IAmazonChimeSDKMeetings Interface

Interface for accessing ChimeSDKMeetings

The Amazon Chime SDK meetings APIs in this section allow software developers to create Amazon Chime SDK meetings, set the Amazon Web Services Regions for meetings, create and manage users, and send and receive meeting notifications. For more information about the meeting APIs, see Amazon Chime SDK meetings.

Inheritance Hierarchy

Amazon.ChimeSDKMeetings.IAmazonChimeSDKMeetings

Namespace: Amazon.ChimeSDKMeetings
Assembly: AWSSDK.ChimeSDKMeetings.dll
Version: 3.x.y.z

Syntax

public interface IAmazonChimeSDKMeetings
         IAmazonService, IDisposable

The IAmazonChimeSDKMeetings type exposes the following members

Properties

	Name	Type	Description
	Paginators	Amazon.ChimeSDKMeetings.Model.IChimeSDKMeetingsPaginatorFactory	Paginators for the service

Methods

Note:

Asynchronous operations (methods ending with Async) in the table below are for .NET 4.5 or higher. For .NET 3.5 the SDK follows the standard naming convention of BeginMethodName and EndMethodName to indicate asynchronous operations - these method pairs are not shown in the table below.

	Name	Description
	BatchCreateAttendee(BatchCreateAttendeeRequest)	Creates up to 100 attendees for an active Amazon Chime SDK meeting. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	BatchCreateAttendeeAsync(BatchCreateAttendeeRequest, CancellationToken)	Creates up to 100 attendees for an active Amazon Chime SDK meeting. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	BatchUpdateAttendeeCapabilitiesExcept(BatchUpdateAttendeeCapabilitiesExceptRequest)	Updates `AttendeeCapabilities` except the capabilities listed in an `ExcludedAttendeeIds` table. You use the capabilities with a set of values that control what the capabilities can do, such as `SendReceive` data. For more information about those values, see . When using capabilities, be aware of these corner cases: If you specify `MeetingFeatures:Video:MaxResolution:None` when you create a meeting, all API requests that include `SendReceive`, `Send`, or `Receive` for `AttendeeCapabilities:Video` will be rejected with `ValidationError 400`. If you specify `MeetingFeatures:Content:MaxResolution:None` when you create a meeting, all API requests that include `SendReceive`, `Send`, or `Receive` for `AttendeeCapabilities:Content` will be rejected with `ValidationError 400`. You can't set `content` capabilities to `SendReceive` or `Receive` unless you also set `video` capabilities to `SendReceive` or `Receive`. If you don't set the `video` capability to receive, the response will contain an HTTP 400 Bad Request status code. However, you can set your `video` capability to receive and you set your `content` capability to not receive. When you change an `audio` capability from `None` or `Receive` to `Send` or `SendReceive` , and if the attendee left their microphone unmuted, audio will flow from the attendee to the other meeting participants. When you change a `video` or `content` capability from `None` or `Receive` to `Send` or `SendReceive` , and if the attendee turned on their video or content streams, remote attendees can receive those streams, but only after media renegotiation between the client and the Amazon Chime back-end server.
	BatchUpdateAttendeeCapabilitiesExceptAsync(BatchUpdateAttendeeCapabilitiesExceptRequest, CancellationToken)	Updates `AttendeeCapabilities` except the capabilities listed in an `ExcludedAttendeeIds` table. You use the capabilities with a set of values that control what the capabilities can do, such as `SendReceive` data. For more information about those values, see . When using capabilities, be aware of these corner cases: If you specify `MeetingFeatures:Video:MaxResolution:None` when you create a meeting, all API requests that include `SendReceive`, `Send`, or `Receive` for `AttendeeCapabilities:Video` will be rejected with `ValidationError 400`. If you specify `MeetingFeatures:Content:MaxResolution:None` when you create a meeting, all API requests that include `SendReceive`, `Send`, or `Receive` for `AttendeeCapabilities:Content` will be rejected with `ValidationError 400`. You can't set `content` capabilities to `SendReceive` or `Receive` unless you also set `video` capabilities to `SendReceive` or `Receive`. If you don't set the `video` capability to receive, the response will contain an HTTP 400 Bad Request status code. However, you can set your `video` capability to receive and you set your `content` capability to not receive. When you change an `audio` capability from `None` or `Receive` to `Send` or `SendReceive` , and if the attendee left their microphone unmuted, audio will flow from the attendee to the other meeting participants. When you change a `video` or `content` capability from `None` or `Receive` to `Send` or `SendReceive` , and if the attendee turned on their video or content streams, remote attendees can receive those streams, but only after media renegotiation between the client and the Amazon Chime back-end server.
	CreateAttendee(CreateAttendeeRequest)	Creates a new attendee for an active Amazon Chime SDK meeting. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	CreateAttendeeAsync(CreateAttendeeRequest, CancellationToken)	Creates a new attendee for an active Amazon Chime SDK meeting. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	CreateMeeting(CreateMeetingRequest)	Creates a new Amazon Chime SDK meeting in the specified media Region with no initial attendees. For more information about specifying media Regions, see Amazon Chime SDK Media Regions in the Amazon Chime Developer Guide. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	CreateMeetingAsync(CreateMeetingRequest, CancellationToken)	Creates a new Amazon Chime SDK meeting in the specified media Region with no initial attendees. For more information about specifying media Regions, see Amazon Chime SDK Media Regions in the Amazon Chime Developer Guide. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	CreateMeetingWithAttendees(CreateMeetingWithAttendeesRequest)	Creates a new Amazon Chime SDK meeting in the specified media Region, with attendees. For more information about specifying media Regions, see Amazon Chime SDK Media Regions in the Amazon Chime Developer Guide. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	CreateMeetingWithAttendeesAsync(CreateMeetingWithAttendeesRequest, CancellationToken)	Creates a new Amazon Chime SDK meeting in the specified media Region, with attendees. For more information about specifying media Regions, see Amazon Chime SDK Media Regions in the Amazon Chime Developer Guide. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	DeleteAttendee(DeleteAttendeeRequest)	Deletes an attendee from the specified Amazon Chime SDK meeting and deletes their `JoinToken`. Attendees are automatically deleted when a Amazon Chime SDK meeting is deleted. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	DeleteAttendeeAsync(DeleteAttendeeRequest, CancellationToken)	Deletes an attendee from the specified Amazon Chime SDK meeting and deletes their `JoinToken`. Attendees are automatically deleted when a Amazon Chime SDK meeting is deleted. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	DeleteMeeting(DeleteMeetingRequest)	Deletes the specified Amazon Chime SDK meeting. The operation deletes all attendees, disconnects all clients, and prevents new clients from joining the meeting. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	DeleteMeetingAsync(DeleteMeetingRequest, CancellationToken)	Deletes the specified Amazon Chime SDK meeting. The operation deletes all attendees, disconnects all clients, and prevents new clients from joining the meeting. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	DetermineServiceOperationEndpoint(AmazonWebServiceRequest)	Returns the endpoint that will be used for a particular request.
	GetAttendee(GetAttendeeRequest)	Gets the Amazon Chime SDK attendee details for a specified meeting ID and attendee ID. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	GetAttendeeAsync(GetAttendeeRequest, CancellationToken)	Gets the Amazon Chime SDK attendee details for a specified meeting ID and attendee ID. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	GetMeeting(GetMeetingRequest)	Gets the Amazon Chime SDK meeting details for the specified meeting ID. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	GetMeetingAsync(GetMeetingRequest, CancellationToken)	Gets the Amazon Chime SDK meeting details for the specified meeting ID. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	ListAttendees(ListAttendeesRequest)	Lists the attendees for the specified Amazon Chime SDK meeting. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	ListAttendeesAsync(ListAttendeesRequest, CancellationToken)	Lists the attendees for the specified Amazon Chime SDK meeting. For more information about the Amazon Chime SDK, see Using the Amazon Chime SDK in the Amazon Chime Developer Guide.
	ListTagsForResource(ListTagsForResourceRequest)	Returns a list of the tags available for the specified resource.
	ListTagsForResourceAsync(ListTagsForResourceRequest, CancellationToken)	Returns a list of the tags available for the specified resource.
	StartMeetingTranscription(StartMeetingTranscriptionRequest)	Starts transcription for the specified `meetingId`. For more information, refer to Using Amazon Chime SDK live transcription in the Amazon Chime SDK Developer Guide. If you specify an invalid configuration, a `TranscriptFailed` event will be sent with the contents of the `BadRequestException` generated by Amazon Transcribe. For more information on each parameter and which combinations are valid, refer to the StartStreamTranscription API in the Amazon Transcribe Developer Guide. By default, Amazon Transcribe may use and store audio content processed by the service to develop and improve Amazon Web Services AI/ML services as further described in section 50 of the Amazon Web Services Service Terms. Using Amazon Transcribe may be subject to federal and state laws or regulations regarding the recording or interception of electronic communications. It is your and your end users’ responsibility to comply with all applicable laws regarding the recording, including properly notifying all participants in a recorded session or communication that the session or communication is being recorded, and obtaining all necessary consents. You can opt out from Amazon Web Services using audio content to develop and improve AWS AI/ML services by configuring an AI services opt out policy using Amazon Web Services Organizations.
	StartMeetingTranscriptionAsync(StartMeetingTranscriptionRequest, CancellationToken)	Starts transcription for the specified `meetingId`. For more information, refer to Using Amazon Chime SDK live transcription in the Amazon Chime SDK Developer Guide. If you specify an invalid configuration, a `TranscriptFailed` event will be sent with the contents of the `BadRequestException` generated by Amazon Transcribe. For more information on each parameter and which combinations are valid, refer to the StartStreamTranscription API in the Amazon Transcribe Developer Guide. By default, Amazon Transcribe may use and store audio content processed by the service to develop and improve Amazon Web Services AI/ML services as further described in section 50 of the Amazon Web Services Service Terms. Using Amazon Transcribe may be subject to federal and state laws or regulations regarding the recording or interception of electronic communications. It is your and your end users’ responsibility to comply with all applicable laws regarding the recording, including properly notifying all participants in a recorded session or communication that the session or communication is being recorded, and obtaining all necessary consents. You can opt out from Amazon Web Services using audio content to develop and improve AWS AI/ML services by configuring an AI services opt out policy using Amazon Web Services Organizations.
	StopMeetingTranscription(StopMeetingTranscriptionRequest)	Stops transcription for the specified `meetingId`. For more information, refer to Using Amazon Chime SDK live transcription in the Amazon Chime SDK Developer Guide. By default, Amazon Transcribe may use and store audio content processed by the service to develop and improve Amazon Web Services AI/ML services as further described in section 50 of the Amazon Web Services Service Terms. Using Amazon Transcribe may be subject to federal and state laws or regulations regarding the recording or interception of electronic communications. It is your and your end users’ responsibility to comply with all applicable laws regarding the recording, including properly notifying all participants in a recorded session or communication that the session or communication is being recorded, and obtaining all necessary consents. You can opt out from Amazon Web Services using audio content to develop and improve Amazon Web Services AI/ML services by configuring an AI services opt out policy using Amazon Web Services Organizations.
	StopMeetingTranscriptionAsync(StopMeetingTranscriptionRequest, CancellationToken)	Stops transcription for the specified `meetingId`. For more information, refer to Using Amazon Chime SDK live transcription in the Amazon Chime SDK Developer Guide. By default, Amazon Transcribe may use and store audio content processed by the service to develop and improve Amazon Web Services AI/ML services as further described in section 50 of the Amazon Web Services Service Terms. Using Amazon Transcribe may be subject to federal and state laws or regulations regarding the recording or interception of electronic communications. It is your and your end users’ responsibility to comply with all applicable laws regarding the recording, including properly notifying all participants in a recorded session or communication that the session or communication is being recorded, and obtaining all necessary consents. You can opt out from Amazon Web Services using audio content to develop and improve Amazon Web Services AI/ML services by configuring an AI services opt out policy using Amazon Web Services Organizations.
	TagResource(TagResourceRequest)	The resource that supports tags.
	TagResourceAsync(TagResourceRequest, CancellationToken)	The resource that supports tags.
	UntagResource(UntagResourceRequest)	Removes the specified tags from the specified resources. When you specify a tag key, the action removes both that key and its associated value. The operation succeeds even if you attempt to remove tags from a resource that were already removed. Note the following: To remove tags from a resource, you need the necessary permissions for the service that the resource belongs to as well as permissions for removing tags. For more information, see the documentation for the service whose resource you want to untag. You can only tag resources that are located in the specified Amazon Web Services Region for the calling Amazon Web Services account. Minimum permissions In addition to the `tag:UntagResources` permission required by this operation, you must also have the remove tags permission defined by the service that created the resource. For example, to remove the tags from an Amazon EC2 instance using the `UntagResources` operation, you must have both of the following permissions: `tag:UntagResource` `ChimeSDKMeetings:DeleteTags`
	UntagResourceAsync(UntagResourceRequest, CancellationToken)	Removes the specified tags from the specified resources. When you specify a tag key, the action removes both that key and its associated value. The operation succeeds even if you attempt to remove tags from a resource that were already removed. Note the following: To remove tags from a resource, you need the necessary permissions for the service that the resource belongs to as well as permissions for removing tags. For more information, see the documentation for the service whose resource you want to untag. You can only tag resources that are located in the specified Amazon Web Services Region for the calling Amazon Web Services account. Minimum permissions In addition to the `tag:UntagResources` permission required by this operation, you must also have the remove tags permission defined by the service that created the resource. For example, to remove the tags from an Amazon EC2 instance using the `UntagResources` operation, you must have both of the following permissions: `tag:UntagResource` `ChimeSDKMeetings:DeleteTags`
	UpdateAttendeeCapabilities(UpdateAttendeeCapabilitiesRequest)	The capabilities that you want to update. You use the capabilities with a set of values that control what the capabilities can do, such as `SendReceive` data. For more information about those values, see . When using capabilities, be aware of these corner cases: If you specify `MeetingFeatures:Video:MaxResolution:None` when you create a meeting, all API requests that include `SendReceive`, `Send`, or `Receive` for `AttendeeCapabilities:Video` will be rejected with `ValidationError 400`. If you specify `MeetingFeatures:Content:MaxResolution:None` when you create a meeting, all API requests that include `SendReceive`, `Send`, or `Receive` for `AttendeeCapabilities:Content` will be rejected with `ValidationError 400`. You can't set `content` capabilities to `SendReceive` or `Receive` unless you also set `video` capabilities to `SendReceive` or `Receive`. If you don't set the `video` capability to receive, the response will contain an HTTP 400 Bad Request status code. However, you can set your `video` capability to receive and you set your `content` capability to not receive. When you change an `audio` capability from `None` or `Receive` to `Send` or `SendReceive` , and if the attendee left their microphone unmuted, audio will flow from the attendee to the other meeting participants. When you change a `video` or `content` capability from `None` or `Receive` to `Send` or `SendReceive` , and if the attendee turned on their video or content streams, remote attendees can receive those streams, but only after media renegotiation between the client and the Amazon Chime back-end server.
	UpdateAttendeeCapabilitiesAsync(UpdateAttendeeCapabilitiesRequest, CancellationToken)	The capabilities that you want to update. You use the capabilities with a set of values that control what the capabilities can do, such as `SendReceive` data. For more information about those values, see . When using capabilities, be aware of these corner cases: If you specify `MeetingFeatures:Video:MaxResolution:None` when you create a meeting, all API requests that include `SendReceive`, `Send`, or `Receive` for `AttendeeCapabilities:Video` will be rejected with `ValidationError 400`. If you specify `MeetingFeatures:Content:MaxResolution:None` when you create a meeting, all API requests that include `SendReceive`, `Send`, or `Receive` for `AttendeeCapabilities:Content` will be rejected with `ValidationError 400`. You can't set `content` capabilities to `SendReceive` or `Receive` unless you also set `video` capabilities to `SendReceive` or `Receive`. If you don't set the `video` capability to receive, the response will contain an HTTP 400 Bad Request status code. However, you can set your `video` capability to receive and you set your `content` capability to not receive. When you change an `audio` capability from `None` or `Receive` to `Send` or `SendReceive` , and if the attendee left their microphone unmuted, audio will flow from the attendee to the other meeting participants. When you change a `video` or `content` capability from `None` or `Receive` to `Send` or `SendReceive` , and if the attendee turned on their video or content streams, remote attendees can receive those streams, but only after media renegotiation between the client and the Amazon Chime back-end server.

Version Information

.NET Core App:
Supported in: 3.1

.NET Standard:
Supported in: 2.0

.NET Framework:
Supported in: 4.5, 4.0, 3.5