AWS SDK for PHP
Developer Guide

Amazon S3 Stream Wrapper with AWS SDK for PHP Version 3

The Amazon S3 stream wrapper enables you to store and retrieve data from Amazon S3 using built-in PHP functions, such as file_get_contents, fopen, copy, rename, unlink, mkdir, and rmdir.

You need to register the Amazon S3 stream wrapper to use it.

$client = new Aws\S3\S3Client([/** options **/]); // Register the stream wrapper from an S3Client object $client->registerStreamWrapper();

This enables you to access buckets and objects stored in Amazon S3 using the s3:// protocol. The Amazon S3 stream wrapper accepts strings that contain a bucket name followed by a forward slash and an optional object key or prefix: s3://<bucket>[/<key-or-prefix>].

Note

The stream wrapper is designed for working with objects and buckets on which you have at least read permission. This means that your user should have permission to execute ListBucket on any buckets and GetObject on any object with which the user needs to interact. For use cases where you don't have this permission level, we recommended that you use S3 client operations directly.

Downloading Data

You can grab the contents of an object by using file_get_contents. However, be careful with this function; it loads the entire contents of the object into memory.

// Download the body of the "key" object in the "bucket" bucket $data = file_get_contents('s3://bucket/key');

Use fopen() when working with larger files or if you need to stream data from Amazon S3.

// Open a stream in read-only mode if ($stream = fopen('s3://bucket/key', 'r')) { // While the stream is still open while (!feof($stream)) { // Read 1,024 bytes from the stream echo fread($stream, 1024); } // Be sure to close the stream resource when you're done with it fclose($stream); }

Note

File write errors are only returned when a call to fflush is made. These errors are not returned when an unflushed fclose is called. The return value for fclose will be true if it closes the stream, regardless of any errors in response to its internal fflush. These errors are also not returned when calling file_put_contents because of how PHP implements it.

Opening Seekable Streams

Streams opened in "r" mode only allow data to be read from the stream, and are not seekable by default. This is so that data can be downloaded from Amazon S3 in a truly streaming manner, where previously read bytes do not need to be buffered into memory. If you need a stream to be seekable, you can pass seekable into the stream context options of a function.

$context = stream_context_create([ 's3' => ['seekable' => true] ]); if ($stream = fopen('s3://bucket/key', 'r', false, $context)) { // Read bytes from the stream fread($stream, 1024); // Seek back to the beginning of the stream fseek($steam, 0); // Read the same bytes that were previously read fread($stream, 1024); fclose($stream); }

Opening seekable streams enables you to seek bytes that were previously read. You can't skip ahead to bytes that have not yet been read from the remote server. To allow previously read data to recalled, data is buffered in a PHP temp stream using a stream decorator. When the amount of cached data exceeds 2 MB, the data in the temp stream transfers from memory to disk. Keep this in mind when downloading large files from Amazon S3 using the seekable stream context setting.

Uploading Data

You can upload data to Amazon S3 using file_put_contents().

file_put_contents('s3://bucket/key', 'Hello!');

You can upload larger files by streaming data using fopen() and a "w", "x", or "a" stream access mode. The Amazon S3 stream wrapper does not support simultaneous read and write streams (e.g. "r+", "w+", etc). This is because the HTTP protocol doesn't allow simultaneous reading and writing.

$stream = fopen('s3://bucket/key', 'w'); fwrite($stream, 'Hello!'); fclose($stream);

Note

Amazon S3 requires a Content-Length header to be specified before the payload of a request is sent. Therefore, the data to be uploaded in a PutObject operation is internally buffered using a PHP temp stream until the stream is flushed or closed.

Note

File write errors are returned only when a call to fflush is made. These errors are not returned when an unflushed fclose is called. The return value for fclose will be true if it closes the stream, regardless of any errors in response to its internal fflush. These errors are also not returned when calling file_put_contents because of how PHP implements it.

fopen Modes

PHP's fopen() function requires that you specify a $mode option. The mode option specifies whether data can be read or written to a stream, and whether the file must exist when opening a stream. The Amazon S3 stream wrapper supports the following modes.

r

A read-only stream where the file must already exist.

w

A write-only stream. If the file already exists, it will be overwritten.

a

A write-only stream. If the file already exists, it will be downloaded to a temporary stream and any writes to the stream will be appended to any previously uploaded data.

x

A write-only stream. An error is raised if the file does not already exist.

Other Object Functions

Stream wrappers allow many different built-in PHP functions to work with a custom system such as Amazon S3. Here are some of the functions that the Amazon S3 stream wrapper enables you to perform with objects stored in Amazon S3.

Stream wrappers allow many different built-in PHP functions to work with a custom system such as Amazon S3. Here are some of the functions that the Amazon S3 stream wrapper enables you to perform with objects stored in Amazon S3.

unlink()

Delete an object from a bucket.

// Delete an object from a bucket unlink('s3://bucket/key');

You can pass in any options available to the DeleteObject operation to modify how the object is deleted (e.g. specifying a specific object version).

// Delete a specific version of an object from a bucket unlink('s3://bucket/key', stream_context_create([ 's3' => ['VersionId' => '123'] ]);

filesize()

Get the size of an object.

// Get the Content-Length of an object $size = filesize('s3://bucket/key', );

is_file()

Checks if a URL is a file.

if (is_file('s3://bucket/key')) { echo 'It is a file!'; }

file_exists()

Checks if an object exists.

if (file_exists('s3://bucket/key')) { echo 'It exists!'; }

filetype()

Checks if a URL maps to a file or bucket (dir).

file()

Load the contents of an object in an array of lines. You can pass in any options available to the GetObject operation to modify how the file is downloaded.

filemtime()

Get the last modified date of an object.

rename()

Rename an object by copying the object then deleting the original. You can pass in options available to the CopyObject and DeleteObject operations to the stream context parameters to modify how the object is copied and deleted.

Note

Although copy will generally work with the Amazon S3 stream wrapper, some errors might not be properly reported due to the internals of the copy function in PHP. We recommend that you use an instance of AwsS3ObjectCopier instead.

Working with Buckets

You can modify and browse Amazon S3 buckets similarly to how PHP allows the modification and traversal of directories on your file system.

Here's an example of creating a bucket.

mkdir('s3://bucket');

You can pass in stream context options to the mkdir() method to modify how the bucket is created using the parameters available to the CreateBucket operation.

// Create a bucket in the EU (Ireland) Region mkdir('s3://bucket', stream_context_create([ 's3' => ['LocationConstraint' => 'eu-west-1'] ]);

You can delete buckets using the rmdir() function.

// Delete a bucket rmdir('s3://bucket');

Note

A bucket can only be deleted if it is empty.

Listing the Contents of a Bucket

You can use the opendir(), readdir(), rewinddir(), and closedir() PHP functions with the Amazon S3 stream wrapper to traverse the contents of a bucket. You can pass in parameters available to the ListObjects operation as custom stream context options to the opendir() function to modify how objects are listed.

$dir = "s3://bucket/"; if (is_dir($dir) && ($dh = opendir($dir))) { while (($file = readdir($dh)) !## false) { echo "filename: {$file} : filetype: " . filetype($dir . $file) . "\n"; } closedir($dh); }

You can recursively list each object and prefix in a bucket using PHP's RecursiveDirectoryIterator.

$dir = 's3://bucket'; $iterator = new RecursiveIteratorIterator(new RecursiveDirectoryIterator($dir)); foreach ($iterator as $file) { echo $file->getType() . ': ' . $file . "\n"; }

Another way to list the contents of a bucket recursively that incurs fewer HTTP requests is to use the Aws\recursive_dir_iterator($path, $context = null) function.

<?php require 'vendor/autoload.php'; $iter = Aws\recursive_dir_iterator('s3://bucket/key'); foreach ($iter as $filename) { echo $filename . "\n"; }

Stream Context Options

You can customize the client used by the stream wrapper, or the cache used to cache previously loaded information about buckets and keys, by passing in custom stream context options.

The stream wrapper supports the following stream context options on every operation.

client

The Aws\AwsClientInterface object to use to execute commands.

cache

An instance of Aws\CacheInterface to use to cache previously obtained file stats. By default, the stream wrapper will use an in-memory LRU cache.