureReason sets the FailureReason field's value.

func (*CreateAccountStatus) SetGovCloudAccountId ¶

func (s *CreateAccountStatus) SetGovCloudAccountId(v string) *CreateAccountStatus

SetGovCloudAccountId sets the GovCloudAccountId field's value.

func (*CreateAccountStatus) SetId ¶

func (s *CreateAccountStatus) SetId(v string) *CreateAccountStatus

SetId sets the Id field's value.

func (*CreateAccountStatus) SetRequestedTimestamp ¶

func (s *CreateAccountStatus) SetRequestedTimestamp(v time.Time) *CreateAccountStatus

SetRequestedTimestamp sets the RequestedTimestamp field's value.

func (*CreateAccountStatus) SetState ¶

func (s *CreateAccountStatus) SetState(v string) *CreateAccountStatus

SetState sets the State field's value.

func (CreateAccountStatus) String ¶

func (s CreateAccountStatus) String() string

String returns the string representation

type CreateGovCloudAccountInput ¶

type CreateGovCloudAccountInput struct {

    // The friendly name of the member account.
    //
    // AccountName is a required field
    AccountName *string `min:"1" type:"string" required:"true" sensitive:"true"`

    // The email address of the owner to assign to the new member account in the
    // commercial Region. This email address must not already be associated with
    // another AWS account. You must use a valid email address to complete account
    // creation. You can't access the root user of the account or remove an account
    // that was created with an invalid email address. Like all request parameters
    // for CreateGovCloudAccount, the request for the email address for the AWS
    // GovCloud (US) account originates from the commercial Region, not from the
    // AWS GovCloud (US) Region.
    //
    // Email is a required field
    Email *string `min:"6" type:"string" required:"true" sensitive:"true"`

    // If set to ALLOW, the new linked account in the commercial Region enables
    // IAM users to access account billing information if they have the required
    // permissions. If set to DENY, only the root user of the new account can access
    // account billing information. For more information, see Activating Access
    // to the Billing and Cost Management Console (https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/grantaccess.html#ControllingAccessWebsite-Activate)
    // in the AWS Billing and Cost Management User Guide.
    //
    // If you don't specify this parameter, the value defaults to ALLOW, and IAM
    // users and roles with the required permissions can access billing information
    // for the new account.
    IamUserAccessToBilling *string `type:"string" enum:"IAMUserAccessToBilling"`

    // (Optional)
    //
    // The name of an IAM role that AWS Organizations automatically preconfigures
    // in the new member accounts in both the AWS GovCloud (US) Region and in the
    // commercial Region. This role trusts the master account, allowing users in
    // the master account to assume the role, as permitted by the master account
    // administrator. The role has administrator permissions in the new member account.
    //
    // If you don't specify this parameter, the role name defaults to OrganizationAccountAccessRole.
    //
    // For more information about how to use this role to access the member account,
    // see Accessing and Administering the Member Accounts in Your Organization
    // (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_access.html#orgs_manage_accounts_create-cross-account-role)
    // in the AWS Organizations User Guide and steps 2 and 3 in Tutorial: Delegate
    // Access Across AWS Accounts Using IAM Roles (https://docs.aws.amazon.com/IAM/latest/UserGuide/tutorial_cross-account-with-roles.html)
    // in the IAM User Guide.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) that is used to validate
    // this parameter is a string of characters that can consist of uppercase letters,
    // lowercase letters, digits with no spaces, and any of the following characters:
    // =,.@-
    RoleName *string `type:"string"`
    // contains filtered or unexported fields
}

func (CreateGovCloudAccountInput) GoString ¶

func (s CreateGovCloudAccountInput) GoString() string

GoString returns the string representation

func (*CreateGovCloudAccountInput) SetAccountName ¶

func (s *CreateGovCloudAccountInput) SetAccountName(v string) *CreateGovCloudAccountInput

SetAccountName sets the AccountName field's value.

func (*CreateGovCloudAccountInput) SetEmail ¶

func (s *CreateGovCloudAccountInput) SetEmail(v string) *CreateGovCloudAccountInput

SetEmail sets the Email field's value.

func (*CreateGovCloudAccountInput) SetIamUserAccessToBilling ¶

func (s *CreateGovCloudAccountInput) SetIamUserAccessToBilling(v string) *CreateGovCloudAccountInput

SetIamUserAccessToBilling sets the IamUserAccessToBilling field's value.

func (*CreateGovCloudAccountInput) SetRoleName ¶

func (s *CreateGovCloudAccountInput) SetRoleName(v string) *CreateGovCloudAccountInput

SetRoleName sets the RoleName field's value.

func (CreateGovCloudAccountInput) String ¶

func (s CreateGovCloudAccountInput) String() string

String returns the string representation

func (*CreateGovCloudAccountInput) Validate ¶

func (s *CreateGovCloudAccountInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateGovCloudAccountOutput ¶

type CreateGovCloudAccountOutput struct {

    // Contains the status about a CreateAccount or CreateGovCloudAccount request
    // to create an AWS account or an AWS GovCloud (US) account in an organization.
    CreateAccountStatus *CreateAccountStatus `type:"structure"`
    // contains filtered or unexported fields
}

func (CreateGovCloudAccountOutput) GoString ¶

func (s CreateGovCloudAccountOutput) GoString() string

GoString returns the string representation

func (*CreateGovCloudAccountOutput) SetCreateAccountStatus ¶

func (s *CreateGovCloudAccountOutput) SetCreateAccountStatus(v *CreateAccountStatus) *CreateGovCloudAccountOutput

SetCreateAccountStatus sets the CreateAccountStatus field's value.

func (CreateGovCloudAccountOutput) String ¶

func (s CreateGovCloudAccountOutput) String() string

String returns the string representation

type CreateOrganizationInput ¶

type CreateOrganizationInput struct {

    // Specifies the feature set supported by the new organization. Each feature
    // set supports different levels of functionality.
    //
    //    * CONSOLIDATED_BILLING: All member accounts have their bills consolidated
    //    to and paid by the master account. For more information, see Consolidated
    //    billing (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#feature-set-cb-only)
    //    in the AWS Organizations User Guide. The consolidated billing feature
    //    subset isn't available for organizations in the AWS GovCloud (US) Region.
    //
    //    * ALL: In addition to all the features supported by the consolidated billing
    //    feature set, the master account can also apply any policy type to any
    //    member account in the organization. For more information, see All features
    //    (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_getting-started_concepts.html#feature-set-all)
    //    in the AWS Organizations User Guide.
    FeatureSet *string `type:"string" enum:"OrganizationFeatureSet"`
    // contains filtered or unexported fields
}

func (CreateOrganizationInput) GoString ¶

func (s CreateOrganizationInput) GoString() string

GoString returns the string representation

func (*CreateOrganizationInput) SetFeatureSet ¶

func (s *CreateOrganizationInput) SetFeatureSet(v string) *CreateOrganizationInput

SetFeatureSet sets the FeatureSet field's value.

func (CreateOrganizationInput) String ¶

func (s CreateOrganizationInput) String() string

String returns the string representation

type CreateOrganizationOutput ¶

type CreateOrganizationOutput struct {

    // A structure that contains details about the newly created organization.
    Organization *Organization `type:"structure"`
    // contains filtered or unexported fields
}

func (CreateOrganizationOutput) GoString ¶

func (s CreateOrganizationOutput) GoString() string

GoString returns the string representation

func (*CreateOrganizationOutput) SetOrganization ¶

func (s *CreateOrganizationOutput) SetOrganization(v *Organization) *CreateOrganizationOutput

SetOrganization sets the Organization field's value.

func (CreateOrganizationOutput) String ¶

func (s CreateOrganizationOutput) String() string

String returns the string representation

type CreateOrganizationalUnitInput ¶

type CreateOrganizationalUnitInput struct {

    // The friendly name to assign to the new OU.
    //
    // Name is a required field
    Name *string `min:"1" type:"string" required:"true"`

    // The unique identifier (ID) of the parent root or OU that you want to create
    // the new OU in.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a parent ID string
    // requires one of the following:
    //
    //    * Root - A string that begins with "r-" followed by from 4 to 32 lower-case
    //    letters or digits.
    //
    //    * Organizational unit (OU) - A string that begins with "ou-" followed
    //    by from 4 to 32 lower-case letters or digits (the ID of the root that
    //    the OU is in) followed by a second "-" dash and from 8 to 32 additional
    //    lower-case letters or digits.
    //
    // ParentId is a required field
    ParentId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (CreateOrganizationalUnitInput) GoString ¶

func (s CreateOrganizationalUnitInput) GoString() string

GoString returns the string representation

func (*CreateOrganizationalUnitInput) SetName ¶

func (s *CreateOrganizationalUnitInput) SetName(v string) *CreateOrganizationalUnitInput

SetName sets the Name field's value.

func (*CreateOrganizationalUnitInput) SetParentId ¶

func (s *CreateOrganizationalUnitInput) SetParentId(v string) *CreateOrganizationalUnitInput

SetParentId sets the ParentId field's value.

func (CreateOrganizationalUnitInput) String ¶

func (s CreateOrganizationalUnitInput) String() string

String returns the string representation

func (*CreateOrganizationalUnitInput) Validate ¶

func (s *CreateOrganizationalUnitInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreateOrganizationalUnitOutput ¶

type CreateOrganizationalUnitOutput struct {

    // A structure that contains details about the newly created OU.
    OrganizationalUnit *OrganizationalUnit `type:"structure"`
    // contains filtered or unexported fields
}

func (CreateOrganizationalUnitOutput) GoString ¶

func (s CreateOrganizationalUnitOutput) GoString() string

GoString returns the string representation

func (*CreateOrganizationalUnitOutput) SetOrganizationalUnit ¶

func (s *CreateOrganizationalUnitOutput) SetOrganizationalUnit(v *OrganizationalUnit) *CreateOrganizationalUnitOutput

SetOrganizationalUnit sets the OrganizationalUnit field's value.

func (CreateOrganizationalUnitOutput) String ¶

func (s CreateOrganizationalUnitOutput) String() string

String returns the string representation

type CreatePolicyInput ¶

type CreatePolicyInput struct {

    // The policy content to add to the new policy. For example, if you create a
    // service control policy (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_policies_scp.html)
    // (SCP), this string must be JSON text that specifies the permissions that
    // admins in attached accounts can delegate to their users, groups, and roles.
    // For more information about the SCP syntax, see Service Control Policy Syntax
    // (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_scp-syntax.html)
    // in the AWS Organizations User Guide.
    //
    // Content is a required field
    Content *string `min:"1" type:"string" required:"true"`

    // An optional description to assign to the policy.
    //
    // Description is a required field
    Description *string `type:"string" required:"true"`

    // The friendly name to assign to the policy.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) that is used to validate
    // this parameter is a string of any of the characters in the ASCII character
    // range.
    //
    // Name is a required field
    Name *string `min:"1" type:"string" required:"true"`

    // The type of policy to create.
    //
    // In the current release, the only type of policy that you can create is a
    // service control policy (SCP).
    //
    // Type is a required field
    Type *string `type:"string" required:"true" enum:"PolicyType"`
    // contains filtered or unexported fields
}

func (CreatePolicyInput) GoString ¶

func (s CreatePolicyInput) GoString() string

GoString returns the string representation

func (*CreatePolicyInput) SetContent ¶

func (s *CreatePolicyInput) SetContent(v string) *CreatePolicyInput

SetContent sets the Content field's value.

func (*CreatePolicyInput) SetDescription ¶

func (s *CreatePolicyInput) SetDescription(v string) *CreatePolicyInput

SetDescription sets the Description field's value.

func (*CreatePolicyInput) SetName ¶

func (s *CreatePolicyInput) SetName(v string) *CreatePolicyInput

SetName sets the Name field's value.

func (*CreatePolicyInput) SetType ¶

func (s *CreatePolicyInput) SetType(v string) *CreatePolicyInput

SetType sets the Type field's value.

func (CreatePolicyInput) String ¶

func (s CreatePolicyInput) String() string

String returns the string representation

func (*CreatePolicyInput) Validate ¶

func (s *CreatePolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type CreatePolicyOutput ¶

type CreatePolicyOutput struct {

    // A structure that contains details about the newly created policy.
    Policy *Policy `type:"structure"`
    // contains filtered or unexported fields
}

func (CreatePolicyOutput) GoString ¶

func (s CreatePolicyOutput) GoString() string

GoString returns the string representation

func (*CreatePolicyOutput) SetPolicy ¶

func (s *CreatePolicyOutput) SetPolicy(v *Policy) *CreatePolicyOutput

SetPolicy sets the Policy field's value.

func (CreatePolicyOutput) String ¶

func (s CreatePolicyOutput) String() string

String returns the string representation

type DeclineHandshakeInput ¶

type DeclineHandshakeInput struct {

    // The unique identifier (ID) of the handshake that you want to decline. You
    // can get the ID from the ListHandshakesForAccount operation.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for handshake ID string
    // requires "h-" followed by from 8 to 32 lower-case letters or digits.
    //
    // HandshakeId is a required field
    HandshakeId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeclineHandshakeInput) GoString ¶

func (s DeclineHandshakeInput) GoString() string

GoString returns the string representation

func (*DeclineHandshakeInput) SetHandshakeId ¶

func (s *DeclineHandshakeInput) SetHandshakeId(v string) *DeclineHandshakeInput

SetHandshakeId sets the HandshakeId field's value.

func (DeclineHandshakeInput) String ¶

func (s DeclineHandshakeInput) String() string

String returns the string representation

func (*DeclineHandshakeInput) Validate ¶

func (s *DeclineHandshakeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeclineHandshakeOutput ¶

type DeclineHandshakeOutput struct {

    // A structure that contains details about the declined handshake. The state
    // is updated to show the value DECLINED.
    Handshake *Handshake `type:"structure"`
    // contains filtered or unexported fields
}

func (DeclineHandshakeOutput) GoString ¶

func (s DeclineHandshakeOutput) GoString() string

GoString returns the string representation

func (*DeclineHandshakeOutput) SetHandshake ¶

func (s *DeclineHandshakeOutput) SetHandshake(v *Handshake) *DeclineHandshakeOutput

SetHandshake sets the Handshake field's value.

func (DeclineHandshakeOutput) String ¶

func (s DeclineHandshakeOutput) String() string

String returns the string representation

type DeleteOrganizationInput ¶

type DeleteOrganizationInput struct {
    // contains filtered or unexported fields
}

func (DeleteOrganizationInput) GoString ¶

func (s DeleteOrganizationInput) GoString() string

GoString returns the string representation

func (DeleteOrganizationInput) String ¶

func (s DeleteOrganizationInput) String() string

String returns the string representation

type DeleteOrganizationOutput ¶

type DeleteOrganizationOutput struct {
    // contains filtered or unexported fields
}

func (DeleteOrganizationOutput) GoString ¶

func (s DeleteOrganizationOutput) GoString() string

GoString returns the string representation

func (DeleteOrganizationOutput) String ¶

func (s DeleteOrganizationOutput) String() string

String returns the string representation

type DeleteOrganizationalUnitInput ¶

type DeleteOrganizationalUnitInput struct {

    // The unique identifier (ID) of the organizational unit that you want to delete.
    // You can get the ID from the ListOrganizationalUnitsForParent operation.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for an organizational
    // unit ID string requires "ou-" followed by from 4 to 32 lower-case letters
    // or digits (the ID of the root that contains the OU) followed by a second
    // "-" dash and from 8 to 32 additional lower-case letters or digits.
    //
    // OrganizationalUnitId is a required field
    OrganizationalUnitId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeleteOrganizationalUnitInput) GoString ¶

func (s DeleteOrganizationalUnitInput) GoString() string

GoString returns the string representation

func (*DeleteOrganizationalUnitInput) SetOrganizationalUnitId ¶

func (s *DeleteOrganizationalUnitInput) SetOrganizationalUnitId(v string) *DeleteOrganizationalUnitInput

SetOrganizationalUnitId sets the OrganizationalUnitId field's value.

func (DeleteOrganizationalUnitInput) String ¶

func (s DeleteOrganizationalUnitInput) String() string

String returns the string representation

func (*DeleteOrganizationalUnitInput) Validate ¶

func (s *DeleteOrganizationalUnitInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeleteOrganizationalUnitOutput ¶

type DeleteOrganizationalUnitOutput struct {
    // contains filtered or unexported fields
}

func (DeleteOrganizationalUnitOutput) GoString ¶

func (s DeleteOrganizationalUnitOutput) GoString() string

GoString returns the string representation

func (DeleteOrganizationalUnitOutput) String ¶

func (s DeleteOrganizationalUnitOutput) String() string

String returns the string representation

type DeletePolicyInput ¶

type DeletePolicyInput struct {

    // The unique identifier (ID) of the policy that you want to delete. You can
    // get the ID from the ListPolicies or ListPoliciesForTarget operations.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a policy ID string
    // requires "p-" followed by from 8 to 128 lower-case letters or digits.
    //
    // PolicyId is a required field
    PolicyId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DeletePolicyInput) GoString ¶

func (s DeletePolicyInput) GoString() string

GoString returns the string representation

func (*DeletePolicyInput) SetPolicyId ¶

func (s *DeletePolicyInput) SetPolicyId(v string) *DeletePolicyInput

SetPolicyId sets the PolicyId field's value.

func (DeletePolicyInput) String ¶

func (s DeletePolicyInput) String() string

String returns the string representation

func (*DeletePolicyInput) Validate ¶

func (s *DeletePolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DeletePolicyOutput ¶

type DeletePolicyOutput struct {
    // contains filtered or unexported fields
}

func (DeletePolicyOutput) GoString ¶

func (s DeletePolicyOutput) GoString() string

GoString returns the string representation

func (DeletePolicyOutput) String ¶

func (s DeletePolicyOutput) String() string

String returns the string representation

type DescribeAccountInput ¶

type DescribeAccountInput struct {

    // The unique identifier (ID) of the AWS account that you want information about.
    // You can get the ID from the ListAccounts or ListAccountsForParent operations.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for an account ID string
    // requires exactly 12 digits.
    //
    // AccountId is a required field
    AccountId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeAccountInput) GoString ¶

func (s DescribeAccountInput) GoString() string

GoString returns the string representation

func (*DescribeAccountInput) SetAccountId ¶

func (s *DescribeAccountInput) SetAccountId(v string) *DescribeAccountInput

SetAccountId sets the AccountId field's value.

func (DescribeAccountInput) String ¶

func (s DescribeAccountInput) String() string

String returns the string representation

func (*DescribeAccountInput) Validate ¶

func (s *DescribeAccountInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeAccountOutput ¶

type DescribeAccountOutput struct {

    // A structure that contains information about the requested account.
    Account *Account `type:"structure"`
    // contains filtered or unexported fields
}

func (DescribeAccountOutput) GoString ¶

func (s DescribeAccountOutput) GoString() string

GoString returns the string representation

func (*DescribeAccountOutput) SetAccount ¶

func (s *DescribeAccountOutput) SetAccount(v *Account) *DescribeAccountOutput

SetAccount sets the Account field's value.

func (DescribeAccountOutput) String ¶

func (s DescribeAccountOutput) String() string

String returns the string representation

type DescribeCreateAccountStatusInput ¶

type DescribeCreateAccountStatusInput struct {

    // Specifies the operationId that uniquely identifies the request. You can get
    // the ID from the response to an earlier CreateAccount request, or from the
    // ListCreateAccountStatus operation.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a create account
    // request ID string requires "car-" followed by from 8 to 32 lower-case letters
    // or digits.
    //
    // CreateAccountRequestId is a required field
    CreateAccountRequestId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeCreateAccountStatusInput) GoString ¶

func (s DescribeCreateAccountStatusInput) GoString() string

GoString returns the string representation

func (*DescribeCreateAccountStatusInput) SetCreateAccountRequestId ¶

func (s *DescribeCreateAccountStatusInput) SetCreateAccountRequestId(v string) *DescribeCreateAccountStatusInput

SetCreateAccountRequestId sets the CreateAccountRequestId field's value.

func (DescribeCreateAccountStatusInput) String ¶

func (s DescribeCreateAccountStatusInput) String() string

String returns the string representation

func (*DescribeCreateAccountStatusInput) Validate ¶

func (s *DescribeCreateAccountStatusInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeCreateAccountStatusOutput ¶

type DescribeCreateAccountStatusOutput struct {

    // A structure that contains the current status of an account creation request.
    CreateAccountStatus *CreateAccountStatus `type:"structure"`
    // contains filtered or unexported fields
}

func (DescribeCreateAccountStatusOutput) GoString ¶

func (s DescribeCreateAccountStatusOutput) GoString() string

GoString returns the string representation

func (*DescribeCreateAccountStatusOutput) SetCreateAccountStatus ¶

func (s *DescribeCreateAccountStatusOutput) SetCreateAccountStatus(v *CreateAccountStatus) *DescribeCreateAccountStatusOutput

SetCreateAccountStatus sets the CreateAccountStatus field's value.

func (DescribeCreateAccountStatusOutput) String ¶

func (s DescribeCreateAccountStatusOutput) String() string

String returns the string representation

type DescribeHandshakeInput ¶

type DescribeHandshakeInput struct {

    // The unique identifier (ID) of the handshake that you want information about.
    // You can get the ID from the original call to InviteAccountToOrganization,
    // or from a call to ListHandshakesForAccount or ListHandshakesForOrganization.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for handshake ID string
    // requires "h-" followed by from 8 to 32 lower-case letters or digits.
    //
    // HandshakeId is a required field
    HandshakeId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeHandshakeInput) GoString ¶

func (s DescribeHandshakeInput) GoString() string

GoString returns the string representation

func (*DescribeHandshakeInput) SetHandshakeId ¶

func (s *DescribeHandshakeInput) SetHandshakeId(v string) *DescribeHandshakeInput

SetHandshakeId sets the HandshakeId field's value.

func (DescribeHandshakeInput) String ¶

func (s DescribeHandshakeInput) String() string

String returns the string representation

func (*DescribeHandshakeInput) Validate ¶

func (s *DescribeHandshakeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeHandshakeOutput ¶

type DescribeHandshakeOutput struct {

    // A structure that contains information about the specified handshake.
    Handshake *Handshake `type:"structure"`
    // contains filtered or unexported fields
}

func (DescribeHandshakeOutput) GoString ¶

func (s DescribeHandshakeOutput) GoString() string

GoString returns the string representation

func (*DescribeHandshakeOutput) SetHandshake ¶

func (s *DescribeHandshakeOutput) SetHandshake(v *Handshake) *DescribeHandshakeOutput

SetHandshake sets the Handshake field's value.

func (DescribeHandshakeOutput) String ¶

func (s DescribeHandshakeOutput) String() string

String returns the string representation

type DescribeOrganizationInput ¶

type DescribeOrganizationInput struct {
    // contains filtered or unexported fields
}

func (DescribeOrganizationInput) GoString ¶

func (s DescribeOrganizationInput) GoString() string

GoString returns the string representation

func (DescribeOrganizationInput) String ¶

func (s DescribeOrganizationInput) String() string

String returns the string representation

type DescribeOrganizationOutput ¶

type DescribeOrganizationOutput struct {

    // A structure that contains information about the organization.
    Organization *Organization `type:"structure"`
    // contains filtered or unexported fields
}

func (DescribeOrganizationOutput) GoString ¶

func (s DescribeOrganizationOutput) GoString() string

GoString returns the string representation

func (*DescribeOrganizationOutput) SetOrganization ¶

func (s *DescribeOrganizationOutput) SetOrganization(v *Organization) *DescribeOrganizationOutput

SetOrganization sets the Organization field's value.

func (DescribeOrganizationOutput) String ¶

func (s DescribeOrganizationOutput) String() string

String returns the string representation

type DescribeOrganizationalUnitInput ¶

type DescribeOrganizationalUnitInput struct {

    // The unique identifier (ID) of the organizational unit that you want details
    // about. You can get the ID from the ListOrganizationalUnitsForParent operation.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for an organizational
    // unit ID string requires "ou-" followed by from 4 to 32 lower-case letters
    // or digits (the ID of the root that contains the OU) followed by a second
    // "-" dash and from 8 to 32 additional lower-case letters or digits.
    //
    // OrganizationalUnitId is a required field
    OrganizationalUnitId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DescribeOrganizationalUnitInput) GoString ¶

func (s DescribeOrganizationalUnitInput) GoString() string

GoString returns the string representation

func (*DescribeOrganizationalUnitInput) SetOrganizationalUnitId ¶

func (s *DescribeOrganizationalUnitInput) SetOrganizationalUnitId(v string) *DescribeOrganizationalUnitInput

SetOrganizationalUnitId sets the OrganizationalUnitId field's value.

func (DescribeOrganizationalUnitInput) String ¶

func (s DescribeOrganizationalUnitInput) String() string

String returns the string representation

func (*DescribeOrganizationalUnitInput) Validate ¶

func (s *DescribeOrganizationalUnitInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribeOrganizationalUnitOutput ¶

type DescribeOrganizationalUnitOutput struct {

    // A structure that contains details about the specified OU.
    OrganizationalUnit *OrganizationalUnit `type:"structure"`
    // contains filtered or unexported fields
}

func (DescribeOrganizationalUnitOutput) GoString ¶

func (s DescribeOrganizationalUnitOutput) GoString() string

GoString returns the string representation

func (*DescribeOrganizationalUnitOutput) SetOrganizationalUnit ¶

func (s *DescribeOrganizationalUnitOutput) SetOrganizationalUnit(v *OrganizationalUnit) *DescribeOrganizationalUnitOutput

SetOrganizationalUnit sets the OrganizationalUnit field's value.

func (DescribeOrganizationalUnitOutput) String ¶

func (s DescribeOrganizationalUnitOutput) String() string

String returns the string representation

type DescribePolicyInput ¶

type DescribePolicyInput struct {

    // The unique identifier (ID) of the policy that you want details about. You
    // can get the ID from the ListPolicies or ListPoliciesForTarget operations.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a policy ID string
    // requires "p-" followed by from 8 to 128 lower-case letters or digits.
    //
    // PolicyId is a required field
    PolicyId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DescribePolicyInput) GoString ¶

func (s DescribePolicyInput) GoString() string

GoString returns the string representation

func (*DescribePolicyInput) SetPolicyId ¶

func (s *DescribePolicyInput) SetPolicyId(v string) *DescribePolicyInput

SetPolicyId sets the PolicyId field's value.

func (DescribePolicyInput) String ¶

func (s DescribePolicyInput) String() string

String returns the string representation

func (*DescribePolicyInput) Validate ¶

func (s *DescribePolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DescribePolicyOutput ¶

type DescribePolicyOutput struct {

    // A structure that contains details about the specified policy.
    Policy *Policy `type:"structure"`
    // contains filtered or unexported fields
}

func (DescribePolicyOutput) GoString ¶

func (s DescribePolicyOutput) GoString() string

GoString returns the string representation

func (*DescribePolicyOutput) SetPolicy ¶

func (s *DescribePolicyOutput) SetPolicy(v *Policy) *DescribePolicyOutput

SetPolicy sets the Policy field's value.

func (DescribePolicyOutput) String ¶

func (s DescribePolicyOutput) String() string

String returns the string representation

type DetachPolicyInput ¶

type DetachPolicyInput struct {

    // The unique identifier (ID) of the policy you want to detach. You can get
    // the ID from the ListPolicies or ListPoliciesForTarget operations.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a policy ID string
    // requires "p-" followed by from 8 to 128 lower-case letters or digits.
    //
    // PolicyId is a required field
    PolicyId *string `type:"string" required:"true"`

    // The unique identifier (ID) of the root, OU, or account that you want to detach
    // the policy from. You can get the ID from the ListRoots, ListOrganizationalUnitsForParent,
    // or ListAccounts operations.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a target ID string
    // requires one of the following:
    //
    //    * Root - A string that begins with "r-" followed by from 4 to 32 lower-case
    //    letters or digits.
    //
    //    * Account - A string that consists of exactly 12 digits.
    //
    //    * Organizational unit (OU) - A string that begins with "ou-" followed
    //    by from 4 to 32 lower-case letters or digits (the ID of the root that
    //    the OU is in) followed by a second "-" dash and from 8 to 32 additional
    //    lower-case letters or digits.
    //
    // TargetId is a required field
    TargetId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DetachPolicyInput) GoString ¶

func (s DetachPolicyInput) GoString() string

GoString returns the string representation

func (*DetachPolicyInput) SetPolicyId ¶

func (s *DetachPolicyInput) SetPolicyId(v string) *DetachPolicyInput

SetPolicyId sets the PolicyId field's value.

func (*DetachPolicyInput) SetTargetId ¶

func (s *DetachPolicyInput) SetTargetId(v string) *DetachPolicyInput

SetTargetId sets the TargetId field's value.

func (DetachPolicyInput) String ¶

func (s DetachPolicyInput) String() string

String returns the string representation

func (*DetachPolicyInput) Validate ¶

func (s *DetachPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DetachPolicyOutput ¶

type DetachPolicyOutput struct {
    // contains filtered or unexported fields
}

func (DetachPolicyOutput) GoString ¶

func (s DetachPolicyOutput) GoString() string

GoString returns the string representation

func (DetachPolicyOutput) String ¶

func (s DetachPolicyOutput) String() string

String returns the string representation

type DisableAWSServiceAccessInput ¶

type DisableAWSServiceAccessInput struct {

    // The service principal name of the AWS service for which you want to disable
    // integration with your organization. This is typically in the form of a URL,
    // such as service-abbreviation.amazonaws.com.
    //
    // ServicePrincipal is a required field
    ServicePrincipal *string `min:"1" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DisableAWSServiceAccessInput) GoString ¶

func (s DisableAWSServiceAccessInput) GoString() string

GoString returns the string representation

func (*DisableAWSServiceAccessInput) SetServicePrincipal ¶

func (s *DisableAWSServiceAccessInput) SetServicePrincipal(v string) *DisableAWSServiceAccessInput

SetServicePrincipal sets the ServicePrincipal field's value.

func (DisableAWSServiceAccessInput) String ¶

func (s DisableAWSServiceAccessInput) String() string

String returns the string representation

func (*DisableAWSServiceAccessInput) Validate ¶

func (s *DisableAWSServiceAccessInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisableAWSServiceAccessOutput ¶

type DisableAWSServiceAccessOutput struct {
    // contains filtered or unexported fields
}

func (DisableAWSServiceAccessOutput) GoString ¶

func (s DisableAWSServiceAccessOutput) GoString() string

GoString returns the string representation

func (DisableAWSServiceAccessOutput) String ¶

func (s DisableAWSServiceAccessOutput) String() string

String returns the string representation

type DisablePolicyTypeInput ¶

type DisablePolicyTypeInput struct {

    // The policy type that you want to disable in this root.
    //
    // PolicyType is a required field
    PolicyType *string `type:"string" required:"true" enum:"PolicyType"`

    // The unique identifier (ID) of the root in which you want to disable a policy
    // type. You can get the ID from the ListRoots operation.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a root ID string
    // requires "r-" followed by from 4 to 32 lower-case letters or digits.
    //
    // RootId is a required field
    RootId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (DisablePolicyTypeInput) GoString ¶

func (s DisablePolicyTypeInput) GoString() string

GoString returns the string representation

func (*DisablePolicyTypeInput) SetPolicyType ¶

func (s *DisablePolicyTypeInput) SetPolicyType(v string) *DisablePolicyTypeInput

SetPolicyType sets the PolicyType field's value.

func (*DisablePolicyTypeInput) SetRootId ¶

func (s *DisablePolicyTypeInput) SetRootId(v string) *DisablePolicyTypeInput

SetRootId sets the RootId field's value.

func (DisablePolicyTypeInput) String ¶

func (s DisablePolicyTypeInput) String() string

String returns the string representation

func (*DisablePolicyTypeInput) Validate ¶

func (s *DisablePolicyTypeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type DisablePolicyTypeOutput ¶

type DisablePolicyTypeOutput struct {

    // A structure that shows the root with the updated list of enabled policy types.
    Root *Root `type:"structure"`
    // contains filtered or unexported fields
}

func (DisablePolicyTypeOutput) GoString ¶

func (s DisablePolicyTypeOutput) GoString() string

GoString returns the string representation

func (*DisablePolicyTypeOutput) SetRoot ¶

func (s *DisablePolicyTypeOutput) SetRoot(v *Root) *DisablePolicyTypeOutput

SetRoot sets the Root field's value.

func (DisablePolicyTypeOutput) String ¶

func (s DisablePolicyTypeOutput) String() string

String returns the string representation

type EnableAWSServiceAccessInput ¶

type EnableAWSServiceAccessInput struct {

    // The service principal name of the AWS service for which you want to enable
    // integration with your organization. This is typically in the form of a URL,
    // such as service-abbreviation.amazonaws.com.
    //
    // ServicePrincipal is a required field
    ServicePrincipal *string `min:"1" type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (EnableAWSServiceAccessInput) GoString ¶

func (s EnableAWSServiceAccessInput) GoString() string

GoString returns the string representation

func (*EnableAWSServiceAccessInput) SetServicePrincipal ¶

func (s *EnableAWSServiceAccessInput) SetServicePrincipal(v string) *EnableAWSServiceAccessInput

SetServicePrincipal sets the ServicePrincipal field's value.

func (EnableAWSServiceAccessInput) String ¶

func (s EnableAWSServiceAccessInput) String() string

String returns the string representation

func (*EnableAWSServiceAccessInput) Validate ¶

func (s *EnableAWSServiceAccessInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type EnableAWSServiceAccessOutput ¶

type EnableAWSServiceAccessOutput struct {
    // contains filtered or unexported fields
}

func (EnableAWSServiceAccessOutput) GoString ¶

func (s EnableAWSServiceAccessOutput) GoString() string

GoString returns the string representation

func (EnableAWSServiceAccessOutput) String ¶

func (s EnableAWSServiceAccessOutput) String() string

String returns the string representation

type EnableAllFeaturesInput ¶

type EnableAllFeaturesInput struct {
    // contains filtered or unexported fields
}

func (EnableAllFeaturesInput) GoString ¶

func (s EnableAllFeaturesInput) GoString() string

GoString returns the string representation

func (EnableAllFeaturesInput) String ¶

func (s EnableAllFeaturesInput) String() string

String returns the string representation

type EnableAllFeaturesOutput ¶

type EnableAllFeaturesOutput struct {

    // A structure that contains details about the handshake created to support
    // this request to enable all features in the organization.
    Handshake *Handshake `type:"structure"`
    // contains filtered or unexported fields
}

func (EnableAllFeaturesOutput) GoString ¶

func (s EnableAllFeaturesOutput) GoString() string

GoString returns the string representation

func (*EnableAllFeaturesOutput) SetHandshake ¶

func (s *EnableAllFeaturesOutput) SetHandshake(v *Handshake) *EnableAllFeaturesOutput

SetHandshake sets the Handshake field's value.

func (EnableAllFeaturesOutput) String ¶

func (s EnableAllFeaturesOutput) String() string

String returns the string representation

type EnablePolicyTypeInput ¶

type EnablePolicyTypeInput struct {

    // The policy type that you want to enable.
    //
    // PolicyType is a required field
    PolicyType *string `type:"string" required:"true" enum:"PolicyType"`

    // The unique identifier (ID) of the root in which you want to enable a policy
    // type. You can get the ID from the ListRoots operation.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a root ID string
    // requires "r-" followed by from 4 to 32 lower-case letters or digits.
    //
    // RootId is a required field
    RootId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (EnablePolicyTypeInput) GoString ¶

func (s EnablePolicyTypeInput) GoString() string

GoString returns the string representation

func (*EnablePolicyTypeInput) SetPolicyType ¶

func (s *EnablePolicyTypeInput) SetPolicyType(v string) *EnablePolicyTypeInput

SetPolicyType sets the PolicyType field's value.

func (*EnablePolicyTypeInput) SetRootId ¶

func (s *EnablePolicyTypeInput) SetRootId(v string) *EnablePolicyTypeInput

SetRootId sets the RootId field's value.

func (EnablePolicyTypeInput) String ¶

func (s EnablePolicyTypeInput) String() string

String returns the string representation

func (*EnablePolicyTypeInput) Validate ¶

func (s *EnablePolicyTypeInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type EnablePolicyTypeOutput ¶

type EnablePolicyTypeOutput struct {

    // A structure that shows the root with the updated list of enabled policy types.
    Root *Root `type:"structure"`
    // contains filtered or unexported fields
}

func (EnablePolicyTypeOutput) GoString ¶

func (s EnablePolicyTypeOutput) GoString() string

GoString returns the string representation

func (*EnablePolicyTypeOutput) SetRoot ¶

func (s *EnablePolicyTypeOutput) SetRoot(v *Root) *EnablePolicyTypeOutput

SetRoot sets the Root field's value.

func (EnablePolicyTypeOutput) String ¶

func (s EnablePolicyTypeOutput) String() string

String returns the string representation

type EnabledServicePrincipal ¶

type EnabledServicePrincipal struct {

    // The date that the service principal was enabled for integration with AWS
    // Organizations.
    DateEnabled *time.Time `type:"timestamp"`

    // The name of the service principal. This is typically in the form of a URL,
    // such as: servicename.amazonaws.com.
    ServicePrincipal *string `min:"1" type:"string"`
    // contains filtered or unexported fields
}

A structure that contains details of a service principal that is enabled to integrate with AWS Organizations.

func (EnabledServicePrincipal) GoString ¶

func (s EnabledServicePrincipal) GoString() string

GoString returns the string representation

func (*EnabledServicePrincipal) SetDateEnabled ¶

func (s *EnabledServicePrincipal) SetDateEnabled(v time.Time) *EnabledServicePrincipal

SetDateEnabled sets the DateEnabled field's value.

func (*EnabledServicePrincipal) SetServicePrincipal ¶

func (s *EnabledServicePrincipal) SetServicePrincipal(v string) *EnabledServicePrincipal

SetServicePrincipal sets the ServicePrincipal field's value.

func (EnabledServicePrincipal) String ¶

func (s EnabledServicePrincipal) String() string

String returns the string representation

type Handshake ¶

type Handshake struct {

    // The type of handshake, indicating what action occurs when the recipient accepts
    // the handshake. The following handshake types are supported:
    //
    //    * INVITE: This type of handshake represents a request to join an organization.
    //    It is always sent from the master account to only non-member accounts.
    //
    //    * ENABLE_ALL_FEATURES: This type of handshake represents a request to
    //    enable all features in an organization. It is always sent from the master
    //    account to only invited member accounts. Created accounts do not receive
    //    this because those accounts were created by the organization's master
    //    account and approval is inferred.
    //
    //    * APPROVE_ALL_FEATURES: This type of handshake is sent from the Organizations
    //    service when all member accounts have approved the ENABLE_ALL_FEATURES
    //    invitation. It is sent only to the master account and signals the master
    //    that it can finalize the process to enable all features.
    Action *string `type:"string" enum:"ActionType"`

    // The Amazon Resource Name (ARN) of a handshake.
    //
    // For more information about ARNs in Organizations, see ARN Formats Supported
    // by Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_permissions.html#orgs-permissions-arns)
    // in the AWS Organizations User Guide.
    Arn *string `type:"string"`

    // The date and time that the handshake expires. If the recipient of the handshake
    // request fails to respond before the specified date and time, the handshake
    // becomes inactive and is no longer valid.
    ExpirationTimestamp *time.Time `type:"timestamp"`

    // The unique identifier (ID) of a handshake. The originating account creates
    // the ID when it initiates the handshake.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for handshake ID string
    // requires "h-" followed by from 8 to 32 lower-case letters or digits.
    Id *string `type:"string"`

    // Information about the two accounts that are participating in the handshake.
    Parties []*HandshakeParty `type:"list"`

    // The date and time that the handshake request was made.
    RequestedTimestamp *time.Time `type:"timestamp"`

    // Additional information that is needed to process the handshake.
    Resources []*HandshakeResource `type:"list"`

    // The current state of the handshake. Use the state to trace the flow of the
    // handshake through the process from its creation to its acceptance. The meaning
    // of each of the valid values is as follows:
    //
    //    * REQUESTED: This handshake was sent to multiple recipients (applicable
    //    to only some handshake types) and not all recipients have responded yet.
    //    The request stays in this state until all recipients respond.
    //
    //    * OPEN: This handshake was sent to multiple recipients (applicable to
    //    only some policy types) and all recipients have responded, allowing the
    //    originator to complete the handshake action.
    //
    //    * CANCELED: This handshake is no longer active because it was canceled
    //    by the originating account.
    //
    //    * ACCEPTED: This handshake is complete because it has been accepted by
    //    the recipient.
    //
    //    * DECLINED: This handshake is no longer active because it was declined
    //    by the recipient account.
    //
    //    * EXPIRED: This handshake is no longer active because the originator did
    //    not receive a response of any kind from the recipient before the expiration
    //    time (15 days).
    State *string `type:"string" enum:"HandshakeState"`
    // contains filtered or unexported fields
}

Contains information that must be exchanged to securely establish a relationship between two accounts (an originator and a recipient). For example, when a master account (the originator) invites another account (the recipient) to join its organization, the two accounts exchange information as a series of handshake requests and responses.

Note: Handshakes that are CANCELED, ACCEPTED, or DECLINED show up in lists for only 30 days after entering that state After that they are deleted.

func (Handshake) GoString ¶

func (s Handshake) GoString() string

GoString returns the string representation

func (*Handshake) SetAction ¶

func (s *Handshake) SetAction(v string) *Handshake

SetAction sets the Action field's value.

func (*Handshake) SetArn ¶

func (s *Handshake) SetArn(v string) *Handshake

SetArn sets the Arn field's value.

func (*Handshake) SetExpirationTimestamp ¶

func (s *Handshake) SetExpirationTimestamp(v time.Time) *Handshake

SetExpirationTimestamp sets the ExpirationTimestamp field's value.

func (*Handshake) SetId ¶

func (s *Handshake) SetId(v string) *Handshake

SetId sets the Id field's value.

func (*Handshake) SetParties ¶

func (s *Handshake) SetParties(v []*HandshakeParty) *Handshake

SetParties sets the Parties field's value.

func (*Handshake) SetRequestedTimestamp ¶

func (s *Handshake) SetRequestedTimestamp(v time.Time) *Handshake

SetRequestedTimestamp sets the RequestedTimestamp field's value.

func (*Handshake) SetResources ¶

func (s *Handshake) SetResources(v []*HandshakeResource) *Handshake

SetResources sets the Resources field's value.

func (*Handshake) SetState ¶

func (s *Handshake) SetState(v string) *Handshake

SetState sets the State field's value.

func (Handshake) String ¶

func (s Handshake) String() string

String returns the string representation

type HandshakeFilter ¶

type HandshakeFilter struct {

    // Specifies the type of handshake action.
    //
    // If you specify ActionType, you cannot also specify ParentHandshakeId.
    ActionType *string `type:"string" enum:"ActionType"`

    // Specifies the parent handshake. Only used for handshake types that are a
    // child of another type.
    //
    // If you specify ParentHandshakeId, you cannot also specify ActionType.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for handshake ID string
    // requires "h-" followed by from 8 to 32 lower-case letters or digits.
    ParentHandshakeId *string `type:"string"`
    // contains filtered or unexported fields
}

Specifies the criteria that are used to select the handshakes for the operation.

func (HandshakeFilter) GoString ¶

func (s HandshakeFilter) GoString() string

GoString returns the string representation

func (*HandshakeFilter) SetActionType ¶

func (s *HandshakeFilter) SetActionType(v string) *HandshakeFilter

SetActionType sets the ActionType field's value.

func (*HandshakeFilter) SetParentHandshakeId ¶

func (s *HandshakeFilter) SetParentHandshakeId(v string) *HandshakeFilter

SetParentHandshakeId sets the ParentHandshakeId field's value.

func (HandshakeFilter) String ¶

func (s HandshakeFilter) String() string

String returns the string representation

type HandshakeParty ¶

type HandshakeParty struct {

    // The unique identifier (ID) for the party.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for handshake ID string
    // requires "h-" followed by from 8 to 32 lower-case letters or digits.
    //
    // Id is a required field
    Id *string `min:"1" type:"string" required:"true" sensitive:"true"`

    // The type of party.
    //
    // Type is a required field
    Type *string `type:"string" required:"true" enum:"HandshakePartyType"`
    // contains filtered or unexported fields
}

Identifies a participant in a handshake.

func (HandshakeParty) GoString ¶

func (s HandshakeParty) GoString() string

GoString returns the string representation

func (*HandshakeParty) SetId ¶

func (s *HandshakeParty) SetId(v string) *HandshakeParty

SetId sets the Id field's value.

func (*HandshakeParty) SetType ¶

func (s *HandshakeParty) SetType(v string) *HandshakeParty

SetType sets the Type field's value.

func (HandshakeParty) String ¶

func (s HandshakeParty) String() string

String returns the string representation

func (*HandshakeParty) Validate ¶

func (s *HandshakeParty) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type HandshakeResource ¶

type HandshakeResource struct {

    // When needed, contains an additional array of HandshakeResource objects.
    Resources []*HandshakeResource `type:"list"`

    // The type of information being passed, specifying how the value is to be interpreted
    // by the other party:
    //
    //    * ACCOUNT - Specifies an AWS account ID number.
    //
    //    * ORGANIZATION - Specifies an organization ID number.
    //
    //    * EMAIL - Specifies the email address that is associated with the account
    //    that receives the handshake.
    //
    //    * OWNER_EMAIL - Specifies the email address associated with the master
    //    account. Included as information about an organization.
    //
    //    * OWNER_NAME - Specifies the name associated with the master account.
    //    Included as information about an organization.
    //
    //    * NOTES - Additional text provided by the handshake initiator and intended
    //    for the recipient to read.
    Type *string `type:"string" enum:"HandshakeResourceType"`

    // The information that is passed to the other party in the handshake. The format
    // of the value string must match the requirements of the specified type.
    Value *string `type:"string" sensitive:"true"`
    // contains filtered or unexported fields
}

Contains additional data that is needed to process a handshake.

func (HandshakeResource) GoString ¶

func (s HandshakeResource) GoString() string

GoString returns the string representation

func (*HandshakeResource) SetResources ¶

func (s *HandshakeResource) SetResources(v []*HandshakeResource) *HandshakeResource

SetResources sets the Resources field's value.

func (*HandshakeResource) SetType ¶

func (s *HandshakeResource) SetType(v string) *HandshakeResource

SetType sets the Type field's value.

func (*HandshakeResource) SetValue ¶

func (s *HandshakeResource) SetValue(v string) *HandshakeResource

SetValue sets the Value field's value.

func (HandshakeResource) String ¶

func (s HandshakeResource) String() string

String returns the string representation

type InviteAccountToOrganizationInput ¶

type InviteAccountToOrganizationInput struct {

    // Additional information that you want to include in the generated email to
    // the recipient account owner.
    Notes *string `type:"string" sensitive:"true"`

    // The identifier (ID) of the AWS account that you want to invite to join your
    // organization. This is a JSON object that contains the following elements:
    //
    // { "Type": "ACCOUNT", "Id": "< account id number >" }
    //
    // If you use the AWS CLI, you can submit this as a single string, similar to
    // the following example:
    //
    // --target Id=123456789012,Type=ACCOUNT
    //
    // If you specify "Type": "ACCOUNT", you must provide the AWS account ID number
    // as the Id. If you specify "Type": "EMAIL", you must specify the email address
    // that is associated with the account.
    //
    // --target Id=diego@example.com,Type=EMAIL
    //
    // Target is a required field
    Target *HandshakeParty `type:"structure" required:"true"`
    // contains filtered or unexported fields
}

func (InviteAccountToOrganizationInput) GoString ¶

func (s InviteAccountToOrganizationInput) GoString() string

GoString returns the string representation

func (*InviteAccountToOrganizationInput) SetNotes ¶

func (s *InviteAccountToOrganizationInput) SetNotes(v string) *InviteAccountToOrganizationInput

SetNotes sets the Notes field's value.

func (*InviteAccountToOrganizationInput) SetTarget ¶

func (s *InviteAccountToOrganizationInput) SetTarget(v *HandshakeParty) *InviteAccountToOrganizationInput

SetTarget sets the Target field's value.

func (InviteAccountToOrganizationInput) String ¶

func (s InviteAccountToOrganizationInput) String() string

String returns the string representation

func (*InviteAccountToOrganizationInput) Validate ¶

func (s *InviteAccountToOrganizationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type InviteAccountToOrganizationOutput ¶

type InviteAccountToOrganizationOutput struct {

    // A structure that contains details about the handshake that is created to
    // support this invitation request.
    Handshake *Handshake `type:"structure"`
    // contains filtered or unexported fields
}

func (InviteAccountToOrganizationOutput) GoString ¶

func (s InviteAccountToOrganizationOutput) GoString() string

GoString returns the string representation

func (*InviteAccountToOrganizationOutput) SetHandshake ¶

func (s *InviteAccountToOrganizationOutput) SetHandshake(v *Handshake) *InviteAccountToOrganizationOutput

SetHandshake sets the Handshake field's value.

func (InviteAccountToOrganizationOutput) String ¶

func (s InviteAccountToOrganizationOutput) String() string

String returns the string representation

type LeaveOrganizationInput ¶

type LeaveOrganizationInput struct {
    // contains filtered or unexported fields
}

func (LeaveOrganizationInput) GoString ¶

func (s LeaveOrganizationInput) GoString() string

GoString returns the string representation

func (LeaveOrganizationInput) String ¶

func (s LeaveOrganizationInput) String() string

String returns the string representation

type LeaveOrganizationOutput ¶

type LeaveOrganizationOutput struct {
    // contains filtered or unexported fields
}

func (LeaveOrganizationOutput) GoString ¶

func (s LeaveOrganizationOutput) GoString() string

GoString returns the string representation

func (LeaveOrganizationOutput) String ¶

func (s LeaveOrganizationOutput) String() string

String returns the string representation

type ListAWSServiceAccessForOrganizationInput ¶

type ListAWSServiceAccessForOrganizationInput struct {

    // (Optional) Use this to limit the number of results you want included per
    // page in the response. If you do not include this parameter, it defaults to
    // a value that is specific to the operation. If additional items exist beyond
    // the maximum you specify, the NextToken response element is present and has
    // a value (is not null). Include that value as the NextToken request parameter
    // in the next call to the operation to get the next part of the results. Note
    // that Organizations might return fewer results than the maximum even when
    // there are more results available. You should check NextToken after every
    // operation to ensure that you receive all of the results.
    MaxResults *int64 `min:"1" type:"integer"`

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListAWSServiceAccessForOrganizationInput) GoString ¶

func (s ListAWSServiceAccessForOrganizationInput) GoString() string

GoString returns the string representation

func (*ListAWSServiceAccessForOrganizationInput) SetMaxResults ¶

func (s *ListAWSServiceAccessForOrganizationInput) SetMaxResults(v int64) *ListAWSServiceAccessForOrganizationInput

SetMaxResults sets the MaxResults field's value.

func (*ListAWSServiceAccessForOrganizationInput) SetNextToken ¶

func (s *ListAWSServiceAccessForOrganizationInput) SetNextToken(v string) *ListAWSServiceAccessForOrganizationInput

SetNextToken sets the NextToken field's value.

func (ListAWSServiceAccessForOrganizationInput) String ¶

func (s ListAWSServiceAccessForOrganizationInput) String() string

String returns the string representation

func (*ListAWSServiceAccessForOrganizationInput) Validate ¶

func (s *ListAWSServiceAccessForOrganizationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListAWSServiceAccessForOrganizationOutput ¶

type ListAWSServiceAccessForOrganizationOutput struct {

    // A list of the service principals for the services that are enabled to integrate
    // with your organization. Each principal is a structure that includes the name
    // and the date that it was enabled for integration with AWS Organizations.
    EnabledServicePrincipals []*EnabledServicePrincipal `type:"list"`

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListAWSServiceAccessForOrganizationOutput) GoString ¶

func (s ListAWSServiceAccessForOrganizationOutput) GoString() string

GoString returns the string representation

func (*ListAWSServiceAccessForOrganizationOutput) SetEnabledServicePrincipals ¶

func (s *ListAWSServiceAccessForOrganizationOutput) SetEnabledServicePrincipals(v []*EnabledServicePrincipal) *ListAWSServiceAccessForOrganizationOutput

SetEnabledServicePrincipals sets the EnabledServicePrincipals field's value.

func (*ListAWSServiceAccessForOrganizationOutput) SetNextToken ¶

func (s *ListAWSServiceAccessForOrganizationOutput) SetNextToken(v string) *ListAWSServiceAccessForOrganizationOutput

SetNextToken sets the NextToken field's value.

func (ListAWSServiceAccessForOrganizationOutput) String ¶

func (s ListAWSServiceAccessForOrganizationOutput) String() string

String returns the string representation

type ListAccountsForParentInput ¶

type ListAccountsForParentInput struct {

    // (Optional) Use this to limit the number of results you want included per
    // page in the response. If you do not include this parameter, it defaults to
    // a value that is specific to the operation. If additional items exist beyond
    // the maximum you specify, the NextToken response element is present and has
    // a value (is not null). Include that value as the NextToken request parameter
    // in the next call to the operation to get the next part of the results. Note
    // that Organizations might return fewer results than the maximum even when
    // there are more results available. You should check NextToken after every
    // operation to ensure that you receive all of the results.
    MaxResults *int64 `min:"1" type:"integer"`

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`

    // The unique identifier (ID) for the parent root or organization unit (OU)
    // whose accounts you want to list.
    //
    // ParentId is a required field
    ParentId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (ListAccountsForParentInput) GoString ¶

func (s ListAccountsForParentInput) GoString() string

GoString returns the string representation

func (*ListAccountsForParentInput) SetMaxResults ¶

func (s *ListAccountsForParentInput) SetMaxResults(v int64) *ListAccountsForParentInput

SetMaxResults sets the MaxResults field's value.

func (*ListAccountsForParentInput) SetNextToken ¶

func (s *ListAccountsForParentInput) SetNextToken(v string) *ListAccountsForParentInput

SetNextToken sets the NextToken field's value.

func (*ListAccountsForParentInput) SetParentId ¶

func (s *ListAccountsForParentInput) SetParentId(v string) *ListAccountsForParentInput

SetParentId sets the ParentId field's value.

func (ListAccountsForParentInput) String ¶

func (s ListAccountsForParentInput) String() string

String returns the string representation

func (*ListAccountsForParentInput) Validate ¶

func (s *ListAccountsForParentInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListAccountsForParentOutput ¶

type ListAccountsForParentOutput struct {

    // A list of the accounts in the specified root or OU.
    Accounts []*Account `type:"list"`

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListAccountsForParentOutput) GoString ¶

func (s ListAccountsForParentOutput) GoString() string

GoString returns the string representation

func (*ListAccountsForParentOutput) SetAccounts ¶

func (s *ListAccountsForParentOutput) SetAccounts(v []*Account) *ListAccountsForParentOutput

SetAccounts sets the Accounts field's value.

func (*ListAccountsForParentOutput) SetNextToken ¶

func (s *ListAccountsForParentOutput) SetNextToken(v string) *ListAccountsForParentOutput

SetNextToken sets the NextToken field's value.

func (ListAccountsForParentOutput) String ¶

func (s ListAccountsForParentOutput) String() string

String returns the string representation

type ListAccountsInput ¶

type ListAccountsInput struct {

    // (Optional) Use this to limit the number of results you want included per
    // page in the response. If you do not include this parameter, it defaults to
    // a value that is specific to the operation. If additional items exist beyond
    // the maximum you specify, the NextToken response element is present and has
    // a value (is not null). Include that value as the NextToken request parameter
    // in the next call to the operation to get the next part of the results. Note
    // that Organizations might return fewer results than the maximum even when
    // there are more results available. You should check NextToken after every
    // operation to ensure that you receive all of the results.
    MaxResults *int64 `min:"1" type:"integer"`

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListAccountsInput) GoString ¶

func (s ListAccountsInput) GoString() string

GoString returns the string representation

func (*ListAccountsInput) SetMaxResults ¶

func (s *ListAccountsInput) SetMaxResults(v int64) *ListAccountsInput

SetMaxResults sets the MaxResults field's value.

func (*ListAccountsInput) SetNextToken ¶

func (s *ListAccountsInput) SetNextToken(v string) *ListAccountsInput

SetNextToken sets the NextToken field's value.

func (ListAccountsInput) String ¶

func (s ListAccountsInput) String() string

String returns the string representation

func (*ListAccountsInput) Validate ¶

func (s *ListAccountsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListAccountsOutput ¶

type ListAccountsOutput struct {

    // A list of objects in the organization.
    Accounts []*Account `type:"list"`

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListAccountsOutput) GoString ¶

func (s ListAccountsOutput) GoString() string

GoString returns the string representation

func (*ListAccountsOutput) SetAccounts ¶

func (s *ListAccountsOutput) SetAccounts(v []*Account) *ListAccountsOutput

SetAccounts sets the Accounts field's value.

func (*ListAccountsOutput) SetNextToken ¶

func (s *ListAccountsOutput) SetNextToken(v string) *ListAccountsOutput

SetNextToken sets the NextToken field's value.

func (ListAccountsOutput) String ¶

func (s ListAccountsOutput) String() string

String returns the string representation

type ListChildrenInput ¶

type ListChildrenInput struct {

    // Filters the output to include only the specified child type.
    //
    // ChildType is a required field
    ChildType *string `type:"string" required:"true" enum:"ChildType"`

    // (Optional) Use this to limit the number of results you want included per
    // page in the response. If you do not include this parameter, it defaults to
    // a value that is specific to the operation. If additional items exist beyond
    // the maximum you specify, the NextToken response element is present and has
    // a value (is not null). Include that value as the NextToken request parameter
    // in the next call to the operation to get the next part of the results. Note
    // that Organizations might return fewer results than the maximum even when
    // there are more results available. You should check NextToken after every
    // operation to ensure that you receive all of the results.
    MaxResults *int64 `min:"1" type:"integer"`

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`

    // The unique identifier (ID) for the parent root or OU whose children you want
    // to list.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a parent ID string
    // requires one of the following:
    //
    //    * Root - A string that begins with "r-" followed by from 4 to 32 lower-case
    //    letters or digits.
    //
    //    * Organizational unit (OU) - A string that begins with "ou-" followed
    //    by from 4 to 32 lower-case letters or digits (the ID of the root that
    //    the OU is in) followed by a second "-" dash and from 8 to 32 additional
    //    lower-case letters or digits.
    //
    // ParentId is a required field
    ParentId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (ListChildrenInput) GoString ¶

func (s ListChildrenInput) GoString() string

GoString returns the string representation

func (*ListChildrenInput) SetChildType ¶

func (s *ListChildrenInput) SetChildType(v string) *ListChildrenInput

SetChildType sets the ChildType field's value.

func (*ListChildrenInput) SetMaxResults ¶

func (s *ListChildrenInput) SetMaxResults(v int64) *ListChildrenInput

SetMaxResults sets the MaxResults field's value.

func (*ListChildrenInput) SetNextToken ¶

func (s *ListChildrenInput) SetNextToken(v string) *ListChildrenInput

SetNextToken sets the NextToken field's value.

func (*ListChildrenInput) SetParentId ¶

func (s *ListChildrenInput) SetParentId(v string) *ListChildrenInput

SetParentId sets the ParentId field's value.

func (ListChildrenInput) String ¶

func (s ListChildrenInput) String() string

String returns the string representation

func (*ListChildrenInput) Validate ¶

func (s *ListChildrenInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListChildrenOutput ¶

type ListChildrenOutput struct {

    // The list of children of the specified parent container.
    Children []*Child `type:"list"`

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListChildrenOutput) GoString ¶

func (s ListChildrenOutput) GoString() string

GoString returns the string representation

func (*ListChildrenOutput) SetChildren ¶

func (s *ListChildrenOutput) SetChildren(v []*Child) *ListChildrenOutput

SetChildren sets the Children field's value.

func (*ListChildrenOutput) SetNextToken ¶

func (s *ListChildrenOutput) SetNextToken(v string) *ListChildrenOutput

SetNextToken sets the NextToken field's value.

func (ListChildrenOutput) String ¶

func (s ListChildrenOutput) String() string

String returns the string representation

type ListCreateAccountStatusInput ¶

type ListCreateAccountStatusInput struct {

    // (Optional) Use this to limit the number of results you want included per
    // page in the response. If you do not include this parameter, it defaults to
    // a value that is specific to the operation. If additional items exist beyond
    // the maximum you specify, the NextToken response element is present and has
    // a value (is not null). Include that value as the NextToken request parameter
    // in the next call to the operation to get the next part of the results. Note
    // that Organizations might return fewer results than the maximum even when
    // there are more results available. You should check NextToken after every
    // operation to ensure that you receive all of the results.
    MaxResults *int64 `min:"1" type:"integer"`

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`

    // A list of one or more states that you want included in the response. If this
    // parameter isn't present, all requests are included in the response.
    States []*string `type:"list"`
    // contains filtered or unexported fields
}

func (ListCreateAccountStatusInput) GoString ¶

func (s ListCreateAccountStatusInput) GoString() string

GoString returns the string representation

func (*ListCreateAccountStatusInput) SetMaxResults ¶

func (s *ListCreateAccountStatusInput) SetMaxResults(v int64) *ListCreateAccountStatusInput

SetMaxResults sets the MaxResults field's value.

func (*ListCreateAccountStatusInput) SetNextToken ¶

func (s *ListCreateAccountStatusInput) SetNextToken(v string) *ListCreateAccountStatusInput

SetNextToken sets the NextToken field's value.

func (*ListCreateAccountStatusInput) SetStates ¶

func (s *ListCreateAccountStatusInput) SetStates(v []*string) *ListCreateAccountStatusInput

SetStates sets the States field's value.

func (ListCreateAccountStatusInput) String ¶

func (s ListCreateAccountStatusInput) String() string

String returns the string representation

func (*ListCreateAccountStatusInput) Validate ¶

func (s *ListCreateAccountStatusInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListCreateAccountStatusOutput ¶

type ListCreateAccountStatusOutput struct {

    // A list of objects with details about the requests. Certain elements, such
    // as the accountId number, are present in the output only after the account
    // has been successfully created.
    CreateAccountStatuses []*CreateAccountStatus `type:"list"`

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListCreateAccountStatusOutput) GoString ¶

func (s ListCreateAccountStatusOutput) GoString() string

GoString returns the string representation

func (*ListCreateAccountStatusOutput) SetCreateAccountStatuses ¶

func (s *ListCreateAccountStatusOutput) SetCreateAccountStatuses(v []*CreateAccountStatus) *ListCreateAccountStatusOutput

SetCreateAccountStatuses sets the CreateAccountStatuses field's value.

func (*ListCreateAccountStatusOutput) SetNextToken ¶

func (s *ListCreateAccountStatusOutput) SetNextToken(v string) *ListCreateAccountStatusOutput

SetNextToken sets the NextToken field's value.

func (ListCreateAccountStatusOutput) String ¶

func (s ListCreateAccountStatusOutput) String() string

String returns the string representation

type ListHandshakesForAccountInput ¶

type ListHandshakesForAccountInput struct {

    // Filters the handshakes that you want included in the response. The default
    // is all types. Use the ActionType element to limit the output to only a specified
    // type, such as INVITE, ENABLE_ALL_FEATURES, or APPROVE_ALL_FEATURES. Alternatively,
    // for the ENABLE_ALL_FEATURES handshake that generates a separate child handshake
    // for each member account, you can specify ParentHandshakeId to see only the
    // handshakes that were generated by that parent request.
    Filter *HandshakeFilter `type:"structure"`

    // (Optional) Use this to limit the number of results you want included per
    // page in the response. If you do not include this parameter, it defaults to
    // a value that is specific to the operation. If additional items exist beyond
    // the maximum you specify, the NextToken response element is present and has
    // a value (is not null). Include that value as the NextToken request parameter
    // in the next call to the operation to get the next part of the results. Note
    // that Organizations might return fewer results than the maximum even when
    // there are more results available. You should check NextToken after every
    // operation to ensure that you receive all of the results.
    MaxResults *int64 `min:"1" type:"integer"`

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListHandshakesForAccountInput) GoString ¶

func (s ListHandshakesForAccountInput) GoString() string

GoString returns the string representation

func (*ListHandshakesForAccountInput) SetFilter ¶

func (s *ListHandshakesForAccountInput) SetFilter(v *HandshakeFilter) *ListHandshakesForAccountInput

SetFilter sets the Filter field's value.

func (*ListHandshakesForAccountInput) SetMaxResults ¶

func (s *ListHandshakesForAccountInput) SetMaxResults(v int64) *ListHandshakesForAccountInput

SetMaxResults sets the MaxResults field's value.

func (*ListHandshakesForAccountInput) SetNextToken ¶

func (s *ListHandshakesForAccountInput) SetNextToken(v string) *ListHandshakesForAccountInput

SetNextToken sets the NextToken field's value.

func (ListHandshakesForAccountInput) String ¶

func (s ListHandshakesForAccountInput) String() string

String returns the string representation

func (*ListHandshakesForAccountInput) Validate ¶

func (s *ListHandshakesForAccountInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListHandshakesForAccountOutput ¶

type ListHandshakesForAccountOutput struct {

    // A list of Handshake objects with details about each of the handshakes that
    // is associated with the specified account.
    Handshakes []*Handshake `type:"list"`

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListHandshakesForAccountOutput) GoString ¶

func (s ListHandshakesForAccountOutput) GoString() string

GoString returns the string representation

func (*ListHandshakesForAccountOutput) SetHandshakes ¶

func (s *ListHandshakesForAccountOutput) SetHandshakes(v []*Handshake) *ListHandshakesForAccountOutput

SetHandshakes sets the Handshakes field's value.

func (*ListHandshakesForAccountOutput) SetNextToken ¶

func (s *ListHandshakesForAccountOutput) SetNextToken(v string) *ListHandshakesForAccountOutput

SetNextToken sets the NextToken field's value.

func (ListHandshakesForAccountOutput) String ¶

func (s ListHandshakesForAccountOutput) String() string

String returns the string representation

type ListHandshakesForOrganizationInput ¶

type ListHandshakesForOrganizationInput struct {

    // A filter of the handshakes that you want included in the response. The default
    // is all types. Use the ActionType element to limit the output to only a specified
    // type, such as INVITE, ENABLE-ALL-FEATURES, or APPROVE-ALL-FEATURES. Alternatively,
    // for the ENABLE-ALL-FEATURES handshake that generates a separate child handshake
    // for each member account, you can specify the ParentHandshakeId to see only
    // the handshakes that were generated by that parent request.
    Filter *HandshakeFilter `type:"structure"`

    // (Optional) Use this to limit the number of results you want included per
    // page in the response. If you do not include this parameter, it defaults to
    // a value that is specific to the operation. If additional items exist beyond
    // the maximum you specify, the NextToken response element is present and has
    // a value (is not null). Include that value as the NextToken request parameter
    // in the next call to the operation to get the next part of the results. Note
    // that Organizations might return fewer results than the maximum even when
    // there are more results available. You should check NextToken after every
    // operation to ensure that you receive all of the results.
    MaxResults *int64 `min:"1" type:"integer"`

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListHandshakesForOrganizationInput) GoString ¶

func (s ListHandshakesForOrganizationInput) GoString() string

GoString returns the string representation

func (*ListHandshakesForOrganizationInput) SetFilter ¶

func (s *ListHandshakesForOrganizationInput) SetFilter(v *HandshakeFilter) *ListHandshakesForOrganizationInput

SetFilter sets the Filter field's value.

func (*ListHandshakesForOrganizationInput) SetMaxResults ¶

func (s *ListHandshakesForOrganizationInput) SetMaxResults(v int64) *ListHandshakesForOrganizationInput

SetMaxResults sets the MaxResults field's value.

func (*ListHandshakesForOrganizationInput) SetNextToken ¶

func (s *ListHandshakesForOrganizationInput) SetNextToken(v string) *ListHandshakesForOrganizationInput

SetNextToken sets the NextToken field's value.

func (ListHandshakesForOrganizationInput) String ¶

func (s ListHandshakesForOrganizationInput) String() string

String returns the string representation

func (*ListHandshakesForOrganizationInput) Validate ¶

func (s *ListHandshakesForOrganizationInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListHandshakesForOrganizationOutput ¶

type ListHandshakesForOrganizationOutput struct {

    // A list of Handshake objects with details about each of the handshakes that
    // are associated with an organization.
    Handshakes []*Handshake `type:"list"`

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListHandshakesForOrganizationOutput) GoString ¶

func (s ListHandshakesForOrganizationOutput) GoString() string

GoString returns the string representation

func (*ListHandshakesForOrganizationOutput) SetHandshakes ¶

func (s *ListHandshakesForOrganizationOutput) SetHandshakes(v []*Handshake) *ListHandshakesForOrganizationOutput

SetHandshakes sets the Handshakes field's value.

func (*ListHandshakesForOrganizationOutput) SetNextToken ¶

func (s *ListHandshakesForOrganizationOutput) SetNextToken(v string) *ListHandshakesForOrganizationOutput

SetNextToken sets the NextToken field's value.

func (ListHandshakesForOrganizationOutput) String ¶

func (s ListHandshakesForOrganizationOutput) String() string

String returns the string representation

type ListOrganizationalUnitsForParentInput ¶

type ListOrganizationalUnitsForParentInput struct {

    // (Optional) Use this to limit the number of results you want included per
    // page in the response. If you do not include this parameter, it defaults to
    // a value that is specific to the operation. If additional items exist beyond
    // the maximum you specify, the NextToken response element is present and has
    // a value (is not null). Include that value as the NextToken request parameter
    // in the next call to the operation to get the next part of the results. Note
    // that Organizations might return fewer results than the maximum even when
    // there are more results available. You should check NextToken after every
    // operation to ensure that you receive all of the results.
    MaxResults *int64 `min:"1" type:"integer"`

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`

    // The unique identifier (ID) of the root or OU whose child OUs you want to
    // list.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a parent ID string
    // requires one of the following:
    //
    //    * Root - A string that begins with "r-" followed by from 4 to 32 lower-case
    //    letters or digits.
    //
    //    * Organizational unit (OU) - A string that begins with "ou-" followed
    //    by from 4 to 32 lower-case letters or digits (the ID of the root that
    //    the OU is in) followed by a second "-" dash and from 8 to 32 additional
    //    lower-case letters or digits.
    //
    // ParentId is a required field
    ParentId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (ListOrganizationalUnitsForParentInput) GoString ¶

func (s ListOrganizationalUnitsForParentInput) GoString() string

GoString returns the string representation

func (*ListOrganizationalUnitsForParentInput) SetMaxResults ¶

func (s *ListOrganizationalUnitsForParentInput) SetMaxResults(v int64) *ListOrganizationalUnitsForParentInput

SetMaxResults sets the MaxResults field's value.

func (*ListOrganizationalUnitsForParentInput) SetNextToken ¶

func (s *ListOrganizationalUnitsForParentInput) SetNextToken(v string) *ListOrganizationalUnitsForParentInput

SetNextToken sets the NextToken field's value.

func (*ListOrganizationalUnitsForParentInput) SetParentId ¶

func (s *ListOrganizationalUnitsForParentInput) SetParentId(v string) *ListOrganizationalUnitsForParentInput

SetParentId sets the ParentId field's value.

func (ListOrganizationalUnitsForParentInput) String ¶

func (s ListOrganizationalUnitsForParentInput) String() string

String returns the string representation

func (*ListOrganizationalUnitsForParentInput) Validate ¶

func (s *ListOrganizationalUnitsForParentInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListOrganizationalUnitsForParentOutput ¶

type ListOrganizationalUnitsForParentOutput struct {

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`

    // A list of the OUs in the specified root or parent OU.
    OrganizationalUnits []*OrganizationalUnit `type:"list"`
    // contains filtered or unexported fields
}

func (ListOrganizationalUnitsForParentOutput) GoString ¶

func (s ListOrganizationalUnitsForParentOutput) GoString() string

GoString returns the string representation

func (*ListOrganizationalUnitsForParentOutput) SetNextToken ¶

func (s *ListOrganizationalUnitsForParentOutput) SetNextToken(v string) *ListOrganizationalUnitsForParentOutput

SetNextToken sets the NextToken field's value.

func (*ListOrganizationalUnitsForParentOutput) SetOrganizationalUnits ¶

func (s *ListOrganizationalUnitsForParentOutput) SetOrganizationalUnits(v []*OrganizationalUnit) *ListOrganizationalUnitsForParentOutput

SetOrganizationalUnits sets the OrganizationalUnits field's value.

func (ListOrganizationalUnitsForParentOutput) String ¶

func (s ListOrganizationalUnitsForParentOutput) String() string

String returns the string representation

type ListParentsInput ¶

type ListParentsInput struct {

    // The unique identifier (ID) of the OU or account whose parent containers you
    // want to list. Don't specify a root.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a child ID string
    // requires one of the following:
    //
    //    * Account - A string that consists of exactly 12 digits.
    //
    //    * Organizational unit (OU) - A string that begins with "ou-" followed
    //    by from 4 to 32 lower-case letters or digits (the ID of the root that
    //    contains the OU) followed by a second "-" dash and from 8 to 32 additional
    //    lower-case letters or digits.
    //
    // ChildId is a required field
    ChildId *string `type:"string" required:"true"`

    // (Optional) Use this to limit the number of results you want included per
    // page in the response. If you do not include this parameter, it defaults to
    // a value that is specific to the operation. If additional items exist beyond
    // the maximum you specify, the NextToken response element is present and has
    // a value (is not null). Include that value as the NextToken request parameter
    // in the next call to the operation to get the next part of the results. Note
    // that Organizations might return fewer results than the maximum even when
    // there are more results available. You should check NextToken after every
    // operation to ensure that you receive all of the results.
    MaxResults *int64 `min:"1" type:"integer"`

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListParentsInput) GoString ¶

func (s ListParentsInput) GoString() string

GoString returns the string representation

func (*ListParentsInput) SetChildId ¶

func (s *ListParentsInput) SetChildId(v string) *ListParentsInput

SetChildId sets the ChildId field's value.

func (*ListParentsInput) SetMaxResults ¶

func (s *ListParentsInput) SetMaxResults(v int64) *ListParentsInput

SetMaxResults sets the MaxResults field's value.

func (*ListParentsInput) SetNextToken ¶

func (s *ListParentsInput) SetNextToken(v string) *ListParentsInput

SetNextToken sets the NextToken field's value.

func (ListParentsInput) String ¶

func (s ListParentsInput) String() string

String returns the string representation

func (*ListParentsInput) Validate ¶

func (s *ListParentsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListParentsOutput ¶

type ListParentsOutput struct {

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`

    // A list of parents for the specified child account or OU.
    Parents []*Parent `type:"list"`
    // contains filtered or unexported fields
}

func (ListParentsOutput) GoString ¶

func (s ListParentsOutput) GoString() string

GoString returns the string representation

func (*ListParentsOutput) SetNextToken ¶

func (s *ListParentsOutput) SetNextToken(v string) *ListParentsOutput

SetNextToken sets the NextToken field's value.

func (*ListParentsOutput) SetParents ¶

func (s *ListParentsOutput) SetParents(v []*Parent) *ListParentsOutput

SetParents sets the Parents field's value.

func (ListParentsOutput) String ¶

func (s ListParentsOutput) String() string

String returns the string representation

type ListPoliciesForTargetInput ¶

type ListPoliciesForTargetInput struct {

    // The type of policy that you want to include in the returned list.
    //
    // Filter is a required field
    Filter *string `type:"string" required:"true" enum:"PolicyType"`

    // (Optional) Use this to limit the number of results you want included per
    // page in the response. If you do not include this parameter, it defaults to
    // a value that is specific to the operation. If additional items exist beyond
    // the maximum you specify, the NextToken response element is present and has
    // a value (is not null). Include that value as the NextToken request parameter
    // in the next call to the operation to get the next part of the results. Note
    // that Organizations might return fewer results than the maximum even when
    // there are more results available. You should check NextToken after every
    // operation to ensure that you receive all of the results.
    MaxResults *int64 `min:"1" type:"integer"`

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`

    // The unique identifier (ID) of the root, organizational unit, or account whose
    // policies you want to list.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a target ID string
    // requires one of the following:
    //
    //    * Root - A string that begins with "r-" followed by from 4 to 32 lower-case
    //    letters or digits.
    //
    //    * Account - A string that consists of exactly 12 digits.
    //
    //    * Organizational unit (OU) - A string that begins with "ou-" followed
    //    by from 4 to 32 lower-case letters or digits (the ID of the root that
    //    the OU is in) followed by a second "-" dash and from 8 to 32 additional
    //    lower-case letters or digits.
    //
    // TargetId is a required field
    TargetId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (ListPoliciesForTargetInput) GoString ¶

func (s ListPoliciesForTargetInput) GoString() string

GoString returns the string representation

func (*ListPoliciesForTargetInput) SetFilter ¶

func (s *ListPoliciesForTargetInput) SetFilter(v string) *ListPoliciesForTargetInput

SetFilter sets the Filter field's value.

func (*ListPoliciesForTargetInput) SetMaxResults ¶

func (s *ListPoliciesForTargetInput) SetMaxResults(v int64) *ListPoliciesForTargetInput

SetMaxResults sets the MaxResults field's value.

func (*ListPoliciesForTargetInput) SetNextToken ¶

func (s *ListPoliciesForTargetInput) SetNextToken(v string) *ListPoliciesForTargetInput

SetNextToken sets the NextToken field's value.

func (*ListPoliciesForTargetInput) SetTargetId ¶

func (s *ListPoliciesForTargetInput) SetTargetId(v string) *ListPoliciesForTargetInput

SetTargetId sets the TargetId field's value.

func (ListPoliciesForTargetInput) String ¶

func (s ListPoliciesForTargetInput) String() string

String returns the string representation

func (*ListPoliciesForTargetInput) Validate ¶

func (s *ListPoliciesForTargetInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListPoliciesForTargetOutput ¶

type ListPoliciesForTargetOutput struct {

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`

    // The list of policies that match the criteria in the request.
    Policies []*PolicySummary `type:"list"`
    // contains filtered or unexported fields
}

func (ListPoliciesForTargetOutput) GoString ¶

func (s ListPoliciesForTargetOutput) GoString() string

GoString returns the string representation

func (*ListPoliciesForTargetOutput) SetNextToken ¶

func (s *ListPoliciesForTargetOutput) SetNextToken(v string) *ListPoliciesForTargetOutput

SetNextToken sets the NextToken field's value.

func (*ListPoliciesForTargetOutput) SetPolicies ¶

func (s *ListPoliciesForTargetOutput) SetPolicies(v []*PolicySummary) *ListPoliciesForTargetOutput

SetPolicies sets the Policies field's value.

func (ListPoliciesForTargetOutput) String ¶

func (s ListPoliciesForTargetOutput) String() string

String returns the string representation

type ListPoliciesInput ¶

type ListPoliciesInput struct {

    // Specifies the type of policy that you want to include in the response.
    //
    // Filter is a required field
    Filter *string `type:"string" required:"true" enum:"PolicyType"`

    // (Optional) Use this to limit the number of results you want included per
    // page in the response. If you do not include this parameter, it defaults to
    // a value that is specific to the operation. If additional items exist beyond
    // the maximum you specify, the NextToken response element is present and has
    // a value (is not null). Include that value as the NextToken request parameter
    // in the next call to the operation to get the next part of the results. Note
    // that Organizations might return fewer results than the maximum even when
    // there are more results available. You should check NextToken after every
    // operation to ensure that you receive all of the results.
    MaxResults *int64 `min:"1" type:"integer"`

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListPoliciesInput) GoString ¶

func (s ListPoliciesInput) GoString() string

GoString returns the string representation

func (*ListPoliciesInput) SetFilter ¶

func (s *ListPoliciesInput) SetFilter(v string) *ListPoliciesInput

SetFilter sets the Filter field's value.

func (*ListPoliciesInput) SetMaxResults ¶

func (s *ListPoliciesInput) SetMaxResults(v int64) *ListPoliciesInput

SetMaxResults sets the MaxResults field's value.

func (*ListPoliciesInput) SetNextToken ¶

func (s *ListPoliciesInput) SetNextToken(v string) *ListPoliciesInput

SetNextToken sets the NextToken field's value.

func (ListPoliciesInput) String ¶

func (s ListPoliciesInput) String() string

String returns the string representation

func (*ListPoliciesInput) Validate ¶

func (s *ListPoliciesInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListPoliciesOutput ¶

type ListPoliciesOutput struct {

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`

    // A list of policies that match the filter criteria in the request. The output
    // list doesn't include the policy contents. To see the content for a policy,
    // see DescribePolicy.
    Policies []*PolicySummary `type:"list"`
    // contains filtered or unexported fields
}

func (ListPoliciesOutput) GoString ¶

func (s ListPoliciesOutput) GoString() string

GoString returns the string representation

func (*ListPoliciesOutput) SetNextToken ¶

func (s *ListPoliciesOutput) SetNextToken(v string) *ListPoliciesOutput

SetNextToken sets the NextToken field's value.

func (*ListPoliciesOutput) SetPolicies ¶

func (s *ListPoliciesOutput) SetPolicies(v []*PolicySummary) *ListPoliciesOutput

SetPolicies sets the Policies field's value.

func (ListPoliciesOutput) String ¶

func (s ListPoliciesOutput) String() string

String returns the string representation

type ListRootsInput ¶

type ListRootsInput struct {

    // (Optional) Use this to limit the number of results you want included per
    // page in the response. If you do not include this parameter, it defaults to
    // a value that is specific to the operation. If additional items exist beyond
    // the maximum you specify, the NextToken response element is present and has
    // a value (is not null). Include that value as the NextToken request parameter
    // in the next call to the operation to get the next part of the results. Note
    // that Organizations might return fewer results than the maximum even when
    // there are more results available. You should check NextToken after every
    // operation to ensure that you receive all of the results.
    MaxResults *int64 `min:"1" type:"integer"`

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`
    // contains filtered or unexported fields
}

func (ListRootsInput) GoString ¶

func (s ListRootsInput) GoString() string

GoString returns the string representation

func (*ListRootsInput) SetMaxResults ¶

func (s *ListRootsInput) SetMaxResults(v int64) *ListRootsInput

SetMaxResults sets the MaxResults field's value.

func (*ListRootsInput) SetNextToken ¶

func (s *ListRootsInput) SetNextToken(v string) *ListRootsInput

SetNextToken sets the NextToken field's value.

func (ListRootsInput) String ¶

func (s ListRootsInput) String() string

String returns the string representation

func (*ListRootsInput) Validate ¶

func (s *ListRootsInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListRootsOutput ¶

type ListRootsOutput struct {

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`

    // A list of roots that are defined in an organization.
    Roots []*Root `type:"list"`
    // contains filtered or unexported fields
}

func (ListRootsOutput) GoString ¶

func (s ListRootsOutput) GoString() string

GoString returns the string representation

func (*ListRootsOutput) SetNextToken ¶

func (s *ListRootsOutput) SetNextToken(v string) *ListRootsOutput

SetNextToken sets the NextToken field's value.

func (*ListRootsOutput) SetRoots ¶

func (s *ListRootsOutput) SetRoots(v []*Root) *ListRootsOutput

SetRoots sets the Roots field's value.

func (ListRootsOutput) String ¶

func (s ListRootsOutput) String() string

String returns the string representation

type ListTagsForResourceInput ¶

type ListTagsForResourceInput struct {

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`

    // The ID of the resource that you want to retrieve tags for.
    //
    // ResourceId is a required field
    ResourceId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (ListTagsForResourceInput) GoString ¶

func (s ListTagsForResourceInput) GoString() string

GoString returns the string representation

func (*ListTagsForResourceInput) SetNextToken ¶

func (s *ListTagsForResourceInput) SetNextToken(v string) *ListTagsForResourceInput

SetNextToken sets the NextToken field's value.

func (*ListTagsForResourceInput) SetResourceId ¶

func (s *ListTagsForResourceInput) SetResourceId(v string) *ListTagsForResourceInput

SetResourceId sets the ResourceId field's value.

func (ListTagsForResourceInput) String ¶

func (s ListTagsForResourceInput) String() string

String returns the string representation

func (*ListTagsForResourceInput) Validate ¶

func (s *ListTagsForResourceInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTagsForResourceOutput ¶

type ListTagsForResourceOutput struct {

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`

    // The tags that are assigned to the resource.
    Tags []*Tag `type:"list"`
    // contains filtered or unexported fields
}

func (ListTagsForResourceOutput) GoString ¶

func (s ListTagsForResourceOutput) GoString() string

GoString returns the string representation

func (*ListTagsForResourceOutput) SetNextToken ¶

func (s *ListTagsForResourceOutput) SetNextToken(v string) *ListTagsForResourceOutput

SetNextToken sets the NextToken field's value.

func (*ListTagsForResourceOutput) SetTags ¶

func (s *ListTagsForResourceOutput) SetTags(v []*Tag) *ListTagsForResourceOutput

SetTags sets the Tags field's value.

func (ListTagsForResourceOutput) String ¶

func (s ListTagsForResourceOutput) String() string

String returns the string representation

type ListTargetsForPolicyInput ¶

type ListTargetsForPolicyInput struct {

    // (Optional) Use this to limit the number of results you want included per
    // page in the response. If you do not include this parameter, it defaults to
    // a value that is specific to the operation. If additional items exist beyond
    // the maximum you specify, the NextToken response element is present and has
    // a value (is not null). Include that value as the NextToken request parameter
    // in the next call to the operation to get the next part of the results. Note
    // that Organizations might return fewer results than the maximum even when
    // there are more results available. You should check NextToken after every
    // operation to ensure that you receive all of the results.
    MaxResults *int64 `min:"1" type:"integer"`

    // Use this parameter if you receive a NextToken response in a previous request
    // that indicates that there is more output available. Set it to the value of
    // the previous call's NextToken response to indicate where the output should
    // continue from.
    NextToken *string `type:"string"`

    // The unique identifier (ID) of the policy whose attachments you want to know.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a policy ID string
    // requires "p-" followed by from 8 to 128 lower-case letters or digits.
    //
    // PolicyId is a required field
    PolicyId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (ListTargetsForPolicyInput) GoString ¶

func (s ListTargetsForPolicyInput) GoString() string

GoString returns the string representation

func (*ListTargetsForPolicyInput) SetMaxResults ¶

func (s *ListTargetsForPolicyInput) SetMaxResults(v int64) *ListTargetsForPolicyInput

SetMaxResults sets the MaxResults field's value.

func (*ListTargetsForPolicyInput) SetNextToken ¶

func (s *ListTargetsForPolicyInput) SetNextToken(v string) *ListTargetsForPolicyInput

SetNextToken sets the NextToken field's value.

func (*ListTargetsForPolicyInput) SetPolicyId ¶

func (s *ListTargetsForPolicyInput) SetPolicyId(v string) *ListTargetsForPolicyInput

SetPolicyId sets the PolicyId field's value.

func (ListTargetsForPolicyInput) String ¶

func (s ListTargetsForPolicyInput) String() string

String returns the string representation

func (*ListTargetsForPolicyInput) Validate ¶

func (s *ListTargetsForPolicyInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type ListTargetsForPolicyOutput ¶

type ListTargetsForPolicyOutput struct {

    // If present, this value indicates that there is more output available than
    // is included in the current response. Use this value in the NextToken request
    // parameter in a subsequent call to the operation to get the next part of the
    // output. You should repeat this until the NextToken response element comes
    // back as null.
    NextToken *string `type:"string"`

    // A list of structures, each of which contains details about one of the entities
    // to which the specified policy is attached.
    Targets []*PolicyTargetSummary `type:"list"`
    // contains filtered or unexported fields
}

func (ListTargetsForPolicyOutput) GoString ¶

func (s ListTargetsForPolicyOutput) GoString() string

GoString returns the string representation

func (*ListTargetsForPolicyOutput) SetNextToken ¶

func (s *ListTargetsForPolicyOutput) SetNextToken(v string) *ListTargetsForPolicyOutput

SetNextToken sets the NextToken field's value.

func (*ListTargetsForPolicyOutput) SetTargets ¶

func (s *ListTargetsForPolicyOutput) SetTargets(v []*PolicyTargetSummary) *ListTargetsForPolicyOutput

SetTargets sets the Targets field's value.

func (ListTargetsForPolicyOutput) String ¶

func (s ListTargetsForPolicyOutput) String() string

String returns the string representation

type MoveAccountInput ¶

type MoveAccountInput struct {

    // The unique identifier (ID) of the account that you want to move.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for an account ID string
    // requires exactly 12 digits.
    //
    // AccountId is a required field
    AccountId *string `type:"string" required:"true"`

    // The unique identifier (ID) of the root or organizational unit that you want
    // to move the account to.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a parent ID string
    // requires one of the following:
    //
    //    * Root - A string that begins with "r-" followed by from 4 to 32 lower-case
    //    letters or digits.
    //
    //    * Organizational unit (OU) - A string that begins with "ou-" followed
    //    by from 4 to 32 lower-case letters or digits (the ID of the root that
    //    the OU is in) followed by a second "-" dash and from 8 to 32 additional
    //    lower-case letters or digits.
    //
    // DestinationParentId is a required field
    DestinationParentId *string `type:"string" required:"true"`

    // The unique identifier (ID) of the root or organizational unit that you want
    // to move the account from.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for a parent ID string
    // requires one of the following:
    //
    //    * Root - A string that begins with "r-" followed by from 4 to 32 lower-case
    //    letters or digits.
    //
    //    * Organizational unit (OU) - A string that begins with "ou-" followed
    //    by from 4 to 32 lower-case letters or digits (the ID of the root that
    //    the OU is in) followed by a second "-" dash and from 8 to 32 additional
    //    lower-case letters or digits.
    //
    // SourceParentId is a required field
    SourceParentId *string `type:"string" required:"true"`
    // contains filtered or unexported fields
}

func (MoveAccountInput) GoString ¶

func (s MoveAccountInput) GoString() string

GoString returns the string representation

func (*MoveAccountInput) SetAccountId ¶

func (s *MoveAccountInput) SetAccountId(v string) *MoveAccountInput

SetAccountId sets the AccountId field's value.

func (*MoveAccountInput) SetDestinationParentId ¶

func (s *MoveAccountInput) SetDestinationParentId(v string) *MoveAccountInput

SetDestinationParentId sets the DestinationParentId field's value.

func (*MoveAccountInput) SetSourceParentId ¶

func (s *MoveAccountInput) SetSourceParentId(v string) *MoveAccountInput

SetSourceParentId sets the SourceParentId field's value.

func (MoveAccountInput) String ¶

func (s MoveAccountInput) String() string

String returns the string representation

func (*MoveAccountInput) Validate ¶

func (s *MoveAccountInput) Validate() error

Validate inspects the fields of the type to determine if they are valid.

type MoveAccountOutput ¶

type MoveAccountOutput struct {
    // contains filtered or unexported fields
}

func (MoveAccountOutput) GoString ¶

func (s MoveAccountOutput) GoString() string

GoString returns the string representation

func (MoveAccountOutput) String ¶

func (s MoveAccountOutput) String() string

String returns the string representation

type Organization ¶

type Organization struct {

    // The Amazon Resource Name (ARN) of an organization.
    //
    // For more information about ARNs in Organizations, see ARN Formats Supported
    // by Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_permissions.html#orgs-permissions-arns)
    // in the AWS Organizations User Guide.
    Arn *string `type:"string"`

    // A list of policy types that are enabled for this organization. For example,
    // if your organization has all features enabled, then service control policies
    // (SCPs) are included in the list.
    //
    // Even if a policy type is shown as available in the organization, you can
    // separately enable and disable them at the root level by using EnablePolicyType
    // and DisablePolicyType. Use ListRoots to see the status of a policy type in
    // that root.
    AvailablePolicyTypes []*PolicyTypeSummary `type:"list"`

    // Specifies the functionality that currently is available to the organization.
    // If set to "ALL", then all features are enabled and policies can be applied
    // to accounts in the organization. If set to "CONSOLIDATED_BILLING", then only
    // consolidated billing functionality is available. For more information, see
    // Enabling All Features in Your Organization (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html)
    // in the AWS Organizations User Guide.
    FeatureSet *string `type:"string" enum:"OrganizationFeatureSet"`

    // The unique identifier (ID) of an organization.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for an organization ID
    // string requires "o-" followed by from 10 to 32 lower-case letters or digits.
    Id *string `type:"string"`

    // The Amazon Resource Name (ARN) of the account that is designated as the master
    // account for the organization.
    //
    // For more information about ARNs in Organizations, see ARN Formats Supported
    // by Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_permissions.html#orgs-permissions-arns)
    // in the AWS Organizations User Guide.
    MasterAccountArn *string `type:"string"`

    // The email address that is associated with the AWS account that is designated
    // as the master account for the organization.
    MasterAccountEmail *string `min:"6" type:"string" sensitive:"true"`

    // The unique identifier (ID) of the master account of an organization.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for an account ID string
    // requires exactly 12 digits.
    MasterAccountId *string `type:"string"`
    // contains filtered or unexported fields
}

Contains details about an organization. An organization is a collection of accounts that are centrally managed together using consolidated billing, organized hierarchically with organizational units (OUs), and controlled with policies .

func (Organization) GoString ¶

func (s Organization) GoString() string

GoString returns the string representation

func (*Organization) SetArn ¶

func (s *Organization) SetArn(v string) *Organization

SetArn sets the Arn field's value.

func (*Organization) SetAvailablePolicyTypes ¶

func (s *Organization) SetAvailablePolicyTypes(v []*PolicyTypeSummary) *Organization

SetAvailablePolicyTypes sets the AvailablePolicyTypes field's value.

func (*Organization) SetFeatureSet ¶

func (s *Organization) SetFeatureSet(v string) *Organization

SetFeatureSet sets the FeatureSet field's value.

func (*Organization) SetId ¶

func (s *Organization) SetId(v string) *Organization

SetId sets the Id field's value.

func (*Organization) SetMasterAccountArn ¶

func (s *Organization) SetMasterAccountArn(v string) *Organization

SetMasterAccountArn sets the MasterAccountArn field's value.

func (*Organization) SetMasterAccountEmail ¶

func (s *Organization) SetMasterAccountEmail(v string) *Organization

SetMasterAccountEmail sets the MasterAccountEmail field's value.

func (*Organization) SetMasterAccountId ¶

func (s *Organization) SetMasterAccountId(v string) *Organization

SetMasterAccountId sets the MasterAccountId field's value.

func (Organization) String ¶

func (s Organization) String() string

String returns the string representation

type OrganizationalUnit ¶

type OrganizationalUnit struct {

    // The Amazon Resource Name (ARN) of this OU.
    //
    // For more information about ARNs in Organizations, see ARN Formats Supported
    // by Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_permissions.html#orgs-permissions-arns)
    // in the AWS Organizations User Guide.
    Arn *string `type:"string"`

    // The unique identifier (ID) associated with this OU.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) for an organizational
    // unit ID string requires "ou-" followed by from 4 to 32 lower-case letters
    // or digits (the ID of the root that contains the OU) followed by a second
    // "-" dash and from 8 to 32 additional lower-case letters or digits.
    Id *string `type:"string"`

    // The friendly name of this OU.
    //
    // The regex pattern (http://wikipedia.org/wiki/regex) that is used to validate
    // this parameter is a string of any of the characters in the ASCII character
    // range.
    Name *string `min:"1" type:"string"`
    // contains filtered or unexported fields
}

Contains details about an organizational unit (OU). An OU is a container of AWS accounts within a root of an organization. Policies that are attached to an OU apply to all accounts contained in that OU and in any child OUs.

func (OrganizationalUnit) GoString ¶

func (s OrganizationalUnit) GoString() string

GoString returns the string representation

func (*OrganizationalUnit) SetArn ¶

func (s *OrganizationalUnit) SetArn(v string) *OrganizationalUnit

SetArn sets the Arn field's value.

func (*OrganizationalUnit) SetId ¶

func (s *OrganizationalUnit) SetId(v string) *OrganizationalUnit

SetId sets the Id field's value.

func (*OrganizationalUnit) SetName ¶

func (s *OrganizationalUnit) SetName(v string) *OrganizationalUnit

SetName sets the Name field's value.

func (OrganizationalUnit) String ¶

func (s OrganizationalUnit) String() string

String returns the string representation

type Organizations ¶

type Organizations struct {
    *client.Client
}

Organizations provides the API operation methods for making requests to AWS Organizations. See this package's package overview docs for details on the service.

Organizations methods are safe to use concurrently. It is not safe to modify mutate any of the struct's properties though.

func New ¶

func New(p client.ConfigProvider, cfgs ...*aws.Config) *Organizations

New creates a new instance of the Organizations client with a session. If additional configuration is needed for the client instance use the optional aws.Config parameter to add your extra config.

Example:

// Create a Organizations client from just a session.
svc := organizations.New(mySession)

// Create a Organizations client with additional configuration
svc := organizations.New(mySession, aws.NewConfig().WithRegion("us-west-2"))

func (*Organizations) AcceptHandshake ¶

func (c *Organizations) AcceptHandshake(input *AcceptHandshakeInput) (*AcceptHandshakeOutput, error)

AcceptHandshake API operation for AWS Organizations.

Sends a response to the originator of a handshake agreeing to the action proposed by the handshake request.

This operation can be called only by the following principals when they also have the relevant IAM permissions:

* Invitation to join or Approve all features request handshakes: only
a principal from the member account. The user who calls the API for an
invitation to join must have the organizations:AcceptHandshake permission.
If you enabled all features in the organization, the user must also have
the iam:CreateServiceLinkedRole permission so that AWS Organizations can
create the required service-linked role named AWSServiceRoleForOrganizations.
For more information, see AWS Organizations and Service-Linked Roles (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_integration_services.html#orgs_integration_service-linked-roles)
in the AWS Organizations User Guide.

* Enable all features final confirmation handshake: only a principal from
the master account. For more information about invitations, see Inviting
an AWS Account to Join Your Organization (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_invites.html)
in the AWS Organizations User Guide. For more information about requests
to enable all features in the organization, see Enabling All Features
in Your Organization (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html)
in the AWS Organizations User Guide.

After you accept a handshake, it continues to appear in the results of relevant APIs for only 30 days. After that, it's deleted.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation AcceptHandshake for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeHandshakeConstraintViolationException "HandshakeConstraintViolationException"
The requested operation would violate the constraint identified in the reason
code.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. Note that deleted and closed
   accounts still count toward your limit. If you get this exception immediately
   after creating the organization, wait one hour and try again. If after
   an hour it continues to fail with this error, contact AWS Support (https://console.aws.amazon.com/support/home#/).

   * ALREADY_IN_AN_ORGANIZATION: The handshake request is invalid because
   the invited account is already a member of an organization.

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * INVITE_DISABLED_DURING_ENABLE_ALL_FEATURES: You can't issue new invitations
   to join an organization while it's in the process of enabling all features.
   You can resume inviting accounts after you finalize the process when all
   accounts have agreed to the change.

   * ORGANIZATION_ALREADY_HAS_ALL_FEATURES: The handshake request is invalid
   because the organization has already enabled all features.

   * ORGANIZATION_FROM_DIFFERENT_SELLER_OF_RECORD: The request failed because
   the account is from a different marketplace than the accounts in the organization.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be from the same
   marketplace.

   * ORGANIZATION_MEMBERSHIP_CHANGE_RATE_LIMIT_EXCEEDED: You attempted to
   change the membership of an account too quickly after its previous change.

   * PAYMENT_INSTRUMENT_REQUIRED: You can't complete the operation with an
   account that doesn't have a payment instrument, such as a credit card,
   associated with it.

* ErrCodeHandshakeNotFoundException "HandshakeNotFoundException"
We can't find a handshake with the HandshakeId that you specified.

* ErrCodeInvalidHandshakeTransitionException "InvalidHandshakeTransitionException"
You can't perform the operation on the handshake in its current state. For
example, you can't cancel a handshake that was already accepted or accept
a handshake that was already declined.

* ErrCodeHandshakeAlreadyInStateException "HandshakeAlreadyInStateException"
The specified handshake is already in the requested state. For example, you
can't accept a handshake that was already accepted.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

* ErrCodeAccessDeniedForDependencyException "AccessDeniedForDependencyException"
The operation that you attempted requires you to have the iam:CreateServiceLinkedRole
for organizations.amazonaws.com permission so that AWS Organizations can
create the required service-linked role. You don't have that permission.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/AcceptHandshake

svc := organizations.New(session.New())
input := &organizations.AcceptHandshakeInput{
    HandshakeId: aws.String("h-examplehandshakeid111"),
}

result, err := svc.AcceptHandshake(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeHandshakeConstraintViolationException:
            fmt.Println(organizations.ErrCodeHandshakeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeHandshakeNotFoundException:
            fmt.Println(organizations.ErrCodeHandshakeNotFoundException, aerr.Error())
        case organizations.ErrCodeInvalidHandshakeTransitionException:
            fmt.Println(organizations.ErrCodeInvalidHandshakeTransitionException, aerr.Error())
        case organizations.ErrCodeHandshakeAlreadyInStateException:
            fmt.Println(organizations.ErrCodeHandshakeAlreadyInStateException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        case organizations.ErrCodeAccessDeniedForDependencyException:
            fmt.Println(organizations.ErrCodeAccessDeniedForDependencyException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) AcceptHandshakeRequest ¶

func (c *Organizations) AcceptHandshakeRequest(input *AcceptHandshakeInput) (req *request.Request, output *AcceptHandshakeOutput)

AcceptHandshakeRequest generates a "aws/request.Request" representing the client's request for the AcceptHandshake operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See AcceptHandshake for more information on using the AcceptHandshake API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the AcceptHandshakeRequest method.
req, resp := client.AcceptHandshakeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/AcceptHandshake

func (*Organizations) AcceptHandshakeWithContext ¶

func (c *Organizations) AcceptHandshakeWithContext(ctx aws.Context, input *AcceptHandshakeInput, opts ...request.Option) (*AcceptHandshakeOutput, error)

AcceptHandshakeWithContext is the same as AcceptHandshake with the addition of the ability to pass a context and additional request options.

See AcceptHandshake for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) AttachPolicy ¶

func (c *Organizations) AttachPolicy(input *AttachPolicyInput) (*AttachPolicyOutput, error)

AttachPolicy API operation for AWS Organizations.

Attaches a policy to a root, an organizational unit (OU), or an individual account. How the policy affects accounts depends on the type of policy:

* Service control policy (SCP) - An SCP specifies what permissions can
be delegated to users in affected member accounts. The scope of influence
for a policy depends on what you attach the policy to: If you attach an
SCP to a root, it affects all accounts in the organization. If you attach
an SCP to an OU, it affects all accounts in that OU and in any child OUs.
If you attach the policy directly to an account, it affects only that
account. SCPs are JSON policies that specify the maximum permissions for
an organization or organizational unit (OU). You can attach one SCP to
a higher level root or OU, and a different SCP to a child OU or to an
account. The child policy can further restrict only the permissions that
pass through the parent filter and are available to the child. An SCP
that is attached to a child can't grant a permission that the parent hasn't
already granted. For example, imagine that the parent SCP allows permissions
A, B, C, D, and E. The child SCP allows C, D, E, F, and G. The result
is that the accounts affected by the child SCP are allowed to use only
C, D, and E. They can't use A or B because the child OU filtered them
out. They also can't use F and G because the parent OU filtered them out.
They can't be granted back by the child SCP; child SCPs can only filter
the permissions they receive from the parent SCP. AWS Organizations attaches
a default SCP named "FullAWSAccess to every root, OU, and account. This
default SCP allows all services and actions, enabling any new child OU
or account to inherit the permissions of the parent root or OU. If you
detach the default policy, you must replace it with a policy that specifies
the permissions that you want to allow in that OU or account. For more
information about how AWS Organizations policies permissions work, see
Using Service Control Policies (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_policies_scp.html)
in the AWS Organizations User Guide.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation AttachPolicy for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeConstraintViolationException "ConstraintViolationException"
Performing this operation violates a minimum or maximum value limit. For
example, attempting to remove the last service control policy (SCP) from
an OU or root, inviting or creating too many accounts to the organization,
or attaching too many policies to an account, OU, or root. This exception
includes a reason that contains additional information about the violated
limit.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
   from the organization that doesn't yet have enough information to exist
   as a standalone account. This account requires you to first agree to the
   AWS Customer Agreement. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
   an account from the organization that doesn't yet have enough information
   to exist as a standalone account. This account requires you to first complete
   phone verification. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
   of accounts that you can create in one day.

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. If you need more accounts,
   contact AWS Support (https://console.aws.amazon.com/support/home#/) to
   request an increase in your limit. Or the number of invitations that you
   tried to send would cause you to exceed the limit of accounts in your
   organization. Send fewer invitations or contact AWS Support to request
   an increase in the number of accounts. Deleted and closed accounts still
   count toward your limit. If you get receive this exception when running
   a command immediately after creating the organization, wait one hour and
   try again. If after an hour it continues to fail with this error, contact
   AWS Support (https://console.aws.amazon.com/support/home#/).

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
   in this organization, you first must migrate the organization's master
   account to the marketplace that corresponds to the master account's address.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be associated
   with the same marketplace.

   * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
   must first provide contact a valid address and phone number for the master
   account. Then try the operation again.

   * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
   master account must have an associated account in the AWS GovCloud (US-West)
   Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
   in the AWS GovCloud User Guide.

   * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
   with this master account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
   number of policies of a certain type that can be attached to an entity
   at one time.

   * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
   on this resource.

   * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
   with this member account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
   policy from an entity that would cause the entity to have fewer than the
   minimum number of policies of a certain type required.

   * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
   too many levels deep.

   * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
   that requires the organization to be configured to support all features.
   An organization that supports only consolidated billing features can't
   perform this operation.

   * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
   that you can have in an organization.

   * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
   policies that you can have in an organization.

* ErrCodeDuplicatePolicyAttachmentException "DuplicatePolicyAttachmentException"
The selected policy is already attached to the specified target.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodePolicyNotFoundException "PolicyNotFoundException"
We can't find a policy with the PolicyId that you specified.

* ErrCodePolicyTypeNotEnabledException "PolicyTypeNotEnabledException"
The specified policy type isn't currently enabled in this root. You can't
attach policies of the specified type to entities in a root until you enable
that type in the root. For more information, see Enabling All Features in
Your Organization (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html)
in the AWS Organizations User Guide.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTargetNotFoundException "TargetNotFoundException"
We can't find a root, OU, or account with the TargetId that you specified.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/AttachPolicy

svc := organizations.New(session.New())
input := &organizations.AttachPolicyInput{
    PolicyId: aws.String("p-examplepolicyid111"),
    TargetId: aws.String("ou-examplerootid111-exampleouid111"),
}

result, err := svc.AttachPolicy(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeConstraintViolationException:
            fmt.Println(organizations.ErrCodeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeDuplicatePolicyAttachmentException:
            fmt.Println(organizations.ErrCodeDuplicatePolicyAttachmentException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodePolicyNotFoundException:
            fmt.Println(organizations.ErrCodePolicyNotFoundException, aerr.Error())
        case organizations.ErrCodePolicyTypeNotEnabledException:
            fmt.Println(organizations.ErrCodePolicyTypeNotEnabledException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTargetNotFoundException:
            fmt.Println(organizations.ErrCodeTargetNotFoundException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

svc := organizations.New(session.New())
input := &organizations.AttachPolicyInput{
    PolicyId: aws.String("p-examplepolicyid111"),
    TargetId: aws.String("333333333333"),
}

result, err := svc.AttachPolicy(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeConstraintViolationException:
            fmt.Println(organizations.ErrCodeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeDuplicatePolicyAttachmentException:
            fmt.Println(organizations.ErrCodeDuplicatePolicyAttachmentException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodePolicyNotFoundException:
            fmt.Println(organizations.ErrCodePolicyNotFoundException, aerr.Error())
        case organizations.ErrCodePolicyTypeNotEnabledException:
            fmt.Println(organizations.ErrCodePolicyTypeNotEnabledException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTargetNotFoundException:
            fmt.Println(organizations.ErrCodeTargetNotFoundException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) AttachPolicyRequest ¶

func (c *Organizations) AttachPolicyRequest(input *AttachPolicyInput) (req *request.Request, output *AttachPolicyOutput)

AttachPolicyRequest generates a "aws/request.Request" representing the client's request for the AttachPolicy operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See AttachPolicy for more information on using the AttachPolicy API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the AttachPolicyRequest method.
req, resp := client.AttachPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/AttachPolicy

func (*Organizations) AttachPolicyWithContext ¶

func (c *Organizations) AttachPolicyWithContext(ctx aws.Context, input *AttachPolicyInput, opts ...request.Option) (*AttachPolicyOutput, error)

AttachPolicyWithContext is the same as AttachPolicy with the addition of the ability to pass a context and additional request options.

See AttachPolicy for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) CancelHandshake ¶

func (c *Organizations) CancelHandshake(input *CancelHandshakeInput) (*CancelHandshakeOutput, error)

CancelHandshake API operation for AWS Organizations.

Cancels a handshake. Canceling a handshake sets the handshake state to CANCELED.

This operation can be called only from the account that originated the handshake. The recipient of the handshake can't cancel it, but can use DeclineHandshake instead. After a handshake is canceled, the recipient can no longer respond to that handshake.

After you cancel a handshake, it continues to appear in the results of relevant APIs for only 30 days. After that, it's deleted.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation CancelHandshake for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeHandshakeNotFoundException "HandshakeNotFoundException"
We can't find a handshake with the HandshakeId that you specified.

* ErrCodeInvalidHandshakeTransitionException "InvalidHandshakeTransitionException"
You can't perform the operation on the handshake in its current state. For
example, you can't cancel a handshake that was already accepted or accept
a handshake that was already declined.

* ErrCodeHandshakeAlreadyInStateException "HandshakeAlreadyInStateException"
The specified handshake is already in the requested state. For example, you
can't accept a handshake that was already accepted.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/CancelHandshake

svc := organizations.New(session.New())
input := &organizations.CancelHandshakeInput{
    HandshakeId: aws.String("h-examplehandshakeid111"),
}

result, err := svc.CancelHandshake(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeHandshakeNotFoundException:
            fmt.Println(organizations.ErrCodeHandshakeNotFoundException, aerr.Error())
        case organizations.ErrCodeInvalidHandshakeTransitionException:
            fmt.Println(organizations.ErrCodeInvalidHandshakeTransitionException, aerr.Error())
        case organizations.ErrCodeHandshakeAlreadyInStateException:
            fmt.Println(organizations.ErrCodeHandshakeAlreadyInStateException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) CancelHandshakeRequest ¶

func (c *Organizations) CancelHandshakeRequest(input *CancelHandshakeInput) (req *request.Request, output *CancelHandshakeOutput)

CancelHandshakeRequest generates a "aws/request.Request" representing the client's request for the CancelHandshake operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CancelHandshake for more information on using the CancelHandshake API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CancelHandshakeRequest method.
req, resp := client.CancelHandshakeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/CancelHandshake

func (*Organizations) CancelHandshakeWithContext ¶

func (c *Organizations) CancelHandshakeWithContext(ctx aws.Context, input *CancelHandshakeInput, opts ...request.Option) (*CancelHandshakeOutput, error)

CancelHandshakeWithContext is the same as CancelHandshake with the addition of the ability to pass a context and additional request options.

See CancelHandshake for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) CreateAccount ¶

func (c *Organizations) CreateAccount(input *CreateAccountInput) (*CreateAccountOutput, error)

CreateAccount API operation for AWS Organizations.

Creates an AWS account that is automatically a member of the organization whose credentials made the request. This is an asynchronous request that AWS performs in the background. Because CreateAccount operates asynchronously, it can return a successful completion message even though account initialization might still be in progress. You might need to wait a few minutes before you can successfully access the account. To check the status of the request, do one of the following:

* Use the OperationId response element from this operation to provide
as a parameter to the DescribeCreateAccountStatus operation.

* Check the AWS CloudTrail log for the CreateAccountResult event. For
information on using AWS CloudTrail with AWS Organizations, see Monitoring
the Activity in Your Organization (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_monitoring.html)
in the AWS Organizations User Guide.

The user who calls the API to create an account must have the organizations:CreateAccount permission. If you enabled all features in the organization, AWS Organizations creates the required service-linked role named AWSServiceRoleForOrganizations. For more information, see AWS Organizations and Service-Linked Roles (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_integrate_services.html#orgs_integrate_services-using_slrs) in the AWS Organizations User Guide.

AWS Organizations preconfigures the new member account with a role (named OrganizationAccountAccessRole by default) that grants users in the master account administrator permissions in the new member account. Principals in the master account can assume the role. AWS Organizations clones the company name and address information for the new account from the organization's master account.

This operation can be called only from the organization's master account.

For more information about creating accounts, see Creating an AWS Account in Your Organization (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_create.html) in the AWS Organizations User Guide.

* When you create an account in an organization using the AWS Organizations
console, API, or CLI commands, the information required for the account
to operate as a standalone account, such as a payment method and signing
the end user license agreement (EULA) is not automatically collected.
If you must remove an account from your organization later, you can do
so only after you provide the missing information. Follow the steps at
To leave an organization as a member account (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
in the AWS Organizations User Guide.

* If you get an exception that indicates that you exceeded your account
limits for the organization, contact AWS Support (https://console.aws.amazon.com/support/home#/).

* If you get an exception that indicates that the operation failed because
your organization is still initializing, wait one hour and then try again.
If the error persists, contact AWS Support (https://console.aws.amazon.com/support/home#/).

* Using CreateAccount to create multiple temporary accounts isn't recommended.
You can only close an account from the Billing and Cost Management Console,
and you must be signed in as the root user. For information on the requirements
and process for closing an account, see Closing an AWS Account (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_close.html)
in the AWS Organizations User Guide.

When you create a member account with this operation, you can choose whether to create the account with the IAM User and Role Access to Billing Information switch enabled. If you enable it, IAM users and roles that have appropriate permissions can view billing information for the account. If you disable it, only the account root user can access billing information. For information about how to disable this switch for an account, see Granting Access to Your Billing Information and Tools (https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/grantaccess.html).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation CreateAccount for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeConstraintViolationException "ConstraintViolationException"
Performing this operation violates a minimum or maximum value limit. For
example, attempting to remove the last service control policy (SCP) from
an OU or root, inviting or creating too many accounts to the organization,
or attaching too many policies to an account, OU, or root. This exception
includes a reason that contains additional information about the violated
limit.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
   from the organization that doesn't yet have enough information to exist
   as a standalone account. This account requires you to first agree to the
   AWS Customer Agreement. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
   an account from the organization that doesn't yet have enough information
   to exist as a standalone account. This account requires you to first complete
   phone verification. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
   of accounts that you can create in one day.

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. If you need more accounts,
   contact AWS Support (https://console.aws.amazon.com/support/home#/) to
   request an increase in your limit. Or the number of invitations that you
   tried to send would cause you to exceed the limit of accounts in your
   organization. Send fewer invitations or contact AWS Support to request
   an increase in the number of accounts. Deleted and closed accounts still
   count toward your limit. If you get receive this exception when running
   a command immediately after creating the organization, wait one hour and
   try again. If after an hour it continues to fail with this error, contact
   AWS Support (https://console.aws.amazon.com/support/home#/).

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
   in this organization, you first must migrate the organization's master
   account to the marketplace that corresponds to the master account's address.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be associated
   with the same marketplace.

   * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
   must first provide contact a valid address and phone number for the master
   account. Then try the operation again.

   * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
   master account must have an associated account in the AWS GovCloud (US-West)
   Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
   in the AWS GovCloud User Guide.

   * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
   with this master account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
   number of policies of a certain type that can be attached to an entity
   at one time.

   * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
   on this resource.

   * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
   with this member account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
   policy from an entity that would cause the entity to have fewer than the
   minimum number of policies of a certain type required.

   * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
   too many levels deep.

   * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
   that requires the organization to be configured to support all features.
   An organization that supports only consolidated billing features can't
   perform this operation.

   * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
   that you can have in an organization.

   * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
   policies that you can have in an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeFinalizingOrganizationException "FinalizingOrganizationException"
AWS Organizations couldn't perform the operation because your organization
hasn't finished initializing. This can take up to an hour. Try again later.
If after one hour you continue to receive this error, contact AWS Support
(https://console.aws.amazon.com/support/home#/).

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

* ErrCodeUnsupportedAPIEndpointException "UnsupportedAPIEndpointException"
This action isn't available in the current Region.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/CreateAccount

svc := organizations.New(session.New())
input := &organizations.CreateAccountInput{
    AccountName: aws.String("Production Account"),
    Email:       aws.String("susan@example.com"),
}

result, err := svc.CreateAccount(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeConstraintViolationException:
            fmt.Println(organizations.ErrCodeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeFinalizingOrganizationException:
            fmt.Println(organizations.ErrCodeFinalizingOrganizationException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        case organizations.ErrCodeUnsupportedAPIEndpointException:
            fmt.Println(organizations.ErrCodeUnsupportedAPIEndpointException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) CreateAccountRequest ¶

func (c *Organizations) CreateAccountRequest(input *CreateAccountInput) (req *request.Request, output *CreateAccountOutput)

CreateAccountRequest generates a "aws/request.Request" representing the client's request for the CreateAccount operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateAccount for more information on using the CreateAccount API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateAccountRequest method.
req, resp := client.CreateAccountRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/CreateAccount

func (*Organizations) CreateAccountWithContext ¶

func (c *Organizations) CreateAccountWithContext(ctx aws.Context, input *CreateAccountInput, opts ...request.Option) (*CreateAccountOutput, error)

CreateAccountWithContext is the same as CreateAccount with the addition of the ability to pass a context and additional request options.

See CreateAccount for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) CreateGovCloudAccount ¶

func (c *Organizations) CreateGovCloudAccount(input *CreateGovCloudAccountInput) (*CreateGovCloudAccountOutput, error)

CreateGovCloudAccount API operation for AWS Organizations.

This action is available if all of the following are true:

* You're authorized to create accounts in the AWS GovCloud (US) Region.
For more information on the AWS GovCloud (US) Region, see the AWS GovCloud
User Guide. (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/welcome.html)

* You already have an account in the AWS GovCloud (US) Region that is
associated with your master account in the commercial Region.

* You call this action from the master account of your organization in
the commercial Region.

* You have the organizations:CreateGovCloudAccount permission. AWS Organizations
creates the required service-linked role named AWSServiceRoleForOrganizations.
For more information, see AWS Organizations and Service-Linked Roles (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_integrate_services.html#orgs_integrate_services-using_slrs)
in the AWS Organizations User Guide.

AWS automatically enables AWS CloudTrail for AWS GovCloud (US) accounts, but you should also do the following:

* Verify that AWS CloudTrail is enabled to store logs.

* Create an S3 bucket for AWS CloudTrail log storage. For more information,
see Verifying AWS CloudTrail Is Enabled (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/verifying-cloudtrail.html)
in the AWS GovCloud User Guide.

You call this action from the master account of your organization in the commercial Region to create a standalone AWS account in the AWS GovCloud (US) Region. After the account is created, the master account of an organization in the AWS GovCloud (US) Region can invite it to that organization. For more information on inviting standalone accounts in the AWS GovCloud (US) to join an organization, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html) in the AWS GovCloud User Guide.

Calling CreateGovCloudAccount is an asynchronous request that AWS performs in the background. Because CreateGovCloudAccount operates asynchronously, it can return a successful completion message even though account initialization might still be in progress. You might need to wait a few minutes before you can successfully access the account. To check the status of the request, do one of the following:

* Use the OperationId response element from this operation to provide
as a parameter to the DescribeCreateAccountStatus operation.

* Check the AWS CloudTrail log for the CreateAccountResult event. For
information on using AWS CloudTrail with Organizations, see Monitoring
the Activity in Your Organization (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_monitoring.html)
in the AWS Organizations User Guide.

When you call the CreateGovCloudAccount action, you create two accounts: a standalone account in the AWS GovCloud (US) Region and an associated account in the commercial Region for billing and support purposes. The account in the commercial Region is automatically a member of the organization whose credentials made the request. Both accounts are associated with the same email address.

A role is created in the new account in the commercial Region that allows the master account in the organization in the commercial Region to assume it. An AWS GovCloud (US) account is then created and associated with the commercial account that you just created. A role is created in the new AWS GovCloud (US) account that can be assumed by the AWS GovCloud (US) account that is associated with the master account of the commercial organization. For more information and to view a diagram that explains how account access works, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html) in the AWS GovCloud User Guide.

For more information about creating accounts, see Creating an AWS Account in Your Organization (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_create.html) in the AWS Organizations User Guide.

* When you create an account in an organization using the AWS Organizations
console, API, or CLI commands, the information required for the account
to operate as a standalone account, such as a payment method and signing
the end user license agreement (EULA) is not automatically collected.
If you must remove an account from your organization later, you can do
so only after you provide the missing information. Follow the steps at
To leave an organization as a member account (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
in the AWS Organizations User Guide.

* If you get an exception that indicates that you exceeded your account
limits for the organization, contact AWS Support (https://console.aws.amazon.com/support/home#/).

* If you get an exception that indicates that the operation failed because
your organization is still initializing, wait one hour and then try again.
If the error persists, contact AWS Support (https://console.aws.amazon.com/support/home#/).

* Using CreateGovCloudAccount to create multiple temporary accounts isn't
recommended. You can only close an account from the AWS Billing and Cost
Management console, and you must be signed in as the root user. For information
on the requirements and process for closing an account, see Closing an
AWS Account (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_close.html)
in the AWS Organizations User Guide.

When you create a member account with this operation, you can choose whether to create the account with the IAM User and Role Access to Billing Information switch enabled. If you enable it, IAM users and roles that have appropriate permissions can view billing information for the account. If you disable it, only the account root user can access billing information. For information about how to disable this switch for an account, see Granting Access to Your Billing Information and Tools (https://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/grantaccess.html).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation CreateGovCloudAccount for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeConstraintViolationException "ConstraintViolationException"
Performing this operation violates a minimum or maximum value limit. For
example, attempting to remove the last service control policy (SCP) from
an OU or root, inviting or creating too many accounts to the organization,
or attaching too many policies to an account, OU, or root. This exception
includes a reason that contains additional information about the violated
limit.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
   from the organization that doesn't yet have enough information to exist
   as a standalone account. This account requires you to first agree to the
   AWS Customer Agreement. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
   an account from the organization that doesn't yet have enough information
   to exist as a standalone account. This account requires you to first complete
   phone verification. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
   of accounts that you can create in one day.

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. If you need more accounts,
   contact AWS Support (https://console.aws.amazon.com/support/home#/) to
   request an increase in your limit. Or the number of invitations that you
   tried to send would cause you to exceed the limit of accounts in your
   organization. Send fewer invitations or contact AWS Support to request
   an increase in the number of accounts. Deleted and closed accounts still
   count toward your limit. If you get receive this exception when running
   a command immediately after creating the organization, wait one hour and
   try again. If after an hour it continues to fail with this error, contact
   AWS Support (https://console.aws.amazon.com/support/home#/).

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
   in this organization, you first must migrate the organization's master
   account to the marketplace that corresponds to the master account's address.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be associated
   with the same marketplace.

   * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
   must first provide contact a valid address and phone number for the master
   account. Then try the operation again.

   * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
   master account must have an associated account in the AWS GovCloud (US-West)
   Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
   in the AWS GovCloud User Guide.

   * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
   with this master account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
   number of policies of a certain type that can be attached to an entity
   at one time.

   * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
   on this resource.

   * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
   with this member account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
   policy from an entity that would cause the entity to have fewer than the
   minimum number of policies of a certain type required.

   * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
   too many levels deep.

   * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
   that requires the organization to be configured to support all features.
   An organization that supports only consolidated billing features can't
   perform this operation.

   * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
   that you can have in an organization.

   * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
   policies that you can have in an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeFinalizingOrganizationException "FinalizingOrganizationException"
AWS Organizations couldn't perform the operation because your organization
hasn't finished initializing. This can take up to an hour. Try again later.
If after one hour you continue to receive this error, contact AWS Support
(https://console.aws.amazon.com/support/home#/).

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

* ErrCodeUnsupportedAPIEndpointException "UnsupportedAPIEndpointException"
This action isn't available in the current Region.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/CreateGovCloudAccount

func (*Organizations) CreateGovCloudAccountRequest ¶

func (c *Organizations) CreateGovCloudAccountRequest(input *CreateGovCloudAccountInput) (req *request.Request, output *CreateGovCloudAccountOutput)

CreateGovCloudAccountRequest generates a "aws/request.Request" representing the client's request for the CreateGovCloudAccount operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateGovCloudAccount for more information on using the CreateGovCloudAccount API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateGovCloudAccountRequest method.
req, resp := client.CreateGovCloudAccountRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/CreateGovCloudAccount

func (*Organizations) CreateGovCloudAccountWithContext ¶

func (c *Organizations) CreateGovCloudAccountWithContext(ctx aws.Context, input *CreateGovCloudAccountInput, opts ...request.Option) (*CreateGovCloudAccountOutput, error)

CreateGovCloudAccountWithContext is the same as CreateGovCloudAccount with the addition of the ability to pass a context and additional request options.

See CreateGovCloudAccount for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) CreateOrganization ¶

func (c *Organizations) CreateOrganization(input *CreateOrganizationInput) (*CreateOrganizationOutput, error)

CreateOrganization API operation for AWS Organizations.

Creates an AWS organization. The account whose user is calling the CreateOrganization operation automatically becomes the master account (https://docs.aws.amazon.com/IAM/latest/UserGuide/orgs_getting-started_concepts.html#account) of the new organization.

This operation must be called using credentials from the account that is to become the new organization's master account. The principal must also have the relevant IAM permissions.

By default (or if you set the FeatureSet parameter to ALL), the new organization is created with all features enabled and service control policies automatically enabled in the root. If you instead choose to create the organization supporting only the consolidated billing features by setting the FeatureSet parameter to CONSOLIDATED_BILLING", no policy types are enabled by default, and you can't use organization policies.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation CreateOrganization for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAlreadyInOrganizationException "AlreadyInOrganizationException"
This account is already a member of an organization. An account can belong
to only one organization at a time.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeConstraintViolationException "ConstraintViolationException"
Performing this operation violates a minimum or maximum value limit. For
example, attempting to remove the last service control policy (SCP) from
an OU or root, inviting or creating too many accounts to the organization,
or attaching too many policies to an account, OU, or root. This exception
includes a reason that contains additional information about the violated
limit.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
   from the organization that doesn't yet have enough information to exist
   as a standalone account. This account requires you to first agree to the
   AWS Customer Agreement. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
   an account from the organization that doesn't yet have enough information
   to exist as a standalone account. This account requires you to first complete
   phone verification. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
   of accounts that you can create in one day.

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. If you need more accounts,
   contact AWS Support (https://console.aws.amazon.com/support/home#/) to
   request an increase in your limit. Or the number of invitations that you
   tried to send would cause you to exceed the limit of accounts in your
   organization. Send fewer invitations or contact AWS Support to request
   an increase in the number of accounts. Deleted and closed accounts still
   count toward your limit. If you get receive this exception when running
   a command immediately after creating the organization, wait one hour and
   try again. If after an hour it continues to fail with this error, contact
   AWS Support (https://console.aws.amazon.com/support/home#/).

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
   in this organization, you first must migrate the organization's master
   account to the marketplace that corresponds to the master account's address.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be associated
   with the same marketplace.

   * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
   must first provide contact a valid address and phone number for the master
   account. Then try the operation again.

   * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
   master account must have an associated account in the AWS GovCloud (US-West)
   Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
   in the AWS GovCloud User Guide.

   * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
   with this master account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
   number of policies of a certain type that can be attached to an entity
   at one time.

   * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
   on this resource.

   * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
   with this member account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
   policy from an entity that would cause the entity to have fewer than the
   minimum number of policies of a certain type required.

   * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
   too many levels deep.

   * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
   that requires the organization to be configured to support all features.
   An organization that supports only consolidated billing features can't
   perform this operation.

   * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
   that you can have in an organization.

   * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
   policies that you can have in an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

* ErrCodeAccessDeniedForDependencyException "AccessDeniedForDependencyException"
The operation that you attempted requires you to have the iam:CreateServiceLinkedRole
for organizations.amazonaws.com permission so that AWS Organizations can
create the required service-linked role. You don't have that permission.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/CreateOrganization

svc := organizations.New(session.New())
input := &organizations.CreateOrganizationInput{}

result, err := svc.CreateOrganization(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAlreadyInOrganizationException:
            fmt.Println(organizations.ErrCodeAlreadyInOrganizationException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeConstraintViolationException:
            fmt.Println(organizations.ErrCodeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        case organizations.ErrCodeAccessDeniedForDependencyException:
            fmt.Println(organizations.ErrCodeAccessDeniedForDependencyException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

svc := organizations.New(session.New())
input := &organizations.CreateOrganizationInput{
    FeatureSet: aws.String("CONSOLIDATED_BILLING"),
}

result, err := svc.CreateOrganization(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAlreadyInOrganizationException:
            fmt.Println(organizations.ErrCodeAlreadyInOrganizationException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeConstraintViolationException:
            fmt.Println(organizations.ErrCodeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        case organizations.ErrCodeAccessDeniedForDependencyException:
            fmt.Println(organizations.ErrCodeAccessDeniedForDependencyException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) CreateOrganizationRequest ¶

func (c *Organizations) CreateOrganizationRequest(input *CreateOrganizationInput) (req *request.Request, output *CreateOrganizationOutput)

CreateOrganizationRequest generates a "aws/request.Request" representing the client's request for the CreateOrganization operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateOrganization for more information on using the CreateOrganization API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateOrganizationRequest method.
req, resp := client.CreateOrganizationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/CreateOrganization

func (*Organizations) CreateOrganizationWithContext ¶

func (c *Organizations) CreateOrganizationWithContext(ctx aws.Context, input *CreateOrganizationInput, opts ...request.Option) (*CreateOrganizationOutput, error)

CreateOrganizationWithContext is the same as CreateOrganization with the addition of the ability to pass a context and additional request options.

See CreateOrganization for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) CreateOrganizationalUnit ¶

func (c *Organizations) CreateOrganizationalUnit(input *CreateOrganizationalUnitInput) (*CreateOrganizationalUnitOutput, error)

CreateOrganizationalUnit API operation for AWS Organizations.

Creates an organizational unit (OU) within a root or parent OU. An OU is a container for accounts that enables you to organize your accounts to apply policies according to your business requirements. The number of levels deep that you can nest OUs is dependent upon the policy types enabled for that root. For service control policies, the limit is five.

For more information about OUs, see Managing Organizational Units (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_ous.html) in the AWS Organizations User Guide.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation CreateOrganizationalUnit for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeConstraintViolationException "ConstraintViolationException"
Performing this operation violates a minimum or maximum value limit. For
example, attempting to remove the last service control policy (SCP) from
an OU or root, inviting or creating too many accounts to the organization,
or attaching too many policies to an account, OU, or root. This exception
includes a reason that contains additional information about the violated
limit.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
   from the organization that doesn't yet have enough information to exist
   as a standalone account. This account requires you to first agree to the
   AWS Customer Agreement. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
   an account from the organization that doesn't yet have enough information
   to exist as a standalone account. This account requires you to first complete
   phone verification. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
   of accounts that you can create in one day.

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. If you need more accounts,
   contact AWS Support (https://console.aws.amazon.com/support/home#/) to
   request an increase in your limit. Or the number of invitations that you
   tried to send would cause you to exceed the limit of accounts in your
   organization. Send fewer invitations or contact AWS Support to request
   an increase in the number of accounts. Deleted and closed accounts still
   count toward your limit. If you get receive this exception when running
   a command immediately after creating the organization, wait one hour and
   try again. If after an hour it continues to fail with this error, contact
   AWS Support (https://console.aws.amazon.com/support/home#/).

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
   in this organization, you first must migrate the organization's master
   account to the marketplace that corresponds to the master account's address.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be associated
   with the same marketplace.

   * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
   must first provide contact a valid address and phone number for the master
   account. Then try the operation again.

   * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
   master account must have an associated account in the AWS GovCloud (US-West)
   Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
   in the AWS GovCloud User Guide.

   * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
   with this master account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
   number of policies of a certain type that can be attached to an entity
   at one time.

   * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
   on this resource.

   * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
   with this member account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
   policy from an entity that would cause the entity to have fewer than the
   minimum number of policies of a certain type required.

   * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
   too many levels deep.

   * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
   that requires the organization to be configured to support all features.
   An organization that supports only consolidated billing features can't
   perform this operation.

   * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
   that you can have in an organization.

   * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
   policies that you can have in an organization.

* ErrCodeDuplicateOrganizationalUnitException "DuplicateOrganizationalUnitException"
An OU with the same name already exists.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeParentNotFoundException "ParentNotFoundException"
We can't find a root or OU with the ParentId that you specified.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/CreateOrganizationalUnit

svc := organizations.New(session.New())
input := &organizations.CreateOrganizationalUnitInput{
    Name:     aws.String("AccountingOU"),
    ParentId: aws.String("r-examplerootid111"),
}

result, err := svc.CreateOrganizationalUnit(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeConstraintViolationException:
            fmt.Println(organizations.ErrCodeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeDuplicateOrganizationalUnitException:
            fmt.Println(organizations.ErrCodeDuplicateOrganizationalUnitException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeParentNotFoundException:
            fmt.Println(organizations.ErrCodeParentNotFoundException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) CreateOrganizationalUnitRequest ¶

func (c *Organizations) CreateOrganizationalUnitRequest(input *CreateOrganizationalUnitInput) (req *request.Request, output *CreateOrganizationalUnitOutput)

CreateOrganizationalUnitRequest generates a "aws/request.Request" representing the client's request for the CreateOrganizationalUnit operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreateOrganizationalUnit for more information on using the CreateOrganizationalUnit API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreateOrganizationalUnitRequest method.
req, resp := client.CreateOrganizationalUnitRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/CreateOrganizationalUnit

func (*Organizations) CreateOrganizationalUnitWithContext ¶

func (c *Organizations) CreateOrganizationalUnitWithContext(ctx aws.Context, input *CreateOrganizationalUnitInput, opts ...request.Option) (*CreateOrganizationalUnitOutput, error)

CreateOrganizationalUnitWithContext is the same as CreateOrganizationalUnit with the addition of the ability to pass a context and additional request options.

See CreateOrganizationalUnit for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) CreatePolicy ¶

func (c *Organizations) CreatePolicy(input *CreatePolicyInput) (*CreatePolicyOutput, error)

CreatePolicy API operation for AWS Organizations.

Creates a policy of a specified type that you can attach to a root, an organizational unit (OU), or an individual AWS account.

For more information about policies and their use, see Managing Organization Policies (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_policies.html).

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation CreatePolicy for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeConstraintViolationException "ConstraintViolationException"
Performing this operation violates a minimum or maximum value limit. For
example, attempting to remove the last service control policy (SCP) from
an OU or root, inviting or creating too many accounts to the organization,
or attaching too many policies to an account, OU, or root. This exception
includes a reason that contains additional information about the violated
limit.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
   from the organization that doesn't yet have enough information to exist
   as a standalone account. This account requires you to first agree to the
   AWS Customer Agreement. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
   an account from the organization that doesn't yet have enough information
   to exist as a standalone account. This account requires you to first complete
   phone verification. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
   of accounts that you can create in one day.

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. If you need more accounts,
   contact AWS Support (https://console.aws.amazon.com/support/home#/) to
   request an increase in your limit. Or the number of invitations that you
   tried to send would cause you to exceed the limit of accounts in your
   organization. Send fewer invitations or contact AWS Support to request
   an increase in the number of accounts. Deleted and closed accounts still
   count toward your limit. If you get receive this exception when running
   a command immediately after creating the organization, wait one hour and
   try again. If after an hour it continues to fail with this error, contact
   AWS Support (https://console.aws.amazon.com/support/home#/).

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
   in this organization, you first must migrate the organization's master
   account to the marketplace that corresponds to the master account's address.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be associated
   with the same marketplace.

   * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
   must first provide contact a valid address and phone number for the master
   account. Then try the operation again.

   * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
   master account must have an associated account in the AWS GovCloud (US-West)
   Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
   in the AWS GovCloud User Guide.

   * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
   with this master account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
   number of policies of a certain type that can be attached to an entity
   at one time.

   * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
   on this resource.

   * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
   with this member account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
   policy from an entity that would cause the entity to have fewer than the
   minimum number of policies of a certain type required.

   * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
   too many levels deep.

   * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
   that requires the organization to be configured to support all features.
   An organization that supports only consolidated billing features can't
   perform this operation.

   * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
   that you can have in an organization.

   * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
   policies that you can have in an organization.

* ErrCodeDuplicatePolicyException "DuplicatePolicyException"
A policy with the same name already exists.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeMalformedPolicyDocumentException "MalformedPolicyDocumentException"
The provided policy document doesn't meet the requirements of the specified
policy type. For example, the syntax might be incorrect. For details about
service control policy syntax, see Service Control Policy Syntax (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_scp-syntax.html)
in the AWS Organizations User Guide.

* ErrCodePolicyTypeNotAvailableForOrganizationException "PolicyTypeNotAvailableForOrganizationException"
You can't use the specified policy type with the feature set currently enabled
for this organization. For example, you can enable SCPs only after you enable
all features in the organization. For more information, see Enabling and
Disabling a Policy Type on a Root (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_policies.html#enable_policies_on_root)
in the AWS Organizations User Guide.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/CreatePolicy

svc := organizations.New(session.New())
input := &organizations.CreatePolicyInput{
    Content:     aws.String("{\\\"Version\\\":\\\"2012-10-17\\\",\\\"Statement\\\":{\\\"Effect\\\":\\\"Allow\\\",\\\"Action\\\":\\\"s3:*\\\"}}"),
    Description: aws.String("Enables admins of attached accounts to delegate all S3 permissions"),
    Name:        aws.String("AllowAllS3Actions"),
    Type:        aws.String("SERVICE_CONTROL_POLICY"),
}

result, err := svc.CreatePolicy(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeConstraintViolationException:
            fmt.Println(organizations.ErrCodeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeDuplicatePolicyException:
            fmt.Println(organizations.ErrCodeDuplicatePolicyException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeMalformedPolicyDocumentException:
            fmt.Println(organizations.ErrCodeMalformedPolicyDocumentException, aerr.Error())
        case organizations.ErrCodePolicyTypeNotAvailableForOrganizationException:
            fmt.Println(organizations.ErrCodePolicyTypeNotAvailableForOrganizationException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) CreatePolicyRequest ¶

func (c *Organizations) CreatePolicyRequest(input *CreatePolicyInput) (req *request.Request, output *CreatePolicyOutput)

CreatePolicyRequest generates a "aws/request.Request" representing the client's request for the CreatePolicy operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See CreatePolicy for more information on using the CreatePolicy API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the CreatePolicyRequest method.
req, resp := client.CreatePolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/CreatePolicy

func (*Organizations) CreatePolicyWithContext ¶

func (c *Organizations) CreatePolicyWithContext(ctx aws.Context, input *CreatePolicyInput, opts ...request.Option) (*CreatePolicyOutput, error)

CreatePolicyWithContext is the same as CreatePolicy with the addition of the ability to pass a context and additional request options.

See CreatePolicy for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) DeclineHandshake ¶

func (c *Organizations) DeclineHandshake(input *DeclineHandshakeInput) (*DeclineHandshakeOutput, error)

DeclineHandshake API operation for AWS Organizations.

Declines a handshake request. This sets the handshake state to DECLINED and effectively deactivates the request.

This operation can be called only from the account that received the handshake. The originator of the handshake can use CancelHandshake instead. The originator can't reactivate a declined request, but can reinitiate the process with a new handshake request.

After you decline a handshake, it continues to appear in the results of relevant APIs for only 30 days. After that, it's deleted.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation DeclineHandshake for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeHandshakeNotFoundException "HandshakeNotFoundException"
We can't find a handshake with the HandshakeId that you specified.

* ErrCodeInvalidHandshakeTransitionException "InvalidHandshakeTransitionException"
You can't perform the operation on the handshake in its current state. For
example, you can't cancel a handshake that was already accepted or accept
a handshake that was already declined.

* ErrCodeHandshakeAlreadyInStateException "HandshakeAlreadyInStateException"
The specified handshake is already in the requested state. For example, you
can't accept a handshake that was already accepted.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DeclineHandshake

svc := organizations.New(session.New())
input := &organizations.DeclineHandshakeInput{
    HandshakeId: aws.String("h-examplehandshakeid111"),
}

result, err := svc.DeclineHandshake(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeHandshakeNotFoundException:
            fmt.Println(organizations.ErrCodeHandshakeNotFoundException, aerr.Error())
        case organizations.ErrCodeInvalidHandshakeTransitionException:
            fmt.Println(organizations.ErrCodeInvalidHandshakeTransitionException, aerr.Error())
        case organizations.ErrCodeHandshakeAlreadyInStateException:
            fmt.Println(organizations.ErrCodeHandshakeAlreadyInStateException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) DeclineHandshakeRequest ¶

func (c *Organizations) DeclineHandshakeRequest(input *DeclineHandshakeInput) (req *request.Request, output *DeclineHandshakeOutput)

DeclineHandshakeRequest generates a "aws/request.Request" representing the client's request for the DeclineHandshake operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeclineHandshake for more information on using the DeclineHandshake API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeclineHandshakeRequest method.
req, resp := client.DeclineHandshakeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DeclineHandshake

func (*Organizations) DeclineHandshakeWithContext ¶

func (c *Organizations) DeclineHandshakeWithContext(ctx aws.Context, input *DeclineHandshakeInput, opts ...request.Option) (*DeclineHandshakeOutput, error)

DeclineHandshakeWithContext is the same as DeclineHandshake with the addition of the ability to pass a context and additional request options.

See DeclineHandshake for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) DeleteOrganization ¶

func (c *Organizations) DeleteOrganization(input *DeleteOrganizationInput) (*DeleteOrganizationOutput, error)

DeleteOrganization API operation for AWS Organizations.

Deletes the organization. You can delete an organization only by using credentials from the master account. The organization must be empty of member accounts.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation DeleteOrganization for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeOrganizationNotEmptyException "OrganizationNotEmptyException"
The organization isn't empty. To delete an organization, you must first remove
all accounts except the master account, delete all OUs, and delete all policies.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DeleteOrganization

func (*Organizations) DeleteOrganizationRequest ¶

func (c *Organizations) DeleteOrganizationRequest(input *DeleteOrganizationInput) (req *request.Request, output *DeleteOrganizationOutput)

DeleteOrganizationRequest generates a "aws/request.Request" representing the client's request for the DeleteOrganization operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteOrganization for more information on using the DeleteOrganization API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteOrganizationRequest method.
req, resp := client.DeleteOrganizationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DeleteOrganization

func (*Organizations) DeleteOrganizationWithContext ¶

func (c *Organizations) DeleteOrganizationWithContext(ctx aws.Context, input *DeleteOrganizationInput, opts ...request.Option) (*DeleteOrganizationOutput, error)

DeleteOrganizationWithContext is the same as DeleteOrganization with the addition of the ability to pass a context and additional request options.

See DeleteOrganization for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) DeleteOrganizationalUnit ¶

func (c *Organizations) DeleteOrganizationalUnit(input *DeleteOrganizationalUnitInput) (*DeleteOrganizationalUnitOutput, error)

DeleteOrganizationalUnit API operation for AWS Organizations.

Deletes an organizational unit (OU) from a root or another OU. You must first remove all accounts and child OUs from the OU that you want to delete.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation DeleteOrganizationalUnit for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeOrganizationalUnitNotEmptyException "OrganizationalUnitNotEmptyException"
The specified OU is not empty. Move all accounts to another root or to other
OUs, remove all child OUs, and try the operation again.

* ErrCodeOrganizationalUnitNotFoundException "OrganizationalUnitNotFoundException"
We can't find an OU with the OrganizationalUnitId that you specified.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DeleteOrganizationalUnit

svc := organizations.New(session.New())
input := &organizations.DeleteOrganizationalUnitInput{
    OrganizationalUnitId: aws.String("ou-examplerootid111-exampleouid111"),
}

result, err := svc.DeleteOrganizationalUnit(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeOrganizationalUnitNotEmptyException:
            fmt.Println(organizations.ErrCodeOrganizationalUnitNotEmptyException, aerr.Error())
        case organizations.ErrCodeOrganizationalUnitNotFoundException:
            fmt.Println(organizations.ErrCodeOrganizationalUnitNotFoundException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) DeleteOrganizationalUnitRequest ¶

func (c *Organizations) DeleteOrganizationalUnitRequest(input *DeleteOrganizationalUnitInput) (req *request.Request, output *DeleteOrganizationalUnitOutput)

DeleteOrganizationalUnitRequest generates a "aws/request.Request" representing the client's request for the DeleteOrganizationalUnit operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeleteOrganizationalUnit for more information on using the DeleteOrganizationalUnit API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeleteOrganizationalUnitRequest method.
req, resp := client.DeleteOrganizationalUnitRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DeleteOrganizationalUnit

func (*Organizations) DeleteOrganizationalUnitWithContext ¶

func (c *Organizations) DeleteOrganizationalUnitWithContext(ctx aws.Context, input *DeleteOrganizationalUnitInput, opts ...request.Option) (*DeleteOrganizationalUnitOutput, error)

DeleteOrganizationalUnitWithContext is the same as DeleteOrganizationalUnit with the addition of the ability to pass a context and additional request options.

See DeleteOrganizationalUnit for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) DeletePolicy ¶

func (c *Organizations) DeletePolicy(input *DeletePolicyInput) (*DeletePolicyOutput, error)

DeletePolicy API operation for AWS Organizations.

Deletes the specified policy from your organization. Before you perform this operation, you must first detach the policy from all organizational units (OUs), roots, and accounts.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation DeletePolicy for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodePolicyInUseException "PolicyInUseException"
The policy is attached to one or more entities. You must detach it from all
roots, OUs, and accounts before performing this operation.

* ErrCodePolicyNotFoundException "PolicyNotFoundException"
We can't find a policy with the PolicyId that you specified.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DeletePolicy

svc := organizations.New(session.New())
input := &organizations.DeletePolicyInput{
    PolicyId: aws.String("p-examplepolicyid111"),
}

result, err := svc.DeletePolicy(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodePolicyInUseException:
            fmt.Println(organizations.ErrCodePolicyInUseException, aerr.Error())
        case organizations.ErrCodePolicyNotFoundException:
            fmt.Println(organizations.ErrCodePolicyNotFoundException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) DeletePolicyRequest ¶

func (c *Organizations) DeletePolicyRequest(input *DeletePolicyInput) (req *request.Request, output *DeletePolicyOutput)

DeletePolicyRequest generates a "aws/request.Request" representing the client's request for the DeletePolicy operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DeletePolicy for more information on using the DeletePolicy API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DeletePolicyRequest method.
req, resp := client.DeletePolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DeletePolicy

func (*Organizations) DeletePolicyWithContext ¶

func (c *Organizations) DeletePolicyWithContext(ctx aws.Context, input *DeletePolicyInput, opts ...request.Option) (*DeletePolicyOutput, error)

DeletePolicyWithContext is the same as DeletePolicy with the addition of the ability to pass a context and additional request options.

See DeletePolicy for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) DescribeAccount ¶

func (c *Organizations) DescribeAccount(input *DescribeAccountInput) (*DescribeAccountOutput, error)

DescribeAccount API operation for AWS Organizations.

Retrieves AWS Organizations-related information about the specified account.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation DescribeAccount for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAccountNotFoundException "AccountNotFoundException"
We can't find an AWS account with the AccountId that you specified, or the
account whose credentials you used to make this request isn't a member of
an organization.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DescribeAccount

svc := organizations.New(session.New())
input := &organizations.DescribeAccountInput{
    AccountId: aws.String("555555555555"),
}

result, err := svc.DescribeAccount(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAccountNotFoundException:
            fmt.Println(organizations.ErrCodeAccountNotFoundException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) DescribeAccountRequest ¶

func (c *Organizations) DescribeAccountRequest(input *DescribeAccountInput) (req *request.Request, output *DescribeAccountOutput)

DescribeAccountRequest generates a "aws/request.Request" representing the client's request for the DescribeAccount operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeAccount for more information on using the DescribeAccount API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeAccountRequest method.
req, resp := client.DescribeAccountRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DescribeAccount

func (*Organizations) DescribeAccountWithContext ¶

func (c *Organizations) DescribeAccountWithContext(ctx aws.Context, input *DescribeAccountInput, opts ...request.Option) (*DescribeAccountOutput, error)

DescribeAccountWithContext is the same as DescribeAccount with the addition of the ability to pass a context and additional request options.

See DescribeAccount for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) DescribeCreateAccountStatus ¶

func (c *Organizations) DescribeCreateAccountStatus(input *DescribeCreateAccountStatusInput) (*DescribeCreateAccountStatusOutput, error)

DescribeCreateAccountStatus API operation for AWS Organizations.

Retrieves the current status of an asynchronous request to create an account.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation DescribeCreateAccountStatus for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeCreateAccountStatusNotFoundException "CreateAccountStatusNotFoundException"
We can't find an create account request with the CreateAccountRequestId that
you specified.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

* ErrCodeUnsupportedAPIEndpointException "UnsupportedAPIEndpointException"
This action isn't available in the current Region.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DescribeCreateAccountStatus

svc := organizations.New(session.New())
input := &organizations.DescribeCreateAccountStatusInput{
    CreateAccountRequestId: aws.String("car-exampleaccountcreationrequestid"),
}

result, err := svc.DescribeCreateAccountStatus(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeCreateAccountStatusNotFoundException:
            fmt.Println(organizations.ErrCodeCreateAccountStatusNotFoundException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        case organizations.ErrCodeUnsupportedAPIEndpointException:
            fmt.Println(organizations.ErrCodeUnsupportedAPIEndpointException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) DescribeCreateAccountStatusRequest ¶

func (c *Organizations) DescribeCreateAccountStatusRequest(input *DescribeCreateAccountStatusInput) (req *request.Request, output *DescribeCreateAccountStatusOutput)

DescribeCreateAccountStatusRequest generates a "aws/request.Request" representing the client's request for the DescribeCreateAccountStatus operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeCreateAccountStatus for more information on using the DescribeCreateAccountStatus API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeCreateAccountStatusRequest method.
req, resp := client.DescribeCreateAccountStatusRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DescribeCreateAccountStatus

func (*Organizations) DescribeCreateAccountStatusWithContext ¶

func (c *Organizations) DescribeCreateAccountStatusWithContext(ctx aws.Context, input *DescribeCreateAccountStatusInput, opts ...request.Option) (*DescribeCreateAccountStatusOutput, error)

DescribeCreateAccountStatusWithContext is the same as DescribeCreateAccountStatus with the addition of the ability to pass a context and additional request options.

See DescribeCreateAccountStatus for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) DescribeHandshake ¶

func (c *Organizations) DescribeHandshake(input *DescribeHandshakeInput) (*DescribeHandshakeOutput, error)

DescribeHandshake API operation for AWS Organizations.

Retrieves information about a previously requested handshake. The handshake ID comes from the response to the original InviteAccountToOrganization operation that generated the handshake.

You can access handshakes that are ACCEPTED, DECLINED, or CANCELED for only 30 days after they change to that state. They're then deleted and no longer accessible.

This operation can be called from any account in the organization.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation DescribeHandshake for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeHandshakeNotFoundException "HandshakeNotFoundException"
We can't find a handshake with the HandshakeId that you specified.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DescribeHandshake

svc := organizations.New(session.New())
input := &organizations.DescribeHandshakeInput{
    HandshakeId: aws.String("h-examplehandshakeid111"),
}

result, err := svc.DescribeHandshake(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeHandshakeNotFoundException:
            fmt.Println(organizations.ErrCodeHandshakeNotFoundException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) DescribeHandshakeRequest ¶

func (c *Organizations) DescribeHandshakeRequest(input *DescribeHandshakeInput) (req *request.Request, output *DescribeHandshakeOutput)

DescribeHandshakeRequest generates a "aws/request.Request" representing the client's request for the DescribeHandshake operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeHandshake for more information on using the DescribeHandshake API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeHandshakeRequest method.
req, resp := client.DescribeHandshakeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DescribeHandshake

func (*Organizations) DescribeHandshakeWithContext ¶

func (c *Organizations) DescribeHandshakeWithContext(ctx aws.Context, input *DescribeHandshakeInput, opts ...request.Option) (*DescribeHandshakeOutput, error)

DescribeHandshakeWithContext is the same as DescribeHandshake with the addition of the ability to pass a context and additional request options.

See DescribeHandshake for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) DescribeOrganization ¶

func (c *Organizations) DescribeOrganization(input *DescribeOrganizationInput) (*DescribeOrganizationOutput, error)

DescribeOrganization API operation for AWS Organizations.

Retrieves information about the organization that the user's account belongs to.

This operation can be called from any account in the organization.

Even if a policy type is shown as available in the organization, you can disable it separately at the root level with DisablePolicyType. Use ListRoots to see the status of policy types for a specified root.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation DescribeOrganization for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DescribeOrganization

svc := organizations.New(session.New())
input := &organizations.DescribeOrganizationInput{}

result, err := svc.DescribeOrganization(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) DescribeOrganizationRequest ¶

func (c *Organizations) DescribeOrganizationRequest(input *DescribeOrganizationInput) (req *request.Request, output *DescribeOrganizationOutput)

DescribeOrganizationRequest generates a "aws/request.Request" representing the client's request for the DescribeOrganization operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeOrganization for more information on using the DescribeOrganization API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeOrganizationRequest method.
req, resp := client.DescribeOrganizationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DescribeOrganization

func (*Organizations) DescribeOrganizationWithContext ¶

func (c *Organizations) DescribeOrganizationWithContext(ctx aws.Context, input *DescribeOrganizationInput, opts ...request.Option) (*DescribeOrganizationOutput, error)

DescribeOrganizationWithContext is the same as DescribeOrganization with the addition of the ability to pass a context and additional request options.

See DescribeOrganization for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) DescribeOrganizationalUnit ¶

func (c *Organizations) DescribeOrganizationalUnit(input *DescribeOrganizationalUnitInput) (*DescribeOrganizationalUnitOutput, error)

DescribeOrganizationalUnit API operation for AWS Organizations.

Retrieves information about an organizational unit (OU).

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation DescribeOrganizationalUnit for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeOrganizationalUnitNotFoundException "OrganizationalUnitNotFoundException"
We can't find an OU with the OrganizationalUnitId that you specified.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DescribeOrganizationalUnit

svc := organizations.New(session.New())
input := &organizations.DescribeOrganizationalUnitInput{
    OrganizationalUnitId: aws.String("ou-examplerootid111-exampleouid111"),
}

result, err := svc.DescribeOrganizationalUnit(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeOrganizationalUnitNotFoundException:
            fmt.Println(organizations.ErrCodeOrganizationalUnitNotFoundException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) DescribeOrganizationalUnitRequest ¶

func (c *Organizations) DescribeOrganizationalUnitRequest(input *DescribeOrganizationalUnitInput) (req *request.Request, output *DescribeOrganizationalUnitOutput)

DescribeOrganizationalUnitRequest generates a "aws/request.Request" representing the client's request for the DescribeOrganizationalUnit operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribeOrganizationalUnit for more information on using the DescribeOrganizationalUnit API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribeOrganizationalUnitRequest method.
req, resp := client.DescribeOrganizationalUnitRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DescribeOrganizationalUnit

func (*Organizations) DescribeOrganizationalUnitWithContext ¶

func (c *Organizations) DescribeOrganizationalUnitWithContext(ctx aws.Context, input *DescribeOrganizationalUnitInput, opts ...request.Option) (*DescribeOrganizationalUnitOutput, error)

DescribeOrganizationalUnitWithContext is the same as DescribeOrganizationalUnit with the addition of the ability to pass a context and additional request options.

See DescribeOrganizationalUnit for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) DescribePolicy ¶

func (c *Organizations) DescribePolicy(input *DescribePolicyInput) (*DescribePolicyOutput, error)

DescribePolicy API operation for AWS Organizations.

Retrieves information about a policy.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation DescribePolicy for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodePolicyNotFoundException "PolicyNotFoundException"
We can't find a policy with the PolicyId that you specified.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DescribePolicy

svc := organizations.New(session.New())
input := &organizations.DescribePolicyInput{
    PolicyId: aws.String("p-examplepolicyid111"),
}

result, err := svc.DescribePolicy(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodePolicyNotFoundException:
            fmt.Println(organizations.ErrCodePolicyNotFoundException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) DescribePolicyRequest ¶

func (c *Organizations) DescribePolicyRequest(input *DescribePolicyInput) (req *request.Request, output *DescribePolicyOutput)

DescribePolicyRequest generates a "aws/request.Request" representing the client's request for the DescribePolicy operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DescribePolicy for more information on using the DescribePolicy API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DescribePolicyRequest method.
req, resp := client.DescribePolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DescribePolicy

func (*Organizations) DescribePolicyWithContext ¶

func (c *Organizations) DescribePolicyWithContext(ctx aws.Context, input *DescribePolicyInput, opts ...request.Option) (*DescribePolicyOutput, error)

DescribePolicyWithContext is the same as DescribePolicy with the addition of the ability to pass a context and additional request options.

See DescribePolicy for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) DetachPolicy ¶

func (c *Organizations) DetachPolicy(input *DetachPolicyInput) (*DetachPolicyOutput, error)

DetachPolicy API operation for AWS Organizations.

Detaches a policy from a target root, organizational unit (OU), or account. If the policy being detached is a service control policy (SCP), the changes to permissions for IAM users and roles in affected accounts are immediate.

Note: Every root, OU, and account must have at least one SCP attached. If you want to replace the default FullAWSAccess policy with one that limits the permissions that can be delegated, you must attach the replacement policy before you can remove the default one. This is the authorization strategy of whitelisting (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_policies_about-scps.html#orgs_policies_whitelist). If you instead attach a second SCP and leave the FullAWSAccess SCP still attached, and specify "Effect": "Deny" in the second SCP to override the "Effect": "Allow" in the FullAWSAccess policy (or any other attached SCP), you're using the authorization strategy of blacklisting (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_policies_about-scps.html#orgs_policies_blacklist) .

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation DetachPolicy for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeConstraintViolationException "ConstraintViolationException"
Performing this operation violates a minimum or maximum value limit. For
example, attempting to remove the last service control policy (SCP) from
an OU or root, inviting or creating too many accounts to the organization,
or attaching too many policies to an account, OU, or root. This exception
includes a reason that contains additional information about the violated
limit.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
   from the organization that doesn't yet have enough information to exist
   as a standalone account. This account requires you to first agree to the
   AWS Customer Agreement. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
   an account from the organization that doesn't yet have enough information
   to exist as a standalone account. This account requires you to first complete
   phone verification. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
   of accounts that you can create in one day.

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. If you need more accounts,
   contact AWS Support (https://console.aws.amazon.com/support/home#/) to
   request an increase in your limit. Or the number of invitations that you
   tried to send would cause you to exceed the limit of accounts in your
   organization. Send fewer invitations or contact AWS Support to request
   an increase in the number of accounts. Deleted and closed accounts still
   count toward your limit. If you get receive this exception when running
   a command immediately after creating the organization, wait one hour and
   try again. If after an hour it continues to fail with this error, contact
   AWS Support (https://console.aws.amazon.com/support/home#/).

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
   in this organization, you first must migrate the organization's master
   account to the marketplace that corresponds to the master account's address.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be associated
   with the same marketplace.

   * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
   must first provide contact a valid address and phone number for the master
   account. Then try the operation again.

   * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
   master account must have an associated account in the AWS GovCloud (US-West)
   Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
   in the AWS GovCloud User Guide.

   * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
   with this master account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
   number of policies of a certain type that can be attached to an entity
   at one time.

   * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
   on this resource.

   * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
   with this member account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
   policy from an entity that would cause the entity to have fewer than the
   minimum number of policies of a certain type required.

   * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
   too many levels deep.

   * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
   that requires the organization to be configured to support all features.
   An organization that supports only consolidated billing features can't
   perform this operation.

   * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
   that you can have in an organization.

   * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
   policies that you can have in an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodePolicyNotAttachedException "PolicyNotAttachedException"
The policy isn't attached to the specified target in the specified root.

* ErrCodePolicyNotFoundException "PolicyNotFoundException"
We can't find a policy with the PolicyId that you specified.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTargetNotFoundException "TargetNotFoundException"
We can't find a root, OU, or account with the TargetId that you specified.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DetachPolicy

svc := organizations.New(session.New())
input := &organizations.DetachPolicyInput{
    PolicyId: aws.String("p-examplepolicyid111"),
    TargetId: aws.String("ou-examplerootid111-exampleouid111"),
}

result, err := svc.DetachPolicy(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeConstraintViolationException:
            fmt.Println(organizations.ErrCodeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodePolicyNotAttachedException:
            fmt.Println(organizations.ErrCodePolicyNotAttachedException, aerr.Error())
        case organizations.ErrCodePolicyNotFoundException:
            fmt.Println(organizations.ErrCodePolicyNotFoundException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTargetNotFoundException:
            fmt.Println(organizations.ErrCodeTargetNotFoundException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) DetachPolicyRequest ¶

func (c *Organizations) DetachPolicyRequest(input *DetachPolicyInput) (req *request.Request, output *DetachPolicyOutput)

DetachPolicyRequest generates a "aws/request.Request" representing the client's request for the DetachPolicy operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DetachPolicy for more information on using the DetachPolicy API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DetachPolicyRequest method.
req, resp := client.DetachPolicyRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DetachPolicy

func (*Organizations) DetachPolicyWithContext ¶

func (c *Organizations) DetachPolicyWithContext(ctx aws.Context, input *DetachPolicyInput, opts ...request.Option) (*DetachPolicyOutput, error)

DetachPolicyWithContext is the same as DetachPolicy with the addition of the ability to pass a context and additional request options.

See DetachPolicy for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) DisableAWSServiceAccess ¶

func (c *Organizations) DisableAWSServiceAccess(input *DisableAWSServiceAccessInput) (*DisableAWSServiceAccessOutput, error)

DisableAWSServiceAccess API operation for AWS Organizations.

Disables the integration of an AWS service (the service that is specified by ServicePrincipal) with AWS Organizations. When you disable integration, the specified service no longer can create a service-linked role (http://docs.aws.amazon.com/IAM/latest/UserGuide/using-service-linked-roles.html) in new accounts in your organization. This means the service can't perform operations on your behalf on any new accounts in your organization. The service can still perform operations in older accounts until the service completes its clean-up from AWS Organizations.

We recommend that you disable integration between AWS Organizations and the specified AWS service by using the console or commands that are provided by the specified service. Doing so ensures that the other service is aware that it can clean up any resources that are required only for the integration. How the service cleans up its resources in the organization's accounts depends on that service. For more information, see the documentation for the other AWS service.

After you perform the DisableAWSServiceAccess operation, the specified service can no longer perform operations in your organization's accounts unless the operations are explicitly permitted by the IAM policies that are attached to your roles.

For more information about integrating other services with AWS Organizations, including the list of services that work with Organizations, see Integrating AWS Organizations with Other AWS Services (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_integrate_services.html) in the AWS Organizations User Guide.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation DisableAWSServiceAccess for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeConstraintViolationException "ConstraintViolationException"
Performing this operation violates a minimum or maximum value limit. For
example, attempting to remove the last service control policy (SCP) from
an OU or root, inviting or creating too many accounts to the organization,
or attaching too many policies to an account, OU, or root. This exception
includes a reason that contains additional information about the violated
limit.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
   from the organization that doesn't yet have enough information to exist
   as a standalone account. This account requires you to first agree to the
   AWS Customer Agreement. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
   an account from the organization that doesn't yet have enough information
   to exist as a standalone account. This account requires you to first complete
   phone verification. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
   of accounts that you can create in one day.

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. If you need more accounts,
   contact AWS Support (https://console.aws.amazon.com/support/home#/) to
   request an increase in your limit. Or the number of invitations that you
   tried to send would cause you to exceed the limit of accounts in your
   organization. Send fewer invitations or contact AWS Support to request
   an increase in the number of accounts. Deleted and closed accounts still
   count toward your limit. If you get receive this exception when running
   a command immediately after creating the organization, wait one hour and
   try again. If after an hour it continues to fail with this error, contact
   AWS Support (https://console.aws.amazon.com/support/home#/).

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
   in this organization, you first must migrate the organization's master
   account to the marketplace that corresponds to the master account's address.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be associated
   with the same marketplace.

   * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
   must first provide contact a valid address and phone number for the master
   account. Then try the operation again.

   * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
   master account must have an associated account in the AWS GovCloud (US-West)
   Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
   in the AWS GovCloud User Guide.

   * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
   with this master account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
   number of policies of a certain type that can be attached to an entity
   at one time.

   * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
   on this resource.

   * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
   with this member account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
   policy from an entity that would cause the entity to have fewer than the
   minimum number of policies of a certain type required.

   * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
   too many levels deep.

   * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
   that requires the organization to be configured to support all features.
   An organization that supports only consolidated billing features can't
   perform this operation.

   * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
   that you can have in an organization.

   * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
   policies that you can have in an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DisableAWSServiceAccess

func (*Organizations) DisableAWSServiceAccessRequest ¶

func (c *Organizations) DisableAWSServiceAccessRequest(input *DisableAWSServiceAccessInput) (req *request.Request, output *DisableAWSServiceAccessOutput)

DisableAWSServiceAccessRequest generates a "aws/request.Request" representing the client's request for the DisableAWSServiceAccess operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DisableAWSServiceAccess for more information on using the DisableAWSServiceAccess API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DisableAWSServiceAccessRequest method.
req, resp := client.DisableAWSServiceAccessRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DisableAWSServiceAccess

func (*Organizations) DisableAWSServiceAccessWithContext ¶

func (c *Organizations) DisableAWSServiceAccessWithContext(ctx aws.Context, input *DisableAWSServiceAccessInput, opts ...request.Option) (*DisableAWSServiceAccessOutput, error)

DisableAWSServiceAccessWithContext is the same as DisableAWSServiceAccess with the addition of the ability to pass a context and additional request options.

See DisableAWSServiceAccess for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) DisablePolicyType ¶

func (c *Organizations) DisablePolicyType(input *DisablePolicyTypeInput) (*DisablePolicyTypeOutput, error)

DisablePolicyType API operation for AWS Organizations.

Disables an organizational control policy type in a root. A policy of a certain type can be attached to entities in a root only if that type is enabled in the root. After you perform this operation, you no longer can attach policies of the specified type to that root or to any organizational unit (OU) or account in that root. You can undo this by using the EnablePolicyType operation.

This is an asynchronous request that AWS performs in the background. If you disable a policy for a root, it still appears enabled for the organization if all features (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html) are enabled for the organization. AWS recommends that you first use ListRoots to see the status of policy types for a specified root, and then use this operation.

This operation can be called only from the organization's master account.

To view the status of available policy types in the organization, use DescribeOrganization.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation DisablePolicyType for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeConstraintViolationException "ConstraintViolationException"
Performing this operation violates a minimum or maximum value limit. For
example, attempting to remove the last service control policy (SCP) from
an OU or root, inviting or creating too many accounts to the organization,
or attaching too many policies to an account, OU, or root. This exception
includes a reason that contains additional information about the violated
limit.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
   from the organization that doesn't yet have enough information to exist
   as a standalone account. This account requires you to first agree to the
   AWS Customer Agreement. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
   an account from the organization that doesn't yet have enough information
   to exist as a standalone account. This account requires you to first complete
   phone verification. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
   of accounts that you can create in one day.

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. If you need more accounts,
   contact AWS Support (https://console.aws.amazon.com/support/home#/) to
   request an increase in your limit. Or the number of invitations that you
   tried to send would cause you to exceed the limit of accounts in your
   organization. Send fewer invitations or contact AWS Support to request
   an increase in the number of accounts. Deleted and closed accounts still
   count toward your limit. If you get receive this exception when running
   a command immediately after creating the organization, wait one hour and
   try again. If after an hour it continues to fail with this error, contact
   AWS Support (https://console.aws.amazon.com/support/home#/).

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
   in this organization, you first must migrate the organization's master
   account to the marketplace that corresponds to the master account's address.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be associated
   with the same marketplace.

   * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
   must first provide contact a valid address and phone number for the master
   account. Then try the operation again.

   * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
   master account must have an associated account in the AWS GovCloud (US-West)
   Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
   in the AWS GovCloud User Guide.

   * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
   with this master account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
   number of policies of a certain type that can be attached to an entity
   at one time.

   * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
   on this resource.

   * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
   with this member account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
   policy from an entity that would cause the entity to have fewer than the
   minimum number of policies of a certain type required.

   * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
   too many levels deep.

   * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
   that requires the organization to be configured to support all features.
   An organization that supports only consolidated billing features can't
   perform this operation.

   * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
   that you can have in an organization.

   * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
   policies that you can have in an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodePolicyTypeNotEnabledException "PolicyTypeNotEnabledException"
The specified policy type isn't currently enabled in this root. You can't
attach policies of the specified type to entities in a root until you enable
that type in the root. For more information, see Enabling All Features in
Your Organization (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html)
in the AWS Organizations User Guide.

* ErrCodeRootNotFoundException "RootNotFoundException"
We can't find a root with the RootId that you specified.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DisablePolicyType

svc := organizations.New(session.New())
input := &organizations.DisablePolicyTypeInput{
    PolicyType: aws.String("SERVICE_CONTROL_POLICY"),
    RootId:     aws.String("r-examplerootid111"),
}

result, err := svc.DisablePolicyType(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeConstraintViolationException:
            fmt.Println(organizations.ErrCodeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodePolicyTypeNotEnabledException:
            fmt.Println(organizations.ErrCodePolicyTypeNotEnabledException, aerr.Error())
        case organizations.ErrCodeRootNotFoundException:
            fmt.Println(organizations.ErrCodeRootNotFoundException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) DisablePolicyTypeRequest ¶

func (c *Organizations) DisablePolicyTypeRequest(input *DisablePolicyTypeInput) (req *request.Request, output *DisablePolicyTypeOutput)

DisablePolicyTypeRequest generates a "aws/request.Request" representing the client's request for the DisablePolicyType operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See DisablePolicyType for more information on using the DisablePolicyType API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the DisablePolicyTypeRequest method.
req, resp := client.DisablePolicyTypeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/DisablePolicyType

func (*Organizations) DisablePolicyTypeWithContext ¶

func (c *Organizations) DisablePolicyTypeWithContext(ctx aws.Context, input *DisablePolicyTypeInput, opts ...request.Option) (*DisablePolicyTypeOutput, error)

DisablePolicyTypeWithContext is the same as DisablePolicyType with the addition of the ability to pass a context and additional request options.

See DisablePolicyType for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) EnableAWSServiceAccess ¶

func (c *Organizations) EnableAWSServiceAccess(input *EnableAWSServiceAccessInput) (*EnableAWSServiceAccessOutput, error)

EnableAWSServiceAccess API operation for AWS Organizations.

Enables the integration of an AWS service (the service that is specified by ServicePrincipal) with AWS Organizations. When you enable integration, you allow the specified service to create a service-linked role (http://docs.aws.amazon.com/IAM/latest/UserGuide/using-service-linked-roles.html) in all the accounts in your organization. This allows the service to perform operations on your behalf in your organization and its accounts.

We recommend that you enable integration between AWS Organizations and the specified AWS service by using the console or commands that are provided by the specified service. Doing so ensures that the service is aware that it can create the resources that are required for the integration. How the service creates those resources in the organization's accounts depends on that service. For more information, see the documentation for the other AWS service.

For more information about enabling services to integrate with AWS Organizations, see Integrating AWS Organizations with Other AWS Services (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_integrate_services.html) in the AWS Organizations User Guide.

This operation can be called only from the organization's master account and only if the organization has enabled all features (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html).

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation EnableAWSServiceAccess for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeConstraintViolationException "ConstraintViolationException"
Performing this operation violates a minimum or maximum value limit. For
example, attempting to remove the last service control policy (SCP) from
an OU or root, inviting or creating too many accounts to the organization,
or attaching too many policies to an account, OU, or root. This exception
includes a reason that contains additional information about the violated
limit.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
   from the organization that doesn't yet have enough information to exist
   as a standalone account. This account requires you to first agree to the
   AWS Customer Agreement. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
   an account from the organization that doesn't yet have enough information
   to exist as a standalone account. This account requires you to first complete
   phone verification. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
   of accounts that you can create in one day.

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. If you need more accounts,
   contact AWS Support (https://console.aws.amazon.com/support/home#/) to
   request an increase in your limit. Or the number of invitations that you
   tried to send would cause you to exceed the limit of accounts in your
   organization. Send fewer invitations or contact AWS Support to request
   an increase in the number of accounts. Deleted and closed accounts still
   count toward your limit. If you get receive this exception when running
   a command immediately after creating the organization, wait one hour and
   try again. If after an hour it continues to fail with this error, contact
   AWS Support (https://console.aws.amazon.com/support/home#/).

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
   in this organization, you first must migrate the organization's master
   account to the marketplace that corresponds to the master account's address.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be associated
   with the same marketplace.

   * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
   must first provide contact a valid address and phone number for the master
   account. Then try the operation again.

   * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
   master account must have an associated account in the AWS GovCloud (US-West)
   Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
   in the AWS GovCloud User Guide.

   * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
   with this master account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
   number of policies of a certain type that can be attached to an entity
   at one time.

   * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
   on this resource.

   * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
   with this member account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
   policy from an entity that would cause the entity to have fewer than the
   minimum number of policies of a certain type required.

   * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
   too many levels deep.

   * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
   that requires the organization to be configured to support all features.
   An organization that supports only consolidated billing features can't
   perform this operation.

   * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
   that you can have in an organization.

   * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
   policies that you can have in an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/EnableAWSServiceAccess

func (*Organizations) EnableAWSServiceAccessRequest ¶

func (c *Organizations) EnableAWSServiceAccessRequest(input *EnableAWSServiceAccessInput) (req *request.Request, output *EnableAWSServiceAccessOutput)

EnableAWSServiceAccessRequest generates a "aws/request.Request" representing the client's request for the EnableAWSServiceAccess operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See EnableAWSServiceAccess for more information on using the EnableAWSServiceAccess API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the EnableAWSServiceAccessRequest method.
req, resp := client.EnableAWSServiceAccessRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/EnableAWSServiceAccess

func (*Organizations) EnableAWSServiceAccessWithContext ¶

func (c *Organizations) EnableAWSServiceAccessWithContext(ctx aws.Context, input *EnableAWSServiceAccessInput, opts ...request.Option) (*EnableAWSServiceAccessOutput, error)

EnableAWSServiceAccessWithContext is the same as EnableAWSServiceAccess with the addition of the ability to pass a context and additional request options.

See EnableAWSServiceAccess for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) EnableAllFeatures ¶

func (c *Organizations) EnableAllFeatures(input *EnableAllFeaturesInput) (*EnableAllFeaturesOutput, error)

EnableAllFeatures API operation for AWS Organizations.

Enables all features in an organization. This enables the use of organization policies that can restrict the services and actions that can be called in each account. Until you enable all features, you have access only to consolidated billing, and you can't use any of the advanced account administration features that AWS Organizations supports. For more information, see Enabling All Features in Your Organization (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_org_support-all-features.html) in the AWS Organizations User Guide.

This operation is required only for organizations that were created explicitly with only the consolidated billing features enabled. Calling this operation sends a handshake to every invited account in the organization. The feature set change can be finalized and the additional features enabled only after all administrators in the invited accounts approve the change by accepting the handshake.

After you enable all features, you can separately enable or disable individual policy types in a root using EnablePolicyType and DisablePolicyType. To see the status of policy types in a root, use ListRoots.

After all invited member accounts accept the handshake, you finalize the feature set change by accepting the handshake that contains "Action": "ENABLE_ALL_FEATURES". This completes the change.

After you enable all features in your organization, the master account in the organization can apply policies on all member accounts. These policies can restrict what users and even administrators in those accounts can do. The master account can apply policies that prevent accounts from leaving the organization. Ensure that your account administrators are aware of this.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation EnableAllFeatures for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeHandshakeConstraintViolationException "HandshakeConstraintViolationException"
The requested operation would violate the constraint identified in the reason
code.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. Note that deleted and closed
   accounts still count toward your limit. If you get this exception immediately
   after creating the organization, wait one hour and try again. If after
   an hour it continues to fail with this error, contact AWS Support (https://console.aws.amazon.com/support/home#/).

   * ALREADY_IN_AN_ORGANIZATION: The handshake request is invalid because
   the invited account is already a member of an organization.

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * INVITE_DISABLED_DURING_ENABLE_ALL_FEATURES: You can't issue new invitations
   to join an organization while it's in the process of enabling all features.
   You can resume inviting accounts after you finalize the process when all
   accounts have agreed to the change.

   * ORGANIZATION_ALREADY_HAS_ALL_FEATURES: The handshake request is invalid
   because the organization has already enabled all features.

   * ORGANIZATION_FROM_DIFFERENT_SELLER_OF_RECORD: The request failed because
   the account is from a different marketplace than the accounts in the organization.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be from the same
   marketplace.

   * ORGANIZATION_MEMBERSHIP_CHANGE_RATE_LIMIT_EXCEEDED: You attempted to
   change the membership of an account too quickly after its previous change.

   * PAYMENT_INSTRUMENT_REQUIRED: You can't complete the operation with an
   account that doesn't have a payment instrument, such as a credit card,
   associated with it.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/EnableAllFeatures

svc := organizations.New(session.New())
input := &organizations.EnableAllFeaturesInput{}

result, err := svc.EnableAllFeatures(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeHandshakeConstraintViolationException:
            fmt.Println(organizations.ErrCodeHandshakeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) EnableAllFeaturesRequest ¶

func (c *Organizations) EnableAllFeaturesRequest(input *EnableAllFeaturesInput) (req *request.Request, output *EnableAllFeaturesOutput)

EnableAllFeaturesRequest generates a "aws/request.Request" representing the client's request for the EnableAllFeatures operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See EnableAllFeatures for more information on using the EnableAllFeatures API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the EnableAllFeaturesRequest method.
req, resp := client.EnableAllFeaturesRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/EnableAllFeatures

func (*Organizations) EnableAllFeaturesWithContext ¶

func (c *Organizations) EnableAllFeaturesWithContext(ctx aws.Context, input *EnableAllFeaturesInput, opts ...request.Option) (*EnableAllFeaturesOutput, error)

EnableAllFeaturesWithContext is the same as EnableAllFeatures with the addition of the ability to pass a context and additional request options.

See EnableAllFeatures for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) EnablePolicyType ¶

func (c *Organizations) EnablePolicyType(input *EnablePolicyTypeInput) (*EnablePolicyTypeOutput, error)

EnablePolicyType API operation for AWS Organizations.

Enables a policy type in a root. After you enable a policy type in a root, you can attach policies of that type to the root, any organizational unit (OU), or account in that root. You can undo this by using the DisablePolicyType operation.

This is an asynchronous request that AWS performs in the background. AWS recommends that you first use ListRoots to see the status of policy types for a specified root, and then use this operation.

This operation can be called only from the organization's master account.

You can enable a policy type in a root only if that policy type is available in the organization. To view the status of available policy types in the organization, use DescribeOrganization.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation EnablePolicyType for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeConstraintViolationException "ConstraintViolationException"
Performing this operation violates a minimum or maximum value limit. For
example, attempting to remove the last service control policy (SCP) from
an OU or root, inviting or creating too many accounts to the organization,
or attaching too many policies to an account, OU, or root. This exception
includes a reason that contains additional information about the violated
limit.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
   from the organization that doesn't yet have enough information to exist
   as a standalone account. This account requires you to first agree to the
   AWS Customer Agreement. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
   an account from the organization that doesn't yet have enough information
   to exist as a standalone account. This account requires you to first complete
   phone verification. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
   of accounts that you can create in one day.

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. If you need more accounts,
   contact AWS Support (https://console.aws.amazon.com/support/home#/) to
   request an increase in your limit. Or the number of invitations that you
   tried to send would cause you to exceed the limit of accounts in your
   organization. Send fewer invitations or contact AWS Support to request
   an increase in the number of accounts. Deleted and closed accounts still
   count toward your limit. If you get receive this exception when running
   a command immediately after creating the organization, wait one hour and
   try again. If after an hour it continues to fail with this error, contact
   AWS Support (https://console.aws.amazon.com/support/home#/).

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
   in this organization, you first must migrate the organization's master
   account to the marketplace that corresponds to the master account's address.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be associated
   with the same marketplace.

   * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
   must first provide contact a valid address and phone number for the master
   account. Then try the operation again.

   * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
   master account must have an associated account in the AWS GovCloud (US-West)
   Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
   in the AWS GovCloud User Guide.

   * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
   with this master account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
   number of policies of a certain type that can be attached to an entity
   at one time.

   * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
   on this resource.

   * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
   with this member account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
   policy from an entity that would cause the entity to have fewer than the
   minimum number of policies of a certain type required.

   * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
   too many levels deep.

   * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
   that requires the organization to be configured to support all features.
   An organization that supports only consolidated billing features can't
   perform this operation.

   * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
   that you can have in an organization.

   * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
   policies that you can have in an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodePolicyTypeAlreadyEnabledException "PolicyTypeAlreadyEnabledException"
The specified policy type is already enabled in the specified root.

* ErrCodeRootNotFoundException "RootNotFoundException"
We can't find a root with the RootId that you specified.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

* ErrCodePolicyTypeNotAvailableForOrganizationException "PolicyTypeNotAvailableForOrganizationException"
You can't use the specified policy type with the feature set currently enabled
for this organization. For example, you can enable SCPs only after you enable
all features in the organization. For more information, see Enabling and
Disabling a Policy Type on a Root (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_policies.html#enable_policies_on_root)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/EnablePolicyType

svc := organizations.New(session.New())
input := &organizations.EnablePolicyTypeInput{
    PolicyType: aws.String("SERVICE_CONTROL_POLICY"),
    RootId:     aws.String("r-examplerootid111"),
}

result, err := svc.EnablePolicyType(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeConstraintViolationException:
            fmt.Println(organizations.ErrCodeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodePolicyTypeAlreadyEnabledException:
            fmt.Println(organizations.ErrCodePolicyTypeAlreadyEnabledException, aerr.Error())
        case organizations.ErrCodeRootNotFoundException:
            fmt.Println(organizations.ErrCodeRootNotFoundException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        case organizations.ErrCodePolicyTypeNotAvailableForOrganizationException:
            fmt.Println(organizations.ErrCodePolicyTypeNotAvailableForOrganizationException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) EnablePolicyTypeRequest ¶

func (c *Organizations) EnablePolicyTypeRequest(input *EnablePolicyTypeInput) (req *request.Request, output *EnablePolicyTypeOutput)

EnablePolicyTypeRequest generates a "aws/request.Request" representing the client's request for the EnablePolicyType operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See EnablePolicyType for more information on using the EnablePolicyType API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the EnablePolicyTypeRequest method.
req, resp := client.EnablePolicyTypeRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/EnablePolicyType

func (*Organizations) EnablePolicyTypeWithContext ¶

func (c *Organizations) EnablePolicyTypeWithContext(ctx aws.Context, input *EnablePolicyTypeInput, opts ...request.Option) (*EnablePolicyTypeOutput, error)

EnablePolicyTypeWithContext is the same as EnablePolicyType with the addition of the ability to pass a context and additional request options.

See EnablePolicyType for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) InviteAccountToOrganization ¶

func (c *Organizations) InviteAccountToOrganization(input *InviteAccountToOrganizationInput) (*InviteAccountToOrganizationOutput, error)

InviteAccountToOrganization API operation for AWS Organizations.

Sends an invitation to another account to join your organization as a member account. AWS Organizations sends email on your behalf to the email address that is associated with the other account's owner. The invitation is implemented as a Handshake whose details are in the response.

* You can invite AWS accounts only from the same seller as the master
account. For example, if your organization's master account was created
by Amazon Internet Services Pvt. Ltd (AISPL), an AWS seller in India,
you can invite only other AISPL accounts to your organization. You can't
combine accounts from AISPL and AWS or from any other AWS seller. For
more information, see Consolidated Billing in India (http://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/useconsolidatedbilliing-India.html).

* If you receive an exception that indicates that you exceeded your account
limits for the organization or that the operation failed because your
organization is still initializing, wait one hour and then try again.
If the error persists after an hour, contact AWS Support (https://console.aws.amazon.com/support/home#/).

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation InviteAccountToOrganization for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeAccountOwnerNotVerifiedException "AccountOwnerNotVerifiedException"
You can't invite an existing account to your organization until you verify
that you own the email address associated with the master account. For more
information, see Email Address Verification (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_create.html#about-email-verification)
in the AWS Organizations User Guide.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeHandshakeConstraintViolationException "HandshakeConstraintViolationException"
The requested operation would violate the constraint identified in the reason
code.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. Note that deleted and closed
   accounts still count toward your limit. If you get this exception immediately
   after creating the organization, wait one hour and try again. If after
   an hour it continues to fail with this error, contact AWS Support (https://console.aws.amazon.com/support/home#/).

   * ALREADY_IN_AN_ORGANIZATION: The handshake request is invalid because
   the invited account is already a member of an organization.

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * INVITE_DISABLED_DURING_ENABLE_ALL_FEATURES: You can't issue new invitations
   to join an organization while it's in the process of enabling all features.
   You can resume inviting accounts after you finalize the process when all
   accounts have agreed to the change.

   * ORGANIZATION_ALREADY_HAS_ALL_FEATURES: The handshake request is invalid
   because the organization has already enabled all features.

   * ORGANIZATION_FROM_DIFFERENT_SELLER_OF_RECORD: The request failed because
   the account is from a different marketplace than the accounts in the organization.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be from the same
   marketplace.

   * ORGANIZATION_MEMBERSHIP_CHANGE_RATE_LIMIT_EXCEEDED: You attempted to
   change the membership of an account too quickly after its previous change.

   * PAYMENT_INSTRUMENT_REQUIRED: You can't complete the operation with an
   account that doesn't have a payment instrument, such as a credit card,
   associated with it.

* ErrCodeDuplicateHandshakeException "DuplicateHandshakeException"
A handshake with the same action and target already exists. For example,
if you invited an account to join your organization, the invited account
might already have a pending invitation from this organization. If you intend
to resend an invitation to an account, ensure that existing handshakes that
might be considered duplicates are canceled or declined.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeFinalizingOrganizationException "FinalizingOrganizationException"
AWS Organizations couldn't perform the operation because your organization
hasn't finished initializing. This can take up to an hour. Try again later.
If after one hour you continue to receive this error, contact AWS Support
(https://console.aws.amazon.com/support/home#/).

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/InviteAccountToOrganization

svc := organizations.New(session.New())
input := &organizations.InviteAccountToOrganizationInput{
    Notes: aws.String("This is a request for Juan's account to join Bill's organization"),
    Target: &organizations.HandshakeParty{
        Id:   aws.String("juan@example.com"),
        Type: aws.String("EMAIL"),
    },
}

result, err := svc.InviteAccountToOrganization(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeAccountOwnerNotVerifiedException:
            fmt.Println(organizations.ErrCodeAccountOwnerNotVerifiedException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeHandshakeConstraintViolationException:
            fmt.Println(organizations.ErrCodeHandshakeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeDuplicateHandshakeException:
            fmt.Println(organizations.ErrCodeDuplicateHandshakeException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeFinalizingOrganizationException:
            fmt.Println(organizations.ErrCodeFinalizingOrganizationException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) InviteAccountToOrganizationRequest ¶

func (c *Organizations) InviteAccountToOrganizationRequest(input *InviteAccountToOrganizationInput) (req *request.Request, output *InviteAccountToOrganizationOutput)

InviteAccountToOrganizationRequest generates a "aws/request.Request" representing the client's request for the InviteAccountToOrganization operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See InviteAccountToOrganization for more information on using the InviteAccountToOrganization API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the InviteAccountToOrganizationRequest method.
req, resp := client.InviteAccountToOrganizationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/InviteAccountToOrganization

func (*Organizations) InviteAccountToOrganizationWithContext ¶

func (c *Organizations) InviteAccountToOrganizationWithContext(ctx aws.Context, input *InviteAccountToOrganizationInput, opts ...request.Option) (*InviteAccountToOrganizationOutput, error)

InviteAccountToOrganizationWithContext is the same as InviteAccountToOrganization with the addition of the ability to pass a context and additional request options.

See InviteAccountToOrganization for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) LeaveOrganization ¶

func (c *Organizations) LeaveOrganization(input *LeaveOrganizationInput) (*LeaveOrganizationOutput, error)

LeaveOrganization API operation for AWS Organizations.

Removes a member account from its parent organization. This version of the operation is performed by the account that wants to leave. To remove a member account as a user in the master account, use RemoveAccountFromOrganization instead.

This operation can be called only from a member account in the organization.

* The master account in an organization with all features enabled can
set service control policies (SCPs) that can restrict what administrators
of member accounts can do, including preventing them from successfully
calling LeaveOrganization and leaving the organization.

* You can leave an organization as a member account only if the account
is configured with the information required to operate as a standalone
account. When you create an account in an organization using the AWS Organizations
console, API, or CLI commands, the information required of standalone
accounts is not automatically collected. For each account that you want
to make standalone, you must accept the end user license agreement (EULA),
choose a support plan, provide and verify the required contact information,
and provide a current payment method. AWS uses the payment method to charge
for any billable (not free tier) AWS activity that occurs while the account
isn't attached to an organization. Follow the steps at To leave an organization
when all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
in the AWS Organizations User Guide.

* You can leave an organization only after you enable IAM user access
to billing in your account. For more information, see Activating Access
to the Billing and Cost Management Console (http://docs.aws.amazon.com/awsaccountbilling/latest/aboutv2/grantaccess.html#ControllingAccessWebsite-Activate)
in the AWS Billing and Cost Management User Guide.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation LeaveOrganization for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAccountNotFoundException "AccountNotFoundException"
We can't find an AWS account with the AccountId that you specified, or the
account whose credentials you used to make this request isn't a member of
an organization.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeConstraintViolationException "ConstraintViolationException"
Performing this operation violates a minimum or maximum value limit. For
example, attempting to remove the last service control policy (SCP) from
an OU or root, inviting or creating too many accounts to the organization,
or attaching too many policies to an account, OU, or root. This exception
includes a reason that contains additional information about the violated
limit.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
   from the organization that doesn't yet have enough information to exist
   as a standalone account. This account requires you to first agree to the
   AWS Customer Agreement. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
   an account from the organization that doesn't yet have enough information
   to exist as a standalone account. This account requires you to first complete
   phone verification. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
   of accounts that you can create in one day.

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. If you need more accounts,
   contact AWS Support (https://console.aws.amazon.com/support/home#/) to
   request an increase in your limit. Or the number of invitations that you
   tried to send would cause you to exceed the limit of accounts in your
   organization. Send fewer invitations or contact AWS Support to request
   an increase in the number of accounts. Deleted and closed accounts still
   count toward your limit. If you get receive this exception when running
   a command immediately after creating the organization, wait one hour and
   try again. If after an hour it continues to fail with this error, contact
   AWS Support (https://console.aws.amazon.com/support/home#/).

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
   in this organization, you first must migrate the organization's master
   account to the marketplace that corresponds to the master account's address.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be associated
   with the same marketplace.

   * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
   must first provide contact a valid address and phone number for the master
   account. Then try the operation again.

   * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
   master account must have an associated account in the AWS GovCloud (US-West)
   Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
   in the AWS GovCloud User Guide.

   * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
   with this master account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
   number of policies of a certain type that can be attached to an entity
   at one time.

   * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
   on this resource.

   * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
   with this member account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
   policy from an entity that would cause the entity to have fewer than the
   minimum number of policies of a certain type required.

   * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
   too many levels deep.

   * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
   that requires the organization to be configured to support all features.
   An organization that supports only consolidated billing features can't
   perform this operation.

   * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
   that you can have in an organization.

   * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
   policies that you can have in an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeMasterCannotLeaveOrganizationException "MasterCannotLeaveOrganizationException"
You can't remove a master account from an organization. If you want the master
account to become a member account in another organization, you must first
delete the current organization of the master account.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/LeaveOrganization

svc := organizations.New(session.New())
input := &organizations.LeaveOrganizationInput{}

result, err := svc.LeaveOrganization(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAccountNotFoundException:
            fmt.Println(organizations.ErrCodeAccountNotFoundException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeConstraintViolationException:
            fmt.Println(organizations.ErrCodeConstraintViolationException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeMasterCannotLeaveOrganizationException:
            fmt.Println(organizations.ErrCodeMasterCannotLeaveOrganizationException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) LeaveOrganizationRequest ¶

func (c *Organizations) LeaveOrganizationRequest(input *LeaveOrganizationInput) (req *request.Request, output *LeaveOrganizationOutput)

LeaveOrganizationRequest generates a "aws/request.Request" representing the client's request for the LeaveOrganization operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See LeaveOrganization for more information on using the LeaveOrganization API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the LeaveOrganizationRequest method.
req, resp := client.LeaveOrganizationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/LeaveOrganization

func (*Organizations) LeaveOrganizationWithContext ¶

func (c *Organizations) LeaveOrganizationWithContext(ctx aws.Context, input *LeaveOrganizationInput, opts ...request.Option) (*LeaveOrganizationOutput, error)

LeaveOrganizationWithContext is the same as LeaveOrganization with the addition of the ability to pass a context and additional request options.

See LeaveOrganization for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) ListAWSServiceAccessForOrganization ¶

func (c *Organizations) ListAWSServiceAccessForOrganization(input *ListAWSServiceAccessForOrganizationInput) (*ListAWSServiceAccessForOrganizationOutput, error)

ListAWSServiceAccessForOrganization API operation for AWS Organizations.

Returns a list of the AWS services that you enabled to integrate with your organization. After a service on this list creates the resources that it requires for the integration, it can perform operations on your organization and its accounts.

For more information about integrating other services with AWS Organizations, including the list of services that currently work with Organizations, see Integrating AWS Organizations with Other AWS Services (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_integrate_services.html) in the AWS Organizations User Guide.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation ListAWSServiceAccessForOrganization for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConstraintViolationException "ConstraintViolationException"
Performing this operation violates a minimum or maximum value limit. For
example, attempting to remove the last service control policy (SCP) from
an OU or root, inviting or creating too many accounts to the organization,
or attaching too many policies to an account, OU, or root. This exception
includes a reason that contains additional information about the violated
limit.

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_EULA: You attempted to remove an account
   from the organization that doesn't yet have enough information to exist
   as a standalone account. This account requires you to first agree to the
   AWS Customer Agreement. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CANNOT_LEAVE_WITHOUT_PHONE_VERIFICATION: You attempted to remove
   an account from the organization that doesn't yet have enough information
   to exist as a standalone account. This account requires you to first complete
   phone verification. Follow the steps at To leave an organization when
   all required account information has not yet been provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * ACCOUNT_CREATION_RATE_LIMIT_EXCEEDED: You attempted to exceed the number
   of accounts that you can create in one day.

   * ACCOUNT_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the limit on
   the number of accounts in an organization. If you need more accounts,
   contact AWS Support (https://console.aws.amazon.com/support/home#/) to
   request an increase in your limit. Or the number of invitations that you
   tried to send would cause you to exceed the limit of accounts in your
   organization. Send fewer invitations or contact AWS Support to request
   an increase in the number of accounts. Deleted and closed accounts still
   count toward your limit. If you get receive this exception when running
   a command immediately after creating the organization, wait one hour and
   try again. If after an hour it continues to fail with this error, contact
   AWS Support (https://console.aws.amazon.com/support/home#/).

   * HANDSHAKE_RATE_LIMIT_EXCEEDED: You attempted to exceed the number of
   handshakes that you can send in one day.

   * MASTER_ACCOUNT_ADDRESS_DOES_NOT_MATCH_MARKETPLACE: To create an account
   in this organization, you first must migrate the organization's master
   account to the marketplace that corresponds to the master account's address.
   For example, accounts with India addresses must be associated with the
   AISPL marketplace. All accounts in an organization must be associated
   with the same marketplace.

   * MASTER_ACCOUNT_MISSING_CONTACT_INFO: To complete this operation, you
   must first provide contact a valid address and phone number for the master
   account. Then try the operation again.

   * MASTER_ACCOUNT_NOT_GOVCLOUD_ENABLED: To complete this operation, the
   master account must have an associated account in the AWS GovCloud (US-West)
   Region. For more information, see AWS Organizations (http://docs.aws.amazon.com/govcloud-us/latest/UserGuide/govcloud-organizations.html)
   in the AWS GovCloud User Guide.

   * MASTER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To create an organization
   with this master account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MAX_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to exceed the
   number of policies of a certain type that can be attached to an entity
   at one time.

   * MAX_TAG_LIMIT_EXCEEDED: You have exceeded the number of tags allowed
   on this resource.

   * MEMBER_ACCOUNT_PAYMENT_INSTRUMENT_REQUIRED: To complete this operation
   with this member account, you first must associate a valid payment instrument,
   such as a credit card, with the account. Follow the steps at To leave
   an organization when all required account information has not yet been
   provided (http://docs.aws.amazon.com/organizations/latest/userguide/orgs_manage_accounts_remove.html#leave-without-all-info)
   in the AWS Organizations User Guide.

   * MIN_POLICY_TYPE_ATTACHMENT_LIMIT_EXCEEDED: You attempted to detach a
   policy from an entity that would cause the entity to have fewer than the
   minimum number of policies of a certain type required.

   * OU_DEPTH_LIMIT_EXCEEDED: You attempted to create an OU tree that is
   too many levels deep.

   * ORGANIZATION_NOT_IN_ALL_FEATURES_MODE: You attempted to perform an operation
   that requires the organization to be configured to support all features.
   An organization that supports only consolidated billing features can't
   perform this operation.

   * OU_NUMBER_LIMIT_EXCEEDED: You attempted to exceed the number of OUs
   that you can have in an organization.

   * POLICY_NUMBER_LIMIT_EXCEEDED. You attempted to exceed the number of
   policies that you can have in an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/ListAWSServiceAccessForOrganization

func (*Organizations) ListAWSServiceAccessForOrganizationPages ¶

func (c *Organizations) ListAWSServiceAccessForOrganizationPages(input *ListAWSServiceAccessForOrganizationInput, fn func(*ListAWSServiceAccessForOrganizationOutput, bool) bool) error

ListAWSServiceAccessForOrganizationPages iterates over the pages of a ListAWSServiceAccessForOrganization operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListAWSServiceAccessForOrganization method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListAWSServiceAccessForOrganization operation.
pageNum := 0
err := client.ListAWSServiceAccessForOrganizationPages(params,
    func(page *organizations.ListAWSServiceAccessForOrganizationOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Organizations) ListAWSServiceAccessForOrganizationPagesWithContext ¶

func (c *Organizations) ListAWSServiceAccessForOrganizationPagesWithContext(ctx aws.Context, input *ListAWSServiceAccessForOrganizationInput, fn func(*ListAWSServiceAccessForOrganizationOutput, bool) bool, opts ...request.Option) error

ListAWSServiceAccessForOrganizationPagesWithContext same as ListAWSServiceAccessForOrganizationPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) ListAWSServiceAccessForOrganizationRequest ¶

func (c *Organizations) ListAWSServiceAccessForOrganizationRequest(input *ListAWSServiceAccessForOrganizationInput) (req *request.Request, output *ListAWSServiceAccessForOrganizationOutput)

ListAWSServiceAccessForOrganizationRequest generates a "aws/request.Request" representing the client's request for the ListAWSServiceAccessForOrganization operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListAWSServiceAccessForOrganization for more information on using the ListAWSServiceAccessForOrganization API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListAWSServiceAccessForOrganizationRequest method.
req, resp := client.ListAWSServiceAccessForOrganizationRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/ListAWSServiceAccessForOrganization

func (*Organizations) ListAWSServiceAccessForOrganizationWithContext ¶

func (c *Organizations) ListAWSServiceAccessForOrganizationWithContext(ctx aws.Context, input *ListAWSServiceAccessForOrganizationInput, opts ...request.Option) (*ListAWSServiceAccessForOrganizationOutput, error)

ListAWSServiceAccessForOrganizationWithContext is the same as ListAWSServiceAccessForOrganization with the addition of the ability to pass a context and additional request options.

See ListAWSServiceAccessForOrganization for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) ListAccounts ¶

func (c *Organizations) ListAccounts(input *ListAccountsInput) (*ListAccountsOutput, error)

ListAccounts API operation for AWS Organizations.

Lists all the accounts in the organization. To request only the accounts in a specified root or organizational unit (OU), use the ListAccountsForParent operation instead.

Always check the NextToken response parameter for a null value when calling a List* operation. These operations can occasionally return an empty set of results even when there are more results available. The NextToken response parameter value is null only when there are no more results to display.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation ListAccounts for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/ListAccounts

svc := organizations.New(session.New())
input := &organizations.ListAccountsInput{}

result, err := svc.ListAccounts(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) ListAccountsForParent ¶

func (c *Organizations) ListAccountsForParent(input *ListAccountsForParentInput) (*ListAccountsForParentOutput, error)

ListAccountsForParent API operation for AWS Organizations.

Lists the accounts in an organization that are contained by the specified target root or organizational unit (OU). If you specify the root, you get a list of all the accounts that aren't in any OU. If you specify an OU, you get a list of all the accounts in only that OU and not in any child OUs. To get a list of all accounts in the organization, use the ListAccounts operation.

Always check the NextToken response parameter for a null value when calling a List* operation. These operations can occasionally return an empty set of results even when there are more results available. The NextToken response parameter value is null only when there are no more results to display.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation ListAccountsForParent for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeParentNotFoundException "ParentNotFoundException"
We can't find a root or OU with the ParentId that you specified.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/ListAccountsForParent

svc := organizations.New(session.New())
input := &organizations.ListAccountsForParentInput{
    ParentId: aws.String("ou-examplerootid111-exampleouid111"),
}

result, err := svc.ListAccountsForParent(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeParentNotFoundException:
            fmt.Println(organizations.ErrCodeParentNotFoundException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) ListAccountsForParentPages ¶

func (c *Organizations) ListAccountsForParentPages(input *ListAccountsForParentInput, fn func(*ListAccountsForParentOutput, bool) bool) error

ListAccountsForParentPages iterates over the pages of a ListAccountsForParent operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListAccountsForParent method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListAccountsForParent operation.
pageNum := 0
err := client.ListAccountsForParentPages(params,
    func(page *organizations.ListAccountsForParentOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Organizations) ListAccountsForParentPagesWithContext ¶

func (c *Organizations) ListAccountsForParentPagesWithContext(ctx aws.Context, input *ListAccountsForParentInput, fn func(*ListAccountsForParentOutput, bool) bool, opts ...request.Option) error

ListAccountsForParentPagesWithContext same as ListAccountsForParentPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) ListAccountsForParentRequest ¶

func (c *Organizations) ListAccountsForParentRequest(input *ListAccountsForParentInput) (req *request.Request, output *ListAccountsForParentOutput)

ListAccountsForParentRequest generates a "aws/request.Request" representing the client's request for the ListAccountsForParent operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListAccountsForParent for more information on using the ListAccountsForParent API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListAccountsForParentRequest method.
req, resp := client.ListAccountsForParentRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/ListAccountsForParent

func (*Organizations) ListAccountsForParentWithContext ¶

func (c *Organizations) ListAccountsForParentWithContext(ctx aws.Context, input *ListAccountsForParentInput, opts ...request.Option) (*ListAccountsForParentOutput, error)

ListAccountsForParentWithContext is the same as ListAccountsForParent with the addition of the ability to pass a context and additional request options.

See ListAccountsForParent for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) ListAccountsPages ¶

func (c *Organizations) ListAccountsPages(input *ListAccountsInput, fn func(*ListAccountsOutput, bool) bool) error

ListAccountsPages iterates over the pages of a ListAccounts operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListAccounts method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListAccounts operation.
pageNum := 0
err := client.ListAccountsPages(params,
    func(page *organizations.ListAccountsOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Organizations) ListAccountsPagesWithContext ¶

func (c *Organizations) ListAccountsPagesWithContext(ctx aws.Context, input *ListAccountsInput, fn func(*ListAccountsOutput, bool) bool, opts ...request.Option) error

ListAccountsPagesWithContext same as ListAccountsPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) ListAccountsRequest ¶

func (c *Organizations) ListAccountsRequest(input *ListAccountsInput) (req *request.Request, output *ListAccountsOutput)

ListAccountsRequest generates a "aws/request.Request" representing the client's request for the ListAccounts operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListAccounts for more information on using the ListAccounts API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListAccountsRequest method.
req, resp := client.ListAccountsRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/ListAccounts

func (*Organizations) ListAccountsWithContext ¶

func (c *Organizations) ListAccountsWithContext(ctx aws.Context, input *ListAccountsInput, opts ...request.Option) (*ListAccountsOutput, error)

ListAccountsWithContext is the same as ListAccounts with the addition of the ability to pass a context and additional request options.

See ListAccounts for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) ListChildren ¶

func (c *Organizations) ListChildren(input *ListChildrenInput) (*ListChildrenOutput, error)

ListChildren API operation for AWS Organizations.

Lists all of the organizational units (OUs) or accounts that are contained in the specified parent OU or root. This operation, along with ListParents enables you to traverse the tree structure that makes up this root.

Always check the NextToken response parameter for a null value when calling a List* operation. These operations can occasionally return an empty set of results even when there are more results available. The NextToken response parameter value is null only when there are no more results to display.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation ListChildren for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeParentNotFoundException "ParentNotFoundException"
We can't find a root or OU with the ParentId that you specified.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/ListChildren

svc := organizations.New(session.New())
input := &organizations.ListChildrenInput{
    ChildType: aws.String("ORGANIZATIONAL_UNIT"),
    ParentId:  aws.String("ou-examplerootid111-exampleouid111"),
}

result, err := svc.ListChildren(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeParentNotFoundException:
            fmt.Println(organizations.ErrCodeParentNotFoundException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) ListChildrenPages ¶

func (c *Organizations) ListChildrenPages(input *ListChildrenInput, fn func(*ListChildrenOutput, bool) bool) error

ListChildrenPages iterates over the pages of a ListChildren operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListChildren method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListChildren operation.
pageNum := 0
err := client.ListChildrenPages(params,
    func(page *organizations.ListChildrenOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Organizations) ListChildrenPagesWithContext ¶

func (c *Organizations) ListChildrenPagesWithContext(ctx aws.Context, input *ListChildrenInput, fn func(*ListChildrenOutput, bool) bool, opts ...request.Option) error

ListChildrenPagesWithContext same as ListChildrenPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) ListChildrenRequest ¶

func (c *Organizations) ListChildrenRequest(input *ListChildrenInput) (req *request.Request, output *ListChildrenOutput)

ListChildrenRequest generates a "aws/request.Request" representing the client's request for the ListChildren operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListChildren for more information on using the ListChildren API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListChildrenRequest method.
req, resp := client.ListChildrenRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/ListChildren

func (*Organizations) ListChildrenWithContext ¶

func (c *Organizations) ListChildrenWithContext(ctx aws.Context, input *ListChildrenInput, opts ...request.Option) (*ListChildrenOutput, error)

ListChildrenWithContext is the same as ListChildren with the addition of the ability to pass a context and additional request options.

See ListChildren for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) ListCreateAccountStatus ¶

func (c *Organizations) ListCreateAccountStatus(input *ListCreateAccountStatusInput) (*ListCreateAccountStatusOutput, error)

ListCreateAccountStatus API operation for AWS Organizations.

Lists the account creation requests that match the specified status that is currently being tracked for the organization.

Always check the NextToken response parameter for a null value when calling a List* operation. These operations can occasionally return an empty set of results even when there are more results available. The NextToken response parameter value is null only when there are no more results to display.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation ListCreateAccountStatus for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

* ErrCodeUnsupportedAPIEndpointException "UnsupportedAPIEndpointException"
This action isn't available in the current Region.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/ListCreateAccountStatus

svc := organizations.New(session.New())
input := &organizations.ListCreateAccountStatusInput{
    States: []*string{
        aws.String("SUCCEEDED"),
    },
}

result, err := svc.ListCreateAccountStatus(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        case organizations.ErrCodeUnsupportedAPIEndpointException:
            fmt.Println(organizations.ErrCodeUnsupportedAPIEndpointException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

svc := organizations.New(session.New())
input := &organizations.ListCreateAccountStatusInput{
    States: []*string{
        aws.String("IN_PROGRESS"),
    },
}

result, err := svc.ListCreateAccountStatus(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeAWSOrganizationsNotInUseException:
            fmt.Println(organizations.ErrCodeAWSOrganizationsNotInUseException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        case organizations.ErrCodeUnsupportedAPIEndpointException:
            fmt.Println(organizations.ErrCodeUnsupportedAPIEndpointException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) ListCreateAccountStatusPages ¶

func (c *Organizations) ListCreateAccountStatusPages(input *ListCreateAccountStatusInput, fn func(*ListCreateAccountStatusOutput, bool) bool) error

ListCreateAccountStatusPages iterates over the pages of a ListCreateAccountStatus operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListCreateAccountStatus method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListCreateAccountStatus operation.
pageNum := 0
err := client.ListCreateAccountStatusPages(params,
    func(page *organizations.ListCreateAccountStatusOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Organizations) ListCreateAccountStatusPagesWithContext ¶

func (c *Organizations) ListCreateAccountStatusPagesWithContext(ctx aws.Context, input *ListCreateAccountStatusInput, fn func(*ListCreateAccountStatusOutput, bool) bool, opts ...request.Option) error

ListCreateAccountStatusPagesWithContext same as ListCreateAccountStatusPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) ListCreateAccountStatusRequest ¶

func (c *Organizations) ListCreateAccountStatusRequest(input *ListCreateAccountStatusInput) (req *request.Request, output *ListCreateAccountStatusOutput)

ListCreateAccountStatusRequest generates a "aws/request.Request" representing the client's request for the ListCreateAccountStatus operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListCreateAccountStatus for more information on using the ListCreateAccountStatus API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListCreateAccountStatusRequest method.
req, resp := client.ListCreateAccountStatusRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/ListCreateAccountStatus

func (*Organizations) ListCreateAccountStatusWithContext ¶

func (c *Organizations) ListCreateAccountStatusWithContext(ctx aws.Context, input *ListCreateAccountStatusInput, opts ...request.Option) (*ListCreateAccountStatusOutput, error)

ListCreateAccountStatusWithContext is the same as ListCreateAccountStatus with the addition of the ability to pass a context and additional request options.

See ListCreateAccountStatus for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) ListHandshakesForAccount ¶

func (c *Organizations) ListHandshakesForAccount(input *ListHandshakesForAccountInput) (*ListHandshakesForAccountOutput, error)

ListHandshakesForAccount API operation for AWS Organizations.

Lists the current handshakes that are associated with the account of the requesting user.

Handshakes that are ACCEPTED, DECLINED, or CANCELED appear in the results of this API for only 30 days after changing to that state. After that, they're deleted and no longer accessible.

Always check the NextToken response parameter for a null value when calling a List* operation. These operations can occasionally return an empty set of results even when there are more results available. The NextToken response parameter value is null only when there are no more results to display.

This operation can be called from any account in the organization.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation ListHandshakesForAccount for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/ListHandshakesForAccount

svc := organizations.New(session.New())
input := &organizations.ListHandshakesForAccountInput{}

result, err := svc.ListHandshakesForAccount(input)
if err != nil {
    if aerr, ok := err.(awserr.Error); ok {
        switch aerr.Code() {
        case organizations.ErrCodeAccessDeniedException:
            fmt.Println(organizations.ErrCodeAccessDeniedException, aerr.Error())
        case organizations.ErrCodeConcurrentModificationException:
            fmt.Println(organizations.ErrCodeConcurrentModificationException, aerr.Error())
        case organizations.ErrCodeInvalidInputException:
            fmt.Println(organizations.ErrCodeInvalidInputException, aerr.Error())
        case organizations.ErrCodeServiceException:
            fmt.Println(organizations.ErrCodeServiceException, aerr.Error())
        case organizations.ErrCodeTooManyRequestsException:
            fmt.Println(organizations.ErrCodeTooManyRequestsException, aerr.Error())
        default:
            fmt.Println(aerr.Error())
        }
    } else {
        // Print the error, cast err to awserr.Error to get the Code and
        // Message from an error.
        fmt.Println(err.Error())
    }
    return
}

fmt.Println(result)

func (*Organizations) ListHandshakesForAccountPages ¶

func (c *Organizations) ListHandshakesForAccountPages(input *ListHandshakesForAccountInput, fn func(*ListHandshakesForAccountOutput, bool) bool) error

ListHandshakesForAccountPages iterates over the pages of a ListHandshakesForAccount operation, calling the "fn" function with the response data for each page. To stop iterating, return false from the fn function.

See ListHandshakesForAccount method for more information on how to use this operation.

Note: This operation can generate multiple requests to a service.

// Example iterating over at most 3 pages of a ListHandshakesForAccount operation.
pageNum := 0
err := client.ListHandshakesForAccountPages(params,
    func(page *organizations.ListHandshakesForAccountOutput, lastPage bool) bool {
        pageNum++
        fmt.Println(page)
        return pageNum <= 3
    })

func (*Organizations) ListHandshakesForAccountPagesWithContext ¶

func (c *Organizations) ListHandshakesForAccountPagesWithContext(ctx aws.Context, input *ListHandshakesForAccountInput, fn func(*ListHandshakesForAccountOutput, bool) bool, opts ...request.Option) error

ListHandshakesForAccountPagesWithContext same as ListHandshakesForAccountPages except it takes a Context and allows setting request options on the pages.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) ListHandshakesForAccountRequest ¶

func (c *Organizations) ListHandshakesForAccountRequest(input *ListHandshakesForAccountInput) (req *request.Request, output *ListHandshakesForAccountOutput)

ListHandshakesForAccountRequest generates a "aws/request.Request" representing the client's request for the ListHandshakesForAccount operation. The "output" return value will be populated with the request's response once the request completes successfully.

Use "Send" method on the returned Request to send the API call to the service. the "output" return value is not valid until after Send returns without error.

See ListHandshakesForAccount for more information on using the ListHandshakesForAccount API call, and error handling.

This method is useful when you want to inject custom logic or configuration into the SDK's request lifecycle. Such as custom headers, or retry logic.

// Example sending a request using the ListHandshakesForAccountRequest method.
req, resp := client.ListHandshakesForAccountRequest(params)

err := req.Send()
if err == nil { // resp is now filled
    fmt.Println(resp)
}

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/ListHandshakesForAccount

func (*Organizations) ListHandshakesForAccountWithContext ¶

func (c *Organizations) ListHandshakesForAccountWithContext(ctx aws.Context, input *ListHandshakesForAccountInput, opts ...request.Option) (*ListHandshakesForAccountOutput, error)

ListHandshakesForAccountWithContext is the same as ListHandshakesForAccount with the addition of the ability to pass a context and additional request options.

See ListHandshakesForAccount for details on how to use this API operation.

The context must be non-nil and will be used for request cancellation. If the context is nil a panic will occur. In the future the SDK may create sub-contexts for http.Requests. See https://golang.org/pkg/context/ for more information on using Contexts.

func (*Organizations) ListHandshakesForOrganization ¶

func (c *Organizations) ListHandshakesForOrganization(input *ListHandshakesForOrganizationInput) (*ListHandshakesForOrganizationOutput, error)

ListHandshakesForOrganization API operation for AWS Organizations.

Lists the handshakes that are associated with the organization that the requesting user is part of. The ListHandshakesForOrganization operation returns a list of handshake structures. Each structure contains details and status about a handshake.

Handshakes that are ACCEPTED, DECLINED, or CANCELED appear in the results of this API for only 30 days after changing to that state. After that, they're deleted and no longer accessible.

Always check the NextToken response parameter for a null value when calling a List* operation. These operations can occasionally return an empty set of results even when there are more results available. The NextToken response parameter value is null only when there are no more results to display.

This operation can be called only from the organization's master account.

Returns awserr.Error for service API and SDK errors. Use runtime type assertions with awserr.Error's Code and Message methods to get detailed information about the error.

See the AWS API reference guide for AWS Organizations's API operation ListHandshakesForOrganization for usage and error information.

Returned Error Codes:

* ErrCodeAccessDeniedException "AccessDeniedException"
You don't have permissions to perform the requested operation. The user or
role that is making the request must have at least one IAM permissions policy
attached that grants the required permissions. For more information, see
Access Management (https://docs.aws.amazon.com/IAM/latest/UserGuide/access.html)
in the IAM User Guide.

* ErrCodeAWSOrganizationsNotInUseException "AWSOrganizationsNotInUseException"
Your account isn't a member of an organization. To make this request, you
must use the credentials of an account that belongs to an organization.

* ErrCodeConcurrentModificationException "ConcurrentModificationException"
The target of the operation is currently being modified by a different request.
Try again later.

* ErrCodeInvalidInputException "InvalidInputException"
The requested operation failed because you provided invalid values for one
or more of the request parameters. This exception includes a reason that
contains additional information about the violated limit:

Some of the reasons in the following list might not be applicable to this
specific API or operation:

   * IMMUTABLE_POLICY: You specified a policy that is managed by AWS and
   can't be modified.

   * INPUT_REQUIRED: You must include a value for all required parameters.

   * INVALID_ENUM: You specified an invalid value.

   * INVALID_FULL_NAME_TARGET: You specified a full name that contains invalid
   characters.

   * INVALID_LIST_MEMBER: You provided a list to a parameter that contains
   at least one invalid value.

   * INVALID_PAGINATION_TOKEN: Get the value for the NextToken parameter
   from the response to a previous call of the operation.

   * INVALID_PARTY_TYPE_TARGET: You specified the wrong type of entity (account,
   organization, or email) as a party.

   * INVALID_PATTERN: You provided a value that doesn't match the required
   pattern.

   * INVALID_PATTERN_TARGET_ID: You specified a policy target ID that doesn't
   match the required pattern.

   * INVALID_ROLE_NAME: You provided a role name that isn't valid. A role
   name can't begin with the reserved prefix AWSServiceRoleFor.

   * INVALID_SYNTAX_ORGANIZATION_ARN: You specified an invalid Amazon Resource
   Name (ARN) for the organization.

   * INVALID_SYNTAX_POLICY_ID: You specified an invalid policy ID.

   * INVALID_SYSTEM_TAGS_PARAMETER: You specified a tag key that is a system
   tag. You can’t add, edit, or delete system tag keys because they're
   reserved for AWS use. System tags don’t count against your tags per
   resource limit.

   * MAX_FILTER_LIMIT_EXCEEDED: You can specify only one filter parameter
   for the operation.

   * MAX_LENGTH_EXCEEDED: You provided a string parameter that is longer
   than allowed.

   * MAX_VALUE_EXCEEDED: You provided a numeric parameter that has a larger
   value than allowed.

   * MIN_LENGTH_EXCEEDED: You provided a string parameter that is shorter
   than allowed.

   * MIN_VALUE_EXCEEDED: You provided a numeric parameter that has a smaller
   value than allowed.

   * MOVING_ACCOUNT_BETWEEN_DIFFERENT_ROOTS: You can move an account only
   between entities in the same root.

* ErrCodeServiceException "ServiceException"
AWS Organizations can't complete your request because of an internal service
error. Try again later.

* ErrCodeTooManyRequestsException "TooManyRequestsException"
You have sent too many requests in too short a period of time. The limit
helps protect against denial-of-service attacks. Try again later.

For information on limits that affect AWS Organizations, see Limits of AWS
Organizations (https://docs.aws.amazon.com/organizations/latest/userguide/orgs_reference_limits.html)
in the AWS Organizations User Guide.

See also, https://docs.aws.amazon.com/goto/WebAPI/organizations-2016-11-28/ListHandshakesForOrganization