AWS services or capabilities described in AWS Documentation may vary by region/location. Click Getting Started with Amazon AWS to see specific differences applicable to the China (Beijing) Region.
Name | Description | |
---|---|---|
Attribute | ||
AttributeDoesNotExistException | SimpleDB exception | |
BatchDeleteAttributesRequest |
Container for the parameters to the BatchDeleteAttributes operation.
Performs multiple DeleteAttributes operations in a single call, which reduces round
trips and latencies. This enables Amazon SimpleDB to optimize requests, which generally
yields better throughput.
The following limitations are enforced for this operation:
|
|
BatchDeleteAttributesResponse | ||
BatchPutAttributesRequest |
Container for the parameters to the BatchPutAttributes operation.
The BatchPutAttributes operation creates or replaces attributes within
one or more items. By using this operation, the client can perform multiple PutAttribute
operation with a single call. This helps yield savings in round trips and latencies,
enabling Amazon SimpleDB to optimize requests and generally produce better throughput.
The client may specify the item name with the Attributes are uniquely identified within an item by their name/value combination. For example, a single item can have the attributes { "first_name", "first_value" }and { "first_name", "second_value" } . However, it cannot have
two attribute instances where both the Item.X.Attribute.Y.Name and Item.X.Attribute.Y.Value
are the same.
Optionally, the requester can supply the { 'a', '1' }and { 'b', '4' } , replacing the previous values of
the 'b' attribute with the new value.
Expected.X.Name , Expected.X.Value , or Expected.X.Exists .
You can execute multiple The following limitations are enforced for this operation:
|
|
BatchPutAttributesResponse | ||
CreateDomainRequest |
Container for the parameters to the CreateDomain operation.
The CreateDomain operation creates a new domain. The domain name should
be unique among the domains associated with the Access Key ID provided in the request.
The CreateDomain operation may take 10 or more seconds to complete.
The client can create up to 100 domains per account. If the client requires additional domains, go to http://aws.amazon.com/contact-us/simpledb-limit-request/. |
|
CreateDomainResponse | ||
DeletableItem | ||
DeleteAttributesRequest |
Container for the parameters to the DeleteAttributes operation.
Deletes one or more attributes associated with an item. If all attributes of the
item are deleted, the item is deleted.
Because Amazon SimpleDB makes multiple copies of item data and uses an eventual consistency
update model, performing a GetAttributes or Select operation (read)
immediately after a |
|
DeleteAttributesResponse | ||
DeleteDomainRequest |
Container for the parameters to the DeleteDomain operation.
The DeleteDomain operation deletes a domain. Any items (and their attributes)
in the domain are deleted as well. The DeleteDomain operation might take
10 or more seconds to complete.
|
|
DeleteDomainResponse | ||
DomainMetadataRequest | Container for the parameters to the DomainMetadata operation. Returns information about the domain, including when the domain was created, the number of items and attributes in the domain, and the size of the attribute names and values. | |
DomainMetadataResponse | Configuration for accessing Amazon DomainMetadata service | |
DomainMetadataResult | ||
DuplicateItemNameException | SimpleDB exception | |
GetAttributesRequest |
Container for the parameters to the GetAttributes operation.
Returns all of the attributes associated with the specified item. Optionally, the
attributes returned can be limited to one or more attributes by specifying an attribute
name parameter.
If the item does not exist on the replica that was accessed for this operation, an empty set is returned. The system does not return an error as it cannot guarantee the item does not exist on other replicas. |
|
GetAttributesResponse | Configuration for accessing Amazon GetAttributes service | |
GetAttributesResult | ||
InvalidNextTokenException | SimpleDB exception | |
InvalidNumberPredicatesException | SimpleDB exception | |
InvalidNumberValueTestsException | SimpleDB exception | |
InvalidParameterValueException | SimpleDB exception | |
InvalidQueryExpressionException | SimpleDB exception | |
Item | ||
ListDomainsRequest |
Container for the parameters to the ListDomains operation.
The ListDomains operation lists all domains associated with the Access
Key ID. It returns domain names up to the limit set by MaxNumberOfDomains.
A NextToken is returned if there are more than MaxNumberOfDomains
domains. Calling ListDomains successive times with the NextToken
provided by the operation returns up to MaxNumberOfDomains more domain
names with each successive operation call.
|
|
ListDomainsResponse | Configuration for accessing Amazon ListDomains service | |
ListDomainsResult | ||
MissingParameterException | SimpleDB exception | |
NoSuchDomainException | SimpleDB exception | |
NumberDomainAttributesExceededException | SimpleDB exception | |
NumberDomainBytesExceededException | SimpleDB exception | |
NumberDomainsExceededException | SimpleDB exception | |
NumberItemAttributesExceededException | SimpleDB exception | |
NumberSubmittedAttributesExceededException | SimpleDB exception | |
NumberSubmittedItemsExceededException | SimpleDB exception | |
PutAttributesRequest |
Container for the parameters to the PutAttributes operation.
The PutAttributes operation creates or replaces attributes in an item. The client
may specify new attributes using a combination of the Attribute.X.Name
and Attribute.X.Value parameters. The client specifies the first attribute
by the parameters Attribute.0.Name and Attribute.0.Value ,
the second attribute by the parameters Attribute.1.Name and Attribute.1.Value ,
and so on.
Attributes are uniquely identified in an item by their name/value combination. For example, a single item can have the attributes { "first_name", "first_value" }and { "first_name", second_value" } . However, it cannot have
two attribute instances where both the Attribute.X.Name and Attribute.X.Value
are the same.
Optionally, the requestor can supply the { 'b', '3' }and the requestor calls PutAttributes using the attributes { 'b', '4' }with the Replace parameter set to true, the final attributes
of the item are changed to { 'a', '1' } and { 'b', '4' } ,
which replaces the previous values of the 'b' attribute with the new value.
You cannot specify an empty string as an attribute name. Because Amazon SimpleDB makes multiple copies of client data and uses an eventual consistency update model, an immediate GetAttributes or Select operation (read) immediately after a PutAttributes or DeleteAttributes operation (write) might not return the updated data. The following limitations are enforced for this operation:
|
|
PutAttributesResponse | ||
ReplaceableAttribute | ||
ReplaceableItem | ||
RequestTimeoutException | SimpleDB exception | |
SelectRequest |
Container for the parameters to the Select operation.
The Select operation returns a set of attributes for ItemNames
that match the select expression. Select is similar to the standard SQL
SELECT statement.
The total size of the response cannot exceed 1 MB in total size. Amazon SimpleDB
automatically adjusts the number of items returned per page to enforce this limit.
For example, if the client asks to retrieve 2500 items, but each individual item is
10 kB in size, the system returns 100 items and an appropriate For information on how to construct select expressions, see Using Select to Create Amazon SimpleDB Queries in the Developer Guide. |
|
SelectResponse | Configuration for accessing Amazon Select service | |
SelectResult | ||
TooManyRequestedAttributesException | SimpleDB exception | |
UpdateCondition | Specifies the conditions under which data should be updated. If an update condition is specified for a request, the data will only be updated if the condition is satisfied. For example, if an attribute with a specific name and value exists, or if a specific attribute doesn't exist. |