Snowcone Client Commands for Compute Instances - AWS Snowcone User Guide

Snowcone Client Commands for Compute Instances

The Snowball Edge client is a standalone terminal application that you can run on your local server. It enables you to perform some administrative tasks on your Snowcone device or cluster of devices. For more information about how to use the Snowball Edge client, including how to start and stop services with it, see Using the Snowball Edge Client.

Following, you can find information on the Snowball Edge client commands that are specific to compute instances, including examples of use. For a list of Amazon EC2 commands you can use on your AWS Snowcone device, see Supported AWS CLI Commands for Amazon EC2 on a Snowcone .

Note

Commands related to clusters are not supported and will return an error.

Creating a Launch Configuration to Autostart Amazon EC2 Instances

To automatically start Amazon EC2 compute instances on your AWS Snowcone device after it is unlocked, you can create a launch configuration. To do so, use the snowballEdge create-autostart-configuration command, whose usage is shown following.

Usage

snowballEdge create-autostart-configuration --physical-connector-type [SFP_PLUS or RJ45] --ip-address-assignment [DHCP or STATIC] [--static-ip-address-configuration IpAddress=[IP address],NetMask=[Netmask]] --launch-template-id [--launch-template-version]

Updating a Launch Configuration to Autostart EC2 Instances

To update an existing launch configuration on your Snowcone, use the snowballEdge update-autostart-configuration command. You can find its usage following. To enable or disable a launch configuration, specify the --enabled parameter.

Usage

snowballEdge update-autostart-configuration --autostart-configuration-arn [--physical-connector-type [SFP_PLUS or RJ45]] [--ip-address-assignment [DHCP or STATIC]] [--static-ip-address-configuration IpAddress=[IP address],NetMask=[Netmask]] [--launch-template-id] [--launch-template-version] [--enabled]

Deleting a Launch Configuration to Autostart EC2 Instances

To delete a launch configuration that's no longer in use, use the snowballEdge delete-autostart-configuration command. You can find its usage following.

Usage

snowballEdge delete-autostart-configuration --autostart-configuration-arn

Listing Launch Configurations to Autostart EC2 Instances

To list the launch configurations that you have created on your Snowcone, use the describe-autostart-configurations command. You can find its usage following.

Usage

snowballEdge describe-autostart-configurations

Creating a Virtual Network Interface

To run a compute instance on your Snowcone or start the file interface on your Snowcone, you first create a virtual network interface (VNIC). Each Snowcone has three network interfaces (NICs), the physical network interface controllers for the device. These are the RJ45 ports on the back of the device.

Each VNIC is based on a physical one, and you can have any number of VNICs associated with each NIC. To create a virtual network interface, use the snowballEdge create-virtual-network-interface command.

Note

The --static-ip-address-configuration parameter is valid only when using the STATIC option for the --ip-address-assignment parameter.

Usage

You can use this command in two ways: with the Snowball Edge client configured, or without the Snowball Edge client configured. The following usage example shows the method with the Snowball Edge client configured.

snowballEdge create-virtual-network-interface --ip-address-assignment [DHCP or STATIC] --physical-network-interface-id [physical network interface id] --static-ip-address-configuration IpAddress=[IP address],NetMask=[Netmask]

The following usage example shows the method without the Snowball Edge client configured.

snowballEdge create-virtual-network-interface --endpoint https://[ip address] --manifest-file /path/to/manifest --unlock-code [unlock code] --ip-address-assignment [DHCP or STATIC] --physical-network-interface-id [physical network interface id] --static-ip-address-configuration IpAddress=[IP address],NetMask=[Netmask]

Example: Creating VNICs (Using DHCP)

snowballEdge create-virtual-network-interface --ip-address-assignment dhcp --physical-network-interface-id s.ni-8EXAMPLEaEXAMPLEd { "VirtualNetworkInterface" : { "VirtualNetworkInterfaceArn" : "arn:aws:snowball-device:::interface/s.ni-8EXAMPLE8EXAMPLEf", "PhysicalNetworkInterfaceId" : "s.ni-8EXAMPLEaEXAMPLEd", "IpAddressAssignment" : "DHCP", "IpAddress" : "192.0.2.0", "Netmask" : "255.255.255.0", "DefaultGateway" : "192.0.2.1", "MacAddress" : "EX:AM:PL:E1:23:45" } }

Describing Your Virtual Network Interfaces

To describe the VNICs that you previously created on your device, use the snowballEdge describe-virtual-network-interfaces command. You can find its usage following.

Usage

You can use this command in two ways: with the Snowball Edge client configured, or without the Snowball Edge client configured. The following usage example shows the method with the Snowball Edge client configured.

snowballEdge describe-virtual-network-interfaces

The following usage example shows the method without the Snowball Edge client configured.

snowballEdge describe-virtual-network-interfaces --endpoint https://[ip address] --manifest-file /path/to/manifest --unlock-code [unlock code]

Example: Describing VNICs

snowballEdge describe-virtual-network-interfaces [ { "VirtualNetworkInterfaceArn" : "arn:aws:snowball-device:::interface/s.ni-8EXAMPLE8EXAMPLE8", "PhysicalNetworkInterfaceId" : "s.ni-8EXAMPLEaEXAMPLEd", "IpAddressAssignment" : "DHCP", "IpAddress" : "192.0.2.0", "Netmask" : "255.255.255.0", "DefaultGateway" : "192.0.2.1", "MacAddress" : "EX:AM:PL:E1:23:45" },{ "VirtualNetworkInterfaceArn" : "arn:aws:snowball-device:::interface/s.ni-1EXAMPLE1EXAMPLE1", "PhysicalNetworkInterfaceId" : "s.ni-8EXAMPLEaEXAMPLEd", "IpAddressAssignment" : "DHCP", "IpAddress" : "192.0.2.2", "Netmask" : "255.255.255.0", "DefaultGateway" : "192.0.2.1", "MacAddress" : "12:34:5E:XA:MP:LE" } ]

Updating a Virtual Network Interface

After creating a virtual network interface (VNIC), you can update its configuration using the snowballEdge update-virtual-network-interface command. After providing the Amazon Resource Name (ARN) for a particular VNIC, you provide values only for whatever elements you are updating.

Usage

You can use this command in two ways: with the Snowball Edge client configured, or without the Snowball Edge client configured. The following usage example shows the method with the Snowball Edge client configured.

snowballEdge update-virtual-network-interface --virtual-network-interface-arn [virtual network-interface-arn] --ip-address-assignment [DHCP or STATIC] --physical-network-interface-id [physical network interface id] --static-ip-address-configuration IpAddress=[IP address],NetMask=[Netmask]

The following usage example shows the method without the Snowball Edge client configured.

snowballEdge update-virtual-network-interface --endpoint https://[ip address] --manifest-file /path/to/manifest --unlock-code [unlock code] --virtual-network-interface-arn [virtual network-interface-arn] --ip-address-assignment [DHCP or STATIC] --physical-network-interface-id [physical network interface id] --static-ip-address-configuration IpAddress=[IP address],NetMask=[Netmask]

Example: Updating a VNIC (Using DHCP)

snowballEdge update-virtual-network-interface --virtual-network-interface-arn arn:aws:snowball-device:::interface/s.ni-8EXAMPLEbEXAMPLEd --ip-address-assignment dhcp

Deleting a Virtual Network Interface

To delete a virtual network interface, you can use the snowballEdge delete-virtual-network-interface command.

Usage

You can use this command in two ways: with the Snowball Edge client configured, or without the Snowball Edge client configured. The following usage example shows the method with the Snowball Edge client configured.

snowballEdge delete-virtual-network-interface --virtual-network-interface-arn [virtual network-interface-arn]

The following usage example shows the method without the Snowball Edge client configured.

snowballEdge delete-virtual-network-interface --endpoint https://[ip address] --manifest-file /path/to/manifest --unlock-code [unlock code] --virtual-network-interface-arn [virtual network-interface-arn]

Example: Deleting a VNIC

snowballEdge delete-virtual-network-interface --virtual-network-interface-arn arn:aws:snowball-device:::interface/s.ni-8EXAMPLEbEXAMPLEd