AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.
Name | Description | |
---|---|---|
AccessToSnapshotDeniedException | Redshift exception | |
AccountWithRestoreAccess | Describes an AWS customer account authorized to restore a snapshot. | |
AuthorizationAlreadyExistsException | Redshift exception | |
AuthorizationNotFoundException | Redshift exception | |
AuthorizationQuotaExceededException | Redshift exception | |
AuthorizeClusterSecurityGroupIngressRequest |
Container for the parameters to the AuthorizeClusterSecurityGroupIngress operation.
Adds an inbound (ingress) rule to an Amazon Redshift security group. Depending on
whether the application accessing your cluster is running on the Internet or an EC2
instance, you can authorize inbound access to either a Classless Interdomain Routing
(CIDR) IP address range or an EC2 security group. You can add as many as 20 ingress
rules to an Amazon Redshift security group.
For an overview of CIDR blocks, see the Wikipedia article on Classless Inter-Domain Routing. You must also associate the security group with a cluster so that clients running on these IP addresses or the EC2 instance are authorized to connect to the cluster. For information about managing security groups, go to Working with Security Groups in the Amazon Redshift Cluster Management Guide. |
|
AuthorizeClusterSecurityGroupIngressResponse | Configuration for accessing Amazon AuthorizeClusterSecurityGroupIngress service | |
AuthorizeClusterSecurityGroupIngressResult | Describes a security group. | |
AuthorizeSnapshotAccessRequest |
Container for the parameters to the AuthorizeSnapshotAccess operation.
Authorizes the specified AWS customer account to restore the specified snapshot.
For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide. |
|
AuthorizeSnapshotAccessResponse | Configuration for accessing Amazon AuthorizeSnapshotAccess service | |
AuthorizeSnapshotAccessResult | Describes a snapshot. | |
AvailabilityZone | Describes an availability zone. | |
BucketNotFoundException | Redshift exception | |
Cluster | Describes a cluster. | |
ClusterAlreadyExistsException | Redshift exception | |
ClusterNode | The identifier of a node in a cluster. | |
ClusterNotFoundException | Redshift exception | |
ClusterParameterGroup | Describes a parameter group. | |
ClusterParameterGroupAlreadyExistsException | Redshift exception | |
ClusterParameterGroupNotFoundException | Redshift exception | |
ClusterParameterGroupQuotaExceededException | Redshift exception | |
ClusterParameterGroupStatus | Describes the status of a parameter group. | |
ClusterParameterStatus | Describes the status of a parameter group. | |
ClusterQuotaExceededException | Redshift exception | |
ClusterSecurityGroup | Describes a security group. | |
ClusterSecurityGroupAlreadyExistsException | Redshift exception | |
ClusterSecurityGroupMembership | Describes a security group. | |
ClusterSecurityGroupNotFoundException | Redshift exception | |
ClusterSecurityGroupQuotaExceededException | Redshift exception | |
ClusterSnapshotAlreadyExistsException | Redshift exception | |
ClusterSnapshotCopyStatus | Returns the destination region and retention period that are configured for cross-region snapshot copy. | |
ClusterSnapshotNotFoundException | Redshift exception | |
ClusterSnapshotQuotaExceededException | Redshift exception | |
ClusterSubnetGroup | Describes a subnet group. | |
ClusterSubnetGroupAlreadyExistsException | Redshift exception | |
ClusterSubnetGroupNotFoundException | Redshift exception | |
ClusterSubnetGroupQuotaExceededException | Redshift exception | |
ClusterSubnetQuotaExceededException | Redshift exception | |
ClusterVersion | Describes a cluster version, including the parameter group family and description of the version. | |
CopyClusterSnapshotRequest |
Container for the parameters to the CopyClusterSnapshot operation.
Copies the specified automated cluster snapshot to a new manual cluster snapshot.
The source must be an automated snapshot and it must be in the available state.
When you delete a cluster, Amazon Redshift deletes any automated snapshots of the cluster. Also, when the retention period of the snapshot expires, Amazon Redshift automatically deletes it. If you want to keep an automated snapshot for a longer period, you can make a manual copy of the snapshot. Manual snapshots are retained until you delete them. For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide. |
|
CopyClusterSnapshotResponse | Configuration for accessing Amazon CopyClusterSnapshot service | |
CopyClusterSnapshotResult | Describes a snapshot. | |
CopyToRegionDisabledException | Redshift exception | |
CreateClusterParameterGroupRequest |
Container for the parameters to the CreateClusterParameterGroup operation.
Creates an Amazon Redshift parameter group.
Creating parameter groups is independent of creating clusters. You can associate a cluster with a parameter group when you create the cluster. You can also associate an existing cluster with a parameter group after the cluster is created by using ModifyCluster. Parameters in the parameter group define specific behavior that applies to the databases you create on the cluster. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide. |
|
CreateClusterParameterGroupResponse | Configuration for accessing Amazon CreateClusterParameterGroup service | |
CreateClusterParameterGroupResult | Describes a parameter group. | |
CreateClusterRequest | Container for the parameters to the CreateCluster operation. Creates a new cluster. To create the cluster in virtual private cloud (VPC), you must provide cluster subnet group name. If you don't provide a cluster subnet group name or the cluster security group parameter, Amazon Redshift creates a non-VPC cluster, it associates the default cluster security group with the cluster. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide . | |
CreateClusterResponse | Configuration for accessing Amazon CreateCluster service | |
CreateClusterResult | Describes a cluster. | |
CreateClusterSecurityGroupRequest |
Container for the parameters to the CreateClusterSecurityGroup operation.
Creates a new Amazon Redshift security group. You use security groups to control
access to non-VPC clusters.
For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide. |
|
CreateClusterSecurityGroupResponse | Configuration for accessing Amazon CreateClusterSecurityGroup service | |
CreateClusterSecurityGroupResult | Describes a security group. | |
CreateClusterSnapshotRequest |
Container for the parameters to the CreateClusterSnapshot operation.
Creates a manual snapshot of the specified cluster. The cluster must be in the available
state.
For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide. |
|
CreateClusterSnapshotResponse | Configuration for accessing Amazon CreateClusterSnapshot service | |
CreateClusterSnapshotResult | Describes a snapshot. | |
CreateClusterSubnetGroupRequest |
Container for the parameters to the CreateClusterSubnetGroup operation.
Creates a new Amazon Redshift subnet group. You must provide a list of one or more
subnets in your existing Amazon Virtual Private Cloud (Amazon VPC) when creating Amazon
Redshift subnet group.
For information about subnet groups, go to Amazon Redshift Cluster Subnet Groups in the Amazon Redshift Cluster Management Guide. |
|
CreateClusterSubnetGroupResponse | Configuration for accessing Amazon CreateClusterSubnetGroup service | |
CreateClusterSubnetGroupResult | Describes a subnet group. | |
CreateEventSubscriptionRequest |
Container for the parameters to the CreateEventSubscription operation.
Creates an Amazon Redshift event notification subscription. This action requires
an ARN (Amazon Resource Name) of an Amazon SNS topic created by either the Amazon
Redshift console, the Amazon SNS console, or the Amazon SNS API. To obtain an ARN
with Amazon SNS, you must create a topic in Amazon SNS and subscribe to the topic.
The ARN is displayed in the SNS console.
You can specify the source type, and lists of Amazon Redshift source IDs, event categories, and event severities. Notifications will be sent for all events you want that match those criteria. For example, you can specify source type = cluster, source ID = my-cluster-1 and mycluster2, event categories = Availability, Backup, and severity = ERROR. The subscription will only send notifications for those ERROR events in the Availability and Backup categories for the specified clusters. If you specify both the source type and source IDs, such as source type = cluster and source identifier = my-cluster-1, notifications will be sent for all the cluster events for my-cluster-1. If you specify a source type but do not specify a source identifier, you will receive notice of the events for the objects of that type in your AWS account. If you do not specify either the SourceType nor the SourceIdentifier, you will be notified of events generated from all Amazon Redshift sources belonging to your AWS account. You must specify a source type if you specify a source ID. |
|
CreateEventSubscriptionResponse | Configuration for accessing Amazon CreateEventSubscription service | |
CreateEventSubscriptionResult | ||
CreateHsmClientCertificateRequest |
Container for the parameters to the CreateHsmClientCertificate operation.
Creates an HSM client certificate that an Amazon Redshift cluster will use to connect
to the client's HSM in order to store and retrieve the keys used to encrypt the cluster
databases.
The command returns a public key, which you must store in the HSM. In addition to creating the HSM certificate, you must create an Amazon Redshift HSM configuration that provides a cluster the information needed to store and use encryption keys in the HSM. For more information, go to Hardware Security Modules in the Amazon Redshift Cluster Management Guide. |
|
CreateHsmClientCertificateResponse | Configuration for accessing Amazon CreateHsmClientCertificate service | |
CreateHsmClientCertificateResult | Returns information about an HSM client certificate. The certificate is stored in a secure Hardware Storage Module (HSM), and used by the Amazon Redshift cluster to encrypt data files. | |
CreateHsmConfigurationRequest |
Container for the parameters to the CreateHsmConfiguration operation.
Creates an HSM configuration that contains the information required by an Amazon Redshift
cluster to store and use database encryption keys in a Hardware Security Module (HSM).
After creating the HSM configuration, you can specify it as a parameter when creating
a cluster. The cluster will then store its encryption keys in the HSM.
In addition to creating an HSM configuration, you must also create an HSM client certificate. For more information, go to Hardware Security Modules in the Amazon Redshift Cluster Management Guide. |
|
CreateHsmConfigurationResponse | Configuration for accessing Amazon CreateHsmConfiguration service | |
CreateHsmConfigurationResult | Returns information about an HSM configuration, which is an object that describes to Amazon Redshift clusters the information they require to connect to an HSM where they can store database encryption keys. | |
CreateSnapshotCopyGrantRequest |
Container for the parameters to the CreateSnapshotCopyGrant operation.
Creates a snapshot copy grant that permits Amazon Redshift to use a customer master
key (CMK) from AWS Key Management Service (AWS KMS) to encrypt copied snapshots in
a destination region.
For more information about managing snapshot copy grants, go to Amazon Redshift Database Encryption in the Amazon Redshift Cluster Management Guide. |
|
CreateSnapshotCopyGrantResponse | Configuration for accessing Amazon CreateSnapshotCopyGrant service | |
CreateSnapshotCopyGrantResult |
The snapshot copy grant that grants Amazon Redshift permission to encrypt copied snapshots
with the specified customer master key (CMK) from AWS KMS in the destination region.
For more information about managing snapshot copy grants, go to Amazon Redshift Database Encryption in the Amazon Redshift Cluster Management Guide. |
|
CreateTagsRequest |
Container for the parameters to the CreateTags operation.
Adds one or more tags to a specified resource.
A resource can have up to 10 tags. If you try to create more than 10 tags for a resource, you will receive an error and the attempt will fail. If you specify a key that already exists for the resource, the value for that key will be updated with the new value. |
|
CreateTagsResponse | ||
DefaultClusterParameters | Describes the default cluster parameters for a parameter group family. | |
DeleteClusterParameterGroupRequest |
Container for the parameters to the DeleteClusterParameterGroup operation.
Deletes a specified Amazon Redshift parameter group. |
|
DeleteClusterParameterGroupResponse | ||
DeleteClusterRequest |
Container for the parameters to the DeleteCluster operation.
Deletes a previously provisioned cluster. A successful response from the web service
indicates that the request was received correctly. Use DescribeClusters to
monitor the status of the deletion. The delete operation cannot be canceled or reverted
once submitted. For more information about managing clusters, go to Amazon
Redshift Clusters in the Amazon Redshift Cluster Management Guide .
If you want to shut down the cluster and retain it for future use, set SkipFinalClusterSnapshot
to For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide . |
|
DeleteClusterResponse | Configuration for accessing Amazon DeleteCluster service | |
DeleteClusterResult | Describes a cluster. | |
DeleteClusterSecurityGroupRequest |
Container for the parameters to the DeleteClusterSecurityGroup operation.
Deletes an Amazon Redshift security group.
For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide. |
|
DeleteClusterSecurityGroupResponse | ||
DeleteClusterSnapshotRequest |
Container for the parameters to the DeleteClusterSnapshot operation.
Deletes the specified manual snapshot. The snapshot must be in the available
state, with no other users authorized to access the snapshot.
Unlike automated snapshots, manual snapshots are retained even after you delete your cluster. Amazon Redshift does not delete your manual snapshots. You must delete manual snapshot explicitly to avoid getting charged. If other accounts are authorized to access the snapshot, you must revoke all of the authorizations before you can delete the snapshot. |
|
DeleteClusterSnapshotResponse | Configuration for accessing Amazon DeleteClusterSnapshot service | |
DeleteClusterSnapshotResult | Describes a snapshot. | |
DeleteClusterSubnetGroupRequest | Container for the parameters to the DeleteClusterSubnetGroup operation. Deletes the specified cluster subnet group. | |
DeleteClusterSubnetGroupResponse | ||
DeleteEventSubscriptionRequest | Container for the parameters to the DeleteEventSubscription operation. Deletes an Amazon Redshift event notification subscription. | |
DeleteEventSubscriptionResponse | ||
DeleteHsmClientCertificateRequest | Container for the parameters to the DeleteHsmClientCertificate operation. Deletes the specified HSM client certificate. | |
DeleteHsmClientCertificateResponse | ||
DeleteHsmConfigurationRequest | Container for the parameters to the DeleteHsmConfiguration operation. Deletes the specified Amazon Redshift HSM configuration. | |
DeleteHsmConfigurationResponse | ||
DeleteSnapshotCopyGrantRequest | Container for the parameters to the DeleteSnapshotCopyGrant operation. Deletes the specified snapshot copy grant. | |
DeleteSnapshotCopyGrantResponse | ||
DeleteTagsRequest | Container for the parameters to the DeleteTags operation. Deletes a tag or tags from a resource. You must provide the ARN of the resource from which you want to delete the tag or tags. | |
DeleteTagsResponse | ||
DescribeClusterParameterGroupsRequest |
Container for the parameters to the DescribeClusterParameterGroups operation.
Returns a list of Amazon Redshift parameter groups, including parameter groups you
created and the default parameter group. For each parameter group, the response includes
the parameter group name, description, and parameter group family name. You can optionally
specify a name to retrieve the description of a specific parameter group.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide.
If you specify both tag keys and tag values in the same request, Amazon Redshift returns
all parameter groups that match any combination of the specified keys and values.
For example, if you have If both tag keys and values are omitted from the request, parameter groups are returned regardless of whether they have tag keys or values associated with them. |
|
DescribeClusterParameterGroupsResponse | Configuration for accessing Amazon DescribeClusterParameterGroups service | |
DescribeClusterParameterGroupsResult | Contains the output from the DescribeClusterParameterGroups action. | |
DescribeClusterParametersRequest |
Container for the parameters to the DescribeClusterParameters operation.
Returns a detailed list of parameters contained within the specified Amazon Redshift
parameter group. For each parameter the response includes information such as parameter
name, description, data type, value, whether the parameter value is modifiable, and
so on.
You can specify source filter to retrieve parameters of only specific type. For example, to retrieve parameters that were modified by a user action such as from ModifyClusterParameterGroup, you can specify source equal to user. For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide. |
|
DescribeClusterParametersResponse | Configuration for accessing Amazon DescribeClusterParameters service | |
DescribeClusterParametersResult | Contains the output from the DescribeClusterParameters action. | |
DescribeClusterSecurityGroupsRequest |
Container for the parameters to the DescribeClusterSecurityGroups operation.
Returns information about Amazon Redshift security groups. If the name of a security
group is specified, the response will contain only information about only that security
group.
For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide.
If you specify both tag keys and tag values in the same request, Amazon Redshift returns
all security groups that match any combination of the specified keys and values. For
example, if you have If both tag keys and values are omitted from the request, security groups are returned regardless of whether they have tag keys or values associated with them. |
|
DescribeClusterSecurityGroupsResponse | Configuration for accessing Amazon DescribeClusterSecurityGroups service | |
DescribeClusterSecurityGroupsResult | Contains the output from the DescribeClusterSecurityGroups action. | |
DescribeClusterSnapshotsRequest |
Container for the parameters to the DescribeClusterSnapshots operation.
Returns one or more snapshot objects, which contain metadata about your cluster snapshots.
By default, this operation returns information about all snapshots of all clusters
that are owned by you AWS customer account. No information is returned for snapshots
owned by inactive AWS customer accounts.
If you specify both tag keys and tag values in the same request, Amazon Redshift returns
all snapshots that match any combination of the specified keys and values. For example,
if you have If both tag keys and values are omitted from the request, snapshots are returned regardless of whether they have tag keys or values associated with them. |
|
DescribeClusterSnapshotsResponse | Configuration for accessing Amazon DescribeClusterSnapshots service | |
DescribeClusterSnapshotsResult | Contains the output from the DescribeClusterSnapshots action. | |
DescribeClustersRequest |
Container for the parameters to the DescribeClusters operation.
Returns properties of provisioned clusters including general cluster properties,
cluster database properties, maintenance and backup properties, and security and access
properties. This operation supports pagination. For more information about managing
clusters, go to Amazon
Redshift Clusters in the Amazon Redshift Cluster Management Guide .
If you specify both tag keys and tag values in the same request, Amazon Redshift returns
all clusters that match any combination of the specified keys and values. For example,
if you have If both tag keys and values are omitted from the request, clusters are returned regardless of whether they have tag keys or values associated with them. |
|
DescribeClustersResponse | Configuration for accessing Amazon DescribeClusters service | |
DescribeClustersResult | Contains the output from the DescribeClusters action. | |
DescribeClusterSubnetGroupsRequest |
Container for the parameters to the DescribeClusterSubnetGroups operation.
Returns one or more cluster subnet group objects, which contain metadata about your
cluster subnet groups. By default, this operation returns information about all cluster
subnet groups that are defined in you AWS account.
If you specify both tag keys and tag values in the same request, Amazon Redshift returns
all subnet groups that match any combination of the specified keys and values. For
example, if you have If both tag keys and values are omitted from the request, subnet groups are returned regardless of whether they have tag keys or values associated with them. |
|
DescribeClusterSubnetGroupsResponse | Configuration for accessing Amazon DescribeClusterSubnetGroups service | |
DescribeClusterSubnetGroupsResult | Contains the output from the DescribeClusterSubnetGroups action. | |
DescribeClusterVersionsRequest | Container for the parameters to the DescribeClusterVersions operation. Returns descriptions of the available Amazon Redshift cluster versions. You can call this operation even before creating any clusters to learn more about the Amazon Redshift versions. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide | |
DescribeClusterVersionsResponse | Configuration for accessing Amazon DescribeClusterVersions service | |
DescribeClusterVersionsResult | Contains the output from the DescribeClusterVersions action. | |
DescribeDefaultClusterParametersRequest |
Container for the parameters to the DescribeDefaultClusterParameters operation.
Returns a list of parameter settings for the specified parameter group family.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide. |
|
DescribeDefaultClusterParametersResponse | Configuration for accessing Amazon DescribeDefaultClusterParameters service | |
DescribeDefaultClusterParametersResult | Describes the default cluster parameters for a parameter group family. | |
DescribeEventCategoriesRequest | Container for the parameters to the DescribeEventCategories operation. Displays a list of event categories for all event source types, or for a specified source type. For a list of the event categories and source types, go to Amazon Redshift Event Notifications. | |
DescribeEventCategoriesResponse | Configuration for accessing Amazon DescribeEventCategories service | |
DescribeEventCategoriesResult | ||
DescribeEventsRequest | Container for the parameters to the DescribeEvents operation. Returns events related to clusters, security groups, snapshots, and parameter groups for the past 14 days. Events specific to a particular cluster, security group, snapshot or parameter group can be obtained by providing the name as a parameter. By default, the past hour of events are returned. | |
DescribeEventsResponse | Configuration for accessing Amazon DescribeEvents service | |
DescribeEventsResult | Contains the output from the DescribeEvents action. | |
DescribeEventSubscriptionsRequest | Container for the parameters to the DescribeEventSubscriptions operation. Lists descriptions of all the Amazon Redshift event notifications subscription for a customer account. If you specify a subscription name, lists the description for that subscription. | |
DescribeEventSubscriptionsResponse | Configuration for accessing Amazon DescribeEventSubscriptions service | |
DescribeEventSubscriptionsResult | ||
DescribeHsmClientCertificatesRequest |
Container for the parameters to the DescribeHsmClientCertificates operation.
Returns information about the specified HSM client certificate. If no certificate
ID is specified, returns information about all the HSM certificates owned by your
AWS customer account.
If you specify both tag keys and tag values in the same request, Amazon Redshift returns
all HSM client certificates that match any combination of the specified keys and values.
For example, if you have If both tag keys and values are omitted from the request, HSM client certificates are returned regardless of whether they have tag keys or values associated with them. |
|
DescribeHsmClientCertificatesResponse | Configuration for accessing Amazon DescribeHsmClientCertificates service | |
DescribeHsmClientCertificatesResult | ||
DescribeHsmConfigurationsRequest |
Container for the parameters to the DescribeHsmConfigurations operation.
Returns information about the specified Amazon Redshift HSM configuration. If no configuration
ID is specified, returns information about all the HSM configurations owned by your
AWS customer account.
If you specify both tag keys and tag values in the same request, Amazon Redshift returns
all HSM connections that match any combination of the specified keys and values. For
example, if you have If both tag keys and values are omitted from the request, HSM connections are returned regardless of whether they have tag keys or values associated with them. |
|
DescribeHsmConfigurationsResponse | Configuration for accessing Amazon DescribeHsmConfigurations service | |
DescribeHsmConfigurationsResult | ||
DescribeLoggingStatusRequest | Container for the parameters to the DescribeLoggingStatus operation. Describes whether information, such as queries and connection attempts, is being logged for the specified Amazon Redshift cluster. | |
DescribeLoggingStatusResponse | Configuration for accessing Amazon DescribeLoggingStatus service | |
DescribeLoggingStatusResult | Describes the status of logging for a cluster. | |
DescribeOrderableClusterOptionsRequest | Container for the parameters to the DescribeOrderableClusterOptions operation. Returns a list of orderable cluster options. Before you create a new cluster you can use this operation to find what options are available, such as the EC2 Availability Zones (AZ) in the specific AWS region that you can specify, and the node types you can request. The node types differ by available storage, memory, CPU and price. With the cost involved you might want to obtain a list of cluster options in the specific region and specify values when creating a cluster. For more information about managing clusters, go to Amazon Redshift Clusters in the Amazon Redshift Cluster Management Guide | |
DescribeOrderableClusterOptionsResponse | Configuration for accessing Amazon DescribeOrderableClusterOptions service | |
DescribeOrderableClusterOptionsResult | Contains the output from the DescribeOrderableClusterOptions action. | |
DescribeReservedNodeOfferingsRequest |
Container for the parameters to the DescribeReservedNodeOfferings operation.
Returns a list of the available reserved node offerings by Amazon Redshift with their
descriptions including the node type, the fixed and recurring costs of reserving the
node and duration the node will be reserved for you. These descriptions help you determine
which reserve node offering you want to purchase. You then use the unique offering
ID in you call to PurchaseReservedNodeOffering to reserve one or more nodes
for your Amazon Redshift cluster.
For more information about reserved node offerings, go to Purchasing Reserved Nodes in the Amazon Redshift Cluster Management Guide. |
|
DescribeReservedNodeOfferingsResponse | Configuration for accessing Amazon DescribeReservedNodeOfferings service | |
DescribeReservedNodeOfferingsResult | Contains the output from the DescribeReservedNodeOfferings action. | |
DescribeReservedNodesRequest | Container for the parameters to the DescribeReservedNodes operation. Returns the descriptions of the reserved nodes. | |
DescribeReservedNodesResponse | Configuration for accessing Amazon DescribeReservedNodes service | |
DescribeReservedNodesResult | Contains the output from the DescribeReservedNodes action. | |
DescribeResizeRequest |
Container for the parameters to the DescribeResize operation.
Returns information about the last resize operation for the specified cluster. If
no resize operation has ever been initiated for the specified cluster, a HTTP 404error is returned. If a resize operation was initiated and completed, the status of the resize remains as SUCCEEDED until the next resize.
A resize operation can be requested using ModifyCluster and specifying a different number or type of nodes for the cluster. |
|
DescribeResizeResponse | Configuration for accessing Amazon DescribeResize service | |
DescribeResizeResult | Describes the result of a cluster resize operation. | |
DescribeSnapshotCopyGrantsRequest |
Container for the parameters to the DescribeSnapshotCopyGrants operation.
Returns a list of snapshot copy grants owned by the AWS account in the destination
region.
For more information about managing snapshot copy grants, go to Amazon Redshift Database Encryption in the Amazon Redshift Cluster Management Guide. |
|
DescribeSnapshotCopyGrantsResponse | Configuration for accessing Amazon DescribeSnapshotCopyGrants service | |
DescribeSnapshotCopyGrantsResult | The result of the snapshot copy grant. | |
DescribeTagsRequest |
Container for the parameters to the DescribeTags operation.
Returns a list of tags. You can return tags from a specific resource by specifying
an ARN, or you can return all tags for a given type of resource, such as clusters,
snapshots, and so on.
The following are limitations for
If you specify both tag keys and tag values in the same request, Amazon Redshift returns
all resources that match any combination of the specified keys and values. For example,
if you have If both tag keys and values are omitted from the request, resources are returned regardless of whether they have tag keys or values associated with them. |
|
DescribeTagsResponse | Configuration for accessing Amazon DescribeTags service | |
DescribeTagsResult |
Contains the output from the DescribeTags action.
|
|
DisableLoggingRequest | Container for the parameters to the DisableLogging operation. Stops logging information, such as queries and connection attempts, for the specified Amazon Redshift cluster. | |
DisableLoggingResponse | Configuration for accessing Amazon DisableLogging service | |
DisableLoggingResult | Describes the status of logging for a cluster. | |
DisableSnapshotCopyRequest |
Container for the parameters to the DisableSnapshotCopy operation.
Disables the automatic copying of snapshots from one region to another region for
a specified cluster.
If your cluster and its snapshots are encrypted using a customer master key (CMK) from AWS KMS, use DeleteSnapshotCopyGrant to delete the grant that grants Amazon Redshift permission to the CMK in the destination region. |
|
DisableSnapshotCopyResponse | Configuration for accessing Amazon DisableSnapshotCopy service | |
DisableSnapshotCopyResult | Describes a cluster. | |
EC2SecurityGroup | Describes an Amazon EC2 security group. | |
ElasticIpStatus | Describes the status of the elastic IP (EIP) address. | |
EnableLoggingRequest | Container for the parameters to the EnableLogging operation. Starts logging information, such as queries and connection attempts, for the specified Amazon Redshift cluster. | |
EnableLoggingResponse | Configuration for accessing Amazon EnableLogging service | |
EnableLoggingResult | Describes the status of logging for a cluster. | |
EnableSnapshotCopyRequest | Container for the parameters to the EnableSnapshotCopy operation. Enables the automatic copy of snapshots from one region to another region for a specified cluster. | |
EnableSnapshotCopyResponse | Configuration for accessing Amazon EnableSnapshotCopy service | |
EnableSnapshotCopyResult | Describes a cluster. | |
Endpoint | Describes a connection endpoint. | |
Event | Describes an event. | |
EventCategoriesMap | ||
EventInfoMap | ||
EventSubscription | ||
EventSubscriptionQuotaExceededException | Redshift exception | |
HsmClientCertificate | Returns information about an HSM client certificate. The certificate is stored in a secure Hardware Storage Module (HSM), and used by the Amazon Redshift cluster to encrypt data files. | |
HsmClientCertificateAlreadyExistsException | Redshift exception | |
HsmClientCertificateNotFoundException | Redshift exception | |
HsmClientCertificateQuotaExceededException | Redshift exception | |
HsmConfiguration | Returns information about an HSM configuration, which is an object that describes to Amazon Redshift clusters the information they require to connect to an HSM where they can store database encryption keys. | |
HsmConfigurationAlreadyExistsException | Redshift exception | |
HsmConfigurationNotFoundException | Redshift exception | |
HsmConfigurationQuotaExceededException | Redshift exception | |
HsmStatus | ||
IncompatibleOrderableOptionsException | Redshift exception | |
InsufficientClusterCapacityException | Redshift exception | |
InsufficientS3BucketPolicyException | Redshift exception | |
InvalidClusterParameterGroupStateException | Redshift exception | |
InvalidClusterSecurityGroupStateException | Redshift exception | |
InvalidClusterSnapshotStateException | Redshift exception | |
InvalidClusterStateException | Redshift exception | |
InvalidClusterSubnetGroupStateException | Redshift exception | |
InvalidClusterSubnetStateException | Redshift exception | |
InvalidElasticIpException | Redshift exception | |
InvalidHsmClientCertificateStateException | Redshift exception | |
InvalidHsmConfigurationStateException | Redshift exception | |
InvalidRestoreException | Redshift exception | |
InvalidS3BucketNameException | Redshift exception | |
InvalidS3KeyPrefixException | Redshift exception | |
InvalidSnapshotCopyGrantStateException | Redshift exception | |
InvalidSubnetException | Redshift exception | |
InvalidSubscriptionStateException | Redshift exception | |
InvalidTagException | Redshift exception | |
InvalidVPCNetworkStateException | Redshift exception | |
IPRange | Describes an IP range used in a security group. | |
LimitExceededException | Redshift exception | |
ModifyClusterParameterGroupRequest |
Container for the parameters to the ModifyClusterParameterGroup operation.
Modifies the parameters of a parameter group.
For more information about parameters and parameter groups, go to Amazon Redshift Parameter Groups in the Amazon Redshift Cluster Management Guide. |
|
ModifyClusterParameterGroupResponse | Configuration for accessing Amazon ModifyClusterParameterGroup service | |
ModifyClusterParameterGroupResult | Contains the output from the ModifyClusterParameterGroup and ResetClusterParameterGroup actions and indicate the parameter group involved and the status of the operation on the parameter group. | |
ModifyClusterRequest |
Container for the parameters to the ModifyCluster operation.
Modifies the settings for a cluster. For example, you can add another security or
parameter group, update the preferred maintenance window, or change the master user
password. Resetting a cluster password or modifying the security groups associated
with a cluster do not need a reboot. However, modifying a parameter group requires
a reboot for parameters to take effect. For more information about managing clusters,
go to Amazon
Redshift Clusters in the Amazon Redshift Cluster Management Guide .
You can also change node type and the number of nodes to scale up or down the cluster. When resizing a cluster, you must specify both the number of nodes and the node type even if one of the parameters does not change. |
|
ModifyClusterResponse | Configuration for accessing Amazon ModifyCluster service | |
ModifyClusterResult | Describes a cluster. | |
ModifyClusterSubnetGroupRequest | Container for the parameters to the ModifyClusterSubnetGroup operation. Modifies a cluster subnet group to include the specified list of VPC subnets. The operation replaces the existing list of subnets with the new list of subnets. | |
ModifyClusterSubnetGroupResponse | Configuration for accessing Amazon ModifyClusterSubnetGroup service | |
ModifyClusterSubnetGroupResult | Describes a subnet group. | |
ModifyEventSubscriptionRequest | Container for the parameters to the ModifyEventSubscription operation. Modifies an existing Amazon Redshift event notification subscription. | |
ModifyEventSubscriptionResponse | Configuration for accessing Amazon ModifyEventSubscription service | |
ModifyEventSubscriptionResult | ||
ModifySnapshotCopyRetentionPeriodRequest | Container for the parameters to the ModifySnapshotCopyRetentionPeriod operation. Modifies the number of days to retain automated snapshots in the destination region after they are copied from the source region. | |
ModifySnapshotCopyRetentionPeriodResponse | Configuration for accessing Amazon ModifySnapshotCopyRetentionPeriod service | |
ModifySnapshotCopyRetentionPeriodResult | Describes a cluster. | |
NumberOfNodesPerClusterLimitExceededException | Redshift exception | |
NumberOfNodesQuotaExceededException | Redshift exception | |
OrderableClusterOption | Describes an orderable cluster option. | |
Parameter | Describes a parameter in a cluster parameter group. | |
PendingModifiedValues | Describes cluster attributes that are in a pending state. A change to one or more the attributes was requested and is in progress or will be applied. | |
PurchaseReservedNodeOfferingRequest |
Container for the parameters to the PurchaseReservedNodeOffering operation.
Allows you to purchase reserved nodes. Amazon Redshift offers a predefined set of
reserved node offerings. You can purchase one or more of the offerings. You can call
the DescribeReservedNodeOfferings API to obtain the available reserved node
offerings. You can call this API by providing a specific reserved node offering and
the number of nodes you want to reserve.
For more information about reserved node offerings, go to Purchasing Reserved Nodes in the Amazon Redshift Cluster Management Guide. |
|
PurchaseReservedNodeOfferingResponse | Configuration for accessing Amazon PurchaseReservedNodeOffering service | |
PurchaseReservedNodeOfferingResult | Describes a reserved node. You can call the DescribeReservedNodeOfferings API to obtain the available reserved node offerings. | |
RebootClusterRequest |
Container for the parameters to the RebootCluster operation.
Reboots a cluster. This action is taken as soon as possible. It results in a momentary
outage to the cluster, during which the cluster status is set to rebooting .
A cluster event is created when the reboot is completed. Any pending cluster modifications
(see ModifyCluster) are applied at this reboot. For more information about
managing clusters, go to Amazon
Redshift Clusters in the Amazon Redshift Cluster Management Guide
|
|
RebootClusterResponse | Configuration for accessing Amazon RebootCluster service | |
RebootClusterResult | Describes a cluster. | |
RecurringCharge | Describes a recurring charge. | |
ReservedNode | Describes a reserved node. You can call the DescribeReservedNodeOfferings API to obtain the available reserved node offerings. | |
ReservedNodeAlreadyExistsException | Redshift exception | |
ReservedNodeNotFoundException | Redshift exception | |
ReservedNodeOffering | Describes a reserved node offering. | |
ReservedNodeOfferingNotFoundException | Redshift exception | |
ReservedNodeQuotaExceededException | Redshift exception | |
ResetClusterParameterGroupRequest | Container for the parameters to the ResetClusterParameterGroup operation. Sets one or more parameters of the specified parameter group to their default values and sets the source values of the parameters to "engine-default". To reset the entire parameter group specify the ResetAllParameters parameter. For parameter changes to take effect you must reboot any associated clusters. | |
ResetClusterParameterGroupResponse | Configuration for accessing Amazon ResetClusterParameterGroup service | |
ResetClusterParameterGroupResult | Contains the output from the ModifyClusterParameterGroup and ResetClusterParameterGroup actions and indicate the parameter group involved and the status of the operation on the parameter group. | |
ResizeNotFoundException | Redshift exception | |
ResourceNotFoundException | Redshift exception | |
RestoreFromClusterSnapshotRequest |
Container for the parameters to the RestoreFromClusterSnapshot operation.
Creates a new cluster from a snapshot. By default, Amazon Redshift creates the resulting
cluster with the same configuration as the original cluster from which the snapshot
was created, except that the new cluster is created with the default cluster security
and parameter groups. After Amazon Redshift creates the cluster, you can use the ModifyCluster
API to associate a different security group and different parameter group with the
restored cluster. If you are using a DS node type, you can also choose to change to
another DS node type of the same size during restore.
If you restore a cluster into a VPC, you must provide a cluster subnet group where you want the cluster restored. For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide. |
|
RestoreFromClusterSnapshotResponse | Configuration for accessing Amazon RestoreFromClusterSnapshot service | |
RestoreFromClusterSnapshotResult | Describes a cluster. | |
RestoreStatus | Describes the status of a cluster restore action. Returns null if the cluster was not created by restoring a snapshot. | |
RevokeClusterSecurityGroupIngressRequest | Container for the parameters to the RevokeClusterSecurityGroupIngress operation. Revokes an ingress rule in an Amazon Redshift security group for a previously authorized IP range or Amazon EC2 security group. To add an ingress rule, see AuthorizeClusterSecurityGroupIngress. For information about managing security groups, go to Amazon Redshift Cluster Security Groups in the Amazon Redshift Cluster Management Guide. | |
RevokeClusterSecurityGroupIngressResponse | Configuration for accessing Amazon RevokeClusterSecurityGroupIngress service | |
RevokeClusterSecurityGroupIngressResult | Describes a security group. | |
RevokeSnapshotAccessRequest |
Container for the parameters to the RevokeSnapshotAccess operation.
Removes the ability of the specified AWS customer account to restore the specified
snapshot. If the account is currently restoring the snapshot, the restore will run
to completion.
For more information about working with snapshots, go to Amazon Redshift Snapshots in the Amazon Redshift Cluster Management Guide. |
|
RevokeSnapshotAccessResponse | Configuration for accessing Amazon RevokeSnapshotAccess service | |
RevokeSnapshotAccessResult | Describes a snapshot. | |
RotateEncryptionKeyRequest | Container for the parameters to the RotateEncryptionKey operation. Rotates the encryption keys for a cluster. | |
RotateEncryptionKeyResponse | Configuration for accessing Amazon RotateEncryptionKey service | |
RotateEncryptionKeyResult | Describes a cluster. | |
Snapshot | Describes a snapshot. | |
SnapshotCopyAlreadyDisabledException | Redshift exception | |
SnapshotCopyAlreadyEnabledException | Redshift exception | |
SnapshotCopyDisabledException | Redshift exception | |
SnapshotCopyGrant |
The snapshot copy grant that grants Amazon Redshift permission to encrypt copied snapshots
with the specified customer master key (CMK) from AWS KMS in the destination region.
For more information about managing snapshot copy grants, go to Amazon Redshift Database Encryption in the Amazon Redshift Cluster Management Guide. |
|
SnapshotCopyGrantAlreadyExistsException | Redshift exception | |
SnapshotCopyGrantNotFoundException | Redshift exception | |
SnapshotCopyGrantQuotaExceededException | Redshift exception | |
SNSInvalidTopicException | Redshift exception | |
SNSNoAuthorizationException | Redshift exception | |
SNSTopicArnNotFoundException | Redshift exception | |
SourceNotFoundException | Redshift exception | |
Subnet | Describes a subnet. | |
SubnetAlreadyInUseException | Redshift exception | |
SubscriptionAlreadyExistException | Redshift exception | |
SubscriptionCategoryNotFoundException | Redshift exception | |
SubscriptionEventIdNotFoundException | Redshift exception | |
SubscriptionNotFoundException | Redshift exception | |
SubscriptionSeverityNotFoundException | Redshift exception | |
Tag | A tag consisting of a name/value pair for a resource. | |
TaggedResource | A tag and its associated resource. | |
TagLimitExceededException | Redshift exception | |
UnauthorizedOperationException | Redshift exception | |
UnknownSnapshotCopyRegionException | Redshift exception | |
UnsupportedOperationException | Redshift exception | |
UnsupportedOptionException | Redshift exception | |
VpcSecurityGroupMembership | Describes the members of a VPC security group. |