CreateVirtualNode - AWS App Mesh

CreateVirtualNode

Creates a virtual node within a service mesh.

A virtual node acts as a logical pointer to a particular task group, such as an Amazon ECS service or a Kubernetes deployment. When you create a virtual node, you can specify the service discovery information for your task group, and whether the proxy running in a task group will communicate with other proxies using Transport Layer Security (TLS).

You define a listener for any inbound traffic that your virtual node expects. Any virtual service that your virtual node expects to communicate to is specified as a backend.

The response metadata for your new virtual node contains the arn that is associated with the virtual node. Set this value to the full ARN; for example, arn:aws:appmesh:us-west-2:123456789012:myMesh/default/virtualNode/myApp) as the APPMESH_RESOURCE_ARN environment variable for your task group's Envoy proxy container in your task definition or pod spec. This is then mapped to the node.id and node.cluster Envoy parameters.

Note

By default, App Mesh uses the name of the resource you specified in APPMESH_RESOURCE_ARN when Envoy is referring to itself in metrics and traces. You can override this behavior by setting the APPMESH_RESOURCE_CLUSTER environment variable with your own name.

For more information about virtual nodes, see Virtual nodes. You must be using 1.15.0 or later of the Envoy image when setting these variables. For more information aboutApp Mesh Envoy variables, see Envoy image in the AWS App Mesh User Guide.

Request Syntax

PUT /v20190125/meshes/meshName/virtualNodes?meshOwner=meshOwner HTTP/1.1 Content-type: application/json { "clientToken": "string", "spec": { "backendDefaults": { "clientPolicy": { "tls": { "certificate": { ... }, "enforce": boolean, "ports": [ number ], "validation": { "subjectAlternativeNames": { "match": { "exact": [ "string" ] } }, "trust": { ... } } } } }, "backends": [ { ... } ], "listeners": [ { "connectionPool": { ... }, "healthCheck": { "healthyThreshold": number, "intervalMillis": number, "path": "string", "port": number, "protocol": "string", "timeoutMillis": number, "unhealthyThreshold": number }, "outlierDetection": { "baseEjectionDuration": { "unit": "string", "value": number }, "interval": { "unit": "string", "value": number }, "maxEjectionPercent": number, "maxServerErrors": number }, "portMapping": { "port": number, "protocol": "string" }, "timeout": { ... }, "tls": { "certificate": { ... }, "mode": "string", "validation": { "subjectAlternativeNames": { "match": { "exact": [ "string" ] } }, "trust": { ... } } } } ], "logging": { "accessLog": { ... } }, "serviceDiscovery": { ... } }, "tags": [ { "key": "string", "value": "string" } ], "virtualNodeName": "string" }

URI Request Parameters

The request uses the following URI parameters.

meshName

The name of the service mesh to create the virtual node in.

Length Constraints: Minimum length of 1. Maximum length of 255.

Required: Yes

meshOwner

The AWS IAM account ID of the service mesh owner. If the account ID is not your own, then the account that you specify must share the mesh with your account before you can create the resource in the service mesh. For more information about mesh sharing, see Working with shared meshes.

Length Constraints: Fixed length of 12.

Request Body

The request accepts the following data in JSON format.

clientToken

Unique, case-sensitive identifier that you provide to ensure the idempotency of the request. Up to 36 letters, numbers, hyphens, and underscores are allowed.

Type: String

Required: No

spec

The virtual node specification to apply.

Type: VirtualNodeSpec object

Required: Yes

tags

Optional metadata that you can apply to the virtual node to assist with categorization and organization. Each tag consists of a key and an optional value, both of which you define. Tag keys can have a maximum character length of 128 characters, and tag values can have a maximum length of 256 characters.

Type: Array of TagRef objects

Array Members: Minimum number of 0 items. Maximum number of 50 items.

Required: No

virtualNodeName

The name to use for the virtual node.

Type: String

Length Constraints: Minimum length of 1. Maximum length of 255.

Required: Yes

Response Syntax

HTTP/1.1 200 Content-type: application/json { "meshName": "string", "metadata": { "arn": "string", "createdAt": number, "lastUpdatedAt": number, "meshOwner": "string", "resourceOwner": "string", "uid": "string", "version": number }, "spec": { "backendDefaults": { "clientPolicy": { "tls": { "certificate": { ... }, "enforce": boolean, "ports": [ number ], "validation": { "subjectAlternativeNames": { "match": { "exact": [ "string" ] } }, "trust": { ... } } } } }, "backends": [ { ... } ], "listeners": [ { "connectionPool": { ... }, "healthCheck": { "healthyThreshold": number, "intervalMillis": number, "path": "string", "port": number, "protocol": "string", "timeoutMillis": number, "unhealthyThreshold": number }, "outlierDetection": { "baseEjectionDuration": { "unit": "string", "value": number }, "interval": { "unit": "string", "value": number }, "maxEjectionPercent": number, "maxServerErrors": number }, "portMapping": { "port": number, "protocol": "string" }, "timeout": { ... }, "tls": { "certificate": { ... }, "mode": "string", "validation": { "subjectAlternativeNames": { "match": { "exact": [ "string" ] } }, "trust": { ... } } } } ], "logging": { "accessLog": { ... } }, "serviceDiscovery": { ... } }, "status": { "status": "string" }, "virtualNodeName": "string" }

Response Elements

If the action is successful, the service sends back an HTTP 200 response.

The following data is returned in JSON format by the service.

meshName

The name of the service mesh that the virtual node resides in.

Type: String

Length Constraints: Minimum length of 1. Maximum length of 255.

metadata

The associated metadata for the virtual node.

Type: ResourceMetadata object

spec

The specifications of the virtual node.

Type: VirtualNodeSpec object

status

The current status for the virtual node.

Type: VirtualNodeStatus object

virtualNodeName

The name of the virtual node.

Type: String

Length Constraints: Minimum length of 1. Maximum length of 255.

Errors

BadRequestException

The request syntax was malformed. Check your request syntax and try again.

HTTP Status Code: 400

ConflictException

The request contains a client token that was used for a previous update resource call with different specifications. Try the request again with a new client token.

HTTP Status Code: 409

ForbiddenException

You don't have permissions to perform this action.

HTTP Status Code: 403

InternalServerErrorException

The request processing has failed because of an unknown error, exception, or failure.

HTTP Status Code: 500

LimitExceededException

You have exceeded a service limit for your account. For more information, see Service Limits in the AWS App Mesh User Guide.

HTTP Status Code: 400

NotFoundException

The specified resource doesn't exist. Check your request syntax and try again.

HTTP Status Code: 404

ServiceUnavailableException

The request has failed due to a temporary failure of the service.

HTTP Status Code: 503

TooManyRequestsException

The maximum request rate permitted by the App Mesh APIs has been exceeded for your account. For best results, use an increasing or variable sleep interval between requests.

HTTP Status Code: 429

Examples

In the following example or examples, the Authorization header contents (AUTHPARAMS) must be replaced with an AWS Signature Version 4 signature. For more information about creating these signatures, see Signature Version 4 Signing Process in the AWS General Reference.

You need to learn how to sign HTTP requests only if you intend to manually create them. When you use the AWS Command Line Interface (AWS CLI) or one of the AWS SDKs to make requests to AWS, these tools automatically sign the requests for you with the access key that you specify when you configure the tools. When you use these tools, you don't need to learn how to sign requests yourself.

Example

The following example creates a virtual node named colorgateway-vn in the ecs-mesh service mesh.

Sample Request

PUT /v20190125/meshes/ecs-mesh/virtualNodes HTTP/1.1 Host: appmesh.us-east-1.amazonaws.com Accept-Encoding: identity User-Agent: aws-cli/1.16.56 Python/3.7.0 Darwin/17.7.0 botocore/1.12.46 X-Amz-Date: 20190227T192431Z Authorization: AUTHPARAMS { "spec": { "listeners": [ { "portMapping": { "port": 9080, "protocol": "http" } } ], "serviceDiscovery": { "dns": { "hostname": "colorgateway.default.svc.cluster.local" } }, "backends": [ { "virtualService": { "virtualServiceName": "tcpecho.default.svc.cluster.local" } }, { "virtualService": { "virtualServiceName": "colorteller.default.svc.cluster.local" } } ] }, "virtualNodeName": "colorgateway-vn", "clientToken": "c148ccbb-3619-49da-bb3e-4561eb5370c4" }

Sample Response

HTTP/1.1 200 OK x-amzn-requestid: cc29e2dd-e4c4-4d6e-9424-e9211580f70e content-type: application/json content-length: 687 date: Wed, 27 Feb 2019 19:24:31 GMT x-envoy-upstream-service-time: 132 server: envoy Connection: keep-alive { "meshName": "ecs-mesh", "metadata": { "arn": "arn:aws:appmesh:us-east-1:123456789012:mesh/ecs-mesh/virtualNode/colorgateway-vn", "createdAt": 1.551295471546E9, "lastUpdatedAt": 1.551295471546E9, "uid": "887cfab8-a727-41b2-8cd7-2fdebfd6304e", "version": 1 }, "spec": { "backends": [{ "virtualService": { "virtualServiceName": "tcpecho.default.svc.cluster.local" } }, { "virtualService": { "virtualServiceName": "colorteller.default.svc.cluster.local" } }], "listeners": [{ "healthCheck": null, "portMapping": { "port": 9080, "protocol": "http" } }], "logging": null, "serviceDiscovery": { "dns": { "hostname": "colorgateway.default.svc.cluster.local" } } }, "status": { "status": "ACTIVE" }, "virtualNodeName": "colorgateway-vn" }

See Also

For more information about using this API in one of the language-specific AWS SDKs, see the following: