AWS CLI Command Reference

Note:

You are viewing the documentation for an older major version of the AWS CLI (version 1).

AWS CLI version 2, the latest major version of AWS CLI, is now stable and recommended for general use. To view this page for the AWS CLI version 2, click here. For more information see the AWS CLI version 2 installation instructions and migration guide.

[ aws . rekognition ]

detect-custom-labels

Description

Note

This operation applies only to Amazon Rekognition Custom Labels.

Detects custom labels in a supplied image by using an Amazon Rekognition Custom Labels model.

You specify which version of a model version to use by using the ProjectVersionArn input parameter.

You pass the input image as base64-encoded image bytes or as a reference to an image in an Amazon S3 bucket. If you use the AWS CLI to call Amazon Rekognition operations, passing image bytes is not supported. The image must be either a PNG or JPEG formatted file.

For each object that the model version detects on an image, the API returns a (CustomLabel ) object in an array (CustomLabels ). Each CustomLabel object provides the label name (Name ), the level of confidence that the image contains the object (Confidence ), and object location information, if it exists, for the label on the image (Geometry ). Note that for the DetectCustomLabelsLabels operation, Polygons are not returned in the Geometry section of the response.

To filter labels that are returned, specify a value for MinConfidence . DetectCustomLabelsLabels only returns labels with a confidence that's higher than the specified value. The value of MinConfidence maps to the assumed threshold values created during training. For more information, see Assumed threshold in the Amazon Rekognition Custom Labels Developer Guide. Amazon Rekognition Custom Labels metrics expresses an assumed threshold as a floating point value between 0-1. The range of MinConfidence normalizes the threshold value to a percentage value (0-100). Confidence responses from DetectCustomLabels are also returned as a percentage. You can use MinConfidence to change the precision and recall or your model. For more information, see Analyzing an image in the Amazon Rekognition Custom Labels Developer Guide.

If you don't specify a value for MinConfidence , DetectCustomLabels returns labels based on the assumed threshold of each label.

This is a stateless API operation. That is, the operation does not persist any data.

This operation requires permissions to perform the rekognition:DetectCustomLabels action.

For more information, see Analyzing an image in the Amazon Rekognition Custom Labels Developer Guide.

See also: AWS API Documentation

Synopsis

  detect-custom-labels
--project-version-arn <value>
[--image <value>]
[--max-results <value>]
[--min-confidence <value>]
[--image-bytes <value>]
[--cli-input-json <value>]
[--generate-cli-skeleton <value>]
[--debug]
[--endpoint-url <value>]
[--no-verify-ssl]
[--no-paginate]
[--output <value>]
[--query <value>]
[--profile <value>]
[--region <value>]
[--version <value>]
[--color <value>]
[--no-sign-request]
[--ca-bundle <value>]
[--cli-read-timeout <value>]
[--cli-connect-timeout <value>]

Options

--project-version-arn (string)

The ARN of the model version that you want to use. Only models associated with Custom Labels projects accepted by the operation. If a provided ARN refers to a model version associated with a project for a different feature type, then an InvalidParameterException is returned.

--image (structure)

Provides the input image either as bytes or an S3 object.

You pass image bytes to an Amazon Rekognition API operation by using the Bytes property. For example, you would use the Bytes property to pass an image loaded from a local file system. Image bytes passed by using the Bytes property must be base64-encoded. Your code may not need to encode image bytes if you are using an AWS SDK to call Amazon Rekognition API operations.

For more information, see Analyzing an Image Loaded from a Local File System in the Amazon Rekognition Developer Guide.

You pass images stored in an S3 bucket to an Amazon Rekognition API operation by using the S3Object property. Images stored in an S3 bucket do not need to be base64-encoded.

The region for the S3 bucket containing the S3 object must match the region you use for Amazon Rekognition operations.

If you use the AWS CLI to call Amazon Rekognition operations, passing image bytes using the Bytes property is not supported. You must first upload the image to an Amazon S3 bucket and then call the operation using the S3Object property.

For Amazon Rekognition to process an S3 object, the user must have permission to access the S3 object. For more information, see How Amazon Rekognition works with IAM in the Amazon Rekognition Developer Guide.

To specify a local file use --image-bytes instead.

Bytes -> (blob)

Blob of image bytes up to 5 MBs. Note that the maximum image size you can pass to DetectCustomLabels is 4MB.

S3Object -> (structure)

Identifies an S3 object as the image source.

Bucket -> (string)

Name of the S3 bucket.

Name -> (string)

S3 object key name.

Version -> (string)

If the bucket is versioning enabled, you can specify the object version.

Shorthand Syntax:

Bytes=blob,S3Object={Bucket=string,Name=string,Version=string}

JSON Syntax:

{
  "Bytes": blob,
  "S3Object": {
    "Bucket": "string",
    "Name": "string",
    "Version": "string"
  }
}

--max-results (integer)

Maximum number of results you want the service to return in the response. The service returns the specified number of highest confidence labels ranked from highest confidence to lowest.

--min-confidence (float)

Specifies the minimum confidence level for the labels to return. DetectCustomLabels doesn't return any labels with a confidence value that's lower than this specified value. If you specify a value of 0, DetectCustomLabels returns all labels, regardless of the assumed threshold applied to each label. If you don't specify a value for MinConfidence , DetectCustomLabels returns labels based on the assumed threshold of each label.

--image-bytes (blob)

The content of the image to be uploaded. To specify the content of a local file use the fileb:// prefix. Example: fileb://image.png

--cli-input-json (string) Performs service operation based on the JSON string provided. The JSON string follows the format provided by --generate-cli-skeleton. If other arguments are provided on the command line, the CLI values will override the JSON-provided values. It is not possible to pass arbitrary binary values using a JSON-provided value as the string will be taken literally.

--generate-cli-skeleton (string) Prints a JSON skeleton to standard output without sending an API request. If provided with no value or the value input, prints a sample input JSON that can be used as an argument for --cli-input-json. If provided with the value output, it validates the command inputs and returns a sample output JSON for that command.

Global Options

--debug (boolean)

Turn on debug logging.

--endpoint-url (string)

Override command's default URL with the given URL.

--no-verify-ssl (boolean)

By default, the AWS CLI uses SSL when communicating with AWS services. For each SSL connection, the AWS CLI will verify SSL certificates. This option overrides the default behavior of verifying SSL certificates.

--no-paginate (boolean)

Disable automatic pagination.

--output (string)

The formatting style for command output.

  • json
  • text
  • table

--query (string)

A JMESPath query to use in filtering the response data.

--profile (string)

Use a specific profile from your credential file.

--region (string)

The region to use. Overrides config/env settings.

--version (string)

Display the version of this tool.

--color (string)

Turn on/off color output.

  • on
  • off
  • auto

--no-sign-request (boolean)

Do not sign requests. Credentials will not be loaded if this argument is provided.

--ca-bundle (string)

The CA certificate bundle to use when verifying SSL certificates. Overrides config/env settings.

--cli-read-timeout (int)

The maximum socket read time in seconds. If the value is set to 0, the socket read will be blocking and not timeout. The default value is 60 seconds.

--cli-connect-timeout (int)

The maximum socket connect time in seconds. If the value is set to 0, the socket connect will be blocking and not timeout. The default value is 60 seconds.

Output

CustomLabels -> (list)

An array of custom labels detected in the input image.

(structure)

A custom label detected in an image by a call to DetectCustomLabels .

Name -> (string)

The name of the custom label.

Confidence -> (float)

The confidence that the model has in the detection of the custom label. The range is 0-100. A higher value indicates a higher confidence.

Geometry -> (structure)

The location of the detected object on the image that corresponds to the custom label. Includes an axis aligned coarse bounding box surrounding the object and a finer grain polygon for more accurate spatial information.

BoundingBox -> (structure)

An axis-aligned coarse representation of the detected item's location on the image.

Width -> (float)

Width of the bounding box as a ratio of the overall image width.

Height -> (float)

Height of the bounding box as a ratio of the overall image height.

Left -> (float)

Left coordinate of the bounding box as a ratio of overall image width.

Top -> (float)

Top coordinate of the bounding box as a ratio of overall image height.

Polygon -> (list)

Within the bounding box, a fine-grained polygon around the detected item.

(structure)

The X and Y coordinates of a point on an image or video frame. The X and Y values are ratios of the overall image size or video resolution. For example, if an input image is 700x200 and the values are X=0.5 and Y=0.25, then the point is at the (350,50) pixel coordinate on the image.

An array of Point objects makes up a Polygon . A Polygon is returned by DetectText and by DetectCustomLabels Polygon represents a fine-grained polygon around a detected item. For more information, see Geometry in the Amazon Rekognition Developer Guide.

X -> (float)

The value of the X coordinate for a point on a Polygon .

Y -> (float)

The value of the Y coordinate for a point on a Polygon .